Kernel-build-reports June 2016

kernel-build-reports@lists.linaro.org

16 participants
398 discussions

arm-soc build: 20 warnings 2 failures (arm-soc/v4.7-rc1-41-gb564cfc)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: b564cfc ARM: SoC: Document merges Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v4.7-rc1-41-gb564cfc/ Runtime: 67m 33s Passed: 118 Failed: 2 Warnings: 20 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: arm64.allmodconfig powerpc.pasemi_defconfig ------------------------------------------------------------------------------- Errors: arm64.allmodconfig: /work/build/batch/samples/seccomp/bpf-fancy.c:13:27: fatal error: linux/seccomp.h: No such file or directory /work/build/batch/samples/seccomp/bpf-helper.h:20:50: fatal error: linux/seccomp.h: No such file or directory /work/build/batch/samples/seccomp/dropper.c:20:27: fatal error: linux/seccomp.h: No such file or directory /work/build/batch/samples/seccomp/bpf-direct.c:21:27: fatal error: linux/seccomp.h: No such file or directory powerpc.pasemi_defconfig: /work/build/batch/arch/powerpc/kernel/ptrace.c:379:104: error: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Werror=array-bounds] /work/build/batch/arch/powerpc/kernel/ptrace.c:407:104: error: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Werror=array-bounds] Warnings: 1 drivers/block/floppy.c:1777:44: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:1779:44: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:4487:45: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:4495:45: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:810:44: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:825:43: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:826:43: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/infiniband/core/cma.c:1253:12: warning: 'src_addr_storage.sin_addr.s_addr' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 drivers/of/of_reserved_mem.c:131:180: warning: comparison of distinct pointer types lacks a cast 1 drivers/of/of_reserved_mem.c:131:182: warning: comparison of distinct pointer types lacks a cast 1 drivers/of/of_reserved_mem.c:131:364: warning: comparison of distinct pointer types lacks a cast 1 drivers/of/of_reserved_mem.c:131:368: warning: comparison of distinct pointer types lacks a cast 1 drivers/phy/phy-exynos-mipi-video.c:238:13: warning: 'val' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 drivers/staging/iio/adc/ad7606_spi.c:24:18: warning: 'data' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 fs/reiserfs/ibalance.c:1156:2: warning: 'new_insert_key' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 include/sound/control.h:219:9: warning: 'master_vol' may be used uninitialized in this function [-Wmaybe-uninitialized] 2 drivers/net/wireless/intel/iwlegacy/3945.c:1022:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] 2 drivers/xen/balloon.c:154:13: warning: 'release_memory_resource' declared 'static' but never defined [-Wunused-function] Section mismatches:

8 years

arm-soc boot: 43 passed 11 failed (arm-soc/v4.7-rc1-41-gb564cfc)

by Olof's autobooter

Full logs are available at http://arm-soc.lixom.net/bootlogs/arm-soc/v4.7-rc1-41-gb564cfc/ Failed boards: arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver arm-tegra_defconfig : FAILED 1:51.41 beaver arm-multi_v7_defconfig : FAILED 1:56.46 beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:52.86 omap5uevm arm-multi_v7_defconfig : FAILED 0:50.00 omap5uevm arm-multi_lpae_defconfig : FAILED 2:12.67 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-exynos_defconfig : FAILED 1:49.57 pi arm-multi_v7_defconfig : FAILED 2:04.85 pi arm-multi_lpae_defconfig : FAILED 2:13.62 pi multi_v7_nosmp_defconfig : NO BUILD pit arm-exynos_defconfig : FAILED 1:49.06 pit arm-multi_v7_defconfig : FAILED 2:07.30 pit arm-multi_lpae_defconfig : FAILED 2:02.87 pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD Successful boards: apc arm-vt8500_v6_v7_defconfig : passed 1:22.43 arndale arm-exynos_defconfig : passed 2:16.40 arndale arm-multi_v7_defconfig : passed 1:25.03 arndale arm-multi_lpae_defconfig : passed 1:29.74 bbb arm-omap2plus_defconfig : passed 1:42.37 bbb arm-multi_v7_defconfig : passed 1:24.57 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:51.06 beagleboard-x15 arm-multi_v7_defconfig : warnings 1:16.11 beagleboard-x15 arm-multi_lpae_defconfig : warnings 0:57.90 capri arm-bcm_defconfig : passed 0:49.56 capri arm-multi_v7_defconfig : passed 1:12.72 chitra powerpc-ppc64_defconfig : passed 2:18.40 colombus arm-sunxi_defconfig : passed 2:27.42 colombus arm-multi_v7_defconfig : passed 2:32.87 colombus arm-multi_lpae_defconfig : passed 2:35.97 cosmic arm-imx_v6_v7_defconfig : passed 3:23.59 cosmic arm-multi_v7_defconfig : passed 3:22.03 cubie arm-sunxi_defconfig : passed 0:53.88 cubie arm-multi_v7_defconfig : passed 1:00.57 cubie2 arm-sunxi_defconfig : passed 0:52.48 cubie2 arm-multi_v7_defconfig : passed 1:02.67 cubie2 arm-multi_lpae_defconfig : passed 1:07.31 cubox arm-multi_v7_defconfig : passed 1:13.12 cubox arm-mvebu_v7_defconfig : passed 1:26.58 dalmore arm-tegra_defconfig : warnings 1:29.01 dalmore arm-multi_v7_defconfig : warnings 1:39.30 dalmore arm-multi_lpae_defconfig : warnings 1:35.86 jetsontk1 arm-tegra_defconfig : warnings 0:53.42 jetsontk1 arm-multi_v7_defconfig : warnings 0:50.18 jetsontk1 arm-multi_lpae_defconfig : warnings 1:04.79 omap5uevm arm-omap2plus_defconfig : passed 1:14.91 parallella arm-multi_v7_defconfig : passed 2:53.43 seaboard arm-tegra_defconfig : warnings 1:04.82 seaboard arm-multi_v7_defconfig : warnings 0:58.19 seattle arm64-defconfig : passed 2:56.34 snow arm-exynos_defconfig : passed 2:10.09 snow arm-multi_v7_defconfig : passed 2:04.98 snow arm-multi_lpae_defconfig : passed 2:01.18 snowball arm-multi_v7_defconfig : passed 1:39.87 trimslice arm-tegra_defconfig : warnings 2:56.24 trimslice arm-multi_v7_defconfig : warnings 1:44.17 wandboard arm-imx_v6_v7_defconfig : passed 1:12.50 wandboard arm-multi_v7_defconfig : passed 1:26.26 Offline boards: colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:17.72 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:34.64 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:30.93 hummingboard arm-multi_v7_defconfig : OFFLINE 2:16.06 pandaes arm-omap2plus_defconfig : OFFLINE 2:18.27 pandaes arm-multi_v7_defconfig : OFFLINE 2:50.63 rk3288evb arm-multi_v7_defconfig : OFFLINE 1:00.45 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:43.34 sama5 arm-sama5_defconfig : OFFLINE 2:24.04 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:30.88 snowball arm-u8500_defconfig : OFFLINE 1:58.24 socfpga arm-socfpga_defconfig : OFFLINE 2:29.09 socfpga arm-multi_v7_defconfig : OFFLINE 2:13.49 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.408085] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.415043] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.421562] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.428504] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.434089] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.441100] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.451100] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.462311] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.468930] [drm] No driver support for vblank timestamp query. [ 3.474871] drm drm: No connectors reported connected with modes [ 3.480885] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.505980] Console: switching to colour frame buffer device 128x48 [ 3.518133] drm drm: fb0: frame buffer device [ 3.533357] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.544168] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.550633] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.556043] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.563883] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.578368] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.585127] hub 1-0:1.0: USB hub found [ 3.588906] hub 1-0:1.0: 1 port detected [ 3.593827] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.599243] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.606982] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.618361] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.625033] hub 2-0:1.0: USB hub found [ 3.628802] hub 2-0:1.0: 1 port detected [ 3.637600] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.651324] vdd_sata,avdd_plle: disabling [ 3.656045] usb1_vbus: disabling [ 3.660135] Waiting for root device /dev/mmcblk0p1... [ 3.938367] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.876971] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:53]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:54]: got exception: timeout ~$off [PYBOOT] [beaver 01:55]: Done. ======================================================================== Board beaver-arm-tegra_defconfig failure log: ------------------------------------------------- [ 6.414223] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 6.421268] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.426869] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.434392] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.444393] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.457085] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.463705] [drm] No driver support for vblank timestamp query. [ 6.469707] drm drm: No connectors reported connected with modes [ 6.475715] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.502787] Console: switching to colour frame buffer device 128x48 [ 6.514582] drm drm: fb0: frame buffer device [ 6.541089] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.550389] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.556866] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.562299] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.570271] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.591094] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.598994] hub 1-0:1.0: USB hub found [ 6.602776] hub 1-0:1.0: 1 port detected [ 6.607579] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.613003] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.620892] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.641089] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.648864] hub 2-0:1.0: USB hub found [ 6.652638] hub 2-0:1.0: 1 port detected [ 6.660804] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.678991] vdd_sata,avdd_plle: disabling [ 6.683500] usb1_vbus: disabling [ 6.686909] ALSA device list: [ 6.689865] #0: NVIDIA Tegra Beaver [ 6.694091] Waiting for root device /dev/mmcblk0p1... [ 6.971102] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 7.972796] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:48]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:49]: got exception: timeout ~$off [PYBOOT] [beaver 01:50]: Done. ======================================================================== Board odroidu3-arm-exynos_defconfig failure log: ------------------------------------------------- [ 1.777788] usbhid: USB HID core driver [ 1.786388] NET: Registered protocol family 10 [ 1.787000] sit: IPv6 over IPv4 tunneling driver [ 1.791780] NET: Registered protocol family 17 [ 1.795042] NET: Registered protocol family 15 [ 1.799534] Key type dns_resolver registered [ 1.803841] Registering SWP/SWPB emulation handler [ 1.811823] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.816407] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.823794] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.830954] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.837534] [drm] No driver support for vblank timestamp query. [ 1.843451] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.849805] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.855006] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.862231] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.871287] mmc1: new high speed MMC card at address 0001 [ 1.876857] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.880824] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.886762] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.887222] max98090 1-0010: MAX98090 REVID=0x43 [ 1.889520] max98090 1-0010: use default 2.8v micbias [ 1.905203] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.907589] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.914521] mmcblk1: p1 p2 [ 1.918034] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.956964] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 1.979198] VDD10_HDMI_1.0V: disabling [ 1.979926] vdd_g3d: disabling [ 1.980993] BUCK8_2.8V: disabling [ 1.985069] ALSA device list: [ 1.986619] #0: Odroid-U3 [ 1.990493] Waiting for root device /dev/mmcblk0p2... [PYBOOT] [odroidu3 01:49]: Timed out waiting for "<type 'str'>": [PYBOOT] [odroidu3 01:50]: got exception: timeout ~$off [PYBOOT] [odroidu3 01:52]: Done. ======================================================================== Board omap5uevm-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.743753] 9e00: ee70538c 00000001 ee18ea40 ee619e80 ee001f00 ee609e30 c05ce60c 00000072 [ 2.752312] 9e20: 80000033 ffffffff 00000051 c05ce598 ee705380 c143ba24 024080c0 c0f1ba04 [ 2.760877] 9e40: c1342728 c1342760 ee1a4810 ee1a4810 ee705350 ee1a4810 c13c3914 ee2acf00 [ 2.769444] 9e60: 0000000e ee00ac00 ee2a8880 c05ce95c ee1a4810 ee705310 c1450f58 c07ab434 [ 2.777996] 9e80: ee1a4810 c1450f50 c1450f58 c078dba4 00000000 ee609ec8 c078de90 00000001 [ 2.786550] 9ea0: ee2acf00 00000000 ee00ac00 c078c148 ee03fb70 ee647038 ee1a4810 ee1a4844 [ 2.795112] 9ec0: c13a69e8 c078da40 ee1a4810 00000001 ee609f24 ee1a4810 ee1a4810 c13a69e8 [ 2.803671] 9ee0: c13a6808 c078cf24 ee1a4810 c13a67e8 c13a67e8 c078d3b0 c13a681c ee2a8880 [ 2.812230] 9f00: ee00ac00 00000000 ee2acf00 c035761c c1302100 ee00ac18 ee00ac00 ee2a8898 [ 2.820794] 9f20: 00000088 c1302100 ee00ac18 ee608000 ee00ac00 c035828c ee2ab0c0 ee2a8880 [ 2.829354] 9f40: c0358254 00000000 ee2ab0c0 ee2a8880 c0358254 00000000 00000000 00000000 [ 2.837917] 9f60: 00000000 c035d050 00000001 00000000 ace3081a ee2a8880 00000000 00000000 [ 2.846479] 9f80: ee609f80 ee609f80 00000001 00010001 ee609f90 ee609f90 ee2ab0c0 ee2ab0c0 [ 2.855038] 9fa0: c035cf74 00000000 00000000 c0307d78 00000000 00000000 00000000 00000000 [ 2.863596] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.872150] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 2089c9e5 251020b1 [ 2.880715] [<c035d478>] (kthread_data) from [<c0358870>] (wq_worker_sleeping+0x8/0xd0) [ 2.889099] [<c0358870>] (wq_worker_sleeping) from [<c0b84c90>] (__schedule+0x374/0x584) [ 2.897572] [<c0b84c90>] (__schedule) from [<c0b84ee4>] (schedule+0x44/0x9c) [ 2.904955] [<c0b84ee4>] (schedule) from [<c034473c>] (do_exit+0x67c/0xa20) [ 2.912248] [<c034473c>] (do_exit) from [<c030bdc0>] (die+0x410/0x474) [ 2.919088] [<c030bdc0>] (die) from [<c031cc7c>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 2.927375] [<c031cc7c>] (__do_kernel_fault.part.0) from [<c0317cd8>] (do_page_fault+0x370/0x384) [ 2.936669] [<c0317cd8>] (do_page_fault) from [<c030138c>] (do_PrefetchAbort+0x38/0x9c) [ 2.945052] [<c030138c>] (do_PrefetchAbort) from [<c030c60c>] (__pabt_svc+0x4c/0x80) [ 2.953161] Exception stack(0xee609de0 to 0xee609e28) [ 2.958452] 9de0: ffffffff ee18ea41 00000073 00000034 00000000 ee620e10 00000000 ee620e10 [ 2.967013] 9e00: ee70538c 00000001 ee18ea40 ee619e80 ee001f00 ee609e30 c05ce60c 00000072 [ 2.975575] 9e20: 80000033 ffffffff [ 2.979225] [<c030c60c>] (__pabt_svc) from [<00000072>] (0x72) [ 2.985328] Code: ebff87ef e1a00006 e8bd81f0 e59032f8 (e5130014) [ 2.991709] ---[ end trace 4ead2a17025ad5a2 ]--- [ 2.996540] Fixing recursive fault but reboot is needed! [PYBOOT] [omap5uevm 02:09]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 02:10]: got exception: timeout ~$off [PYBOOT] [omap5uevm 02:11]: Done. ======================================================================== Board omap5uevm-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.153716] Code: 3afffff6 e8bd8070 e30f3e84 e34c3133 (e593200c) [ 2.153723] ---[ end trace 0e9de1ce53a8cbf9 ]--- [ 2.153726] Kernel panic - not syncing: Fatal exception in interrupt [ 2.155363] CPU1: stopping [ 2.155367] CPU: 1 PID: 73 Comm: kworker/u4:1 Tainted: G D 4.7.0-rc1-00041-gb564cfc #1 [ 2.155368] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.155376] Workqueue: deferwq deferred_probe_work_func [ 2.155385] [<c031038c>] (unwind_backtrace) from [<c030b9ac>] (show_stack+0x10/0x14) [ 2.155392] [<c030b9ac>] (show_stack) from [<c0590ff4>] (dump_stack+0x88/0x9c) [ 2.155398] [<c0590ff4>] (dump_stack) from [<c030eb3c>] (handle_IPI+0x174/0x194) [ 2.155403] [<c030eb3c>] (handle_IPI) from [<c03017e8>] (gic_handle_irq+0x94/0x98) [ 2.155407] [<c03017e8>] (gic_handle_irq) from [<c030c514>] (__irq_svc+0x54/0x70) [ 2.155409] Exception stack(0xee603cc8 to 0xee603d10) [ 2.155414] 3cc0: 00000000 0000000d 00000002 60000013 000000fe 00000000 [ 2.155418] 3ce0: 00000004 00000061 c1433a30 00000006 00000000 000000fd 00000000 ee603d18 [ 2.155421] 3d00: c06ede74 c03839b8 60000013 ffffffff [ 2.155425] [<c030c514>] (__irq_svc) from [<c03839b8>] (console_unlock+0x3d4/0x5bc) [ 2.155429] [<c03839b8>] (console_unlock) from [<c0383e28>] (vprintk_emit+0x288/0x510) [ 2.155434] [<c0383e28>] (vprintk_emit) from [<c03841d8>] (vprintk_default+0x20/0x28) [ 2.155438] [<c03841d8>] (vprintk_default) from [<c03caec8>] (printk+0x2c/0x3c) [ 2.155445] [<c03caec8>] (printk) from [<c09c281c>] (cpufreq_online+0x658/0x6b8) [ 2.155451] [<c09c281c>] (cpufreq_online) from [<c078c470>] (subsys_interface_register+0x90/0xcc) [ 2.155458] [<c078c470>] (subsys_interface_register) from [<c09c12d8>] (cpufreq_register_driver+0x150/0x1a0) [ 2.155464] [<c09c12d8>] (cpufreq_register_driver) from [<c09c4dcc>] (dt_cpufreq_probe+0x70/0xe8) [ 2.155472] [<c09c4dcc>] (dt_cpufreq_probe) from [<c078f514>] (platform_drv_probe+0x50/0xb0) [ 2.155477] [<c078f514>] (platform_drv_probe) from [<c078dd28>] (driver_probe_device+0x208/0x2b4) [ 2.155482] [<c078dd28>] (driver_probe_device) from [<c078c148>] (bus_for_each_drv+0x60/0x94) [ 2.155486] [<c078c148>] (bus_for_each_drv) from [<c078da40>] (__device_attach+0xb0/0x114) [ 2.155490] [<c078da40>] (__device_attach) from [<c078cf24>] (bus_probe_device+0x84/0x8c) [ 2.155495] [<c078cf24>] (bus_probe_device) from [<c078d3b0>] (deferred_probe_work_func+0x68/0x94) [ 2.155501] [<c078d3b0>] (deferred_probe_work_func) from [<c035761c>] (process_one_work+0x1ec/0x414) [ 2.155507] [<c035761c>] (process_one_work) from [<c035828c>] (worker_thread+0x38/0x594) [ 2.155513] [<c035828c>] (worker_thread) from [<c035d050>] (kthread+0xdc/0xf4) [ 2.155520] [<c035d050>] (kthread) from [<c0307d78>] (ret_from_fork+0x14/0x3c) [ 3.362010] ---[ end Kernel panic - not syncing: Fatal exception in interrupt [PYBOOT] [omap5uevm 00:48]: got exception: panic ~$off [PYBOOT] [omap5uevm 00:49]: Done. ======================================================================== Board pi-arm-exynos_defconfig failure log: ------------------------------------------------- [ 2.759060] usb 1-1: New USB device found, idVendor=2232, idProduct=1056 [ 2.764305] usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.771448] dwmmc_exynos 12210000.mmc: 1 slots initialized [ 2.777505] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations [ 2.777583] exynos-drm exynos-drm: bound 14400000.fimd (ops fimd_component_ops) [ 2.777665] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops) [ 2.800294] usb 1-1: Product: WebCam SC-10HDM13631N [ 2.805132] usb 1-1: Manufacturer: Generic [ 2.809188] usb 1-1: SerialNumber: 200901010001 [ 2.840754] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 2.853194] mmc2: new high speed SDIO card at address 0001 [ 2.885660] exynos-drm exynos-drm: bound 145b0000.dp-controller (ops exynos_dp_ops) [ 2.892010] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_component_ops) [ 2.899134] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.905725] [drm] No driver support for vblank timestamp query. [ 2.912485] exynos-dp 145b0000.dp-controller: EDID data does not include any extensions. [ 2.933984] exynos-dp 145b0000.dp-controller: Link Training Clock Recovery success [ 2.935723] exynos-dp 145b0000.dp-controller: Link Training success! [ 2.940336] exynos-dp 145b0000.dp-controller: Timeout of video streamclk ok [ 2.940339] exynos-dp 145b0000.dp-controller: unable to config video [ 3.025156] Console: switching to colour frame buffer device 274x77 [ 3.117092] exynos-drm exynos-drm: fb0: frame buffer device [ 3.135127] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 3.140167] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 3.147683] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 3.170204] vdd_1v2_2: disabling [ 3.172107] TPS65090_RAILSDCDC3: disabling [ 3.176060] TPS65090_RAILSLDO1: disabling [ 3.180019] TPS65090_RAILSLDO2: disabling [ 3.184544] ALSA device list: [ 3.186978] #0: Peach-Pi-I2S-MAX98091 [ 3.191606] Waiting for root device /dev/mmcblk0p1... [ 28.185139] random: nonblocking pool is initialized [PYBOOT] [pi 01:46]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 01:47]: got exception: timeout ~$off [PYBOOT] [pi 01:49]: Done. ======================================================================== Board pi-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.529429] usbhid: USB HID core driver [ 1.533326] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539678] isl29018 7-0044: Failed to read 1: -6 [ 1.544262] isl29018 7-0044: regmap initialization fails: -6 [ 1.555149] NET: Registered protocol family 10 [ 1.559581] sit: IPv6 over IPv4 tunneling driver [ 1.563153] NET: Registered protocol family 17 [ 1.567162] can: controller area network core (rev 20120528 abi 9) [ 1.573353] NET: Registered protocol family 29 [ 1.577739] can: raw protocol (rev 20120528) [ 1.581988] can: broadcast manager protocol (rev 20120528 t) [ 1.587630] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593356] Key type dns_resolver registered [ 1.597676] ThumbEE CPU extension supported. [ 1.601598] Registering SWP/SWPB emulation handler [ 1.611466] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.616942] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623310] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628685] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638079] mmc0: mmc_select_hs200 failed, error 3 [ 1.642726] mmc0: error 3 whilst initialising MMC card [ 1.649563] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.659310] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.664917] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671150] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676529] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686208] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708462] Waiting for root device /dev/mmcblk0p1... [ 2.583131] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597246] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602707] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609080] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614464] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [PYBOOT] [pi 02:11]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 02:12]: got exception: timeout ~$off [PYBOOT] [pi 02:13]: Done. ======================================================================== Board pi-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.529389] usbhid: USB HID core driver [ 1.533285] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539640] isl29018 7-0044: Failed to read 1: -6 [ 1.544223] isl29018 7-0044: regmap initialization fails: -6 [ 1.555112] NET: Registered protocol family 10 [ 1.559551] sit: IPv6 over IPv4 tunneling driver [ 1.563122] NET: Registered protocol family 17 [ 1.567131] can: controller area network core (rev 20120528 abi 9) [ 1.573322] NET: Registered protocol family 29 [ 1.577709] can: raw protocol (rev 20120528) [ 1.581958] can: broadcast manager protocol (rev 20120528 t) [ 1.587600] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593317] Key type dns_resolver registered [ 1.597652] ThumbEE CPU extension supported. [ 1.601569] Registering SWP/SWPB emulation handler [ 1.611459] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.616937] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623306] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628681] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638076] mmc0: mmc_select_hs200 failed, error 3 [ 1.642721] mmc0: error 3 whilst initialising MMC card [ 1.649555] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.659333] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.664936] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671164] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676542] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686222] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708466] Waiting for root device /dev/mmcblk0p1... [ 2.583128] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597243] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602703] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609077] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614460] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [PYBOOT] [pi 02:01]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 02:02]: got exception: timeout ~$off [PYBOOT] [pi 02:03]: Done. ======================================================================== Board pit-arm-exynos_defconfig failure log: ------------------------------------------------- [ 2.693814] NET: Registered protocol family 15 [ 2.698287] Key type dns_resolver registered [ 2.702842] Registering SWP/SWPB emulation handler [ 2.707216] big.LITTLE switcher initializing [ 2.711457] bL_switcher_halve_cpus: no CPU pairing possible [ 2.717007] big.LITTLE switcher initialization failed [ 2.734407] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling [ 2.738786] s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc1 [ 2.745369] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.751652] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.758016] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.763367] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 2.773195] dwmmc_exynos 12210000.mmc: allocated mmc-pwrseq [ 2.779168] asix 3-1:1.0 eth0: register 'asix' at usb-xhci-hcd.3.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:43:ee:23 [ 2.790999] usb 1-1: New USB device found, idVendor=2232, idProduct=1056 [ 2.796243] usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.803357] usb 1-1: Product: WebCam SC-10HDM13631N [ 2.808258] dwmmc_exynos 12210000.mmc: 1 slots initialized [ 2.808883] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 2.820435] usb 1-1: Manufacturer: Generic [ 2.824450] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 2.840208] usb 1-1: SerialNumber: 200901010001 [ 2.849502] vdd_1v2_2: disabling [ 2.849661] TPS65090_RAILSDCDC3: disabling [ 2.855901] lcd_vdd: disabling [ 2.859987] TPS65090_RAILSLDO1: disabling [ 2.863769] TPS65090_RAILSLDO2: disabling [ 2.868286] ALSA device list: [ 2.871637] #0: Peach-Pit-I2S-MAX98090 [ 2.877646] Waiting for root device /dev/mmcblk0p1... [ 2.901314] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 2.913811] mmc2: new high speed SDIO card at address 0001 [ 42.780137] random: nonblocking pool is initialized [PYBOOT] [pit 01:46]: Timed out waiting for "<type 'str'>": [PYBOOT] [pit 01:47]: got exception: timeout ~$off [PYBOOT] [pit 01:48]: Done. ======================================================================== Board pit-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.529537] usbhid: USB HID core driver [ 1.533435] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539787] isl29018 7-0044: Failed to read 1: -6 [ 1.544372] isl29018 7-0044: regmap initialization fails: -6 [ 1.555303] NET: Registered protocol family 10 [ 1.559728] sit: IPv6 over IPv4 tunneling driver [ 1.563310] NET: Registered protocol family 17 [ 1.567314] can: controller area network core (rev 20120528 abi 9) [ 1.573503] NET: Registered protocol family 29 [ 1.577892] can: raw protocol (rev 20120528) [ 1.582141] can: broadcast manager protocol (rev 20120528 t) [ 1.587783] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593505] Key type dns_resolver registered [ 1.597830] ThumbEE CPU extension supported. [ 1.601752] Registering SWP/SWPB emulation handler [ 1.611650] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617130] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623497] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628872] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638276] mmc0: mmc_select_hs200 failed, error 3 [ 1.642913] mmc0: error 3 whilst initialising MMC card [ 1.649750] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.659551] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.665160] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671390] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676768] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686462] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708005] Waiting for root device /dev/mmcblk0p1... [ 2.583238] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:43:ee:23 [ 2.597390] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602850] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609224] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614608] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [PYBOOT] [pit 02:00]: Timed out waiting for "<type 'str'>": [PYBOOT] [pit 02:01]: got exception: timeout ~$off [PYBOOT] [pit 02:02]: Done. ======================================================================== Board pit-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.529720] usbhid: USB HID core driver [ 1.533620] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539972] isl29018 7-0044: Failed to read 1: -6 [ 1.544555] isl29018 7-0044: regmap initialization fails: -6 [ 1.555508] NET: Registered protocol family 10 [ 1.559941] sit: IPv6 over IPv4 tunneling driver [ 1.563521] NET: Registered protocol family 17 [ 1.567523] can: controller area network core (rev 20120528 abi 9) [ 1.573713] NET: Registered protocol family 29 [ 1.578101] can: raw protocol (rev 20120528) [ 1.582350] can: broadcast manager protocol (rev 20120528 t) [ 1.587992] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593718] Key type dns_resolver registered [ 1.598042] ThumbEE CPU extension supported. [ 1.601961] Registering SWP/SWPB emulation handler [ 1.611901] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617384] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623750] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.629125] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638529] mmc0: mmc_select_hs200 failed, error 3 [ 1.643166] mmc0: error 3 whilst initialising MMC card [ 1.650005] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.659817] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.665423] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671652] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.677029] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686723] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708356] Waiting for root device /dev/mmcblk0p1... [ 2.583428] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:43:ee:23 [ 2.597591] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603052] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609425] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614808] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [PYBOOT] [pit 02:00]: Timed out waiting for "<type 'str'>": [PYBOOT] [pit 02:01]: got exception: timeout ~$off [PYBOOT] [pit 02:02]: Done.

8 years

next build: 15 warnings 2 failures (next/next-20160603)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: 64289ca Add linux-next specific files for 20160603 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20160603/ Runtime: 8m 46s Passed: 118 Failed: 2 Warnings: 15 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: arm64.allmodconfig powerpc.pasemi_defconfig ------------------------------------------------------------------------------- Errors: arm64.allmodconfig: /work/build/batch/samples/seccomp/bpf-fancy.c:13:27: fatal error: linux/seccomp.h: No such file or directory /work/build/batch/samples/seccomp/bpf-helper.h:20:50: fatal error: linux/seccomp.h: No such file or directory /work/build/batch/samples/seccomp/dropper.c:20:27: fatal error: linux/seccomp.h: No such file or directory /work/build/batch/samples/seccomp/bpf-direct.c:21:27: fatal error: linux/seccomp.h: No such file or directory powerpc.pasemi_defconfig: /work/build/batch/arch/powerpc/kernel/ptrace.c:379:104: error: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Werror=array-bounds] /work/build/batch/arch/powerpc/kernel/ptrace.c:407:104: error: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Werror=array-bounds] Warnings: 1 drivers/block/floppy.c:1777:44: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:1779:44: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:4487:45: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:4495:45: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:810:44: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:825:43: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:826:43: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/infiniband/core/cma.c:1253:12: warning: 'src_addr_storage.sin_addr.s_addr' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 drivers/phy/phy-exynos-mipi-video.c:238:13: warning: 'val' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 drivers/staging/iio/adc/ad7606_spi.c:24:18: warning: 'data' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 include/sound/control.h:219:9: warning: 'master_vol' may be used uninitialized in this function [-Wmaybe-uninitialized] 2 drivers/dma-buf/sync_file.c:85:60: warning: format '%d' expects argument of type 'int', but argument 6 has type 'u64 {aka long long unsigned int}' [-Wformat=] 2 drivers/net/wireless/intel/iwlegacy/3945.c:1022:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] Section mismatches:

8 years

next boot: 43 passed 11 failed (next/next-20160603)

by Olof's autobooter

Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20160603/ Failed boards: arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver arm-tegra_defconfig : FAILED 1:48.20 beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:47.94 omap5uevm arm-multi_v7_defconfig : FAILED 0:46.78 omap5uevm arm-multi_lpae_defconfig : FAILED 0:46.65 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-exynos_defconfig : FAILED 1:48.47 pi arm-multi_v7_defconfig : FAILED 2:13.45 pi arm-multi_lpae_defconfig : FAILED 2:00.52 pi multi_v7_nosmp_defconfig : NO BUILD pit arm-exynos_defconfig : FAILED 1:50.02 pit arm-multi_v7_defconfig : FAILED 1:56.24 pit arm-multi_lpae_defconfig : FAILED 2:07.48 pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard arm-imx_v6_v7_defconfig : FAILED 2:57.00 wandboard multi_v7_nosmp_defconfig : NO BUILD Successful boards: apc arm-vt8500_v6_v7_defconfig : passed 1:36.56 arndale arm-exynos_defconfig : passed 1:28.66 arndale arm-multi_v7_defconfig : passed 1:39.58 arndale arm-multi_lpae_defconfig : passed 1:37.42 bbb arm-omap2plus_defconfig : passed 1:39.92 bbb arm-multi_v7_defconfig : passed 1:23.58 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:55.49 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:54.35 beagleboard-x15 arm-multi_lpae_defconfig : warnings 1:01.69 capri arm-bcm_defconfig : passed 0:50.47 capri arm-multi_v7_defconfig : passed 1:05.40 chitra powerpc-ppc64_defconfig : passed 2:17.69 colombus arm-sunxi_defconfig : passed 2:33.36 colombus arm-multi_v7_defconfig : passed 2:42.10 colombus arm-multi_lpae_defconfig : passed 2:36.27 cosmic arm-imx_v6_v7_defconfig : passed 3:20.35 cosmic arm-multi_v7_defconfig : passed 3:07.79 cubie arm-sunxi_defconfig : passed 0:49.50 cubie arm-multi_v7_defconfig : passed 0:48.88 cubie2 arm-sunxi_defconfig : passed 0:55.68 cubie2 arm-multi_v7_defconfig : passed 1:00.36 cubie2 arm-multi_lpae_defconfig : passed 0:55.42 cubox arm-multi_v7_defconfig : passed 1:13.02 cubox arm-mvebu_v7_defconfig : passed 1:11.79 dalmore arm-tegra_defconfig : warnings 1:27.03 dalmore arm-multi_v7_defconfig : warnings 1:25.23 dalmore arm-multi_lpae_defconfig : warnings 1:34.07 jetsontk1 arm-tegra_defconfig : warnings 0:50.49 jetsontk1 arm-multi_v7_defconfig : warnings 0:47.94 jetsontk1 arm-multi_lpae_defconfig : warnings 0:49.81 omap5uevm arm-omap2plus_defconfig : passed 1:05.36 parallella arm-multi_v7_defconfig : passed 2:49.28 seaboard arm-tegra_defconfig : warnings 1:01.15 seaboard arm-multi_v7_defconfig : warnings 1:00.60 seattle arm64-defconfig : passed 2:31.93 snow arm-exynos_defconfig : passed 2:09.35 snow arm-multi_v7_defconfig : passed 2:02.97 snow arm-multi_lpae_defconfig : passed 2:01.14 snowball arm-u8500_defconfig : passed 1:44.85 snowball arm-multi_v7_defconfig : passed 2:22.62 trimslice arm-tegra_defconfig : warnings 1:33.93 trimslice arm-multi_v7_defconfig : warnings 1:47.14 wandboard arm-multi_v7_defconfig : passed 1:17.03 Offline boards: beaver arm-multi_v7_defconfig : OFFLINE 2:47.44 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:19.27 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:21.46 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:30.50 hummingboard arm-multi_v7_defconfig : OFFLINE 2:12.37 pandaes arm-omap2plus_defconfig : OFFLINE 2:23.96 pandaes arm-multi_v7_defconfig : OFFLINE 2:56.60 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:58.64 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:39.22 sama5 arm-sama5_defconfig : OFFLINE 2:22.13 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:24.47 socfpga arm-socfpga_defconfig : OFFLINE 2:44.05 socfpga arm-multi_v7_defconfig : OFFLINE 2:11.64 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-arm-tegra_defconfig failure log: ------------------------------------------------- [ 6.294216] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 6.301256] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.306864] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.314378] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.324378] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.336987] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.343628] [drm] No driver support for vblank timestamp query. [ 6.349631] drm drm: No connectors reported connected with modes [ 6.355658] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.381282] Console: switching to colour frame buffer device 128x48 [ 6.393098] drm drm: fb0: frame buffer device [ 6.420808] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.430096] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.436574] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.442005] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.449972] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.470808] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.478428] hub 1-0:1.0: USB hub found [ 6.482226] hub 1-0:1.0: 1 port detected [ 6.487048] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.492493] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.500370] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.520802] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.528290] hub 2-0:1.0: USB hub found [ 6.532075] hub 2-0:1.0: 1 port detected [ 6.540240] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.558283] vdd_sata,avdd_plle: disabling [ 6.562787] usb1_vbus: disabling [ 6.566194] ALSA device list: [ 6.569151] #0: NVIDIA Tegra Beaver [ 6.573395] Waiting for root device /dev/mmcblk0p1... [ 6.850806] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 7.836159] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:45]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:46]: got exception: timeout ~$off [PYBOOT] [beaver 01:47]: Done. ======================================================================== Board odroidu3-arm-exynos_defconfig failure log: ------------------------------------------------- [ 1.762723] usbhid: USB HID core driver [ 1.771087] NET: Registered protocol family 10 [ 1.771706] sit: IPv6 over IPv4 tunneling driver [ 1.776679] NET: Registered protocol family 17 [ 1.779975] NET: Registered protocol family 15 [ 1.784464] Key type dns_resolver registered [ 1.788777] Registering SWP/SWPB emulation handler [ 1.796736] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.801346] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.808729] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.815883] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.822471] [drm] No driver support for vblank timestamp query. [ 1.828386] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.834725] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.839940] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.851678] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.856231] mmc1: new high speed MMC card at address 0001 [ 1.861848] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.870985] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.872139] max98090 1-0010: MAX98090 REVID=0x43 [ 1.876877] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.878449] max98090 1-0010: use default 2.8v micbias [ 1.887671] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.894377] mmcblk1: p1 p2 [ 1.895767] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.905559] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.942291] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.964854] VDD10_HDMI_1.0V: disabling [ 1.965816] vdd_g3d: disabling [ 1.966656] BUCK8_P3V3: disabling [ 1.970679] ALSA device list: [ 1.972282] #0: Odroid-U3 [ 1.976127] Waiting for root device /dev/mmcblk0p2... [PYBOOT] [odroidu3 01:44]: Timed out waiting for "<type 'str'>": [PYBOOT] [odroidu3 01:45]: got exception: timeout ~$off [PYBOOT] [odroidu3 01:47]: Done. ======================================================================== Board omap5uevm-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.164576] [<c030c4a0>] (__dabt_svc) from [<c03631d0>] (try_to_wake_up+0x158/0x2bc) [ 2.164581] [<c03631d0>] (try_to_wake_up) from [<c0384c68>] (handle_irq_event_percpu+0x74/0x14c) [ 2.164586] [<c0384c68>] (handle_irq_event_percpu) from [<c0384d84>] (handle_irq_event+0x44/0x68) [ 2.164591] [<c0384d84>] (handle_irq_event) from [<c0387fb8>] (handle_fasteoi_irq+0xb4/0x194) [ 2.164597] [<c0387fb8>] (handle_fasteoi_irq) from [<c03842e4>] (generic_handle_irq+0x24/0x34) [ 2.164601] [<c03842e4>] (generic_handle_irq) from [<c0384594>] (__handle_domain_irq+0x5c/0xb4) [ 2.164605] [<c0384594>] (__handle_domain_irq) from [<c03017a8>] (gic_handle_irq+0x54/0x98) [ 2.164609] [<c03017a8>] (gic_handle_irq) from [<c030c514>] (__irq_svc+0x54/0x70) [ 2.164611] Exception stack(0xc1301f50 to 0xc1301f98) [ 2.164613] 1f40: 00000001 00000000 ea000013 f0880000 [ 2.164617] 1f60: c1300000 c13024a4 00000000 00000000 c1214580 c1302508 c140e9a8 c1302510 [ 2.164621] 1f80: 60000013 c1301fa0 c032ae74 c0308780 a0000013 ffffffff [ 2.164626] [<c030c514>] (__irq_svc) from [<c0308780>] (arch_cpu_idle+0x20/0x3c) [ 2.164632] [<c0308780>] (arch_cpu_idle) from [<c0378218>] (cpu_startup_entry+0x1bc/0x218) [ 2.164639] [<c0378218>] (cpu_startup_entry) from [<c1100c50>] (start_kernel+0x374/0x380) [ 2.164644] [<c1100c50>] (start_kernel) from [<8020807c>] (0x8020807c) [ 2.164648] Code: 3afffff6 e8bd8070 e30f3e84 e34c3133 (e593200c) [ 2.164654] ---[ end trace 26b2883c01c93e76 ]--- [ 2.164656] Kernel panic - not syncing: Fatal exception in interrupt [ 2.164661] CPU1: stopping [ 2.164665] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 4.7.0-rc1-next-20160603 #1 [ 2.164666] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.164677] [<c031038c>] (unwind_backtrace) from [<c030b9b0>] (show_stack+0x10/0x14) [ 2.164685] [<c030b9b0>] (show_stack) from [<c05914b4>] (dump_stack+0x88/0x9c) [ 2.164691] [<c05914b4>] (dump_stack) from [<c030eb3c>] (handle_IPI+0x174/0x194) [ 2.164697] [<c030eb3c>] (handle_IPI) from [<c03017e8>] (gic_handle_irq+0x94/0x98) [ 2.164701] [<c03017e8>] (gic_handle_irq) from [<c030c514>] (__irq_svc+0x54/0x70) [ 2.164703] Exception stack(0xee099f88 to 0xee099fd0) [ 2.164707] 9f80: 00000001 00000000 ea000013 f0880000 ee098000 c13024a4 [ 2.164712] 9fa0: 00000000 00000000 c1214580 c1302508 c140e9a8 c1302510 60000013 ee099fd8 [ 2.164714] 9fc0: c032ae74 c0308780 a0000013 ffffffff [ 2.164721] [<c030c514>] (__irq_svc) from [<c0308780>] (arch_cpu_idle+0x20/0x3c) [ 2.164727] [<c0308780>] (arch_cpu_idle) from [<c0378218>] (cpu_startup_entry+0x1bc/0x218) [ 2.164731] [<c0378218>] (cpu_startup_entry) from [<80301c8c>] (0x80301c8c) [ 2.963009] ---[ end Kernel panic - not syncing: Fatal exception in interrupt [PYBOOT] [omap5uevm 00:44]: got exception: panic ~$off [PYBOOT] [omap5uevm 00:45]: Done. ======================================================================== Board omap5uevm-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.250549] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.256528] Process swapper/0 (pid: 0, stack limit = 0xc1300220) [ 2.262779] Stack: (0xc1301e80 to 0xc1302000) [ 2.267314] 1e80: c1301e94 c058f314 ffff174f c06fb884 77359400 ee60b800 00000002 00000000 [ 2.275841] 1ea0: 00000000 00000127 ee1840c0 c140e9aa c0ef5138 c0384c68 77359400 c1302510 [ 2.284366] 1ec0: 00000000 c0ef5160 00000000 ee1840c0 ee184120 00000000 00000001 ee008000 [ 2.292893] 1ee0: fa213000 c140e9a8 c1302510 c0384d84 ee1840c0 c130a9e8 00000000 c0387fb8 [ 2.301418] 1f00: c12134dc 00000000 00000000 c03842e4 c12134dc c0384594 c1302870 c13405f8 [ 2.309928] 1f20: fa21200c c1301f50 fa212000 c03017a8 c0308780 a0000013 ffffffff c1301f84 [ 2.318444] 1f40: c1214580 c1302508 c140e9a8 c030c514 00000001 00000000 ea000013 f0880000 [ 2.326965] 1f60: c1300000 c13024a4 00000000 00000000 c1214580 c1302508 c140e9a8 c1302510 [ 2.335483] 1f80: 60000013 c1301fa0 c032ae74 c0308780 a0000013 ffffffff 00000051 c030877c [ 2.344003] 1fa0: c1300000 c0378218 c1301fb4 c1301fa8 00000000 ffffffff 00000000 c1100c50 [ 2.352530] 1fc0: ffffffff ffffffff 00000000 c1100684 00000000 c11a6a30 c14105d4 c1302480 [ 2.361046] 1fe0: c11a6a2c c1307694 8020406a 412fc0f2 00000000 8020807c 00000000 00000000 [ 2.369574] [<c03631d0>] (try_to_wake_up) from [<c0384c68>] (handle_irq_event_percpu+0x74/0x14c) [ 2.378733] [<c0384c68>] (handle_irq_event_percpu) from [<c0384d84>] (handle_irq_event+0x44/0x68) [ 2.387979] [<c0384d84>] (handle_irq_event) from [<c0387fb8>] (handle_fasteoi_irq+0xb4/0x194) [ 2.396864] [<c0387fb8>] (handle_fasteoi_irq) from [<c03842e4>] (generic_handle_irq+0x24/0x34) [ 2.405843] [<c03842e4>] (generic_handle_irq) from [<c0384594>] (__handle_domain_irq+0x5c/0xb4) [ 2.414917] [<c0384594>] (__handle_domain_irq) from [<c03017a8>] (gic_handle_irq+0x54/0x98) [ 2.423625] [<c03017a8>] (gic_handle_irq) from [<c030c514>] (__irq_svc+0x54/0x70) [ 2.431415] Exception stack(0xc1301f50 to 0xc1301f98) [ 2.436666] 1f40: 00000001 00000000 ea000013 f0880000 [ 2.445185] 1f60: c1300000 c13024a4 00000000 00000000 c1214580 c1302508 c140e9a8 c1302510 [ 2.453706] 1f80: 60000013 c1301fa0 c032ae74 c0308780 a0000013 ffffffff [ 2.460601] [<c030c514>] (__irq_svc) from [<c0308780>] (arch_cpu_idle+0x20/0x3c) [ 2.468306] [<c0308780>] (arch_cpu_idle) from [<c0378218>] (cpu_startup_entry+0x1bc/0x218) [ 2.476918] [<c0378218>] (cpu_startup_entry) from [<c1100c50>] (start_kernel+0x374/0x380) [ 2.485445] [<c1100c50>] (start_kernel) from [<8020807c>] (0x8020807c) [ 2.492247] Code: e3c21d7f e3c1103f e59f2160 e5910010 (e7931002) [ 2.498596] ---[ end trace ae4b286d9aff910f ]--- [ 2.503402] Kernel panic - not syncing: Fatal exception in interrupt [ 3.486963] SMP: failed to stop secondary CPUs [ 3.491592] ---[ end Kernel panic - not syncing: Fatal exception in interrupt [PYBOOT] [omap5uevm 00:45]: got exception: panic ~$off [PYBOOT] [omap5uevm 00:46]: Done. ======================================================================== Board pi-arm-exynos_defconfig failure log: ------------------------------------------------- [ 2.741780] usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.749585] asix 3-1:1.0 eth0: register 'asix' at usb-xhci-hcd.3.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.759845] dwmmc_exynos 12210000.mmc: 1 slots initialized [ 2.766023] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations [ 2.766122] exynos-drm exynos-drm: bound 14400000.fimd (ops fimd_component_ops) [ 2.766230] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops) [ 2.789124] usb 1-1: Product: WebCam SC-10HDM13631N [ 2.793957] usb 1-1: Manufacturer: Generic [ 2.798034] usb 1-1: SerialNumber: 200901010001 [ 2.829585] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 2.842829] mmc2: new high speed SDIO card at address 0001 [ 2.875734] exynos-drm exynos-drm: bound 145b0000.dp-controller (ops exynos_dp_ops) [ 2.882125] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_component_ops) [ 2.889219] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.895808] [drm] No driver support for vblank timestamp query. [ 2.902503] exynos-dp 145b0000.dp-controller: EDID data does not include any extensions. [ 2.924574] exynos-dp 145b0000.dp-controller: Link Training Clock Recovery success [ 2.926263] exynos-dp 145b0000.dp-controller: Link Training success! [ 2.930795] exynos-dp 145b0000.dp-controller: Timeout of video streamclk ok [ 2.930799] exynos-dp 145b0000.dp-controller: unable to config video [ 3.017455] Console: switching to colour frame buffer device 274x77 [ 3.121148] exynos-drm exynos-drm: fb0: frame buffer device [ 3.140158] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 3.145918] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 3.153216] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 3.191408] vdd_1v2_2: disabling [ 3.193385] TPS65090_RAILSDCDC3: disabling [ 3.197301] TPS65090_RAILSLDO1: disabling [ 3.201268] TPS65090_RAILSLDO2: disabling [ 3.206077] ALSA device list: [ 3.208175] #0: Peach-Pi-I2S-MAX98091 [ 3.213434] Waiting for root device /dev/mmcblk0p1... [ 27.785413] random: nonblocking pool is initialized [PYBOOT] [pi 01:45]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 01:46]: got exception: timeout ~$off [PYBOOT] [pi 01:47]: Done. ======================================================================== Board pi-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.505831] usbhid: USB HID core driver [ 1.509729] isl29018 7-0044: No cache defaults, reading back from HW [ 1.516084] isl29018 7-0044: Failed to read 1: -6 [ 1.520667] isl29018 7-0044: regmap initialization fails: -6 [ 1.531571] NET: Registered protocol family 10 [ 1.535999] sit: IPv6 over IPv4 tunneling driver [ 1.539577] NET: Registered protocol family 17 [ 1.543582] can: controller area network core (rev 20120528 abi 9) [ 1.549771] NET: Registered protocol family 29 [ 1.554160] can: raw protocol (rev 20120528) [ 1.558410] can: broadcast manager protocol (rev 20120528 t) [ 1.564052] can: netlink gateway (rev 20130117) max_hops=1 [ 1.569772] Key type dns_resolver registered [ 1.574116] ThumbEE CPU extension supported. [ 1.578021] Registering SWP/SWPB emulation handler [ 1.591461] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.596942] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.603305] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.608680] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 77,64 bit host data width,64 deep fifo [ 1.618079] mmc0: mmc_select_hs200 failed, error 3 [ 1.622721] mmc0: error 3 whilst initialising MMC card [ 1.629562] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.642869] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.648467] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.654703] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.660081] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 77,64 bit host data width,64 deep fifo [ 1.669752] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.691918] Waiting for root device /dev/mmcblk0p1... [ 2.554526] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.572175] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.577635] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.584009] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.589393] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 77,64 bit host data width,64 deep fifo [PYBOOT] [pi 01:57]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 01:58]: got exception: timeout ~$off [PYBOOT] [pi 02:00]: Done. ======================================================================== Board pi-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.506351] usbhid: USB HID core driver [ 1.510248] isl29018 7-0044: No cache defaults, reading back from HW [ 1.516602] isl29018 7-0044: Failed to read 1: -6 [ 1.521186] isl29018 7-0044: regmap initialization fails: -6 [ 1.532131] NET: Registered protocol family 10 [ 1.536566] sit: IPv6 over IPv4 tunneling driver [ 1.540140] NET: Registered protocol family 17 [ 1.544145] can: controller area network core (rev 20120528 abi 9) [ 1.550334] NET: Registered protocol family 29 [ 1.554723] can: raw protocol (rev 20120528) [ 1.558973] can: broadcast manager protocol (rev 20120528 t) [ 1.564615] can: netlink gateway (rev 20130117) max_hops=1 [ 1.570342] Key type dns_resolver registered [ 1.574678] ThumbEE CPU extension supported. [ 1.578583] Registering SWP/SWPB emulation handler [ 1.592071] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.597558] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.603920] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.609295] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 77,64 bit host data width,64 deep fifo [ 1.618697] mmc0: mmc_select_hs200 failed, error 3 [ 1.623337] mmc0: error 3 whilst initialising MMC card [ 1.630183] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.643538] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.649136] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.655369] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.660748] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 77,64 bit host data width,64 deep fifo [ 1.670419] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.692707] Waiting for root device /dev/mmcblk0p1... [ 2.555024] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.572765] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.578227] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.584598] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.589982] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 77,64 bit host data width,64 deep fifo [PYBOOT] [pi 02:10]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 02:11]: got exception: timeout ~$off [PYBOOT] [pi 02:12]: Done. ======================================================================== Board pit-arm-exynos_defconfig failure log: ------------------------------------------------- [ 2.665779] NET: Registered protocol family 17 [ 2.669434] NET: Registered protocol family 15 [ 2.673942] Key type dns_resolver registered [ 2.678583] Registering SWP/SWPB emulation handler [ 2.696116] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling [ 2.700751] s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc1 [ 2.707181] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.713309] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.719664] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.725048] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 77,64 bit host data width,64 deep fifo [ 2.734533] dwmmc_exynos 12210000.mmc: allocated mmc-pwrseq [ 2.757212] asix 3-1:1.0 eth0: register 'asix' at usb-xhci-hcd.3.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:43:ee:23 [ 2.766724] usb 1-1: New USB device found, idVendor=2232, idProduct=1056 [ 2.766729] usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.766734] usb 1-1: Product: WebCam SC-10HDM13631N [ 2.766737] usb 1-1: Manufacturer: Generic [ 2.766741] usb 1-1: SerialNumber: 200901010001 [ 2.767161] dwmmc_exynos 12210000.mmc: 1 slots initialized [ 2.767876] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 2.780904] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 2.815670] vdd_1v2_2: disabling [ 2.815838] TPS65090_RAILSDCDC3: disabling [ 2.822387] lcd_vdd: disabling [ 2.825382] TPS65090_RAILSLDO1: disabling [ 2.825387] TPS65090_RAILSLDO2: disabling [ 2.825945] ALSA device list: [ 2.825948] #0: Peach-Pit-I2S-MAX98090 [ 2.858094] Waiting for root device /dev/mmcblk0p1... [ 2.863654] Power domain power-domain@10044120 disable failed [ 2.867970] Power domain power-domain@10044020 disable failed [ 2.897602] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 2.910358] mmc2: new high speed SDIO card at address 0001 [ 41.775189] random: nonblocking pool is initialized [PYBOOT] [pit 01:47]: Timed out waiting for "<type 'str'>": [PYBOOT] [pit 01:48]: got exception: timeout ~$off [PYBOOT] [pit 01:49]: Done. ======================================================================== Board pit-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.506158] usbhid: USB HID core driver [ 1.510056] isl29018 7-0044: No cache defaults, reading back from HW [ 1.516409] isl29018 7-0044: Failed to read 1: -6 [ 1.520994] isl29018 7-0044: regmap initialization fails: -6 [ 1.531956] NET: Registered protocol family 10 [ 1.536391] sit: IPv6 over IPv4 tunneling driver [ 1.539960] NET: Registered protocol family 17 [ 1.543971] can: controller area network core (rev 20120528 abi 9) [ 1.550162] NET: Registered protocol family 29 [ 1.554549] can: raw protocol (rev 20120528) [ 1.558798] can: broadcast manager protocol (rev 20120528 t) [ 1.564440] can: netlink gateway (rev 20130117) max_hops=1 [ 1.570167] Key type dns_resolver registered [ 1.574496] ThumbEE CPU extension supported. [ 1.578409] Registering SWP/SWPB emulation handler [ 1.591906] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.597388] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.603756] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.609128] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 77,64 bit host data width,64 deep fifo [ 1.618525] mmc0: mmc_select_hs200 failed, error 3 [ 1.623171] mmc0: error 3 whilst initialising MMC card [ 1.630017] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.643347] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.648951] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.655188] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.660565] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 77,64 bit host data width,64 deep fifo [ 1.670250] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.691809] Waiting for root device /dev/mmcblk0p1... [ 2.554835] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:43:ee:23 [ 2.572598] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.578060] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.584432] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.589816] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 77,64 bit host data width,64 deep fifo [PYBOOT] [pit 02:04]: Timed out waiting for "<type 'str'>": [PYBOOT] [pit 02:05]: got exception: timeout ~$off [PYBOOT] [pit 02:06]: Done. ======================================================================== Board pit-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.506123] usbhid: USB HID core driver [ 1.510021] isl29018 7-0044: No cache defaults, reading back from HW [ 1.516373] isl29018 7-0044: Failed to read 1: -6 [ 1.520958] isl29018 7-0044: regmap initialization fails: -6 [ 1.531922] NET: Registered protocol family 10 [ 1.536351] sit: IPv6 over IPv4 tunneling driver [ 1.539927] NET: Registered protocol family 17 [ 1.543935] can: controller area network core (rev 20120528 abi 9) [ 1.550128] NET: Registered protocol family 29 [ 1.554513] can: raw protocol (rev 20120528) [ 1.558763] can: broadcast manager protocol (rev 20120528 t) [ 1.564405] can: netlink gateway (rev 20130117) max_hops=1 [ 1.570134] Key type dns_resolver registered [ 1.574464] ThumbEE CPU extension supported. [ 1.578374] Registering SWP/SWPB emulation handler [ 1.591836] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.597318] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.603684] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.609059] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 77,64 bit host data width,64 deep fifo [ 1.618454] mmc0: mmc_select_hs200 failed, error 3 [ 1.623100] mmc0: error 3 whilst initialising MMC card [ 1.629950] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.643329] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.648933] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.655168] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.660547] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 77,64 bit host data width,64 deep fifo [ 1.670229] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.691770] Waiting for root device /dev/mmcblk0p1... [ 2.554805] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:43:ee:23 [ 2.572533] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.577997] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.584371] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.589755] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 77,64 bit host data width,64 deep fifo [PYBOOT] [pit 01:52]: Timed out waiting for "<type 'str'>": [PYBOOT] [pit 01:53]: got exception: timeout ~$off [PYBOOT] [pit 01:54]: Done. ======================================================================== Board wandboard-arm-imx_v6_v7_defconfig failure log: ------------------------------------------------- cannot execute "/sbin/getty" INIT: INIT: canno[ 20.090005] mmcblk0: error -110 sending status command, retrying t execute "/sbin/getty"cannot exe[ 20.098831] mmcblk0: error -110 sending status command, retrying cute "/sbin/getty" INIT: Id "3[ 20.107715] mmcblk0: error -110 sending status command, aborting " respawning too fast: disabled for 5 minutes INIT: Id "4" res[ 20.119268] mmcblk0: error -110 sending status command, retrying pawning too fast: disabled for 5 [ 20.128238] mmcblk0: error -110 sending status command, retrying minutes [ 20.137108] mmcblk0: error -110 sending status command, aborting [ 20.148158] mmcblk0: error -110 sending status command, retrying [ 20.156616] mmcblk0: error -110 sending status command, retrying [ 20.165073] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/gett[ 20.176232] mmcblk0: error -110 sending status command, retrying y" [ 20.185004] mmcblk0: error -110 sending status command, retrying [ 20.193427] mmcblk0: error -110 sending status command, aborting [ 20.204509] mmcblk0: error -110 sending status command, retrying [ 20.212944] mmcblk0: error -110 sending status command, retrying [ 20.221402] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty" INIT: Id "2" respawning too fast: disabled for 5 minutes INIT: IN[ 20.240409] mmcblk0: error -110 sending status command, retrying IT: cannot execute "/sbin/getty"I[ 20.249172] mmcblk0: error -110 sending status command, retrying d "5" respawning too fast: disabl[ 20.258062] mmcblk0: error -110 sending status command, aborting ed for 5 minutes INIT: cannot execute "/sbin/getty" INIT: Id "1" respawning too fast: disabled for 5 minutes INIT: cannot execute "/sbin/getty" INIT: Id "6" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 51.664387] random: nonblocking pool is initialized [PYBOOT] [wandboard 02:54]: Timed out waiting for "<type 'str'>": [PYBOOT] [wandboard 02:55]: got exception: timeout ~$off [PYBOOT] [wandboard 02:56]: Done.

8 years

mainline boot: 43 passed 10 failed (mainline/v4.7-rc1-247-g049ec1b)

by Olof's autobooter

Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.7-rc1-247-g049ec1b/ Failed boards: arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver arm-tegra_defconfig : FAILED 1:48.61 beaver arm-multi_v7_defconfig : FAILED 1:54.72 beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:49.51 omap5uevm arm-omap2plus_defconfig : FAILED 2:05.38 omap5uevm arm-multi_v7_defconfig : FAILED 2:06.68 omap5uevm arm-multi_lpae_defconfig : FAILED 2:13.14 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-exynos_defconfig : FAILED 0:32.72 pi arm-multi_v7_defconfig : FAILED 1:52.73 pi arm-multi_lpae_defconfig : FAILED 1:57.98 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard arm-imx_v6_v7_defconfig : FAILED 2:58.23 wandboard multi_v7_nosmp_defconfig : NO BUILD Successful boards: apc arm-vt8500_v6_v7_defconfig : passed 1:12.19 arndale arm-exynos_defconfig : passed 1:34.97 arndale arm-multi_v7_defconfig : passed 1:26.09 arndale arm-multi_lpae_defconfig : passed 1:32.70 bbb arm-omap2plus_defconfig : passed 1:44.23 bbb arm-multi_v7_defconfig : passed 1:15.15 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:51.04 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:56.32 beagleboard-x15 arm-multi_lpae_defconfig : warnings 0:52.60 capri arm-bcm_defconfig : passed 0:45.08 capri arm-multi_v7_defconfig : passed 0:59.12 chitra powerpc-ppc64_defconfig : passed 2:16.35 colombus arm-sunxi_defconfig : passed 2:27.35 colombus arm-multi_v7_defconfig : passed 2:37.26 colombus arm-multi_lpae_defconfig : passed 2:32.86 cosmic arm-imx_v6_v7_defconfig : passed 3:22.71 cosmic arm-multi_v7_defconfig : passed 2:59.52 cubie arm-sunxi_defconfig : passed 0:58.53 cubie arm-multi_v7_defconfig : passed 0:54.48 cubie2 arm-sunxi_defconfig : passed 1:01.27 cubie2 arm-multi_v7_defconfig : passed 0:55.10 cubie2 arm-multi_lpae_defconfig : passed 1:08.89 cubox arm-multi_v7_defconfig : passed 1:26.96 cubox arm-mvebu_v7_defconfig : passed 1:12.55 dalmore arm-tegra_defconfig : warnings 1:26.55 dalmore arm-multi_v7_defconfig : warnings 1:29.11 dalmore arm-multi_lpae_defconfig : warnings 1:39.43 jetsontk1 arm-tegra_defconfig : warnings 0:52.68 jetsontk1 arm-multi_lpae_defconfig : warnings 0:47.76 parallella arm-multi_v7_defconfig : passed 2:57.58 pit arm-exynos_defconfig : passed 3:04.52 pit arm-multi_v7_defconfig : passed 2:20.43 pit arm-multi_lpae_defconfig : passed 2:14.56 seaboard arm-tegra_defconfig : warnings 1:01.61 seaboard arm-multi_v7_defconfig : warnings 1:08.24 seattle arm64-defconfig : passed 2:38.75 snow arm-exynos_defconfig : passed 2:14.95 snow arm-multi_v7_defconfig : passed 2:05.44 snow arm-multi_lpae_defconfig : passed 2:01.20 snowball arm-u8500_defconfig : passed 1:53.69 snowball arm-multi_v7_defconfig : passed 3:08.06 trimslice arm-multi_v7_defconfig : warnings 2:53.57 wandboard arm-multi_v7_defconfig : passed 1:07.79 Offline boards: colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:18.49 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:22.65 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:21.18 hummingboard arm-multi_v7_defconfig : OFFLINE 2:16.24 jetsontk1 arm-multi_v7_defconfig : OFFLINE 2:15.63 pandaes arm-omap2plus_defconfig : OFFLINE 2:14.71 pandaes arm-multi_v7_defconfig : OFFLINE 2:19.61 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:50.09 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:43.70 sama5 arm-sama5_defconfig : OFFLINE 2:16.92 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:23.69 socfpga arm-socfpga_defconfig : OFFLINE 2:20.66 socfpga arm-multi_v7_defconfig : OFFLINE 2:16.20 trimslice arm-tegra_defconfig : OFFLINE 2:19.72 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.413055] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.420011] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.426531] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.433476] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.439062] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.446064] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.456062] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.467287] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.473926] [drm] No driver support for vblank timestamp query. [ 3.479867] drm drm: No connectors reported connected with modes [ 3.485874] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.511072] Console: switching to colour frame buffer device 128x48 [ 3.523046] drm drm: fb0: frame buffer device [ 3.538352] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.549195] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.555660] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.561068] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.568892] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.583361] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.590122] hub 1-0:1.0: USB hub found [ 3.593895] hub 1-0:1.0: 1 port detected [ 3.598833] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.604243] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.611980] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.623354] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.630010] hub 2-0:1.0: USB hub found [ 3.633778] hub 2-0:1.0: 1 port detected [ 3.642023] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.655698] vdd_sata,avdd_plle: disabling [ 3.660099] usb1_vbus: disabling [ 3.664186] Waiting for root device /dev/mmcblk0p1... [ 3.943360] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.881956] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:52]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:53]: got exception: timeout ~$off [PYBOOT] [beaver 01:54]: Done. ======================================================================== Board beaver-arm-tegra_defconfig failure log: ------------------------------------------------- [ 6.384204] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 6.391251] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.396853] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.404360] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.414361] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.426955] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.433575] [drm] No driver support for vblank timestamp query. [ 6.439581] drm drm: No connectors reported connected with modes [ 6.445592] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.471441] Console: switching to colour frame buffer device 128x48 [ 6.483248] drm drm: fb0: frame buffer device [ 6.510773] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.520053] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.526529] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.531961] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.539937] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.560780] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.568379] hub 1-0:1.0: USB hub found [ 6.572158] hub 1-0:1.0: 1 port detected [ 6.576954] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.582379] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.590250] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.610776] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.618250] hub 2-0:1.0: USB hub found [ 6.622025] hub 2-0:1.0: 1 port detected [ 6.630775] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.649003] vdd_sata,avdd_plle: disabling [ 6.653801] usb1_vbus: disabling [ 6.657208] ALSA device list: [ 6.660164] #0: NVIDIA Tegra Beaver [ 6.664404] Waiting for root device /dev/mmcblk0p1... [ 6.940781] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 7.926270] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:46]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:47]: got exception: timeout ~$off [PYBOOT] [beaver 01:48]: Done. ======================================================================== Board odroidu3-arm-exynos_defconfig failure log: ------------------------------------------------- [ 1.786746] sit: IPv6 over IPv4 tunneling driver [ 1.787212] NET: Registered protocol family 17 [ 1.790151] NET: Registered protocol family 15 [ 1.794628] Key type dns_resolver registered [ 1.798974] Registering SWP/SWPB emulation handler [ 1.806926] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.811553] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.818926] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.826095] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.832651] [drm] No driver support for vblank timestamp query. [ 1.838569] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.844911] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.849960] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.857375] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.864522] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.873316] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.883115] mmc1: new DDR MMC card at address 0001 [ 1.887077] max98090 1-0010: MAX98090 REVID=0x43 [ 1.889351] max98090 1-0010: use default 2.8v micbias [ 1.900978] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.903164] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.903415] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.908674] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.908909] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.919896] mmcblk1: p1 p2 [ 1.931706] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.968341] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.988310] VDD10_HDMI_1.0V: disabling [ 1.989024] vdd_g3d: disabling [ 1.990092] BUCK8_2.8V: disabling [ 1.994113] ALSA device list: [ 1.995701] #0: Odroid-U3 [ 1.999537] Waiting for root device /dev/mmcblk0p2... [PYBOOT] [odroidu3 01:46]: Timed out waiting for "<type 'str'>": [PYBOOT] [odroidu3 01:47]: got exception: timeout ~$off [PYBOOT] [odroidu3 01:49]: Done. ======================================================================== Board omap5uevm-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.947529] mmc0: new high speed MMC card at address 0001 [ 1.953469] smps9: Bringing 0uV into 2100000-2100000uV [ 1.959004] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.963968] smsc95xx v1.0.4 [ 1.967001] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.973574] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.981823] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.988338] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.996322] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.007413] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.015553] ldo9: bypassed regulator has no supply! [ 2.020680] ldo9: failed to get the current voltage(-517) [ 2.026355] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.030944] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, fa:05:d5:1a:c6:d0 [ 2.053390] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.079192] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.085593] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.112115] smps9: Bringing 0uV into 2100000-2100000uV [ 2.130794] ldo9: bypassed regulator has no supply! [ 2.135907] ldo9: failed to get the current voltage(-517) [ 2.141580] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.156141] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:02:29 UTC (946684949) [ 2.171800] pbias_mmc_omap5: disabling [ 2.175743] vmmcsdio_fixed: disabling [ 2.180277] Waiting for root device /dev/mmcblk1p2... [ 2.258445] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.394358] hub 1-2:1.0: USB hub found [ 2.398374] hub 1-2:1.0: 3 ports detected [ 2.404247] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.432229] smps9: Bringing 0uV into 2100000-2100000uV [ 2.450861] ldo9: bypassed regulator has no supply! [ 2.455980] ldo9: failed to get the current voltage(-517) [ 2.461645] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [PYBOOT] [omap5uevm 02:10]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 02:11]: got exception: timeout ~$off [PYBOOT] [omap5uevm 02:12]: Done. ======================================================================== Board omap5uevm-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.935904] mmc0: new high speed MMC card at address 0001 [ 1.941746] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.946701] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.953363] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.959969] smsc95xx v1.0.4 [ 1.966247] smps9: Bringing 0uV into 2100000-2100000uV [ 1.974372] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.980911] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.988924] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.000080] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.008257] ldo9: bypassed regulator has no supply! [ 2.013374] ldo9: failed to get the current voltage(-517) [ 2.015699] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, fa:e0:cf:00:27:de [ 2.030721] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.046072] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.071968] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.078351] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.105051] smps9: Bringing 0uV into 2100000-2100000uV [ 2.124012] ldo9: bypassed regulator has no supply! [ 2.129132] ldo9: failed to get the current voltage(-517) [ 2.134796] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.149398] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.165072] pbias_mmc_omap5: disabling [ 2.169036] vmmcsdio_fixed: disabling [ 2.173576] Waiting for root device /dev/mmcblk1p2... [ 2.256192] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.391983] hub 1-2:1.0: USB hub found [ 2.396000] hub 1-2:1.0: 3 ports detected [ 2.401944] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.430083] smps9: Bringing 0uV into 2100000-2100000uV [ 2.449043] ldo9: bypassed regulator has no supply! [ 2.454160] ldo9: failed to get the current voltage(-517) [ 2.459828] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off [PYBOOT] [omap5uevm 02:05]: Done. ======================================================================== Board omap5uevm-arm-omap2plus_defconfig failure log: ------------------------------------------------- [ 3.905080] ldo9: bypassed regulator has no supply! [ 3.910215] ldo9: failed to get the current voltage(-517) [ 3.915877] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 3.938810] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 3.946378] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 3.952960] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.959272] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.966116] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 3.975709] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 3.985207] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 3.992260] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 3.998385] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.004681] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.011545] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.021129] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.030621] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.037641] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.078548] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.084842] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.091705] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.101294] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.110794] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.117829] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.138262] smps9: Bringing 0uV into 2100000-2100000uV [ 4.166641] ldo9: bypassed regulator has no supply! [ 4.171771] ldo9: failed to get the current voltage(-517) [ 4.177432] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.197541] hctosys: unable to open rtc device (rtc0) [ 4.202854] sr_init: No PMIC hook to init smartreflex [ 4.208353] sr_init: platform driver register failed for SR [ 4.235873] pbias_mmc_omap5: disabling [ 4.239837] vmmcsdio_fixed: disabling [ 4.245986] Waiting for root device /dev/mmcblk1p2... [PYBOOT] [omap5uevm 02:02]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 02:03]: got exception: timeout ~$off [PYBOOT] [omap5uevm 02:04]: Done. ======================================================================== Board pi-arm-exynos_defconfig failure log: ------------------------------------------------- [ 3.142095] exynos-drm exynos-drm: fb0: frame buffer device [ 3.160124] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 3.165159] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 3.172600] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 3.194951] vdd_1v2_2: disabling [ 3.196883] TPS65090_RAILSDCDC3: disabling [ 3.200807] TPS65090_RAILSLDO1: disabling [ 3.204769] TPS65090_RAILSLDO2: disabling [ 3.209292] ALSA device list: [ 3.211728] #0: Peach-Pi-I2S-MAX98091 [ 3.216856] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.232502] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.239182] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.248315] devtmpfs: mounted [ 3.250379] Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) [PYBOOT] [pi 00:29]: kernel: finished booting, starting userspace. [ 3.260452] Unhandled fault: imprecise external abort (0x1406) at 0x00000000 [ 3.266013] pgd = edbc8000 [ 3.268703] [00000000] *pgd=fb82c835 [ 3.280180] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 3.280180] [ 3.287825] CPU: 0 PID: 1 Comm: init Not tainted 4.7.0-rc1-00247-g049ec1b #1 [ 3.294849] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 3.300943] [<c010dfec>] (unwind_backtrace) from [<c010ad18>] (show_stack+0x10/0x14) [ 3.308648] [<c010ad18>] (show_stack) from [<c03264b8>] (dump_stack+0x78/0x8c) [ 3.315850] [<c03264b8>] (dump_stack) from [<c01966c0>] (panic+0xd8/0x250) [ 3.322703] [<c01966c0>] (panic) from [<c011e6a0>] (do_exit+0xa10/0xa34) [ 3.329379] [<c011e6a0>] (do_exit) from [<c011f27c>] (do_group_exit+0x3c/0xbc) [ 3.336581] [<c011f27c>] (do_group_exit) from [<c012875c>] (get_signal+0x220/0x5a4) [ 3.344213] [<c012875c>] (get_signal) from [<c010a460>] (do_signal+0xc4/0x418) [ 3.351414] [<c010a460>] (do_signal) from [<c010a958>] (do_work_pending+0x94/0xa4) [ 3.358961] [<c010a958>] (do_work_pending) from [<c0107714>] (slow_work_pending+0xc/0x20) [ 3.367127] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 3.367127] [PYBOOT] [pi 00:30]: got exception: panic ~$off [PYBOOT] [pi 00:31]: Done. ======================================================================== Board pi-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.539058] isl29018 7-0044: No cache defaults, reading back from HW [ 1.545413] isl29018 7-0044: Failed to read 1: -6 [ 1.549998] isl29018 7-0044: regmap initialization fails: -6 [ 1.560930] NET: Registered protocol family 10 [ 1.565371] sit: IPv6 over IPv4 tunneling driver [ 1.568948] NET: Registered protocol family 17 [ 1.572957] can: controller area network core (rev 20120528 abi 9) [ 1.579147] NET: Registered protocol family 29 [ 1.583534] can: raw protocol (rev 20120528) [ 1.587784] can: broadcast manager protocol (rev 20120528 t) [ 1.593426] can: netlink gateway (rev 20130117) max_hops=1 [ 1.599148] Key type dns_resolver registered [ 1.603478] ThumbEE CPU extension supported. [ 1.607395] Registering SWP/SWPB emulation handler [ 1.617349] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622825] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.629192] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.634567] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.644659] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.655053] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660503] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.670688] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.676869] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.682246] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.691959] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.714304] Waiting for root device /dev/mmcblk0p1... [ 1.718189] mmc0: tuning execution failed: -5 [ 1.722243] mmc0: error -5 whilst initialising MMC card [ 2.583850] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.598058] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603515] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609888] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.615272] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [PYBOOT] [pi 01:55]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 01:56]: got exception: timeout ~$off [PYBOOT] [pi 01:57]: Done. ======================================================================== Board pi-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.539061] isl29018 7-0044: No cache defaults, reading back from HW [ 1.545413] isl29018 7-0044: Failed to read 1: -6 [ 1.549997] isl29018 7-0044: regmap initialization fails: -6 [ 1.560934] NET: Registered protocol family 10 [ 1.565371] sit: IPv6 over IPv4 tunneling driver [ 1.568950] NET: Registered protocol family 17 [ 1.572957] can: controller area network core (rev 20120528 abi 9) [ 1.579148] NET: Registered protocol family 29 [ 1.583535] can: raw protocol (rev 20120528) [ 1.587784] can: broadcast manager protocol (rev 20120528 t) [ 1.593427] can: netlink gateway (rev 20130117) max_hops=1 [ 1.599154] Key type dns_resolver registered [ 1.603485] ThumbEE CPU extension supported. [ 1.607395] Registering SWP/SWPB emulation handler [ 1.617362] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622844] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.629210] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.634584] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.644679] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.655087] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660539] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.670723] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.676904] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.682281] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.691991] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.714342] Waiting for root device /dev/mmcblk0p1... [ 1.718220] mmc0: tuning execution failed: -5 [ 1.722278] mmc0: error -5 whilst initialising MMC card [ 2.583830] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.598025] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603489] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609862] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.615247] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [PYBOOT] [pi 01:50]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 01:51]: got exception: timeout ~$off [PYBOOT] [pi 01:52]: Done. ======================================================================== Board wandboard-arm-imx_v6_v7_defconfig failure log: ------------------------------------------------- [ 20.004421] mmcblk0: error -110 sending status command, aborting [ 20.015555] mmcblk0: error -110 sending status command, retrying [ 20.023971] mmcblk0: error -110 sending status command, retrying [ 20.032427] mmcblk0: error -110 sending status command, aborting [ 20.043542] mmcblk0: error -110 sending status command, retrying [ 20.052004] mmcblk0: error -110 sending status command, retrying [ 20.060461] mmcblk0: error -110 sending status command, aborting [ 20.071494] mmcblk0: error -110 sending status command, retrying [ 20.079940] mmcblk0: error -110 sending status command, retrying [ 20.088400] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty"ca[ 20.102560] mmcblk0: error -110 sending status command, retrying nnot execute "/sbin/getty" [ 20.111426] mmcblk0: error -110 sending status command, retrying INIT: Id "2" respawning too fast:[ 20.120325] mmcblk0: error -110 sending status command, aborting disabled for 5 minutes INIT: Id "6" respawning too fast: disa[ 20.131851] mmcblk0: error -110 sending status command, retrying bled for 5 minutes [ 20.140878] mmcblk0: error -110 sending status command, retrying [ 20.149332] mmcblk0: error -110 sending status command, aborting INIT: INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty"cannot execute "/sbin/getty" INIT: Id "1" respawning too fast: disabled for 5 minutes INIT: Id "5" respawning too fast: disabled for 5 minutes INIT: Id "S1" respawning too fast: disabled for 5 minutes [ 20.270872] mmcblk0: error -110 sending status command, retrying [ 20.279336] mmcblk0: error -110 sending status command, retrying [ 20.287804] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: Id "3" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 47.474744] random: nonblocking pool is initialized [PYBOOT] [wandboard 02:55]: Timed out waiting for "<type 'str'>": [PYBOOT] [wandboard 02:56]: got exception: timeout ~$off [PYBOOT] [wandboard 02:57]: Done.

8 years

mainline build: 22 warnings 2 failures (mainline/v4.7-rc1-247-g049ec1b)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 049ec1b Merge tag 'drm-fixes-for-v4.7-rc2' of git://people.freedesktop.org/~airlied/linux Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v4.7-rc1-247-g049ec1b/ Runtime: 8m 6s Passed: 118 Failed: 2 Warnings: 22 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: arm64.allmodconfig powerpc.pasemi_defconfig ------------------------------------------------------------------------------- Errors: arm64.allmodconfig: /work/build/batch/samples/seccomp/bpf-fancy.c:13:27: fatal error: linux/seccomp.h: No such file or directory /work/build/batch/samples/seccomp/bpf-helper.h:20:50: fatal error: linux/seccomp.h: No such file or directory /work/build/batch/samples/seccomp/dropper.c:20:27: fatal error: linux/seccomp.h: No such file or directory /work/build/batch/samples/seccomp/bpf-direct.c:21:27: fatal error: linux/seccomp.h: No such file or directory powerpc.pasemi_defconfig: /work/build/batch/arch/powerpc/kernel/ptrace.c:379:104: error: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Werror=array-bounds] /work/build/batch/arch/powerpc/kernel/ptrace.c:407:104: error: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Werror=array-bounds] Warnings: 1 drivers/block/floppy.c:1777:44: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:1779:44: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:4487:45: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:4495:45: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:810:44: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:825:43: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:826:43: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/gpu/drm/omapdrm/dss/dsi.c:1170:6: warning: unused variable 'r' [-Wunused-variable] 1 drivers/gpu/drm/omapdrm/dss/hdmi5.c:123:6: warning: unused variable 'r' [-Wunused-variable] 1 drivers/infiniband/core/cma.c:1253:12: warning: 'src_addr_storage.sin_addr.s_addr' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 drivers/of/of_reserved_mem.c:131:180: warning: comparison of distinct pointer types lacks a cast 1 drivers/of/of_reserved_mem.c:131:182: warning: comparison of distinct pointer types lacks a cast 1 drivers/of/of_reserved_mem.c:131:364: warning: comparison of distinct pointer types lacks a cast 1 drivers/of/of_reserved_mem.c:131:368: warning: comparison of distinct pointer types lacks a cast 1 drivers/phy/phy-exynos-mipi-video.c:238:13: warning: 'val' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 drivers/staging/iio/adc/ad7606_spi.c:24:18: warning: 'data' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 fs/reiserfs/ibalance.c:1156:2: warning: 'new_insert_key' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 include/sound/control.h:219:9: warning: 'master_vol' may be used uninitialized in this function [-Wmaybe-uninitialized] 2 drivers/net/wireless/intel/iwlegacy/3945.c:1022:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] 2 drivers/xen/balloon.c:154:13: warning: 'release_memory_resource' declared 'static' but never defined [-Wunused-function] Section mismatches:

8 years

arm-soc build: 13 warnings 2 failures (arm-soc/v4.6-11559-gb564cfc)

by Olof's autobuilder

8 years

mainline boot: 566 boots: 0 failed, 564 passed with 2 offline (v4.7-rc1-247-g049ec1b5a76d)

by kernelci.org bot

mainline boot: 566 boots: 0 failed, 564 passed with 2 offline (v4.7-rc1-247-g049ec1b5a76d) Full Boot Summary: https://kernelci.org/boot/all/job/mainline/kernel/v4.7-rc1-247-g049ec1b5a76… Full Build Summary: https://kernelci.org/build/mainline/kernel/v4.7-rc1-247-g049ec1b5a76d/ Tree: mainline Branch: local/master Git Describe: v4.7-rc1-247-g049ec1b5a76d Git Commit: 049ec1b5a76d34a6980cccdb7c0baeb4eed7a993 Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git Tested: 103 unique boards, 24 SoC families, 37 builds out of 143 Offline Platforms: arm: multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y: hip04-d01: 1 offline lab multi_v7_defconfig+CONFIG_EFI=y: hip04-d01: 1 offline lab --- For more info write to <info(a)kernelci.org>

8 years

master build: 0 failures 5 warnings (v4.7-rc1-247-g049ec1b)

by Build bot for Mark Brown

Tree/Branch: master Git describe: v4.7-rc1-247-g049ec1b Commit: 049ec1b5a7 Merge tag 'drm-fixes-for-v4.7-rc2' of git://people.freedesktop.org/~airlied/linux Build Time: 79 min 39 sec Passed: 9 / 9 (100.00 %) Failed: 0 / 9 ( 0.00 %) Errors: 0 Warnings: 5 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 3 warnings 0 mismatches : arm64-allmodconfig 2 warnings 0 mismatches : arm-allmodconfig 1 warnings 0 mismatches : arm64-defconfig ------------------------------------------------------------------------------- Warnings Summary: 5 2 ../drivers/xen/balloon.c:154:13: warning: 'release_memory_resource' declared 'static' but never defined [-Wunused-function] 1 ../fs/reiserfs/ibalance.c:1156:2: warning: 'new_insert_key' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 ../drivers/staging/iio/adc/ad7606_spi.c:24:18: warning: 'data' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 ../drivers/gpu/drm/omapdrm/dss/hdmi5.c:123:6: warning: unused variable 'r' [-Wunused-variable] 1 ../drivers/gpu/drm/omapdrm/dss/dsi.c:1170:6: warning: unused variable 'r' [-Wunused-variable] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm64-allmodconfig : PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: ../fs/reiserfs/ibalance.c:1156:2: warning: 'new_insert_key' may be used uninitialized in this function [-Wmaybe-uninitialized] ../drivers/staging/iio/adc/ad7606_spi.c:24:18: warning: 'data' may be used uninitialized in this function [-Wmaybe-uninitialized] ../drivers/xen/balloon.c:154:13: warning: 'release_memory_resource' declared 'static' but never defined [-Wunused-function] ------------------------------------------------------------------------------- arm-allmodconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: ../drivers/gpu/drm/omapdrm/dss/dsi.c:1170:6: warning: unused variable 'r' [-Wunused-variable] ../drivers/gpu/drm/omapdrm/dss/hdmi5.c:123:6: warning: unused variable 'r' [-Wunused-variable] ------------------------------------------------------------------------------- arm64-defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../drivers/xen/balloon.c:154:13: warning: 'release_memory_resource' declared 'static' but never defined [-Wunused-function] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allnoconfig x86_64-allnoconfig

8 years

arm-soc boot: 41 passed 12 failed (arm-soc/v4.6-11559-gb564cfc)

by Olof's autobooter

Full logs are available at http://arm-soc.lixom.net/bootlogs/arm-soc/v4.6-11559-gb564cfc/ Failed boards: arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver arm-tegra_defconfig : FAILED 1:48.89 beaver arm-multi_v7_defconfig : FAILED 1:58.16 beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:50.23 omap5uevm arm-multi_v7_defconfig : FAILED 2:06.15 omap5uevm arm-multi_lpae_defconfig : FAILED 2:08.14 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-exynos_defconfig : FAILED 1:48.15 pi arm-multi_v7_defconfig : FAILED 1:58.50 pi arm-multi_lpae_defconfig : FAILED 2:00.54 pi multi_v7_nosmp_defconfig : NO BUILD pit arm-exynos_defconfig : FAILED 1:48.78 pit arm-multi_v7_defconfig : FAILED 1:55.58 pit arm-multi_lpae_defconfig : FAILED 1:55.91 pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball arm-multi_v7_defconfig : FAILED 2:23.52 snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD Successful boards: apc arm-vt8500_v6_v7_defconfig : passed 1:16.24 arndale arm-exynos_defconfig : passed 1:47.53 arndale arm-multi_v7_defconfig : passed 1:39.54 arndale arm-multi_lpae_defconfig : passed 1:26.68 bbb arm-omap2plus_defconfig : passed 1:40.22 bbb arm-multi_v7_defconfig : passed 1:16.93 beagleboard-x15 arm-omap2plus_defconfig : warnings 1:12.29 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:50.75 beagleboard-x15 arm-multi_lpae_defconfig : warnings 0:54.91 capri arm-bcm_defconfig : passed 0:52.18 capri arm-multi_v7_defconfig : passed 1:03.82 chitra powerpc-ppc64_defconfig : passed 2:39.28 colombus arm-sunxi_defconfig : passed 2:35.62 colombus arm-multi_v7_defconfig : passed 2:35.30 colombus arm-multi_lpae_defconfig : passed 2:29.23 cosmic arm-imx_v6_v7_defconfig : passed 3:24.10 cosmic arm-multi_v7_defconfig : passed 3:00.95 cubie arm-sunxi_defconfig : passed 0:50.42 cubie arm-multi_v7_defconfig : passed 0:51.86 cubie2 arm-sunxi_defconfig : passed 0:50.17 cubie2 arm-multi_v7_defconfig : passed 0:53.95 cubie2 arm-multi_lpae_defconfig : passed 0:53.96 cubox arm-multi_v7_defconfig : passed 1:05.81 cubox arm-mvebu_v7_defconfig : passed 0:59.26 dalmore arm-tegra_defconfig : warnings 1:28.15 dalmore arm-multi_v7_defconfig : warnings 1:31.56 dalmore arm-multi_lpae_defconfig : warnings 1:35.34 jetsontk1 arm-tegra_defconfig : warnings 0:53.38 jetsontk1 arm-multi_v7_defconfig : warnings 0:50.08 jetsontk1 arm-multi_lpae_defconfig : warnings 0:58.21 omap5uevm arm-omap2plus_defconfig : passed 1:09.86 parallella arm-multi_v7_defconfig : passed 2:40.66 seaboard arm-tegra_defconfig : warnings 1:03.20 seattle arm64-defconfig : passed 2:26.65 snow arm-exynos_defconfig : passed 2:14.26 snow arm-multi_v7_defconfig : passed 2:04.36 snow arm-multi_lpae_defconfig : passed 2:00.88 trimslice arm-tegra_defconfig : warnings 1:41.42 trimslice arm-multi_v7_defconfig : warnings 1:42.73 wandboard arm-imx_v6_v7_defconfig : passed 1:14.36 wandboard arm-multi_v7_defconfig : passed 1:14.24 Offline boards: colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:17.24 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:22.28 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:21.88 hummingboard arm-multi_v7_defconfig : OFFLINE 2:12.26 pandaes arm-omap2plus_defconfig : OFFLINE 2:15.43 pandaes arm-multi_v7_defconfig : OFFLINE 2:21.28 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:45.67 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:44.49 sama5 arm-sama5_defconfig : OFFLINE 2:21.21 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:21.74 seaboard arm-multi_v7_defconfig : OFFLINE 2:20.05 snowball arm-u8500_defconfig : OFFLINE 2:19.53 socfpga arm-socfpga_defconfig : OFFLINE 2:21.71 socfpga arm-multi_v7_defconfig : OFFLINE 2:12.23 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.408057] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.415013] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.421532] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.428472] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.434056] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.441061] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.451059] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.462596] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.469214] [drm] No driver support for vblank timestamp query. [ 3.475152] drm drm: No connectors reported connected with modes [ 3.481158] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.506328] Console: switching to colour frame buffer device 128x48 [ 3.518492] drm drm: fb0: frame buffer device [ 3.533346] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.544155] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.550620] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.556029] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.563864] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.578360] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.585113] hub 1-0:1.0: USB hub found [ 3.588892] hub 1-0:1.0: 1 port detected [ 3.593824] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.599237] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.606970] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.618352] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.625026] hub 2-0:1.0: USB hub found [ 3.628794] hub 2-0:1.0: 1 port detected [ 3.637602] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.651284] vdd_sata,avdd_plle: disabling [ 3.656000] usb1_vbus: disabling [ 3.660097] Waiting for root device /dev/mmcblk0p1... [ 3.938357] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.876568] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:54]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:55]: got exception: timeout ~$off [PYBOOT] [beaver 01:56]: Done. ======================================================================== Board beaver-arm-tegra_defconfig failure log: ------------------------------------------------- [ 6.444193] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 6.451233] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.456840] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.464348] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.474349] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.486946] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.493564] [drm] No driver support for vblank timestamp query. [ 6.499567] drm drm: No connectors reported connected with modes [ 6.505579] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.531417] Console: switching to colour frame buffer device 128x48 [ 6.543212] drm drm: fb0: frame buffer device [ 6.570777] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.580062] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.586541] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.591974] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.599932] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.620784] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.628394] hub 1-0:1.0: USB hub found [ 6.632178] hub 1-0:1.0: 1 port detected [ 6.636979] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.642405] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.650277] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.670779] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.678269] hub 2-0:1.0: USB hub found [ 6.682044] hub 2-0:1.0: 1 port detected [ 6.690238] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:03 UTC (946684803) [ 6.708410] vdd_sata,avdd_plle: disabling [ 6.712829] usb1_vbus: disabling [ 6.716236] ALSA device list: [ 6.719192] #0: NVIDIA Tegra Beaver [ 6.723444] Waiting for root device /dev/mmcblk0p1... [ 7.000783] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 7.986170] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:46]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:47]: got exception: timeout ~$off [PYBOOT] [beaver 01:48]: Done. ======================================================================== Board odroidu3-arm-exynos_defconfig failure log: ------------------------------------------------- [ 1.777772] usbhid: USB HID core driver [ 1.786375] NET: Registered protocol family 10 [ 1.786991] sit: IPv6 over IPv4 tunneling driver [ 1.791761] NET: Registered protocol family 17 [ 1.795018] NET: Registered protocol family 15 [ 1.799491] Key type dns_resolver registered [ 1.803819] Registering SWP/SWPB emulation handler [ 1.811756] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.816380] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.823793] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.830937] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.837519] [drm] No driver support for vblank timestamp query. [ 1.843437] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.849791] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.854988] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.862225] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.871289] mmc1: new high speed MMC card at address 0001 [ 1.876853] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.885834] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.887206] max98090 1-0010: MAX98090 REVID=0x43 [ 1.891750] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.893308] max98090 1-0010: use default 2.8v micbias [ 1.902498] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.909375] mmcblk1: p1 p2 [ 1.910606] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.925482] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.960110] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.982484] VDD10_HDMI_1.0V: disabling [ 1.983211] vdd_g3d: disabling [ 1.984274] BUCK8_2.8V: disabling [ 1.988340] ALSA device list: [ 1.989874] #0: Odroid-U3 [ 1.993790] Waiting for root device /dev/mmcblk0p2... [PYBOOT] [odroidu3 01:47]: Timed out waiting for "<type 'str'>": [PYBOOT] [odroidu3 01:48]: got exception: timeout ~$off [PYBOOT] [odroidu3 01:49]: Done. ======================================================================== Board omap5uevm-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.938283] SMPS6: supplied by vsys_cobra [ 1.942821] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.950429] mmc0: new high speed MMC card at address 0001 [ 1.956201] SMPS7: supplied by vsys_cobra [ 1.960445] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.965364] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.971707] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.978275] vdds_1v8_main: supplied by smps7 [ 1.983671] SMPS8: supplied by vsys_cobra [ 1.989397] SMPS9: supplied by vsys_cobra [ 1.993887] smps9: Bringing 0uV into 2100000-2100000uV [ 2.001813] LDO1: supplied by vsys_cobra [ 2.006267] ldo1: Bringing 0uV into 1800000-1800000uV [ 2.012659] LDO2: supplied by vsys_cobra [ 2.013953] smsc95xx v1.0.4 [ 2.020029] ldo2: Bringing 0uV into 2800000-2800000uV [ 2.026442] LDO3: supplied by vdds_1v8_main [ 2.032434] LDO4: supplied by vdds_1v8_main [ 2.037128] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.043519] LDO5: supplied by vsys_cobra [ 2.049259] LDO6: supplied by vdds_1v8_main [ 2.056753] LDO7: supplied by vsys_cobra [ 2.061203] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.063720] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, de:b0:b6:fb:4c:34 [ 2.079266] LDO8: supplied by vsys_cobra [ 2.084985] LDO9: supplied by vmmcsd_fixed [ 2.091077] LDOLN: supplied by vsys_cobra [ 2.096918] LDOUSB: supplied by vsys_cobra [ 2.105815] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.129979] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.137668] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.145566] cpufreq: cpufreq_online: CP[i ng r e2q.1ue4st at virtual address b01e05b0 o: 1500000 KHz [PYBOOT] [omap5uevm 02:05]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 02:06]: got exception: timeout ~$off [PYBOOT] [omap5uevm 02:07]: Done. ======================================================================== Board omap5uevm-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.920478] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.935991] SMPS6: supplied by vsys_cobra [ 1.940525] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.948138] mmc0: new high speed MMC card at address 0001 [ 1.954045] SMPS7: supplied by vsys_cobra [ 1.958334] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.963245] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.969598] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.976461] vdds_1v8_main: supplied by smps7 [ 1.982511] SMPS8: supplied by vsys_cobra [ 1.988272] SMPS9: supplied by vsys_cobra [ 1.992781] smps9: Bringing 0uV into 2100000-2100000uV [ 2.000859] LDO1: supplied by vsys_cobra [ 2.005290] ldo1: Bringing 0uV into 1800000-1800000uV [ 2.011870] LDO2: supplied by vsys_cobra [ 2.016144] smsc95xx v1.0.4 [ 2.019528] ldo2: Bringing 0uV into 2800000-2800000uV [ 2.026024] LDO3: supplied by vdds_1v8_main [ 2.032084] LDO4: supplied by vdds_1v8_main [ 2.036784] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.043211] LDO5: supplied by vsys_cobra [ 2.049010] LDO6: supplied by vdds_1v8_main [ 2.056538] LDO7: supplied by vsys_cobra [ 2.060952] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.067455] LDO8: supplied by vsys_cobra [ 2.073266] LDO9: supplied by vmmcsd_fixed [ 2.079396] LDOLN: supplied by vsys_cobra [ 2.085264] LDOUSB: supplied by vsys_cobra [ 2.094365] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.102084] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 9a:ad:a6:c0:49:8b [ 2.117687] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.125434] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.133346] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz [PYBOOT] [omap5uevm 02:02]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 02:03]: got exception: timeout ~$off [PYBOOT] [omap5uevm 02:05]: Done. ======================================================================== Board pi-arm-exynos_defconfig failure log: ------------------------------------------------- [ 2.769376] usb 1-1: New USB device found, idVendor=2232, idProduct=1056 [ 2.774620] usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.781764] dwmmc_exynos 12210000.mmc: 1 slots initialized [ 2.787817] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations [ 2.787895] exynos-drm exynos-drm: bound 14400000.fimd (ops fimd_component_ops) [ 2.787977] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops) [ 2.810600] usb 1-1: Product: WebCam SC-10HDM13631N [ 2.815438] usb 1-1: Manufacturer: Generic [ 2.819494] usb 1-1: SerialNumber: 200901010001 [ 2.851152] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 2.863580] mmc2: new high speed SDIO card at address 0001 [ 2.895659] exynos-drm exynos-drm: bound 145b0000.dp-controller (ops exynos_dp_ops) [ 2.902012] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_component_ops) [ 2.909137] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.915727] [drm] No driver support for vblank timestamp query. [ 2.922485] exynos-dp 145b0000.dp-controller: EDID data does not include any extensions. [ 2.943956] exynos-dp 145b0000.dp-controller: Link Training Clock Recovery success [ 2.945688] exynos-dp 145b0000.dp-controller: Link Training success! [ 2.950299] exynos-dp 145b0000.dp-controller: Timeout of video streamclk ok [ 2.950302] exynos-dp 145b0000.dp-controller: unable to config video [ 3.035190] Console: switching to colour frame buffer device 274x77 [ 3.127139] exynos-drm exynos-drm: fb0: frame buffer device [ 3.145126] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 3.150174] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 3.157680] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 3.180297] vdd_1v2_2: disabling [ 3.182207] TPS65090_RAILSDCDC3: disabling [ 3.186160] TPS65090_RAILSLDO1: disabling [ 3.190137] TPS65090_RAILSLDO2: disabling [ 3.194623] ALSA device list: [ 3.197076] #0: Peach-Pi-I2S-MAX98091 [ 3.201708] Waiting for root device /dev/mmcblk0p1... [ 27.145138] random: nonblocking pool is initialized [PYBOOT] [pi 01:45]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 01:46]: got exception: timeout ~$off [PYBOOT] [pi 01:47]: Done. ======================================================================== Board pi-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.534901] usbhid: USB HID core driver [ 1.538799] isl29018 7-0044: No cache defaults, reading back from HW [ 1.545151] isl29018 7-0044: Failed to read 1: -6 [ 1.549737] isl29018 7-0044: regmap initialization fails: -6 [ 1.560660] NET: Registered protocol family 10 [ 1.565099] sit: IPv6 over IPv4 tunneling driver [ 1.568673] NET: Registered protocol family 17 [ 1.572679] can: controller area network core (rev 20120528 abi 9) [ 1.578869] NET: Registered protocol family 29 [ 1.583256] can: raw protocol (rev 20120528) [ 1.587506] can: broadcast manager protocol (rev 20120528 t) [ 1.593148] can: netlink gateway (rev 20130117) max_hops=1 [ 1.598874] Key type dns_resolver registered [ 1.603194] ThumbEE CPU extension supported. [ 1.607116] Registering SWP/SWPB emulation handler [ 1.617046] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622530] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.628897] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.634271] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.643665] mmc0: mmc_select_hs200 failed, error 3 [ 1.648312] mmc0: error 3 whilst initialising MMC card [ 1.655153] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.664943] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.670551] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.676781] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.682159] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.691860] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.714211] Waiting for root device /dev/mmcblk0p1... [ 2.583605] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597789] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603254] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609627] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.615010] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [PYBOOT] [pi 01:57]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 01:58]: got exception: timeout ~$off [PYBOOT] [pi 02:00]: Done. ======================================================================== Board pi-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.529431] usbhid: USB HID core driver [ 1.533331] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539681] isl29018 7-0044: Failed to read 1: -6 [ 1.544265] isl29018 7-0044: regmap initialization fails: -6 [ 1.555159] NET: Registered protocol family 10 [ 1.559593] sit: IPv6 over IPv4 tunneling driver [ 1.563165] NET: Registered protocol family 17 [ 1.567174] can: controller area network core (rev 20120528 abi 9) [ 1.573364] NET: Registered protocol family 29 [ 1.577751] can: raw protocol (rev 20120528) [ 1.582000] can: broadcast manager protocol (rev 20120528 t) [ 1.587642] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593380] Key type dns_resolver registered [ 1.597692] ThumbEE CPU extension supported. [ 1.601611] Registering SWP/SWPB emulation handler [ 1.611505] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.616987] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623356] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628731] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638128] mmc0: mmc_select_hs200 failed, error 3 [ 1.642773] mmc0: error 3 whilst initialising MMC card [ 1.649604] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.659359] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.664969] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671197] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676575] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686255] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708498] Waiting for root device /dev/mmcblk0p1... [ 2.583158] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597314] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602770] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609143] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614530] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [PYBOOT] [pi 01:54]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 01:55]: got exception: timeout ~$off [PYBOOT] [pi 01:56]: Done. ======================================================================== Board pit-arm-exynos_defconfig failure log: ------------------------------------------------- [ 2.707206] big.LITTLE switcher initializing [ 2.711447] bL_switcher_halve_cpus: no CPU pairing possible [ 2.716998] big.LITTLE switcher initialization failed [ 2.734409] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling [ 2.738599] s3c-rtc 101e0000.rtc: warning: invalid RTC value so initializing it [ 2.746009] s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc1 [ 2.753830] asix 3-1:1.0 eth0: register 'asix' at usb-xhci-hcd.3.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:43:ee:23 [ 2.763438] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.763485] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.763493] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.763508] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 2.763687] dwmmc_exynos 12210000.mmc: allocated mmc-pwrseq [ 2.791320] dwmmc_exynos 12210000.mmc: 1 slots initialized [ 2.791943] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 2.792288] usb 1-1: New USB device found, idVendor=2232, idProduct=1056 [ 2.792293] usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.792297] usb 1-1: Product: WebCam SC-10HDM13631N [ 2.792300] usb 1-1: Manufacturer: Generic [ 2.792304] usb 1-1: SerialNumber: 200901010001 [ 2.802379] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 2.829192] vdd_1v2_2: disabling [ 2.829349] TPS65090_RAILSDCDC3: disabling [ 2.835431] lcd_vdd: disabling [ 2.838436] TPS65090_RAILSLDO1: disabling [ 2.838441] TPS65090_RAILSLDO2: disabling [ 2.838952] ALSA device list: [ 2.838955] #0: Peach-Pit-I2S-MAX98090 [ 2.884444] Waiting for root device /dev/mmcblk0p1... [ 2.890129] Power domain power-domain@10044120 disable failed [ 2.897618] Power domain power-domain@10044020 disable failed [ 2.922656] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 2.935152] mmc2: new high speed SDIO card at address 0001 [ 42.890137] random: nonblocking pool is initialized [PYBOOT] [pit 01:46]: Timed out waiting for "<type 'str'>": [PYBOOT] [pit 01:47]: got exception: timeout ~$off [PYBOOT] [pit 01:48]: Done. ======================================================================== Board pit-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.529736] usbhid: USB HID core driver [ 1.533634] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539988] isl29018 7-0044: Failed to read 1: -6 [ 1.544571] isl29018 7-0044: regmap initialization fails: -6 [ 1.555517] NET: Registered protocol family 10 [ 1.559946] sit: IPv6 over IPv4 tunneling driver [ 1.563530] NET: Registered protocol family 17 [ 1.567531] can: controller area network core (rev 20120528 abi 9) [ 1.573720] NET: Registered protocol family 29 [ 1.578108] can: raw protocol (rev 20120528) [ 1.582357] can: broadcast manager protocol (rev 20120528 t) [ 1.587999] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593725] Key type dns_resolver registered [ 1.598047] ThumbEE CPU extension supported. [ 1.601968] Registering SWP/SWPB emulation handler [ 1.611890] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617373] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623739] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.629115] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638520] mmc0: mmc_select_hs200 failed, error 3 [ 1.643156] mmc0: error 3 whilst initialising MMC card [ 1.649992] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.659805] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.665413] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671642] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.677019] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686712] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708338] Waiting for root device /dev/mmcblk0p1... [ 2.583439] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:43:ee:23 [ 2.597586] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603042] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609415] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614798] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [PYBOOT] [pit 01:53]: Timed out waiting for "<type 'str'>": [PYBOOT] [pit 01:54]: got exception: timeout ~$off [PYBOOT] [pit 01:55]: Done. ======================================================================== Board pit-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.529455] usbhid: USB HID core driver [ 1.533356] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539705] isl29018 7-0044: Failed to read 1: -6 [ 1.544290] isl29018 7-0044: regmap initialization fails: -6 [ 1.555216] NET: Registered protocol family 10 [ 1.559644] sit: IPv6 over IPv4 tunneling driver [ 1.563220] NET: Registered protocol family 17 [ 1.567222] can: controller area network core (rev 20120528 abi 9) [ 1.573412] NET: Registered protocol family 29 [ 1.577800] can: raw protocol (rev 20120528) [ 1.582050] can: broadcast manager protocol (rev 20120528 t) [ 1.587691] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593414] Key type dns_resolver registered [ 1.597737] ThumbEE CPU extension supported. [ 1.601660] Registering SWP/SWPB emulation handler [ 1.611548] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617028] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623397] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628773] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638179] mmc0: mmc_select_hs200 failed, error 3 [ 1.642813] mmc0: error 3 whilst initialising MMC card [ 1.649651] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.659413] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.665017] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671247] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676625] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686318] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.707870] Waiting for root device /dev/mmcblk0p1... [ 2.583148] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:43:ee:23 [ 2.597284] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602745] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609116] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614498] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [PYBOOT] [pit 01:52]: Timed out waiting for "<type 'str'>": [PYBOOT] [pit 01:53]: got exception: timeout ~$off [PYBOOT] [pit 01:54]: Done. ======================================================================== Board snowball-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.937805] usbcore: registered new interface driver usbhid [ 1.943420] usbhid: USB HID core driver [ 1.957366] NET: Registered protocol family 10 [ 1.963317] sit: IPv6 over IPv4 tunneling driver [ 1.969146] NET: Registered protocol family 17 [ 1.973602] can: controller area network core (rev 20120528 abi 9) [ 1.979919] NET: Registered protocol family 29 [ 1.984405] can: raw protocol (rev 20120528) [ 1.988677] can: broadcast manager protocol (rev 20120528 t) [ 1.994354] can: netlink gateway (rev 20130117) max_hops=1 [ 2.000701] Key type dns_resolver registered [ 2.005310] ThumbEE CPU extension supported. [ 2.009613] Registering SWP/SWPB emulation handler [ 2.021911] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.029144] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.038635] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.045684] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.052734] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.059753] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.076934] db8500-esram12: disabling [ 2.080780] db8500-esram34: disabling [ 2.084533] en-3v3-fixed-supply: disabling [ 2.090148] V-CSI/DSI: disabling [ 2.095489] mmci-reg: disabling [ 2.099395] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.105438] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.112030] Waiting for root device /dev/mmcblk0p4... [ 2.136260] mmc3: new high speed MMC card at address 0001 [ 2.142608] mmcblk3: mmc3:0001 3.53 GiB [ 2.147003] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.152801] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.158569] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.165466] mmcblk3: p1 p2 p3 p4 [PYBOOT] [snowball 02:20]: Timed out waiting for "<type 'str'>": [PYBOOT] [snowball 02:21]: got exception: timeout ~$off [PYBOOT] [snowball 02:22]: Done.

8 years

← Newer
1
...
33
34
35
36
37
38
39
40
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports June 2016