Kernel-build-reports

kernel-build-reports@lists.linaro.org

2 participants
104651 discussions

linus/HEAD boot: 33 pass, 0 fail (v3.12-rc4-6-g162bdaf)

by Kevin Hilman build bot

Automated DT boot report for various ARM defconfigs. Boot test simply checks if kernel can boot to initramfs with busybox and run some basic commands (e.g. 'cat /proc/cpuinfo'). Tree/Branch: linus/HEAD Git describe: v3.12-rc4-6-g162bdaf Commit: 162bdafa46 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Full Report =========== arm-tegra_defconfig ------------------- tegra30-beaver PASS: 0 min 16.9 sec arm-omap2plus_defconfig ----------------------- am335x-boneblack PASS: 0 min 34.7 sec omap3-beagle-xm PASS: 0 min 50.8 sec am335x-bone PASS: 0 min 26.1 sec omap3-tobi,3530overo PASS: 0 min 24.3 sec omap4-panda PASS: 1 min 11.3 sec omap4-panda-es PASS: 1 min 10.9 sec omap3-tobi,3730storm PASS: 0 min 23.2 sec omap3-beagle PASS: 0 min 50.3 sec arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.2 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.2 sec imx6q-wandboard PASS: 0 min 14.9 sec arm-multi_v7_defconfig ---------------------- ste-snowball PASS: 0 min 30.6 sec tegra30-beaver PASS: 0 min 16.9 sec am335x-boneblack PASS: 0 min 39.4 sec omap3-beagle-xm PASS: 0 min 52.2 sec armada-370-mirabox PASS: 0 min 20.1 sec omap4-panda PASS: 1 min 0.3 sec omap4-panda-es PASS: 1 min 10.3 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.6 sec sun4i-a10-cubieboard PASS: 0 min 14.3 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.4 sec omap3-tobi,3530overo PASS: 0 min 19.6 sec am335x-bone PASS: 0 min 33.2 sec imx6q-wandboard PASS: 0 min 15.8 sec omap3-tobi,3730storm PASS: 0 min 22.2 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-beagle PASS: 0 min 55.0 sec arm-u8500_defconfig ------------------- ste-snowball PASS: 0 min 38.6 sec arm-exynos_defconfig -------------------- exynos5250-arndale PASS: 0 min 29.0 sec arm-mvebu_defconfig ------------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.2 sec armada-370-mirabox PASS: 0 min 19.8 sec arm-sama5_defconfig ------------------- sama5d35ek PASS: 0 min 18.4 sec

10 years, 7 months

mainline boot: 14 passed 0 failed (mainline/v3.12-rc4-6-g162bdaf)

by Olof's autobooter

arndale : passed 0:49.98 bbb : passed 2:03.74 beaver : passed 0:50.16 multi-beaver : passed 0:50.81 cubie : passed 0:58.41 cubie2 : passed 1:10.83 cubox : passed 0:49.98 panda : passed 0:54.39 multi-panda : passed 0:49.81 sama5 : passed 1:39.62 snowball : OFFLINE 0:30.57 multi-snowball : passed 0:35.38 multi-trimslice : passed 0:39.70 wandboard : passed 1:06.75 multi-wandboard : passed 0:41.07 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig multi-wandboard : multi_v7_defconfig

10 years, 7 months

mainline build: 16 warnings 0 failures (mainline/v3.12-rc4-6-g162bdaf)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 162bdaf Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.12-rc4-6-g162bdaf/ Runtime: 39m 44s Passed: 117 Failed: 0 Warnings: 16 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:589:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:599:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 5 net/core/secure_seq.c:17:13: warning: 'net_secret_init' defined but not used [-Wunused-function] Section mismatches:

10 years, 7 months

Tegra baseline test results for v3.12-rc4

by Paul Walmsley

Here are some basic Tegra test results for Linux v3.12-rc4. Logs and other details at: http://nvt.pwsan.com/pub/linux/testlogs/test_v3.12-rc4/20131007004737/ Test summary ------------ Build: zImage: Pass: ( 2/ 2): multi_v7_defconfig, tegra_defconfig Boot to userspace: multi_v7_defconfig: Pass: ( 2/ 2): tegra114-dalmore-headless, tegra30-beaver Boot to userspace: tegra_defconfig: Pass: ( 2/ 2): tegra114-dalmore-headless, tegra30-beaver vmlinux object size (delta in bytes from test_v3.12-rc3 (15c03dd4859ab16f9212238f29dd315654aa94f6)): text data bss total kernel +5384 +176 0 +5560 multi_v7_defconfig +5009 +8 0 +5017 tegra_defconfig Boot-time memory difference (delta in bytes from test_v3.12-rc3 (15c03dd4859ab16f9212238f29dd315654aa94f6)) avail rsrvd high freed board kconfig dtb . . . -4k tegra114-dalmore-hea multi_v7_defconfig tegra114-dalmore -8k 8k . . tegra114-dalmore-hea tegra_defconfig tegra114-dalmore . . . -4k tegra30-beaver multi_v7_defconfig tegra30-beaver -8k 8k . . tegra30-beaver tegra_defconfig tegra30-beaver

10 years, 7 months

queue boot: 9 passed 6 failed (queue/v3.11.4-49-g4f309b3)

by Olof's autobooter

arndale : passed 0:57.12 bbb : FAILED 1:06.98 beaver : passed 0:51.03 multi-beaver : passed 0:49.06 cubie : passed 0:47.86 cubie2 : FAILED 0:52.17 cubox : passed 0:58.40 panda : passed 0:57.84 multi-panda : passed 0:57.44 sama5 : passed 1:37.89 snowball : passed 2:16.60 multi-snowball : FAILED 0:45.55 multi-trimslice : FAILED 0:43.39 wandboard : FAILED 0:45.37 multi-wandboard : FAILED 0:50.76 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig multi-wandboard : multi_v7_defconfig Last entries of failed logs below: ======================================================================== Board bbb failure log: ------------------------------------------------- Environment size: 4202/131068 bytes U-Boot# setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp U-Boot# tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.11.4-49-g4f309b3/uImage.omap tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.11.4-49-g4f309b3/uImage.omap link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.127 Filename '/srv/tftp/queue/v3.11.4-49-g4f309b3/uImage.omap'. Load address: 0x80000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################### 625 KiB/s done Bytes transferred = 4090576 (3e6ad0 hex) U-Boot# tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.11.4-49-g4f309b3/am335x-boneblack.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.11.4-49-g4f309b3/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.127 Filename '/srv/tftp/queue/v3.11.4-49-g4f309b3/am335x-boneblack.dtb'. Load address: 0x81000000 Loading: * TFTP error: 'File not found' (1) Not retrying... U-Boot# ~$off ======================================================================== Board cubie2 failure log: ------------------------------------------------- setargs=if test -z \\"$root\\"; then if test \\"$bootpath\\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs} stderr=serial stdin=serial stdout=serial Environment size: 2098/131068 bytes sun7i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i#tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.11.4-49-g4f309b3/uImage.multi-1g tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.11.4-49-g4f309b3/uImage.multi-1g Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.173 Filename '/srv/tftp/queue/v3.11.4-49-g4f309b3/uImage.multi-1g'. Load address: 0x41000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################################################T ################ ################################################################# ################################################################# #################################################### 503.9 KiB/s done Bytes transferred = 3589688 (36c638 hex) sun7i#tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.11.4-49-g4f309b3/sun7i-a20-cubieboard2.dtb tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.11.4-49-g4f309b3/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.173 Filename '/srv/tftp/queue/v3.11.4-49-g4f309b3/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: * TFTP error: 'File not found' (1) Not retrying... sun7i#node: cubie2 status: on ~$off ======================================================================== Board multi-snowball failure log: ------------------------------------------------- Environment size: 1705/4092 bytes U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.11.4-49-g4f309b3/uImage.multi-snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.11.4-49-g4f309b3/uImage.multi-snowball smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.141 Filename '/srv/tftp/queue/v3.11.4-49-g4f309b3/uImage.multi-snowball'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 3606410 (37078a hex) U8500 $ bootm 0x100000 bootm 0x100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3606346 Bytes = 3.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off ======================================================================== Board multi-trimslice failure log: ------------------------------------------------- Connected to trimslice console [channel connected] (~$quit to exit) ~$hardreset Command(trimslice console)> hardreset (user:build) Reset target U-Boot 2010.09-00172-g1c59bc2 (Mar 21 2011 - 10:25:36) TEGRA2 Board: TrimSlice DRAM: 1 GiB SF: Detected W25Q80BL with page size 256, total 1 MiB In: serial Out: serial Err: serial Boot: Spi Net: RTL8169#0 Hit any key to stop autoboot: 5 0 TrimSlice # version version U-Boot 2010.09-00172-g1c59bc2 (Mar 21 2011 - 10:25:36) TrimSlice # usb start usb start (Re)start USB... USB: Tegra ehci init hccr c5008100 and hcor c5008140 hc_length 64 Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found TrimSlice # setenv autoload no setenv autoload no TrimSlice # dhcp dhcp BOOTP broadcast 1 node: trimslice status: on ~$off ======================================================================== Board multi-wandboard failure log: ------------------------------------------------- script=boot.scr serverip=172.16.1.7 uimage=uImage update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi update_sd_firmware_filename=u-boot.imx Environment size: 2718/8188 bytes => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.11.4-49-g4f309b3/uImage.multi-256m tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.11.4-49-g4f309b3/uImage.multi-256m Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.174 Filename '/srv/tftp/queue/v3.11.4-49-g4f309b3/uImage.multi-256m'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ###########################################T ###################### ####T ############################################################# ################################################################# ################################################################# #################################################### 323.2 KiB/s done Bytes transferred = 3589688 (36c638 hex) => tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.11.4-49-g4f309b3/imx6q-wandboard.dtb tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.11.4-49-g4f309b3/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.174 Filename '/srv/tftp/queue/v3.11.4-49-g4f309b3/imx6q-wandboard.dtb'. Load address: 0x14000000 Loading: * TFTP error: 'File not found' (1) Not retrying... => ~$off ======================================================================== Board wandboard failure log: ------------------------------------------------- update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi update_sd_firmware_filename=u-boot.imx Environment size: 2711/8188 bytes => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.11.4-49-g4f309b3/uImage.imx tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.11.4-49-g4f309b3/uImage.imx Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.174 Filename '/srv/tftp/queue/v3.11.4-49-g4f309b3/uImage.imx'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################################# 4.1 MiB/s done Bytes transferred = 4303728 (41ab70 hex) => tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.11.4-49-g4f309b3/imx6q-wandboard.dtb tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.11.4-49-g4f309b3/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.174 Filename '/srv/tftp/queue/v3.11.4-49-g4f309b3/imx6q-wandboard.dtb'. Load address: 0x14000000 Loading: * TFTP error: 'File not found' (1) Not retrying... => node: wandboard status: on ~$off

10 years, 7 months

queue build: 11 warnings 0 failures (queue/v3.11.4-49-g4f309b3)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: 4f309b3 ip6tnl: allow to use rtnl ops on fb tunnel Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.11.4-49-g4f309b3/ Runtime: 21m 44s Passed: 119 Failed: 0 Warnings: 11 Section mismatches: 8 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 arch/arm/mach-omap2/gpmc.c:1495:4: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3228:2: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3582:3: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3582:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3593:5: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t' [-Wformat=] 1 drivers/mmc/host/tmio_mmc_pio.c:798:19: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 drivers/spi/spi-pl022.c:2197:9: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1134:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 4 drivers/usb/host/xhci.c:3574:17: warning: unused variable 'dev' [-Wunused-variable] 4 drivers/usb/host/xhci.c:3660:17: warning: unused variable 'dev' [-Wunused-variable] 5 net/core/secure_seq.c:17:13: warning: 'net_secret_init' defined but not used [-Wunused-function] Section mismatches: 1 bcm_defconfig WARNING: drivers/built-in.o(.data+0x5a7c): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: drivers/built-in.o(.data+0x5aa4): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown) 1 bcm_defconfig WARNING: drivers/mmc/built-in.o(.data+0x4dc): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: drivers/mmc/built-in.o(.data+0x504): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown) 1 bcm_defconfig WARNING: drivers/mmc/host/built-in.o(.data+0x0): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: drivers/mmc/host/built-in.o(.data+0x28): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown) 1 bcm_defconfig WARNING: vmlinux.o(.data+0xe43c): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: vmlinux.o(.data+0xe464): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown)

10 years, 7 months

queue boot: 6 passed 9 failed (queue/v3.10.15-42-g6312d8c)

by Olof's autobooter

arndale : passed 0:48.84 bbb : FAILED 1:18.83 beaver : passed 0:39.19 multi-beaver : FAILED 0:42.44 cubie : FAILED 0:20.96 cubie2 : FAILED 0:57.07 cubox : passed 0:49.43 panda : passed 1:04.51 multi-panda : FAILED 0:47.01 sama5 : passed 1:39.66 snowball : passed 1:09.81 multi-snowball : FAILED 0:58.60 multi-trimslice : FAILED 0:43.69 wandboard : FAILED 0:46.09 multi-wandboard : FAILED 0:40.48 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig multi-wandboard : multi_v7_defconfig Last entries of failed logs below: ======================================================================== Board bbb failure log: ------------------------------------------------- Environment size: 4203/131068 bytes U-Boot# setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp U-Boot# tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-g6312d8c/uImage.omap tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-g6312d8c/uImage.omap link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.127 Filename '/srv/tftp/queue/v3.10.15-42-g6312d8c/uImage.omap'. Load address: 0x80000000 Loading: *################################################################# ################################################################# #######################################T ########################## ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################T ################################################ ################################################################# ################################################################# ################################################################# ##### 240.2 KiB/s done Bytes transferred = 4017856 (3d4ec0 hex) U-Boot# tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-g6312d8c/am335x-boneblack.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-g6312d8c/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.127 Filename '/srv/tftp/queue/v3.10.15-42-g6312d8c/am335x-boneblack.dtb'. Load address: 0x81000000 Loading: * TFTP error: 'File not found' (1) Not retrying... U-Boot# ~$off ======================================================================== Board cubie failure log: ------------------------------------------------- io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2> Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A console [ttyS0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 Registering SWP/SWPB emulation handler ../../drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VF~$off ======================================================================== Board cubie2 failure log: ------------------------------------------------- netmask=255.255.255.0 panicarg=panic=10 partition=0:1 scriptaddr=0x44000000 serverip=172.16.1.4 setargs=if test -z \\"$root\\"; then if test \\"$bootpath\\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs} stderr=serial stdin=serial stdout=serial Environment size: 2099/131068 bytes sun7i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i#tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-g6312d8c/uImage.multi-1g tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-g6312d8c/uImage.multi-1g Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.173 Filename '/srv/tftp/queue/v3.10.15-42-g6312d8c/uImage.multi-1g'. Load address: 0x41000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ###########T #################### 294.9 KiB/s done Bytes transferred = 1819944 (1bc528 hex) sun7i#tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-g6312d8c/sun7i-a20-cubieboard2.dtb tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-g6312d8c/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.173 Filename '/srv/tftp/queue/v3.10.15-42-g6312d8c/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: * TFTP error: 'File not found' (1) Not retrying... sun7i#node: cubie2 status: on ~$off ======================================================================== Board multi-beaver failure log: ------------------------------------------------- Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.114 Filename '/srv/tftp/queue/v3.10.15-42-g6312d8c/uImage.multi-2g'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.9 MiB/s done Bytes transferred = 1819944 (1bc528 hex) Tegra30 (Beaver) # tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-g6312d8c/tegra30-beaver.dtb tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-g6312d8c/tegra30-beaver.dtb Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.114 Filename '/srv/tftp/queue/v3.10.15-42-g6312d8c/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: *#### 1.6 MiB/s done Bytes transferred = 16546 (40a2 hex) Tegra30 (Beaver) # bootm 0x82000000 - 0x83000000 bootm 0x82000000 - 0x83000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1819880 Bytes = 1.7 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Kernel Image ... OK Loading Device Tree to 8fff8000, end 8ffff0a1 ... OK Starting kernel ... ~$off ======================================================================== Board multi-panda failure log: ------------------------------------------------- TFTP from server 172.16.1.4; our IP address is 172.16.1.182 Filename '/srv/tftp/queue/v3.10.15-42-g6312d8c/uImage.multi-2g'. Load address: 0x80000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### done Bytes transferred = 1819944 (1bc528 hex) Panda # tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-g6312d8c/omap4-panda-es.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-g6312d8c/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.182 Filename '/srv/tftp/queue/v3.10.15-42-g6312d8c/omap4-panda-es.dtb'. Load address: 0x81000000 Loading: *#### done Bytes transferred = 17271 (4377 hex) Panda # bootm 0x80000000 - 0x81000000 bootm 0x80000000 - 0x81000000 ## Booting kernel from Legacy Image at 80000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1819880 Bytes = 1.7 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81000000 Booting using the fdt blob at 0x81000000 Loading Kernel Image ... OK OK reserving fdt memory region: addr=9d000000 size=3000000 Using Device Tree in place at 81000000, end 81007376 Starting kernel ... ~$off ======================================================================== Board multi-snowball failure log: ------------------------------------------------- ipaddr=172.16.1.141 serverip=172.16.1.7 bootfile=queue/v3.10.15-42-g6312d8c/uImage.multi-snowball autoboot=no Environment size: 1706/4092 bytes U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-g6312d8c/uImage.multi-snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-g6312d8c/uImage.multi-snowball smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.141 Filename '/srv/tftp/queue/v3.10.15-42-g6312d8c/uImage.multi-snowball'. Load address: 0x100000 Loading: *################################################################# ################################################################# ######################################T ###############T ############ ################################################################# ####################T ############################################# ############################### done Bytes transferred = 1819944 (1bc528 hex) U8500 $ bootm 0x100000 bootm 0x100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1819880 Bytes = 1.7 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off ======================================================================== Board multi-trimslice failure log: ------------------------------------------------- *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.154 TrimSlice # setenv bootfile queue/v3.10.15-42-g6312d8c/uImage.multi-trimslice setenv bootfile queue/v3.10.15-42-g6312d8c/uImage.multi-trimslice TrimSlice # setenv autoboot no setenv autoboot no TrimSlice # printenv printenv bootdelay=5 baudrate=115200 loadaddr=0x408000 stdin=serial,usbkbd stdout=serial,lcd stderr=serial,lcd console=ttyS0,115200n8 ethact=RTL8169#0 gateway=172.16.1.1 bootcmd=none bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw autoload=no netmask=255.255.255.0 ipaddr=172.16.1.154 serverip=172.16.1.7 bootfile=queue/v3.10.15-42-g6312d8c/uImage.multi-trimslice autoboot=no Environment size: 376/65532 bytes TrimSlice # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw TrimSlice # tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-g6312d8c/uImage.multi-trimslice tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-g6312d8c/uImage.multi-trimslice Using RTL8169#0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.154 Filename '/srv/tftp/queue/v3.10.15-42-g6312d8c/uImage.multi-trimslice'. Load address: 0x800000 Loading: * TFTP error: 'File not found' (1) Not retrying... TrimSlice # ~$off ======================================================================== Board multi-wandboard failure log: ------------------------------------------------- mmcroot=/dev/mmcblk0p2 ro mmcrootfstype=ext4 rootwait netargs=setenv bootargs console=${console},${baudrate} root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp netboot=echo Booting from net ...; run netargs; if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; ${get_cmd} zImage; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if ${get_cmd} ${fdt_addr} ${fdt_file}; then bootz ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootz ${loadaddr}; else echo WARN: Cannot load the DT; fi; fi; else bootz ${loadaddr}; fi; netmask=255.255.255.0 script=boot.scr serverip=172.16.1.7 uimage=uImage update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi update_sd_firmware_filename=u-boot.imx Environment size: 2719/8188 bytes => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-g6312d8c/uImage.multi-256m tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-g6312d8c/uImage.multi-256m Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.174 Filename '/srv/tftp/queue/v3.10.15-42-g6312d8c/uImage.multi-256m'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 3.8 MiB/s done Bytes transferred = 1819944 (1bc528 hex) => tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-g6312d8c/imx6q-wandboard.dtb tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-g6312d8c/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.174 Filename '/srv/tftp/queue/v3.10.15-42-g6312d8c/imx6q-wandboard.dtb'. Load address: 0x14000000 Loading: * TFTP error: 'File not found' (1) Not retrying... => ~$off ======================================================================== Board wandboard failure log: ------------------------------------------------- uimage=uImage update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi update_sd_firmware_filename=u-boot.imx Environment size: 2712/8188 bytes => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-g6312d8c/uImage.imx tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-g6312d8c/uImage.imx Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.174 Filename '/srv/tftp/queue/v3.10.15-42-g6312d8c/uImage.imx'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################################T ########################### ########################################## 677.7 KiB/s done Bytes transferred = 4204392 (402768 hex) => tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-g6312d8c/imx6q-wandboard.dtb tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.15-42-g6312d8c/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.174 Filename '/srv/tftp/queue/v3.10.15-42-g6312d8c/imx6q-wandboard.dtb'. Load address: 0x14000000 Loading: * TFTP error: 'File not found' (1) Not retrying... => ~$off

10 years, 7 months

queue build: 12 warnings 0 failures (queue/v3.10.15-42-g6312d8c)

by Olof's autobuilder

10 years, 7 months

queue boot: 6 passed 9 failed (queue/v3.10.15-5-g2006582)

by Olof's autobooter

arndale : passed 0:48.37 bbb : FAILED 1:16.48 beaver : passed 0:41.82 multi-beaver : FAILED 0:43.20 cubie2 : FAILED 0:47.65 cubie : FAILED 0:14.61 cubox : passed 0:53.28 panda : passed 0:57.44 multi-panda : FAILED 0:53.25 sama5 : passed 1:33.60 snowball : passed 1:43.62 multi-snowball : FAILED 0:43.89 multi-trimslice : FAILED 0:43.01 wandboard : FAILED 0:51.04 multi-wandboard : FAILED 0:40.92 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig multi-wandboard : multi_v7_defconfig Last entries of failed logs below: ======================================================================== Board bbb failure log: ------------------------------------------------- Environment size: 4202/131068 bytes U-Boot# setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp U-Boot# tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.10.15-5-g2006582/uImage.omap tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.10.15-5-g2006582/uImage.omap link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.127 Filename '/srv/tftp/queue/v3.10.15-5-g2006582/uImage.omap'. Load address: 0x80000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##### 625 KiB/s done Bytes transferred = 4017968 (3d4f30 hex) U-Boot# tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.15-5-g2006582/am335x-boneblack.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.15-5-g2006582/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.127 Filename '/srv/tftp/queue/v3.10.15-5-g2006582/am335x-boneblack.dtb'. Load address: 0x81000000 Loading: * TFTP error: 'File not found' (1) Not retrying... U-Boot# ~$off ======================================================================== Board cubie2 failure log: ------------------------------------------------- netmask=255.255.255.0 panicarg=panic=10 partition=0:1 scriptaddr=0x44000000 serverip=172.16.1.4 setargs=if test -z \\"$root\\"; then if test \\"$bootpath\\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs} stderr=serial stdin=serial stdout=serial Environment size: 2098/131068 bytes sun7i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i#tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.10.15-5-g2006582/uImage.multi-1g tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.10.15-5-g2006582/uImage.multi-1g Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.173 Filename '/srv/tftp/queue/v3.10.15-5-g2006582/uImage.multi-1g'. Load address: 0x41000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.7 MiB/s done Bytes transferred = 1819992 (1bc558 hex) sun7i#tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.10.15-5-g2006582/sun7i-a20-cubieboard2.dtb tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.10.15-5-g2006582/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.173 Filename '/srv/tftp/queue/v3.10.15-5-g2006582/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: * TFTP error: 'File not found' (1) Not retrying... sun7i#node: cubie2 status: on ~$off ======================================================================== Board cubie failure log: ------------------------------------------------- io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2> Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A console [ttyS0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 Registering SWP/SWPB emulation handler ../../drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not s~$off ======================================================================== Board multi-beaver failure log: ------------------------------------------------- Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.114 Filename '/srv/tftp/queue/v3.10.15-5-g2006582/uImage.multi-2g'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.9 MiB/s done Bytes transferred = 1819992 (1bc558 hex) Tegra30 (Beaver) # tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.10.15-5-g2006582/tegra30-beaver.dtb tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.10.15-5-g2006582/tegra30-beaver.dtb Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.114 Filename '/srv/tftp/queue/v3.10.15-5-g2006582/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: *#### 1.3 MiB/s done Bytes transferred = 16546 (40a2 hex) Tegra30 (Beaver) # bootm 0x82000000 - 0x83000000 bootm 0x82000000 - 0x83000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1819928 Bytes = 1.7 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Kernel Image ... OK Loading Device Tree to 8fff8000, end 8ffff0a1 ... OK Starting kernel ... ~$off ======================================================================== Board multi-panda failure log: ------------------------------------------------- TFTP from server 172.16.1.4; our IP address is 172.16.1.182 Filename '/srv/tftp/queue/v3.10.15-5-g2006582/uImage.multi-2g'. Load address: 0x80000000 Loading: *################################################################# ###T ############################################################## ################################################################# ################################################################# ################################################################# ############################### done Bytes transferred = 1819992 (1bc558 hex) Panda # tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.15-5-g2006582/omap4-panda-es.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.15-5-g2006582/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.182 Filename '/srv/tftp/queue/v3.10.15-5-g2006582/omap4-panda-es.dtb'. Load address: 0x81000000 Loading: *#### done Bytes transferred = 17271 (4377 hex) Panda # bootm 0x80000000 - 0x81000000 bootm 0x80000000 - 0x81000000 ## Booting kernel from Legacy Image at 80000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1819928 Bytes = 1.7 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81000000 Booting using the fdt blob at 0x81000000 Loading Kernel Image ... OK OK reserving fdt memory region: addr=9d000000 size=3000000 Using Device Tree in place at 81000000, end 81007376 Starting kernel ... ~$off ======================================================================== Board multi-snowball failure log: ------------------------------------------------- ipaddr=172.16.1.141 serverip=172.16.1.7 bootfile=queue/v3.10.15-5-g2006582/uImage.multi-snowball autoboot=no Environment size: 1705/4092 bytes U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.10.15-5-g2006582/uImage.multi-snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.10.15-5-g2006582/uImage.multi-snowball smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.141 Filename '/srv/tftp/queue/v3.10.15-5-g2006582/uImage.multi-snowball'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### done Bytes transferred = 1819992 (1bc558 hex) U8500 $ bootm 0x100000 bootm 0x100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1819928 Bytes = 1.7 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off ======================================================================== Board multi-trimslice failure log: ------------------------------------------------- *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.154 TrimSlice # setenv bootfile queue/v3.10.15-5-g2006582/uImage.multi-trimslice setenv bootfile queue/v3.10.15-5-g2006582/uImage.multi-trimslice TrimSlice # setenv autoboot no setenv autoboot no TrimSlice # printenv printenv bootdelay=5 baudrate=115200 loadaddr=0x408000 stdin=serial,usbkbd stdout=serial,lcd stderr=serial,lcd console=ttyS0,115200n8 ethact=RTL8169#0 gateway=172.16.1.1 bootcmd=none bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw autoload=no netmask=255.255.255.0 ipaddr=172.16.1.154 serverip=172.16.1.7 bootfile=queue/v3.10.15-5-g2006582/uImage.multi-trimslice autoboot=no Environment size: 375/65532 bytes TrimSlice # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw TrimSlice # tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.10.15-5-g2006582/uImage.multi-trimslice tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.10.15-5-g2006582/uImage.multi-trimslice Using RTL8169#0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.154 Filename '/srv/tftp/queue/v3.10.15-5-g2006582/uImage.multi-trimslice'. Load address: 0x800000 Loading: * TFTP error: 'File not found' (1) Not retrying... TrimSlice # ~$off ======================================================================== Board multi-wandboard failure log: ------------------------------------------------- mmcroot=/dev/mmcblk0p2 ro mmcrootfstype=ext4 rootwait netargs=setenv bootargs console=${console},${baudrate} root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp netboot=echo Booting from net ...; run netargs; if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; ${get_cmd} zImage; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if ${get_cmd} ${fdt_addr} ${fdt_file}; then bootz ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootz ${loadaddr}; else echo WARN: Cannot load the DT; fi; fi; else bootz ${loadaddr}; fi; netmask=255.255.255.0 script=boot.scr serverip=172.16.1.7 uimage=uImage update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi update_sd_firmware_filename=u-boot.imx Environment size: 2718/8188 bytes => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.15-5-g2006582/uImage.multi-256m tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.15-5-g2006582/uImage.multi-256m Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.174 Filename '/srv/tftp/queue/v3.10.15-5-g2006582/uImage.multi-256m'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 3.7 MiB/s done Bytes transferred = 1819992 (1bc558 hex) => tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.15-5-g2006582/imx6q-wandboard.dtb tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.15-5-g2006582/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.174 Filename '/srv/tftp/queue/v3.10.15-5-g2006582/imx6q-wandboard.dtb'. Load address: 0x14000000 Loading: * TFTP error: 'File not found' (1) Not retrying... => ~$off ======================================================================== Board wandboard failure log: ------------------------------------------------- uimage=uImage update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi update_sd_firmware_filename=u-boot.imx Environment size: 2711/8188 bytes => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.15-5-g2006582/uImage.imx tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.15-5-g2006582/uImage.imx Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.174 Filename '/srv/tftp/queue/v3.10.15-5-g2006582/uImage.imx'. Load address: 0x12000000 Loading: *################################################################# ################################################################# #########################T ###################################T ##### ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################################## 369.1 KiB/s done Bytes transferred = 4203720 (4024c8 hex) => tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.15-5-g2006582/imx6q-wandboard.dtb tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.15-5-g2006582/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.174 Filename '/srv/tftp/queue/v3.10.15-5-g2006582/imx6q-wandboard.dtb'. Load address: 0x14000000 Loading: * TFTP error: 'File not found' (1) Not retrying... => ~$off

10 years, 7 months

queue build: 11 warnings 0 failures (queue/v3.10.15-5-g2006582)

by Olof's autobuilder

10 years, 7 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports