Automated DT boot report for various ARM defconfigs.
Boot test simply checks if kernel can boot to initramfs with busybox and run some basic commands (e.g. 'cat /proc/cpuinfo').
Tree/Branch: next/master Git describe: next-20130916 Commit: ade7b661ae Add linux-next specific files for 20130916
Failed boot tests (console logs at the end) =========================================== omap4-panda: FAIL: arm-multi_v7_defconfig sama5d35ek: FAIL: arm-sama5_defconfig
Full Report ===========
arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.3 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.3 sec imx6q-wandboard PASS: 0 min 15.0 sec
arm-omap2plus_defconfig ----------------------- omap3-beagle-xm PASS: 0 min 48.8 sec am335x-bone PASS: 0 min 26.3 sec omap3-tobi,3530overo PASS: 0 min 42.3 sec omap4-panda PASS: 1 min 1.7 sec omap4-panda-es PASS: 1 min 9.5 sec omap3-tobi,3730storm PASS: 0 min 41.8 sec omap3-beagle PASS: 0 min 50.5 sec
arm-multi_v7_defconfig ---------------------- omap4-panda-es PASS: 1 min 8.6 sec omap3-beagle-xm PASS: 0 min 51.1 sec am335x-bone PASS: 0 min 33.3 sec sun4i-a10-cubieboard PASS: 0 min 11.5 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.4 sec omap3-tobi,3530overo PASS: 0 min 43.8 sec omap4-panda FAIL: 2 min 29.1 sec imx6q-wandboard PASS: 0 min 15.7 sec omap3-tobi,3730storm PASS: 0 min 40.4 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-beagle PASS: 0 min 55.2 sec
arm-exynos_defconfig -------------------- exynos5250-arndale PASS: 0 min 33.7 sec
arm-sama5_defconfig ------------------- sama5d35ek FAIL: 0 min 43.0 sec
Console logs for failures =========================
arm-multi_v7_defconfig ----------------------
omap4-panda: FAIL: last 24 lines of boot log: ---------------------------------------------
[ 1.543090] omap_i2c 48060000.i2c: bus 2 rev0.10 at 100 kHz [ 1.549560] omap_i2c 48350000.i2c: bus 3 rev0.10 at 400 kHz [ 1.556060] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 1.563781] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 1.572967] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 1.649414] twl_rtc rtc.10: setting system clock to 2013-09-16 05:50:24 UTC (1379310624) [ 1.694915] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 1.895507] hub 1-1:1.0: USB hub found [ 1.899810] hub 1-1:1.0: 5 ports detected [ 1.916198] mmc0: host does not support reading read-only switch. assuming write-enable. [ 1.926849] mmc0: new high speed SD card at address aaaa [ 1.932952] mmcblk0: mmc0:aaaa SD02G 1.84 GiB [ 1.939239] mmcblk0: p1 p2 [ 2.292816] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 21.111694] EXT4-fs (mmcblk0p2): recovery complete [ 21.125579] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 21.134155] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 21.141784] devtmpfs: mounted [ 21.141784] Freeing unused kernel memory: 464K (c0628000 - c069c000) [ 21.572021] init: ureadahead main process (56) terminated with status 5 ~$off # PYBOOT: Exception: userspace: ERROR: Never found root shell # PYBOOT: Time: 149.12 seconds. # PYBOOT: Result: FAIL
arm-sama5_defconfig -------------------
sama5d35ek: FAIL: last 24 lines of boot log: --------------------------------------------
UBIFS: media format: w4/r0 (latest is w4/r0) UBIFS: default compressor: lzo UBIFS: reserved for root: 0 bytes (0 KiB) VFS: Mounted root (ubifs filesystem) on device 0:11. devtmpfs: mounted Freeing init memory: 144K Starting logging: OK Populating /dev using udev: udevd[561]: starting version 182 atmel_nand 60000000.nand: Bit flip in data area, byte_pos: 741, bit_pos: 0, 0x31 -> 0x30 setenv ethaddr F6:88:82:97:B6:E5 setenv ethaddr F6:88:82:97:B6:E5 done Starting portmap: done Initializing random number generator... done. ALSA: Restoring mixer settings... Starting network... /usr/sbin/alsactl: load_state:1686: No soundcards found... Starting sshd: OK
Welcome to Buildroot buildroot login: ~$off # PYBOOT: Exception: ERROR: Timeout waiting for command: setenv ethaddr F6:88:82:97:B6:E5. # PYBOOT: Time: 42.97 seconds. # PYBOOT: Result: FAIL