Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc5-221-g1b46bac/
Failed boards:
arndale arm-multi_v7_nosmp_defconfig : FAILED 2:25.23 bbb arm-omap2plus_defconfig : FAILED 1:54.22 bbb arm-multi_v7_defconfig : FAILED 1:53.68 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:13.20 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.07 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:44.16 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:47.08 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 1:56.20 beaver arm-tegra_defconfig : FAILED 1:44.58 beaver arm-multi_v7_defconfig : FAILED 1:49.05 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:48.84 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:20.09 cosmic arm-imx_v6_v7_defconfig : FAILED 2:00.91 cosmic arm-multi_v7_defconfig : FAILED 2:05.98 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:10.27 dalmore arm-tegra_defconfig : FAILED 1:48.35 dalmore arm-multi_v7_defconfig : FAILED 1:57.90 dalmore arm-multi_lpae_defconfig : FAILED 1:56.97 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:59.24 omap5uevm arm-multi_v7_defconfig : FAILED 0:50.34 omap5uevm arm-multi_lpae_defconfig : FAILED 2:10.00 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 1:40.41 seaboard arm-tegra_defconfig : FAILED 1:48.94 seaboard arm-multi_v7_defconfig : FAILED 2:04.39 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:50.10 snow arm-multi_v7_nosmp_defconfig : FAILED 3:13.23 snowball arm-u8500_defconfig : FAILED 1:57.23 snowball arm-multi_v7_defconfig : FAILED 2:12.62 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:06.02 wandboard arm-imx_v6_v7_defconfig : FAILED 2:58.95
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:11.96 arndale arm-exynos_defconfig : passed 1:34.16 arndale arm-multi_v7_defconfig : passed 1:24.11 arndale arm-multi_lpae_defconfig : passed 1:24.60 capri arm-bcm_defconfig : passed 0:48.08 capri arm-multi_v7_defconfig : passed 0:56.78 capri arm-multi_v7_nosmp_defconfig : warnings 0:50.91 chitra powerpc-pasemi_defconfig : passed 2:13.23 chitra powerpc-ppc64_defconfig : passed 2:07.73 colombus arm-sunxi_defconfig : passed 2:25.32 colombus arm-multi_v7_defconfig : passed 2:41.36 colombus arm-multi_lpae_defconfig : passed 2:30.82 cubie arm-sunxi_defconfig : passed 0:50.40 cubie arm-multi_v7_defconfig : passed 0:48.05 cubie arm-multi_v7_nosmp_defconfig : passed 0:58.88 cubie2 arm-sunxi_defconfig : passed 0:49.81 cubie2 arm-multi_v7_defconfig : passed 0:52.65 cubie2 arm-multi_lpae_defconfig : passed 0:53.80 cubie2 arm-multi_v7_nosmp_defconfig : warnings 0:56.53 cubox arm-multi_v7_defconfig : passed 1:03.43 cubox arm-mvebu_v7_defconfig : passed 1:17.30 cubox arm-multi_v7_nosmp_defconfig : passed 1:07.91 hummingboard arm-imx_v6_v7_defconfig : passed 1:28.33 hummingboard arm-multi_v7_defconfig : passed 1:21.32 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:14.81 jetsontk1 arm-tegra_defconfig : passed 1:34.97 jetsontk1 arm-multi_v7_defconfig : passed 1:33.03 jetsontk1 arm-multi_lpae_defconfig : passed 1:52.74 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:35.34 omap5uevm arm-omap2plus_defconfig : passed 1:05.11 pandaes arm-omap2plus_defconfig : warnings 1:41.94 pandaes arm-multi_v7_defconfig : passed 1:49.47 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:59.41 pi arm-exynos_defconfig : passed 3:05.85 pi arm-multi_v7_defconfig : passed 2:16.88 pi arm-multi_lpae_defconfig : passed 2:14.18 pi arm-multi_v7_nosmp_defconfig : warnings 2:10.02 pit arm-exynos_defconfig : passed 2:08.59 pit arm-multi_v7_defconfig : passed 2:12.53 pit arm-multi_lpae_defconfig : passed 2:10.57 pit arm-multi_v7_nosmp_defconfig : warnings 2:10.12 seattle arm64-defconfig : warnings 2:14.45 snow arm-exynos_defconfig : passed 2:06.12 snow arm-multi_v7_defconfig : passed 2:10.27 snow arm-multi_lpae_defconfig : passed 1:58.71 trimslice arm-tegra_defconfig : passed 1:33.94 trimslice arm-multi_v7_defconfig : passed 1:46.97 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:40.08 wandboard arm-multi_v7_defconfig : passed 1:08.42 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:08.26
Offline boards:
colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:18.27 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:16.20 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:25.84 dalmore arm-multi_v7_nosmp_defconfig : OFFLINE 2:18.11 parallella arm-multi_v7_defconfig : OFFLINE 2:35.04 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:17.41 rk3288evb arm-multi_v7_defconfig : OFFLINE 1:04.41 rk3288evb arm-multi_lpae_defconfig : OFFLINE 1:02.55 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:44.27 sama5 arm-sama5_defconfig : OFFLINE 2:17.97 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:22.54 socfpga arm-socfpga_defconfig : OFFLINE 2:29.67 socfpga arm-multi_v7_defconfig : OFFLINE 2:22.71 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.17
Board legend is available at http://arm-soc.lixom.net/boards.html
Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 2.085946] [c1038dc0] *pgd=4100041e(bad) [ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 2.101743] Modules linked in: [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 520192 [ 0.000000] free_area_init_node: node 0, pgdat c10fd420, node_mem_map eeff7000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 192512 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:31 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xd4/0x130 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-rc5-00221-g1b46bac #1 [ 0.000000] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 0.000000] [<c030e900>] (unwind_backtrace) from [<c030b474>] (show_stack+0x10/0x14) [ 0.000000] [<c030b474>] (show_stack) from [<c0335db0>] (__warn+0xe4/0xfc) [ 0.000000] [<c0335db0>] (__warn) from [<c0335e00>] (warn_slowpath_fmt+0x38/0x48) [ 0.000000] [<c0335e00>] (warn_slowpath_fmt) from [<c0f040e8>] (arm_dt_init_cpu_maps+0xd4/0x130) [ 0.000000] [<c0f040e8>] (arm_dt_init_cpu_maps) from [<c0f03424>] (setup_arch+0x7b8/0x8ec) [ 0.000000] [<c0f03424>] (setup_arch) from [<c0f00944>] (start_kernel+0x68/0x370) [ 0.000000] [<c0f00944>] (start_kernel) from [<40208078>] (0x40208078) [ 0.000000] ---[ end trace cb88537fdc8fa200 ]--- [ 0.000000] CPU: All CPU(s) started in HYP mode. [ 0.000000] CPU: Virtualization extensions available. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0
[PYBOOT] [arndale 02:22]: Timed out waiting for "<type 'str'>":
[PYBOOT] [arndale 02:23]: got exception: timeout ~$off
[PYBOOT] [arndale 02:24]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.625926] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.636207] ledtrig-cpu: registered to indicate activity on CPUs [ 1.643287] usbcore: registered new interface driver usbhid [ 1.649210] usbhid: USB HID core driver [ 1.661263] NET: Registered protocol family 10 [ 1.667837] sit: IPv6 over IPv4 tunneling driver [ 1.673949] NET: Registered protocol family 17 [ 1.678711] can: controller area network core (rev 20120528 abi 9) [ 1.685345] NET: Registered protocol family 29 [ 1.690063] can: raw protocol (rev 20120528) [ 1.694578] can: broadcast manager protocol (rev 20120528 t) [ 1.700573] can: netlink gateway (rev 20130117) max_hops=1 [ 1.707316] Key type dns_resolver registered [ 1.712209] omap_voltage_late_init: Voltage driver support not added [ 1.720491] ThumbEE CPU extension supported. [ 1.725125] Registering SWP/SWPB emulation handler [ 1.767475] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.774009] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.781766] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.790454] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.798381] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.806209] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.814027] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.821378] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.830081] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.838011] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.847747] mmc1: new high speed MMC card at address 0001 [ 1.854982] hctosys: unable to open rtc device (rtc0) [ 1.868100] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.874126] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.881129] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.889965] mmcblk1: p1 p2 [ 1.895682] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.314614] sdhci: Secure Digital Host Controller Interface driver [ 1.321138] sdhci: Copyright(c) Pierre Ossman [ 1.326941] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.390108] Synopsys Designware Multimedia Card Interface Driver [ 1.397486] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.406687] ledtrig-cpu: registered to indicate activity on CPUs [ 1.413424] usbcore: registered new interface driver usbhid [ 1.419301] usbhid: USB HID core driver [ 1.428797] NET: Registered protocol family 10 [ 1.435262] sit: IPv6 over IPv4 tunneling driver [ 1.441111] NET: Registered protocol family 17 [ 1.445857] can: controller area network core (rev 20120528 abi 9) [ 1.452454] NET: Registered protocol family 29 [ 1.457152] can: raw protocol (rev 20120528) [ 1.461667] can: broadcast manager protocol (rev 20120528 t) [ 1.467642] can: netlink gateway (rev 20130117) max_hops=1 [ 1.474154] Key type dns_resolver registered [ 1.479018] omap_voltage_late_init: Voltage driver support not added [ 1.486815] ThumbEE CPU extension supported. [ 1.499426] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.506994] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.515067] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.522814] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.530516] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.538203] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.545503] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.553186] hctosys: unable to open rtc device (rtc0) [ 1.563979] Waiting for root device /dev/mmcblk0p2... [ 1.599373] mmc1: new high speed MMC card at address 0001 [ 1.605840] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.610914] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.617402] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.625828] mmcblk1: p1 p2
[PYBOOT] [bbb 02:10]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 02:11]: got exception: timeout ~$off
[PYBOOT] [bbb 02:12]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.053433] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.059560] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.065895] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.072779] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.082388] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.091901] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.098928] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.142182] ledtrig-cpu: registered to indicate activity on CPUs [ 2.150886] oprofile: using arm/armv7 [ 2.156037] Initializing XFRM netlink socket [ 2.161135] NET: Registered protocol family 10 [ 2.172019] sit: IPv6 over IPv4 tunneling driver [ 2.180793] NET: Registered protocol family 17 [ 2.185740] NET: Registered protocol family 15 [ 2.191053] Key type dns_resolver registered [ 2.195925] omap_voltage_late_init: Voltage driver support not added [ 2.202665] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.211143] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.221571] ThumbEE CPU extension supported. [ 2.226116] Registering SWP/SWPB emulation handler [ 2.231155] SmartReflex Class3 initialized [ 2.300662] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.308002] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.318570] mmc1: new high speed MMC card at address 0001 [ 2.330694] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.339031] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.346845] hctosys: unable to open rtc device (rtc0) [ 2.352308] sr_init: No PMIC hook to init smartreflex [ 2.357979] sr_init: platform driver register failed for SR [ 2.398306] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.406310] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.420553] mmcblk1: p1 p2 [ 2.437962] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.722440] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.729514] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.755645] rtc-ds1307 2-006f: SET TIME! [ 1.761378] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.768121] rtc-ds1307 2-006f: 64 bytes nvram [ 1.772727] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.780913] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.786685] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.794923] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.804084] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.810954] hub 1-0:1.0: USB hub found [ 1.814903] hub 1-0:1.0: 1 port detected [ 1.819306] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.825077] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.833174] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.842191] hub 2-0:1.0: USB hub found [ 1.846160] hub 2-0:1.0: 1 port detected [ 1.852185] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.886226] vdd_3v3: supplied by regen1 [ 1.924366] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.942304] aic_dvdd_fixed: disabling [ 1.947061] Waiting for root device /dev/mmcblk0p1... [ 1.974220] mmc1: new high speed MMC card at address 0001 [ 1.980197] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.985066] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.991403] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.998285] mmcblk1: p1 [ 2.125130] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.160155] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.185319] hub 2-1:1.0: USB hub found [ 2.189284] hub 2-1:1.0: 4 ports detected [ 2.281316] hub 1-1:1.0: USB hub found [ 2.285301] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:46]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.722352] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.729417] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.755672] rtc-ds1307 2-006f: SET TIME! [ 1.761403] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.768136] rtc-ds1307 2-006f: 64 bytes nvram [ 1.772743] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.780922] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.786694] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.794927] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.804073] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.810933] hub 1-0:1.0: USB hub found [ 1.814876] hub 1-0:1.0: 1 port detected [ 1.819275] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.825035] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.833127] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.842137] hub 2-0:1.0: USB hub found [ 1.846097] hub 2-0:1.0: 1 port detected [ 1.852119] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.886273] vdd_3v3: supplied by regen1 [ 1.924417] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.942340] aic_dvdd_fixed: disabling [ 1.947089] Waiting for root device /dev/mmcblk0p1... [ 1.974270] mmc1: new high speed MMC card at address 0001 [ 1.980248] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.985119] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.991456] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.998337] mmcblk1: p1 [ 2.125174] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.160201] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.185257] hub 2-1:1.0: USB hub found [ 2.189242] hub 2-1:1.0: 4 ports detected [ 2.281269] hub 1-1:1.0: USB hub found [ 2.285248] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.594801] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.601855] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.627227] rtc-ds1307 2-006f: SET TIME! [ 1.632843] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.639548] rtc-ds1307 2-006f: 64 bytes nvram [ 1.644136] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.651504] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.657271] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.665477] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.674619] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.681340] hub 1-0:1.0: USB hub found [ 1.685293] hub 1-0:1.0: 1 port detected [ 1.689607] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.695375] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.703458] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.712325] hub 2-0:1.0: USB hub found [ 1.716264] hub 2-0:1.0: 1 port detected [ 1.721532] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.757445] vdd_3v3: supplied by regen1 [ 1.788554] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.801530] aic_dvdd_fixed: disabling [ 1.806913] Waiting for root device /dev/mmcblk0p1... [ 1.853763] mmc1: new high speed MMC card at address 0001 [ 1.859630] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.864459] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.870757] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.877541] mmcblk1: p1 [ 1.996765] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.026788] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.055560] hub 2-1:1.0: USB hub found [ 2.059539] hub 2-1:1.0: 4 ports detected [ 2.151564] hub 1-1:1.0: USB hub found [ 2.155533] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:54]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:55]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.174827] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.181705] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.192103] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.196966] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.203285] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.210129] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.219718] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.229217] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.236277] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.283487] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.289783] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.296651] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.306250] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.315748] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.322796] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.328913] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.335226] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.342069] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.351657] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.361161] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.368208] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.374882] vdd_3v3: supplied by regen1 [ 2.413636] hctosys: unable to open rtc device (rtc0) [ 2.418936] sr_init: No PMIC hook to init smartreflex [ 2.424439] sr_init: platform driver register failed for SR [ 2.465256] mmc1: new high speed MMC card at address 0001 [ 2.471757] aic_dvdd_fixed: disabling [ 2.473195] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.473854] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.474534] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.476958] mmcblk1: p1 [ 2.495851] ldousb: disabling [ 2.501806] Waiting for root device /dev/mmcblk0p1...
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.173429] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.179013] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.186110] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.196109] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.205525] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.211029] vdd_1v8_gen: supplied by vdd_5v_in [ 3.218057] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.224676] [drm] No driver support for vblank timestamp query. [ 3.230613] drm drm: No connectors reported connected with modes [ 3.236620] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.262497] Console: switching to colour frame buffer device 128x48 [ 3.274819] drm drm: fb0: frame buffer device [ 3.293386] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.302003] usb3_vbus: supplied by vdd_5v_in [ 3.308436] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.314893] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.320302] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.328135] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.343398] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.350241] hub 1-0:1.0: USB hub found [ 3.354014] hub 1-0:1.0: 1 port detected [ 3.358926] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.364335] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.372070] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.383391] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.390144] hub 2-0:1.0: USB hub found [ 3.393911] hub 2-0:1.0: 1 port detected [ 3.403017] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.416700] vdd_sata,avdd_plle: disabling [ 3.421521] usb1_vbus: disabling [ 3.425660] Waiting for root device /dev/mmcblk0p1... [ 3.703397] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.641911] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:46]: got exception: timeout ~$off
[PYBOOT] [beaver 01:47]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 3.122756] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.128338] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.134952] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.144943] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.154107] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.159584] vdd_1v8_gen: supplied by vdd_5v_in [ 3.165262] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.171872] [drm] No driver support for vblank timestamp query. [ 3.177800] drm drm: No connectors reported connected with modes [ 3.183803] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.203169] Console: switching to colour frame buffer device 128x48 [ 3.214953] drm drm: fb0: frame buffer device [ 3.219389] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.227289] usb3_vbus: supplied by vdd_5v_in [ 3.233541] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.239989] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.245393] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.253112] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.267844] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.274208] hub 1-0:1.0: USB hub found [ 3.277972] hub 1-0:1.0: 1 port detected [ 3.282621] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.288029] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.295688] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.307840] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.314117] hub 2-0:1.0: USB hub found [ 3.317875] hub 2-0:1.0: 1 port detected [ 3.325386] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.338486] vdd_sata,avdd_plle: disabling [ 3.342876] usb1_vbus: disabling [ 3.346807] Waiting for root device /dev/mmcblk0p1... [ 3.627846] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.566389] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:46]: got exception: timeout ~$off
[PYBOOT] [beaver 01:48]: Done. Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 3.443996] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.453996] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.462866] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.468389] vdd_1v8_gen: supplied by vdd_5v_in [ 3.476895] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.483536] [drm] No driver support for vblank timestamp query. [ 3.489539] drm drm: No connectors reported connected with modes [ 3.495562] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.522856] Console: switching to colour frame buffer device 128x48 [ 3.534666] drm drm: fb0: frame buffer device [ 3.560887] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.568396] usb3_vbus: supplied by vdd_5v_in [ 3.574494] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.580960] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.586381] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.594374] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.610888] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.619001] hub 1-0:1.0: USB hub found [ 3.622800] hub 1-0:1.0: 1 port detected [ 3.627607] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.633047] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.640968] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.660874] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.668832] hub 2-0:1.0: USB hub found [ 3.672615] hub 2-0:1.0: 1 port detected [ 3.681539] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.700246] vdd_sata,avdd_plle: disabling [ 3.705111] usb1_vbus: disabling [ 3.708538] ALSA device list: [ 3.711549] #0: NVIDIA Tegra Beaver [ 3.715744] Waiting for root device /dev/mmcblk0p1... [ 3.990881] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.993482] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:42]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:43]: got exception: timeout ~$off
[PYBOOT] [beaver 01:44]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Synthesizing the initial hotplug events...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 41.675454] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 41.689808] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 85.340708] random: dd urandom read with 58 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 89.758390] eth0: device MAC address 8e:8c:66:dd:ac:a7 [ 89.913644] RX IPC Checksum Offload disabled [ 89.918267] No MAC Management Counters available [ 89.924036] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/8e:8c:66:dd:ac:a7 Sending on LPF/eth0/8e:8c:66:dd:ac:a7 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 17 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 17
[PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 03:18]: got exception: timeout ~$off
[PYBOOT] [colombus 03:19]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.494086] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.568328] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.578658] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.652845] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.663173] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.737422] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.747748] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.821934] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.832288] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.906831] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.917162] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.991357] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 39.001688] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.075962] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.086365] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.160562] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.170882] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.245127] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.255455] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.329690] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.340015] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.414257] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.424579] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.498813] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.509142] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.583328] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.593650] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.667887] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.678213] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.752406] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.762732] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.836976] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.847303] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.083411] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.157393] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.167471] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.241451] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.251530] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.325510] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.335591] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.409578] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.419660] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.493647] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.503728] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.577713] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.587782] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.661770] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.671845] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.745831] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.755903] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.829890] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.839962] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.913946] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.924022] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.998007] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.008084] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.082064] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.092142] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.166190] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.176252] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.250236] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.260315] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.334299] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.344375] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.418360] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.428443] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:03]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:05]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 13.877679] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 17.951598] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 17.961653] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.035572] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.045635] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.119560] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.129616] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.203532] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.213591] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.287511] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.297573] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.371547] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.381591] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.455522] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.465588] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.539506] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.549555] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.623469] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.633520] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.707435] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.717493] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.791411] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.801466] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.875400] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.885456] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 66.959368] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 66.969421] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.043342] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.053394] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.127318] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.137377] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.211293] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.221350] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:08]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:09]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.496356] Key type dns_resolver registered [ 2.502771] ThumbEE CPU extension supported. [ 2.507193] Registering SWP/SWPB emulation handler [ 2.559662] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.565890] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.573856] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.588295] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.595182] [drm] No driver support for vblank timestamp query. [ 2.608754] mmc1: new high speed MMC card at address 0001 [ 2.617656] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.624180] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.632383] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.640732] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.650793] mmcblk1: p1 [ 2.774421] Console: switching to colour frame buffer device 240x75 [ 2.861801] drm drm: fb0: frame buffer device [ 2.880688] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.890782] usb2_vbus: supplied by vdd-sys-5v0 [ 2.901401] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.906996] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.915906] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.930704] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.941043] hub 1-0:1.0: USB hub found [ 2.945126] hub 1-0:1.0: 1 port detected [ 2.955147] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.969121] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.031116] dvdd_ts: disabling [ 3.034216] usb1_vbus: disabling [ 3.037571] vdd_cam_1v8_reg: disabling [ 3.045242] Waiting for root device /dev/mmcblk0p1... [ 3.255708] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.218953] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 61.010665] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:55]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:56]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.502457] Key type dns_resolver registered [ 2.508856] ThumbEE CPU extension supported. [ 2.513294] Registering SWP/SWPB emulation handler [ 2.539524] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.546411] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.557971] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.572357] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.579113] [drm] No driver support for vblank timestamp query. [ 2.600055] mmc1: new high speed MMC card at address 0001 [ 2.610329] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.617561] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.626213] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.633363] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.643891] mmcblk1: p1 [ 2.759756] Console: switching to colour frame buffer device 240x75 [ 2.847442] drm drm: fb0: frame buffer device [ 2.864767] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.874826] usb2_vbus: supplied by vdd-sys-5v0 [ 2.886428] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.892022] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.900768] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.914780] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.925088] hub 1-0:1.0: USB hub found [ 2.929087] hub 1-0:1.0: 1 port detected [ 2.939661] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.953954] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.016043] dvdd_ts: disabling [ 3.019145] usb1_vbus: disabling [ 3.022515] vdd_cam_1v8_reg: disabling [ 3.030190] Waiting for root device /dev/mmcblk0p1... [ 3.244775] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.222238] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 65.090652] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:56]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:57]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 2.668349] Bluetooth: RFCOMM ver 1.11 [ 2.672293] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.677692] Bluetooth: BNEP socket layer initialized [ 2.682781] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.688782] Bluetooth: HIDP socket layer initialized [ 2.695780] Key type dns_resolver registered [ 2.705357] Registering SWP/SWPB emulation handler [ 2.735732] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.742041] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.749792] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.774795] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.781594] [drm] No driver support for vblank timestamp query. [ 2.959434] Console: switching to colour frame buffer device 240x75 [ 3.045648] drm drm: fb0: frame buffer device [ 3.070992] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.078279] usb2_vbus: supplied by vdd-sys-5v0 [ 3.086701] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.092514] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.101731] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.120997] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.135123] hub 1-0:1.0: USB hub found [ 3.139082] hub 1-0:1.0: 1 port detected [ 3.153207] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.168722] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.263789] dvdd_ts: disabling [ 3.266893] usb1_vbus: disabling [ 3.270154] vdd_cam_1v8_reg: disabling [ 3.274946] ALSA device list: [ 3.277939] #0: NVIDIA Tegra Dalmore [ 3.283963] Waiting for root device /dev/mmcblk0p1... [ 3.460979] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.484682] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.593188] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:46]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:47]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.650465] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo [ 1.658025] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.666933] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.698069] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.699334] usbcore: registered new interface driver usbhid [ 1.704484] usbhid: USB HID core driver [ 1.713301] NET: Registered protocol family 10 [ 1.713921] sit: IPv6 over IPv4 tunneling driver [ 1.717151] NET: Registered protocol family 17 [ 1.721172] NET: Registered protocol family 15 [ 1.725623] Key type dns_resolver registered [ 1.729950] Registering SWP/SWPB emulation handler [ 1.735812] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.740365] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.766783] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.768586] max98090 1-0010: MAX98090 REVID=0x43 [ 1.770807] max98090 1-0010: use default 2.8v micbias [ 1.780773] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.790585] mmc1: new DDR MMC card at address 0001 [ 1.793939] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.797018] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.813573] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.813853] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.818598] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.824510] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.831068] mmcblk1: p1 p2 [ 1.840943] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.861048] VDD10_HDMI_1.0V: disabling [ 1.861742] vdd_g3d: disabling [ 1.862811] BUCK8_2.8V: disabling [ 1.866813] ALSA device list: [ 1.868456] #0: Odroid-U3 [ 1.872096] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:57]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:58]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 3.412359] [<c0301318>] (do_DataAbort) from [<c030c5e0>] (__dabt_svc+0x40/0x60) [ 3.420104] Exception stack(0xee087c10 to 0xee087c58) [ 3.425394] 7c00: d969aafd d969aafd ddcde300 d969ab01 [ 3.433959] 7c20: d969aafd d969aafd c140e1b3 00000001 c144feb8 c13c1670 00000000 00000000 [ 3.442516] 7c40: ee6f7380 ee087c60 c046dae0 c046db28 60000013 ffffffff [ 3.449442] [<c030c5e0>] (__dabt_svc) from [<c046db28>] (kernfs_activate+0x78/0xf0) [ 3.457463] [<c046db28>] (kernfs_activate) from [<c046dca0>] (kernfs_add_one+0x100/0x158) [ 3.466023] [<c046dca0>] (kernfs_add_one) from [<c046f22c>] (__kernfs_create_file+0x6c/0x90) [ 3.474870] [<c046f22c>] (__kernfs_create_file) from [<c046f9dc>] (sysfs_add_file_mode_ns+0xac/0x194) [ 3.484534] [<c046f9dc>] (sysfs_add_file_mode_ns) from [<c046fc70>] (sysfs_add_file+0x18/0x20) [ 3.493551] [<c046fc70>] (sysfs_add_file) from [<c04706b8>] (sysfs_merge_group+0x50/0xb8) [ 3.502116] [<c04706b8>] (sysfs_merge_group) from [<c0780438>] (dpm_sysfs_add+0x70/0xd0) [ 3.510593] [<c0780438>] (dpm_sysfs_add) from [<c0776aac>] (device_add+0x394/0x56c) [ 3.518609] [<c0776aac>] (device_add) from [<c0980038>] (__thermal_cooling_device_register+0x11c/0x35c) [ 3.528456] [<c0980038>] (__thermal_cooling_device_register) from [<c0982970>] (__cpufreq_cooling_register+0x3b0/0x56c) [ 3.539748] [<c0982970>] (__cpufreq_cooling_register) from [<c0995474>] (cpufreq_ready+0x70/0xb8) [ 3.549045] [<c0995474>] (cpufreq_ready) from [<c0993114>] (cpufreq_online+0x404/0x6f0) [ 3.557425] [<c0993114>] (cpufreq_online) from [<c0777b20>] (subsys_interface_register+0x94/0xd8) [ 3.566719] [<c0777b20>] (subsys_interface_register) from [<c0991df8>] (cpufreq_register_driver+0x12c/0x198) [ 3.577021] [<c0991df8>] (cpufreq_register_driver) from [<c0995874>] (dt_cpufreq_probe+0x70/0xec) [ 3.586312] [<c0995874>] (dt_cpufreq_probe) from [<c077accc>] (platform_drv_probe+0x4c/0xb0) [ 3.595159] [<c077accc>] (platform_drv_probe) from [<c07793f4>] (driver_probe_device+0x214/0x2c0) [ 3.604453] [<c07793f4>] (driver_probe_device) from [<c07777fc>] (bus_for_each_drv+0x64/0x98) [ 3.613383] [<c07777fc>] (bus_for_each_drv) from [<c0779104>] (__device_attach+0xb0/0x110) [ 3.622041] [<c0779104>] (__device_attach) from [<c0778740>] (bus_probe_device+0x84/0x8c) [ 3.630603] [<c0778740>] (bus_probe_device) from [<c0778bd0>] (deferred_probe_work_func+0x68/0x98) [ 3.639989] [<c0778bd0>] (deferred_probe_work_func) from [<c0357884>] (process_one_work+0x138/0x348) [ 3.649557] [<c0357884>] (process_one_work) from [<c0357acc>] (worker_thread+0x38/0x510) [ 3.658030] [<c0357acc>] (worker_thread) from [<c035cd74>] (kthread+0xdc/0xf4) [ 3.665599] [<c035cd74>] (kthread) from [<c0307eb8>] (ret_from_fork+0x14/0x3c) [ 3.673155] Code: e083310c e0431101 eaffff8f e59032f8 (e5130014) [ 3.679533] ---[ end trace 1779f2f91ed5736e ]--- [ 3.684368] Fixing recursive fault but reboot is needed!
[PYBOOT] [omap5uevm 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:07]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:08]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
#1[ [ 2. 6 012.86003]1 8P0C3 ]i sPC ati s ktahtr ketahdr_edaatd_ad+0atxa4/+00xx4c/0 xsck. ti:[ ee 20.8660001800 7][ p c : 2.[6<c01083510d]3 4p0>c] : [< clr0 35:d 3[4<c0>03] 58 7 bl0r> :[ 3 0 0 2 .r86 0:18 1e2e0]6 drd1608: c1r3:0 220609040 1 r993 : [ c 1 2 02a3.0600 18 r180] : s pe e:0 6eded06887b 98[ i p 2:. 600108010400]0 r1 7 :f p c1:2 e0ea300807 b9 r46 :[ 00 0 020.026001 8 1r71 ]: r30 0:0 000000000 0 0r000 : r 2e e:0 60da0040000 20[ o n M2o.6d0e1 S81VC9_] 3F2 l aIgSsA: AnzRMCv S eIgRQmes o[T a b l e2.:6 0810822014]0 6Cao n DtArCol:: 0 1000c005035817d R MT a bSleeg:m e80n2t0 4n0o6nae DA[m it =2. 060x1e8e2083][ St a c2k.: 6(001x8b2600] 0Setea0c87k:b 9(80 xtob0 00x0eeee008878b09008) to m i0tx ee= 080x8e0e000)86 22[0 [ 2 . 6 0218.6330]1 873b3a] 07:b eae0:06 edea4060 dae4e007 4ebe40074 bee400 6edea0460d ae4e00 6edea4006 d0a40000 000000000 0000000 00000000 00c00b04 cf05b84cf 25d8dcc 32d00d0c30 00[ [ 2 . 6 021.86401]18 47b1e]0 :7b eee00:8 7ebe0f48 7cbf0b44 fc50b84cf 5048c20 804026c08 0e6ec0 6deae0406d ae4e006 ece00060c 0c0030 4c4083b444 e8eb048 e7be0f887 befe80 87eeb0f887 bf8[ [ 2 . 60 21.84609]1 847c9]2 0:7c 2000:0 0000006040 0c60340 cbf0430cb fe4ec08 6ee220806 2020000 000000b00 c001b3 0c7c1340c 7ce4ec0 86e0e00086 000000 0000000000 0000000 000000040 00[4 [2 . 6 021.86570]1 8577c6]0 :7 c06000: 00000060c0 0c06cc 3c2054c382 504008 000000000 00c0003 8c30c3c48 3cc0cf4 9cb107f09 b1e7e008 7ece0984 7cee9244 e8ee20c4 80e00c0 0000006c00 06c[ [ 2 . 6 012.86660]1 876c6a]0 7:c a000:00 0000600c 00c603c1 7c0c3¡1c7 c0¡00c 0100000001 000000 000000000 0c000c0 0cde0c980 dee9e682 e5dee62c5 0d0e0c 0000000000 000000 0000000000 00[0 [ 2. 6 0128.7605]18 775c]e 0:7c e0000: 0000060c0 0e0e6c08 e7ed90887 ede968 f1ebe61f01 cb01c03 c250c4382 050408 000000000 00c00300 1c0353001 305000 000000040 00e0e4ff feedf94ffd 9[4 [ 2. 6 0 128.8630]18 87d32]0 :7 d2000:00 000000000 0e0e307 e0ea3170 0eae160f 6e4e63f1 6e4e3137 e0ae43070 ae4e60 fe6e36df0 6c30d50d 1c9055d81 9ee568f 6e3ed6f0 603d0000 0000000000 0[0 [2 . 6 0 12.86903]1 89U3na] bUlen atblo eh tano dlhae nkdelren ekle rpnaelg ipnga grinegq ureestqu aestt viartt uvailrt uaaddlr aedssd r3es8s33 b3f8e33eb fce e0 000[ 00 20 2 .8[32 0 6 12]. K8e3r2n06e1l] p aKnericne l- p[a ] * p g2d.=800000000ng: Attempted to kill the idle task!
[ 3.818702] SMP: failed to stop secondary CPUs [ 3.823537] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!
[PYBOOT] [omap5uevm 00:48]: got exception: panic ~$off
[PYBOOT] [omap5uevm 00:49]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 48.010326] 3800: c034d87a c0360990 ee4f2000 c1007760 ee4f39d8 0000000b 0000000b 00000001 [ 48.010329] 3820: ee4f3834 c0a8af64 ee481540 ee481540 c034d87a c0337480 c0d47258 c039a054 [ 48.010333] 3840: 00000003 c1101204 c1007760 ee4f39d8 60000193 0000000b 00000001 c1007760 [ 48.010336] 3860: c034d87a c030b7e8 ee4f2218 0000000b 00000000 00000008 ee4f2000 bf000000 [ 48.010339] 3880: 65000000 39666662 20363438 30613165 36303030 62386520 37303864 35652030 [ 48.010343] 38a0: 32333039 28203030 33313565 30313030 c0002029 ee4f38d4 00080000 fffffff0 [ 48.010347] 38c0: 00000037 ee4f39d8 00000000 00000037 fffffff0 c1007760 ee4f3a5c c031a0f8 [ 48.010350] 38e0: fffffff0 c03156e8 00000000 ffffffff 00000000 c1125a94 c0d47137 ee4f39ec [ 48.010353] 3900: c1125a99 c0d4713b ee4f39f0 c1125abd 0000003c c10080a4 00000037 c031537c [ 48.010357] 3920: fffffff0 ee4f39d8 00000001 c1007760 ee4f3a5c c0301238 00000000 00000000 [ 48.010360] 3940: 00000000 ffffffff c1125ac4 c1125e74 c0301238 c0551308 00000000 00000030 [ 48.010364] 3960: 00000010 00000010 00000000 00000000 00000000 ffffffff 00000000 c0d58848 [ 48.010367] 3980: ee4f3a64 c1125e74 c0d58877 c1125a94 0000003c c110934c 0000002c 00000000 [ 48.010370] 39a0: 00000000 00000000 c1103150 c035e550 00000000 00000000 00000001 00000006 [ 48.010374] 39c0: c034d878 20000193 ffffffff ee4f3a0c c0a8af64 c030bea0 ee482200 ee482200 [ 48.010377] 39e0: ffffffff 00000000 00000000 ee482200 c1035a18 ee48242c c0a8af64 00000001 [ 48.010381] 3a00: c1007760 ee4f3a5c ee483338 ee4f3a28 c0349540 c034d878 20000193 ffffffff [ 48.010384] 3a20: 00000051 ee48242c 00000020 c0a8ad80 00000001 c1007760 c034d87a c0360990 [ 48.010388] 3a40: ee4f2000 c1007760 ee4f3c10 0000000b 0000000b 00000001 ee4f3a6c c0a8af64 [ 48.010391] 3a60: ee481540 ee481540 c034d87a c0337480 c0d47258 c039a054 00000003 c1101204 [ 48.010394] 3a80: c1007760 ee4f3c10 60000193 0000000b 00000001 c1007760 c034d87a c030b7e8 [ 48.010398] 3aa0: ee4f2218 0000000b 00000000 00000008 ee4f2000 bf000000 65000000 39666662 [ 48.010402] 3ac0: 20363438 30613165 36303030 62386520 37303864 35652030 32333039 28203030 [ 48.010405] 3ae0: 33313565 30313030 c0002029 ee4f3b0c 00080000 fffffff0 00000037 ee4f3c10 [ 48.010408] 3b00: 00000000 00000037 fffffff0 c1007760 ee4f3c94 c031a0f8 fffffff0 c03156e8 [ 48.010412] 3b20: 00000000 ffffffff 00000000 c1125a96 33666530 65653466 00000010 00000008 [ 48.010415] 3b40: 00000000 00000000 00000000 c10080a4 00000037 c031537c fffffff0 ee4f3c10 [ 48.010419] 3b60: 00000001 c1007760 ee4f3c94 c0301238 00000000 00000000 00000000 ffffffff [ 48.010422] 3b80: c1125ac4 c1125e74 c0301238 c0551308 00000000 00000030 00000010 00000010 [ 48.010426] 3ba0: 00000000 00000000 00000000 ffffffff 00000000 c0d58848 ee4f3c9c c1125e74 [ 48.010429] 3bc0: c0d58877 c1125a94 0000003c c1107b98 0000002c 00000000 00000000 00000000 [ 48.010432] 3be0: c1103150 c035e550 00000000 00000000 00000001 00000006 c034d878 20000193 [ 48.010436] 3c00: ffffffff ee4f3c44 c0a8af64 c030bea0 ee482200 ee482200 ffffffff 00000000 [ 48.010439] 3c20: 00000000 ee482200 c1035a18 ee48242c c0a8af64 00000001 c1007760 ee4f3c94 [ 48.010443] 3c40: ee483338 ee4f3c60 c0349540 c034d878 20000193 ffffffff 00000051 ee48242c [ 48.010446] 3c60: 00000020 c0a8ad80 00000001 [PYBOOT] [omap5uevm 01:38]: got exception: panic ~$off
[PYBOOT] [omap5uevm 01:39]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.651463] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.665900] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.672412] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.677874] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.685799] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.728198] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.728764] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.729969] hub 3-0:1.0: USB hub found [ 1.730032] hub 3-0:1.0: 1 port detected [ 1.747936] mmc2: switch to bus width 8 failed [ 1.754094] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.755890] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.758877] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.766662] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.777301] [drm] No driver support for vblank timestamp query. [ 1.783374] mmc2: switch to bus width 4 failed [ 1.787137] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.792948] mmc0: new SDIO card at address 0001 [ 1.797900] mmc2: new high speed MMC card at address 0001 [ 1.804035] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.808923] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.818913] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.826967] mmcblk2: p3 [ 1.908858] Console: switching to colour frame buffer device 170x48 [ 1.937625] drm drm: fb0: frame buffer device [ 1.953786] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.961207] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.968277] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.982602] vdd_1v5: disabling [ 1.985686] vdd_1v2: disabling [ 2.603428] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.614822] Waiting for root device /dev/mmcblk0p3... [ 59.098121] random: nonblocking pool is initialized
[PYBOOT] [seaboard 02:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 02:01]: got exception: timeout ~$off
[PYBOOT] [seaboard 02:02]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.612177] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.618511] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.628449] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.634896] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.640308] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.648066] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.663235] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.669715] hub 3-0:1.0: USB hub found [ 1.673522] hub 3-0:1.0: 1 port detected [ 1.683961] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.690591] [drm] No driver support for vblank timestamp query. [ 1.716243] mmc2: switch to bus width 8 failed [ 1.721360] mmc2: switch to bus width 4 failed [ 1.721370] mmc2: new high speed MMC card at address 0001 [ 1.721710] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.721822] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.721942] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.723051] mmcblk2: p3 [ 1.726631] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.734218] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.736945] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.743924] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.762106] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.765204] mmc0: new SDIO card at address 0001 [ 1.785413] Console: switching to colour frame buffer device 170x48 [ 1.863447] drm drm: fb0: frame buffer device [ 1.867879] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.874267] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.881146] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.892793] vdd_1v5: disabling [ 1.895857] vdd_1v2: disabling [ 2.542458] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.553315] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:48]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:49]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 1.639002] Bluetooth: BNEP socket layer initialized [ 1.644049] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.650085] Bluetooth: HIDP socket layer initialized [ 1.655808] Key type dns_resolver registered [ 1.660133] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.670546] mmc0: new SDIO card at address 0001 [ 1.678009] Registering SWP/SWPB emulation handler [ 1.693234] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.699954] VDDIO_HDMI: supplied by vdd_5v0 [ 1.704468] vdd_sys: supplied by vdd_5v0 [ 1.708476] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.713505] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.720084] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.730222] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.736674] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.742115] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.750005] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.770061] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.777927] hub 3-0:1.0: USB hub found [ 1.781747] hub 3-0:1.0: 1 port detected [ 1.791948] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.798564] [drm] No driver support for vblank timestamp query. [ 1.883081] Console: switching to colour frame buffer device 170x48 [ 1.900600] drm drm: fb0: frame buffer device [ 1.930064] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.937044] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 1.944492] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.962617] vdd_1v5: disabling [ 1.965669] vdd_1v2: disabling [ 1.968841] ALSA device list: [ 1.971822] #0: NVIDIA Tegra Seaboard [ 2.307742] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.318838] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:47]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:48]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 3.138711] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended [ 3.147070] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 4.198005] random: dd urandom read with 58 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
Cannot find device "eth0" Bind socket to interface: No such device Failed to bring up eth0. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting system message bus: dbus[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone (none). [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
[PYBOOT] [snow 03:10]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snow 03:11]: got exception: timeout ~$off
[PYBOOT] [snow 03:12]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.970428] can: controller area network core (rev 20120528 abi 9) [ 1.976745] NET: Registered protocol family 29 [ 1.981231] can: raw protocol (rev 20120528) [ 1.985534] can: broadcast manager protocol (rev 20120528 t) [ 1.991241] can: netlink gateway (rev 20130117) max_hops=1 [ 1.997558] Key type dns_resolver registered [ 2.002227] ThumbEE CPU extension supported. [ 2.006530] Registering SWP/SWPB emulation handler [ 2.019226] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.026367] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.035888] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.042938] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.049957] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.056976] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.074432] db8500-esram12: disabling [ 2.078247] db8500-esram34: disabling [ 2.082397] V-CSI/DSI: disabling [ 2.085784] mmci-reg: disabling [ 2.090881] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.096923] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.105590] Waiting for root device /dev/mmcblk0p4... [ 2.139007] mmc3: new high speed MMC card at address 0001 [ 2.145324] mmcblk3: mmc3:0001 3.53 GiB [ 2.149780] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.155609] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.161376] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.168273] mmcblk3: p1 p2 p3 p4 cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 02:09]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:10]: got exception: timeout ~$off
[PYBOOT] [snowball 02:11]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.903015] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.910522] ledtrig-cpu: registered to indicate activity on CPUs [ 1.916778] usbcore: registered new interface driver usbhid [ 1.922363] usbhid: USB HID core driver [ 1.929595] NET: Registered protocol family 10 [ 1.984924] sit: IPv6 over IPv4 tunneling driver [ 1.990081] NET: Registered protocol family 17 [ 1.994567] can: controller area network core (rev 20120528 abi 9) [ 2.000793] NET: Registered protocol family 29 [ 2.005249] can: raw protocol (rev 20120528) [ 2.009521] can: broadcast manager protocol (rev 20120528 t) [ 2.015167] can: netlink gateway (rev 20130117) max_hops=1 [ 2.021118] Key type dns_resolver registered [ 2.025573] ThumbEE CPU extension supported. [ 2.079925] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.094604] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.103698] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.110717] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.117675] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.124664] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.136413] db8500-esram12: disabling [ 2.184204] db8500-esram34: disabling [ 2.213958] V-CSI/DSI: disabling [ 2.218170] mmci-reg: disabling [ 2.229797] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.235748] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.249908] Waiting for root device /dev/mmcblk0p4... [ 3.037841] mmc3: new high speed MMC card at address 0001 [ 3.049682] mmcblk3: mmc3:0001 3.53 GiB [ 3.059814] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.069335] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.083831] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.090667] mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:04]: got exception: timeout ~$off
[PYBOOT] [snowball 02:05]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.612823] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.623718] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.639404] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.650268] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.684570] NET: Registered protocol family 10 [ 2.692504] sit: IPv6 over IPv4 tunneling driver [ 2.699462] NET: Registered protocol family 17 [ 2.704437] NET: Registered protocol family 35 [ 2.709197] NET: Registered protocol family 37 [ 2.714355] Registering SWP/SWPB emulation handler [ 2.734344] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.748229] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.758392] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.765472] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-10 23:09:06 UTC (955408146) [ 2.774688] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.781707] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.788665] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.795684] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.809295] db8500-esram12: disabling [ 2.813079] db8500-esram34: disabling [ 2.816986] V-CSI/DSI: disabling [ 2.820251] mmci-reg: disabling [ 2.823577] ALSA device list: [ 2.826538] #0: MOP500-card [ 2.829864] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.835845] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.842071] Waiting for root device /dev/mmcblk0p4... cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:55]: got exception: timeout ~$off
[PYBOOT] [snowball 01:56]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 20.159064] mmcblk0: error -110 sending status command, aborting [ 20.170091] mmcblk0: error -110 sending status command, retrying [ 20.178544] mmcblk0: error -110 sending status command, retrying [ 20.186979] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/get[ 20.198440] mmcblk0: error -110 sending status command, retrying ty" [ 20.209823] mmcblk0: error -110 sending status command, retrying [ 20.218333] mmcblk0: error -110 sending status command, aborting [ 20.229380] mmcblk0: error -110 sending status command, retrying [ 20.237802] mmcblk0: error -110 sending status command, retrying [ 20.246246] mmcblk0: error -110 sending status command, aborting [ 20.257281] mmcblk0: error -110 sending status command, retrying [ 20.265736] mmcblk0: error -110 sending status command, retrying [ 20.274167] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty"
INIT: INIT: cannot execute[ 20.292654] mmcblk0: error -110 sending status command, retrying "/sbin/getty"cannot execute "/sb[ 20.301539] mmcblk0: error -110 sending status command, retrying in/getty"
INIT: INIT: I[ 20.310405] mmcblk0: error -110 sending status command, aborting d "5" respawning too fast: disabled for 5 minutes INIT: Id "S1" respawning too fast: disabled for 5 minutes INIT: Id "1" respawning too fast: disabled for 5 minutes INIT: Id "3" respawning too fast: disabled for 5 minutes INIT: Id "6" respawning too fast: disabled for 5 minutes INIT: cannot execute "/sbin/getty" INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 47.385922] random: nonblocking pool is initialized
[PYBOOT] [wandboard 02:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 02:57]: got exception: timeout ~$off
[PYBOOT] [wandboard 02:58]: Done.