Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20160331/
Failed boards:
colombus arm-multi_v7_defconfig : FAILED 3:15.37 colombus arm-multi_lpae_defconfig : FAILED 3:10.09 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:19.52 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.31 cosmic arm-multi_v7_defconfig : FAILED 2:11.56 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:02.53 hummingboard arm-imx_v6_v7_defconfig : FAILED 1:10.44 minnowmax minnowmax_defconfig : NO BUILD pi arm-multi_v7_defconfig : FAILED 1:50.58 pi arm-multi_lpae_defconfig : FAILED 2:00.68 snow arm-exynos_defconfig : FAILED 2:09.32 snow arm-multi_v7_nosmp_defconfig : FAILED 2:10.98 snowball arm-u8500_defconfig : FAILED 3:11.11 socfpga arm-socfpga_defconfig : FAILED 1:51.31 socfpga arm-multi_v7_defconfig : FAILED 1:57.74 socfpga arm-multi_v7_nosmp_defconfig : FAILED 1:53.76
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:19.76 bbb arm-omap2plus_defconfig : passed 1:45.78 bbb arm-multi_v7_defconfig : passed 1:08.46 bbb arm-multi_v7_nosmp_defconfig : passed 1:16.91 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:48.39 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:42.05 beagleboard-x15 arm-multi_lpae_defconfig : warnings 0:43.45 beagleboard-x15 arm-multi_v7_nosmp_defconfig : warnings 0:56.71 capri arm-bcm_defconfig : passed 0:45.45 capri arm-multi_v7_defconfig : passed 1:00.16 capri arm-multi_v7_nosmp_defconfig : warnings 0:48.22 chitra powerpc-pasemi_defconfig : passed 2:12.90 chitra powerpc-ppc64_defconfig : passed 1:54.71 colibri-vf61 arm-imx_v6_v7_defconfig : warnings 1:13.89 colibri-vf61 arm-multi_v7_defconfig : passed 1:28.53 colibri-vf61 arm-multi_v7_nosmp_defconfig : passed 1:31.53 colombus arm-sunxi_defconfig : passed 2:20.60 cubie arm-sunxi_defconfig : passed 0:50.15 cubie arm-multi_v7_defconfig : passed 0:55.11 cubie arm-multi_v7_nosmp_defconfig : passed 1:00.87 cubie2 arm-sunxi_defconfig : passed 1:59.39 cubie2 arm-multi_v7_defconfig : passed 2:11.95 cubie2 arm-multi_lpae_defconfig : passed 2:04.14 cubie2 arm-multi_v7_nosmp_defconfig : warnings 2:01.12 cubox arm-multi_v7_defconfig : passed 1:18.90 cubox arm-mvebu_v7_defconfig : passed 1:10.43 cubox arm-multi_v7_nosmp_defconfig : passed 1:13.64 dalmore arm-tegra_defconfig : passed 1:23.90 dalmore arm-multi_v7_defconfig : passed 1:28.67 dalmore arm-multi_lpae_defconfig : passed 1:34.85 dalmore arm-multi_v7_nosmp_defconfig : warnings 1:26.18 hummingboard arm-multi_v7_defconfig : passed 1:17.33 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:17.12 jetsontk1 arm-tegra_defconfig : passed 1:34.66 jetsontk1 arm-multi_v7_defconfig : passed 1:34.24 jetsontk1 arm-multi_lpae_defconfig : passed 1:33.61 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:34.77 odroidu3 arm-exynos_defconfig : passed 1:00.91 pandaes arm-omap2plus_defconfig : warnings 1:42.53 pandaes arm-multi_v7_defconfig : passed 1:38.32 pandaes arm-multi_v7_nosmp_defconfig : warnings 2:01.16 parallella arm-multi_v7_defconfig : passed 2:25.60 parallella arm-multi_v7_nosmp_defconfig : warnings 1:51.15 pi arm-exynos_defconfig : passed 0:43.79 pi arm-multi_v7_nosmp_defconfig : warnings 0:43.10 pit arm-exynos_defconfig : passed 0:45.42 pit arm-multi_v7_defconfig : passed 0:47.09 pit arm-multi_lpae_defconfig : passed 0:49.59 pit arm-multi_v7_nosmp_defconfig : warnings 0:43.17 seaboard arm-tegra_defconfig : passed 1:00.86 seaboard arm-multi_v7_defconfig : passed 0:59.41 seaboard arm-multi_v7_nosmp_defconfig : warnings 1:18.26 seattle arm64-defconfig : warnings 2:17.38 snow arm-multi_v7_defconfig : passed 1:09.29 snow arm-multi_lpae_defconfig : passed 1:01.92 snowball arm-multi_v7_defconfig : passed 1:19.96 snowball arm-multi_v7_nosmp_defconfig : warnings 1:21.10 trimslice arm-multi_v7_defconfig : passed 1:39.97 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:36.43 wandboard arm-imx_v6_v7_defconfig : passed 2:19.39 wandboard arm-multi_v7_defconfig : passed 1:16.19 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:11.31
Offline boards:
arndale arm-exynos_defconfig : OFFLINE 2:24.75 arndale arm-multi_v7_defconfig : OFFLINE 2:33.78 arndale arm-multi_lpae_defconfig : OFFLINE 2:14.90 arndale arm-multi_v7_nosmp_defconfig : OFFLINE 2:12.94 beaver arm-tegra_defconfig : OFFLINE 2:14.38 beaver arm-multi_v7_defconfig : OFFLINE 2:31.01 beaver arm-multi_v7_nosmp_defconfig : OFFLINE 2:14.22 omap5uevm arm-omap2plus_defconfig : OFFLINE 1:17.46 omap5uevm arm-multi_v7_defconfig : OFFLINE 1:19.87 omap5uevm arm-multi_lpae_defconfig : OFFLINE 1:22.87 omap5uevm arm-multi_v7_nosmp_defconfig : OFFLINE 1:34.21 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:53.49 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:44.63 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:45.88 sama5 arm-sama5_defconfig : OFFLINE 2:13.93 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:19.07 trimslice arm-tegra_defconfig : OFFLINE 2:27.89
Board legend is available at http://arm-soc.lixom.net/boards.html
Board colombus-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 96.957073] random: dd urandom read with 92 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 97.775826] eth0: device MAC address 66:16:0d:7d:a1:98 [ 97.781024] libphy: PHY stmmac-0:ffffffff not found [ 97.785911] eth0: Could not attach to PHY [ 97.789931] stmmac_open: Cannot attach to PHY (error: -19) RTNETLINK answers: No such device Listening on LPF/eth0/66:16:0d:7d:a1:98 Sending on LPF/eth0/66:16:0d:7d:a1:98 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 send_packet: Network is down receive_packet failed on eth0: Network is down DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 send_packet: Network is down DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 send_packet: Network is down [ 104.679194] random: nonblocking pool is initialized DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 send_packet: Network is down DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 send_packet: Network is down DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 send_packet: Network is down DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 send_packet: Network is down
[PYBOOT] [colombus 03:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 03:08]: got exception: timeout ~$off
[PYBOOT] [colombus 03:09]: Done. Board colombus-arm-multi_v7_defconfig failure log: -------------------------------------------------
[....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 96.902621] random: dd urandom read with 62 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 97.289207] eth0: device MAC address 96:c9:7a:71:29:5f [ 97.294418] libphy: PHY stmmac-0:ffffffff not found [ 97.299306] eth0: Could not attach to PHY [ 97.303328] stmmac_open: Cannot attach to PHY (error: -19) RTNETLINK answers: No such device Listening on LPF/eth0/96:c9:7a:71:29:5f Sending on LPF/eth0/96:c9:7a:71:29:5f Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 send_packet: Network is down receive_packet failed on eth0: Network is down DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 send_packet: Network is down DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 send_packet: Network is down DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 send_packet: Network is down DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 send_packet: Network is down DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 send_packet: Network is down DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 send_packet: Network is down [ 149.247209] random: nonblocking pool is initialized
[PYBOOT] [colombus 03:12]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 03:13]: got exception: timeout ~$off
[PYBOOT] [colombus 03:14]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
For info, please visit https://www.isc.org/software/dhcp/
[ 89.755390] eth0: device MAC address 7a:31:35:37:2a:4d [ 89.760857] libphy: PHY stmmac-0:ffffffff not found [ 89.766001] eth0: Could not attach to PHY [ 89.770293] stmmac_open: Cannot attach to PHY (error: -19) RTNETLINK answers: No such device Listening on LPF/eth0/7a:31:35:37:2a:4d Sending on LPF/eth0/7a:31:35:37:2a:4d Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 send_packet: Network is down receive_packet failed on eth0: Network is down DHCPREQUEST on eth0 to 255.255.255.255 port 67 send_packet: Network is down [ 96.009423] libphy: PHY stmmac-0:ffffffff not found [ 96.014594] eth0: Could not attach to PHY [ 96.018909] stmmac_open: Cannot attach to PHY (error: -19) RTNETLINK answers: No such device DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 send_packet: Network is down DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 send_packet: Network is down DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 send_packet: Network is down DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 send_packet: Network is down DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 send_packet: Network is down DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 send_packet: Network is down DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 send_packet: Network is down
[PYBOOT] [colombus 03:16]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 03:17]: got exception: timeout ~$off
[PYBOOT] [colombus 03:19]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.624052] blk_update_request: I/O error, dev mmcblk0, sector 3633281 [ 18.698288] mmcblk0: error -110 transferring data, sector 3633282, nr 134, cmd response 0x900, card status 0x0 [ 18.708403] blk_update_request: I/O error, dev mmcblk0, sector 3633282 [ 22.782630] mmcblk0: error -110 transferring data, sector 3633283, nr 133, cmd response 0x900, card status 0x0 [ 22.792736] blk_update_request: I/O error, dev mmcblk0, sector 3633283 [ 26.866975] mmcblk0: error -110 transferring data, sector 3633284, nr 132, cmd response 0x900, card status 0x0 [ 26.877085] blk_update_request: I/O error, dev mmcblk0, sector 3633284 [ 30.951312] mmcblk0: error -110 transferring data, sector 3633285, nr 131, cmd response 0x900, card status 0x0 [ 30.961422] blk_update_request: I/O error, dev mmcblk0, sector 3633285 [ 35.035575] mmcblk0: error -110 transferring data, sector 3633286, nr 130, cmd response 0x900, card status 0x0 [ 35.045687] blk_update_request: I/O error, dev mmcblk0, sector 3633286 [ 39.120065] mmcblk0: error -110 transferring data, sector 3633287, nr 129, cmd response 0x900, card status 0x0 [ 39.130168] blk_update_request: I/O error, dev mmcblk0, sector 3633287 [ 43.204365] mmcblk0: error -110 transferring data, sector 3633288, nr 128, cmd response 0x900, card status 0x0 [ 43.214475] blk_update_request: I/O error, dev mmcblk0, sector 3633288 [ 47.288711] mmcblk0: error -110 transferring data, sector 3633289, nr 127, cmd response 0x900, card status 0x0 [ 47.298815] blk_update_request: I/O error, dev mmcblk0, sector 3633289 [ 51.373033] mmcblk0: error -110 transferring data, sector 3633290, nr 126, cmd response 0x900, card status 0x0 [ 51.383144] blk_update_request: I/O error, dev mmcblk0, sector 3633290 [ 55.457378] mmcblk0: error -110 transferring data, sector 3633291, nr 125, cmd response 0x900, card status 0x0 [ 55.467480] blk_update_request: I/O error, dev mmcblk0, sector 3633291 [ 59.541706] mmcblk0: error -110 transferring data, sector 3633292, nr 124, cmd response 0x900, card status 0x0 [ 59.551843] blk_update_request: I/O error, dev mmcblk0, sector 3633292 [ 63.626122] mmcblk0: error -110 transferring data, sector 3633293, nr 123, cmd response 0x900, card status 0x0 [ 63.636232] blk_update_request: I/O error, dev mmcblk0, sector 3633293 [ 67.710467] mmcblk0: error -110 transferring data, sector 3633294, nr 122, cmd response 0x900, card status 0x0 [ 67.720578] blk_update_request: I/O error, dev mmcblk0, sector 3633294 [ 71.794754] mmcblk0: error -110 transferring data, sector 3633295, nr 121, cmd response 0x900, card status 0x0 [ 71.804863] blk_update_request: I/O error, dev mmcblk0, sector 3633295 [ 75.879110] mmcblk0: error -110 transferring data, sector 3633296, nr 120, cmd response 0x900, card status 0x0 [ 75.889218] blk_update_request: I/O error, dev mmcblk0, sector 3633296 [ 79.963393] mmcblk0: error -110 transferring data, sector 3633297, nr 119, cmd response 0x900, card status 0x0 [ 79.973503] blk_update_request: I/O error, dev mmcblk0, sector 3633297
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.069971] blk_update_request: I/O error, dev mmcblk0, sector 3633505 [ 18.143956] mmcblk0: error -110 transferring data, sector 3633506, nr 230, cmd response 0x900, card status 0x0 [ 18.154031] blk_update_request: I/O error, dev mmcblk0, sector 3633506 [ 22.228012] mmcblk0: error -110 transferring data, sector 3633507, nr 229, cmd response 0x900, card status 0x0 [ 22.238091] blk_update_request: I/O error, dev mmcblk0, sector 3633507 [ 26.312075] mmcblk0: error -110 transferring data, sector 3633508, nr 228, cmd response 0x900, card status 0x0 [ 26.322153] blk_update_request: I/O error, dev mmcblk0, sector 3633508 [ 30.396143] mmcblk0: error -110 transferring data, sector 3633509, nr 227, cmd response 0x900, card status 0x0 [ 30.406228] blk_update_request: I/O error, dev mmcblk0, sector 3633509 [ 34.480220] mmcblk0: error -110 transferring data, sector 3633510, nr 226, cmd response 0x900, card status 0x0 [ 34.490297] blk_update_request: I/O error, dev mmcblk0, sector 3633510 [ 38.564283] mmcblk0: error -110 transferring data, sector 3633511, nr 225, cmd response 0x900, card status 0x0 [ 38.574351] blk_update_request: I/O error, dev mmcblk0, sector 3633511 [ 42.648398] mmcblk0: error -110 transferring data, sector 3633512, nr 224, cmd response 0x900, card status 0x0 [ 42.658469] blk_update_request: I/O error, dev mmcblk0, sector 3633512 [ 46.732451] mmcblk0: error -110 transferring data, sector 3633513, nr 223, cmd response 0x900, card status 0x0 [ 46.742524] blk_update_request: I/O error, dev mmcblk0, sector 3633513 [ 50.816512] mmcblk0: error -110 transferring data, sector 3633514, nr 222, cmd response 0x900, card status 0x0 [ 50.826599] blk_update_request: I/O error, dev mmcblk0, sector 3633514 [ 54.900591] mmcblk0: error -110 transferring data, sector 3633515, nr 221, cmd response 0x900, card status 0x0 [ 54.910662] blk_update_request: I/O error, dev mmcblk0, sector 3633515 [ 58.984645] mmcblk0: error -110 transferring data, sector 3633516, nr 220, cmd response 0x900, card status 0x0 [ 58.994720] blk_update_request: I/O error, dev mmcblk0, sector 3633516 [ 63.068706] mmcblk0: error -110 transferring data, sector 3633517, nr 219, cmd response 0x900, card status 0x0 [ 63.078780] blk_update_request: I/O error, dev mmcblk0, sector 3633517 [ 67.152765] mmcblk0: error -110 transferring data, sector 3633518, nr 218, cmd response 0x900, card status 0x0 [ 67.162841] blk_update_request: I/O error, dev mmcblk0, sector 3633518 [ 71.236824] mmcblk0: error -110 transferring data, sector 3633519, nr 217, cmd response 0x900, card status 0x0 [ 71.246900] blk_update_request: I/O error, dev mmcblk0, sector 3633519 [ 75.320888] mmcblk0: error -110 transferring data, sector 3633520, nr 216, cmd response 0x900, card status 0x0 [ 75.330970] blk_update_request: I/O error, dev mmcblk0, sector 3633520 [ 79.404957] mmcblk0: error -110 transferring data, sector 3633521, nr 215, cmd response 0x900, card status 0x0 [ 79.415038] blk_update_request: I/O error, dev mmcblk0, sector 3633521
[PYBOOT] [cosmic 02:08]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:09]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:10]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 14.123767] blk_update_request: I/O error, dev mmcblk0, sector 3633281 [ 18.197675] mmcblk0: error -110 transferring data, sector 3633282, nr 134, cmd response 0x900, card status 0x0 [ 18.207733] blk_update_request: I/O error, dev mmcblk0, sector 3633282 [ 22.281638] mmcblk0: error -110 transferring data, sector 3633283, nr 133, cmd response 0x900, card status 0x0 [ 22.291697] blk_update_request: I/O error, dev mmcblk0, sector 3633283 [ 26.365601] mmcblk0: error -110 transferring data, sector 3633284, nr 132, cmd response 0x900, card status 0x0 [ 26.375664] blk_update_request: I/O error, dev mmcblk0, sector 3633284 [ 30.449579] mmcblk0: error -110 transferring data, sector 3633285, nr 131, cmd response 0x900, card status 0x0 [ 30.459645] blk_update_request: I/O error, dev mmcblk0, sector 3633285 [ 34.533556] mmcblk0: error -110 transferring data, sector 3633286, nr 130, cmd response 0x900, card status 0x0 [ 34.543603] blk_update_request: I/O error, dev mmcblk0, sector 3633286 [ 38.617513] mmcblk0: error -110 transferring data, sector 3633287, nr 129, cmd response 0x900, card status 0x0 [ 38.627567] blk_update_request: I/O error, dev mmcblk0, sector 3633287 [ 42.701484] mmcblk0: error -110 transferring data, sector 3633288, nr 128, cmd response 0x900, card status 0x0 [ 42.711532] blk_update_request: I/O error, dev mmcblk0, sector 3633288 [ 46.785436] mmcblk0: error -110 transferring data, sector 3633289, nr 127, cmd response 0x900, card status 0x0 [ 46.795488] blk_update_request: I/O error, dev mmcblk0, sector 3633289 [ 50.869401] mmcblk0: error -110 transferring data, sector 3633290, nr 126, cmd response 0x900, card status 0x0 [ 50.879453] blk_update_request: I/O error, dev mmcblk0, sector 3633290 [ 54.953363] mmcblk0: error -110 transferring data, sector 3633291, nr 125, cmd response 0x900, card status 0x0 [ 54.963417] blk_update_request: I/O error, dev mmcblk0, sector 3633291 [ 59.037327] mmcblk0: error -110 transferring data, sector 3633292, nr 124, cmd response 0x900, card status 0x0 [ 59.047382] blk_update_request: I/O error, dev mmcblk0, sector 3633292 [ 63.121289] mmcblk0: error -110 transferring data, sector 3633293, nr 123, cmd response 0x900, card status 0x0 [ 63.131346] blk_update_request: I/O error, dev mmcblk0, sector 3633293 [ 67.205253] mmcblk0: error -110 transferring data, sector 3633294, nr 122, cmd response 0x900, card status 0x0 [ 67.215312] blk_update_request: I/O error, dev mmcblk0, sector 3633294 [ 71.289219] mmcblk0: error -110 transferring data, sector 3633295, nr 121, cmd response 0x900, card status 0x0 [ 71.299277] blk_update_request: I/O error, dev mmcblk0, sector 3633295 [ 75.373187] mmcblk0: error -110 transferring data, sector 3633296, nr 120, cmd response 0x900, card status 0x0 [ 75.383249] blk_update_request: I/O error, dev mmcblk0, sector 3633296 [ 79.457153] mmcblk0: error -110 transferring data, sector 3633297, nr 119, cmd response 0x900, card status 0x0 [ 79.467214] blk_update_request: I/O error, dev mmcblk0, sector 3633297
[PYBOOT] [cosmic 01:59]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:00]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:01]: Done. Board hummingboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 3.3 MiB/s done Bytes transferred = 6499008 (632ac0 hex) C1 U-Boot > setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 C1 U-Boot > tftp 0x18000000 tmp/hummingboard-IA4n5g/imx6dl-hummingboard.dtb tftp 0x18000000 tmp/hummingboard-IA4n5g/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.20.2; our IP address is 172.16.20.118 Filename 'tmp/hummingboard-IA4n5g/imx6dl-hummingboard.dtb'. Load address: 0x18000000 Loading: *### 2.8 MiB/s done Bytes transferred = 32347 (7e5b hex) C1 U-Boot > bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000
[PYBOOT] [hummingboard 00:31]: u-boot: jumping to kernel image bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0x632ac0 ] ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800ae5a
Starting kernel ...
[PYBOOT] [hummingboard 00:31]: u-boot: started kernel.
[PYBOOT] [hummingboard 01:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [hummingboard 01:07]: got exception: timeout ~$off
[PYBOOT] [hummingboard 01:09]: Done. Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.360710] dwmmc_exynos 12220000.mmc: 1 slots initialized [ 1.365506] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.372433] ledtrig-cpu: registered to indicate activity on CPUs [ 1.377354] usbcore: registered new interface driver usbhid [ 1.382527] usbhid: USB HID core driver [ 1.386422] isl29018 7-0044: No cache defaults, reading back from HW [ 1.392778] isl29018 7-0044: Failed to read 1: -6 [ 1.397362] isl29018 7-0044: regmap initialization fails: -6 [ 1.407510] NET: Registered protocol family 10 [ 1.411943] sit: IPv6 over IPv4 tunneling driver [ 1.415478] NET: Registered protocol family 17 [ 1.419528] can: controller area network core (rev 20120528 abi 9) [ 1.425714] NET: Registered protocol family 29 [ 1.430082] can: raw protocol (rev 20120528) [ 1.434352] can: broadcast manager protocol (rev 20120528 t) [ 1.439993] can: netlink gateway (rev 20130117) max_hops=1 [ 1.445741] Key type dns_resolver registered [ 1.450002] ThumbEE CPU extension supported. [ 1.453963] Registering SWP/SWPB emulation handler [ 1.463002] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.468488] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.474848] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.480223] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.490293] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.499805] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.505234] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.515388] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.521613] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.526993] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.536700] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.558885] Waiting for root device /dev/mmcblk0p1... [ 1.562770] mmc0: tuning execution failed: -5 [ 1.566823] mmc0: error -5 whilst initialising MMC card
[PYBOOT] [pi 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:59]: got exception: timeout ~$off
[PYBOOT] [pi 02:00]: Done. Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.360765] dwmmc_exynos 12220000.mmc: 1 slots initialized [ 1.365563] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.372489] ledtrig-cpu: registered to indicate activity on CPUs [ 1.377404] usbcore: registered new interface driver usbhid [ 1.382575] usbhid: USB HID core driver [ 1.386470] isl29018 7-0044: No cache defaults, reading back from HW [ 1.392827] isl29018 7-0044: Failed to read 1: -6 [ 1.397411] isl29018 7-0044: regmap initialization fails: -6 [ 1.407554] NET: Registered protocol family 10 [ 1.411993] sit: IPv6 over IPv4 tunneling driver [ 1.415529] NET: Registered protocol family 17 [ 1.419578] can: controller area network core (rev 20120528 abi 9) [ 1.425763] NET: Registered protocol family 29 [ 1.430131] can: raw protocol (rev 20120528) [ 1.434401] can: broadcast manager protocol (rev 20120528 t) [ 1.440042] can: netlink gateway (rev 20130117) max_hops=1 [ 1.445779] Key type dns_resolver registered [ 1.450055] ThumbEE CPU extension supported. [ 1.454011] Registering SWP/SWPB emulation handler [ 1.463064] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.468544] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.474907] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.480281] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.490355] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.499869] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.505301] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.515455] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.521680] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.527059] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.536768] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.558953] Waiting for root device /dev/mmcblk0p1... [ 1.562836] mmc0: tuning execution failed: -5 [ 1.566889] mmc0: error -5 whilst initialising MMC card
[PYBOOT] [pi 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:48]: got exception: timeout ~$off
[PYBOOT] [pi 01:49]: Done. Board snow-arm-exynos_defconfig failure log: -------------------------------------------------
[ 6.675918] loop: module loaded [ 6.678152] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/spi@12d30000[0]' - status (0) [ 6.687567] usbcore: registered new interface driver r8152 [ 6.692558] usbcore: registered new interface driver asix [ 6.697927] usbcore: registered new interface driver ax88179_178a [ 6.703999] usbcore: registered new interface driver cdc_ether [ 6.709825] usbcore: registered new interface driver smsc75xx [ 6.715554] usbcore: registered new interface driver smsc95xx [ 6.721271] usbcore: registered new interface driver net1080 [ 6.726912] usbcore: registered new interface driver cdc_subset [ 6.732814] usbcore: registered new interface driver zaurus [ 6.738392] usbcore: registered new interface driver cdc_ncm [ 6.744364] exynos-dwc3 usb@12000000: no suspend clk specified [ 6.749811] usb@12000000 supply vdd33 not found, using dummy regulator [ 6.756341] usb@12000000 supply vdd10 not found, using dummy regulator [ 6.763719] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.769339] ehci-exynos: EHCI EXYNOS driver [ 6.773594] of_get_named_gpiod_flags: parsed 'samsung,vbus-gpio' property of node '/usb@12110000[0]' - status (0) [ 6.783917] exynos-ehci 12110000.usb: EHCI Host Controller [ 6.789225] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 [ 6.796940] exynos-ehci 12110000.usb: irq 109, io mem 0x12110000 [ 6.810880] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 [ 6.815506] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.822190] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.829389] usb usb1: Product: EHCI Host Controller [ 6.834249] usb usb1: Manufacturer: Linux 4.6.0-rc1-next-20160331 ehci_hcd [ 6.841106] usb usb1: SerialNumber: 12110000.usb [ 6.846121] hub 1-0:1.0: USB hub found [ 6.849447] hub 1-0:1.0: 3 ports detected [ 6.853897] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 6.859617] ohci-exynos: OHCI EXYNOS driver [ 6.863918] exynos-ohci 12120000.usb: USB Host Controller [ 6.869162] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2
[PYBOOT] [snow 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snow 02:07]: got exception: timeout ~$off
[PYBOOT] [snow 02:08]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 6.749185] [c1038dc0] *pgd=4100041e(bad) [ 0.000000] Machine model: Google Snow [ 0.000000] cma: Reserved 64 MiB at 0xbb800000 [ 6.761336] Modules linked in: [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 523264 [ 0.000000] free_area_init_node: node 0, pgdat c10fe518, node_mem_map eeff7000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 326656 pages, LIFO batch:31 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xd4/0x130 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-rc1-next-20160331 #1 [ 0.000000] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 0.000000] [<c030e900>] (unwind_backtrace) from [<c030b474>] (show_stack+0x10/0x14) [ 0.000000] [<c030b474>] (show_stack) from [<c0335d98>] (__warn+0xe4/0xfc) [ 0.000000] [<c0335d98>] (__warn) from [<c0335de8>] (warn_slowpath_fmt+0x38/0x48) [ 0.000000] [<c0335de8>] (warn_slowpath_fmt) from [<c0f04108>] (arm_dt_init_cpu_maps+0xd4/0x130) [ 0.000000] [<c0f04108>] (arm_dt_init_cpu_maps) from [<c0f03448>] (setup_arch+0x7dc/0x910) [ 0.000000] [<c0f03448>] (setup_arch) from [<c0f00944>] (start_kernel+0x68/0x370) [ 0.000000] [<c0f00944>] (start_kernel) from [<40208078>] (0x40208078) [ 0.000000] ---[ end trace cb88537fdc8fa200 ]--- [ 0.000000] CPU: All CPU(s) started in HYP mode. [ 0.000000] CPU: Virtualization extensions available. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0
[PYBOOT] [snow 02:08]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snow 02:09]: got exception: timeout ~$off
[PYBOOT] [snow 02:10]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 7.483734] EXT4-fs (mmcblk0p4): Total free blocks count 0 [ 7.489227] EXT4-fs (mmcblk0p4): Free/Dirty block details [ 7.494628] EXT4-fs (mmcblk0p4): free_blocks=158 [ 7.499237] EXT4-fs (mmcblk0p4): dirty_blocks=3 [ 7.503814] EXT4-fs (mmcblk0p4): Block reservation details [ 7.509338] EXT4-fs (mmcblk0p4): i_reserved_data_blocks=1 [ 7.522064] JBD2: Spotted dirty metadata buffer (dev = mmcblk0p4, blocknr = 0). There's a risk of filesystem corruption in case of system crash. [ 7.802368] JBD2: Spotted dirty metadata buffer (dev = mmcblk0p4, blocknr = 0). There's a risk of filesystem corruption in case of system crash. [ 7.831176] random: nonblocking pool is initialized [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Root filesystem has insufficient free space; mounting tmpfs on /tmp ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Configuring network interfaces...[ 9.054870] smsc911x 50000000.ethernet eth0: MAC Address: 08:00:08:1e:0f:44 Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 9.240539] smsc911x 50000000.ethernet eth0: SMSC911x/921x identified at 0xf0a00000, IRQ: 219 [ 9.249145] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/08:00:08:1e:0f:44 Sending on LPF/eth0/08:00:08:1e:0f:44 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 03:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 03:08]: got exception: timeout ~$off
[PYBOOT] [snowball 03:09]: Done. Board socfpga-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 69.277965] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 69.331381] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 69.341179] mmc0: error -110 whilst initialising SD card [ 70.357964] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 70.411379] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 70.421177] mmc0: error -110 whilst initialising SD card [ 71.437965] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 71.491381] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 71.501179] mmc0: error -110 whilst initialising SD card [ 72.517966] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 72.571374] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 72.581171] mmc0: error -110 whilst initialising SD card [ 73.597964] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 73.651377] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 73.661176] mmc0: error -110 whilst initialising SD card [ 74.677965] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 74.731376] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 74.741174] mmc0: error -110 whilst initialising SD card [ 75.757964] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 75.811378] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 75.821175] mmc0: error -110 whilst initialising SD card [ 76.837964] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 76.891376] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 76.901171] mmc0: error -110 whilst initialising SD card [ 77.917965] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 77.971378] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 77.981176] mmc0: error -110 whilst initialising SD card [ 78.997965] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 79.051380] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 79.061179] mmc0: error -110 whilst initialising SD card [ 80.077965] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 80.131378] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 80.141177] mmc0: error -110 whilst initialising SD card
[PYBOOT] [socfpga 01:55]: Timed out waiting for "<type 'str'>": [ 81.1 [PYBOOT] [socfpga 01:56]: got exception: timeout ~$off
[PYBOOT] [socfpga 01:57]: Done. Board socfpga-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 70.329833] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 70.383185] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 70.392946] mmc0: error -110 whilst initialising SD card [ 71.409833] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 71.463184] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 71.472945] mmc0: error -110 whilst initialising SD card [ 72.489833] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 72.543185] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 72.552955] mmc0: error -110 whilst initialising SD card [ 73.569834] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 73.623183] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 73.632953] mmc0: error -110 whilst initialising SD card [ 74.649834] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 74.703184] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 74.712953] mmc0: error -110 whilst initialising SD card [ 75.729834] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 75.783182] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 75.792952] mmc0: error -110 whilst initialising SD card [ 76.809834] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 76.863182] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 76.872953] mmc0: error -110 whilst initialising SD card [ 77.889833] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 77.943183] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 77.952954] mmc0: error -110 whilst initialising SD card [ 78.969833] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 79.023184] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 79.032944] mmc0: error -110 whilst initialising SD card [ 80.049833] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 80.103186] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 80.112957] mmc0: error -110 whilst initialising SD card
[PYBOOT] [socfpga 01:51]: Timed out waiting for "<type 'str'>": [ 81.129834] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 81.183184] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 81.192954] mmc0: error -110 whilst initialising SD card
[PYBOOT] [socfpga 01:52]: got exception: timeout ~$off
[PYBOOT] [socfpga 01:53]: Done. Board socfpga-arm-socfpga_defconfig failure log: -------------------------------------------------
[ 69.843637] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 69.901987] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 69.911763] mmc0: error -110 whilst initialising SD card [ 70.933637] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 70.991986] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 71.001762] mmc0: error -110 whilst initialising SD card [ 72.023637] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 72.081986] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 72.091762] mmc0: error -110 whilst initialising SD card [ 73.113637] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 73.171987] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 73.181762] mmc0: error -110 whilst initialising SD card [ 74.203637] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 74.261985] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 74.271760] mmc0: error -110 whilst initialising SD card [ 75.293637] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 75.351986] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 75.361762] mmc0: error -110 whilst initialising SD card [ 76.383637] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 76.441986] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 76.451763] mmc0: error -110 whilst initialising SD card [ 77.473638] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 77.531986] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 77.541763] mmc0: error -110 whilst initialising SD card [ 78.563637] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 78.621986] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 78.631762] mmc0: error -110 whilst initialising SD card [ 79.653637] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 79.711985] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 79.721760] mmc0: error -110 whilst initialising SD card
[PYBOOT] [socfpga 01:48]: Timed out waiting for "<type 'str'>": [ 80.743637] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 80.801985] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 80.811761] mmc0: error -110 whilst initialising SD card
[PYBOOT] [socfpga 01:49]: got exception: timeout ~$off
[PYBOOT] [socfpga 01:50]: Done.