Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20160429/
Failed boards:
arndale arm-multi_v7_nosmp_defconfig : FAILED 18:28.74 bbb arm-omap2plus_defconfig : FAILED 1:54.18 bbb arm-multi_v7_defconfig : FAILED 1:54.59 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:10.63 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:46.15 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:43.88 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:50.34 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 2:04.03 beaver arm-multi_v7_defconfig : FAILED 1:53.22 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:50.54 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.73 cosmic arm-multi_v7_defconfig : FAILED 2:07.99 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:06.63 dalmore arm-tegra_defconfig : FAILED 1:53.97 dalmore arm-multi_v7_defconfig : FAILED 1:55.16 dalmore arm-multi_lpae_defconfig : FAILED 2:16.17 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:55.41 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:49.99 omap5uevm arm-omap2plus_defconfig : FAILED 2:04.95 omap5uevm arm-multi_v7_defconfig : FAILED 2:11.49 omap5uevm arm-multi_lpae_defconfig : FAILED 2:08.61 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 2:07.12 pi arm-multi_lpae_defconfig : FAILED 2:10.60 seaboard arm-tegra_defconfig : FAILED 1:57.56 seaboard arm-multi_v7_defconfig : FAILED 1:58.94 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:53.34 snow arm-multi_v7_nosmp_defconfig : FAILED 0:48.36 snowball arm-u8500_defconfig : FAILED 2:00.90 snowball arm-multi_v7_defconfig : FAILED 2:18.89 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:05.48 wandboard arm-imx_v6_v7_defconfig : FAILED 2:58.15
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:15.97 arndale arm-exynos_defconfig : passed 1:30.33 arndale arm-multi_v7_defconfig : passed 1:17.99 arndale arm-multi_lpae_defconfig : passed 1:27.66 capri arm-bcm_defconfig : passed 0:45.59 capri arm-multi_v7_defconfig : passed 0:57.21 capri arm-multi_v7_nosmp_defconfig : warnings 1:00.74 chitra powerpc-pasemi_defconfig : passed 2:02.26 chitra powerpc-ppc64_defconfig : passed 1:54.84 colombus arm-sunxi_defconfig : passed 1:00.38 colombus arm-multi_v7_defconfig : passed 1:35.49 colombus arm-multi_lpae_defconfig : passed 1:22.80 colombus arm-multi_v7_nosmp_defconfig : warnings 3:23.13 cubie arm-sunxi_defconfig : passed 0:48.44 cubie arm-multi_v7_defconfig : passed 0:53.63 cubie arm-multi_v7_nosmp_defconfig : passed 0:58.65 cubie2 arm-sunxi_defconfig : passed 0:41.86 cubie2 arm-multi_v7_defconfig : passed 0:49.08 cubie2 arm-multi_lpae_defconfig : passed 0:45.04 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:05.82 cubox arm-multi_v7_defconfig : passed 1:09.41 cubox arm-mvebu_v7_defconfig : passed 1:30.15 cubox arm-multi_v7_nosmp_defconfig : passed 1:04.66 hummingboard arm-imx_v6_v7_defconfig : passed 1:17.62 hummingboard arm-multi_v7_defconfig : passed 1:10.40 hummingboard arm-multi_v7_nosmp_defconfig : warnings 0:59.34 jetsontk1 arm-tegra_defconfig : warnings 0:51.86 jetsontk1 arm-multi_v7_defconfig : warnings 0:46.65 jetsontk1 arm-multi_lpae_defconfig : warnings 0:50.46 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:43.87 pandaes arm-omap2plus_defconfig : warnings 1:42.83 pandaes arm-multi_v7_defconfig : passed 2:03.81 pandaes arm-multi_v7_nosmp_defconfig : warnings 2:09.06 pi arm-exynos_defconfig : passed 2:12.67 pi arm-multi_v7_defconfig : passed 2:22.24 pit arm-exynos_defconfig : passed 2:12.92 pit arm-multi_v7_defconfig : passed 2:11.89 pit arm-multi_lpae_defconfig : passed 2:28.49 pit arm-multi_v7_nosmp_defconfig : warnings 2:09.60 seattle arm64-defconfig : passed 2:15.94 snow arm-exynos_defconfig : passed 2:04.37 snow arm-multi_v7_defconfig : passed 2:08.84 snow arm-multi_lpae_defconfig : passed 1:59.39 trimslice arm-tegra_defconfig : warnings 1:35.68 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:38.75 wandboard arm-multi_v7_defconfig : passed 0:56.06 wandboard arm-multi_v7_nosmp_defconfig : warnings 0:52.77
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:09.22 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:15.49 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:18.25 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:18.55 parallella arm-multi_v7_defconfig : OFFLINE 2:24.96 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:15.19 pi arm-multi_v7_nosmp_defconfig : OFFLINE 1:52.20 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:45.60 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:49.59 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:56.61 sama5 arm-sama5_defconfig : OFFLINE 2:20.29 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:32.46 socfpga arm-socfpga_defconfig : OFFLINE 2:15.09 socfpga arm-multi_v7_defconfig : OFFLINE 3:12.20 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.44 trimslice arm-multi_v7_defconfig : OFFLINE 2:42.22
Board legend is available at http://arm-soc.lixom.net/boards.html
Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered ThumbEE CPU extension supported. ahci 122f0000.sata: couldn't get PHY in node sata: -517 Booting Linux on physical CPU 0x0 Linux version 4.6.0-rc5-next-20160429 (build@brutus) (gcc version 4.9.2 (GCC) ) #1 Fri Apr 29 00:17:37 PDT 2016 CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d CPU: div instructions available: patching division code CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Machine model: Insignal Arndale evaluation board based on EXYNOS5250 cma: Reserved 64 MiB at 0xbc000000 Memory policy: Data cache writeback Samsung CPU ID: 0x43520010 On node 0 totalpages: 520192 free_area_init_node: node 0, pgdat c10fc2d8, node_mem_map eeff8000 DMA zone: 1536 pages used for memmap DMA zone: 0 pages reserved DMA zone: 192512 pages, LIFO batch:31 HighMem zone: 327680 pages, LIFO batch:31 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xd4/0x130 DT /cpu 2 nodes greater than max cores 1, capping them Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-rc5-next-20160429 #1 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c030 [PYBOOT] [arndale 18:22]: got exception: maximum recursion depth exceeded ~$off
[PYBOOT] [arndale 18:24]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.559258] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.625898] Synopsys Designware Multimedia Card Interface Driver [ 1.633667] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.643459] ledtrig-cpu: registered to indicate activity on CPUs [ 1.650657] usbcore: registered new interface driver usbhid [ 1.656585] usbhid: USB HID core driver [ 1.668359] NET: Registered protocol family 10 [ 1.674901] sit: IPv6 over IPv4 tunneling driver [ 1.681012] NET: Registered protocol family 17 [ 1.685767] can: controller area network core (rev 20120528 abi 9) [ 1.692403] NET: Registered protocol family 29 [ 1.697113] can: raw protocol (rev 20120528) [ 1.701624] can: broadcast manager protocol (rev 20120528 t) [ 1.707608] can: netlink gateway (rev 20130117) max_hops=1 [ 1.714286] Key type dns_resolver registered [ 1.719172] omap_voltage_late_init: Voltage driver support not added [ 1.726144] ThumbEE CPU extension supported. [ 1.730696] Registering SWP/SWPB emulation handler [ 1.776069] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.782623] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.790367] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.799076] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.807008] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.814896] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.822722] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.830082] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.837124] hctosys: unable to open rtc device (rtc0) [ 1.850653] Waiting for root device /dev/mmcblk0p2... [ 1.856420] mmc1: new high speed MMC card at address 0001 [ 1.863204] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.868488] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.875153] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.883762] mmcblk1: p1 p2
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman omap_hsmmc 48060000.mmc: Got CD GPIO Synopsys Designware Multimedia Card Interface Driver sdhci-pltfm: SDHCI platform and OF driver helper ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered omap_voltage_late_init: Voltage driver support not added ThumbEE CPU extension supported. at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz hctosys: unable to open rtc device (rtc0) Waiting for root device /dev/mmcblk0p2... mmc1: new high speed MMC card at address 0001 mmcblk1: mmc1:0001 MMC02G 1.79 GiB mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB mmcblk1: p1 p2
[PYBOOT] [bbb 02:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 02:08]: got exception: timeout ~$off
[PYBOOT] [bbb 02:10]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.065132] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.071262] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.077598] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.084483] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.094092] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.103605] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.110631] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.153759] ledtrig-cpu: registered to indicate activity on CPUs [ 2.162435] oprofile: using arm/armv7 [ 2.167450] Initializing XFRM netlink socket [ 2.172580] NET: Registered protocol family 10 [ 2.183314] sit: IPv6 over IPv4 tunneling driver [ 2.192245] NET: Registered protocol family 17 [ 2.197185] NET: Registered protocol family 15 [ 2.202430] Key type dns_resolver registered [ 2.207291] omap_voltage_late_init: Voltage driver support not added [ 2.214038] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.222518] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.232153] ThumbEE CPU extension supported. [ 2.236794] Registering SWP/SWPB emulation handler [ 2.241822] SmartReflex Class3 initialized [ 2.314679] mmc1: new high speed MMC card at address 0001 [ 2.326789] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.334291] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.342380] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.349642] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.361756] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.369130] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.379917] hctosys: unable to open rtc device (rtc0) [ 2.385362] sr_init: No PMIC hook to init smartreflex [ 2.391042] sr_init: platform driver register failed for SR [ 2.435879] mmcblk1: p1 p2 [ 2.453929] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.191099] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.205933] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.213005] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.239937] rtc-ds1307 2-006f: SET TIME! [ 2.245711] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.252461] rtc-ds1307 2-006f: 64 bytes nvram [ 2.257067] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.265270] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.271042] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.279273] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.288421] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.295291] hub 1-0:1.0: USB hub found [ 2.299237] hub 1-0:1.0: 1 port detected [ 2.303640] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.309418] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.317513] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.326508] hub 2-0:1.0: USB hub found [ 2.330469] hub 2-0:1.0: 1 port detected [ 2.336558] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.400950] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.418634] aic_dvdd_fixed: disabling [ 2.423336] Waiting for root device /dev/mmcblk0p1... [ 2.446509] mmc1: new high speed MMC card at address 0001 [ 2.452536] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.457447] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.463798] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.470697] mmcblk1: p1 [ 2.609429] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.644461] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.669638] hub 2-1:1.0: USB hub found [ 2.673606] hub 2-1:1.0: 4 ports detected [ 2.765651] hub 1-1:1.0: USB hub found [ 2.769635] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:48]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:49]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.190655] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.205378] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.212442] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.235136] rtc-ds1307 2-006f: SET TIME! [ 2.240864] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.247605] rtc-ds1307 2-006f: 64 bytes nvram [ 2.252204] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.260404] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.266179] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.274401] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.283553] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.290419] hub 1-0:1.0: USB hub found [ 2.294367] hub 1-0:1.0: 1 port detected [ 2.298766] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.304529] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.312624] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.321634] hub 2-0:1.0: USB hub found [ 2.325600] hub 2-0:1.0: 1 port detected [ 2.331684] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.396175] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.414265] aic_dvdd_fixed: disabling [ 2.418958] Waiting for root device /dev/mmcblk0p1... [ 2.451721] mmc1: new high speed MMC card at address 0001 [ 2.457741] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.462652] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.468996] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.475914] mmcblk1: p1 [ 2.604644] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.639672] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.664800] hub 2-1:1.0: USB hub found [ 2.668767] hub 2-1:1.0: 4 ports detected [ 2.760751] hub 1-1:1.0: USB hub found [ 2.764732] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz rtc-ds1307 2-006f: SET TIME! rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 rtc-ds1307 2-006f: 64 bytes nvram omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz xhci-hcd xhci-hcd.0.auto: xHCI Host Controller xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected xhci-hcd xhci-hcd.0.auto: xHCI Host Controller xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected omap_hsmmc 4809c000.mmc: Got CD GPIO rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) aic_dvdd_fixed: disabling Waiting for root device /dev/mmcblk0p1... mmc1: new high speed MMC card at address 0001 mmcblk1: mmc1:0001 S10004 3.56 GiB mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB mmcblk1: p1 usb 1-1: new high-speed USB device number 2 using xhci-hcd usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 02:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 02:02]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 02:03]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 4.219696] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.225995] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.232888] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 4.243268] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 4.248133] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.254426] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.261287] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.270880] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.280377] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.287439] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.337155] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 4.343456] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.350328] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.359928] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.369419] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.376460] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 4.382583] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 4.388897] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.395741] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.405338] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.414841] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.421877] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 4.467455] hctosys: unable to open rtc device (rtc0) [ 4.472755] sr_init: No PMIC hook to init smartreflex [ 4.478273] sr_init: platform driver register failed for SR [ 4.524241] aic_dvdd_fixed: disabling [ 4.528502] ldousb: disabling [ 4.534671] Waiting for root device /dev/mmcblk0p1... [ 4.578786] mmc1: new high speed MMC card at address 0001 [ 4.586775] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 4.592082] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 4.598881] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 4.607374] mmcblk1: p1
[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:45]: Done. Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.278082] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.285038] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.291558] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 3.298429] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.304015] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.311114] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.321111] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.332408] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.339050] [drm] No driver support for vblank timestamp query. [ 3.344989] drm drm: No connectors reported connected with modes [ 3.350998] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.377689] Console: switching to colour frame buffer device 128x48 [ 3.389804] drm drm: fb0: frame buffer device [ 3.408751] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.419548] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.426011] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.431421] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.439258] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.453760] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.460982] hub 1-0:1.0: USB hub found [ 3.464753] hub 1-0:1.0: 1 port detected [ 3.469676] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.475090] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.482822] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.498768] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.505906] hub 2-0:1.0: USB hub found [ 3.509674] hub 2-0:1.0: 1 port detected [ 3.519980] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.533628] vdd_sata,avdd_plle: disabling [ 3.538424] usb1_vbus: disabling [ 3.542490] Waiting for root device /dev/mmcblk0p1... [ 3.823758] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.767670] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:50]: got exception: timeout ~$off
[PYBOOT] [beaver 01:51]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt pci 0000:01:00.0: Signaling PME through PCIe PME interrupt pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:01:00.0: enabling device (0140 -> 0143) r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] No driver support for vblank timestamp query. drm drm: No connectors reported connected with modes [drm] Cannot find any crtc or sizes - going 1024x768 Console: switching to colour frame buffer device 128x48 drm drm: fb0: frame buffer device [drm] Initialized tegra 0.0.0 20120330 on minor 0 utmi_phy_clk_enable: timeout waiting for phy to stabilize tegra-ehci 7d004000.usb: EHCI Host Controller tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected tegra-ehci 7d008000.usb: EHCI Host Controller tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) vdd_sata,avdd_plle: disabling usb1_vbus: disabling Waiting for root device /dev/mmcblk0p1... usb 2-1: new high-speed USB device number 2 using tegra-ehci asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:48]: got exception: timeout ~$off
[PYBOOT] [beaver 01:50]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.654062] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.728097] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.738408] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.812493] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.822800] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.896830] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.907142] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.981230] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.991547] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 35.065627] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 35.075940] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 39.150020] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 39.160327] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.234408] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.244716] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.318744] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.329053] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.403127] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.413443] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.487467] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.497779] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.571861] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.582220] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.656254] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.666565] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.740640] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.750954] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.825033] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.835342] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.909383] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.919698] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.993772] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 80.004086] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:00]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:01]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.046701] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.120680] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.130761] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.204742] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.214820] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.288806] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.298889] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.372872] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.382976] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.456965] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.467055] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.541033] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.551108] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.625099] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.635177] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.709158] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.719227] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.793207] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.803280] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.877262] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.887340] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.961319] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.971399] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.045375] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.055450] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.129426] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.139502] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.213554] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.223618] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.297602] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.307683] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.381663] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.391742] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:06]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:07]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
blk_update_request: I/O error, dev mmcblk0, sector 3633185 mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633186 mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633187 mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633188 mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633189 mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633190 mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633191 mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633192 mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633193 mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633194 mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633195 mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633196 mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633197 mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633198 mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633199 mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633200 mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:03]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:04]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.790371] can: netlink gateway (rev 20130117) max_hops=1 [ 2.797441] Key type dns_resolver registered [ 2.803777] ThumbEE CPU extension supported. [ 2.808178] Registering SWP/SWPB emulation handler [ 2.822437] usb1_vbus: supplied by vdd-sys-5v0 [ 2.833027] usb2_vbus: supplied by vdd-sys-5v0 [ 2.851991] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.876485] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.883265] [drm] No driver support for vblank timestamp query. [ 2.893536] mmc1: new high speed MMC card at address 0001 [ 2.902818] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.909458] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.918056] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.926188] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.935959] mmcblk1: p1 [ 3.060380] Console: switching to colour frame buffer device 240x75 [ 3.147786] drm drm: fb0: frame buffer device [ 3.166166] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.181359] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.186956] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.195731] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.211170] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.221581] hub 1-0:1.0: USB hub found [ 3.225583] hub 1-0:1.0: 1 port detected [ 3.235615] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.249187] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.311666] dvdd_ts: disabling [ 3.314772] usb1_vbus: disabling [ 3.318150] vdd_cam_1v8_reg: disabling [ 3.325423] Waiting for root device /dev/mmcblk0p1... [ 3.536179] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.524581] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.556140] random: nonblocking pool is initialized
[PYBOOT] [dalmore 02:13]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:14]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:15]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.785299] can: netlink gateway (rev 20130117) max_hops=1 [ 2.792259] Key type dns_resolver registered [ 2.798716] ThumbEE CPU extension supported. [ 2.803108] Registering SWP/SWPB emulation handler [ 2.817325] usb1_vbus: supplied by vdd-sys-5v0 [ 2.825903] usb2_vbus: supplied by vdd-sys-5v0 [ 2.843772] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.866236] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.873037] [drm] No driver support for vblank timestamp query. [ 2.898119] mmc1: new high speed MMC card at address 0001 [ 2.906994] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.915434] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.923940] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.932278] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.942207] mmcblk1: p1 [ 3.050825] Console: switching to colour frame buffer device 240x75 [ 3.138256] drm drm: fb0: frame buffer device [ 3.158258] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.173324] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.178911] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.187426] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.203285] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.213700] hub 1-0:1.0: USB hub found [ 3.217696] hub 1-0:1.0: 1 port detected [ 3.228270] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.243202] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.303384] dvdd_ts: disabling [ 3.306489] usb1_vbus: disabling [ 3.309861] vdd_cam_1v8_reg: disabling [ 3.317178] Waiting for root device /dev/mmcblk0p1... [ 3.533248] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.511514] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.349802] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:53]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:54]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered ThumbEE CPU extension supported. usb1_vbus: supplied by vdd-sys-5v0 usb2_vbus: supplied by vdd-sys-5v0 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] No driver support for vblank timestamp query. Console: switching to colour frame buffer device 240x75 drm drm: fb0: frame buffer device [drm] Initialized tegra 0.0.0 20120330 on minor 0 tegra-ehci 7d008000.usb: EHCI Host Controller tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 mmc1: new high speed MMC card at address 0001 tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 mmcblk1: mmc1:0001 SEM32G 29.1 GiB mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 hub 1-0:1.0: USB hub found mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB hub 1-0:1.0: 1 port detected mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB input: gpio-keys as /devices/soc0/gpio-keys/input/input0 mmcblk1: p1 palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) dvdd_ts: disabling usb1_vbus: disabling vdd_cam_1v8_reg: disabling Waiting for root device /dev/mmcblk0p1... usb 1-1: new high-speed USB device number 2 using tegra-ehci asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f
[PYBOOT] [dalmore 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:53]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:54]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 5.476488] Bluetooth: RFCOMM socket layer initialized [ 5.481712] Bluetooth: RFCOMM ver 1.11 [ 5.485528] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.491014] Bluetooth: BNEP socket layer initialized [ 5.496074] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 5.502077] Bluetooth: HIDP socket layer initialized [ 5.508410] Key type dns_resolver registered [ 5.517864] Registering SWP/SWPB emulation handler [ 5.532792] usb1_vbus: supplied by vdd-sys-5v0 [ 5.542374] usb2_vbus: supplied by vdd-sys-5v0 [ 5.559223] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 5.590764] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.597562] [drm] No driver support for vblank timestamp query. [ 5.774764] Console: switching to colour frame buffer device 240x75 [ 5.861664] drm drm: fb0: frame buffer device [ 5.896167] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 5.905304] tegra-ehci 7d008000.usb: EHCI Host Controller [ 5.911157] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 5.920324] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 5.946171] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 5.960281] hub 1-0:1.0: USB hub found [ 5.964309] hub 1-0:1.0: 1 port detected [ 5.978110] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 5.993133] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 6.087186] dvdd_ts: disabling [ 6.090294] usb1_vbus: disabling [ 6.093559] vdd_cam_1v8_reg: disabling [ 6.098258] ALSA device list: [ 6.101251] #0: NVIDIA Tegra Dalmore [ 6.107109] Waiting for root device /dev/mmcblk0p1... [ 6.286171] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 7.321055] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.184128] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:52]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:53]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.719080] Key type dns_resolver registered [ 1.723395] Registering SWP/SWPB emulation handler [ 1.736293] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.738584] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.746009] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.753151] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.759777] [drm] No driver support for vblank timestamp query. [ 1.765679] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.772022] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.777229] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.784538] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.791575] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 1.791584] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.792435] hub 1-3:1.0: USB hub found [ 1.792569] hub 1-3:1.0: 3 ports detected [ 1.806798] max98090 1-0010: MAX98090 REVID=0x43 [ 1.809096] max98090 1-0010: use default 2.8v micbias [ 1.824440] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.834105] mmc1: new DDR MMC card at address 0001 [ 1.837923] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.842125] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.852039] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.856194] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.862096] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.868012] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.874652] mmcblk1: p1 p2 [ 1.876218] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.897202] VDD10_HDMI_1.0V: disabling [ 1.897915] vdd_g3d: disabling [ 1.899002] BUCK8_2.8V: disabling [ 1.9030n4] ALSA device list: [ 1.904589] #0: Odroid-U3 [ 1.908531] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:47]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:48]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.974679] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.981177] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.989206] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.000296] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.008538] smsc95xx v1.0.4 [ 2.011918] ldo9: bypassed regulator has no supply! [ 2.017056] ldo9: failed to get the current voltage(-517) [ 2.022740] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.038342] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.064399] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.070892] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.097932] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, ba:e8:5f:4f:36:07 [ 2.114928] smps9: Bringing 0uV into 2100000-2100000uV [ 2.134002] ldo9: bypassed regulator has no supply! [ 2.139121] ldo9: failed to get the current voltage(-517) [ 2.144792] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.158930] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.192490] smps9: Bringing 0uV into 2100000-2100000uV [ 2.211548] ldo9: bypassed regulator has no supply! [ 2.216666] ldo9: failed to get the current voltage(-517) [ 2.222341] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.236893] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:02:22 UTC (946684942) [ 2.252543] pbias_mmc_omap5: disabling [ 2.256483] vmmcsdio_fixed: disabling [ 2.261028] Waiting for root device /dev/mmcblk1p2... [ 2.338576] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.474467] hub 1-2:1.0: USB hub found [ 2.478485] hub 1-2:1.0: 3 ports detected [ 2.484240] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.512569] smps9: Bringing 0uV into 2100000-2100000uV [ 2.531612] ldo9: bypassed regulator has no supply! [ 2.536737] ldo9: failed to get the current voltage(-517) [ 2.542406] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:07]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:08]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.969778] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.976290] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.984307] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.995518] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.003677] smsc95xx v1.0.4 [ 2.007122] ldo9: bypassed regulator has no supply! [ 2.012259] ldo9: failed to get the current voltage(-517) [ 2.017939] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.033536] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.059318] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.065726] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.092335] smps9: Bringing 0uV into 2100000-2100000uV [ 2.098455] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 9e:5d:f8:23:a3:81 [ 2.123319] ldo9: bypassed regulator has no supply! [ 2.128448] ldo9: failed to get the current voltage(-517) [ 2.134123] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.148263] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.177240] smps9: Bringing 0uV into 2100000-2100000uV [ 2.195984] ldo9: bypassed regulator has no supply! [ 2.201113] ldo9: failed to get the current voltage(-517) [ 2.206780] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.221295] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.236967] pbias_mmc_omap5: disabling [ 2.240920] vmmcsdio_fixed: disabling [ 2.245472] Waiting for root device /dev/mmcblk1p2... [ 2.358533] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.494368] hub 1-2:1.0: USB hub found [ 2.498385] hub 1-2:1.0: 3 ports detected [ 2.504194] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.532298] smps9: Bringing 0uV into 2100000-2100000uV [ 2.551129] ldo9: bypassed regulator has no supply! [ 2.556252] ldo9: failed to get the current voltage(-517) [ 2.561922] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:08]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:10]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
ldo1: Bringing 0uV into 1800000-1800000uV ldo2: Bringing 0uV into 2800000-2800000uV ldo4: Bringing 0uV into 1800000-1800000uV ldo7: Bringing 0uV into 2000000-2000000uV ldo9: bypassed regulator has no supply! ldo9: failed to get the current voltage(-517) palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz smsc95xx v1.0.4 omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz omap-dwc3 4a020000.omap_dwc3: vbus init failed smps9: Bringing 0uV into 2100000-2100000uV ldo9: bypassed regulator has no supply! ldo9: failed to get the current voltage(-517) palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:04:39 UTC (946685079) pbias_mmc_omap5: disabling vmmcsdio_fixed: disabling smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, f2:7d:04:16:f0:a8 omap-dwc3 4a020000.omap_dwc3: vbus init failed smps9: Bringing 0uV into 2100000-2100000uV ldo9: bypassed regulator has no supply! ldo9: failed to get the current voltage(-517) palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator Waiting for root device /dev/mmcblk1p2... usb 1-2: new high-speed USB device number 3 using ehci-omap hub 1-2:1.0: USB hub found hub 1-2:1.0: 3 ports detected omap-dwc3 4a020000.omap_dwc3: vbus init failed smps9: Bringing 0uV into 2100000-2100000uV ldo9: bypassed regulator has no supply! ldo9: failed to get the current voltage(-517) palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:04]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:05]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:06]: Done. Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 3.937160] ldo9: bypassed regulator has no supply! [ 3.942296] ldo9: failed to get the current voltage(-517) [ 3.947971] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 3.970951] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 3.978527] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 3.985069] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.991403] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.998278] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.007868] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.017349] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.024405] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 4.030540] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.036839] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.043704] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.053298] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.062798] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.069844] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.088217] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.094511] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.101381] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.110978] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.120469] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.127514] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.148847] smps9: Bringing 0uV into 2100000-2100000uV [ 4.177880] ldo9: bypassed regulator has no supply! [ 4.182999] ldo9: failed to get the current voltage(-517) [ 4.188691] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.208859] hctosys: unable to open rtc device (rtc0) [ 4.214149] sr_init: No PMIC hook to init smartreflex [ 4.219656] sr_init: platform driver register failed for SR [ 4.248012] pbias_mmc_omap5: disabling [ 4.251954] vmmcsdio_fixed: disabling [ 4.258101] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [omap5uevm 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:03]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:04]: Done. Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.517196] isl29018 7-0044: No cache defaults, reading back from HW [ 1.523551] isl29018 7-0044: Failed to read 1: -6 [ 1.528135] isl29018 7-0044: regmap initialization fails: -6 [ 1.538550] NET: Registered protocol family 10 [ 1.542978] sit: IPv6 over IPv4 tunneling driver [ 1.546561] NET: Registered protocol family 17 [ 1.550565] can: controller area network core (rev 20120528 abi 9) [ 1.556757] NET: Registered protocol family 29 [ 1.561143] can: raw protocol (rev 20120528) [ 1.565392] can: broadcast manager protocol (rev 20120528 t) [ 1.571033] can: netlink gateway (rev 20130117) max_hops=1 [ 1.576753] Key type dns_resolver registered [ 1.581076] ThumbEE CPU extension supported. [ 1.584983] Registering SWP/SWPB emulation handler [ 1.594858] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.600345] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.606705] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.612080] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.622147] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.632521] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.637957] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.648147] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.654328] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.659707] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.669428] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.691564] Waiting for root device /dev/mmcblk0p1... [ 1.695448] mmc0: tuning execution failed: -5 [ 1.699477] mmc0: error -5 whilst initialising MMC card [ 2.567227] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.581310] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.586773] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.593145] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.598529] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 02:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 02:08]: got exception: timeout ~$off
[PYBOOT] [pi 02:09]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.896220] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.907423] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.913894] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.919332] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.927805] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.942567] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.949321] hub 3-0:1.0: USB hub found [ 1.953130] hub 3-0:1.0: 1 port detected [ 1.963534] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.970159] [drm] No driver support for vblank timestamp query. [ 1.981868] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.989666] mmc2: switch to bus width 8 failed [ 1.995353] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.003835] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.013042] mmc2: switch to bus width 4 failed [ 2.013057] mmc2: new high speed MMC card at address 0001 [ 2.013536] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 2.013720] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 2.013914] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 2.015127] mmcblk2: p3 [ 2.016825] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 2.035435] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 2.038802] mmc0: new SDIO card at address 0001 [ 2.066951] Console: switching to colour frame buffer device 170x48 [ 2.130740] drm drm: fb0: frame buffer device [ 2.146527] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.153156] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 2.182193] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.195574] vdd_1v5: disabling [ 2.198655] vdd_1v2: disabling [ 2.754915] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.766331] Waiting for root device /dev/mmcblk0p3... [ 58.647825] random: nonblocking pool is initialized
[PYBOOT] [seaboard 01:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:56]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:58]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
VDDIO_HDMI: supplied by vdd_5v0 tegra-dc 54200000.dc: failed to probe RGB output: -517 utmi_phy_clk_enable: timeout waiting for phy to stabilize tegra-ehci c5000000.usb: EHCI Host Controller tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 mmc2: switch to bus width 8 failed mmc2: switch to bus width 4 failed mmc2: new high speed MMC card at address 0001 mmcblk2: mmc2:0001 MMC08G 7.46 GiB tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 hub 3-0:1.0: USB hub found mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB hub 3-0:1.0: 1 port detected mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] No driver support for vblank timestamp query. mmcblk2: p3 mmc0: queuing unknown CIS tuple 0x80 (50 bytes) mmc0: queuing unknown CIS tuple 0x80 (7 bytes) mmc0: queuing unknown CIS tuple 0x80 (7 bytes) mmc0: queuing unknown CIS tuple 0x80 (19 bytes) Console: switching to colour frame buffer device 170x48 drm drm: fb0: frame buffer device [drm] Initialized tegra 0.0.0 20120330 on minor 0 input: gpio-keys as /devices/soc0/gpio-keys/input/input2 tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) vdd_1v5: disabling vdd_1v2: disabling mmc0: queuing unknown CIS tuple 0x02 (1 bytes) mmc0: new SDIO card at address 0001 asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:51]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:52]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 4.440237] can: raw protocol (rev 20120528) [ 4.444504] can: broadcast manager protocol (rev 20120528 t) [ 4.450231] can: netlink gateway (rev 20130117) max_hops=1 [ 4.485856] Bluetooth: RFCOMM socket layer initialized [ 4.491043] Bluetooth: RFCOMM ver 1.11 [ 4.494827] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.500397] Bluetooth: BNEP socket layer initialized [ 4.505368] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.511387] Bluetooth: HIDP socket layer initialized [ 4.517400] Key type dns_resolver registered [ 4.523847] Registering SWP/SWPB emulation handler [ 4.544242] VDDIO_HDMI: supplied by vdd_5v0 [ 4.552528] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 4.566961] tegra-ehci c5000000.usb: EHCI Host Controller [ 4.572482] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 4.581003] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 4.605553] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 4.617191] hub 3-0:1.0: USB hub found [ 4.621059] hub 3-0:1.0: 1 port detected [ 4.639888] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.646556] [drm] No driver support for vblank timestamp query. [ 4.727024] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 4.790052] Console: switching to colour frame buffer device 170x48 [ 4.823934] drm drm: fb0: frame buffer device [ 4.855494] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 4.863006] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 4.870853] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:01 UTC (1230768001) [ 4.892646] vdd_1v5: disabling [ 4.895728] vdd_1v2: disabling [ 4.898892] ALSA device list: [ 4.901852] #0: NVIDIA Tegra Seaboard [ 4.906499] Waiting for root device /dev/mmcblk0p3... [ 61.638143] random: nonblocking pool is initialized
[PYBOOT] [seaboard 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:55]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:56]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
Debian GNU/Linux 7.0 snow ttySAC3
snow login: root root Password: root Unable to handle kernel paging request at virtual address c10b3658 pgd = c0204000 [c10b3658] *pgd=4100041e(bad) Internal error: Oops: 8000000d [#1] ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Tainted: G W 4.6.0-rc5-next-20160429 #1 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) task: c1005f30 ti: c1000000 task.ti: c1000000 PC is at 0xc10b3658 LR is at 0x0 pc : [<c10b3658>] lr : [<00000000>] psr: 600001d3 sp : c1001f88 ip : 00000000 fp : c10b4118 r10: 00000000 r9 : 00000001 r8 : 67a02015 r7 : 00000001 r6 : c10b41b8 r5 : c10b3660 r4 : c100212c r3 : 00010000 r2 : 00000006 r1 : 00000006 r0 : 00000001 Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none Control: 10c53c7d Table: 6d3a4059 DAC: 00000051 Process swapper (pid: 0, stack limit = 0xc1000218) Stack: (0xc1001f88 to 0xc1002000) 1f80: c1002134 c10fdf55 c1001fa4 c0a97d34 c1035fa8 c1000000 1fa0: c1001fac c0a97f34 c10b4118 c0358040 00000001 ffffffff 00000000 c0f00c44 1fc0: ffffffff ffffffff 00000000 c0f0068c 00000000 c0f8ba20 c11001d4 c10020b4 1fe0: c0f8ba1c c10070f8 40204059 410fc0f4 00000000 40208078 00000000 00000000 Code: 00000000 00000000 00000000 00000000 (c10b3660) ---[ end trace cb88537fdc8fa202 ]--- Kernel panic - not syncing: Attempted to kill the idle task! ---[ end Kernel panic - not syncing: Attempted to kill the idle task!
[PYBOOT] [snow 00:46]: got exception: panic ~$off
[PYBOOT] [snow 00:47]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.969879] can: controller area network core (rev 20120528 abi 9) [ 1.976196] NET: Registered protocol family 29 [ 1.980651] can: raw protocol (rev 20120528) [ 1.984954] can: broadcast manager protocol (rev 20120528 t) [ 1.990631] can: netlink gateway (rev 20130117) max_hops=1 [ 1.996978] Key type dns_resolver registered [ 2.001617] ThumbEE CPU extension supported. [ 2.005920] Registering SWP/SWPB emulation handler [ 2.018280] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.025421] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.034973] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.042022] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.049072] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.056091] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.073425] db8500-esram12: disabling [ 2.077270] db8500-esram34: disabling [ 2.081420] V-CSI/DSI: disabling [ 2.085815] mmci-reg: disabling [ 2.091827] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.097869] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.104522] Waiting for root device /dev/mmcblk0p4... [ 2.138854] mmc3: new high speed MMC card at address 0001 [ 2.145233] mmcblk3: mmc3:0001 3.53 GiB [ 2.149658] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.155456] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.161254] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.168182] mmcblk3: p1 p2 p3 p4 Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 02:15]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:16]: got exception: timeout ~$off
[PYBOOT] [snowball 02:18]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
sdhci-pltfm: SDHCI platform and OF driver helper ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered ThumbEE CPU extension supported. input: gpio_keys as /devices/soc0/gpio_keys/input/input0 rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 db8500-esram12: disabling db8500-esram34: disabling V-CSI/DSI: disabling mmci-reg: disabling uart-pl011 80007000.uart: DMA channel TX dma0chan20 uart-pl011 80007000.uart: DMA channel RX dma0chan21 Waiting for root device /dev/mmcblk0p4... mmc3: new high speed MMC card at address 0001 mmcblk3: mmc3:0001 3.53 GiB mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB mmcblk3rpmb: mmc3:0001 partition 3 128 KiB mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:03]: got exception: timeout ~$off
[PYBOOT] [snowball 02:05]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.518402] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.526184] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.558258] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.569091] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.584625] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.595581] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.629516] NET: Registered protocol family 10 [ 2.637451] sit: IPv6 over IPv4 tunneling driver [ 2.644470] NET: Registered protocol family 17 [ 2.649047] NET: Registered protocol family 35 [ 2.653961] NET: Registered protocol family 37 [ 2.658721] Registering SWP/SWPB emulation handler [ 2.679382] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.688049] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-10 04:25:25 UTC (955340725) [ 2.698272] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.705841] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.713226] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.720367] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.733917] db8500-esram12: disabling [ 2.737701] db8500-esram34: disabling [ 2.741668] V-CSI/DSI: disabling [ 2.744934] mmci-reg: disabling [ 2.748229] ALSA device list: [ 2.751190] #0: MOP500-card [ 2.754516] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.760498] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.766662] Waiting for root device /dev/mmcblk0p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:58]: got exception: timeout ~$off
[PYBOOT] [snowball 01:59]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 20.126496] mmcblk0: error -110 sending status command, retrying [ 20.134937] mmcblk0: error -110 sending status command, aborting [ 20.146002] mmcblk0: error -110 sending status command, retrying [ 20.154416] mmcblk0: error -110 sending status command, retrying [ 20.162893] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty"
INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: Id "2" respawning too fast: disabled for 5 minutes [ 20.212255] mmcblk0: error -110 sending status command, retrying [ 20.220734] mmcblk0: error -110 sending status command, retrying [ 20.229202] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/gett[ 20.240458] mmcblk0: error -110 sending status command, retrying y" INIT: Id "5" respawning too fas[ 20.249307] mmcblk0: error -110 sending status command, retrying t: disabled for 5 minutes [ 20.258526] mmcblk0: error -110 sending status command, aborting [ 20.269678] mmcblk0: error -110 sending status command, retrying [ 20.278139] mmcblk0: error -110 sending status command, retrying [ 20.286584] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: Id "S1" respawning too fast: disabled for 5 minutes [ 20.321701] mmcblk0: error -110 sending status command, retrying [ 20.330183] mmcblk0: error -110 sending status command, retrying [ 20.338674] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: Id "6" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 50.285284] random: nonblocking pool is initialized
[PYBOOT] [wandboard 02:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 02:56]: got exception: timeout ~$off
[PYBOOT] [wandboard 02:57]: Done.