Failed boards:
bbb multi_v7_defconfig : FAILED 1:22.53 panda multi_v7_defconfig : FAILED 1:34.65
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:12.27 arndale exynos_defconfig : passed 1:08.01 bbb omap2plus_defconfig : passed 1:36.97 beaver tegra_defconfig : passed 0:55.12 beaver multi_v7_defconfig : passed 0:52.46 capri bcm_defconfig : passed 0:43.45 capri multi_v7_defconfig : passed 0:43.60 cubie sunxi_defconfig : passed 0:53.23 cubie multi_v7_defconfig : passed 0:57.84 cubie2 sunxi_defconfig : passed 0:50.16 cubie2 multi_v7_defconfig : passed 1:10.37 cubie2 multi_lpae_defconfig : passed 0:52.52 cubox dove_defconfig : warnings 1:12.33 dalmore tegra_defconfig : passed 1:22.75 dalmore multi_v7_defconfig : passed 1:16.16 dalmore multi_lpae_defconfig : passed 1:17.00 panda omap2plus_defconfig : passed 1:17.32 sama5 sama5_defconfig : passed 1:53.29 seaboard tegra_defconfig : passed 1:06.21 seaboard multi_v7_defconfig : passed 1:08.79 snow exynos_defconfig : passed 1:20.85 snowball u8500_defconfig : passed 1:33.89 snowball multi_v7_defconfig : passed 2:06.00 trimslice tegra_defconfig : passed 0:59.19 trimslice multi_v7_defconfig : passed 1:02.86 wandboard imx_v6_v7_defconfig : passed 0:56.24 wandboard multi_v7_defconfig : passed 1:05.22
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board bbb-multi_v7_defconfig failure log: -------------------------------------------------
Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.117 Filename 'arm-soc/v3.13-rc5-714-g263b8a7/multi_v7_defconfig/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################### 1.2 MiB/s done Bytes transferred = 4350208 (426100 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x81f00000 arm-soc/v3.13-rc5-714-g263b8a7/multi_v7_defconfig/dtbs/am335x-boneblack.dtb tftp 0x81f00000 arm-soc/v3.13-rc5-714-g263b8a7/multi_v7_defconfig/dtbs/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.117 Filename 'arm-soc/v3.13-rc5-714-g263b8a7/multi_v7_defconfig/dtbs/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *## 545.9 KiB/s done Bytes transferred = 17911 (45f7 hex) U-Boot# setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f075f6
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board panda-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.422454] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.429870] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 1.441741] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.449401] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.456207] usbcore: registered new interface driver usbhid [ 1.462066] usbhid: USB HID core driver [ 1.469055] TCP: cubic registered [ 1.472534] NET: Registered protocol family 17 [ 1.477416] Key type dns_resolver registered [ 1.482269] Power Management for TI OMAP4+ devices. [ 1.487426] Power Management for TI OMAP4. [ 1.491729] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.498870] Registering SWP/SWPB emulation handler [ 1.504821] reg-fixed-voltage wl12xx_vmmc.10: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_gpio, deferring probe [ 1.517517] platform wl12xx_vmmc.10: Driver reg-fixed-voltage requests probe deferral [ 1.526123] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c1_pins, deferring probe [ 1.537628] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 1.545135] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c2_pins, deferring probe [ 1.556640] platform 48072000.i2c: Driver omap_i2c requests probe deferral [ 1.564147] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe [ 1.575653] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 1.583160] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe [ 1.594665] platform 48350000.i2c: Driver omap_i2c requests probe deferral [ 1.602478] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 1.610076] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 1.617706] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 1.617767] omap-dma-engine 4a056000.dma-controller: freeing channel for 61 [ 1.630859] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.638214] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.645904] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 1.657775] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.665527] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.674194] spear_cpufreq: Invalid cpufreq_tbl [ 1.678894] ALSA device list: [ 1.678894] No soundcards found. [ 1.686126] omap_uart 48020000.serial: no wakeirq for uart2 [ 1.692047] Waiting for root device /dev/mmcblk0p2... [ 1.697540] usb 1-1: new high-speed USB device number 2 using ehci-omap ~$off # PYBOOT: Exception: timeout