Full logs are available at http://arm-soc.lixom.net/bootlogs/arm-soc/v4.6-rc5-792-gbf7d0eb/
Failed boards:
arndale arm-multi_v7_nosmp_defconfig : FAILED 23:48.79 bbb arm-omap2plus_defconfig : FAILED 1:53.99 bbb arm-multi_v7_defconfig : FAILED 1:58.80 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:04.11 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:45.28 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:45.03 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:49.77 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 1:51.88 beaver arm-tegra_defconfig : FAILED 1:46.61 beaver arm-multi_v7_defconfig : FAILED 1:55.33 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:51.96 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:20.63 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.69 cosmic arm-multi_v7_defconfig : FAILED 2:12.94 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:13.16 dalmore arm-tegra_defconfig : FAILED 1:52.88 dalmore arm-multi_v7_defconfig : FAILED 2:00.96 dalmore arm-multi_lpae_defconfig : FAILED 2:00.06 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:54.93 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:53.43 omap5uevm arm-multi_v7_defconfig : FAILED 2:05.69 omap5uevm arm-multi_lpae_defconfig : FAILED 0:54.44 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 1:39.85 seaboard arm-tegra_defconfig : FAILED 1:51.00 seaboard arm-multi_v7_defconfig : FAILED 1:59.76 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:56.53 snow arm-multi_v7_nosmp_defconfig : FAILED 3:14.04 snowball arm-u8500_defconfig : FAILED 1:57.08 snowball arm-multi_v7_defconfig : FAILED 2:17.89 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:03.57
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:18.66 arndale arm-exynos_defconfig : passed 1:29.07 arndale arm-multi_v7_defconfig : passed 1:21.59 arndale arm-multi_lpae_defconfig : passed 1:34.19 capri arm-bcm_defconfig : passed 0:48.29 capri arm-multi_v7_defconfig : passed 1:03.64 capri arm-multi_v7_nosmp_defconfig : warnings 0:56.89 chitra powerpc-pasemi_defconfig : passed 2:11.80 chitra powerpc-ppc64_defconfig : passed 2:04.97 colombus arm-sunxi_defconfig : passed 2:28.63 colombus arm-multi_v7_defconfig : passed 2:49.33 colombus arm-multi_lpae_defconfig : passed 2:29.08 cubie arm-sunxi_defconfig : passed 0:49.94 cubie arm-multi_v7_defconfig : passed 0:51.26 cubie arm-multi_v7_nosmp_defconfig : passed 0:55.82 cubie2 arm-sunxi_defconfig : passed 1:01.12 cubie2 arm-multi_v7_defconfig : passed 0:58.20 cubie2 arm-multi_lpae_defconfig : passed 1:00.50 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:01.95 cubox arm-multi_v7_defconfig : passed 1:22.81 cubox arm-mvebu_v7_defconfig : passed 1:23.10 cubox arm-multi_v7_nosmp_defconfig : passed 1:17.60 hummingboard arm-imx_v6_v7_defconfig : passed 1:27.61 hummingboard arm-multi_v7_defconfig : passed 1:32.93 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:06.86 jetsontk1 arm-tegra_defconfig : warnings 1:35.40 jetsontk1 arm-multi_v7_defconfig : warnings 1:42.70 jetsontk1 arm-multi_lpae_defconfig : warnings 1:55.43 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:37.93 omap5uevm arm-omap2plus_defconfig : passed 1:03.97 pandaes arm-omap2plus_defconfig : warnings 1:38.11 pandaes arm-multi_v7_defconfig : passed 1:42.41 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:56.51 pi arm-exynos_defconfig : passed 2:09.61 pi arm-multi_v7_defconfig : passed 2:19.62 pi arm-multi_lpae_defconfig : passed 2:20.32 pit arm-exynos_defconfig : passed 2:10.90 pit arm-multi_v7_defconfig : passed 2:12.84 pit arm-multi_lpae_defconfig : passed 2:18.29 pit arm-multi_v7_nosmp_defconfig : warnings 2:11.17 seattle arm64-defconfig : warnings 2:18.48 snow arm-exynos_defconfig : passed 2:12.42 snow arm-multi_v7_defconfig : passed 2:07.44 snow arm-multi_lpae_defconfig : passed 1:59.89 trimslice arm-tegra_defconfig : warnings 1:31.36 trimslice arm-multi_v7_defconfig : warnings 1:39.82 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:48.75 wandboard arm-imx_v6_v7_defconfig : passed 1:19.57 wandboard arm-multi_v7_defconfig : passed 1:13.93 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:08.45
Offline boards:
colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:15.46 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:17.06 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:20.10 parallella arm-multi_v7_defconfig : OFFLINE 2:23.82 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:19.54 pi arm-multi_v7_nosmp_defconfig : OFFLINE 1:57.71 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:47.24 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:56.96 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:45.06 sama5 arm-sama5_defconfig : OFFLINE 2:18.31 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:22.34 socfpga arm-socfpga_defconfig : OFFLINE 2:15.50 socfpga arm-multi_v7_defconfig : OFFLINE 2:31.30 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.94
Board legend is available at http://arm-soc.lixom.net/boards.html
Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.594018] usb_phy_generic.0.auto supply vcc not found, using dummy regulator [ 1.600633] usb_phy_generic.1.auto supply vcc not found, using dummy regulator [ 1.607755] exynos-dwc3 usb_dwc3: no suspend clk specified [ 1.613196] usb_dwc3 supply vdd33 not found, using dummy regulator [ 1.619370] usb_dwc3 supply vdd10 not found, using dummy regulator [ 1.627417] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.632485] ehci-pci: EHCI PCI platform driver [ 1.636931] ehci-platform: EHCI generic platform driver [ 1.642254] ehci-omap: OMAP-EHCI Host Controller driver [ 1.647404] ehci-orion: EHCI orion driver [ 1.651397] SPEAr-ehci: EHCI SPEAr driver [ 1.655394] ehci-st: EHCI STMicroelectronics driver [ 1.660257] ehci-exynos: EHCI EXYNOS driver [ 1.664514] ehci-atmel: EHCI Atmel driver [ 1.668400] tegra-ehci: Tegra EHCI driver [ 1.672425] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.678486] ohci-pci: OHCI PCI platform driver [ 1.682936] ohci-platform: OHCI generic platform driver [ 1.688222] ohci-omap3: OHCI OMAP3 driver [ 1.692193] SPEAr-ohci: OHCI SPEAr driver [ 1.696189] ohci-st: OHCI STMicroelectronics driver [ 1.701051] ohci-atmel: OHCI Atmel driver [ 1.705333] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 1.710439] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 1 [ 1.718257] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.726757] xhci-hcd xhci-hcd.2.auto: irq 140, io mem 0x12000000 [ 1.733169] hub 1-0:1.0: USB hub found [ 1.736479] hub 1-0:1.0: 1 port detected [ 1.740566] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 1.745843] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2 [ 1.753511] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.761936] hub 2-0:1.0: USB hub found [ 1.765293] hub 2-0:1.0: 1 port detected [ 1.769475] usbcore: registered new interface driver usb-storage [ 1.776225] mousedev: PS/2 mouse device common for all mice [ 1. [PYBOOT] [arndale 23:42]: got exception: maximum recursion depth exceeded ~$off
[PYBOOT] [arndale 23:43]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.649300] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.659288] ledtrig-cpu: registered to indicate activity on CPUs [ 1.666388] usbcore: registered new interface driver usbhid [ 1.672309] usbhid: USB HID core driver [ 1.684533] NET: Registered protocol family 10 [ 1.691095] sit: IPv6 over IPv4 tunneling driver [ 1.697237] NET: Registered protocol family 17 [ 1.702016] can: controller area network core (rev 20120528 abi 9) [ 1.708666] NET: Registered protocol family 29 [ 1.713389] can: raw protocol (rev 20120528) [ 1.717908] can: broadcast manager protocol (rev 20120528 t) [ 1.723901] can: netlink gateway (rev 20130117) max_hops=1 [ 1.730646] Key type dns_resolver registered [ 1.735549] omap_voltage_late_init: Voltage driver support not added [ 1.743904] ThumbEE CPU extension supported. [ 1.748535] Registering SWP/SWPB emulation handler [ 1.790929] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.797464] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.805243] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.813942] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.821866] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.829729] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.837570] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.844956] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.853722] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.861639] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.871374] mmc1: new high speed MMC card at address 0001 [ 1.878652] hctosys: unable to open rtc device (rtc0) [ 1.891843] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.897863] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.904866] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.913731] mmcblk1: p1 p2 [ 1.919493] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:56]: got exception: timeout ~$off
[PYBOOT] [bbb 01:57]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.315586] sdhci: Secure Digital Host Controller Interface driver [ 1.322110] sdhci: Copyright(c) Pierre Ossman [ 1.327909] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.391012] Synopsys Designware Multimedia Card Interface Driver [ 1.398392] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.407539] ledtrig-cpu: registered to indicate activity on CPUs [ 1.414286] usbcore: registered new interface driver usbhid [ 1.420164] usbhid: USB HID core driver [ 1.429854] NET: Registered protocol family 10 [ 1.436352] sit: IPv6 over IPv4 tunneling driver [ 1.442232] NET: Registered protocol family 17 [ 1.446972] can: controller area network core (rev 20120528 abi 9) [ 1.453573] NET: Registered protocol family 29 [ 1.458273] can: raw protocol (rev 20120528) [ 1.462791] can: broadcast manager protocol (rev 20120528 t) [ 1.468769] can: netlink gateway (rev 20130117) max_hops=1 [ 1.475351] Key type dns_resolver registered [ 1.480159] omap_voltage_late_init: Voltage driver support not added [ 1.487958] ThumbEE CPU extension supported. [ 1.500604] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.508168] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.516209] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.523948] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.531636] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.539316] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.546605] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.554310] hctosys: unable to open rtc device (rtc0) [ 1.565089] Waiting for root device /dev/mmcblk0p2... [ 1.600284] mmc1: new high speed MMC card at address 0001 [ 1.606761] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.611831] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.618320] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.626765] mmcblk1: p1 p2
[PYBOOT] [bbb 02:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 02:02]: got exception: timeout ~$off
[PYBOOT] [bbb 02:03]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.052408] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.058524] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.064851] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.071725] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.081318] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.090816] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.097831] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.141235] ledtrig-cpu: registered to indicate activity on CPUs [ 2.149928] oprofile: using arm/armv7 [ 2.155072] Initializing XFRM netlink socket [ 2.160157] NET: Registered protocol family 10 [ 2.171029] sit: IPv6 over IPv4 tunneling driver [ 2.179810] NET: Registered protocol family 17 [ 2.184754] NET: Registered protocol family 15 [ 2.189992] Key type dns_resolver registered [ 2.194851] omap_voltage_late_init: Voltage driver support not added [ 2.201585] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.210050] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.220334] ThumbEE CPU extension supported. [ 2.224992] Registering SWP/SWPB emulation handler [ 2.230028] SmartReflex Class3 initialized [ 2.299673] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.307020] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.317586] mmc1: new high speed MMC card at address 0001 [ 2.329752] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.338096] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.345881] hctosys: unable to open rtc device (rtc0) [ 2.351336] sr_init: No PMIC hook to init smartreflex [ 2.357007] sr_init: platform driver register failed for SR [ 2.397657] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.405654] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.419936] mmcblk1: p1 p2 [ 2.437391] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.192843] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.199917] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.225943] rtc-ds1307 2-006f: SET TIME! [ 2.231694] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.238438] rtc-ds1307 2-006f: 64 bytes nvram [ 2.243055] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.251245] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.257027] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.265266] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.274426] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.281303] hub 1-0:1.0: USB hub found [ 2.285260] hub 1-0:1.0: 1 port detected [ 2.289654] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.295432] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.303528] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.312555] hub 2-0:1.0: USB hub found [ 2.316522] hub 2-0:1.0: 1 port detected [ 2.322604] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.356539] vdd_3v3: supplied by regen1 [ 2.394682] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.412641] aic_dvdd_fixed: disabling [ 2.417368] Waiting for root device /dev/mmcblk0p1... [ 2.444544] mmc1: new high speed MMC card at address 0001 [ 2.450521] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.455393] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.461742] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.468627] mmcblk1: p1 [ 2.595443] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.630468] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.655639] hub 2-1:1.0: USB hub found [ 2.659620] hub 2-1:1.0: 4 ports detected [ 2.751666] hub 1-1:1.0: USB hub found [ 2.755646] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:48]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:49]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.192957] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.200020] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.226081] rtc-ds1307 2-006f: SET TIME! [ 2.231834] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.238580] rtc-ds1307 2-006f: 64 bytes nvram [ 2.243187] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.251386] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.257163] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.265388] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.274541] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.281420] hub 1-0:1.0: USB hub found [ 2.285368] hub 1-0:1.0: 1 port detected [ 2.289751] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.295521] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.303611] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.312619] hub 2-0:1.0: USB hub found [ 2.316580] hub 2-0:1.0: 1 port detected [ 2.322639] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.356672] vdd_3v3: supplied by regen1 [ 2.395614] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.412522] aic_dvdd_fixed: disabling [ 2.417123] Waiting for root device /dev/mmcblk0p1... [ 2.447632] mmc1: new high speed MMC card at address 0001 [ 2.453595] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.458487] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.464820] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.471692] mmcblk1: p1 [ 2.595572] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.630597] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.655756] hub 2-1:1.0: USB hub found [ 2.659729] hub 2-1:1.0: 4 ports detected [ 2.751743] hub 1-1:1.0: USB hub found [ 2.755722] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:42]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:43]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:44]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 2.017713] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.024754] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.050132] rtc-ds1307 2-006f: SET TIME! [ 2.055753] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.062452] rtc-ds1307 2-006f: 64 bytes nvram [ 2.067034] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.074397] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.080169] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.088363] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.097500] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.104231] hub 1-0:1.0: USB hub found [ 2.108185] hub 1-0:1.0: 1 port detected [ 2.112496] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.118257] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.126335] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.135201] hub 2-0:1.0: USB hub found [ 2.139145] hub 2-0:1.0: 1 port detected [ 2.144404] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.180334] vdd_3v3: supplied by regen1 [ 2.211462] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.224381] aic_dvdd_fixed: disabling [ 2.229759] Waiting for root device /dev/mmcblk0p1... [ 2.276669] mmc1: new high speed MMC card at address 0001 [ 2.282547] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.287376] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.293675] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.300467] mmcblk1: p1 [ 2.419670] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.449688] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.478437] hub 2-1:1.0: USB hub found [ 2.482417] hub 2-1:1.0: 4 ports detected [ 2.574440] hub 1-1:1.0: USB hub found [ 2.578414] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:49]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:51]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.667360] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.674227] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.684623] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.689485] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.695788] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.702647] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.712239] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.721738] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.728797] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.777336] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.783636] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.790506] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.800095] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.809586] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.816625] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.822749] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.829056] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.835900] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.845496] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.854991] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.862031] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.868673] vdd_3v3: supplied by regen1 [ 2.907459] hctosys: unable to open rtc device (rtc0) [ 2.912759] sr_init: No PMIC hook to init smartreflex [ 2.918270] sr_init: platform driver register failed for SR [ 2.959037] mmc1: new high speed MMC card at address 0001 [ 2.965862] aic_dvdd_fixed: disabling [ 2.966967] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.967726] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.968514] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.978151] mmcblk1: p1 [ 2.989933] ldousb: disabling [ 2.995956] Waiting for root device /dev/mmcblk0p1...
[PYBOOT] [beagleboard-x15 01:42]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:43]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:44]: Done. Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.348527] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.354109] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.361203] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.371205] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.380669] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.386178] vdd_1v8_gen: supplied by vdd_5v_in [ 3.392637] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.399258] [drm] No driver support for vblank timestamp query. [ 3.405207] drm drm: No connectors reported connected with modes [ 3.411214] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.436582] Console: switching to colour frame buffer device 128x48 [ 3.448860] drm drm: fb0: frame buffer device [ 3.463482] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.472154] usb3_vbus: supplied by vdd_5v_in [ 3.478630] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.485089] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.490499] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.498334] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.513495] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.520373] hub 1-0:1.0: USB hub found [ 3.524166] hub 1-0:1.0: 1 port detected [ 3.529109] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.534526] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.542268] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.553488] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.560258] hub 2-0:1.0: USB hub found [ 3.564026] hub 2-0:1.0: 1 port detected [ 3.575015] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.588652] vdd_sata,avdd_plle: disabling [ 3.593441] usb1_vbus: disabling [ 3.597540] Waiting for root device /dev/mmcblk0p1... [ 3.873493] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.812012] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:53]: got exception: timeout ~$off
[PYBOOT] [beaver 01:54]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 3.297742] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.303325] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.309927] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.319919] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.329086] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.334560] vdd_1v8_gen: supplied by vdd_5v_in [ 3.340257] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.346868] [drm] No driver support for vblank timestamp query. [ 3.352797] drm drm: No connectors reported connected with modes [ 3.358797] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.378088] Console: switching to colour frame buffer device 128x48 [ 3.389867] drm drm: fb0: frame buffer device [ 3.394305] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.402190] usb3_vbus: supplied by vdd_5v_in [ 3.408438] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.414883] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.420287] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.428004] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.442834] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.449196] hub 1-0:1.0: USB hub found [ 3.452960] hub 1-0:1.0: 1 port detected [ 3.457607] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.463014] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.470670] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.482831] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.489097] hub 2-0:1.0: USB hub found [ 3.492855] hub 2-0:1.0: 1 port detected [ 3.500370] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.513441] vdd_sata,avdd_plle: disabling [ 3.517834] usb1_vbus: disabling [ 3.521758] Waiting for root device /dev/mmcblk0p1... [ 3.802836] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.741377] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:50]: got exception: timeout ~$off
[PYBOOT] [beaver 01:51]: Done. Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 3.664025] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.674031] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.682902] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.688421] vdd_1v8_gen: supplied by vdd_5v_in [ 3.696909] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.703544] [drm] No driver support for vblank timestamp query. [ 3.709544] drm drm: No connectors reported connected with modes [ 3.715569] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.741362] Console: switching to colour frame buffer device 128x48 [ 3.753218] drm drm: fb0: frame buffer device [ 3.780519] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.788038] usb3_vbus: supplied by vdd_5v_in [ 3.794151] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.800618] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.806040] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.814025] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.830525] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.838254] hub 1-0:1.0: USB hub found [ 3.842051] hub 1-0:1.0: 1 port detected [ 3.846869] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.852312] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.860190] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.880516] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.888101] hub 2-0:1.0: USB hub found [ 3.891885] hub 2-0:1.0: 1 port detected [ 3.900197] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.918923] vdd_sata,avdd_plle: disabling [ 3.923424] usb1_vbus: disabling [ 3.926853] ALSA device list: [ 3.929811] #0: NVIDIA Tegra Beaver [ 3.934052] Waiting for root device /dev/mmcblk0p1... [ 4.210520] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 5.195984] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:45]: got exception: timeout ~$off
[PYBOOT] [beaver 01:46]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 41.825867] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 41.840221] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 85.344381] random: dd urandom read with 58 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 89.761026] eth0: device MAC address 1e:5e:67:dd:4a:db [ 89.917271] RX IPC Checksum Offload disabled [ 89.921897] No MAC Management Counters available [ 89.927671] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/1e:5e:67:dd:4a:db Sending on LPF/eth0/1e:5e:67:dd:4a:db Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 18
[PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 03:18]: got exception: timeout ~$off
[PYBOOT] [colombus 03:20]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.496472] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.570715] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.581042] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.655239] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.665569] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.739827] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.750159] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.824362] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.834695] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.908945] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.919301] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.993606] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 39.003941] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.078213] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.088543] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.162739] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.173067] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.247319] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.257646] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.331891] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.342217] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.416465] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.426814] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.501158] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.511482] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.585672] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.596000] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.670241] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.680571] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.754776] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.765100] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.839344] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.849671] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:01]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.088628] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.162608] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.172686] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.246677] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.256755] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.330735] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.340816] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.414804] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.424885] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.498876] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.508954] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.582937] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.593008] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.666997] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.677069] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.751056] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.761128] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.835118] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.845202] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.919188] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.929264] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.003249] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.013325] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.087310] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.097384] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.171369] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.181445] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.255425] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.265505] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.339492] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.349573] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.423552] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.433632] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:09]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:10]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:11]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 13.878084] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 17.951998] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 17.962049] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.035979] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.046030] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.119947] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.130003] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.203916] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.213977] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.287892] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.297952] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.371871] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.381932] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.455850] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.465915] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.539829] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.549881] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.623792] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.633838] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.707746] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.717792] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.791702] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.801748] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.875657] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.885721] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 66.959634] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 66.969687] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.043603] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.053661] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.127581] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.137635] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.211547] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.221607] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:09]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:10]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:12]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.686631] Key type dns_resolver registered [ 2.693055] ThumbEE CPU extension supported. [ 2.697477] Registering SWP/SWPB emulation handler [ 2.744947] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.750228] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.758078] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.774619] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.781425] [drm] No driver support for vblank timestamp query. [ 2.795304] mmc1: new high speed MMC card at address 0001 [ 2.804653] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.812654] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.821158] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.830595] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.841146] mmcblk1: p1 [ 2.959938] Console: switching to colour frame buffer device 240x75 [ 3.046434] drm drm: fb0: frame buffer device [ 3.066351] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.076499] usb2_vbus: supplied by vdd-sys-5v0 [ 3.087416] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.093020] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.101954] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.116388] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.126699] hub 1-0:1.0: USB hub found [ 3.130783] hub 1-0:1.0: 1 port detected [ 3.141708] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.155768] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.218466] dvdd_ts: disabling [ 3.221684] usb1_vbus: disabling [ 3.224942] vdd_cam_1v8_reg: disabling [ 3.232819] Waiting for root device /dev/mmcblk0p1... [ 3.441394] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.398313] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 61.044774] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:58]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:59]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.686307] Key type dns_resolver registered [ 2.692751] ThumbEE CPU extension supported. [ 2.697179] Registering SWP/SWPB emulation handler [ 2.724720] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.732951] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.743468] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.759796] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.766576] [drm] No driver support for vblank timestamp query. [ 2.791925] mmc1: new high speed MMC card at address 0001 [ 2.801953] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.809837] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.818506] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.828041] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.839600] mmcblk1: p1 [ 2.944054] Console: switching to colour frame buffer device 240x75 [ 3.030646] drm drm: fb0: frame buffer device [ 3.048807] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.058685] usb2_vbus: supplied by vdd-sys-5v0 [ 3.070552] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.076151] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.085910] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.098750] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.109182] hub 1-0:1.0: USB hub found [ 3.113227] hub 1-0:1.0: 1 port detected [ 3.123302] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.137071] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.199153] dvdd_ts: disabling [ 3.202251] usb1_vbus: disabling [ 3.205606] vdd_cam_1v8_reg: disabling [ 3.213053] Waiting for root device /dev/mmcblk0p1... [ 3.423753] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.406748] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.628710] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:59]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:00]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 2.222607] can: broadcast manager protocol (rev 20120528 t) [ 2.228363] can: netlink gateway (rev 20130117) max_hops=1 [ 2.235118] Key type dns_resolver registered [ 2.240230] ThumbEE CPU extension supported. [ 2.272154] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.277099] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.287191] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.309273] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.315957] [drm] No driver support for vblank timestamp query. [ 2.479852] Console: switching to colour frame buffer device 240x75 [ 2.567961] drm drm: fb0: frame buffer device [ 2.572691] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.580844] usb2_vbus: supplied by vdd-sys-5v0 [ 2.588534] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.594088] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.601987] mmc1: new high speed MMC card at address 0001 [ 2.608646] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.613674] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.620466] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.626549] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.632961] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.639747] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.646848] mmcblk1: p1 [ 2.651796] hub 1-0:1.0: USB hub found [ 2.658792] hub 1-0:1.0: 1 port detected [ 2.668488] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.679867] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.721380] dvdd_ts: disabling [ 2.724469] usb1_vbus: disabling [ 2.727780] vdd_cam_1v8_reg: disabling [ 2.733267] Waiting for root device /dev/mmcblk0p1... [ 2.975219] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.928323] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f
[PYBOOT] [dalmore 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:53]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:54]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 2.869159] Bluetooth: RFCOMM ver 1.11 [ 2.873098] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.878492] Bluetooth: BNEP socket layer initialized [ 2.883580] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.889579] Bluetooth: HIDP socket layer initialized [ 2.896546] Key type dns_resolver registered [ 2.906072] Registering SWP/SWPB emulation handler [ 2.936420] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.942724] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.951362] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.975825] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.982629] [drm] No driver support for vblank timestamp query. [ 3.160816] Console: switching to colour frame buffer device 240x75 [ 3.247224] drm drm: fb0: frame buffer device [ 3.281811] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.289025] usb2_vbus: supplied by vdd-sys-5v0 [ 3.297480] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.303290] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.312443] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.331815] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.345975] hub 1-0:1.0: USB hub found [ 3.349931] hub 1-0:1.0: 1 port detected [ 3.364047] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.380120] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.475144] dvdd_ts: disabling [ 3.478248] usb1_vbus: disabling [ 3.481632] vdd_cam_1v8_reg: disabling [ 3.486302] ALSA device list: [ 3.489293] #0: NVIDIA Tegra Dalmore [ 3.495193] Waiting for root device /dev/mmcblk0p1... [ 3.671813] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.697215] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.777596] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:50]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:51]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.704122] usbhid: USB HID core driver [ 1.712485] NET: Registered protocol family 10 [ 1.713082] sit: IPv6 over IPv4 tunneling driver [ 1.718126] NET: Registered protocol family 17 [ 1.721371] NET: Registered protocol family 15 [ 1.725842] Key type dns_resolver registered [ 1.730171] Registering SWP/SWPB emulation handler [ 1.735960] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.740413] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.747831] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.767324] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.771597] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.778515] max98090 1-0010: MAX98090 REVID=0x43 [ 1.780799] max98090 1-0010: use default 2.8v micbias [ 1.783313] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 1.783319] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.783929] hub 1-3:1.0: USB hub found [ 1.784110] hub 1-3:1.0: 3 ports detected [ 1.811101] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.815276] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.825546] mmc1: new DDR MMC card at address 0001 [ 1.830529] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.834725] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.840626] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.846531] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.852004] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.862161] mmcblk1: p1 p2 [ 1.870456] VDD10_HDMI_1.0V: disabling [ 1.871163] vdd_g3d: disabling [ 1.872232] BUCK8_2.8V: disabling [ 1.876277] ALSA device list: [ 1.877846] #0: Odroid-U3 [ 1.881631] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:51]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:52]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.149157] r10: c11a583c r9 : 0000011d r8 : 00000000 [ 2.154622] r7 : c1141d18 r6 : c0ee2880 r5 : ee042700 r4 : 2d490684 [ 2.161457] r3 : 0000006d r2 : 00000067 r1 : c0ee2881 r0 : 00000001 [ 2.168282] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 2.175752] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.181759] Process swapper/0 (pid: 1, stack limit = 0xee05a220) [ 2.188045] Stack: (0xee05bee0 to 0xee05c000) [ 2.192612] bee0: c13c0670 c1306890 ee6a0500 c077d9b0 c13c0670 c077da34 c13c065c c1306890 [ 2.201172] bf00: c1306890 c0301e74 c0c07b38 00000014 00000000 00002000 cccccc00 c04645ac [ 2.209732] bf20: 00000000 d000c133 0000058c c102946c c0c1d12c c035c2c8 cccccccd 00000000 [ 2.218290] bf40: c0ed1568 00000000 00000007 00000007 c1336d84 00000000 5000c120 00000007 [ 2.226847] bf60: c11a5838 c1412000 c1412000 c11a583c 00000000 c1100db4 00000007 00000007 [ 2.235409] bf80: 00000000 c11005a4 00000000 c0b67fbc 00000000 00000000 00000000 00000000 [ 2.243970] bfa0: 00000000 c0b67fc4 00000000 c0307eb8 00000000 00000000 00000000 00000000 [ 2.252531] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.261097] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 4899c0cd e9d998e8 [ 2.269677] [<c058d418>] (kset_find_obj) from [<c077d9b0>] (driver_find+0x14/0x30) [ 2.277608] [<c077d9b0>] (driver_find) from [<c077da34>] (driver_register+0x68/0xf8) [ 2.285718] [<c077da34>] (driver_register) from [<c0301e74>] (do_one_initcall+0x90/0x1d8) [ 2.294285] [<c0301e74>] (do_one_initcall) from [<c1100db4>] (kernel_init_freeable+0x15c/0x1fc) [ 2.303395] [<c1100db4>] (kernel_init_freeable) from [<c0b67fc4>] (kernel_init+0x8/0x114) [ 2.311958] [<c0b67fc4>] (kernel_init) from [<c0307eb8>] (ret_from_fork+0x14/0x3c) [ 2.319886] Code: e5954000 e1550004 e2444004 0a00000a (e5940000) [ 2.326265] Internal error: Oops: 5 [#2] SMP ARM [ 2.326305] ---[ end trace bb9542994cf09a77 ]--- [ 2.326321] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.326321] [ 2.345480] Modules linked in: [ 2.348679] CPU: 1 PID: 7 Comm: rcu_sched Tainted: G D 4.6.0-rc5-00792-gbf7d0eb #1 [ 2.357785] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.364068] task: ee06df80 ti: ee088000 task.ti: ee088000 [ 2.369720] PC is at set_next_entity+0x8/0xb38 [ 2.374372] LR is at pick_next_task_fair+0xbc/0x184 [ 2.379478] pc : [<c036f058>] lr : [<c0371e8c>] psr: 60000093 [ 2.379478] sp : ee089e44 ip : 00000001 fp : ee089ec4
[PYBOOT] [omap5uevm 00:50]: got exception: panic ~$off
[PYBOOT] [omap5uevm 00:51]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.760558] ledtrig-cpu: registered to indicate activity on CPUs [ 1.764301] usb 1-3: new high-speed USB device number 2 using ehci-omap [ 1.774073] usbcore: registered new interface driver usbhid [ 1.779912] usbhid: USB HID core driver [ 1.788581] NET: Registered protocol family 10 [ 1.793716] sit: IPv6 over IPv4 tunneling driver [ 1.799019] NET: Registered protocol family 17 [ 1.803683] can: controller area network core (rev 20120528 abi 9) [ 1.810188] NET: Registered protocol family 29 [ 1.814847] can: raw protocol (rev 20120528) [ 1.819322] can: broadcast manager protocol (rev 20120528 t) [ 1.825258] can: netlink gateway (rev 20130117) max_hops=1 [ 1.831285] Key type dns_resolver registered [ 1.835846] omap_vc_init_channel: No PMIC info for vdd_core [ 1.841676] omap_vp_init: No PMIC info for vdd_core [ 1.846775] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.852423] omap_vp_init: No PMIC info for vdd_mm [ 1.857347] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.863078] omap_vp_init: No PMIC info for vdd_mpu [ 1.868617] Power Management for TI OMAP4+ devices. [ 1.873853] ThumbEE CPU extension supported. [ 1.878353] Registering SWP/SWPB emulation handler [ 1.885393] palmas 0-0048: Irq flag is 0x00000000 [ 1.912003] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.922748] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.934024] mmc0: new high speed MMC card at address 0001 [ 1.940035] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.944936] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.951317] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.985170] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.010061] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.051129] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ [ 2 . 0259.2085592] 85U]na bUlneab le to handle kernel NULL pointer dereference at virtual address 00000010
[PYBOOT] [omap5uevm 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:03]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:05]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 48.701371] [<c031a0f8>] (__do_kernel_fault.part.0) from [<c03156e8>] (do_page_fault+0x36c/0x378) [ 48.710671] [<c03156e8>] (do_page_fault) from [<c0301238>] (do_DataAbort+0x38/0xb4) [ 48.718684] [<c0301238>] (do_DataAbort) from [<c030bea0>] (__dabt_svc+0x40/0x60) [ 48.726421] Exception stack(0xee4fac80 to 0xee4facc8) [ 48.731701] ac80: ee482200 ee482200 ffffffff 00000000 00000000 ee482200 c1036198 ee48242c [ 48.740259] aca0: c0a8bae4 00000001 c1007760 ee4fad04 ee483338 ee4facd0 c03495c0 c034d8f8 [ 48.748809] acc0: 20000193 ffffffff [ 48.752459] [<c030bea0>] (__dabt_svc) from [<c034d8f8>] (kthread_data+0x4/0xc) [ 48.760013] [<c034d8f8>] (kthread_data) from [<c03495c0>] (wq_worker_sleeping+0x8/0xb0) [ 48.768393] [<c03495c0>] (wq_worker_sleeping) from [<c0a8b900>] (__schedule+0x2bc/0x45c) [ 48.776864] [<c0a8b900>] (__schedule) from [<c0a8bae4>] (schedule+0x44/0x9c) [ 48.784243] [<c0a8bae4>] (schedule) from [<c0337500>] (do_exit+0x7c4/0x938) [ 48.791529] [<c0337500>] (do_exit) from [<c030b7e8>] (die+0x370/0x3d8) [ 48.798363] [<c030b7e8>] (die) from [<c031a0f8>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 48.806648] [<c031a0f8>] (__do_kernel_fault.part.0) from [<c03156e8>] (do_page_fault+0x36c/0x378) [ 48.815937] [<c03156e8>] (do_page_fault) from [<c0301238>] (do_DataAbort+0x38/0xb4) [ 48.823951] [<c0301238>] (do_DataAbort) from [<c030bea0>] (__dabt_svc+0x40/0x60) [ 48.831687] Exception stack(0xee4faeb8 to 0xee4faf00) [ 48.836960] aea0: ee482200 ee482200 [ 48.845513] aec0: ffffffff 00000000 00000000 ee482200 c1036198 ee48242c c0a8bae4 00000001 [ 48.854073] aee0: c1007760 ee4faf3c ee483338 ee4faf08 c03495c0 c034d8f8 20000193 ffffffff [ 48.862630] [<c030bea0>] (__dabt_svc) from [<c034d8f8>] (kthread_data+0x4/0xc) [ 48.870189] [<c034d8f8>] (kthread_data) from [<c03495c0>] (wq_worker_sleeping+0x8/0xb0) [ 48.878561] [<c03495c0>] (wq_worker_sleeping) from [<c0a8b900>] (__schedule+0x2bc/0x45c) [ 48.887032] [<c0a8b900>] (__schedule) from [<c0a8bae4>] (schedule+0x44/0x9c) [ 48.894407] [<c0a8bae4>] (schedule) from [<c0337500>] (do_exit+0x7c4/0x938) [ 48.901689] [<c0337500>] (do_exit) from [<c030b7e8>] (die+0x370/0x3d8) [ 48.908517] [<c030b7e8>] (die) from [<c031a0f8>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 48.916807] [<c031a0f8>] (__do_kernel_fault.part.0) from [<c03156e8>] (do_page_fault+0x36c/0x378) [ 48.926086] [<c03156e8>] (do_page_fault) from [<c0301238>] (do_DataAbort+0x38/0xb4) [ 48.934092] [<c0301238>] (do_DataAbort) from [<c030bea0>] (__dabt_svc+0x40/0x60) [ 48.941833] Exception stack(0xee4fb0f0 to 0xee4fb138) [ 48.947117] b0e0: ee482200 ee482200 ffffffff 00000000 [ 48.955676] b100: 00000000 ee482200 c1036198 ee48242c c0a8bae4 00000001 c1007760 ee4fb174 [ 48.964235] b120: ee483338 ee4fb140 c03495c0 c034d8f8 20000193 ffffffff [ 48.971158] [<c030bea0>] (__dabt_svc) [PYBOOT] [omap5uevm 01:37]: got exception: panic ~$off
[PYBOOT] [omap5uevm 01:38]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.842767] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.853271] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.859756] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.865177] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.873677] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.889054] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.896065] hub 3-0:1.0: USB hub found [ 1.900552] hub 3-0:1.0: 1 port detected [ 1.905605] mmc2: switch to bus width 8 failed [ 1.912649] mmc2: switch to bus width 4 failed [ 1.917164] mmc2: new high speed MMC card at address 0001 [ 1.923806] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.928743] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.934950] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.936049] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.936052] [drm] No driver support for vblank timestamp query. [ 1.954776] mmcblk2: p3 [ 1.975408] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.989263] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.992143] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.999508] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 2.018668] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 2.023088] mmc0: new SDIO card at address 0001 [ 2.045940] Console: switching to colour frame buffer device 170x48 [ 2.095606] drm drm: fb0: frame buffer device [ 2.114048] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.120856] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 2.150144] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.164429] vdd_1v5: disabling [ 2.167484] vdd_1v2: disabling [ 2.783612] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.795049] Waiting for root device /dev/mmcblk0p3... [ 58.755576] random: nonblocking pool is initialized
[PYBOOT] [seaboard 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:57]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:58]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.792831] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.799162] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.809074] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.815527] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.820941] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.828696] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.844136] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.850714] hub 3-0:1.0: USB hub found [ 1.854553] hub 3-0:1.0: 1 port detected [ 1.865326] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.871960] [drm] No driver support for vblank timestamp query. [ 1.878785] mmc2: switch to bus width 8 failed [ 1.883494] mmc2: switch to bus width 4 failed [ 1.887968] mmc2: new high speed MMC card at address 0001 [ 1.894148] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.907056] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.913880] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.915157] mmcblk2: p3 [ 1.930216] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.937851] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.940603] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.947618] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.979526] Console: switching to colour frame buffer device 170x48 [ 1.998812] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 2.035372] drm drm: fb0: frame buffer device [ 2.039842] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.046337] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 2.053346] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.065326] vdd_1v5: disabling [ 2.068401] vdd_1v2: disabling [ 2.074138] mmc0: new SDIO card at address 0001 [ 2.742505] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.753377] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:54]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:56]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 1.785352] Bluetooth: RFCOMM ver 1.11 [ 1.785390] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.785420] Bluetooth: BNEP socket layer initialized [ 1.785432] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.785459] Bluetooth: HIDP socket layer initialized [ 1.786022] Key type dns_resolver registered [ 1.787169] Registering SWP/SWPB emulation handler [ 1.813107] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.813656] VDDIO_HDMI: supplied by vdd_5v0 [ 1.813918] vdd_sys: supplied by vdd_5v0 [ 1.814027] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.814287] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.814840] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.818862] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.818893] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.818959] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.819483] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.840069] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.844592] hub 3-0:1.0: USB hub found [ 1.844655] hub 3-0:1.0: 1 port detected [ 1.857898] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.857901] [drm] No driver support for vblank timestamp query. [ 2.015081] Console: switching to colour frame buffer device 170x48 [ 2.034852] drm drm: fb0: frame buffer device [ 2.060063] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.067258] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.096999] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.116382] vdd_1v5: disabling [ 2.119435] vdd_1v2: disabling [ 2.122641] ALSA device list: [ 2.125602] #0: NVIDIA Tegra Seaboard [ 2.490705] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.501951] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:49]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:50]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 3.123088] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended [ 3.131439] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 4.164646] random: dd urandom read with 58 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
Cannot find device "eth0" Bind socket to interface: No such device Failed to bring up eth0. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting system message bus: dbus[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone (none). [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
[PYBOOT] [snow 03:11]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snow 03:12]: got exception: timeout ~$off
[PYBOOT] [snow 03:13]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.976074] can: controller area network core (rev 20120528 abi 9) [ 1.982421] NET: Registered protocol family 29 [ 1.986907] can: raw protocol (rev 20120528) [ 1.991210] can: broadcast manager protocol (rev 20120528 t) [ 1.996917] can: netlink gateway (rev 20130117) max_hops=1 [ 2.003295] Key type dns_resolver registered [ 2.007934] ThumbEE CPU extension supported. [ 2.012268] Registering SWP/SWPB emulation handler [ 2.025054] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.032196] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.041778] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.048858] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.055877] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.062896] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.080200] db8500-esram12: disabling [ 2.084075] db8500-esram34: disabling [ 2.088195] V-CSI/DSI: disabling [ 2.092590] mmci-reg: disabling [ 2.098693] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.104736] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.111389] Waiting for root device /dev/mmcblk0p4... [ 2.143920] mmc3: new high speed MMC card at address 0001 [ 2.150268] mmcblk3: mmc3:0001 3.53 GiB [ 2.154693] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.160522] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.166320] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.173217] mmcblk3: p1 p2 p3 p4 Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 02:14]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:15]: got exception: timeout ~$off
[PYBOOT] [snowball 02:16]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.903045] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.910583] ledtrig-cpu: registered to indicate activity on CPUs [ 1.916809] usbcore: registered new interface driver usbhid [ 1.922393] usbhid: USB HID core driver [ 1.929748] NET: Registered protocol family 10 [ 1.985076] sit: IPv6 over IPv4 tunneling driver [ 1.990264] NET: Registered protocol family 17 [ 1.994720] can: controller area network core (rev 20120528 abi 9) [ 2.000946] NET: Registered protocol family 29 [ 2.005401] can: raw protocol (rev 20120528) [ 2.009674] can: broadcast manager protocol (rev 20120528 t) [ 2.015350] can: netlink gateway (rev 20130117) max_hops=1 [ 2.021270] Key type dns_resolver registered [ 2.025756] ThumbEE CPU extension supported. [ 2.080108] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.094818] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.103912] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.110900] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.117889] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.124877] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.136566] db8500-esram12: disabling [ 2.184356] db8500-esram34: disabling [ 2.208099] V-CSI/DSI: disabling [ 2.219329] mmci-reg: disabling [ 2.222930] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.228912] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.244079] Waiting for root device /dev/mmcblk0p4... [ 3.037872] mmc3: new high speed MMC card at address 0001 [ 3.049713] mmcblk3: mmc3:0001 3.53 GiB [ 3.059844] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.069366] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.083892] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.095703] mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 02:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:01]: got exception: timeout ~$off
[PYBOOT] [snowball 02:02]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.662750] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.673797] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.689239] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.700317] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.734985] NET: Registered protocol family 10 [ 2.743041] sit: IPv6 over IPv4 tunneling driver [ 2.750030] NET: Registered protocol family 17 [ 2.754974] NET: Registered protocol family 35 [ 2.759765] NET: Registered protocol family 37 [ 2.764770] Registering SWP/SWPB emulation handler [ 2.780120] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.788635] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.795318] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.808013] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-10 16:18:27 UTC (955383507) [ 2.817382] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.824401] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.831420] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.838409] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.852813] db8500-esram12: disabling [ 2.856567] db8500-esram34: disabling [ 2.860473] V-CSI/DSI: disabling [ 2.863830] mmci-reg: disabling [ 2.867156] ALSA device list: [ 2.870117] #0: MOP500-card [ 2.873535] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.879486] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.885742] Waiting for root device /dev/mmcblk0p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:54]: got exception: timeout ~$off
[PYBOOT] [snowball 01:55]: Done.