arm-soc boot: 39 pass, 4 fail (v3.14-rc3-505-g74b2668) - Kernel-build-reports

28 Feb 2014


      Automated DT boot report for various ARM defconfigs.
Tree/Branch: arm-soc
Git describe: v3.14-rc3-505-g74b2668
Failed boot tests (console logs at the end)
===========================================
       sun7i-a20-cubieboard2:     FAIL:    sunxi_defconfig
        sun4i-a10-cubieboard:     FAIL:    sunxi_defconfig
  armada-xp-openblocks-ax3-4:     FAIL:    mvebu_v7_defconfig
             omap3-beagle-xm:     FAIL:    multi_v7_defconfig
Full Report
===========
da8xx_omapl_defconfig
---------------------
                   da850-evm     PASS:    0 min 15.6 sec
omap2plus_defconfig
-------------------
               legacy,3730xm     PASS:    0 min 52.3 sec
            am335x-boneblack     PASS:    0 min 26.0 sec
             omap3-beagle-xm     PASS:    0 min 55.9 sec
           legacy,3530beagle     PASS:    0 min 43.1 sec
                 omap4-panda     PASS:    1 min  7.2 sec
            omap3-overo-tobi     PASS:    0 min 23.0 sec
                 am335x-bone     PASS:    0 min 27.6 sec
      omap3-overo-storm-tobi     PASS:    0 min 25.4 sec
              omap4-panda-es     PASS:    1 min  6.8 sec
            legacy,3730storm     PASS:    0 min 23.6 sec
            legacy,3530overo     PASS:    0 min 21.5 sec
multi_lpae_defconfig
--------------------
       sun7i-a20-cubieboard2     PASS:    0 min 14.4 sec
tegra_defconfig
---------------
              tegra30-beaver     PASS:    0 min 17.0 sec
imx_v6_v7_defconfig
-------------------
  imx6dl-wandboard,wand-dual     PASS:    0 min 18.7 sec
  imx6dl-wandboard,wand-solo     PASS:    0 min 18.8 sec
             imx6q-wandboard     PASS:    0 min 17.3 sec
sunxi_defconfig
---------------
       sun7i-a20-cubieboard2     FAIL:    0 min 18.9 sec
        sun4i-a10-cubieboard     FAIL:    0 min 18.7 sec
bcm_defconfig
-------------
                 bcm28155-ap     PASS:    0 min 59.1 sec
mvebu_v7_defconfig
------------------
  armada-xp-openblocks-ax3-4     FAIL:    0 min 20.3 sec
          armada-370-mirabox     PASS:    0 min 20.4 sec
exynos_defconfig
----------------
          exynos5250-arndale     PASS:    0 min 29.6 sec
multi_v7_defconfig
------------------
                ste-snowball     PASS:    1 min 20.6 sec
              tegra30-beaver     PASS:    0 min 20.0 sec
            am335x-boneblack     PASS:    0 min 23.6 sec
             omap3-beagle-xm     FAIL:    0 min 31.4 sec
       sun7i-a20-cubieboard2     PASS:    0 min 14.5 sec
          armada-370-mirabox     PASS:    0 min 22.4 sec
                 omap4-panda     PASS:    0 min 51.9 sec
  armada-xp-openblocks-ax3-4     PASS:    0 min 25.0 sec
        sun4i-a10-cubieboard     PASS:    0 min 14.4 sec
                 bcm28155-ap     PASS:    1 min 10.4 sec
            omap3-overo-tobi     PASS:    0 min 21.9 sec
  imx6dl-wandboard,wand-solo     PASS:    0 min 18.3 sec
                 am335x-bone     PASS:    0 min 26.6 sec
      omap3-overo-storm-tobi     PASS:    0 min 24.4 sec
             imx6q-wandboard     PASS:    0 min 17.6 sec
              omap4-panda-es     PASS:    0 min 53.7 sec
  imx6dl-wandboard,wand-dual     PASS:    0 min 18.4 sec
u8500_defconfig
---------------
                ste-snowball     PASS:    0 min 30.0 sec
sama5_defconfig
---------------
                  sama5d35ek     PASS:    0 min 17.5 sec
davinci_all_defconfig
---------------------
             legacy,dm365evm     PASS:    0 min 16.9 sec
Console logs for failures
=========================
sunxi_defconfig
---------------
sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log:
    -------------------------------------------------------
arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2
GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919
sun7i# setenv ethaddr 22:71:81:DA:53:EA
setenv ethaddr 22:71:81:DA:53:EA
sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
sun7i# setenv initrd_high 0xffffffff
setenv initrd_high 0xffffffff
sun7i# if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
sun7i# if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
sun7i# setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
sun7i# dhcp
dhcp
ENET Speed is 100 Mbps - FULL duplex connection
BOOTP broadcast 1
DHCP client bound to address 192.168.1.153
sun7i# setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
sun7i# if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-8lLxsJ/zImage
tftp 0x40008000 192.168.1.2:tmp/cubie2-8lLxsJ/zImage
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'tmp/cubie2-8lLxsJ/zImage'.
Load address: 0x40008000
Loading: *#################################################################
     ########################################################
     2.7 MiB/s
done
Bytes transferred = 1772976 (1b0db0 hex)
sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x42000000
Loading: *############################################
     2.7 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-8lLxsJ/sun7i-a20-cubieboard2.dtb
tftp 0x41000000 192.168.1.2:tmp/cubie2-8lLxsJ/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'tmp/cubie2-8lLxsJ/sun7i-a20-cubieboard2.dtb'.
Load address: 0x41000000
Loading: *#
     1.9 MiB/s
done
Bytes transferred = 12228 (2fc4 hex)
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun7i#bootz 0x40008000 0x42000000 0x41000000
 bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x1b0db0 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   
   Created:      2014-02-07  19:37:29 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ff9000, end 40ffefc3 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 18.91 seconds.
# PYBOOT: Result: FAIL
sun4i-a10-cubieboard: FAIL: last 80 lines of boot log:
    ------------------------------------------------------
arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2
GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919
sun4i# setenv ethaddr 2e:40:70:f0:12:08
setenv ethaddr 2e:40:70:f0:12:08
sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
sun4i# setenv initrd_high 0xffffffff
setenv initrd_high 0xffffffff
sun4i# if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
sun4i# if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
sun4i# setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
sun4i# dhcp
dhcp
ENET Speed is 100 Mbps - FULL duplex connection
BOOTP broadcast 1
DHCP client bound to address 192.168.1.193
sun4i# setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
sun4i# if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-xSjVmp/zImage
tftp 0x40008000 192.168.1.2:tmp/cubie-xSjVmp/zImage
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.193
Filename 'tmp/cubie-xSjVmp/zImage'.
Load address: 0x40008000
Loading: *#################################################################
     ########################################################
     2.7 MiB/s
done
Bytes transferred = 1772976 (1b0db0 hex)
sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.193
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x42000000
Loading: *############################################
     2.7 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-xSjVmp/sun4i-a10-cubieboard.dtb
tftp 0x41000000 192.168.1.2:tmp/cubie-xSjVmp/sun4i-a10-cubieboard.dtb
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.193
Filename 'tmp/cubie-xSjVmp/sun4i-a10-cubieboard.dtb'.
Load address: 0x41000000
Loading: *#
     2.1 MiB/s
done
Bytes transferred = 10877 (2a7d hex)
sun4i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun4i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x1b0db0 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   
   Created:      2014-02-07  19:37:29 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ffa000, end 40fffa7c ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 18.74 seconds.
# PYBOOT: Result: FAIL
mvebu_v7_defconfig
------------------
armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log:
    ------------------------------------------------------------
mv_xor d0060900.xor: Marvell shared XOR driver
mv_xor d0060900.xor: Marvell XOR: ( xor cpy )
mv_xor d0060900.xor: Marvell XOR: ( xor cpy )
mv_xor d00f0900.xor: Marvell shared XOR driver
mv_xor d00f0900.xor: Marvell XOR: ( xor cpy )
mv_xor d00f0900.xor: Marvell XOR: ( xor cpy )
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A
console [ttyS0] enabled
d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A
sata_mv d00a0000.sata: version 1.28
sata_mv d00a0000.sata: error getting phy -38
Unable to handle kernel NULL pointer dereference at virtual address 00000054
pgd = c0004000
[00000054] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc3-00505-g74b2668 #1
task: ee82ab80 ti: ee83c000 task.ti: ee83c000
PC is at __clk_put+0x1c/0x8c
LR is at clk_prepare_lock+0x10/0xfc
pc : [<c02c92b4>]    lr : [<c02c6960>]    psr: 60000113
sp : ee83de08  ip : 00000000  fp : ee807900
r10: ee397c90  r9 : ee90b000  r8 : ffffffda
r7 : ee90b010  r6 : 00000000  r5 : eeb080d0  r4 : 00000000
r3 : ee82ab80  r2 : ee82ab80  r1 : ee83ddf8  r0 : 00000054
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 10c53c7d  Table: 0000406a  DAC: 00000015
Process swapper/0 (pid: 1, stack limit = 0xee83c240)
Stack: (0xee83de08 to 0xee83e000)
de00:                   00000001 c0206700 ee910c60 c00ffbcc c0516d30 0000001f
de20: ee910c60 00000002 c03ea324 00000000 74726f70 ee910030 00000001 ee39ac18
de40: 0000008c ee90b010 c054f518 00000000 c054f518 c0516d30 0000008c ee83c030
de60: 00000000 c01cb250 c01cb238 c0588308 ee90b010 c01c99d8 00000007 ee90b010
de80: c054f518 ee90b044 00000000 c01c9c58 00000000 c054f518 c01c9bc0 c01c80d0
dea0: ee85a7dc ee85e134 c054f518 ee397d00 c054e478 c01c9280 c0499614 c05652c0
dec0: c054f518 c054f518 00000006 c05652c0 c05652c0 c01ca29c 00000000 c052c980
dee0: 00000006 c0516d60 c052c980 c000893c 0000008c 00000000 c04810f0 00000000
df00: 00000000 c04dea90 00000064 ee83df20 c0035d80 c0035d8c 00000113 ffffffff
df20: ef7fce1b c03e3b20 0000008c c0035f74 c04dea80 00000006 ef7fce26 00000006
df40: c053deb0 c052c980 00000006 c05652c0 c05652c0 c050250c 0000008c c0525d14
df60: c0525d08 c0502c40 00000006 00000006 c050250c d456fc5d 0fbbed6f 57affddf
df80: fbff7bce 00000000 c03c6ffc 00000000 00000000 00000000 00000000 00000000
dfa0: 00000000 c03c7004 00000000 c000e338 00000000 00000000 00000000 00000000
dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 9757fff7 dd7dfd3f
[<c02c92b4>] (__clk_put) from [<c0206700>] (mv_platform_probe+0x2ac/0x414)
[<c0206700>] (mv_platform_probe) from [<c01cb250>] (platform_drv_probe+0x18/0x48)
[<c01cb250>] (platform_drv_probe) from [<c01c99d8>] (really_probe+0x80/0x214)
[<c01c99d8>] (really_probe) from [<c01c9c58>] (__driver_attach+0x98/0x9c)
[<c01c9c58>] (__driver_attach) from [<c01c80d0>] (bus_for_each_dev+0x60/0x94)
[<c01c80d0>] (bus_for_each_dev) from [<c01c9280>] (bus_add_driver+0x148/0x1f0)
[<c01c9280>] (bus_add_driver) from [<c01ca29c>] (driver_register+0x78/0xf8)
[<c01ca29c>] (driver_register) from [<c0516d60>] (mv_init+0x30/0x50)
[<c0516d60>] (mv_init) from [<c000893c>] (do_one_initcall+0xf8/0x144)
[<c000893c>] (do_one_initcall) from [<c0502c40>] (kernel_init_freeable+0x138/0x1d8)
[<c0502c40>] (kernel_init_freeable) from [<c03c7004>] (kernel_init+0x8/0xf0)
[<c03c7004>] (kernel_init) from [<c000e338>] (ret_from_fork+0x14/0x3c)
Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) 
---[ end trace 263e553c74ddf1e5 ]---
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
CPU1: stopping
CPU: 1 PID: 0 Comm: swapper/1 Tainted: G      D      3.14.0-rc3-00505-g74b2668 #1
[<c0014940>] (unwind_backtrace) from [<c0011194>] (show_stack+0x10/0x14)
[<c0011194>] (show_stack) from [<c03cb7fc>] (dump_stack+0x80/0x90)
[<c03cb7fc>] (dump_stack) from [<c0013d04>] (handle_IPI+0x148/0x170)
[<c0013d04>] (handle_IPI) from [<c00085cc>] (armada_370_xp_handle_irq+0xac/0xb0)
[<c00085cc>] (armada_370_xp_handle_irq) from [<c0011cc0>] (__irq_svc+0x40/0x50)
Exception stack(0xee877fa0 to 0xee877fe8)
7fa0: eefe55b8 00000000 00000944 00000000 ee876000 c05384ac c03d2d00 ee876000
7fc0: c0565176 00000001 c0565176 ee876000 00000000 ee877fe8 c000eeac c00558b8
7fe0: 60000113 ffffffff
[<c0011cc0>] (__irq_svc) from [<c00558b8>] (cpu_startup_entry+0xf4/0x134)
[<c00558b8>] (cpu_startup_entry) from [<000086c4>] (0x86c4)
~$off
# PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054
# PYBOOT: Time: 20.29 seconds.
# PYBOOT: Result: FAIL
multi_v7_defconfig
------------------
omap3-beagle-xm: FAIL: last 80 lines of boot log:
    -------------------------------------------------
Connected to 3730xm console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(3730xm console)> hardreset
(user:khilman) Reboot 3730xm
Reboot: 3730xm ; phidget 0 2 :  off, sleep, on
 0 
OMAP3 beagleboard.org # ~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.39 seconds.
# PYBOOT: Result: FAIL