Linaro-mm-sig January 2015

linaro-mm-sig@lists.linaro.org

18 participants
14 discussions

by Benjamin Gaignard

Hello David, This series of patches fix various issues in STI drm driver. Now HDMI i2c adapter could be selected in device tree and plug detection doesn't use gpio anymore. I also had fix some signal timing problems after testing the driver on more hardware. The remaining patches attemps to simplify the code and prepare the next evolutions like DVO and auxiliary CRTC support The changes could be fetch here: http://git.linaro.org/people/benjamin.gaignard/kernel.git on drm-sti-fixes-2014-12-04 branch I have tested this branch on top of commit: "Merge branch 'drm-fixes-3.18' of git://people.freedesktop.org/~agd5f/linux into drm-fixes" 00d6a9b6be5885ad38234cd171f6fb18a87faa7c on drm-fixes branch. Benjamin Gaignard (9): drm: sti: allow to change hdmi ddc i2c adapter drm: sti: remove gpio for HDMI hot plug detection drm: sti: clear all mixer control drm: sti: simplify gdp code drm: sti: remove event lock while disabling vblank drm: sti: fix hdmi avi infoframe drm: sti: use drm_crtc_vblank_{on/off} instead of drm_vblank_{on/off} drm: sti: prepare sti_tvout to support auxiliary crtc drm: sti: fix delay in VTG programming .../devicetree/bindings/gpu/st,stih4xx.txt | 3 +- drivers/gpu/drm/sti/sti_drm_crtc.c | 10 +-- drivers/gpu/drm/sti/sti_gdp.c | 39 ++++----- drivers/gpu/drm/sti/sti_hdmi.c | 84 +++++++++++--------- drivers/gpu/drm/sti/sti_hdmi.h | 6 +- drivers/gpu/drm/sti/sti_mixer.c | 9 +++ drivers/gpu/drm/sti/sti_mixer.h | 1 + drivers/gpu/drm/sti/sti_tvout.c | 92 ++++++++++++---------- drivers/gpu/drm/sti/sti_vtg.c | 31 +++++++- 9 files changed, 166 insertions(+), 109 deletions(-) -- 1.9.1

9 years, 3 months

[PATCH v3 00/19] Exynos SYSMMU (IOMMU) integration with DT and DMA-mapping subsystem

by Marek Szyprowski

Hello Everyone, This is another attempt to finally make Exynos SYSMMU driver fully integrated with DMA-mapping subsystem. The main change from previous version is a rebase onto latest "automatic DMA configuration for IOMMU masters" patches from Will Deacon. This patchset demonstrates that Will's proposal works fine and significantly simplifies the driver code. Best regards Marek Szyprowski Samsung R&D Institute Poland Changelog: v3: - rebased onto "[RFC PATCH v4 0/8] Introduce automatic DMA configuration for IOMMU masters" - added some minor fixes for iommu and dma-mapping frameworks v2: http://thread.gmane.org/gmane.linux.kernel.iommu/6472/ - rebased onto "[RFC PATCH v3 0/7] Introduce automatic DMA configuration for IOMMU masters" patches: http://www.spinics.net/lists/arm-kernel/msg362076.html - changed initialization from bus notifiers to DT related callbacks - removed support for separate IO address spaces - this will be discussed separately after the basic support gets merged - removed support for power domain notifier-based runtime power management - this also will be discussed separately later v1: https://lkml.org/lkml/2014/8/5/183 - initial version, feature complete, completely rewrote integration approach Patch summary: Marek Szyprowski (19): iommu: fix const qualifier in of_iommu_set_ops iommu: fix initialization without 'add_device' callback arm: dma-mapping: add missing check for iommu drm: exynos: detach from default dma-mapping domain on init arm: exynos: pm_domains: add support for devices registered before arch_initcall ARM: dts: exynos4: add sysmmu nodes iommu: exynos: don't read version register on every tlb operation iommu: exynos: remove unused functions iommu: exynos: remove useless spinlock iommu: exynos: refactor function parameters to simplify code iommu: exynos: remove unused functions, part 2 iommu: exynos: remove useless device_add/remove callbacks iommu: exynos: add support for binding more than one sysmmu to master device iommu: exynos: add support for runtime_pm iommu: exynos: rename variables to reflect their purpose iommu: exynos: document internal structures iommu: exynos: remove excessive includes and sort others alphabetically iommu: exynos: init from dt-specific callback instead of initcall iommu: exynos: add callback for initializing devices from device tree arch/arm/boot/dts/exynos4.dtsi | 117 +++++++ arch/arm/boot/dts/exynos4210.dtsi | 23 ++ arch/arm/boot/dts/exynos4x12.dtsi | 82 +++++ arch/arm/mach-exynos/pm_domains.c | 9 +- arch/arm/mm/dma-mapping.c | 2 +- drivers/gpu/drm/exynos/exynos_drm_iommu.c | 3 + drivers/iommu/exynos-iommu.c | 490 ++++++++++++++---------------- drivers/iommu/iommu.c | 2 +- include/linux/of_iommu.h | 4 +- 9 files changed, 459 insertions(+), 273 deletions(-) -- 1.9.2

9 years, 3 months

[GIT PULL] drm: sti: add DVO output connector

by Benjamin Gaignard

Hello Dave, This patch enable the last big hardware feature of my driver: the connector for panel. Like for HMDI and HDA, Digital Video Out (DVO) create brige, encoder and connector drm objects. The following changes since commit 4e0cd68115620bc3236ff4e58e4c073948629b41: drm: sti: fix module compilation issue (2014-12-15 17:07:57 +1000) are available in the git repository at: http://git.linaro.org/people/benjamin.gaignard/kernel.git drm-sti-next-add-dvo for you to fetch changes up to f32c4c506f9b197f24d4be4ee7283bd549e3a30f: drm: sti: add DVO output connector (2014-12-30 15:08:16 +0100) ---------------------------------------------------------------- Benjamin Gaignard (1): drm: sti: add DVO output connector .../devicetree/bindings/gpu/st,stih4xx.txt | 29 ++ drivers/gpu/drm/sti/Makefile | 4 + drivers/gpu/drm/sti/sti_awg_utils.c | 184 +++++++ drivers/gpu/drm/sti/sti_awg_utils.h | 34 ++ drivers/gpu/drm/sti/sti_dvo.c | 551 +++++++++++++++++++++ drivers/gpu/drm/sti/sti_tvout.c | 118 +++++ 6 files changed, 920 insertions(+) create mode 100644 drivers/gpu/drm/sti/sti_awg_utils.c create mode 100644 drivers/gpu/drm/sti/sti_awg_utils.h create mode 100644 drivers/gpu/drm/sti/sti_dvo.c

9 years, 3 months

[RFC 0/4] dma-buf Constraints-Enabled Allocation helpers

by Sumit Semwal

Hi, Why: ==== While sharing buffers using dma-buf, currently there's no mechanism to let devices share their memory access constraints with each other to allow for delayed allocation of backing storage. This RFC attempts to introduce the idea of memory constraints of a device, and how these constraints can be shared and used to help allocate buffers that can satisfy requirements of all devices attached to a particular dma-buf. How: ==== A constraints_mask is added to dma_parms of the device, and at the time of each device attachment to a dma-buf, the dma-buf uses this constraints_mask to calculate the access_mask for the dma-buf. Allocators can be defined for each of these constraints_masks, and then helper functions can be used to allocate the backing storage from the matching allocator satisfying the constraints of all devices interested. A new miscdevice, /dev/cenalloc [1] is created, which acts as the dma-buf exporter to make this transparent to the devices. More details in the patch description of "cenalloc: Constraint-Enabled Allocation helpers for dma-buf". At present, the constraint_mask is only a bitmask, but it should be possible to change it to a struct and adapt the constraint_mask calculation accordingly, based on discussion. Important requirement: ====================== Of course, delayed allocation can only work if all participating devices will wait for other devices to have 'attached' before mapping the buffer for the first time. As of now, users of dma-buf(drm prime, v4l2 etc) call the attach() and then map_attachment() almost immediately after it. This would need to be changed if they were to benefit from constraints. What 'cenalloc' is not: ======================= - not 'general' allocator helpers - useful only for constraints-enabled devices that share buffers with others using dma-buf. - not a replacement for existing allocation mechanisms inside various subsystems; merely a possible alternative. - no page-migration - it would be very complementary to the delayed allocation suggested here. TODOs: ====== - demonstration test cases - vma helpers for allocators - more sample allocators - userspace ioctl (It should be a simple one, and we have one ready, but wanted to agree on the kernel side of things first) May the brickbats begin, please! :) Best regards, ~Sumit. [1]: 'C'onstraints 'EN'abled 'ALLOC'ation helpers = cenalloc: it might not be a very appealing name, so suggestions are very welcome! Benjamin Gaignard (1): cenalloc: a sample allocator for contiguous page allocation Sumit Semwal (3): dma-buf: Add constraints sharing information cenalloc: Constraint-Enabled Allocation helpers for dma-buf cenalloc: Build files for constraint-enabled allocation helpers MAINTAINERS | 1 + drivers/Kconfig | 2 + drivers/Makefile | 1 + drivers/cenalloc/Kconfig | 8 + drivers/cenalloc/Makefile | 3 + drivers/cenalloc/cenalloc.c | 597 ++++++++++++++++++++++++++++++ drivers/cenalloc/cenalloc.h | 99 +++++ drivers/cenalloc/cenalloc_priv.h | 188 ++++++++++ drivers/cenalloc/cenalloc_system_contig.c | 225 +++++++++++ drivers/dma-buf/dma-buf.c | 50 ++- include/linux/device.h | 7 +- include/linux/dma-buf.h | 14 + 12 files changed, 1189 insertions(+), 6 deletions(-) create mode 100644 drivers/cenalloc/Kconfig create mode 100644 drivers/cenalloc/Makefile create mode 100644 drivers/cenalloc/cenalloc.c create mode 100644 drivers/cenalloc/cenalloc.h create mode 100644 drivers/cenalloc/cenalloc_priv.h create mode 100644 drivers/cenalloc/cenalloc_system_contig.c -- 1.9.1

9 years, 3 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Linaro-mm-sig January 2015