Linaro-mm-sig

linaro-mm-sig@lists.linaro.org

2 participants
2906 discussions

Re: [Linaro-mm-sig] [PATCH] drm/udl: avoid swiotlb for imported vmap buffers.

by Daniel Vetter

On Wed, May 1, 2013 at 6:30 AM, Dave Airlie <airlied(a)gmail.com> wrote: > Since we ask the dmabuf owner to map the dma-buf into our device > address space, but for udl at present that is the CPU address space, > since we don't DMA directly from the mapped buffer. > > However if we don't set a dma mask on the usb device, the mapping > ends up using swiotlb on machines that have it enabled, which > is less than desireable. > > Signed-off-by: Dave Airlie <airlied(a)redhat.com> Fyi for everyone else who was not on irc when Dave&I discussed this: This really shouldn't be required and I think the real issue is that udl creates a dma_buf attachement (which is needed for device dma only), but only really wants to do cpu access through vmap/kmap. So not attached the device should be good enough. Cc'ing a few more lists for better fyi ;-) -Daniel > --- > drivers/gpu/drm/udl/udl_main.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/gpu/drm/udl/udl_main.c b/drivers/gpu/drm/udl/udl_main.c > index 0ce2d71..6770e1b 100644 > --- a/drivers/gpu/drm/udl/udl_main.c > +++ b/drivers/gpu/drm/udl/udl_main.c > @@ -293,6 +293,7 @@ int udl_driver_load(struct drm_device *dev, unsigned long flags) > udl->ddev = dev; > dev->dev_private = udl; > > + dma_set_mask(dev->dev, DMA_BIT_MASK(64)); > if (!udl_parse_vendor_descriptor(dev, dev->usbdev)) { > DRM_ERROR("firmware not recognized. Assume incompatible device\n"); > goto err; > -- > 1.8.2 > > _______________________________________________ > dri-devel mailing list > dri-devel(a)lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/dri-devel -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch

12 years, 1 month

RFC: Unified DMA allocation algorithms

by Laura Abbott

Hi all, I've been looking at a better way to do custom dma allocation algorithms in a similar style to Ion heaps. Most drivers/clients have come up with a series of semi-standard ways to get memory (CMA, memblock_reserve, discontiguous pages etc.) . As these allocation schemes get more and more complex, there needs to be a since place where all clients (Ion based driver vs. DRM driver vs. ???) can independently take advantage of any optimizations and call a single API for the backing allocations. The dma_map_ops take care of almost everything needed for abstraction but the question is where should new allocation algorithms be located? Most of the work has been added to either arm/mm/dma-mapping.c or dma-contiguous.c . My current thought: 1) split out the dma_map_ops currently in dma-mapping.c into separate files (dma-mapping-common.c, dma-mapping-iommu.c) 2) Extend dma-contiguous.c to support memblock_reserve memory 3) Place additional algorithms in either arch/arm/mm or drivers/base/dma-alloc/ as appropriate to the code. This is the part where I'm most unsure about the direction. I don't have anything written yet but I plan to draft some patches assuming the proposed approach sounds reasonable and no one else has started on something similar already. Thoughts? Opinions? Thanks, Laura -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

12 years, 2 months

[GIT PULL]: dma-buf updates for 3.10

by Sumit Semwal

Hi Linus, The 3.10 pull request for dma-buf framework updates: small one, could you please pull? Thanks and best regards, ~Sumit. The following changes since commit 5f56886521d6ddd3648777fae44d82382dd8c87f: Merge branch 'akpm' (incoming from Andrew) (2013-04-30 17:37:43 -0700) are available in the git repository at: git://git.linaro.org/people/sumitsemwal/linux-dma-buf.git tags/tag-for-linus-3.10 for you to fetch changes up to b89e35636bc75b72d15a1af6d49798802aff77d5: dma-buf: Add debugfs support (2013-05-01 16:36:22 +0530) ---------------------------------------------------------------- 3.10 dma-buf updates Added debugfs support to dma-buf. ---------------------------------------------------------------- Sumit Semwal (2): dma-buf: replace dma_buf_export() with dma_buf_export_named() dma-buf: Add debugfs support Documentation/dma-buf-sharing.txt | 13 ++- drivers/base/dma-buf.c | 169 +++++++++++++++++++++++++++++++++++++- include/linux/dma-buf.h | 16 +++- 3 files changed, 189 insertions(+), 9 deletions(-)

12 years, 2 months

[RFC/PATCH v2 0/2] Device Tree support for CMA (Contiguous Memory Allocator)

by Marek Szyprowski

Hello, This is an update for my proposal for device tree integration for Contiguous Memory Allocator. The code is quite straightforward, but expect again that the device tree bindings will trigger some discussion. Just a few words for those who see this code for the first time: The proposed bindings allows to define contiguous memory regions of specified base address and size. Then, the defined regions can be assigned to the given device(s) by adding a property with a phanle to the defined contiguous memory region. From the device tree perspective that's all. Once the bindings are added, all the memory allocations from dma-mapping subsystem will be served from the defined contiguous memory regions. Contiguous Memory Allocator is a framework, which lets to provide a large contiguous memory buffers for (usually a multimedia) devices. The contiguous memory is reserved during early boot and then shared with kernel, which is allowed to allocate it for movable pages. Then, when device driver requests a contigouous buffer, the framework migrates movable pages out of contiguous region and gives it to the driver. When device driver frees the buffer, it is added to kernel memory pool again. For more information, please refer to commit c64be2bb1c6eb43c838b2c6d57 ("drivers: add Contiguous Memory Allocator") and d484864dd96e1830e76895 (CMA merge commit). Why we need device tree bindings for CMA at all? Older ARM kernels used so called board-based initialization. Those board files contained a definition of all hardware blocks available on the target system and particular kernel and driver software configuration selected by the board maintainer. In the new approach the board files will be removed completely and Device Tree approach is used to describe all hardware blocks available on the target system. By definition, the bindings should be software independent, so at least in theory it should be possible to use those bindings with other operating systems than Linux kernel. However we also need to pass somehow the information about kernel and device driver software-only configuration data, which were earlier encoded in the board file. For such data I propose to use /chosen node, where kernel command line has been already stored. Future bootloaders will allow to modify or replace particular nodes and one will be able to use custom /chosen node to configure his system. The proposed patches introduce /chosen/contiguous-memory node and related bindings, to avoid complicated encoding of CMA related configuration to kernel command line. Best regards Marek Szyprowski Samsung Poland R&D Center Changelog: v2: - moved contiguous-memory bindings from /memory to /chosen/contiguous-memory/ node to avoid spreading Linux specific parameters over the whole device tree definitions - added support for autoconfigured regions (use zero base) - fixes minor bugs v1: http://thread.gmane.org/gmane.linux.drivers.devicetree/30111/ - initial proposal Patch summary: Marek Szyprowski (2): drivers: dma-contiguous: clean source code and prepare for device tree drivers: dma-contiguous: add initialization from device tree Documentation/devicetree/bindings/memory.txt | 101 ++++++++++ arch/arm/boot/dts/skeleton.dtsi | 7 +- drivers/base/dma-contiguous.c | 278 +++++++++++++++++++------- include/asm-generic/dma-contiguous.h | 4 +- include/linux/dma-contiguous.h | 32 ++- 5 files changed, 338 insertions(+), 84 deletions(-) create mode 100644 Documentation/devicetree/bindings/memory.txt -- 1.7.9.5

12 years, 2 months

[PATCH v2 1/3] arch: make __mutex_fastpath_lock_retval return whether fastpath succeeded or not.

by Maarten Lankhorst

This will allow me to call functions that have multiple arguments if fastpath fails. This is required to support ticket mutexes, because they need to be able to pass an extra argument to the fail function. Originally I duplicated the functions, by adding __mutex_fastpath_lock_retval_arg. This ended up being just a duplication of the existing function, so a way to test if fastpath was called ended up being better. This also cleaned up the reservation mutex patch some by being able to call an atomic_set instead of atomic_xchg, and making it easier to detect if the wrong unlock function was previously used. Signed-off-by: Maarten Lankhorst <maarten.lankhorst(a)canonical.com> --- arch/ia64/include/asm/mutex.h | 10 ++++------ arch/powerpc/include/asm/mutex.h | 10 ++++------ arch/sh/include/asm/mutex-llsc.h | 4 ++-- arch/x86/include/asm/mutex_32.h | 11 ++++------- arch/x86/include/asm/mutex_64.h | 11 ++++------- include/asm-generic/mutex-dec.h | 10 ++++------ include/asm-generic/mutex-null.h | 2 +- include/asm-generic/mutex-xchg.h | 10 ++++------ kernel/mutex.c | 32 ++++++++++++++------------------ 9 files changed, 41 insertions(+), 59 deletions(-) diff --git a/arch/ia64/include/asm/mutex.h b/arch/ia64/include/asm/mutex.h index bed73a6..f41e66d 100644 --- a/arch/ia64/include/asm/mutex.h +++ b/arch/ia64/include/asm/mutex.h @@ -29,17 +29,15 @@ __mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *)) * __mutex_fastpath_lock_retval - try to take the lock by moving the count * from 1 to a 0 value * @count: pointer of type atomic_t - * @fail_fn: function to call if the original value was not 1 * - * Change the count from 1 to a value lower than 1, and call <fail_fn> if - * it wasn't 1 originally. This function returns 0 if the fastpath succeeds, - * or anything the slow path function returns. + * Change the count from 1 to a value lower than 1. This function returns 0 + * if the fastpath succeeds, or -1 otherwise. */ static inline int -__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *)) +__mutex_fastpath_lock_retval(atomic_t *count) { if (unlikely(ia64_fetchadd4_acq(count, -1) != 1)) - return fail_fn(count); + return -1; return 0; } diff --git a/arch/powerpc/include/asm/mutex.h b/arch/powerpc/include/asm/mutex.h index 5399f7e..127ab23 100644 --- a/arch/powerpc/include/asm/mutex.h +++ b/arch/powerpc/include/asm/mutex.h @@ -82,17 +82,15 @@ __mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *)) * __mutex_fastpath_lock_retval - try to take the lock by moving the count * from 1 to a 0 value * @count: pointer of type atomic_t - * @fail_fn: function to call if the original value was not 1 * - * Change the count from 1 to a value lower than 1, and call <fail_fn> if - * it wasn't 1 originally. This function returns 0 if the fastpath succeeds, - * or anything the slow path function returns. + * Change the count from 1 to a value lower than 1. This function returns 0 + * if the fastpath succeeds, or -1 otherwise. */ static inline int -__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *)) +__mutex_fastpath_lock_retval(atomic_t *count) { if (unlikely(__mutex_dec_return_lock(count) < 0)) - return fail_fn(count); + return -1; return 0; } diff --git a/arch/sh/include/asm/mutex-llsc.h b/arch/sh/include/asm/mutex-llsc.h index 090358a..dad29b6 100644 --- a/arch/sh/include/asm/mutex-llsc.h +++ b/arch/sh/include/asm/mutex-llsc.h @@ -37,7 +37,7 @@ __mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *)) } static inline int -__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *)) +__mutex_fastpath_lock_retval(atomic_t *count) { int __done, __res; @@ -51,7 +51,7 @@ __mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *)) : "t"); if (unlikely(!__done || __res != 0)) - __res = fail_fn(count); + __res = -1; return __res; } diff --git a/arch/x86/include/asm/mutex_32.h b/arch/x86/include/asm/mutex_32.h index 03f90c8..b7f6b34 100644 --- a/arch/x86/include/asm/mutex_32.h +++ b/arch/x86/include/asm/mutex_32.h @@ -42,17 +42,14 @@ do { \ * __mutex_fastpath_lock_retval - try to take the lock by moving the count * from 1 to a 0 value * @count: pointer of type atomic_t - * @fail_fn: function to call if the original value was not 1 * - * Change the count from 1 to a value lower than 1, and call <fail_fn> if it - * wasn't 1 originally. This function returns 0 if the fastpath succeeds, - * or anything the slow path function returns + * Change the count from 1 to a value lower than 1. This function returns 0 + * if the fastpath succeeds, or 1 otherwise. */ -static inline int __mutex_fastpath_lock_retval(atomic_t *count, - int (*fail_fn)(atomic_t *)) +static inline int __mutex_fastpath_lock_retval(atomic_t *count) { if (unlikely(atomic_dec_return(count) < 0)) - return fail_fn(count); + return -1; else return 0; } diff --git a/arch/x86/include/asm/mutex_64.h b/arch/x86/include/asm/mutex_64.h index 68a87b0..2c543ff 100644 --- a/arch/x86/include/asm/mutex_64.h +++ b/arch/x86/include/asm/mutex_64.h @@ -37,17 +37,14 @@ do { \ * __mutex_fastpath_lock_retval - try to take the lock by moving the count * from 1 to a 0 value * @count: pointer of type atomic_t - * @fail_fn: function to call if the original value was not 1 * - * Change the count from 1 to a value lower than 1, and call <fail_fn> if - * it wasn't 1 originally. This function returns 0 if the fastpath succeeds, - * or anything the slow path function returns + * Change the count from 1 to a value lower than 1. This function returns 0 + * if the fastpath succeeds, or -1 otherwise. */ -static inline int __mutex_fastpath_lock_retval(atomic_t *count, - int (*fail_fn)(atomic_t *)) +static inline int __mutex_fastpath_lock_retval(atomic_t *count) { if (unlikely(atomic_dec_return(count) < 0)) - return fail_fn(count); + return -1; else return 0; } diff --git a/include/asm-generic/mutex-dec.h b/include/asm-generic/mutex-dec.h index f104af7..d4f9fb4 100644 --- a/include/asm-generic/mutex-dec.h +++ b/include/asm-generic/mutex-dec.h @@ -28,17 +28,15 @@ __mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *)) * __mutex_fastpath_lock_retval - try to take the lock by moving the count * from 1 to a 0 value * @count: pointer of type atomic_t - * @fail_fn: function to call if the original value was not 1 * - * Change the count from 1 to a value lower than 1, and call <fail_fn> if - * it wasn't 1 originally. This function returns 0 if the fastpath succeeds, - * or anything the slow path function returns. + * Change the count from 1 to a value lower than 1. This function returns 0 + * if the fastpath succeeds, or -1 otherwise. */ static inline int -__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *)) +__mutex_fastpath_lock_retval(atomic_t *count) { if (unlikely(atomic_dec_return(count) < 0)) - return fail_fn(count); + return -1; return 0; } diff --git a/include/asm-generic/mutex-null.h b/include/asm-generic/mutex-null.h index e1bbbc7..efd6206 100644 --- a/include/asm-generic/mutex-null.h +++ b/include/asm-generic/mutex-null.h @@ -11,7 +11,7 @@ #define _ASM_GENERIC_MUTEX_NULL_H #define __mutex_fastpath_lock(count, fail_fn) fail_fn(count) -#define __mutex_fastpath_lock_retval(count, fail_fn) fail_fn(count) +#define __mutex_fastpath_lock_retval(count, fail_fn) (-1) #define __mutex_fastpath_unlock(count, fail_fn) fail_fn(count) #define __mutex_fastpath_trylock(count, fail_fn) fail_fn(count) #define __mutex_slowpath_needs_to_unlock() 1 diff --git a/include/asm-generic/mutex-xchg.h b/include/asm-generic/mutex-xchg.h index c04e0db..f169ec0 100644 --- a/include/asm-generic/mutex-xchg.h +++ b/include/asm-generic/mutex-xchg.h @@ -39,18 +39,16 @@ __mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *)) * __mutex_fastpath_lock_retval - try to take the lock by moving the count * from 1 to a 0 value * @count: pointer of type atomic_t - * @fail_fn: function to call if the original value was not 1 * - * Change the count from 1 to a value lower than 1, and call <fail_fn> if it - * wasn't 1 originally. This function returns 0 if the fastpath succeeds, - * or anything the slow path function returns + * Change the count from 1 to a value lower than 1. This function returns 0 + * if the fastpath succeeds, or -1 otherwise. */ static inline int -__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *)) +__mutex_fastpath_lock_retval(atomic_t *count) { if (unlikely(atomic_xchg(count, 0) != 1)) if (likely(atomic_xchg(count, -1) != 1)) - return fail_fn(count); + return -1; return 0; } diff --git a/kernel/mutex.c b/kernel/mutex.c index 52f2301..84a5f07 100644 --- a/kernel/mutex.c +++ b/kernel/mutex.c @@ -351,10 +351,10 @@ __mutex_unlock_slowpath(atomic_t *lock_count) * mutex_lock_interruptible() and mutex_trylock(). */ static noinline int __sched -__mutex_lock_killable_slowpath(atomic_t *lock_count); +__mutex_lock_killable_slowpath(struct mutex *lock); static noinline int __sched -__mutex_lock_interruptible_slowpath(atomic_t *lock_count); +__mutex_lock_interruptible_slowpath(struct mutex *lock); /** * mutex_lock_interruptible - acquire the mutex, interruptible @@ -372,12 +372,12 @@ int __sched mutex_lock_interruptible(struct mutex *lock) int ret; might_sleep(); - ret = __mutex_fastpath_lock_retval - (&lock->count, __mutex_lock_interruptible_slowpath); - if (!ret) + ret = __mutex_fastpath_lock_retval(&lock->count); + if (likely(!ret)) { mutex_set_owner(lock); - - return ret; + return 0; + } else + return __mutex_lock_interruptible_slowpath(lock); } EXPORT_SYMBOL(mutex_lock_interruptible); @@ -387,12 +387,12 @@ int __sched mutex_lock_killable(struct mutex *lock) int ret; might_sleep(); - ret = __mutex_fastpath_lock_retval - (&lock->count, __mutex_lock_killable_slowpath); - if (!ret) + ret = __mutex_fastpath_lock_retval(&lock->count); + if (likely(!ret)) { mutex_set_owner(lock); - - return ret; + return 0; + } else + return __mutex_lock_killable_slowpath(lock); } EXPORT_SYMBOL(mutex_lock_killable); @@ -405,18 +405,14 @@ __mutex_lock_slowpath(atomic_t *lock_count) } static noinline int __sched -__mutex_lock_killable_slowpath(atomic_t *lock_count) +__mutex_lock_killable_slowpath(struct mutex *lock) { - struct mutex *lock = container_of(lock_count, struct mutex, count); - return __mutex_lock_common(lock, TASK_KILLABLE, 0, NULL, _RET_IP_); } static noinline int __sched -__mutex_lock_interruptible_slowpath(atomic_t *lock_count) +__mutex_lock_interruptible_slowpath(struct mutex *lock) { - struct mutex *lock = container_of(lock_count, struct mutex, count); - return __mutex_lock_common(lock, TASK_INTERRUPTIBLE, 0, NULL, _RET_IP_); } #endif

12 years, 2 months

[patch 1/2 -next] dma-buf: double unlock in debugfs code

by Dan Carpenter

We unlock here when we failed to take the lock. Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> --- This is in linux-next, and I think the debugfs code is only in Sumit's tree. diff --git a/drivers/base/dma-buf.c b/drivers/base/dma-buf.c index 466476f..174cd2c 100644 --- a/drivers/base/dma-buf.c +++ b/drivers/base/dma-buf.c @@ -593,7 +593,7 @@ static int dma_buf_describe(struct seq_file *s) if (ret) { seq_printf(s, "\tERROR locking buffer object: skipping\n"); - goto skip_buffer; + continue; } seq_printf(s, "\t"); @@ -618,7 +618,6 @@ static int dma_buf_describe(struct seq_file *s) count++; size += buf_obj->size; -skip_buffer: mutex_unlock(&buf_obj->lock); }

12 years, 2 months

Re: [Linaro-mm-sig] Status of exporting an fbdev framebuffer with dma_buf?

by Laurent Pinchart

Hi Tom, On Tuesday 09 April 2013 12:21:08 Tom Cooksey wrote: > Hi All, > > Last year Laurent posted an RFC patch[i] to add support for exporting an > fbdev framebuffer through dma_buf. Looking through the mailing list > archives, it doesn't appear to have progressed beyond an RFC? What would be > needed to get this merged? It would be useful for our Mali T6xx driver > (which supports importing dma_buf buffers) to allow the GPU to draw > directly into the framebuffer on platforms which lack a DRM/KMS driver. The patch was pretty simple, I don't think it would take lots of efforts to get it to mainline. On the other hand, fbdev is a dying API, so I'm not sure how much energy we want to spend on upgrading it. I suppose all that would be needed is a developer with enough interest in the topic to fix the patch according to the comments. > [i] Subject: "[RFC/PATCH] fb: Add dma-buf support", sent 20/06/2012. -- Regards, Laurent Pinchart

12 years, 2 months

Status of exporting an fbdev framebuffer with dma_buf?

by Tom Cooksey

Hi All, Last year Laurent posted an RFC patch[i] to add support for exporting an fbdev framebuffer through dma_buf. Looking through the mailing list archives, it doesn't appear to have progressed beyond an RFC? What would be needed to get this merged? It would be useful for our Mali T6xx driver (which supports importing dma_buf buffers) to allow the GPU to draw directly into the framebuffer on platforms which lack a DRM/KMS driver. [i] Subject: "[RFC/PATCH] fb: Add dma-buf support", sent 20/06/2012. Cheers, Tom

12 years, 2 months

[PATCH v3 0/2] dma-buf: Add support for debugfs

by Sumit Semwal

The patch series adds a much-missed support for debugfs to dma-buf framework. Based on the feedback received on v1 of this patch series, support is also added to allow exporters to provide name-strings that will prove useful while debugging. Some more magic can be added for more advanced debugging, but we'll leave that for the time being. Best regards, ~Sumit. --- changes since v2: (based on review comments from Laurent Pinchart) - reordered functions to avoid forward declaration - added __exitcall for dma_buf_deinit() changes since v1: - added patch to replace dma_buf_export() with dma_buf_export_named(), per suggestion from Daniel Vetter. - fixes on init and warnings as reported and corrected by Dave Airlie. - added locking while walking attachment list - reported by Daniel Vetter. Sumit Semwal (2): dma-buf: replace dma_buf_export() with dma_buf_export_named() dma-buf: Add debugfs support Documentation/dma-buf-sharing.txt | 13 ++- drivers/base/dma-buf.c | 170 ++++++++++++++++++++++++++++++++++++- include/linux/dma-buf.h | 16 +++- 3 files changed, 190 insertions(+), 9 deletions(-) -- 1.7.10.4

12 years, 2 months

[PATCH v2 0/2] dma-buf: Add support for debugfs

by Sumit Semwal

12 years, 3 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Linaro-mm-sig