On 1/11/24 3:20 AM, Paul Cercueil wrote:
Hi Andrew,
Le lundi 08 janvier 2024 à 15:12 -0600, Andrew Davis a écrit :
On 12/19/23 11:50 AM, Paul Cercueil wrote:
[V4 was: "iio: Add buffer write() support"][1]
Hi Jonathan,
This is a respin of the V3 of my patchset that introduced a new interface based on DMABUF objects [2].
The V4 was a split of the patchset, to attempt to upstream buffer write() support first. But since there is no current user upstream, it was not merged. This V5 is about doing the opposite, and contains the new DMABUF interface, without adding the buffer write() support. It can already be used with the upstream adi-axi-adc driver.
In user-space, Libiio uses it to transfer back and forth blocks of samples between the hardware and the applications, without having to copy the data.
On a ZCU102 with a FMComms3 daughter board, running Libiio from the pcercuei/dev-new-dmabuf-api branch [3], compiled with WITH_LOCAL_DMABUF_API=OFF (so that it uses fileio): sudo utils/iio_rwdev -b 4096 -B cf-ad9361-lpc Throughput: 116 MiB/s
Same hardware, with the DMABUF API (WITH_LOCAL_DMABUF_API=ON): sudo utils/iio_rwdev -b 4096 -B cf-ad9361-lpc Throughput: 475 MiB/s
This benchmark only measures the speed at which the data can be fetched to iio_rwdev's internal buffers, and does not actually try to read the data (e.g. to pipe it to stdout). It shows that fetching the data is more than 4x faster using the new interface.
When actually reading the data, the performance difference isn't that impressive (maybe because in case of DMABUF the data is not in cache):
WITH_LOCAL_DMABUF_API=OFF (so that it uses fileio): sudo utils/iio_rwdev -b 4096 cf-ad9361-lpc | dd of=/dev/zero status=progress 2446422528 bytes (2.4 GB, 2.3 GiB) copied, 22 s, 111 MB/s
WITH_LOCAL_DMABUF_API=ON: sudo utils/iio_rwdev -b 4096 cf-ad9361-lpc | dd of=/dev/zero status=progress 2334388736 bytes (2.3 GB, 2.2 GiB) copied, 21 s, 114 MB/s
One interesting thing to note is that fileio is (currently) actually faster than the DMABUF interface if you increase a lot the buffer size. My explanation is that the cache invalidation routine takes more and more time the bigger the DMABUF gets. This is because the DMABUF is backed by small-size pages, so a (e.g.) 64 MiB DMABUF is backed by up to 16 thousands pages, that have to be invalidated one by one. This can be addressed by using huge pages, but the udmabuf driver does not (yet) support creating DMABUFs backed by huge pages.
Have you tried DMABUFs created using the DMABUF System heap exporter? (drivers/dma-buf/heaps/system_heap.c) It should be able to handle larger allocation better here, and if you don't have any active mmaps or vmaps then it can skip CPU-side coherency maintenance (useful for device to device transfers).
I didn't know about it!
But udmabuf also allows you to skip CPU-side coherency maintenance, since DMABUFs have two ioctls to start/finish CPU access anyway.
The only way it lets you skip that is if your application just doesn't call those begin/end ioctls, which is wrong. That may work on a system where CPU caches can be snooped by all devices that could attach to a buffer(x86), but that might not work on others(ARM). So calling those begin/end ioctls is required[0]. If maintenance is not actually needed then the kernel will turn those calls into NOPs for you, but only the kernel can know when that is correct (based on the running system and the devices attached to that buffer), not userspace.
Allocating DMABUFs out of user pages has a bunch of other issues you might run into also. I'd argue udmabuf is now completely superseded by DMABUF system heaps. Try it out :)
I'm curious, what other issues?
For starters the {begin,end}_cpu_access() callbacks don't actually sync the pages for any of the devices attached to the DMABUF, it only makes a fake mapping for the misc device(CPU) then syncs with that. That probably works for the QEMU case it was designed for where the device is always a VM instance running on the same CPU, but for any real devices the sync never happens towards them.
I have some patches fixing the above I'll post this cycle, but it wont help with folks doing reads/wrties on the original shmem/memfd outside of the begin/end ioctls. So there is a fundamental issue with the buffer's backing memory's ownership/lifecycle that makes udmabuf broken by design.
The DMABUF System Heap owns the backing memory and manages that memory's lifecycle as all correct DMABUF exporters must.
The good thing about udmabuf is that the memory is backed by pages, so we can use MSG_ZEROCOPY on sockets to transfer the mmapped data over the network (having a DMABUF interface to the network stack would be better, but I'm not opening that can of worms).
Yes, having a DMABUF importer interface for the network stack would be the best long-term solution here, and one will probably end up being needed for zero-copy buffer passing directly between HW and network which seems to be a growing area of interest. And would help solve some cases where MSG_ZEROCOPY fails (such as devices without scatter-gather) by making sure the backing buffer meets the needs of all attached devices, etc.. But I do agree let's leave those worm-cans for someone else to open :)
I wonder what would happen if you tried a MSG_ZEROCOPY on a buffer that was an mmap'd address from a DMABUF.. probably nothing good but might be worth looking into.
Andrew
[0] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/driv...
Andrew
Cheers, -Paul
Anyway, the real benefits happen when the DMABUFs are either shared between IIO devices, or between the IIO subsystem and another filesystem. In that case, the DMABUFs are simply passed around drivers, without the data being copied at any moment.
We use that feature to transfer samples from our transceivers to USB, using a DMABUF interface to FunctionFS [4].
This drastically increases the throughput, to about 274 MiB/s over a USB3 link, vs. 127 MiB/s using IIO's fileio interface + write() to the FunctionFS endpoints, for a lower CPU usage (0.85 vs. 0.65 load avg.).
Based on linux-next/next-20231219.
Cheers, -Paul
[1] https://lore.kernel.org/all/20230807112113.47157-1-paul@crapouillou.net/ [2] https://lore.kernel.org/all/20230403154800.215924-1-paul@crapouillou.net/ [3] https://github.com/analogdevicesinc/libiio/tree/pcercuei/dev-new-dmabuf-api [4] https://lore.kernel.org/all/20230322092118.9213-1-paul@crapouillou.net/
Changelog:
- [3/8]: Replace V3's dmaengine_prep_slave_dma_array() with a new
dmaengine_prep_slave_dma_vec(), which uses a new 'dma_vec' struct. Note that at some point we will need to support cyclic transfers using dmaengine_prep_slave_dma_vec(). Maybe with a new "flags" parameter to the function?
- [4/8]: Implement .device_prep_slave_dma_vec() instead of V3's
.device_prep_slave_dma_array().
@Vinod: this patch will cause a small conflict with my other patchset adding scatter-gather support to the axi-dmac driver. This patch adds a call to axi_dmac_alloc_desc(num_sgs), but the prototype of this function changed in my other patchset - it would have to be passed the "chan" variable. I don't know how you prefer it to be resolved. Worst case scenario (and if @Jonathan is okay with that) this one patch can be re-sent later, but it would make this patchset less "atomic".
- [5/8]:
- Use dev_err() instead of pr_err() - Inline to_iio_dma_fence() - Add comment to explain why we unref twice when detaching dmabuf - Remove TODO comment. It is actually safe to free the file's private data even when transfers are still pending because it won't be accessed. - Fix documentation of new fields in struct iio_buffer_access_funcs - iio_dma_resv_lock() does not need to be exported, make it static
- [7/8]:
- Use the new dmaengine_prep_slave_dma_vec(). - Restrict to input buffers, since output buffers are not yet supported by IIO buffers.
- [8/8]:
Use description lists for the documentation of the three new IOCTLs instead of abusing subsections.
Alexandru Ardelean (1): iio: buffer-dma: split iio_dma_buffer_fileio_free() function
Paul Cercueil (7): iio: buffer-dma: Get rid of outgoing queue dmaengine: Add API function dmaengine_prep_slave_dma_vec() dmaengine: dma-axi-dmac: Implement device_prep_slave_dma_vec iio: core: Add new DMABUF interface infrastructure iio: buffer-dma: Enable support for DMABUFs iio: buffer-dmaengine: Support new DMABUF based userspace API Documentation: iio: Document high-speed DMABUF based API
Documentation/iio/dmabuf_api.rst | 54 +++ Documentation/iio/index.rst | 2 + drivers/dma/dma-axi-dmac.c | 40 ++ drivers/iio/buffer/industrialio-buffer-dma.c | 242 ++++++++--- .../buffer/industrialio-buffer-dmaengine.c | 52 ++- drivers/iio/industrialio-buffer.c | 402 ++++++++++++++++++ include/linux/dmaengine.h | 25 ++ include/linux/iio/buffer-dma.h | 33 +- include/linux/iio/buffer_impl.h | 26 ++ include/uapi/linux/iio/buffer.h | 22 + 10 files changed, 836 insertions(+), 62 deletions(-) create mode 100644 Documentation/iio/dmabuf_api.rst