The remaining change for neon-strided-load-extract is to allow fwprop.c
to propagate:
(set (reg X) (subreg (reg Y) N))
even if no further simplifications are possible. I posted the original
patch for comments here:
http://article.gmane.org/gmane.comp.gcc.patches/246180/
and fixed the problem that H.J. spotted. I wasn't entirely happy with
the benchmark results though, so it never became an RFA.
Richard
gcc/
* fwprop.c (propagate_rtx): Also set PR_CAN_APPEAR for subregs.
Index: gcc/fwprop.c
===================================================================
--- gcc/fwprop.c 2011-09-15 14:36:23.206143787 +0100
+++ gcc/fwprop.c 2011-09-15 14:36:40.995131564 +0100
@@ -664,7 +664,12 @@ propagate_rtx (rtx x, enum machine_mode
return NULL_RTX;
flags = 0;
- if (REG_P (new_rtx) || CONSTANT_P (new_rtx))
+ if (REG_P (new_rtx)
+ || CONSTANT_P (new_rtx)
+ || (GET_CODE (new_rtx) == SUBREG
+ && REG_P (SUBREG_REG (new_rtx))
+ && (GET_MODE_SIZE (mode)
+ <= GET_MODE_SIZE (GET_MODE (SUBREG_REG (new_rtx))))))
flags |= PR_CAN_APPEAR;
if (!for_each_rtx (&new_rtx, varying_mem_p, NULL))
flags |= PR_HANDLE_MEM;
== QEMU ==
* Wrote the context routines for Eglibc, including those that QEMU uses
These pass all the context tests I could find, including QEMUs coroutine
tests, and with them QEMU seems to boot OK. I've got a full eglibc test
run going at the moment, but I don't think anything else uses
them. I posted
them with comments and a question to libc-ports; I'll try and chase follow
ups.
== String routines ==
* I posted the strchr and strlen routines to eglibc (libc-ports)
* On strchr the question of whether it was worth using the longer version
that's faster for longer strings (but slower for shorter strings) came
up. I posted
some stats, observations etc - and there is still a discussion on
going about it.
* For strlen, rth noted the same trick that I'd originally seen in newlib
(and for which RichardS and Ramana had suggested) of a quicker end-of-string
sequence using clz. I'd avoided this because I'd originally seen it
in newlib and
didn't want to copy it; but since 3 people have individually suggested it it
would seem using.
== Goodbye! ==
Thank you all for a fun & interesting year! I'm sure many of us
will meet online again in the future. I'll try and follow my
linaro.org address
while it's still live to check for any replies to any patches/comments etc.
Feel free to mail me at davidgil(a)uk.ibm.com (work) or dave(a)treblig.org (home);
for Linaro people I've also added some more contact methods at:
https://wiki.linaro.org/Internal/People/DaveGilbert/Contact
Thanks again!
Dave
anyone have a suggestion for this person?
-------- Original Message --------
Subject: New question: problem in installing Linaro tools on Ask Linaro
Date: Mon, 26 Dec 2011 21:31:57 -0800 (PST)
From: Ask Linaro <dnsadmin(a)linaro.org>
To: doanac <andy.doan(a)linaro.org>
Ask Linaro - Q & A forum for Linaro developers <http://ask.linaro.org/>
------------------------------------------------------------------------
Hello doanac,
chandrakala <http://ask.linaro.org/users/172/chandrakala> has just
posted a new question on Ask Linaro, entitled problem in installing
Linaro tools
<http://ask.linaro.org/questions/456/problem-in-installing-linaro-tools>
and tagged "/linaro <http://ask.linaro.org/tags/linaro/> installation
<http://ask.linaro.org/tags/installation/>/". Here's what it says:
Hi all,
Iam new to linux and gnu tools. i have downloaded linaro gnu tools
to install cortex-a8 on my ubuntu machine. iam able to successfully
install gcc tools. But when i try to install arm tools it is
throwing error. following are the commands used to install gnu tools
and the error it is generated
mckala@mckala:~/Desktop/gstreamer/gcc_objdir$
../gcc-linaro-4.6-2011.12/gcc-linaro-4.6-2011.12/configure
--target=arm-*-elf --disable-bootstrap --enable-languages=c,c++
--with-mode=thumb --with-arch=armv7-a --with-tune=cortex-a8
--with-fpu=neon --with-float=softfp
--prefix=/home/mckala/Desktop/gstreamer/gcc_objdir --disable-werror
--with-newlib
mckala@mckala:~/Desktop/gstreamer/gcc_objdir$ make all-host
mckala@mckala:~/Desktop/gstreamer/gcc_objdir$ make install-host
with this gnu tools installation is completed and i did not get any
error. when i used the following command to install cross compiler,
it is giving error
mckala@mckala:~/Desktop/gstreamer/gcc_objdir$ make
The error is
checking for suffix of object files... configure: error: in
|/home/mckala/Desktop/gstreamer/gcc_objdir/arm-*-elf/libgcc':
configure: error: cannot compute suffix of object files: cannot
compile See|config.log' for more details. make[1]: ***
[configure-target-libgcc] Error 1
config.log file is showing the following error.
gcc_objdir/arm-/-elf/bin/
-B/home/mckala/Desktop/gstreamer/gcc_objdir/arm-/-elf/lib/ -isystem
/home/mckala/Desktop/gstreamer/gcc_objdir/arm-/-elf/include -isystem
/home/mckala/Desktop/gstreamer/gcc_objdir/arm-/-elf/sys-include -V >&5
xgcc: fatal error: no input files compilation terminated.
Can any one please help on this.
Thanks in advance.
Don't forget to come over and cast your vote.
Thanks,
Ask Linaro
P.S. You can always fine-tune which notifications you receive here
<http://ask.linaro.org//users/16/doanac/subscriptions/>.
------------------------------------------------------------------------
I've posted all my WIP patches to this list over the last few days.
Please treat them kindly. :-) I've also tried to update the relevant
blueprints.
I pinged the 4.5 and 4.6 backports for lp736661 on gcc-patches last week,
then again this week, but there's obviously not likely to be much response
at this time of year. I therefore went ahead with the Linaro merges of
the branches rather than relying on them being committed to FSF branches
in time for next month's Linaro release. I'll continue to ping though.
If I've forgotten anything, or if you need more info, please don't
hesitate to ask. I'll continue to monitor my Linaro email address
as long as it remains active, although rdsandiford(a)googlemail.com
is likely to be a better bet.
With all that out of the way, I just wanted to say thank you to everyone
for making this a really enjoyable project to work on. It feels like
we managed to get through a fair number of new features, performance
improvements and bug fixes this year. I hope Linaro will be around
for a good few years yet and that it continues to go from strength
to strength.
Happy New Year, and all the best,
Richard
Here's the patch for sms-and-memory-dependencies. The idea is to bypass
the sched-deps.c {output,read,anti,true}_dependence tests altogether --
which is easy to do thanks to the note_mem_dep hook -- and instead handle
them in ddg.c. The ddg.c tests then use RTL loop iv analysis to try
to get longer distances on the memory dependencies. (Note that other
memory-related dependencies, such as those between volatile MEMs and
other volatile instructions, are still handled by sched-deps.c.)
Dependencies are now always created in pairs, so there's no need for
get_sched_window to set an upper bound when processing incoming MEM_DEPs,
or a lower bound when processing outgoing MEM_DEPs; we can rely on the
partnering edge to do that instead.
Richard
gcc/
* Makefile.in (ddg.o): Depend on $(TREE_PASS_H).
* ddg.h (REG_OR_MEM_DEP, REG_AND_MEM_DEP): Delete.
(ddg_mem_ref): New structure.
(ddg): Add loads and stores array.
(create_ddg): Add a loop argument.
(add_edges_to_ddg): Declare.
(MAX_DDG_DISTANCE): New macro.
* ddg.c: Include tree-pass.h.
(mem_ref_p, mark_mem_use, mark_mem_use_1, mem_read_insn_p)
(mark_mem_store, mem_write_insn_p, rtx_mem_access_p)
(mem_access_insn_p): Delete.
(create_mem_ref): New function.
(graph_and_node): New structure.
(record_loads, record_stores): New functions.
(create_ddg_dep_from_intra_loop_link): Treat all dependencies
as register dependencies.
(walk_mems_2, walk_mems_1, insns_may_alias_p, add_intra_loop_mem_dep)
(add_inter_loop_mem_dep): Delete.
(build_intra_loop_deps): Ignore memory dependencies created by
sched-deps.c. Don't handle memory dependencies here.
(measure_mem_distance, add_memory_dep): New functions.
(FOR_EACH_LATER_MEM_REF): New macro.
(build_memory_deps): New function.
(create_ddg): Take the loop as argument. Don't count loads and
stores here. Call iv_analysis_loop_init. Pass all loads to
record_loads and all stores to record_stores. Move edge
creation to...
(add_edges_to_ddg): ...this new function. Also call
build_memory_deps.
* modulo-sched.c (sat_mulpp, sat_addsp, sat_subsp): New functions.
(schedule_reg_moves): Only handle register dependencies.
(sms_schedule): Update call to create_ddg. Call iv_analysis_done
after creating all ddgs. Only set issue_rate if there are ddgs.
Only call setup_sched_infos and haifa_sched_init if there are ddgs.
Call add_edges_to_ddg before processing each ddg.
(get_sched_window): Use saturating arithmetic. Do not add an
implicit upper bound for incoming MEM_DEPs, or an implicit lower
bound for outgoing MEM_DEPs. Rework calculation of final window.
(calculate_must_precede_follow, compute_split_row): Use saturating
arithmetic.
Index: gcc/Makefile.in
===================================================================
--- gcc/Makefile.in 2011-12-30 13:13:45.077544981 +0000
+++ gcc/Makefile.in 2011-12-30 13:24:57.330195801 +0000
@@ -3316,7 +3316,7 @@ ddg.o : ddg.c $(DDG_H) $(CONFIG_H) $(SYS
$(DIAGNOSTIC_CORE_H) $(RTL_H) $(TM_P_H) $(REGS_H) $(FUNCTION_H) \
$(FLAGS_H) insn-config.h $(INSN_ATTR_H) $(EXCEPT_H) $(RECOG_H) \
$(SCHED_INT_H) $(CFGLAYOUT_H) $(CFGLOOP_H) $(EXPR_H) $(BITMAP_H) \
- hard-reg-set.h sbitmap.h $(TM_H)
+ hard-reg-set.h sbitmap.h $(TM_H) $(TREE_PASS_H)
modulo-sched.o : modulo-sched.c $(DDG_H) $(CONFIG_H) $(CONFIG_H) $(SYSTEM_H) \
coretypes.h $(TARGET_H) $(DIAGNOSTIC_CORE_H) $(RTL_H) $(TM_P_H) $(REGS_H) $(FUNCTION_H) \
$(FLAGS_H) insn-config.h $(INSN_ATTR_H) $(EXCEPT_H) $(RECOG_H) \
Index: gcc/ddg.h
===================================================================
--- gcc/ddg.h 2011-12-30 13:13:45.077544981 +0000
+++ gcc/ddg.h 2011-12-30 13:24:57.324195831 +0000
@@ -35,8 +35,7 @@ typedef struct ddg_scc *ddg_scc_ptr;
typedef struct ddg_all_sccs *ddg_all_sccs_ptr;
typedef enum {TRUE_DEP, OUTPUT_DEP, ANTI_DEP} dep_type;
-typedef enum {REG_OR_MEM_DEP, REG_DEP, MEM_DEP, REG_AND_MEM_DEP}
- dep_data_type;
+typedef enum {REG_DEP, MEM_DEP} dep_data_type;
/* The following two macros enables direct access to the successors and
predecessors bitmaps held in each ddg_node. Do not make changes to
@@ -44,6 +43,28 @@ typedef enum {REG_OR_MEM_DEP, REG_DEP, M
#define NODE_SUCCESSORS(x) ((x)->successors)
#define NODE_PREDECESSORS(x) ((x)->predecessors)
+/* A structure that represents a memory read or write in the DDG;
+ context decides which. */
+struct ddg_mem_ref {
+ /* The previous reference of the same type (read or write) in the DDG. */
+ struct ddg_mem_ref *prev;
+
+ /* The DDG node that contains the memory reference. */
+ ddg_node_ptr node;
+
+ /* The memory reference itself. */
+ rtx mem;
+
+ /* If the address is a known induction variable, its value in iteration
+ I is given by:
+
+ BASE + OFFSET + I * STEP
+
+ In other cases BASE is null. */
+ rtx base;
+ HOST_WIDE_INT offset, step;
+};
+
/* A structure that represents a node in the DDG. */
struct ddg_node
{
@@ -117,6 +138,11 @@ struct ddg
/* Number of instructions in the basic block. */
int num_nodes;
+ /* The loads and stores in the BB, from the end of the block to
+ the beginning. */
+ struct ddg_mem_ref *loads;
+ struct ddg_mem_ref *stores;
+
/* Number of load/store instructions in the BB - statistics. */
int num_loads;
int num_stores;
@@ -167,7 +193,9 @@ struct ddg_all_sccs
};
-ddg_ptr create_ddg (basic_block, int closing_branch_deps);
+struct loop;
+ddg_ptr create_ddg (struct loop *, basic_block, int closing_branch_deps);
+void add_edges_to_ddg (ddg_ptr);
void free_ddg (ddg_ptr);
void print_ddg (FILE *, ddg_ptr);
@@ -188,4 +216,7 @@ int longest_simple_path (ddg_ptr, int fr
bool autoinc_var_is_used_p (rtx, rtx);
+/* The maximum allowable distance on a DDG edge. */
+#define MAX_DDG_DISTANCE INT_MAX
+
#endif /* GCC_DDG_H */
Index: gcc/ddg.c
===================================================================
--- gcc/ddg.c 2011-12-30 13:13:45.077544981 +0000
+++ gcc/ddg.c 2011-12-30 13:36:35.005498271 +0000
@@ -43,6 +43,7 @@ Software Foundation; either version 3, o
#include "expr.h"
#include "bitmap.h"
#include "ddg.h"
+#include "tree-pass.h"
#ifdef INSN_SCHEDULING
@@ -61,88 +62,102 @@ static ddg_edge_ptr create_ddg_edge (ddg
dep_data_type, int, int);
static void add_edge_to_ddg (ddg_ptr g, ddg_edge_ptr);
-/* Auxiliary variable for mem_read_insn_p/mem_write_insn_p. */
-static bool mem_ref_p;
+/* Create a memory reference record for MEM, which occurs in NODE.
+ PREV is the previous reference of the same type. */
+static struct ddg_mem_ref *
+create_mem_ref (struct ddg_mem_ref *prev, ddg_node_ptr node, rtx mem)
+{
+ struct ddg_mem_ref *entry;
+ enum machine_mode pmode;
+ struct rtx_iv iv;
+ rtx x;
+
+ entry = XCNEW (struct ddg_mem_ref);
+ entry->prev = prev;
+ entry->node = node;
+ entry->mem = mem;
+
+ pmode = targetm.addr_space.address_mode (MEM_ADDR_SPACE (mem));
+ if (iv_analyze_expr (node->insn, XEXP (mem, 0), pmode, &iv)
+ && iv.extend == UNKNOWN
+ && CONST_INT_P (iv.step))
+ {
+ x = iv.base;
+ if (GET_CODE (x) == PLUS && CONST_INT_P (XEXP (x, 1)))
+ {
+ entry->base = XEXP (x, 0);
+ entry->offset = INTVAL (XEXP (x, 1));
+ }
+ else
+ {
+ entry->base = x;
+ entry->offset = 0;
+ }
+ entry->step = INTVAL (iv.step);
+ }
-/* Auxiliary function for mem_read_insn_p. */
-static int
-mark_mem_use (rtx *x, void *data ATTRIBUTE_UNUSED)
-{
- if (MEM_P (*x))
- mem_ref_p = true;
- return 0;
+ if (dump_file)
+ {
+ fprintf (dump_file, "Found memory reference in insn %d:\n",
+ INSN_UID (node->insn));
+ print_rtl (dump_file, mem);
+ if (entry->base)
+ {
+ fprintf (dump_file, "\nwith base:");
+ print_rtl (dump_file, entry->base);
+ fprintf (dump_file, "\noffset " HOST_WIDE_INT_PRINT_DEC
+ " and step " HOST_WIDE_INT_PRINT_DEC "\n\n",
+ entry->offset, entry->step);
+ }
+ else
+ fprintf (dump_file, "\nwhich isn't a recognized iv\n\n");
+ }
+ return entry;
}
-/* Auxiliary function for mem_read_insn_p. */
-static void
-mark_mem_use_1 (rtx *x, void *data)
-{
- for_each_rtx (x, mark_mem_use, data);
-}
+/* A structure for pairing a node and the graph to which it belongs. */
+struct graph_and_node {
+ ddg_ptr g;
+ ddg_node_ptr node;
+};
-/* Returns nonzero if INSN reads from memory. */
-static bool
-mem_read_insn_p (rtx insn)
+/* A for_each_rtx callback. Record all loads in an instruction.
+ DATA points to a graph_and_node. */
+static int
+record_loads_1 (rtx *loc, void *data)
{
- mem_ref_p = false;
- note_uses (&PATTERN (insn), mark_mem_use_1, NULL);
- return mem_ref_p;
-}
+ struct graph_and_node *gn;
-static void
-mark_mem_store (rtx loc, const_rtx setter ATTRIBUTE_UNUSED, void *data ATTRIBUTE_UNUSED)
-{
- if (MEM_P (loc))
- mem_ref_p = true;
+ if (MEM_P (*loc))
+ {
+ gn = (struct graph_and_node *) data;
+ gn->g->loads = create_mem_ref (gn->g->loads, gn->node, *loc);
+ gn->g->num_loads++;
+ }
+ return 0;
}
-/* Returns nonzero if INSN writes to memory. */
-static bool
-mem_write_insn_p (rtx insn)
+/* A note_uses callback. Record all loads in an instruction.
+ DATA points to a graph_and_node. */
+static void
+record_loads (rtx *loc, void *data)
{
- mem_ref_p = false;
- note_stores (PATTERN (insn), mark_mem_store, NULL);
- return mem_ref_p;
+ for_each_rtx (loc, record_loads_1, data);
}
-/* Returns nonzero if X has access to memory. */
-static bool
-rtx_mem_access_p (rtx x)
+/* A note_stores callback. Record all stores in an instruction.
+ DATA points to a graph_and_node. */
+static void
+record_stores (rtx x, const_rtx setter ATTRIBUTE_UNUSED, void *data)
{
- int i, j;
- const char *fmt;
- enum rtx_code code;
-
- if (x == 0)
- return false;
+ struct graph_and_node *gn;
if (MEM_P (x))
- return true;
-
- code = GET_CODE (x);
- fmt = GET_RTX_FORMAT (code);
- for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
{
- if (fmt[i] == 'e')
- {
- if (rtx_mem_access_p (XEXP (x, i)))
- return true;
- }
- else if (fmt[i] == 'E')
- for (j = 0; j < XVECLEN (x, i); j++)
- {
- if (rtx_mem_access_p (XVECEXP (x, i, j)))
- return true;
- }
+ gn = (struct graph_and_node *) data;
+ gn->g->stores = create_mem_ref (gn->g->stores, gn->node, x);
+ gn->g->num_stores++;
}
- return false;
-}
-
-/* Returns nonzero if INSN reads to or writes from memory. */
-static bool
-mem_access_insn_p (rtx insn)
-{
- return rtx_mem_access_p (PATTERN (insn));
}
/* Return true if DEF_INSN contains address being auto-inc or auto-dec
@@ -175,9 +190,6 @@ create_ddg_dep_from_intra_loop_link (ddg
ddg_edge_ptr e;
int latency, distance = 0;
dep_type t = TRUE_DEP;
- dep_data_type dt = (mem_access_insn_p (src_node->insn)
- && mem_access_insn_p (dest_node->insn) ? MEM_DEP
- : REG_DEP);
gcc_assert (src_node->cuid < dest_node->cuid);
gcc_assert (link);
@@ -201,7 +213,7 @@ create_ddg_dep_from_intra_loop_link (ddg
TODO: support the removal of all anti-deps edges, i.e. including those
whose register has multiple defs in the loop. */
if (flag_modulo_sched_allow_regmoves
- && (t == ANTI_DEP && dt == REG_DEP)
+ && t == ANTI_DEP
&& !autoinc_var_is_used_p (dest_node->insn, src_node->insn))
{
rtx set;
@@ -224,7 +236,7 @@ create_ddg_dep_from_intra_loop_link (ddg
}
latency = dep_cost (link);
- e = create_ddg_edge (src_node, dest_node, t, dt, latency, distance);
+ e = create_ddg_edge (src_node, dest_node, t, REG_DEP, latency, distance);
add_edge_to_ddg (g, e);
}
@@ -380,107 +392,6 @@ build_inter_loop_deps (ddg_ptr g)
}
}
-
-static int
-walk_mems_2 (rtx *x, rtx mem)
-{
- if (MEM_P (*x))
- {
- if (may_alias_p (*x, mem))
- return 1;
-
- return -1;
- }
- return 0;
-}
-
-static int
-walk_mems_1 (rtx *x, rtx *pat)
-{
- if (MEM_P (*x))
- {
- /* Visit all MEMs in *PAT and check indepedence. */
- if (for_each_rtx (pat, (rtx_function) walk_mems_2, *x))
- /* Indicate that dependence was determined and stop traversal. */
- return 1;
-
- return -1;
- }
- return 0;
-}
-
-/* Return 1 if two specified instructions have mem expr with conflict alias sets*/
-static int
-insns_may_alias_p (rtx insn1, rtx insn2)
-{
- /* For each pair of MEMs in INSN1 and INSN2 check their independence. */
- return for_each_rtx (&PATTERN (insn1), (rtx_function) walk_mems_1,
- &PATTERN (insn2));
-}
-
-/* Given two nodes, analyze their RTL insns and add intra-loop mem deps
- to ddg G. */
-static void
-add_intra_loop_mem_dep (ddg_ptr g, ddg_node_ptr from, ddg_node_ptr to)
-{
-
- if ((from->cuid == to->cuid)
- || !insns_may_alias_p (from->insn, to->insn))
- /* Do not create edge if memory references have disjoint alias sets
- or 'to' and 'from' are the same instruction. */
- return;
-
- if (mem_write_insn_p (from->insn))
- {
- if (mem_read_insn_p (to->insn))
- create_ddg_dep_no_link (g, from, to,
- DEBUG_INSN_P (to->insn)
- ? ANTI_DEP : TRUE_DEP, MEM_DEP, 0);
- else
- create_ddg_dep_no_link (g, from, to,
- DEBUG_INSN_P (to->insn)
- ? ANTI_DEP : OUTPUT_DEP, MEM_DEP, 0);
- }
- else if (!mem_read_insn_p (to->insn))
- create_ddg_dep_no_link (g, from, to, ANTI_DEP, MEM_DEP, 0);
-}
-
-/* Given two nodes, analyze their RTL insns and add inter-loop mem deps
- to ddg G. */
-static void
-add_inter_loop_mem_dep (ddg_ptr g, ddg_node_ptr from, ddg_node_ptr to)
-{
- if (!insns_may_alias_p (from->insn, to->insn))
- /* Do not create edge if memory references have disjoint alias sets. */
- return;
-
- if (mem_write_insn_p (from->insn))
- {
- if (mem_read_insn_p (to->insn))
- create_ddg_dep_no_link (g, from, to,
- DEBUG_INSN_P (to->insn)
- ? ANTI_DEP : TRUE_DEP, MEM_DEP, 1);
- else if (from->cuid != to->cuid)
- create_ddg_dep_no_link (g, from, to,
- DEBUG_INSN_P (to->insn)
- ? ANTI_DEP : OUTPUT_DEP, MEM_DEP, 1);
- }
- else
- {
- if (mem_read_insn_p (to->insn))
- return;
- else if (from->cuid != to->cuid)
- {
- create_ddg_dep_no_link (g, from, to, ANTI_DEP, MEM_DEP, 1);
- if (DEBUG_INSN_P (from->insn) || DEBUG_INSN_P (to->insn))
- create_ddg_dep_no_link (g, to, from, ANTI_DEP, MEM_DEP, 1);
- else
- create_ddg_dep_no_link (g, to, from, TRUE_DEP, MEM_DEP, 1);
- }
- }
-
-}
-
/* Perform intra-block Data Dependency analysis and connect the nodes in
the DDG. We assume the loop has a single basic block. */
static void
@@ -493,6 +404,9 @@ build_intra_loop_deps (ddg_ptr g)
/* Build the dependence information, using the sched_analyze function. */
init_deps_global ();
+ /* Ignore the usual dependencies between two MEM rtxes. We still rely
+ on sched_analyze to handle memory barriers and the like. */
+ sched_deps_info->note_mem_dep = 0;
init_deps (&tmp_deps, false);
/* Do the intra-block data dependence analysis for the given block. */
@@ -519,37 +433,6 @@ build_intra_loop_deps (ddg_ptr g)
create_ddg_dep_from_intra_loop_link (g, src_node, dest_node, dep);
}
-
- /* If this insn modifies memory, add an edge to all insns that access
- memory. */
- if (mem_access_insn_p (dest_node->insn))
- {
- int j;
-
- for (j = 0; j <= i; j++)
- {
- ddg_node_ptr j_node = &g->nodes[j];
- if (DEBUG_INSN_P (j_node->insn))
- continue;
- if (mem_access_insn_p (j_node->insn))
- {
- /* Don't bother calculating inter-loop dep if an intra-loop dep
- already exists. */
- if (! TEST_BIT (dest_node->successors, j))
- add_inter_loop_mem_dep (g, dest_node, j_node);
- /* If -fmodulo-sched-allow-regmoves
- is set certain anti-dep edges are not created.
- It might be that these anti-dep edges are on the
- path from one memory instruction to another such that
- removing these edges could cause a violation of the
- memory dependencies. Thus we add intra edges between
- every two memory instructions in this case. */
- if (flag_modulo_sched_allow_regmoves
- && !TEST_BIT (dest_node->predecessors, j))
- add_intra_loop_mem_dep (g, j_node, dest_node);
- }
- }
- }
}
/* Free the INSN_LISTs. */
@@ -560,13 +443,187 @@ build_intra_loop_deps (ddg_ptr g)
sched_free_deps (head, tail, false);
}
+/* Given a "source" memory reference from iteration 0 and a "target"
+ memory reference from iteration BASE_DISTANCE, return the first
+ N >= BASE_DISTANCE such that the source reference in iteration 0
+ overlaps the target reference in iteration N.
+
+ FROM_OFFSET is the offset of the source reference from an unspecified
+ base, while TO_OFFSET is the offset of the target reference from that
+ same base. FROM_SIZE and TO_SIZE are the sizes of the two references
+ in bytes.
+
+ PMODE is the mode of both addresses, and STEP is the amount that
+ will be added to each address by one loop iteration. */
+static int
+measure_mem_distance (enum machine_mode pmode,
+ unsigned HOST_WIDE_INT from_offset,
+ unsigned HOST_WIDE_INT from_size,
+ unsigned HOST_WIDE_INT to_offset,
+ unsigned HOST_WIDE_INT to_size,
+ unsigned HOST_WIDE_INT base_distance,
+ HOST_WIDE_INT step)
+{
+ unsigned HOST_WIDE_INT extra, from2to, to2from;
+
+ from2to = (to_offset - from_offset) & GET_MODE_MASK (pmode);
+ to2from = (from_offset - to_offset) & GET_MODE_MASK (pmode);
+ if (from2to < from_size || to2from < to_size)
+ /* The source reference in iteration 0 overlaps the target reference
+ in iteration BASE_DISTANCE. The check is written this way to cope
+ with cases where offset + size overflows. */
+ return base_distance;
+
+ /* N > BASE_DISTANCE. To cope more easily with cases where the round-up
+ divisions:
+
+ (to2from - (to_size - 1) + (step - 1)) / step
+ (from2to - (from_size - 1) + (step - 1)) / step
+
+ would overflow, bump BASE_DISTANCE and subtract STEP from each
+ dividend to compensate. */
+ base_distance++;
+ if (step > 0)
+ extra = (to2from - to_size) / (unsigned HOST_WIDE_INT) step;
+ else
+ extra = (from2to - from_size) / (unsigned HOST_WIDE_INT) -step;
+ if (extra > MAX_DDG_DISTANCE || base_distance + extra > MAX_DDG_DISTANCE)
+ return MAX_DDG_DISTANCE;
+ return base_distance + extra;
+}
+
+/* If FROM and TO might alias, record memory dependencies:
+
+ FROM--(FORWARD_TYPE)-->TO
+ and TO--(BACKWARD_TYPE)-->FROM
+
+ FROM comes before TO in the original loop, and both belong to G.
+ FORWARD_DISTANCE is the minimum distance of the FROM--->TO dependence. */
+static void
+add_memory_dep (ddg_ptr g, struct ddg_mem_ref *from,
+ struct ddg_mem_ref *to, dep_type forward_type,
+ dep_type backward_type, int forward_distance)
+{
+ HOST_WIDE_INT step;
+ unsigned HOST_WIDE_INT from_size, to_size, to_disp, abs_step, future_offset;
+ enum machine_mode pmode;
+ int backward_distance;
+
+ gcc_checking_assert (from->node->cuid < to->node->cuid);
+
+ if (!may_alias_p (from->mem, to->mem))
+ return;
+
+ /* In the worst case, the TO---->FROM edge has a distance of 1. */
+ backward_distance = 1;
+
+ /* See if we can get more accurate distances. Look for cases where
+ the addresses of FROM and TO are ivs with the same base and step. */
+ if (from->base
+ && to->base
+ && from->step
+ && from->step == to->step
+ && !MEM_VOLATILE_P (from->mem)
+ && !MEM_VOLATILE_P (to->mem)
+ && MEM_SIZE_KNOWN_P (from->mem)
+ && MEM_SIZE_KNOWN_P (to->mem)
+ && MEM_ADDR_SPACE (from->mem) == MEM_ADDR_SPACE (to->mem)
+ && rtx_equal_p (from->base, to->base))
+ {
+ step = to->step;
+ abs_step = (step < 0 ? -step : step);
+ from_size = MEM_SIZE (from->mem);
+ to_size = MEM_SIZE (to->mem);
+
+ /* If the step is a power of two, or the negative of a power of two,
+ see whether we can prove that the references never overlap. */
+ if (abs_step == (abs_step & -abs_step))
+ {
+ to_disp = (to->offset - from->offset) % abs_step;
+ if (from_size <= to_disp && to_disp + to_size <= abs_step)
+ return;
+ }
+
+ pmode = targetm.addr_space.address_mode (MEM_ADDR_SPACE (to->mem));
+ future_offset = to->offset + forward_distance * step;
+ forward_distance = measure_mem_distance (pmode,
+ from->offset, from_size,
+ future_offset, to_size,
+ forward_distance, step);
+ future_offset = from->offset + backward_distance * step;
+ backward_distance = measure_mem_distance (pmode,
+ to->offset, to_size,
+ future_offset, from_size,
+ backward_distance, step);
+ }
+
+ if (DEBUG_INSN_P (from->node->insn) || DEBUG_INSN_P (to->node->insn))
+ {
+ forward_type = ANTI_DEP;
+ backward_type = ANTI_DEP;
+ }
+ create_ddg_dep_no_link (g, from->node, to->node, forward_type, MEM_DEP,
+ forward_distance);
+ create_ddg_dep_no_link (g, to->node, from->node, backward_type, MEM_DEP,
+ backward_distance);
+}
+
+/* Make REF2 iterate over all entries in ddg_mem_ref list LIST
+ that come later than ddg_mem_ref REF1. */
+#define FOR_EACH_LATER_MEM_REF(REF2, REF1, LIST) \
+ for (REF2 = (LIST); \
+ REF2 && REF2->node->cuid > REF1->node->cuid; \
+ REF2 = REF2->prev)
+
+/* Check for dependencies between pairs of memory rtxes. */
+static void
+build_memory_deps (ddg_ptr g)
+{
+ struct ddg_mem_ref *ref1, *ref2;
+ int distance;
+
+ for (ref1 = g->loads; ref1; ref1 = ref1->prev)
+ {
+ /* LOAD--->LOAD. */
+ if (MEM_VOLATILE_P (ref1->mem))
+ FOR_EACH_LATER_MEM_REF (ref2, ref1, g->loads)
+ if (MEM_VOLATILE_P (ref2->mem))
+ add_memory_dep (g, ref1, ref2, ANTI_DEP, ANTI_DEP, 0);
+
+ /* LOAD--->STORE. */
+ FOR_EACH_LATER_MEM_REF (ref2, ref1, g->stores)
+ {
+ distance = anti_dependence (ref1->mem, ref2->mem) ? 0 : 1;
+ add_memory_dep (g, ref1, ref2, ANTI_DEP, TRUE_DEP, distance);
+ }
+ }
+
+ for (ref1 = g->stores; ref1; ref1 = ref1->prev)
+ {
+ /* STORE--->LOAD. */
+ FOR_EACH_LATER_MEM_REF (ref2, ref1, g->loads)
+ {
+ distance = true_dependence (ref1->mem, VOIDmode,
+ ref2->mem, rtx_varies_p) ? 0 : 1;
+ add_memory_dep (g, ref1, ref2, TRUE_DEP, ANTI_DEP, distance);
+ }
+
+ /* STORE--->STORE. */
+ FOR_EACH_LATER_MEM_REF (ref2, ref1, g->stores)
+ {
+ distance = output_dependence (ref1->mem, ref2->mem) ? 0 : 1;
+ add_memory_dep (g, ref1, ref2, OUTPUT_DEP, OUTPUT_DEP, distance);
+ }
+ }
+}
-/* Given a basic block, create its DDG and return a pointer to a variable
- of ddg type that represents it.
+/* Given a basic block, create the nodes of its DDG and return a pointer
+ to a variable of ddg type that represents it.
Initialize the ddg structure fields to the appropriate values. */
ddg_ptr
-create_ddg (basic_block bb, int closing_branch_deps)
+create_ddg (struct loop *loop, basic_block bb, int closing_branch_deps)
{
+ struct graph_and_node gn;
ddg_ptr g;
rtx insn, first_note;
int i;
@@ -586,13 +643,6 @@ create_ddg (basic_block bb, int closing_
if (DEBUG_INSN_P (insn))
g->num_debug++;
- else
- {
- if (mem_read_insn_p (insn))
- g->num_loads++;
- if (mem_write_insn_p (insn))
- g->num_stores++;
- }
num_nodes++;
}
@@ -603,6 +653,8 @@ create_ddg (basic_block bb, int closing_
return NULL;
}
+ iv_analysis_loop_init (loop);
+
/* Allocate the nodes array, and initialize the nodes. */
g->num_nodes = num_nodes;
g->nodes = (ddg_node_ptr) xcalloc (num_nodes, sizeof (struct ddg_node));
@@ -637,18 +689,31 @@ create_ddg (basic_block bb, int closing_
g->nodes[i].predecessors = sbitmap_alloc (num_nodes);
sbitmap_zero (g->nodes[i].predecessors);
g->nodes[i].first_note = (first_note ? first_note : insn);
- g->nodes[i++].insn = insn;
+ g->nodes[i].insn = insn;
first_note = NULL_RTX;
+
+ gn.g = g;
+ gn.node = &g->nodes[i];
+ note_uses (&PATTERN (insn), record_loads, &gn);
+ note_stores (PATTERN (insn), record_stores, &gn);
+
+ i++;
}
/* We must have found a branch in DDG. */
gcc_assert (g->closing_branch);
+ return g;
+}
+/* Add the edges to a DDG that was previously created by create_ddg.
+ This function relies on scheduler dependencies. */
- /* Build the data dependency graph. */
+void
+add_edges_to_ddg (ddg_ptr g)
+{
build_intra_loop_deps (g);
build_inter_loop_deps (g);
- return g;
+ build_memory_deps (g);
}
/* Free all the memory allocated for the DDG. */
Index: gcc/modulo-sched.c
===================================================================
--- gcc/modulo-sched.c 2011-12-30 13:13:45.077544981 +0000
+++ gcc/modulo-sched.c 2011-12-30 13:24:57.327195816 +0000
@@ -345,6 +345,38 @@ ps_num_consecutive_stages (partial_sched
return ps_reg_move (ps, id)->num_consecutive_stages;
}
+/* Perform a saturating multiplication of nonnegative values A and B. */
+
+static inline int
+sat_mulpp (unsigned int a, unsigned int b)
+{
+ if ((unsigned int) INT_MAX / b <= a)
+ return INT_MAX;
+ else
+ return a * b;
+}
+
+/* Perform a saturating addition of signed value A and nonnegative value B. */
+
+static inline int
+sat_addsp (int a, int b)
+{
+ if (INT_MAX - b <= a)
+ return INT_MAX;
+ return a + b;
+}
+
+/* Perform a saturating subtraction of signed value A and nonnegative
+ value B. */
+
+static inline int
+sat_subsp (int a, int b)
+{
+ if (INT_MIN + b >= a)
+ return INT_MIN;
+ return a - b;
+}
+
/* Given HEAD and TAIL which are the first and last insns in a loop;
return the register which controls the loop. Return zero if it has
more than one occurrence in the loop besides the control part or the
@@ -709,7 +741,9 @@ schedule_reg_moves (partial_schedule_ptr
ranges started at u (excluding self-loops). */
distances[0] = distances[1] = false;
for (e = u->out; e; e = e->next_out)
- if (e->type == TRUE_DEP && e->dest != e->src)
+ if (e->data_type == REG_DEP
+ && e->type == TRUE_DEP
+ && e->dest != e->src)
{
int nreg_moves4e = (SCHED_TIME (e->dest->cuid)
- SCHED_TIME (e->src->cuid)) / ii;
@@ -781,7 +815,9 @@ schedule_reg_moves (partial_schedule_ptr
copy of this register, depending on the time the use is scheduled.
Record which uses require which move results. */
for (e = u->out; e; e = e->next_out)
- if (e->type == TRUE_DEP && e->dest != e->src)
+ if (e->data_type == REG_DEP
+ && e->type == TRUE_DEP
+ && e->dest != e->src)
{
int dest_copy = (SCHED_TIME (e->dest->cuid)
- SCHED_TIME (e->src->cuid)) / ii;
@@ -1355,6 +1391,7 @@ sms_schedule (void)
basic_block condition_bb = NULL;
edge latch_edge;
gcov_type trip_count = 0;
+ int num_ddgs;
loop_optimizer_init (LOOPS_HAVE_PREHEADERS
| LOOPS_HAVE_RECORDED_EXITS);
@@ -1364,34 +1401,19 @@ sms_schedule (void)
return; /* There are no loops to schedule. */
}
- /* Initialize issue_rate. */
- if (targetm.sched.issue_rate)
- {
- int temp = reload_completed;
-
- reload_completed = 1;
- issue_rate = targetm.sched.issue_rate ();
- reload_completed = temp;
- }
- else
- issue_rate = 1;
-
- /* Initialize the scheduler. */
- setup_sched_infos ();
- haifa_sched_init ();
-
/* Allocate memory to hold the DDG array one entry for each loop.
We use loop->num as index into this array. */
g_arr = XCNEWVEC (ddg_ptr, number_of_loops ());
if (dump_file)
- {
- fprintf (dump_file, "\n\nSMS analysis phase\n");
- fprintf (dump_file, "===================\n\n");
- }
+ {
+ fprintf (dump_file, "\n\nSMS loop discovery phase\n");
+ fprintf (dump_file, "========================\n\n");
+ }
/* Build DDGs for all the relevant loops and hold them in G_ARR
indexed by the loop index. */
+ num_ddgs = 0;
FOR_EACH_LOOP (li, loop, 0)
{
rtx head, tail;
@@ -1512,7 +1534,7 @@ sms_schedule (void)
instructions. The branch is rotated to be in row ii-1 at the
end of the scheduling procedure to make sure it's the last
instruction in the iteration. */
- if (! (g = create_ddg (bb, 1)))
+ if (! (g = create_ddg (loop, bb, 1)))
{
if (dump_file)
fprintf (dump_file, "SMS create_ddg failed\n");
@@ -1523,12 +1545,38 @@ sms_schedule (void)
if (dump_file)
fprintf (dump_file, "...OK\n");
+ num_ddgs++;
+ }
+ iv_analysis_done ();
+
+ if (num_ddgs == 0)
+ {
+ if (dump_file)
+ fprintf (dump_file, "No suitable loops\n");
+ goto done;
}
+
+ /* Initialize issue_rate. */
+ if (targetm.sched.issue_rate)
+ {
+ int temp = reload_completed;
+
+ reload_completed = 1;
+ issue_rate = targetm.sched.issue_rate ();
+ reload_completed = temp;
+ }
+ else
+ issue_rate = 1;
+
+ /* Initialize the scheduler. */
+ setup_sched_infos ();
+ haifa_sched_init ();
+
if (dump_file)
- {
- fprintf (dump_file, "\nSMS transformation phase\n");
- fprintf (dump_file, "=========================\n\n");
- }
+ {
+ fprintf (dump_file, "\nSMS transformation phase\n");
+ fprintf (dump_file, "=========================\n\n");
+ }
/* We don't want to perform SMS on new loops - created by versioning. */
FOR_EACH_LOOP (li, loop, 0)
@@ -1542,6 +1590,8 @@ sms_schedule (void)
if (! (g = g_arr[loop->num]))
continue;
+ add_edges_to_ddg (g);
+
if (dump_file)
{
rtx insn = BB_END (loop->header);
@@ -1754,10 +1804,12 @@ sms_schedule (void)
free_ddg (g);
}
- free (g_arr);
-
/* Release scheduler data, needed until now because of DFA. */
haifa_sched_finish ();
+
+ done:
+ free (g_arr);
+
loop_optimizer_finalize ();
}
@@ -1844,6 +1896,7 @@ #define DFA_HISTORY SMS_DFA_HISTORY
/* A threshold for the number of repeated unsuccessful attempts to insert
an empty row, before we flush the partial schedule and start over. */
#define MAX_SPLIT_NUM 10
+
/* Given the partial schedule PS, this function calculates and returns the
cycles in which we can schedule the node with the given index I.
NOTE: Here we do the backtracking in SMS, in some special cases. We have
@@ -1896,7 +1949,7 @@ get_sched_window (partial_schedule_ptr p
fprintf (dump_file, "=========== =========== =========== ==========="
" =====\n");
}
- /* Calculate early_start and limit end. Both bounds are inclusive. */
+ /* Calculate early_start and limit start. Both bounds are inclusive. */
if (psp_not_empty)
for (e = u_node->in; e != 0; e = e->next_in)
{
@@ -1905,26 +1958,36 @@ get_sched_window (partial_schedule_ptr p
if (TEST_BIT (sched_nodes, v))
{
int p_st = SCHED_TIME (v);
- int earliest = p_st + e->latency - (e->distance * ii);
- int latest = (e->data_type == MEM_DEP ? p_st + ii - 1 : INT_MAX);
+ int earliest = sat_subsp (sat_addsp (p_st, e->latency),
+ sat_mulpp (e->distance, ii));
+ if (e->data_type == MEM_DEP)
+ {
+ start = MAX (start, earliest);
+ if (dump_file)
+ fprintf (dump_file, "%11d %11s %11s %11s",
+ earliest, "", "", "");
+ }
+ else
+ {
+ early_start = MAX (early_start, earliest);
+ if (dump_file)
+ fprintf (dump_file, "%11s %11d %11s %11s",
+ "", earliest, "", "");
+ }
if (dump_file)
{
- fprintf (dump_file, "%11s %11d %11s %11d %5d",
- "", earliest, "", latest, p_st);
+ fprintf (dump_file, " %5d", p_st);
print_ddg_edge (dump_file, e);
fprintf (dump_file, "\n");
}
- early_start = MAX (early_start, earliest);
- end = MIN (end, latest);
-
if (e->type == TRUE_DEP && e->data_type == REG_DEP)
count_preds++;
}
}
- /* Calculate late_start and limit start. Both bounds are inclusive. */
+ /* Calculate late_start and limit end. Both bounds are inclusive. */
if (pss_not_empty)
for (e = u_node->out; e != 0; e = e->next_out)
{
@@ -1933,20 +1996,30 @@ get_sched_window (partial_schedule_ptr p
if (TEST_BIT (sched_nodes, v))
{
int s_st = SCHED_TIME (v);
- int earliest = (e->data_type == MEM_DEP ? s_st - ii + 1 : INT_MIN);
- int latest = s_st - e->latency + (e->distance * ii);
+ int latest = sat_addsp (sat_subsp (s_st, e->latency),
+ sat_mulpp (e->distance, ii));
+ if (e->data_type == MEM_DEP)
+ {
+ end = MIN (end, latest);
+ if (dump_file)
+ fprintf (dump_file, "%11s %11s %11s %11d",
+ "", "", "", latest);
+ }
+ else
+ {
+ late_start = MIN (late_start, latest);
+ if (dump_file)
+ fprintf (dump_file, "%11s %11s %11d %11s",
+ "", "", latest, "");
+ }
if (dump_file)
{
- fprintf (dump_file, "%11d %11s %11d %11s %5d",
- earliest, "", latest, "", s_st);
+ fprintf (dump_file, " %5d", s_st);
print_ddg_edge (dump_file, e);
fprintf (dump_file, "\n");
}
- start = MAX (start, earliest);
- late_start = MIN (late_start, latest);
-
if (e->type == TRUE_DEP && e->data_type == REG_DEP)
count_succs++;
}
@@ -1963,14 +2036,22 @@ get_sched_window (partial_schedule_ptr p
/* Get a target scheduling window no bigger than ii. */
if (early_start == INT_MIN && late_start == INT_MAX)
- early_start = NODE_ASAP (u_node);
- else if (early_start == INT_MIN)
- early_start = late_start - (ii - 1);
- late_start = MIN (late_start, early_start + (ii - 1));
-
- /* Apply memory dependence limits. */
- start = MAX (start, early_start);
- end = MIN (end, late_start);
+ {
+ /* The default window (as given in the paper) is based on
+ the node's ASAP value, but shift or shrink it as necessary
+ in order to honor memory dependencies. */
+ early_start = MIN (NODE_ASAP (u_node), end - (ii - 1));
+ start = MAX (early_start, start);
+ }
+ else
+ {
+ end = MIN (end, late_start);
+ if (early_start == INT_MIN)
+ start = MAX (start, end - (ii - 1));
+ else
+ start = MAX (start, early_start);
+ }
+ end = MIN (end, start + (ii - 1));
if (dump_file && (psp_not_empty || pss_not_empty))
fprintf (dump_file, "%11s %11d %11d %11s %5s final window\n",
@@ -2060,8 +2141,8 @@ calculate_must_precede_follow (ddg_node_
SCHED_TIME (e->src) - (e->distance * ii) == first_cycle_in_window */
for (e = u_node->in; e != 0; e = e->next_in)
if (TEST_BIT (sched_nodes, e->src->cuid)
- && ((SCHED_TIME (e->src->cuid) - (e->distance * ii)) ==
- first_cycle_in_window))
+ && (sat_subsp (SCHED_TIME (e->src->cuid), sat_mulpp (e->distance, ii))
+ == first_cycle_in_window))
{
if (dump_file)
fprintf (dump_file, "%d ", e->src->cuid);
@@ -2371,7 +2452,8 @@ compute_split_row (sbitmap sched_nodes,
int v = e->src->cuid;
if (TEST_BIT (sched_nodes, v)
- && (low == SCHED_TIME (v) + e->latency - (e->distance * ii)))
+ && low == sat_subsp (sat_addsp (SCHED_TIME (v), e->latency),
+ sat_mulpp (e->distance, ii)))
if (SCHED_TIME (v) > lower)
{
crit_pred = v;
About three months ago, 4.7 stopped being able to optimise things like:
int *__restrict x = ...;
The (libav) loop microbenchmarks that I'd written used this construct
a lot, as an easy way of automatically generating a whole function
from a loop kernel.
I spent a while testing 4.7 with the restrict patch reverted, while
I caught up with my post-holiday email backlog and saw whether the
effect on this code was deliberate. I eventually realised it was,
so implemented a change that Ira had suggested: splitting out a
peak_loop_1 that takes all the restrict pointers as arguments.
I just realised that I never pushed that change back up to bzr,
so I've done it now.
Probably a write-only change, since I doubt anyone's going to be
using the benchmark again, but just in case :-)
Richard
This is my current 4.7 auto-inc-dec.c patch. I submitted an RFC in July:
http://article.gmane.org/gmane.comp.gcc.patches/241779/
and updated the patch in line with the feedback I got. Steven Bosscher
sent some very useful comments in private email, so the update deals
with those as well as Bernd's public ones.
If we do go ahead with this rewrite, it depends on the A9 pipeline
description changes. I submitted some A8 and A9 changes here:
http://article.gmane.org/gmane.comp.gcc.patches/244238/http://article.gmane.org/gmane.comp.gcc.patches/244242/
but because I later noticed that the A9 didn't behave quite as I thought,
I decided not to apply them. Ramana asked around internally about what
the A9 actually does (thanks) and had some ideas.
The patch also relies on the MEM rtx_costs patch that I just posted:
http://lists.linaro.org/pipermail/linaro-toolchain/2011-December/001944.html
Richard
gcc/
* Makefile.in (auto-inc-dec.o): Depends on $(OPTABS_H) and
addresses.h.
* auto-inc-dec.c: Rewrite.
Index: gcc/Makefile.in
===================================================================
--- gcc/Makefile.in 2011-12-07 11:43:29.549238252 +0000
+++ gcc/Makefile.in 2011-12-29 09:24:51.066303201 +0000
@@ -3145,7 +3145,8 @@ alloc-pool.o : alloc-pool.c $(CONFIG_H)
auto-inc-dec.o : auto-inc-dec.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
$(TREE_H) $(RTL_H) $(TM_P_H) hard-reg-set.h $(BASIC_BLOCK_H) insn-config.h \
$(REGS_H) $(FLAGS_H) output.h $(FUNCTION_H) $(EXCEPT_H) $(DIAGNOSTIC_CORE_H) $(RECOG_H) \
- $(EXPR_H) $(TIMEVAR_H) $(TREE_PASS_H) $(DF_H) $(DBGCNT_H) $(TARGET_H)
+ $(EXPR_H) $(TIMEVAR_H) $(TREE_PASS_H) $(DF_H) $(DBGCNT_H) $(TARGET_H) \
+ $(OPTABS_H) addresses.h
cfg.o : cfg.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(FLAGS_H) \
$(REGS_H) hard-reg-set.h output.h $(DIAGNOSTIC_CORE_H) $(FUNCTION_H) $(EXCEPT_H) $(GGC_H) \
$(TM_P_H) $(TIMEVAR_H) $(OBSTACK_H) $(TREE_H) alloc-pool.h \
Hi,
Thank you all for an interesting and pleasant experience. I am very
grateful to Linaro for the opportunity to meet and work with such an
amazing group of people. I wish you all the best, and hope to meet you
again (at least online).
You can find me at irar(a)il.ibm.com or ira.rsn(a)gmail.com.
Ira
Summary:
* Read armV7-A/R reference manual; crosstool-ng patches and wrapper scripts.
Details:
1. Patches for crosstool-ng:
* Fix symlink issue when CT_USE_SYSROOT is not enabled.
* Update sample/linaro-arm-none-eabi (baremetal) to disable
SYSROOT. So that both include and lib files are in the same dir.
2. Study armV7-A/R reference manual.
3. Validate embedded toolchain Dec. release.
4. Enhance the wrapper to use crosstool-ng for embedded toolchain.
Plan:
* Ramp-up on gcc.
Best regards!
-Zhenqiang
