August 2024 - Linux-kselftest-mirror

[PATCH nf-next v3 2/2] netfilter: Make IP6_NF_IPTABLES_LEGACY selectable

by Breno Leitao

This option makes IP6_NF_IPTABLES_LEGACY user selectable, giving users the option to configure iptables without enabling any other config. Signed-off-by: Breno Leitao <leitao(a)debian.org> --- net/ipv6/netfilter/Kconfig | 22 ++++++++++++---------- tools/testing/selftests/net/config | 5 +++++ 2 files changed, 17 insertions(+), 10 deletions(-) diff --git a/net/ipv6/netfilter/Kconfig b/net/ipv6/netfilter/Kconfig index f3c8e2d918e1..dad0a50d3ef4 100644 --- a/net/ipv6/netfilter/Kconfig +++ b/net/ipv6/netfilter/Kconfig @@ -8,7 +8,13 @@ menu "IPv6: Netfilter Configuration" # old sockopt interface and eval loop config IP6_NF_IPTABLES_LEGACY - tristate + tristate "Legacy IP6 tables support" + depends on INET && IPV6 + select NETFILTER_XTABLES + default n + help + ip6tables is a general, extensible packet identification legacy framework. + This is not needed if you are using iptables over nftables (iptables-nft). config NF_SOCKET_IPV6 tristate "IPv6 socket lookup support" @@ -190,7 +196,7 @@ config IP6_NF_TARGET_HL config IP6_NF_FILTER tristate "Packet filtering" default m if NETFILTER_ADVANCED=n - select IP6_NF_IPTABLES_LEGACY + depends on IP6_NF_IPTABLES_LEGACY tristate help Packet filtering defines a table `filter', which has a series of @@ -227,7 +233,7 @@ config IP6_NF_TARGET_SYNPROXY config IP6_NF_MANGLE tristate "Packet mangling" default m if NETFILTER_ADVANCED=n - select IP6_NF_IPTABLES_LEGACY + depends on IP6_NF_IPTABLES_LEGACY help This option adds a `mangle' table to iptables: see the man page for iptables(8). This table is used for various packet alterations @@ -237,7 +243,7 @@ config IP6_NF_MANGLE config IP6_NF_RAW tristate 'raw table support (required for TRACE)' - select IP6_NF_IPTABLES_LEGACY + depends on IP6_NF_IPTABLES_LEGACY help This option adds a `raw' table to ip6tables. This table is the very first in the netfilter framework and hooks in at the PREROUTING @@ -249,9 +255,7 @@ config IP6_NF_RAW # security table for MAC policy config IP6_NF_SECURITY tristate "Security table" - depends on SECURITY - depends on NETFILTER_ADVANCED - select IP6_NF_IPTABLES_LEGACY + depends on SECURITY && NETFILTER_ADVANCED && IP6_NF_IPTABLES_LEGACY help This option adds a `security' table to iptables, for use with Mandatory Access Control (MAC) policy. @@ -260,10 +264,8 @@ config IP6_NF_SECURITY config IP6_NF_NAT tristate "ip6tables NAT support" - depends on NF_CONNTRACK - depends on NETFILTER_ADVANCED + depends on NF_CONNTRACK && NETFILTER_ADVANCED && IP6_NF_IPTABLES_LEGACY select NF_NAT - select IP6_NF_IPTABLES_LEGACY select NETFILTER_XT_NAT help This enables the `nat' table in ip6tables. This allows masquerading, diff --git a/tools/testing/selftests/net/config b/tools/testing/selftests/net/config index 90e997cfa12e..e534144c75ea 100644 --- a/tools/testing/selftests/net/config +++ b/tools/testing/selftests/net/config @@ -35,12 +35,16 @@ CONFIG_IPV6_SIT=y CONFIG_IP_DCCP=m CONFIG_NF_NAT=m CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_IPTABLES_LEGACY=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_IPTABLES_LEGACY=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_MANGLE=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_NAT=m CONFIG_IP6_NF_RAW=m CONFIG_IP_NF_NAT=m @@ -61,6 +65,7 @@ CONFIG_NF_TABLES=m CONFIG_NF_TABLES_IPV6=y CONFIG_NF_TABLES_IPV4=y CONFIG_NF_REJECT_IPV4=y +CONFIG_NF_REJECT_IPV6=y CONFIG_NFT_NAT=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NET_ACT_CSUM=m -- 2.43.5

8 months, 2 weeks

1
0
0 0

kselftest/next build: 7 builds: 2 failed, 5 passed, 1 warning (v6.11-rc1-16-g611fbeb44a777)

by kernelci.org bot

kselftest/next build: 7 builds: 2 failed, 5 passed, 1 warning (v6.11-rc1-16-g611fbeb44a777) Full Build Summary: https://kernelci.org/build/kselftest/branch/next/kernel/v6.11-rc1-16-g611fb… Tree: kselftest Branch: next Git Describe: v6.11-rc1-16-g611fbeb44a777 Git Commit: 611fbeb44a777e5ab54ab3127ec85f72147911d8 Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git Built: 4 unique architectures Build Failures Detected: arm64: defconfig+kselftest+arm64-chromebook: (clang-16) FAIL defconfig+kselftest+arm64-chromebook: (gcc-12) FAIL Warnings Detected: arm64: arm: i386: x86_64: x86_64_defconfig+kselftest (clang-16): 1 warning Warnings summary: 1 vmlinux.o: warning: objtool: set_ftrace_ops_ro+0x39: relocation to !ENDBR: .text+0x14ef94 ================================================================================ Detailed per-defconfig build reports: -------------------------------------------------------------------------------- defconfig+kselftest (arm64, gcc-12) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, gcc-12) — FAIL, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, clang-16) — FAIL, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- i386_defconfig+kselftest (i386, gcc-12) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- multi_v7_defconfig+kselftest (arm, gcc-12) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, gcc-12) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, clang-16) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: vmlinux.o: warning: objtool: set_ftrace_ops_ro+0x39: relocation to !ENDBR: .text+0x14ef94 --- For more info write to <info(a)kernelci.org>

8 months, 2 weeks

1
0
0 0

[PATCH v3] Documentation: KUnit: Update filename best practices

by Kees Cook

Based on feedback from Linus[1] and follow-up discussions, change the suggested file naming for KUnit tests. Link: https://lore.kernel.org/lkml/CAHk-=wgim6pNiGTBMhP8Kd3tsB7_JTAuvNJ=XYd3wPvvk… [1] Reviewed-by: John Hubbard <jhubbard(a)nvidia.com> Signed-off-by: Kees Cook <kees(a)kernel.org> --- v3: additional clarification v2: https://lore.kernel.org/all/20240720165441.it.320-kees@kernel.org/ Cc: David Gow <davidgow(a)google.com> Cc: Brendan Higgins <brendan.higgins(a)linux.dev> Cc: Rae Moar <rmoar(a)google.com> Cc: John Hubbard <jhubbard(a)nvidia.com> Cc: Jonathan Corbet <corbet(a)lwn.net> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: linux-kselftest(a)vger.kernel.org Cc: kunit-dev(a)googlegroups.com Cc: linux-doc(a)vger.kernel.org Cc: linux-kernel(a)vger.kernel.org Cc: linux-hardening(a)vger.kernel.org --- Documentation/dev-tools/kunit/style.rst | 29 +++++++++++++++++-------- 1 file changed, 20 insertions(+), 9 deletions(-) diff --git a/Documentation/dev-tools/kunit/style.rst b/Documentation/dev-tools/kunit/style.rst index b6d0d7359f00..eac81a714a29 100644 --- a/Documentation/dev-tools/kunit/style.rst +++ b/Documentation/dev-tools/kunit/style.rst @@ -188,15 +188,26 @@ For example, a Kconfig entry might look like: Test File and Module Names ========================== -KUnit tests can often be compiled as a module. These modules should be named -after the test suite, followed by ``_test``. If this is likely to conflict with -non-KUnit tests, the suffix ``_kunit`` can also be used. +KUnit tests are often compiled as a separate module. To avoid conflicting +with regular modules, KUnit modules should be named after the test suite, +followed by ``_kunit`` (e.g. if "foobar" is the core module, then +"foobar_kunit" is the KUnit test module). -The easiest way of achieving this is to name the file containing the test suite -``<suite>_test.c`` (or, as above, ``<suite>_kunit.c``). This file should be -placed next to the code under test. +Test source files, whether compiled as a separate module or an +``#include`` in another source file, are best kept in a ``tests/`` +subdirectory to not conflict with other source files (e.g. for +tab-completion). + +Note that the ``_test`` suffix has also been used in some existing +tests. The ``_kunit`` suffix is preferred, as it makes the distinction +between KUnit and non-KUnit tests clearer. + +So for the common case, name the file containing the test suite +``tests/<suite>_kunit.c``. The ``tests`` directory should be placed at +the same level as the code under test. For example, tests for +``lib/string.c`` live in ``lib/tests/string_kunit.c``. If the suite name contains some or all of the name of the test's parent -directory, it may make sense to modify the source filename to reduce redundancy. -For example, a ``foo_firmware`` suite could be in the ``foo/firmware_test.c`` -file. +directory, it may make sense to modify the source filename to reduce +redundancy. For example, a ``foo_firmware`` suite could be in the +``foo/tests/firmware_kunit.c`` file. -- 2.34.1

8 months, 2 weeks

3
3
0 0

[PATCH v1] selftests:tdx:Use min macro

by Yan Zhen

Using the min macro is usually more intuitive and readable. Signed-off-by: Yan Zhen <yanzhen(a)vivo.com> --- tools/testing/selftests/tdx/tdx_guest_test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/tdx/tdx_guest_test.c b/tools/testing/selftests/tdx/tdx_guest_test.c index 81d8cb88e..d7ddf5307 100644 --- a/tools/testing/selftests/tdx/tdx_guest_test.c +++ b/tools/testing/selftests/tdx/tdx_guest_test.c @@ -118,7 +118,7 @@ static void print_array_hex(const char *title, const char *prefix_str, printf("\t\t%s", title); for (j = 0; j < len; j += rowsize) { - line_len = rowsize < (len - j) ? rowsize : (len - j); + line_len = min((len - j), rowsize); printf("%s%.8x:", prefix_str, j); for (i = 0; i < line_len; i++) printf(" %.2x", ptr[j + i]); -- 2.34.1

8 months, 2 weeks

3
2
0 0

[PATCH net-next v6 25/25] testing/selftest: add test tool and scripts for ovpn module

by Antonio Quartulli

The ovpn-cli tool can be compiled and used as selftest for the ovpn kernel module. It implementes the netlink API and can thus be integrated in any script for more automated testing. Along with the tool, 2 scripts are added that perform basic functionality tests by means of network namespaces. The scripts can be performed in sequence by running run.sh Cc: shuah(a)kernel.org Cc: linux-kselftest(a)vger.kernel.org Signed-off-by: Antonio Quartulli <antonio(a)openvpn.net> --- tools/testing/selftests/Makefile | 1 + tools/testing/selftests/net/ovpn/.gitignore | 2 + tools/testing/selftests/net/ovpn/Makefile | 17 + tools/testing/selftests/net/ovpn/config | 8 + .../selftests/net/ovpn/data-test-tcp.sh | 9 + tools/testing/selftests/net/ovpn/data-test.sh | 150 ++ tools/testing/selftests/net/ovpn/data64.key | 5 + .../testing/selftests/net/ovpn/float-test.sh | 115 ++ tools/testing/selftests/net/ovpn/ovpn-cli.c | 1820 +++++++++++++++++ .../testing/selftests/net/ovpn/tcp_peers.txt | 1 + .../testing/selftests/net/ovpn/udp_peers.txt | 5 + 11 files changed, 2133 insertions(+) create mode 100644 tools/testing/selftests/net/ovpn/.gitignore create mode 100644 tools/testing/selftests/net/ovpn/Makefile create mode 100644 tools/testing/selftests/net/ovpn/config create mode 100755 tools/testing/selftests/net/ovpn/data-test-tcp.sh create mode 100755 tools/testing/selftests/net/ovpn/data-test.sh create mode 100644 tools/testing/selftests/net/ovpn/data64.key create mode 100755 tools/testing/selftests/net/ovpn/float-test.sh create mode 100644 tools/testing/selftests/net/ovpn/ovpn-cli.c create mode 100644 tools/testing/selftests/net/ovpn/tcp_peers.txt create mode 100644 tools/testing/selftests/net/ovpn/udp_peers.txt diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index a5f1c0c27dff..c293f2717708 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -66,6 +66,7 @@ TARGETS += net/forwarding TARGETS += net/hsr TARGETS += net/mptcp TARGETS += net/openvswitch +TARGETS += net/ovpn TARGETS += net/tcp_ao TARGETS += net/netfilter TARGETS += net/rds diff --git a/tools/testing/selftests/net/ovpn/.gitignore b/tools/testing/selftests/net/ovpn/.gitignore new file mode 100644 index 000000000000..ee44c081ca7c --- /dev/null +++ b/tools/testing/selftests/net/ovpn/.gitignore @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0+ +ovpn-cli diff --git a/tools/testing/selftests/net/ovpn/Makefile b/tools/testing/selftests/net/ovpn/Makefile new file mode 100644 index 000000000000..171cf047497c --- /dev/null +++ b/tools/testing/selftests/net/ovpn/Makefile @@ -0,0 +1,17 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2020-2024 OpenVPN, Inc. +# +CFLAGS = -Wall -I../../../../../usr/include +CFLAGS += $(shell pkg-config --cflags libnl-3.0 libnl-genl-3.0) + +LDFLAGS = -lmbedtls -lmbedcrypto +LDFLAGS += $(shell pkg-config --libs libnl-3.0 libnl-genl-3.0) + +ovpn-cli: ovpn-cli.c + +TEST_PROGS = data-test.sh \ + data-test-tcp.sh \ + float-test.sh +TEST_GEN_FILES = ovpn-cli + +include ../../lib.mk diff --git a/tools/testing/selftests/net/ovpn/config b/tools/testing/selftests/net/ovpn/config new file mode 100644 index 000000000000..5ff47de23c12 --- /dev/null +++ b/tools/testing/selftests/net/ovpn/config @@ -0,0 +1,8 @@ +CONFIG_NET=y +CONFIG_INET=y +CONFIG_NET_UDP_TUNNEL=y +CONFIG_DST_CACHE=y +CONFIG_CRYPTO_AES=y +CONFIG_CRYPTO_GCM=y +CONFIG_CRYPTO_CHACHA20POLY1305=y +CONFIG_OVPN=y diff --git a/tools/testing/selftests/net/ovpn/data-test-tcp.sh b/tools/testing/selftests/net/ovpn/data-test-tcp.sh new file mode 100755 index 000000000000..65f05659b5fd --- /dev/null +++ b/tools/testing/selftests/net/ovpn/data-test-tcp.sh @@ -0,0 +1,9 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2024 OpenVPN, Inc. +# +# Author: Antonio Quartulli <antonio(a)openvpn.net> + +PROTO="TCP" + +source data-test.sh diff --git a/tools/testing/selftests/net/ovpn/data-test.sh b/tools/testing/selftests/net/ovpn/data-test.sh new file mode 100755 index 000000000000..8468defb1f1c --- /dev/null +++ b/tools/testing/selftests/net/ovpn/data-test.sh @@ -0,0 +1,150 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2020-2024 OpenVPN, Inc. +# +# Author: Antonio Quartulli <antonio(a)openvpn.net> + +#set -x +set -e + +UDP_PEERS_FILE=${UDP_PEERS_FILE:-udp_peers.txt} +TCP_PEERS_FILE=${TCP_PEERS_FILE:-tcp_peers.txt} +OVPN_CLI=${OVPN_CLI:-./ovpn-cli} +ALG=${ALG:-aes} +PROTO=${PROTO:-UDP} + +create_ns() { + ip netns add peer${1} +} + +setup_ns() { + MODE="P2P" + + if [ ${1} -eq 0 ]; then + MODE="MP" + for p in $(seq 1 ${NUM_PEERS}); do + ip link add veth${p} netns peer0 type veth peer name veth${p} netns peer${p} + + ip -n peer0 addr add 10.10.${p}.1/24 dev veth${p} + ip -n peer0 link set veth${p} up + + ip -n peer${p} addr add 10.10.${p}.2/24 dev veth${p} + ip -n peer${p} link set veth${p} up + done + fi + + ip netns exec peer${1} ${OVPN_CLI} new_iface tun${1} $MODE + ip -n peer${1} addr add ${2} dev tun${1} + ip -n peer${1} link set tun${1} up +} + +add_peer() { + if [ "${PROTO}" == "UDP" ]; then + if [ ${1} -eq 0 ]; then + ip netns exec peer0 ${OVPN_CLI} new_multi_peer tun0 1 ${UDP_PEERS_FILE} + + for p in $(seq 1 ${NUM_PEERS}); do + # ip netns exec peer0 ${OVPN_CLI} new_peer tun0 ${p} ${p} 10.10.${p}.2 1 5.5.5.$((${p} + 1)) + + ip netns exec peer0 ${OVPN_CLI} new_key tun0 ${p} 1 0 ${ALG} 0 data64.key + done + else + ip netns exec peer${1} ${OVPN_CLI} new_peer tun${1} 1 ${1} 10.10.${1}.1 1 + ip netns exec peer${1} ${OVPN_CLI} new_key tun${1} ${1} 1 0 ${ALG} 1 data64.key + fi + else + if [ ${1} -eq 0 ]; then + (ip netns exec peer0 ${OVPN_CLI} listen tun0 1 ${TCP_PEERS_FILE} && { + for p in $(seq 1 ${NUM_PEERS}); do + ip netns exec peer0 ${OVPN_CLI} new_key tun0 ${p} 1 0 ${ALG} 0 data64.key + done + }) & + sleep 5 + else + ip netns exec peer${1} ${OVPN_CLI} connect tun${1} ${1} 10.10.${1}.1 1 data64.key + fi + fi +} + +cleanup() { + for p in $(seq 1 10); do + ip -n peer0 link del veth${p} 2>/dev/null || true + done + for p in $(seq 0 10); do + ip netns exec peer${p} ${OVPN_CLI} del_iface tun${p} 2>/dev/null || true + ip netns del peer${p} 2>/dev/null || true + done +} + +if [ "${PROTO}" == "UDP" ]; then + NUM_PEERS=${NUM_PEERS:-$(wc -l ${UDP_PEERS_FILE} | awk '{print $1}')} +else + NUM_PEERS=${NUM_PEERS:-$(wc -l ${TCP_PEERS_FILE} | awk '{print $1}')} +fi + +cleanup + +for p in $(seq 0 ${NUM_PEERS}); do + create_ns ${p} +done + +for p in $(seq 0 ${NUM_PEERS}); do + setup_ns ${p} 5.5.5.$((${p} + 1))/24 +done + +for p in $(seq 0 ${NUM_PEERS}); do + add_peer ${p} +done + +for p in $(seq 1 ${NUM_PEERS}); do + ip netns exec peer0 ${OVPN_CLI} set_peer tun0 ${p} 60 120 + ip netns exec peer${p} ${OVPN_CLI} set_peer tun${p} ${p} 60 120 +done + +for p in $(seq 1 ${NUM_PEERS}); do + ip netns exec peer0 ping -qfc 1000 -w 5 5.5.5.$((${p} + 1)) +done + +ip netns exec peer0 iperf3 -1 -s & +sleep 1 +ip netns exec peer1 iperf3 -Z -t 3 -c 5.5.5.1 + +for p in $(seq 1 ${NUM_PEERS}); do + ip netns exec peer0 ${OVPN_CLI} new_key tun0 ${p} 2 1 ${ALG} 0 data64.key + ip netns exec peer${p} ${OVPN_CLI} new_key tun${p} ${p} 2 1 ${ALG} 1 data64.key + ip netns exec peer${p} ${OVPN_CLI} swap_keys tun${p} ${p} +done + +sleep 1 +echo "Querying all peers:" +ip netns exec peer0 ${OVPN_CLI} get_peer tun0 +ip netns exec peer1 ${OVPN_CLI} get_peer tun1 + +echo "Querying peer 1:" +ip netns exec peer0 ${OVPN_CLI} get_peer tun0 1 + +echo "Querying non-existent peer 10:" +ip netns exec peer0 ${OVPN_CLI} get_peer tun0 10 || true + +ip netns exec peer0 ${OVPN_CLI} del_peer tun0 1 + +echo "Setting timeout to 10s MP:" +# bring ifaces down to prevent traffic being sent +for p in $(seq 0 ${NUM_PEERS}); do + ip -n peer${p} link set tun${p} down +done +# set short timeout +for p in $(seq 1 ${NUM_PEERS}); do + ip netns exec peer0 ${OVPN_CLI} set_peer tun0 ${p} 10 10 || true + ip netns exec peer${p} ${OVPN_CLI} set_peer tun${p} ${p} 0 0 +done +# wait for peers to timeout +sleep 15 + +echo "Setting timeout to 10s P2P:" +for p in $(seq 1 ${NUM_PEERS}); do + ip netns exec peer${p} ${OVPN_CLI} set_peer tun${p} ${p} 10 10 +done +sleep 15 + +cleanup diff --git a/tools/testing/selftests/net/ovpn/data64.key b/tools/testing/selftests/net/ovpn/data64.key new file mode 100644 index 000000000000..a99e88c4e290 --- /dev/null +++ b/tools/testing/selftests/net/ovpn/data64.key @@ -0,0 +1,5 @@ +jRqMACN7d7/aFQNT8S7jkrBD8uwrgHbG5OQZP2eu4R1Y7tfpS2bf5RHv06Vi163CGoaIiTX99R3B +ia9ycAH8Wz1+9PWv51dnBLur9jbShlgZ2QHLtUc4a/gfT7zZwULXuuxdLnvR21DDeMBaTbkgbai9 +uvAa7ne1liIgGFzbv+Bas4HDVrygxIxuAnP5Qgc3648IJkZ0QEXPF+O9f0n5+QIvGCxkAUVx+5K6 +KIs+SoeWXnAopELmoGSjUpFtJbagXK82HfdqpuUxT2Tnuef0/14SzVE/vNleBNu2ZbyrSAaah8tE +BofkPJUBFY+YQcfZNM5Dgrw3i+Bpmpq/gpdg5w== diff --git a/tools/testing/selftests/net/ovpn/float-test.sh b/tools/testing/selftests/net/ovpn/float-test.sh new file mode 100755 index 000000000000..5e113b767e78 --- /dev/null +++ b/tools/testing/selftests/net/ovpn/float-test.sh @@ -0,0 +1,115 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2020-2024 OpenVPN, Inc. +# +# Author: Antonio Quartulli <antonio(a)openvpn.net> + +#set -x +set -e + +UDP_PEERS_FILE=${UDP_PEERS_FILE:-udp_peers.txt} +TCP_PEERS_FILE=${TCP_PEERS_FILE:-tcp_peers.txt} +OVPN_CLI=${OVPN_CLI:-./ovpn-cli} +ALG=${ALG:-aes} +PROTO=${PROTO:-UDP} + +create_ns() { + ip netns add peer${1} +} + +setup_ns() { + MODE="P2P" + + if [ ${1} -eq 0 ]; then + MODE="MP" + for p in $(seq 1 ${NUM_PEERS}); do + ip link add veth${p} netns peer0 type veth peer name veth${p} netns peer${p} + + ip -n peer0 addr add 10.10.${p}.1/24 dev veth${p} + ip -n peer0 link set veth${p} up + + ip -n peer${p} addr add 10.10.${p}.2/24 dev veth${p} + ip -n peer${p} link set veth${p} up + done + fi + + ip netns exec peer${1} ${OVPN_CLI} new_iface tun${1} $MODE + ip -n peer${1} addr add ${2} dev tun${1} + ip -n peer${1} link set tun${1} up +} + +add_peer() { + if [ "${PROTO}" == "UDP" ]; then + if [ ${1} -eq 0 ]; then + ip netns exec peer0 ${OVPN_CLI} new_multi_peer tun0 1 ${UDP_PEERS_FILE} + + for p in $(seq 1 ${NUM_PEERS}); do + # ip netns exec peer0 ${OVPN_CLI} new_peer tun0 ${p} ${p} 10.10.${p}.2 1 5.5.5.$((${p} + 1)) + ip netns exec peer0 ${OVPN_CLI} new_key tun0 ${p} 1 0 ${ALG} 0 data64.key + done + else + ip netns exec peer${1} ${OVPN_CLI} new_peer tun${1} 1 ${1} 10.10.${1}.1 1 + ip netns exec peer${1} ${OVPN_CLI} new_key tun${1} ${1} 1 0 ${ALG} 1 data64.key + fi + else + if [ ${1} -eq 0 ]; then + (ip netns exec peer0 ${OVPN_CLI} listen tun0 1 ${TCP_PEERS_FILE} && { + for p in $(seq 1 ${NUM_PEERS}); do + ip netns exec peer0 ${OVPN_CLI} new_key tun0 ${p} 1 0 ${ALG} 0 data64.key + done + }) & + sleep 5 + else + ip netns exec peer${1} ${OVPN_CLI} connect tun${1} ${1} 10.10.${1}.1 1 5.5.5.1 data64.key + fi + fi +} + +cleanup() { + for p in $(seq 1 10); do + ip -n peer0 link del veth${p} 2>/dev/null || true + done + for p in $(seq 0 10); do + ip netns exec peer${p} ${OVPN_CLI} del_iface tun${p} 2>/dev/null || true + ip netns del peer${p} 2>/dev/null || true + done +} + +if [ "${PROTO}" == "UDP" ]; then + NUM_PEERS=${NUM_PEERS:-$(wc -l ${UDP_PEERS_FILE} | awk '{print $1}')} +else + NUM_PEERS=${NUM_PEERS:-$(wc -l ${TCP_PEERS_FILE} | awk '{print $1}')} +fi + +cleanup + +for p in $(seq 0 ${NUM_PEERS}); do + create_ns ${p} +done + +for p in $(seq 0 ${NUM_PEERS}); do + setup_ns ${p} 5.5.5.$((${p} + 1))/24 +done + +for p in $(seq 0 ${NUM_PEERS}); do + add_peer ${p} +done + +for p in $(seq 1 ${NUM_PEERS}); do + ip netns exec peer0 ${OVPN_CLI} set_peer tun0 ${p} 60 120 + ip netns exec peer${p} ${OVPN_CLI} set_peer tun${p} ${p} 60 120 +done + +for p in $(seq 1 ${NUM_PEERS}); do + ip netns exec peer0 ping -qfc 1000 -w 5 5.5.5.$((${p} + 1)) +done +# make clients float.. +for p in $(seq 1 ${NUM_PEERS}); do + ip -n peer${p} addr del 10.10.${p}.2/24 dev veth${p} + ip -n peer${p} addr add 10.10.${p}.3/24 dev veth${p} +done +for p in $(seq 1 ${NUM_PEERS}); do + ip netns exec peer${p} ping -qfc 1000 -w 5 5.5.5.1 +done + +cleanup diff --git a/tools/testing/selftests/net/ovpn/ovpn-cli.c b/tools/testing/selftests/net/ovpn/ovpn-cli.c new file mode 100644 index 000000000000..a10ad4881f13 --- /dev/null +++ b/tools/testing/selftests/net/ovpn/ovpn-cli.c @@ -0,0 +1,1820 @@ +// SPDX-License-Identifier: GPL-2.0 +/* OpenVPN data channel accelerator + * + * Copyright (C) 2020-2024 OpenVPN, Inc. + * + * Author: Antonio Quartulli <antonio(a)openvpn.net> + */ + +#include <stdio.h> +#include <inttypes.h> +#include <stdbool.h> +#include <string.h> +#include <errno.h> +#include <unistd.h> +#include <arpa/inet.h> +#include <net/if.h> +#include <netinet/in.h> + +#include <linux/ovpn.h> +#include <linux/types.h> +#include <linux/netlink.h> + +#include <netlink/socket.h> +#include <netlink/netlink.h> +#include <netlink/genl/genl.h> +#include <netlink/genl/family.h> +#include <netlink/genl/ctrl.h> + +#include <mbedtls/base64.h> +#include <mbedtls/error.h> + +#include <sys/socket.h> + +/* we use strscpy to make checkpatch happy */ +#define strscpy strncpy + +/* libnl < 3.5.0 does not set the NLA_F_NESTED on its own, therefore we + * have to explicitly do it to prevent the kernel from failing upon + * parsing of the message + */ +#define nla_nest_start(_msg, _type) \ + nla_nest_start(_msg, (_type) | NLA_F_NESTED) + +uint64_t nla_get_uint(struct nlattr *attr) +{ + if (nla_len(attr) == sizeof(uint32_t)) + return nla_get_u32(attr); + else + return nla_get_u64(attr); +} + +typedef int (*ovpn_nl_cb)(struct nl_msg *msg, void *arg); + +enum ovpn_key_direction { + KEY_DIR_IN = 0, + KEY_DIR_OUT, +}; + +#define KEY_LEN (256 / 8) +#define NONCE_LEN 8 + +#define PEER_ID_UNDEF 0x00FFFFFF + +struct nl_ctx { + struct nl_sock *nl_sock; + struct nl_msg *nl_msg; + struct nl_cb *nl_cb; + + int ovpn_dco_id; +}; + +struct ovpn_ctx { + __u8 key_enc[KEY_LEN]; + __u8 key_dec[KEY_LEN]; + __u8 nonce[NONCE_LEN]; + + enum ovpn_cipher_alg cipher; + + sa_family_t sa_family; + + __u32 peer_id; + __u16 lport; + + union { + struct sockaddr_in in4; + struct sockaddr_in6 in6; + } remote; + + union { + struct sockaddr_in in4; + struct sockaddr_in6 in6; + } peer_ip; + + bool peer_ip_set; + + unsigned int ifindex; + char ifname[IFNAMSIZ]; + enum ovpn_mode mode; + bool mode_set; + + int socket; + int cli_socket; + + __u32 keepalive_interval; + __u32 keepalive_timeout; + + enum ovpn_key_direction key_dir; + enum ovpn_key_slot key_slot; + int key_id; +}; + +static int ovpn_nl_recvmsgs(struct nl_ctx *ctx) +{ + int ret; + + ret = nl_recvmsgs(ctx->nl_sock, ctx->nl_cb); + + switch (ret) { + case -NLE_INTR: + fprintf(stderr, + "netlink received interrupt due to signal - ignoring\n"); + break; + case -NLE_NOMEM: + fprintf(stderr, "netlink out of memory error\n"); + break; + case -NLE_AGAIN: + fprintf(stderr, + "netlink reports blocking read - aborting wait\n"); + break; + default: + if (ret) + fprintf(stderr, "netlink reports error (%d): %s\n", + ret, nl_geterror(-ret)); + break; + } + + return ret; +} + +static struct nl_ctx *nl_ctx_alloc_flags(struct ovpn_ctx *ovpn, int cmd, + int flags) +{ + struct nl_ctx *ctx; + int err, ret; + + ctx = calloc(1, sizeof(*ctx)); + if (!ctx) + return NULL; + + ctx->nl_sock = nl_socket_alloc(); + if (!ctx->nl_sock) { + fprintf(stderr, "cannot allocate netlink socket\n"); + goto err_free; + } + + nl_socket_set_buffer_size(ctx->nl_sock, 8192, 8192); + + ret = genl_connect(ctx->nl_sock); + if (ret) { + fprintf(stderr, "cannot connect to generic netlink: %s\n", + nl_geterror(ret)); + goto err_sock; + } + + /* enable Extended ACK for detailed error reporting */ + err = 1; + setsockopt(nl_socket_get_fd(ctx->nl_sock), SOL_NETLINK, NETLINK_EXT_ACK, + &err, sizeof(err)); + + ctx->ovpn_dco_id = genl_ctrl_resolve(ctx->nl_sock, OVPN_FAMILY_NAME); + if (ctx->ovpn_dco_id < 0) { + fprintf(stderr, "cannot find ovpn_dco netlink component: %d\n", + ctx->ovpn_dco_id); + goto err_free; + } + + ctx->nl_msg = nlmsg_alloc(); + if (!ctx->nl_msg) { + fprintf(stderr, "cannot allocate netlink message\n"); + goto err_sock; + } + + ctx->nl_cb = nl_cb_alloc(NL_CB_DEFAULT); + if (!ctx->nl_cb) { + fprintf(stderr, "failed to allocate netlink callback\n"); + goto err_msg; + } + + nl_socket_set_cb(ctx->nl_sock, ctx->nl_cb); + + genlmsg_put(ctx->nl_msg, 0, 0, ctx->ovpn_dco_id, 0, flags, cmd, 0); + + if (ovpn->ifindex > 0) + NLA_PUT_U32(ctx->nl_msg, OVPN_A_IFINDEX, ovpn->ifindex); + + return ctx; +nla_put_failure: +err_msg: + nlmsg_free(ctx->nl_msg); +err_sock: + nl_socket_free(ctx->nl_sock); +err_free: + free(ctx); + return NULL; +} + +static struct nl_ctx *nl_ctx_alloc(struct ovpn_ctx *ovpn, int cmd) +{ + return nl_ctx_alloc_flags(ovpn, cmd, 0); +} + +static void nl_ctx_free(struct nl_ctx *ctx) +{ + if (!ctx) + return; + + nl_socket_free(ctx->nl_sock); + nlmsg_free(ctx->nl_msg); + nl_cb_put(ctx->nl_cb); + free(ctx); +} + +static int ovpn_nl_cb_error(struct sockaddr_nl (*nla)__attribute__((unused)), + struct nlmsgerr *err, void *arg) +{ + struct nlmsghdr *nlh = (struct nlmsghdr *)err - 1; + struct nlattr *tb_msg[NLMSGERR_ATTR_MAX + 1]; + int len = nlh->nlmsg_len; + struct nlattr *attrs; + int *ret = arg; + int ack_len = sizeof(*nlh) + sizeof(int) + sizeof(*nlh); + + *ret = err->error; + + if (!(nlh->nlmsg_flags & NLM_F_ACK_TLVS)) + return NL_STOP; + + if (!(nlh->nlmsg_flags & NLM_F_CAPPED)) + ack_len += err->msg.nlmsg_len - sizeof(*nlh); + + if (len <= ack_len) + return NL_STOP; + + attrs = (void *)((unsigned char *)nlh + ack_len); + len -= ack_len; + + nla_parse(tb_msg, NLMSGERR_ATTR_MAX, attrs, len, NULL); + if (tb_msg[NLMSGERR_ATTR_MSG]) { + len = strnlen((char *)nla_data(tb_msg[NLMSGERR_ATTR_MSG]), + nla_len(tb_msg[NLMSGERR_ATTR_MSG])); + fprintf(stderr, "kernel error: %*s\n", len, + (char *)nla_data(tb_msg[NLMSGERR_ATTR_MSG])); + } + + if (tb_msg[NLMSGERR_ATTR_MISS_NEST]) { + fprintf(stderr, "missing required nesting type %u\n", + nla_get_u32(tb_msg[NLMSGERR_ATTR_MISS_NEST])); + } + + if (tb_msg[NLMSGERR_ATTR_MISS_TYPE]) { + fprintf(stderr, "missing required attribute type %u\n", + nla_get_u32(tb_msg[NLMSGERR_ATTR_MISS_TYPE])); + } + + return NL_STOP; +} + +static int ovpn_nl_cb_finish(struct nl_msg (*msg)__attribute__((unused)), + void *arg) +{ + int *status = arg; + + *status = 0; + return NL_SKIP; +} + +static int ovpn_nl_cb_ack(struct nl_msg (*msg)__attribute__((unused)), + void *arg) +{ + int *status = arg; + + *status = 0; + return NL_STOP; +} + +static int ovpn_nl_msg_send(struct nl_ctx *ctx, ovpn_nl_cb cb) +{ + int status = 1; + + nl_cb_err(ctx->nl_cb, NL_CB_CUSTOM, ovpn_nl_cb_error, &status); + nl_cb_set(ctx->nl_cb, NL_CB_FINISH, NL_CB_CUSTOM, ovpn_nl_cb_finish, + &status); + nl_cb_set(ctx->nl_cb, NL_CB_ACK, NL_CB_CUSTOM, ovpn_nl_cb_ack, &status); + + if (cb) + nl_cb_set(ctx->nl_cb, NL_CB_VALID, NL_CB_CUSTOM, cb, ctx); + + nl_send_auto_complete(ctx->nl_sock, ctx->nl_msg); + + while (status == 1) + ovpn_nl_recvmsgs(ctx); + + if (status < 0) + fprintf(stderr, "failed to send netlink message: %s (%d)\n", + strerror(-status), status); + + return status; +} + +static int ovpn_read_key(const char *file, struct ovpn_ctx *ctx) +{ + int idx_enc, idx_dec, ret = -1; + unsigned char *ckey = NULL; + __u8 *bkey = NULL; + size_t olen = 0; + long ckey_len; + FILE *fp; + + fp = fopen(file, "r"); + if (!fp) { + fprintf(stderr, "cannot open: %s\n", file); + return -1; + } + + /* get file size */ + fseek(fp, 0L, SEEK_END); + ckey_len = ftell(fp); + rewind(fp); + + /* if the file is longer, let's just read a portion */ + if (ckey_len > 256) + ckey_len = 256; + + ckey = malloc(ckey_len); + if (!ckey) + goto err; + + ret = fread(ckey, 1, ckey_len, fp); + if (ret != ckey_len) { + fprintf(stderr, + "couldn't read enough data from key file: %dbytes read\n", + ret); + goto err; + } + + olen = 0; + ret = mbedtls_base64_decode(NULL, 0, &olen, ckey, ckey_len); + if (ret != MBEDTLS_ERR_BASE64_BUFFER_TOO_SMALL) { + char buf[256]; + + mbedtls_strerror(ret, buf, sizeof(buf)); + fprintf(stderr, "unexpected base64 error1: %s (%d)\n", buf, + ret); + + goto err; + } + + bkey = malloc(olen); + if (!bkey) { + fprintf(stderr, "cannot allocate binary key buffer\n"); + goto err; + } + + ret = mbedtls_base64_decode(bkey, olen, &olen, ckey, ckey_len); + if (ret) { + char buf[256]; + + mbedtls_strerror(ret, buf, sizeof(buf)); + fprintf(stderr, "unexpected base64 error2: %s (%d)\n", buf, + ret); + + goto err; + } + + if (olen < 2 * KEY_LEN + NONCE_LEN) { + fprintf(stderr, + "not enough data in key file, found %zdB but needs %dB\n", + olen, 2 * KEY_LEN + NONCE_LEN); + goto err; + } + + switch (ctx->key_dir) { + case KEY_DIR_IN: + idx_enc = 0; + idx_dec = 1; + break; + case KEY_DIR_OUT: + idx_enc = 1; + idx_dec = 0; + break; + } + + memcpy(ctx->key_enc, bkey + KEY_LEN * idx_enc, KEY_LEN); + memcpy(ctx->key_dec, bkey + KEY_LEN * idx_dec, KEY_LEN); + memcpy(ctx->nonce, bkey + 2 * KEY_LEN, NONCE_LEN); + + ret = 0; + +err: + fclose(fp); + free(bkey); + free(ckey); + + return ret; +} + +static int ovpn_read_cipher(const char *cipher, struct ovpn_ctx *ctx) +{ + if (strcmp(cipher, "aes") == 0) + ctx->cipher = OVPN_CIPHER_ALG_AES_GCM; + else if (strcmp(cipher, "chachapoly") == 0) + ctx->cipher = OVPN_CIPHER_ALG_CHACHA20_POLY1305; + else if (strcmp(cipher, "none") == 0) + ctx->cipher = OVPN_CIPHER_ALG_NONE; + else + return -ENOTSUP; + + return 0; +} + +static int ovpn_read_key_direction(const char *dir, struct ovpn_ctx *ctx) +{ + int in_dir; + + in_dir = strtoll(dir, NULL, 10); + switch (in_dir) { + case KEY_DIR_IN: + case KEY_DIR_OUT: + ctx->key_dir = in_dir; + break; + default: + fprintf(stderr, + "invalid key direction provided. Can be 0 or 1 only\n"); + return -1; + } + + return 0; +} + +static int ovpn_socket(struct ovpn_ctx *ctx, sa_family_t family, int proto) +{ + struct sockaddr_storage local_sock; + struct sockaddr_in6 *in6; + struct sockaddr_in *in; + int ret, s, sock_type; + size_t sock_len; + + if (proto == IPPROTO_UDP) + sock_type = SOCK_DGRAM; + else if (proto == IPPROTO_TCP) + sock_type = SOCK_STREAM; + else + return -EINVAL; + + s = socket(family, sock_type, 0); + if (s < 0) { + perror("cannot create socket"); + return -1; + } + + memset((char *)&local_sock, 0, sizeof(local_sock)); + + switch (family) { + case AF_INET: + in = (struct sockaddr_in *)&local_sock; + in->sin_family = family; + in->sin_port = htons(ctx->lport); + in->sin_addr.s_addr = htonl(INADDR_ANY); + sock_len = sizeof(*in); + break; + case AF_INET6: + in6 = (struct sockaddr_in6 *)&local_sock; + in6->sin6_family = family; + in6->sin6_port = htons(ctx->lport); + in6->sin6_addr = in6addr_any; + sock_len = sizeof(*in6); + break; + default: + return -1; + } + + int opt = 1; + + ret = setsockopt(s, SOL_SOCKET, SO_REUSEADDR, &opt, sizeof(opt)); + + if (ret < 0) { + perror("setsockopt for SO_REUSEADDR"); + return ret; + } + + ret = setsockopt(s, SOL_SOCKET, SO_REUSEPORT, &opt, sizeof(opt)); + if (ret < 0) { + perror("setsockopt for SO_REUSEPORT"); + return ret; + } + + if (family == AF_INET6) { + opt = 0; + if (setsockopt(s, IPPROTO_IPV6, IPV6_V6ONLY, &opt, + sizeof(opt))) { + perror("failed to set IPV6_V6ONLY"); + return -1; + } + } + + ret = bind(s, (struct sockaddr *)&local_sock, sock_len); + if (ret < 0) { + perror("cannot bind socket"); + goto err_socket; + } + + ctx->socket = s; + ctx->sa_family = family; + return 0; + +err_socket: + close(s); + return -1; +} + +static int ovpn_udp_socket(struct ovpn_ctx *ctx, sa_family_t family) +{ + return ovpn_socket(ctx, family, IPPROTO_UDP); +} + +static int ovpn_listen(struct ovpn_ctx *ctx, sa_family_t family) +{ + int ret; + + ret = ovpn_socket(ctx, family, IPPROTO_TCP); + if (ret < 0) + return ret; + + ret = listen(ctx->socket, 10); + if (ret < 0) { + perror("listen"); + close(ctx->socket); + return -1; + } + + return 0; +} + +static int ovpn_accept(struct ovpn_ctx *ctx) +{ + socklen_t socklen; + int ret; + + socklen = sizeof(ctx->remote); + ret = accept(ctx->socket, (struct sockaddr *)&ctx->remote, &socklen); + if (ret < 0) { + perror("accept"); + goto err; + } + + fprintf(stderr, "Connection received!\n"); + + switch (socklen) { + case sizeof(struct sockaddr_in): + case sizeof(struct sockaddr_in6): + break; + default: + fprintf(stderr, "error: expecting IPv4 or IPv6 connection\n"); + close(ret); + ret = -EINVAL; + goto err; + } + + return ret; +err: + close(ctx->socket); + return ret; +} + +static int ovpn_connect(struct ovpn_ctx *ovpn) +{ + socklen_t socklen; + int s, ret; + + s = socket(ovpn->remote.in4.sin_family, SOCK_STREAM, 0); + if (s < 0) { + perror("cannot create socket"); + return -1; + } + + switch (ovpn->remote.in4.sin_family) { + case AF_INET: + socklen = sizeof(struct sockaddr_in); + break; + case AF_INET6: + socklen = sizeof(struct sockaddr_in6); + break; + default: + return -EOPNOTSUPP; + } + + ret = connect(s, (struct sockaddr *)&ovpn->remote, socklen); + if (ret < 0) { + perror("connect"); + goto err; + } + + fprintf(stderr, "connected\n"); + + ovpn->socket = s; + + return 0; +err: + close(s); + return ret; +} + +static int ovpn_new_peer(struct ovpn_ctx *ovpn, bool is_tcp) +{ + struct nlattr *attr; + struct nl_ctx *ctx; + size_t alen; + int ret = -1; + + ctx = nl_ctx_alloc(ovpn, OVPN_CMD_SET_PEER); + if (!ctx) + return -ENOMEM; + + attr = nla_nest_start(ctx->nl_msg, OVPN_A_PEER); + NLA_PUT_U32(ctx->nl_msg, OVPN_A_PEER_ID, ovpn->peer_id); + NLA_PUT_U32(ctx->nl_msg, OVPN_A_PEER_SOCKET, ovpn->socket); + + if (!is_tcp) { + switch (ovpn->remote.in4.sin_family) { + case AF_INET: + alen = sizeof(struct sockaddr_in); + break; + case AF_INET6: + alen = sizeof(struct sockaddr_in6); + break; + default: + fprintf(stderr, + "Invalid family for remote socket address\n"); + goto nla_put_failure; + } + NLA_PUT(ctx->nl_msg, OVPN_A_PEER_SOCKADDR_REMOTE, alen, + &ovpn->remote); + } + + if (ovpn->peer_ip_set) { + switch (ovpn->peer_ip.in4.sin_family) { + case AF_INET: + NLA_PUT_U32(ctx->nl_msg, OVPN_A_PEER_VPN_IPV4, + ovpn->peer_ip.in4.sin_addr.s_addr); + break; + case AF_INET6: + NLA_PUT(ctx->nl_msg, OVPN_A_PEER_VPN_IPV6, + sizeof(struct in6_addr), + &ovpn->peer_ip.in6.sin6_addr); + break; + default: + fprintf(stderr, "Invalid family for peer address\n"); + goto nla_put_failure; + } + } + + nla_nest_end(ctx->nl_msg, attr); + + ret = ovpn_nl_msg_send(ctx, NULL); +nla_put_failure: + nl_ctx_free(ctx); + return ret; +} + +static int ovpn_set_peer(struct ovpn_ctx *ovpn) +{ + struct nlattr *attr; + struct nl_ctx *ctx; + int ret = -1; + + ctx = nl_ctx_alloc(ovpn, OVPN_CMD_SET_PEER); + if (!ctx) + return -ENOMEM; + + attr = nla_nest_start(ctx->nl_msg, OVPN_A_PEER); + NLA_PUT_U32(ctx->nl_msg, OVPN_A_PEER_ID, ovpn->peer_id); + NLA_PUT_U32(ctx->nl_msg, OVPN_A_PEER_KEEPALIVE_INTERVAL, + ovpn->keepalive_interval); + NLA_PUT_U32(ctx->nl_msg, OVPN_A_PEER_KEEPALIVE_TIMEOUT, + ovpn->keepalive_timeout); + nla_nest_end(ctx->nl_msg, attr); + + ret = ovpn_nl_msg_send(ctx, NULL); +nla_put_failure: + nl_ctx_free(ctx); + return ret; +} + +static int ovpn_del_peer(struct ovpn_ctx *ovpn) +{ + struct nlattr *attr; + struct nl_ctx *ctx; + int ret = -1; + + ctx = nl_ctx_alloc(ovpn, OVPN_CMD_DEL_PEER); + if (!ctx) + return -ENOMEM; + + attr = nla_nest_start(ctx->nl_msg, OVPN_A_PEER); + NLA_PUT_U32(ctx->nl_msg, OVPN_A_PEER_ID, ovpn->peer_id); + nla_nest_end(ctx->nl_msg, attr); + + ret = ovpn_nl_msg_send(ctx, NULL); +nla_put_failure: + nl_ctx_free(ctx); + return ret; +} + +static int ovpn_handle_peer(struct nl_msg *msg, void *arg) +{ + struct nlattr *attrs_peer[OVPN_A_PEER_MAX + 1]; + struct genlmsghdr *gnlh = nlmsg_data(nlmsg_hdr(msg)); + struct nlattr *attrs[OVPN_A_MAX + 1]; + __u16 port = 0; + + nla_parse(attrs, OVPN_A_MAX, genlmsg_attrdata(gnlh, 0), + genlmsg_attrlen(gnlh, 0), NULL); + + if (!attrs[OVPN_A_PEER]) { + fprintf(stderr, "no packet content in netlink message\n"); + return NL_SKIP; + } + + nla_parse(attrs_peer, OVPN_A_PEER_MAX, nla_data(attrs[OVPN_A_PEER]), + nla_len(attrs[OVPN_A_PEER]), NULL); + + if (attrs_peer[OVPN_A_PEER_ID]) + fprintf(stderr, "* Peer %u\n", + nla_get_u32(attrs_peer[OVPN_A_PEER_ID])); + + if (attrs_peer[OVPN_A_PEER_VPN_IPV4]) { + char buf[INET_ADDRSTRLEN]; + + inet_ntop(AF_INET, nla_data(attrs_peer[OVPN_A_PEER_VPN_IPV4]), + buf, sizeof(buf)); + fprintf(stderr, "\tVPN IPv4: %s\n", buf); + } + + if (attrs_peer[OVPN_A_PEER_VPN_IPV6]) { + char buf[INET6_ADDRSTRLEN]; + + inet_ntop(AF_INET6, nla_data(attrs_peer[OVPN_A_PEER_VPN_IPV6]), + buf, sizeof(buf)); + fprintf(stderr, "\tVPN IPv6: %s\n", buf); + } + + if (attrs_peer[OVPN_A_PEER_LOCAL_PORT]) + port = ntohs(nla_get_u16(attrs_peer[OVPN_A_PEER_LOCAL_PORT])); + + if (attrs_peer[OVPN_A_PEER_SOCKADDR_REMOTE]) { + struct sockaddr_storage ss; + struct sockaddr_in6 *in6 = (struct sockaddr_in6 *)&ss; + struct sockaddr_in *in = (struct sockaddr_in *)&ss; + + memcpy(&ss, nla_data(attrs_peer[OVPN_A_PEER_SOCKADDR_REMOTE]), + nla_len(attrs_peer[OVPN_A_PEER_SOCKADDR_REMOTE])); + + if (in->sin_family == AF_INET) { + char buf[INET_ADDRSTRLEN]; + + if (attrs_peer[OVPN_A_PEER_LOCAL_IP]) { + void *p = attrs_peer[OVPN_A_PEER_LOCAL_IP]; + + inet_ntop(AF_INET, nla_data(p), buf, + sizeof(buf)); + fprintf(stderr, "\tLocal: %s:%hu\n", buf, + port); + } + + inet_ntop(AF_INET, &in->sin_addr, buf, sizeof(buf)); + fprintf(stderr, "\tRemote: %s:%u\n", buf, + ntohs(in->sin_port)); + } else if (in->sin_family == AF_INET6) { + char buf[INET6_ADDRSTRLEN]; + + if (attrs_peer[OVPN_A_PEER_LOCAL_IP]) { + void *p = attrs_peer[OVPN_A_PEER_LOCAL_IP]; + + inet_ntop(AF_INET6, nla_data(p), buf, + sizeof(buf)); + fprintf(stderr, "\tLocal: %s\n", buf); + } + + inet_ntop(AF_INET6, &in6->sin6_addr, buf, sizeof(buf)); + fprintf(stderr, "\tRemote: %s:%u (scope-id: %u)\n", buf, + ntohs(in6->sin6_port), + ntohl(in6->sin6_scope_id)); + } + } + + if (attrs_peer[OVPN_A_PEER_KEEPALIVE_INTERVAL]) { + void *p = attrs_peer[OVPN_A_PEER_KEEPALIVE_INTERVAL]; + + fprintf(stderr, "\tKeepalive interval: %u sec\n", + nla_get_u32(p)); + } + + if (attrs_peer[OVPN_A_PEER_KEEPALIVE_TIMEOUT]) + fprintf(stderr, "\tKeepalive timeout: %u sec\n", + nla_get_u32(attrs_peer[OVPN_A_PEER_KEEPALIVE_TIMEOUT])); + + if (attrs_peer[OVPN_A_PEER_VPN_RX_BYTES]) + fprintf(stderr, "\tVPN RX bytes: %" PRIu64 "\n", + nla_get_uint(attrs_peer[OVPN_A_PEER_VPN_RX_BYTES])); + + if (attrs_peer[OVPN_A_PEER_VPN_TX_BYTES]) + fprintf(stderr, "\tVPN TX bytes: %" PRIu64 "\n", + nla_get_uint(attrs_peer[OVPN_A_PEER_VPN_TX_BYTES])); + + if (attrs_peer[OVPN_A_PEER_VPN_RX_PACKETS]) + fprintf(stderr, "\tVPN RX packets: %" PRIu64 "\n", + nla_get_uint(attrs_peer[OVPN_A_PEER_VPN_RX_PACKETS])); + + if (attrs_peer[OVPN_A_PEER_VPN_TX_PACKETS]) + fprintf(stderr, "\tVPN TX packets: %" PRIu64 "\n", + nla_get_uint(attrs_peer[OVPN_A_PEER_VPN_TX_PACKETS])); + + if (attrs_peer[OVPN_A_PEER_LINK_RX_BYTES]) + fprintf(stderr, "\tLINK RX bytes: %" PRIu64 "\n", + nla_get_uint(attrs_peer[OVPN_A_PEER_LINK_RX_BYTES])); + + if (attrs_peer[OVPN_A_PEER_LINK_TX_BYTES]) + fprintf(stderr, "\tLINK TX bytes: %" PRIu64 "\n", + nla_get_uint(attrs_peer[OVPN_A_PEER_LINK_TX_BYTES])); + + if (attrs_peer[OVPN_A_PEER_LINK_RX_PACKETS]) + fprintf(stderr, "\tLINK RX packets: %" PRIu64 "\n", + nla_get_uint(attrs_peer[OVPN_A_PEER_LINK_RX_PACKETS])); + + if (attrs_peer[OVPN_A_PEER_LINK_TX_PACKETS]) + fprintf(stderr, "\tLINK TX packets: %" PRIu64 "\n", + nla_get_uint(attrs_peer[OVPN_A_PEER_LINK_TX_PACKETS])); + + return NL_SKIP; +} + +static int ovpn_get_peer(struct ovpn_ctx *ovpn) +{ + int flags = 0, ret = -1; + struct nlattr *attr; + struct nl_ctx *ctx; + + if (ovpn->peer_id == PEER_ID_UNDEF) + flags = NLM_F_DUMP; + + ctx = nl_ctx_alloc_flags(ovpn, OVPN_CMD_GET_PEER, flags); + if (!ctx) + return -ENOMEM; + + if (ovpn->peer_id != PEER_ID_UNDEF) { + attr = nla_nest_start(ctx->nl_msg, OVPN_A_PEER); + NLA_PUT_U32(ctx->nl_msg, OVPN_A_PEER_ID, ovpn->peer_id); + nla_nest_end(ctx->nl_msg, attr); + } + + ret = ovpn_nl_msg_send(ctx, ovpn_handle_peer); +nla_put_failure: + nl_ctx_free(ctx); + return ret; +} + +static int ovpn_new_key(struct ovpn_ctx *ovpn) +{ + struct nlattr *peer, *keyconf, *key_dir; + struct nl_ctx *ctx; + int ret = -1; + + ctx = nl_ctx_alloc(ovpn, OVPN_CMD_SET_KEY); + if (!ctx) + return -ENOMEM; + + peer = nla_nest_start(ctx->nl_msg, OVPN_A_PEER); + NLA_PUT_U32(ctx->nl_msg, OVPN_A_PEER_ID, ovpn->peer_id); + + keyconf = nla_nest_start(ctx->nl_msg, OVPN_A_PEER_KEYCONF); + NLA_PUT_U32(ctx->nl_msg, OVPN_A_KEYCONF_SLOT, ovpn->key_slot); + NLA_PUT_U32(ctx->nl_msg, OVPN_A_KEYCONF_KEY_ID, ovpn->key_id); + NLA_PUT_U32(ctx->nl_msg, OVPN_A_KEYCONF_CIPHER_ALG, ovpn->cipher); + + key_dir = nla_nest_start(ctx->nl_msg, OVPN_A_KEYCONF_ENCRYPT_DIR); + NLA_PUT(ctx->nl_msg, OVPN_A_KEYDIR_CIPHER_KEY, KEY_LEN, ovpn->key_enc); + NLA_PUT(ctx->nl_msg, OVPN_A_KEYDIR_NONCE_TAIL, NONCE_LEN, ovpn->nonce); + nla_nest_end(ctx->nl_msg, key_dir); + + key_dir = nla_nest_start(ctx->nl_msg, OVPN_A_KEYCONF_DECRYPT_DIR); + NLA_PUT(ctx->nl_msg, OVPN_A_KEYDIR_CIPHER_KEY, KEY_LEN, ovpn->key_dec); + NLA_PUT(ctx->nl_msg, OVPN_A_KEYDIR_NONCE_TAIL, NONCE_LEN, ovpn->nonce); + nla_nest_end(ctx->nl_msg, key_dir); + + nla_nest_end(ctx->nl_msg, keyconf); + + nla_nest_end(ctx->nl_msg, peer); + + ret = ovpn_nl_msg_send(ctx, NULL); +nla_put_failure: + nl_ctx_free(ctx); + return ret; +} + +static int ovpn_del_key(struct ovpn_ctx *ovpn) +{ + struct nlattr *peer, *keyconf; + struct nl_ctx *ctx; + int ret = -1; + + ctx = nl_ctx_alloc(ovpn, OVPN_CMD_DEL_KEY); + if (!ctx) + return -ENOMEM; + + peer = nla_nest_start(ctx->nl_msg, OVPN_A_PEER); + NLA_PUT_U32(ctx->nl_msg, OVPN_A_PEER_ID, ovpn->peer_id); + + keyconf = nla_nest_start(ctx->nl_msg, OVPN_A_PEER_KEYCONF); + NLA_PUT_U32(ctx->nl_msg, OVPN_A_KEYCONF_SLOT, OVPN_KEY_SLOT_PRIMARY); + nla_nest_end(ctx->nl_msg, keyconf); + + nla_nest_end(ctx->nl_msg, peer); + + ret = ovpn_nl_msg_send(ctx, NULL); +nla_put_failure: + nl_ctx_free(ctx); + return ret; +} + +static int ovpn_swap_keys(struct ovpn_ctx *ovpn) +{ + struct nlattr *peer; + struct nl_ctx *ctx; + int ret = -1; + + ctx = nl_ctx_alloc(ovpn, OVPN_CMD_SWAP_KEYS); + if (!ctx) + return -ENOMEM; + + peer = nla_nest_start(ctx->nl_msg, OVPN_A_PEER); + NLA_PUT_U32(ctx->nl_msg, OVPN_A_PEER_ID, ovpn->peer_id); + nla_nest_end(ctx->nl_msg, peer); + + ret = ovpn_nl_msg_send(ctx, NULL); +nla_put_failure: + nl_ctx_free(ctx); + return ret; +} + +static int ovpn_handle_iface(struct nl_msg *msg, void *arg) +{ + struct genlmsghdr *gnlh = nlmsg_data(nlmsg_hdr(msg)); + struct nlattr *attrs[OVPN_A_MAX + 1]; + + nla_parse(attrs, OVPN_A_MAX, genlmsg_attrdata(gnlh, 0), + genlmsg_attrlen(gnlh, 0), NULL); + + if (!attrs[OVPN_A_IFNAME]) { + fprintf(stderr, "no ifname in netlink message\n"); + return NL_SKIP; + } + + fprintf(stderr, "Created ifname: %s\n", + (char *)nla_data(attrs[OVPN_A_IFNAME])); + + return NL_SKIP; +} + +static int ovpn_new_iface(struct ovpn_ctx *ovpn) +{ + struct nl_ctx *ctx; + int ret = -1; + + ctx = nl_ctx_alloc(ovpn, OVPN_CMD_NEW_IFACE); + if (!ctx) + return -ENOMEM; + + NLA_PUT(ctx->nl_msg, OVPN_A_IFNAME, strlen(ovpn->ifname) + 1, + ovpn->ifname); + + if (ovpn->mode_set) + NLA_PUT_U32(ctx->nl_msg, OVPN_A_MODE, ovpn->mode); + + fprintf(stdout, "Creating interface %s with mode %u\n", ovpn->ifname, + ovpn->mode); + + ret = ovpn_nl_msg_send(ctx, ovpn_handle_iface); +nla_put_failure: + nl_ctx_free(ctx); + return ret; +} + +static int ovpn_del_iface(struct ovpn_ctx *ovpn) +{ + struct nl_ctx *ctx; + int ret = -1; + + ctx = nl_ctx_alloc(ovpn, OVPN_CMD_DEL_IFACE); + if (!ctx) + return -ENOMEM; + + ret = ovpn_nl_msg_send(ctx, NULL); + nl_ctx_free(ctx); + return ret; +} + +static int nl_seq_check(struct nl_msg *msg, void *arg) +{ + return NL_OK; +} + +struct mcast_handler_args { + const char *group; + int id; +}; + +static int mcast_family_handler(struct nl_msg *msg, void *arg) +{ + struct mcast_handler_args *grp = arg; + struct nlattr *tb[CTRL_ATTR_MAX + 1]; + struct genlmsghdr *gnlh = nlmsg_data(nlmsg_hdr(msg)); + struct nlattr *mcgrp; + int rem_mcgrp; + + nla_parse(tb, CTRL_ATTR_MAX, genlmsg_attrdata(gnlh, 0), + genlmsg_attrlen(gnlh, 0), NULL); + + if (!tb[CTRL_ATTR_MCAST_GROUPS]) + return NL_SKIP; + + nla_for_each_nested(mcgrp, tb[CTRL_ATTR_MCAST_GROUPS], rem_mcgrp) { + struct nlattr *tb_mcgrp[CTRL_ATTR_MCAST_GRP_MAX + 1]; + + nla_parse(tb_mcgrp, CTRL_ATTR_MCAST_GRP_MAX, + nla_data(mcgrp), nla_len(mcgrp), NULL); + + if (!tb_mcgrp[CTRL_ATTR_MCAST_GRP_NAME] || + !tb_mcgrp[CTRL_ATTR_MCAST_GRP_ID]) + continue; + if (strncmp(nla_data(tb_mcgrp[CTRL_ATTR_MCAST_GRP_NAME]), + grp->group, nla_len(tb_mcgrp[CTRL_ATTR_MCAST_GRP_NAME]))) + continue; + grp->id = nla_get_u32(tb_mcgrp[CTRL_ATTR_MCAST_GRP_ID]); + break; + } + + return NL_SKIP; +} + +static int mcast_error_handler(struct sockaddr_nl *nla, struct nlmsgerr *err, + void *arg) +{ + int *ret = arg; + + *ret = err->error; + return NL_STOP; +} + +static int mcast_ack_handler(struct nl_msg *msg, void *arg) +{ + int *ret = arg; + + *ret = 0; + return NL_STOP; +} + +static int ovpn_handle_msg(struct nl_msg *msg, void *arg) +{ + struct genlmsghdr *gnlh = nlmsg_data(nlmsg_hdr(msg)); + struct nlattr *attrs[OVPN_A_MAX + 1]; + struct nlmsghdr *nlh = nlmsg_hdr(msg); + //enum ovpn_del_peer_reason reason; + char ifname[IF_NAMESIZE]; + __u32 ifindex; + + fprintf(stderr, "received message from ovpn-dco\n"); + + if (!genlmsg_valid_hdr(nlh, 0)) { + fprintf(stderr, "invalid header\n"); + return NL_STOP; + } + + if (nla_parse(attrs, OVPN_A_MAX, genlmsg_attrdata(gnlh, 0), + genlmsg_attrlen(gnlh, 0), NULL)) { + fprintf(stderr, "received bogus data from ovpn-dco\n"); + return NL_STOP; + } + + if (!attrs[OVPN_A_IFINDEX]) { + fprintf(stderr, "no ifindex in this message\n"); + return NL_STOP; + } + + ifindex = nla_get_u32(attrs[OVPN_A_IFINDEX]); + if (!if_indextoname(ifindex, ifname)) { + fprintf(stderr, "cannot resolve ifname for ifindex: %u\n", + ifindex); + return NL_STOP; + } + + switch (gnlh->cmd) { + case OVPN_CMD_DEL_PEER: + /*if (!attrs[OVPN_A_DEL_PEER_REASON]) { + * fprintf(stderr, "no reason in DEL_PEER message\n"); + * return NL_STOP; + *} + * + *reason = nla_get_u8(attrs[OVPN_A_DEL_PEER_REASON]); + *fprintf(stderr, + * "received CMD_DEL_PEER, ifname: %s reason: %d\n", + * ifname, reason); + */ + fprintf(stdout, "received CMD_DEL_PEER\n"); + break; + default: + fprintf(stderr, "received unknown command: %d\n", gnlh->cmd); + return NL_STOP; + } + + return NL_OK; +} + +static int ovpn_get_mcast_id(struct nl_sock *sock, const char *family, + const char *group) +{ + struct nl_msg *msg; + struct nl_cb *cb; + int ret, ctrlid; + struct mcast_handler_args grp = { + .group = group, + .id = -ENOENT, + }; + + msg = nlmsg_alloc(); + if (!msg) + return -ENOMEM; + + cb = nl_cb_alloc(NL_CB_DEFAULT); + if (!cb) { + ret = -ENOMEM; + goto out_fail_cb; + } + + ctrlid = genl_ctrl_resolve(sock, "nlctrl"); + + genlmsg_put(msg, 0, 0, ctrlid, 0, 0, CTRL_CMD_GETFAMILY, 0); + + ret = -ENOBUFS; + NLA_PUT_STRING(msg, CTRL_ATTR_FAMILY_NAME, family); + + ret = nl_send_auto_complete(sock, msg); + if (ret < 0) + goto nla_put_failure; + + ret = 1; + + nl_cb_err(cb, NL_CB_CUSTOM, mcast_error_handler, &ret); + nl_cb_set(cb, NL_CB_ACK, NL_CB_CUSTOM, mcast_ack_handler, &ret); + nl_cb_set(cb, NL_CB_VALID, NL_CB_CUSTOM, mcast_family_handler, &grp); + + while (ret > 0) + nl_recvmsgs(sock, cb); + + if (ret == 0) + ret = grp.id; + nla_put_failure: + nl_cb_put(cb); + out_fail_cb: + nlmsg_free(msg); + return ret; +} + +static void ovpn_listen_mcast(void) +{ + struct nl_sock *sock; + struct nl_cb *cb; + int mcid, ret; + + sock = nl_socket_alloc(); + if (!sock) { + fprintf(stderr, "cannot allocate netlink socket\n"); + goto err_free; + } + + nl_socket_set_buffer_size(sock, 8192, 8192); + + ret = genl_connect(sock); + if (ret < 0) { + fprintf(stderr, "cannot connect to generic netlink: %s\n", + nl_geterror(ret)); + goto err_free; + } + + mcid = ovpn_get_mcast_id(sock, OVPN_FAMILY_NAME, OVPN_MCGRP_PEERS); + if (mcid < 0) { + fprintf(stderr, "cannot get mcast group: %s\n", + nl_geterror(mcid)); + goto err_free; + } + + ret = nl_socket_add_membership(sock, mcid); + if (ret) { + fprintf(stderr, "failed to join mcast group: %d\n", ret); + goto err_free; + } + + ret = 0; + cb = nl_cb_alloc(NL_CB_DEFAULT); + nl_cb_set(cb, NL_CB_SEQ_CHECK, NL_CB_CUSTOM, nl_seq_check, NULL); + nl_cb_set(cb, NL_CB_VALID, NL_CB_CUSTOM, ovpn_handle_msg, &ret); + nl_cb_err(cb, NL_CB_CUSTOM, ovpn_nl_cb_error, &ret); + + while (ret != -EINTR) + ret = nl_recvmsgs(sock, cb); + + nl_cb_put(cb); +err_free: + nl_socket_free(sock); +} + +static void usage(const char *cmd) +{ + fprintf(stderr, "Error: invalid arguments.\n\n"); + fprintf(stderr, + "Usage %s <iface> <connect|listen|new_peer|new_multi_peer|set_peer|del_peer|new_key|del_key|recv|send|listen_mcast> [arguments..]\n", + cmd); + fprintf(stderr, "\tiface: tun interface name\n\n"); + + fprintf(stderr, + "* connect <peer_id> <raddr> <rport> <key file>: start connecting peer of TCP-based VPN session\n"); + fprintf(stderr, "\tpeer-id: peer ID of the connecting peer\n"); + fprintf(stderr, "\tremote-addr: peer IP address\n"); + fprintf(stderr, "\tremote-port: peer TCP port\n"); + + fprintf(stderr, + "* listen <lport> <peers_file>: listen for incoming peer TCP connections\n"); + fprintf(stderr, "\tlport: src TCP port\n"); + fprintf(stderr, + "\tpeers_file: file containing one peer per line: Line format:\n"); + fprintf(stderr, "\t\t<peer_id> <vpnaddr>\n\n"); + + fprintf(stderr, + "* new_peer <lport> <peer-id> <raddr> <rport> [vpnaddr]: add new peer\n"); + fprintf(stderr, + "\tpeer-id: peer ID to be used in data packets to/from this peer\n"); + fprintf(stderr, "\tlocal-port: local UDP port\n"); + fprintf(stderr, "\tremote-addr: peer IP address\n"); + fprintf(stderr, "\tremote-port: peer UDP port\n"); + fprintf(stderr, "\tvpnaddr: peer VPN IP\n\n"); + + fprintf(stderr, + "* new_multi_peer <lport> <file>: add multiple peers as listed in the file\n"); + fprintf(stderr, "\tlport: local UDP port to bind to\n"); + fprintf(stderr, + "\tfile: text file containing one peer per line. Line format:\n"); + fprintf(stderr, "\t\t<peer-id> <raddr> <rport> <vpnaddr>\n\n"); + + fprintf(stderr, + "* set_peer <peer-id> <keepalive_interval> <keepalive_timeout>: set peer attributes\n"); + fprintf(stderr, "\tpeer-id: peer ID of the peer to modify\n"); + fprintf(stderr, + "\tkeepalive_interval: interval for sending ping messages\n"); + fprintf(stderr, + "\tkeepalive_timeout: time after which a peer is timed out\n\n"); + + fprintf(stderr, "* del_peer <peer-id>: delete peer\n"); + fprintf(stderr, "\tpeer-id: peer ID of the peer to delete\n\n"); + + fprintf(stderr, + "* new_key <peer-id> <slot> <key_id> <cipher> <key_dir> <key_file>: set data channel key\n"); + fprintf(stderr, + "\tpeer-id: peer ID of the peer to configure the key for\n"); + fprintf(stderr, + "\tcipher: cipher to use, supported: aes (AES-GCM), chachapoly (CHACHA20POLY1305), none\n"); + fprintf(stderr, + "\tkey_dir: key direction, must 0 on one host and 1 on the other\n"); + fprintf(stderr, "\tkey_file: file containing the pre-shared key\n\n"); + + fprintf(stderr, + "* del_key <peer-id>: erase existing data channel key\n"); + fprintf(stderr, "\tpeer-id: peer ID of the peer to modify\n\n"); + + fprintf(stderr, + "* swap_keys <peer-id>: swap primary and seconday key slots\n"); + fprintf(stderr, "\tpeer-id: peer ID of the peer to modify\n\n"); + + fprintf(stderr, + "* listen_mcast: listen to ovpn-dco netlink multicast messages\n"); +} + +static int ovpn_parse_remote(struct ovpn_ctx *ovpn, const char *host, + const char *service, const char *vpnip) +{ + int ret; + struct addrinfo *result; + struct addrinfo hints = { + .ai_family = ovpn->sa_family, + .ai_socktype = SOCK_DGRAM, + .ai_protocol = IPPROTO_UDP + }; + + if (host) { + ret = getaddrinfo(host, service, &hints, &result); + if (ret == EAI_NONAME || ret == EAI_FAIL) + return -1; + + if (!(result->ai_family == AF_INET && + result->ai_addrlen == sizeof(struct sockaddr_in)) && + !(result->ai_family == AF_INET6 && + result->ai_addrlen == sizeof(struct sockaddr_in6))) { + ret = -EINVAL; + goto out; + } + + memcpy(&ovpn->remote, result->ai_addr, result->ai_addrlen); + } + + if (vpnip) { + ret = getaddrinfo(vpnip, NULL, &hints, &result); + if (ret == EAI_NONAME || ret == EAI_FAIL) + return -1; + + if (!(result->ai_family == AF_INET && + result->ai_addrlen == sizeof(struct sockaddr_in)) && + !(result->ai_family == AF_INET6 && + result->ai_addrlen == sizeof(struct sockaddr_in6))) { + ret = -EINVAL; + goto out; + } + + memcpy(&ovpn->peer_ip, result->ai_addr, result->ai_addrlen); + ovpn->sa_family = result->ai_family; + + ovpn->peer_ip_set = true; + } + + ret = 0; +out: + freeaddrinfo(result); + return ret; +} + +static int ovpn_parse_new_peer(struct ovpn_ctx *ovpn, const char *peer_id, + const char *raddr, const char *rport, + const char *vpnip) +{ + ovpn->peer_id = strtoul(peer_id, NULL, 10); + if (errno == ERANGE) { + fprintf(stderr, "peer ID value out of range\n"); + return -1; + } + + return ovpn_parse_remote(ovpn, raddr, rport, vpnip); +} + +static void ovpn_send_tcp_data(int socket) +{ + uint16_t len = htons(1000); + uint8_t buf[1002]; + int ret; + + memcpy(buf, &len, sizeof(len)); + memset(buf + sizeof(len), 0x86, sizeof(buf) - sizeof(len)); + + ret = send(socket, buf, sizeof(buf), 0); + + fprintf(stdout, "Sent %u bytes over TCP socket\n", ret); +} + +static void ovpn_recv_tcp_data(int socket) +{ + uint8_t buf[1002]; + uint16_t len; + int ret; + + ret = recv(socket, buf, sizeof(buf), 0); + + if (ret < 2) { + fprintf(stderr, ">>>> Error while reading TCP data: %d\n", ret); + return; + } + + memcpy(&len, buf, sizeof(len)); + len = ntohs(len); + + fprintf(stdout, ">>>> Received %u bytes over TCP socket, header: %u\n", + ret, len); + +/* int i; + * for (i = 2; i < ret; i++) { + * fprintf(stdout, "0x%.2x ", buf[i]); + * if (i && !((i - 2) % 16)) + * fprintf(stdout, "\n"); + * } + * fprintf(stdout, "\n"); + */ +} + +static int ovpn_parse_set_peer(struct ovpn_ctx *ovpn, int argc, char *argv[]) +{ + if (argc < 5) { + usage(argv[0]); + return -1; + } + + ovpn->keepalive_interval = strtoul(argv[3], NULL, 10); + if (errno == ERANGE) { + fprintf(stderr, "keepalive interval value out of range\n"); + return -1; + } + + ovpn->keepalive_timeout = strtoul(argv[4], NULL, 10); + if (errno == ERANGE) { + fprintf(stderr, "keepalive interval value out of range\n"); + return -1; + } + + return 0; +} + +int main(int argc, char *argv[]) +{ + struct ovpn_ctx ovpn; +// struct nl_ctx *ctx; + int ret; + + if (argc < 2) { + usage(argv[0]); + return -1; + } + + memset(&ovpn, 0, sizeof(ovpn)); + ovpn.sa_family = AF_INET; + ovpn.cli_socket = -1; + + if (argc > 2) { + strscpy(ovpn.ifname, argv[2], IFNAMSIZ - 1); + ovpn.ifname[IFNAMSIZ - 1] = '\0'; + } + + /* all commands except new_iface expect a valid ifindex */ + if (strcmp(argv[1], "new_iface")) { + /* in this case a ifname MUST be defined */ + if (argc < 3) { + usage(argv[0]); + return -1; + } + + ovpn.ifindex = if_nametoindex(ovpn.ifname); + if (!ovpn.ifindex) { + fprintf(stderr, "cannot find interface: %s\n", + strerror(errno)); + return -1; + } + } + + if (!strcmp(argv[1], "new_iface")) { + if (argc > 3) { + if (!strcmp(argv[3], "P2P")) { + ovpn.mode = OVPN_MODE_P2P; + } else if (!strcmp(argv[3], "MP")) { + ovpn.mode = OVPN_MODE_MP; + } else { + fprintf(stderr, "Cannot parse iface mode: %s\n", + argv[3]); + return -1; + } + ovpn.mode_set = true; + } + + ret = ovpn_new_iface(&ovpn); + if (ret < 0) { + fprintf(stderr, "Cannot create interface %s: %d\n", + ovpn.ifname, ret); + return -1; + } + } else if (!strcmp(argv[1], "del_iface")) { + ret = ovpn_del_iface(&ovpn); + if (ret < 0) { + fprintf(stderr, "Cannot delete interface %s: %d\n", + ovpn.ifname, ret); + return -1; + } + } else if (!strcmp(argv[1], "listen")) { + char peer_id[10], vpnip[100]; + int n; + FILE *fp; + + if (argc < 4) { + usage(argv[0]); + return -1; + } + + ovpn.lport = strtoul(argv[3], NULL, 10); + if (errno == ERANGE || ovpn.lport > 65535) { + fprintf(stderr, "lport value out of range\n"); + return -1; + } + + if (argc > 4 && !strcmp(argv[4], "ipv6")) + ovpn.sa_family = AF_INET6; + + ret = ovpn_listen(&ovpn, ovpn.sa_family); + if (ret < 0) { + fprintf(stderr, "cannot listen on TCP socket\n"); + return ret; + } + + fp = fopen(argv[4], "r"); + if (!fp) { + fprintf(stderr, "cannot open file: %s\n", argv[4]); + return -1; + } + + while ((n = fscanf(fp, "%s %s\n", peer_id, vpnip)) == 2) { + struct ovpn_ctx peer_ctx = { 0 }; + + peer_ctx.ifindex = ovpn.ifindex; + peer_ctx.sa_family = ovpn.sa_family; + + peer_ctx.socket = ovpn_accept(&ovpn); + if (peer_ctx.socket < 0) { + fprintf(stderr, "cannot accept connection!\n"); + return -1; + } + + /* store the socket of the first peer to test TCP I/O */ + if (ovpn.cli_socket < 0) + ovpn.cli_socket = peer_ctx.socket; + + ret = ovpn_parse_new_peer(&peer_ctx, peer_id, NULL, + NULL, vpnip); + if (ret < 0) { + fprintf(stderr, "error while parsing line\n"); + return -1; + } + + ret = ovpn_new_peer(&peer_ctx, true); + if (ret < 0) { + fprintf(stderr, + "cannot add peer to VPN: %s %s\n", + peer_id, vpnip); + return ret; + } + } + + if (ovpn.cli_socket >= 0) + ovpn_recv_tcp_data(ovpn.cli_socket); + } else if (!strcmp(argv[1], "connect")) { + if (argc < 5) { + usage(argv[0]); + return -1; + } + + ovpn.sa_family = AF_INET; + + ret = ovpn_parse_new_peer(&ovpn, argv[3], argv[4], argv[5], + NULL); + if (ret < 0) { + fprintf(stderr, "Cannot parse remote peer data\n"); + return ret; + } + + ret = ovpn_connect(&ovpn); + if (ret < 0) { + fprintf(stderr, "cannot connect TCP socket\n"); + return ret; + } + + ret = ovpn_new_peer(&ovpn, true); + if (ret < 0) { + fprintf(stderr, "cannot add peer to VPN\n"); + close(ovpn.socket); + return ret; + } + + if (argc > 6) { + ovpn.key_slot = OVPN_KEY_SLOT_PRIMARY; + ovpn.key_id = 0; + ovpn.cipher = OVPN_CIPHER_ALG_AES_GCM; + ovpn.key_dir = KEY_DIR_OUT; + + ret = ovpn_read_key(argv[6], &ovpn); + if (ret) + return ret; + + ret = ovpn_new_key(&ovpn); + if (ret < 0) { + fprintf(stderr, "cannot set key\n"); + return ret; + } + + ovpn_send_tcp_data(ovpn.socket); + } + } else if (!strcmp(argv[1], "new_peer")) { + if (argc < 7) { + usage(argv[0]); + return -1; + } + + ovpn.lport = strtoul(argv[3], NULL, 10); + if (errno == ERANGE || ovpn.lport > 65535) { + fprintf(stderr, "lport value out of range\n"); + return -1; + } + + const char *vpnip = (argc > 7) ? argv[7] : NULL; + + ret = ovpn_parse_new_peer(&ovpn, argv[4], argv[5], argv[6], + vpnip); + if (ret < 0) + return ret; + + ret = ovpn_udp_socket(&ovpn, AF_INET6); //ovpn.sa_family ? + if (ret < 0) + return ret; + + ret = ovpn_new_peer(&ovpn, false); + if (ret < 0) { + fprintf(stderr, "cannot add peer to VPN\n"); + return ret; + } + } else if (!strcmp(argv[1], "new_multi_peer")) { + char peer_id[10], raddr[128], rport[10], vpnip[100]; + FILE *fp; + int n; + + if (argc < 5) { + usage(argv[0]); + return -1; + } + + ovpn.lport = strtoul(argv[3], NULL, 10); + if (errno == ERANGE || ovpn.lport > 65535) { + fprintf(stderr, "lport value out of range\n"); + return -1; + } + + fp = fopen(argv[4], "r"); + if (!fp) { + fprintf(stderr, "cannot open file: %s\n", argv[4]); + return -1; + } + + ret = ovpn_udp_socket(&ovpn, AF_INET6); + if (ret < 0) + return ret; + + while ((n = fscanf(fp, "%s %s %s %s\n", peer_id, raddr, rport, + vpnip)) == 4) { + struct ovpn_ctx peer_ctx = { 0 }; + + peer_ctx.ifindex = ovpn.ifindex; + peer_ctx.socket = ovpn.socket; + peer_ctx.sa_family = AF_UNSPEC; + + ret = ovpn_parse_new_peer(&peer_ctx, peer_id, raddr, + rport, vpnip); + if (ret < 0) { + fprintf(stderr, "error while parsing line\n"); + return -1; + } + + ret = ovpn_new_peer(&peer_ctx, false); + if (ret < 0) { + fprintf(stderr, + "cannot add peer to VPN: %s %s %s %s\n", + peer_id, raddr, rport, vpnip); + return ret; + } + } + } else if (!strcmp(argv[1], "set_peer")) { + ovpn.peer_id = strtoul(argv[3], NULL, 10); + if (errno == ERANGE) { + fprintf(stderr, "peer ID value out of range\n"); + return -1; + } + + argv++; + argc--; + + ret = ovpn_parse_set_peer(&ovpn, argc, argv); + if (ret < 0) + return ret; + + ret = ovpn_set_peer(&ovpn); + if (ret < 0) { + fprintf(stderr, "cannot set peer to VPN\n"); + return ret; + } + } else if (!strcmp(argv[1], "del_peer")) { + if (argc < 4) { + usage(argv[0]); + return -1; + } + + ovpn.peer_id = strtoul(argv[3], NULL, 10); + if (errno == ERANGE) { + fprintf(stderr, "peer ID value out of range\n"); + return -1; + } + + ret = ovpn_del_peer(&ovpn); + if (ret < 0) { + fprintf(stderr, "cannot delete peer to VPN\n"); + return ret; + } + } else if (!strcmp(argv[1], "get_peer")) { + ovpn.peer_id = PEER_ID_UNDEF; + if (argc > 3) + ovpn.peer_id = strtoul(argv[3], NULL, 10); + + fprintf(stderr, "List of peers connected to: %s\n", + ovpn.ifname); + + ret = ovpn_get_peer(&ovpn); + if (ret < 0) { + fprintf(stderr, "cannot get peer(s): %d\n", ret); + return ret; + } + } else if (!strcmp(argv[1], "new_key")) { + if (argc < 8) { + usage(argv[0]); + return -1; + } + + ovpn.peer_id = strtoul(argv[3], NULL, 10); + if (errno == ERANGE) { + fprintf(stderr, "peer ID value out of range\n"); + return -1; + } + + int slot = strtoul(argv[4], NULL, 10); + + if (errno == ERANGE || slot < 1 || slot > 2) { + fprintf(stderr, "ket slot out of range\n"); + return -1; + } + + switch (slot) { + case 1: + ovpn.key_slot = OVPN_KEY_SLOT_PRIMARY; + break; + case 2: + ovpn.key_slot = OVPN_KEY_SLOT_SECONDARY; + break; + } + + ovpn.key_id = strtoul(argv[5], NULL, 10); + if (errno == ERANGE || ovpn.key_id > 2) { + fprintf(stderr, "ket ID out of range\n"); + return -1; + } + + ret = ovpn_read_cipher(argv[6], &ovpn); + if (ret < 0) + return ret; + + ret = ovpn_read_key_direction(argv[7], &ovpn); + if (ret < 0) + return ret; + + ret = ovpn_read_key(argv[8], &ovpn); + if (ret) + return ret; + + ret = ovpn_new_key(&ovpn); + if (ret < 0) { + fprintf(stderr, "cannot set key\n"); + return ret; + } + } else if (!strcmp(argv[1], "del_key")) { + if (argc < 3) { + usage(argv[0]); + return -1; + } + + ovpn.peer_id = strtoul(argv[3], NULL, 10); + if (errno == ERANGE) { + fprintf(stderr, "peer ID value out of range\n"); + return -1; + } + + argv++; + argc--; + + ret = ovpn_del_key(&ovpn); + if (ret < 0) { + fprintf(stderr, "cannot delete key\n"); + return ret; + } + } else if (!strcmp(argv[1], "swap_keys")) { + if (argc < 3) { + usage(argv[0]); + return -1; + } + + ovpn.peer_id = strtoul(argv[3], NULL, 10); + if (errno == ERANGE) { + fprintf(stderr, "peer ID value out of range\n"); + return -1; + } + + argv++; + argc--; + + ret = ovpn_swap_keys(&ovpn); + if (ret < 0) { + fprintf(stderr, "cannot swap keys\n"); + return ret; + } + } else if (!strcmp(argv[1], "listen_mcast")) { + ovpn_listen_mcast(); + } else { + usage(argv[0]); + return -1; + } + + return ret; +} diff --git a/tools/testing/selftests/net/ovpn/tcp_peers.txt b/tools/testing/selftests/net/ovpn/tcp_peers.txt new file mode 100644 index 000000000000..3b7f68bb7f64 --- /dev/null +++ b/tools/testing/selftests/net/ovpn/tcp_peers.txt @@ -0,0 +1 @@ +1 5.5.5.2 diff --git a/tools/testing/selftests/net/ovpn/udp_peers.txt b/tools/testing/selftests/net/ovpn/udp_peers.txt new file mode 100644 index 000000000000..32f14bd9347a --- /dev/null +++ b/tools/testing/selftests/net/ovpn/udp_peers.txt @@ -0,0 +1,5 @@ +1 10.10.1.2 1 5.5.5.2 +2 10.10.2.2 1 5.5.5.3 +3 10.10.3.2 1 5.5.5.4 +4 10.10.4.2 1 5.5.5.5 +5 10.10.5.2 1 5.5.5.6 -- 2.44.2

8 months, 2 weeks

1
0
0 0

[PATCH v5 0/2] Add test to distinguish between thread's signal mask and ucontext_t

by Dev Jain

This patch series is motivated by the following observation: Raise a signal, jump to signal handler. The ucontext_t structure dumped by kernel to userspace has a uc_sigmask field having the mask of blocked signals. If you run a fresh minimalistic program doing this, this field is empty, even if you block some signals while registering the handler with sigaction(). Here is what the man-pages have to say: sigaction(2): "sa_mask specifies a mask of signals which should be blocked (i.e., added to the signal mask of the thread in which the signal handler is invoked) during execution of the signal handler. In addition, the signal which triggered the handler will be blocked, unless the SA_NODEFER flag is used." signal(7): Under "Execution of signal handlers", (1.3) implies: "The thread's current signal mask is accessible via the ucontext_t object that is pointed to by the third argument of the signal handler." But, (1.4) states: "Any signals specified in act->sa_mask when registering the handler with sigprocmask(2) are added to the thread's signal mask. The signal being delivered is also added to the signal mask, unless SA_NODEFER was specified when registering the handler. These signals are thus blocked while the handler executes." There clearly is no distinction being made in the man pages between "Thread's signal mask" and ucontext_t; this logically should imply that a signal blocked by populating struct sigaction should be visible in ucontext_t. Here is what the kernel code does (for Aarch64): do_signal() -> handle_signal() -> sigmask_to_save(), which returns &current->blocked, is passed to setup_rt_frame() -> setup_sigframe() -> __copy_to_user(). Hence, &current->blocked is copied to ucontext_t exposed to userspace. Returning back to handle_signal(), signal_setup_done() -> signal_delivered() -> sigorsets() and set_current_blocked() are responsible for using information from struct ksignal ksig, which was populated through the sigaction() system call in kernel/signal.c: copy_from_user(&new_sa.sa, act, sizeof(new_sa.sa)), to update &current->blocked; hence, the set of blocked signals for the current thread is updated AFTER the kernel dumps ucontext_t to userspace. Assuming that the above is indeed the intended behaviour, because it semantically makes sense, since the signals blocked using sigaction() remain blocked only till the execution of the handler, and not in the context present before jumping to the handler (but nothing can be confirmed from the man-pages), the series introduces a test for mangling with uc_sigmask. I will send a separate series to fix the man-pages. The proposed selftest has been tested out on Aarch32, Aarch64 and x86_64. v4->v5: - Remove a redundant print statement v3->v4: - Allocate sigsets as automatic variables to avoid malloc() v2->v3: - ucontext describes current state -> ucontext describes interrupted context - Add a comment for blockage of USR2 even after return from handler - Describe blockage of signals in a better way v1->v2: - Replace all occurrences of SIGPIPE with SIGSEGV - Fixed a mismatch between code comment and ksft log - Add a testcase: Raise the same signal again; it must not be queued - Remove unneeded <assert.h>, <unistd.h> - Give a detailed test description in the comments; also describe the exact meaning of delivered and blocked - Handle errors for all libc functions/syscalls - Mention tests in Makefile and .gitignore in alphabetical order v1: - https://lore.kernel.org/all/20240607122319.768640-1-dev.jain@arm.com/ Dev Jain (2): selftests: Rename sigaltstack to generic signal selftests: Add a test mangling with uc_sigmask tools/testing/selftests/Makefile | 2 +- .../{sigaltstack => signal}/.gitignore | 3 +- .../{sigaltstack => signal}/Makefile | 3 +- .../current_stack_pointer.h | 0 .../selftests/signal/mangle_uc_sigmask.c | 184 ++++++++++++++++++ .../sas.c => signal/sigaltstack.c} | 0 6 files changed, 189 insertions(+), 3 deletions(-) rename tools/testing/selftests/{sigaltstack => signal}/.gitignore (57%) rename tools/testing/selftests/{sigaltstack => signal}/Makefile (53%) rename tools/testing/selftests/{sigaltstack => signal}/current_stack_pointer.h (100%) create mode 100644 tools/testing/selftests/signal/mangle_uc_sigmask.c rename tools/testing/selftests/{sigaltstack/sas.c => signal/sigaltstack.c} (100%) -- 2.30.2

8 months, 2 weeks

2
6
0 0

[PATCH 0/4] kunit: Add macros to help write more complex tests

by Michal Wajdeczko

It was suggested to promote some of the ideas introduced by [1] to be a part of the core KUnit instead of keeping them locally. [1] https://patchwork.freedesktop.org/series/137095/ Cc: Rae Moar <rmoar(a)google.com> Cc: David Gow <davidgow(a)google.com> Cc: Lucas De Marchi <lucas.demarchi(a)intel.com> Michal Wajdeczko (4): kunit: Introduce kunit_is_running() kunit: Add macro to conditionally expose declarations to tests kunit: Allow function redirection outside of the KUnit thread kunit: Add example with alternate function redirection method include/kunit/static_stub.h | 80 ++++++++++++++++++++++++++++++++++ include/kunit/test-bug.h | 12 ++++- include/kunit/visibility.h | 8 ++++ lib/kunit/kunit-example-test.c | 63 ++++++++++++++++++++++++++ lib/kunit/static_stub.c | 21 +++++++++ 5 files changed, 182 insertions(+), 2 deletions(-) -- 2.43.0

8 months, 2 weeks

4
19
0 0

[PATCH bpf-next v2 0/8] libbpf, selftests/bpf: Support cross-endian usage

by Tony Ambardar

From: Tony Ambardar <tony.ambardar(a)gmail.com> Hello all, This patch series targets a long-standing BPF usability issue - the lack of general cross-compilation support - by enabling cross-endian usage of libbpf and bpftool, as well as supporting cross-endian build targets for selftests/bpf. Benefits include improved BPF development and testing for embedded systems based on e.g. big-endian MIPS, more build options e.g for s390x systems, and better accessibility to the very latest test tools e.g. 'test_progs'. Initial development and testing used mips64, since this arch makes switching the build byte-order trivial and is thus very handy for A/B testing. However, it lacks some key features (bpf2bpf call, kfuncs, etc) making for poor selftests/bpf coverage. Final testing takes the kernel and selftests/bpf cross-built from x86_64 to s390x, and runs the result under QEMU/s390x. That same configuration could also be used on kernel-patches/bpf CI for regression testing endian support or perhaps load-sharing s390x builds across x86_64 systems. This thread includes some background regarding testing on QEMU/s390x and the generally favourable results: https://lore.kernel.org/bpf/ZsEcsaa3juxxQBUf@kodidev-ubuntu/ Feedback and suggestions are welcome! Best regards, Tony Changelog: --------- v1 -> v2: - fixed a light skeleton bug causing test_progs 'map_ptr' failure - simplified some BTF.ext related endianness logic - remove an 'inline' usage related to CI checkpatch failure - improve some formatting noted by checkpatch warnings - unexpected 'test_progs' failures drop 3 -> 2 (x86_64 to s390x cross) Tony Ambardar (8): libbpf: Improve log message formatting libbpf: Fix header comment typos for BTF.ext libbpf: Fix output .symtab byte-order during linking libbpf: Support BTF.ext loading and output in either endianness libbpf: Support opening bpf objects of either endianness libbpf: Support linking bpf objects of either endianness libbpf: Support creating light skeleton of either endianness selftests/bpf: Support cross-endian building tools/lib/bpf/bpf_gen_internal.h | 1 + tools/lib/bpf/btf.c | 168 ++++++++++++++++++++++-- tools/lib/bpf/btf.h | 3 + tools/lib/bpf/btf_dump.c | 2 +- tools/lib/bpf/btf_relocate.c | 2 +- tools/lib/bpf/gen_loader.c | 187 ++++++++++++++++++++------- tools/lib/bpf/libbpf.c | 26 +++- tools/lib/bpf/libbpf.map | 2 + tools/lib/bpf/libbpf_internal.h | 17 ++- tools/lib/bpf/linker.c | 108 +++++++++++++--- tools/lib/bpf/relo_core.c | 2 +- tools/lib/bpf/skel_internal.h | 3 +- tools/testing/selftests/bpf/Makefile | 7 +- 13 files changed, 444 insertions(+), 84 deletions(-) -- 2.34.1

8 months, 2 weeks

2
22
0 0

[PATCH net 00/15] mptcp: more fixes for the in-kernel PM

by Matthieu Baerts (NGI0)

Here is a new batch of fixes for the MPTCP in-kernel path-manager: Patch 1 ensures the address ID is set to 0 when the path-manager sends an ADD_ADDR for the address of the initial subflow. The same fix is applied when a new subflow is created re-using this special address. A fix for v6.0. Patch 2 is similar, but for the case where an endpoint is removed: if this endpoint was used for the initial address, it is important to send a RM_ADDR with this ID set to 0, and look for existing subflows with the ID set to 0. A fix for v6.0 as well. Patch 3 validates the two previous patches. Patch 4 makes the PM selecting an "active" path to send an address notification in an ACK, instead of taking the first path in the list. A fix for v5.11. Patch 5 fixes skipping the establishment of a new subflow if a previous subflow using the same pair of addresses is being closed. A fix for v5.13. Patch 6 resets the ID linked to the initial subflow when the linked endpoint is re-added, possibly with a different ID. A fix for v6.0. Patch 7 validates the three previous patches. Patch 8 is a small fix for the MPTCP Join selftest, when being used with older subflows not supporting all MIB counters. A fix for a commit introduced in v6.4, but backported up to v5.10. Patch 9 avoids the PM to try to close the initial subflow multiple times, and increment counters while nothing happened. A fix for v5.10. Patch 10 stops incrementing local_addr_used and add_addr_accepted counters when dealing with the address ID 0, because these counters are not taking into account the initial subflow, and are then not decremented when the linked addresses are removed. A fix for v6.0. Patch 11 validates the previous patch. Patch 12 avoids the PM to send multiple SUB_CLOSED events for the initial subflow. A fix for v5.12. Patch 13 validates the previous patch. Patch 14 stops treating the ADD_ADDR 0 as a new address, and accepts it in order to re-create the initial subflow if it has been closed, even if the limit for *new* addresses -- not taking into account the address of the initial subflow -- has been reached. A fix for v5.10. Patch 15 validates the previous patch. Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> --- Matthieu Baerts (NGI0) (15): mptcp: pm: reuse ID 0 after delete and re-add mptcp: pm: fix RM_ADDR ID for the initial subflow selftests: mptcp: join: check removing ID 0 endpoint mptcp: pm: send ACK on an active subflow mptcp: pm: skip connecting to already established sf mptcp: pm: reset MPC endp ID when re-added selftests: mptcp: join: check re-adding init endp with != id selftests: mptcp: join: no extra msg if no counter mptcp: pm: do not remove already closed subflows mptcp: pm: fix ID 0 endp usage after multiple re-creations selftests: mptcp: join: check re-re-adding ID 0 endp mptcp: avoid duplicated SUB_CLOSED events selftests: mptcp: join: validate event numbers mptcp: pm: ADD_ADDR 0 is not a new address selftests: mptcp: join: check re-re-adding ID 0 signal net/mptcp/pm.c | 4 +- net/mptcp/pm_netlink.c | 87 ++++++++++---- net/mptcp/protocol.c | 6 + net/mptcp/protocol.h | 5 +- tools/testing/selftests/net/mptcp/mptcp_join.sh | 149 ++++++++++++++++++++---- tools/testing/selftests/net/mptcp/mptcp_lib.sh | 4 + 6 files changed, 207 insertions(+), 48 deletions(-) --- base-commit: 8af174ea863c72f25ce31cee3baad8a301c0cf0f change-id: 20240826-net-mptcp-more-pm-fix-ffa61a36f817 Best regards, -- Matthieu Baerts (NGI0) <matttbe(a)kernel.org>

8 months, 2 weeks

3
17
0 0

[PATCH v2 0/9] SEV Kernel Selftests

by Pratik R. Sampat

This series primarily introduces SEV-SNP test for the kernel selftest framework. It tests boot, ioctl, pre fault, and fallocate in various combinations to exercise both positive and negative launch flow paths. Patch 1 - Adds a wrapper for the ioctl calls that decouple ioctl and asserts which enables the use of negative test cases. No functional change intended. Patch 2 - Extend the sev smoke tests to use the SNP specific ioctl calls and sets up memory to boot a SNP guest VM Patch 3 - Adds SNP to shutdown testing Patch 4, 5 - Tests the ioctl path for SEV, SEV-ES and SNP Patch 6 - Adds support for SNP in KVM_SEV_INIT2 tests Patch 7,8,9 - Enable Prefault tests for SEV, SEV-ES and SNP The patchset is rebased on top of kvm/queue and and over the "KVM: selftests: Add SEV-ES shutdown test" patch. https://lore.kernel.org/kvm/20240709182936.146487-1-pgonda@google.com/ v2: 1. Add SMT parsing check to populate SNP policy flags 2. Extend Peter Gonda's shutdown test to include SNP 3. Introduce new tests for prefault which include exercising prefault, fallocate, hole-punch in various combinations. 4. Decouple ioctl patch reworked to introduce private variants of the the functions that call into the ioctl. Also reordered the patch for it to arrive first so that new APIs are not written right after their introduction. 5. General cleanups - adding comments, avoiding local booleans, better error message. Suggestions incorporated from Peter, Tom, and Sean. RFC: https://lore.kernel.org/kvm/20240710220540.188239-1-pratikrajesh.sampat@amd… Michael Roth (2): KVM: selftests: Add interface to manually flag protected/encrypted ranges KVM: selftests: Add a CoCo-specific test for KVM_PRE_FAULT_MEMORY Pratik R. Sampat (7): KVM: selftests: Decouple SEV ioctls from asserts KVM: selftests: Add a basic SNP smoke test KVM: selftests: Add SNP to shutdown testing KVM: selftests: SEV IOCTL test KVM: selftests: SNP IOCTL test KVM: selftests: SEV-SNP test for KVM_SEV_INIT2 KVM: selftests: Interleave fallocate for KVM_PRE_FAULT_MEMORY tools/testing/selftests/kvm/Makefile | 1 + .../testing/selftests/kvm/include/kvm_util.h | 13 + .../selftests/kvm/include/x86_64/processor.h | 1 + .../selftests/kvm/include/x86_64/sev.h | 76 +++- tools/testing/selftests/kvm/lib/kvm_util.c | 53 ++- .../selftests/kvm/lib/x86_64/processor.c | 6 +- tools/testing/selftests/kvm/lib/x86_64/sev.c | 190 +++++++- .../kvm/x86_64/coco_pre_fault_memory_test.c | 421 ++++++++++++++++++ .../selftests/kvm/x86_64/sev_init2_tests.c | 13 + .../selftests/kvm/x86_64/sev_smoke_test.c | 298 ++++++++++++- 10 files changed, 1024 insertions(+), 48 deletions(-) create mode 100644 tools/testing/selftests/kvm/x86_64/coco_pre_fault_memory_test.c -- 2.34.1

8 months, 2 weeks

4
16
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror August 2024