This patch series provides arch-neutral enhancements to
enable memory-keys on new architecutes, and the corresponding
changes in x86 and powerpc specific code to support that.
a) Provides ability to support upto 32 keys. PowerPC
can handle 32 keys and hence needs this.
b) Arch-neutral code; and not the arch-specific code,
determines the format of the string, that displays the key
for each vma in smaps.
History:
-------
version v13:
(1) fixed a git bisect error. :(
version v12:
(1) fixed compilation errors seen with various x86
configs.
version v11:
(1) code that displays key in smaps is not any more
defined under CONFIG_ARCH_HAS_PKEYS.
- Comment by Eric W. Biederman and Michal Hocko
(2) merged two patches that implemented (1).
- comment by Michal Hocko
version prior to v11:
(1) used one additional bit from VM_HIGH_ARCH_*
to support 32 keys.
- Suggestion by Dave Hansen.
(2) powerpc specific changes to support memory keys.
Ram Pai (3):
mm, powerpc, x86: define VM_PKEY_BITx bits if CONFIG_ARCH_HAS_PKEYS
is enabled
mm, powerpc, x86: introduce an additional vma bit for powerpc pkey
mm, x86, powerpc: display pkey in smaps only if arch supports pkeys
arch/powerpc/include/asm/mmu_context.h | 5 -----
arch/powerpc/include/asm/pkeys.h | 2 ++
arch/x86/include/asm/mmu_context.h | 5 -----
arch/x86/include/asm/pkeys.h | 1 +
arch/x86/kernel/fpu/xstate.c | 5 +++++
arch/x86/kernel/setup.c | 8 --------
fs/proc/task_mmu.c | 15 ++++++++-------
include/linux/mm.h | 12 +++++++-----
include/linux/pkeys.h | 7 ++++++-
9 files changed, 29 insertions(+), 31 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Some tests cause the kernel to print things to the kernel log
buffer (ie. printk), in particular oops and warnings etc. However when
running all the tests in succession it's not always obvious which
test(s) caused the kernel to print something.
We can narrow it down by printing which test directory we're running
in to /dev/kmsg, if it's writable.
Example output:
[ 170.149149] kselftest: Running tests in powerpc
[ 305.300132] kworker/dying (71) used greatest stack depth: 7776 bytes left
[ 808.915456] kselftest: Running tests in pstore
Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au>
---
tools/testing/selftests/Makefile | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index 7442dfb73b7f..0fbe778efd5f 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -130,6 +130,7 @@ ifdef INSTALL_PATH
BUILD_TARGET=$$BUILD/$$TARGET; \
echo "echo ; echo Running tests in $$TARGET" >> $(ALL_SCRIPT); \
echo "echo ========================================" >> $(ALL_SCRIPT); \
+ echo "[ -w /dev/kmsg ] && echo \"kselftest: Running tests in $$TARGET\" >> /dev/kmsg" >> $(ALL_SCRIPT); \
echo "cd $$TARGET" >> $(ALL_SCRIPT); \
make -s --no-print-directory OUTPUT=$$BUILD_TARGET -C $$TARGET emit_tests >> $(ALL_SCRIPT); \
echo "cd \$$ROOT" >> $(ALL_SCRIPT); \
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
On 03/08/2018 05:24 PM, Li Zhijian wrote:
> 0Day robot tried to bisect the FBC, but it failed at last. But anyway
> i want to let you know we had this issue.
Can you please bisect this, manually if necessary? Let me know if you
need any help.
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Fails to build iomap_test.c due to missing include
gcc -I. -I../../../../../drivers/staging/android/uapi/ -Wall -O2 -g
ionmap_test.c ipcsocket.c ionutils.c -o ionmap_test
ionmap_test.c:12:27: fatal error: linux/dma-buf.h: No such file or
directory
#include <linux/dma-buf.h>
^
compilation terminated.
<builtin>: recipe for target 'ionmap_test' failed
make[2]: *** [ionmap_test] Error 1
In the current code, we add a new -I ../../../../../usr/include/ to the
INCLUDEDIR variable. Also add ionmap_test to the .gitignore file.
Fixes: ac93f7046a53 ("selftests: ion: Add simple test with the vgem driver")
Signed-off-by: Anders Roxell <anders.roxell(a)linaro.org>
---
tools/testing/selftests/android/ion/.gitignore | 1 +
tools/testing/selftests/android/ion/Makefile | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/android/ion/.gitignore b/tools/testing/selftests/android/ion/.gitignore
index 67e6f391b2a9..95e8f4561474 100644
--- a/tools/testing/selftests/android/ion/.gitignore
+++ b/tools/testing/selftests/android/ion/.gitignore
@@ -1,2 +1,3 @@
ionapp_export
ionapp_import
+ionmap_test
diff --git a/tools/testing/selftests/android/ion/Makefile b/tools/testing/selftests/android/ion/Makefile
index d23b6d537d8b..e03695287f76 100644
--- a/tools/testing/selftests/android/ion/Makefile
+++ b/tools/testing/selftests/android/ion/Makefile
@@ -1,5 +1,5 @@
-INCLUDEDIR := -I. -I../../../../../drivers/staging/android/uapi/
+INCLUDEDIR := -I. -I../../../../../drivers/staging/android/uapi/ -I../../../../../usr/include/
CFLAGS := $(CFLAGS) $(INCLUDEDIR) -Wall -O2 -g
TEST_GEN_FILES := ionapp_export ionapp_import ionmap_test
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Since seccomp_get_metadata() depends on CHECKPOINT_RESTORE, XFAIL the
test if the ptrace reports it as missing.
Signed-off-by: Kees Cook <keescook(a)chromium.org>
---
tools/testing/selftests/kselftest_harness.h | 26 +++++++++++++++++++++++++-
tools/testing/selftests/seccomp/seccomp_bpf.c | 15 +++++++++++++--
2 files changed, 38 insertions(+), 3 deletions(-)
diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h
index e81bd28bdd89..6ae3730c4ee3 100644
--- a/tools/testing/selftests/kselftest_harness.h
+++ b/tools/testing/selftests/kselftest_harness.h
@@ -107,6 +107,27 @@
__FILE__, __LINE__, _metadata->name, ##__VA_ARGS__)
/**
+ * XFAIL(statement, fmt, ...)
+ *
+ * @statement: statement to run after reporting XFAIL
+ * @fmt: format string
+ * @...: optional arguments
+ *
+ * This forces a "pass" after reporting a failure with an XFAIL prefix,
+ * and runs "statement", which is usually "return" or "goto skip".
+ */
+#define XFAIL(statement, fmt, ...) do { \
+ if (TH_LOG_ENABLED) { \
+ fprintf(TH_LOG_STREAM, "[ XFAIL! ] " fmt "\n", \
+ ##__VA_ARGS__); \
+ } \
+ /* TODO: find a way to pass xfail to test runner process. */ \
+ _metadata->passed = 1; \
+ _metadata->trigger = 0; \
+ statement; \
+} while (0)
+
+/**
* TEST(test_name) - Defines the test function and creates the registration
* stub
*
@@ -198,7 +219,7 @@
/**
* FIXTURE_SETUP(fixture_name) - Prepares the setup function for the fixture.
- * *_metadata* is included so that ASSERT_* work as a convenience
+ * *_metadata* is included so that EXPECT_* and ASSERT_* work correctly.
*
* @fixture_name: fixture name
*
@@ -221,6 +242,7 @@
FIXTURE_DATA(fixture_name) __attribute__((unused)) *self)
/**
* FIXTURE_TEARDOWN(fixture_name)
+ * *_metadata* is included so that EXPECT_* and ASSERT_* work correctly.
*
* @fixture_name: fixture name
*
@@ -253,6 +275,8 @@
* Defines a test that depends on a fixture (e.g., is part of a test case).
* Very similar to TEST() except that *self* is the setup instance of fixture's
* datatype exposed for use by the implementation.
+ *
+ * Warning: use of ASSERT_* here will skip TEARDOWN.
*/
/* TODO(wad) register fixtures on dedicated test lists. */
#define TEST_F(fixture_name, test_name) \
diff --git a/tools/testing/selftests/seccomp/seccomp_bpf.c b/tools/testing/selftests/seccomp/seccomp_bpf.c
index 92db48825dc1..d7e54031e26b 100644
--- a/tools/testing/selftests/seccomp/seccomp_bpf.c
+++ b/tools/testing/selftests/seccomp/seccomp_bpf.c
@@ -2860,6 +2860,7 @@ TEST(get_metadata)
int pipefd[2];
char buf;
struct seccomp_metadata md;
+ long ret;
ASSERT_EQ(0, pipe(pipefd));
@@ -2893,16 +2894,26 @@ TEST(get_metadata)
ASSERT_EQ(0, ptrace(PTRACE_ATTACH, pid));
ASSERT_EQ(pid, waitpid(pid, NULL, 0));
+ /* Past here must not use ASSERT or child process is never killed. */
+
md.filter_off = 0;
- ASSERT_EQ(sizeof(md), ptrace(PTRACE_SECCOMP_GET_METADATA, pid, sizeof(md), &md));
+ errno = 0;
+ ret = ptrace(PTRACE_SECCOMP_GET_METADATA, pid, sizeof(md), &md);
+ EXPECT_EQ(sizeof(md), ret) {
+ if (errno == EINVAL)
+ XFAIL(goto skip, "Kernel does not support PTRACE_SECCOMP_GET_METADATA (missing CONFIG_CHECKPOINT_RESTORE?)");
+ }
+
EXPECT_EQ(md.flags, SECCOMP_FILTER_FLAG_LOG);
EXPECT_EQ(md.filter_off, 0);
md.filter_off = 1;
- ASSERT_EQ(sizeof(md), ptrace(PTRACE_SECCOMP_GET_METADATA, pid, sizeof(md), &md));
+ ret = ptrace(PTRACE_SECCOMP_GET_METADATA, pid, sizeof(md), &md);
+ EXPECT_EQ(sizeof(md), ret);
EXPECT_EQ(md.flags, 0);
EXPECT_EQ(md.filter_off, 1);
+skip:
ASSERT_EQ(0, kill(pid, SIGKILL));
}
--
2.7.4
--
Kees Cook
Pixel Security
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Ingo,
Please consider pulling, this has those 31 patches that were
blocked due to some problems (author not being the fist S-o-B, build
broken on ppc), those issues should all be fixed and then we have 14
patches more, described in the signed tag.
Regards,
- Arnaldo
Test results at the end of this message, as usual.
The following changes since commit 10f354a36f9a9aa1b8bffe0abc1cd43822a85bcd:
perf test: Fix exit code for record+probe_libc_inet_pton.sh (2018-03-16 13:56:31 -0300)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo-4.17-20180319
for you to fetch changes up to 1cd618838b9703eabe4a75badf433382b12f6bef:
perf tests bp_account: Fix build with clang-6 (2018-03-19 13:51:54 -0300)
----------------------------------------------------------------
perf/core improvements and fixes:
- Fixes for problems experienced with new gcc 8 warnings, that treated
as errors, broke the build, related to snprintf and casting issues.
(Arnaldo Carvalho de Melo, Jiri Olsa, Josh Poinboeuf)
- Fix build of new breakpoint 'perf test' entry with clang < 6, noticed
on fedora 25, 26 and 27 (Arnaldo Carvalho de Melo)
- Workaround problem with symbol resolution in 'perf annotate', using
the symbol name already present in the objdump output (Arnaldo Carvalho de Melo)
- Document 'perf top --ignore-vmlinux' (Arnaldo Carvalho de Melo)
- Fix out of bounds access on array fd when cnt is 100 in one of the
'perf test' entries, detected using 'cpptest' (Colin Ian King)
- Add support for the forced leader feature, i.e. 'perf report --group'
for a group of events not really grouped when scheduled (without using
{} to enclose the list of events in the command line) in pipe mode,
e.g.:
$ perf record -e cycles,instructions -o - kill | perf report --group -i -
- Use right type to access array elements in 'perf probe' (Masami Hiramatsu)
- Update POWER9 vendor events (those described in JSON format) (Sukadev Bhattiprolu)
- Discard head in overwrite_rb_find_range() (Yisheng Xie)
- Avoid setting 'quiet' to 'true' unnecessarily (Yisheng Xie)
Signed-off-by: Arnaldo Carvalho de Melo <acme(a)redhat.com>
----------------------------------------------------------------
Arnaldo Carvalho de Melo (4):
perf annotate: Use asprintf when formatting objdump command line
perf top: Document --ignore-vmlinux
perf annotate: Use ops->target.name when available for unresolved call targets
perf tests bp_account: Fix build with clang-6
Colin Ian King (1):
perf tests: Fix out of bounds access on array fd when cnt is 100
Jiri Olsa (4):
perf record: Synthesize features before events in pipe mode
perf report: Support forced leader feature in pipe mode
perf tools: Fix snprint warnings for gcc 8
perf tools: Fix python extension build for gcc 8
Josh Poimboeuf (1):
objtool, perf: Fix GCC 8 -Wrestrict error
Masami Hiramatsu (1):
perf probe: Use right type to access array elements
Sukadev Bhattiprolu (1):
perf vendor events: Update POWER9 events
Yisheng Xie (2):
perf mmap: Discard head in overwrite_rb_find_range()
perf debug: Avoid setting 'quiet' to 'true' unnecessarily
tools/lib/str_error_r.c | 2 +-
tools/perf/Documentation/perf-top.txt | 3 +
tools/perf/builtin-record.c | 18 +-
tools/perf/builtin-report.c | 57 +++--
tools/perf/builtin-script.c | 22 +-
.../perf/pmu-events/arch/powerpc/power9/cache.json | 25 ---
.../pmu-events/arch/powerpc/power9/frontend.json | 10 -
.../pmu-events/arch/powerpc/power9/marked.json | 5 -
.../pmu-events/arch/powerpc/power9/memory.json | 5 -
.../perf/pmu-events/arch/powerpc/power9/other.json | 241 ++++++++++++++-------
.../pmu-events/arch/powerpc/power9/pipeline.json | 50 ++---
tools/perf/pmu-events/arch/powerpc/power9/pmc.json | 5 -
.../arch/powerpc/power9/translation.json | 10 +-
tools/perf/tests/attr.c | 4 +-
tools/perf/tests/bp_account.c | 10 +-
tools/perf/tests/mem.c | 2 +-
tools/perf/tests/pmu.c | 2 +-
tools/perf/util/annotate.c | 20 +-
tools/perf/util/cgroup.c | 2 +-
tools/perf/util/debug.c | 1 -
tools/perf/util/header.c | 11 +-
tools/perf/util/mmap.c | 15 +-
tools/perf/util/parse-events.c | 4 +-
tools/perf/util/pmu.c | 2 +-
tools/perf/util/probe-finder.c | 13 +-
tools/perf/util/setup.py | 2 +
26 files changed, 298 insertions(+), 243 deletions(-)
Test results:
The first ones are container (docker) based builds of tools/perf with and
without libelf support. Where clang is available, it is also used to build
perf with/without libelf.
The objtool and samples/bpf/ builds are disabled now that I'm switching from
using the sources in a local volume to fetching them from a http server to
build it inside the container, to make it easier to build in a container cluster.
Those will come back later.
Several are cross builds, the ones with -x-ARCH and the android one, and those
may not have all the features built, due to lack of multi-arch devel packages,
available and being used so far on just a few, like
debian:experimental-x-{arm64,mipsel}.
The 'perf test' one will perform a variety of tests exercising
tools/perf/util/, tools/lib/{bpf,traceevent,etc}, as well as run perf commands
with a variety of command line event specifications to then intercept the
sys_perf_event syscall to check that the perf_event_attr fields are set up as
expected, among a variety of other unit tests.
Then there is the 'make -C tools/perf build-test' ones, that build tools/perf/
with a variety of feature sets, exercising the build with an incomplete set of
features as well as with a complete one. It is planned to have it run on each
of the containers mentioned above, using some container orchestration
infrastructure. Get in contact if interested in helping having this in place.
[root@jouet ~]# time dm
1 alpine:3.4 : Ok gcc (Alpine 5.3.0) 5.3.0
2 alpine:3.5 : Ok gcc (Alpine 6.2.1) 6.2.1 20160822
3 alpine:3.6 : Ok gcc (Alpine 6.3.0) 6.3.0
4 alpine:3.7 : Ok gcc (Alpine 6.4.0) 6.4.0
5 alpine:edge : Ok gcc (Alpine 6.4.0) 6.4.0
6 amazonlinux:1 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-11)
7 amazonlinux:2 : Ok gcc (GCC) 7.2.1 20170915 (Red Hat 7.2.1-2)
8 android-ndk:r12b-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
9 android-ndk:r15c-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
10 centos:5 : Ok gcc (GCC) 4.1.2 20080704 (Red Hat 4.1.2-55)
11 centos:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-18)
12 centos:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-16)
13 debian:7 : Ok gcc (Debian 4.7.2-5) 4.7.2
14 debian:8 : Ok gcc (Debian 4.9.2-10+deb8u1) 4.9.2
15 debian:9 : Ok gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516
16 debian:experimental : Ok gcc (Debian 7.2.0-17) 7.2.1 20171205
17 debian:experimental-x-arm64 : Ok aarch64-linux-gnu-gcc (Debian 7.2.0-11) 7.2.0
18 debian:experimental-x-mips : Ok mips-linux-gnu-gcc (Debian 7.2.0-11) 7.2.0
19 debian:experimental-x-mips64 : Ok mips64-linux-gnuabi64-gcc (Debian 7.2.0-11) 7.2.0
20 debian:experimental-x-mipsel : Ok mipsel-linux-gnu-gcc (Debian 7.2.0-11) 7.2.0
21 fedora:20 : Ok gcc (GCC) 4.8.3 20140911 (Red Hat 4.8.3-7)
22 fedora:21 : Ok gcc (GCC) 4.9.2 20150212 (Red Hat 4.9.2-6)
23 fedora:22 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6)
24 fedora:23 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6)
25 fedora:24 : Ok gcc (GCC) 6.3.1 20161221 (Red Hat 6.3.1-1)
26 fedora:24-x-ARC-uClibc : Ok arc-linux-gcc (ARCompact ISA Linux uClibc toolchain 2017.09-rc2) 7.1.1 20170710
27 fedora:25 : Ok gcc (GCC) 6.4.1 20170727 (Red Hat 6.4.1-1)
28 fedora:26 : Ok gcc (GCC) 7.3.1 20180130 (Red Hat 7.3.1-2)
29 fedora:27 : Ok gcc (GCC) 7.3.1 20180303 (Red Hat 7.3.1-5)
30 fedora:rawhide : Ok gcc (GCC) 8.0.1 20180222 (Red Hat 8.0.1-0.16)
31 gentoo-stage3-amd64:latest : Ok gcc (Gentoo 6.4.0-r1 p1.3) 6.4.0
32 mageia:5 : Ok gcc (GCC) 4.9.2
33 mageia:6 : Ok gcc (Mageia 5.4.0-5.mga6) 5.4.0
34 opensuse:42.1 : Ok gcc (SUSE Linux) 4.8.5
35 opensuse:42.2 : Ok gcc (SUSE Linux) 4.8.5
36 opensuse:42.3 : Ok gcc (SUSE Linux) 4.8.5
37 opensuse:tumbleweed : Ok gcc (SUSE Linux) 7.3.0
38 oraclelinux:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-18)
39 oraclelinux:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-16.0.3)
40 ubuntu:12.04.5 : Ok gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3
41 ubuntu:14.04.4 : Ok gcc (Ubuntu 4.8.4-2ubuntu1~14.04.3) 4.8.4
42 ubuntu:14.04.4-x-linaro-arm64 : Ok aarch64-linux-gnu-gcc (Linaro GCC 5.4-2017.05) 5.4.1 20170404
43 ubuntu:15.04 : Ok gcc (Ubuntu 4.9.2-10ubuntu13) 4.9.2
44 ubuntu:16.04 : Ok gcc (Ubuntu 5.4.0-6ubuntu1~16.04.5) 5.4.0 20160609
45 ubuntu:16.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) 5.4.0 20160609
46 ubuntu:16.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) 5.4.0 20160609
47 ubuntu:16.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.4) 5.4.0 20160609
48 ubuntu:16.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.1) 5.4.0 20160609
49 ubuntu:16.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.4) 5.4.0 20160609
50 ubuntu:16.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.4) 5.4.0 20160609
51 ubuntu:16.10 : Ok gcc (Ubuntu 6.2.0-5ubuntu12) 6.2.0 20161005
52 ubuntu:17.04 : Ok gcc (Ubuntu 6.3.0-12ubuntu2) 6.3.0 20170406
53 ubuntu:17.10 : Ok gcc (Ubuntu 7.2.0-8ubuntu3) 7.2.0
54 ubuntu:18.04 : Ok gcc (Ubuntu 7.2.0-16ubuntu1) 7.2.0
# uname -a
Linux jouet 4.16.0-rc5-00086-gdf09348f78dc #1 SMP Fri Mar 16 09:46:40 -03 2018 x86_64 x86_64 x86_64 GNU/Linux
# perf test
1: vmlinux symtab matches kallsyms : Ok
2: Detect openat syscall event : Ok
3: Detect openat syscall event on all cpus : Ok
4: Read samples using the mmap interface : Ok
5: Test data source output : Ok
6: Parse event definition strings : Ok
7: Simple expression parser : Ok
8: PERF_RECORD_* events & perf_sample fields : Ok
9: Parse perf pmu format : Ok
10: DSO data read : Ok
11: DSO data cache : Ok
12: DSO data reopen : Ok
13: Roundtrip evsel->name : Ok
14: Parse sched tracepoints fields : Ok
15: syscalls:sys_enter_openat event fields : Ok
16: Setup struct perf_event_attr : Ok
17: Match and link multiple hists : Ok
18: 'import perf' in python : Ok
19: Breakpoint overflow signal handler : Ok
20: Breakpoint overflow sampling : Ok
21: Breakpoint accounting : Skip
22: Number of exit events of a simple workload : Ok
23: Software clock events period values : Ok
24: Object code reading : Ok
25: Sample parsing : Ok
26: Use a dummy software event to keep tracking : Ok
27: Parse with no sample_id_all bit set : Ok
28: Filter hist entries : Ok
29: Lookup mmap thread : Ok
30: Share thread mg : Ok
31: Sort output of hist entries : Ok
32: Cumulate child hist entries : Ok
33: Track with sched_switch : Ok
34: Filter fds with revents mask in a fdarray : Ok
35: Add fd to a fdarray, making it autogrow : Ok
36: kmod_path__parse : Ok
37: Thread map : Ok
38: LLVM search and compile :
38.1: Basic BPF llvm compile : Ok
38.2: kbuild searching : Ok
38.3: Compile source for BPF prologue generation : Ok
38.4: Compile source for BPF relocation : Ok
39: Session topology : Ok
40: BPF filter :
40.1: Basic BPF filtering : Ok
40.2: BPF pinning : Ok
40.3: BPF prologue generation : Ok
40.4: BPF relocation checker : Ok
41: Synthesize thread map : Ok
42: Remove thread map : Ok
43: Synthesize cpu map : Ok
44: Synthesize stat config : Ok
45: Synthesize stat : Ok
46: Synthesize stat round : Ok
47: Synthesize attr update : Ok
48: Event times : Ok
49: Read backward ring buffer : Ok
50: Print cpu map : Ok
51: Probe SDT events : Ok
52: is_printable_array : Ok
53: Print bitmap : Ok
54: perf hooks : Ok
55: builtin clang support : Skip (not compiled in)
56: unit_number__scnprintf : Ok
57: mem2node : Ok
58: x86 rdpmc : Ok
59: Convert perf time to TSC : Ok
60: DWARF unwind : Ok
61: x86 instruction decoder - new instructions : Ok
62: Use vfs_getname probe to get syscall args filenames : Ok
63: Check open filename arg using perf trace + vfs_getname: Ok
64: probe libc's inet_pton & backtrace it with ping : Ok
65: Add vfs_getname probe to get syscall args filenames : Ok
#
$ make -C tools/perf build-test
make: Entering directory '/home/acme/git/perf/tools/perf'
- tarpkg: ./tests/perf-targz-src-pkg .
make_no_libbionic_O: make NO_LIBBIONIC=1
make_no_libelf_O: make NO_LIBELF=1
make_with_clangllvm_O: make LIBCLANGLLVM=1
make_install_prefix_slash_O: make install prefix=/tmp/krava/
make_no_libbpf_O: make NO_LIBBPF=1
make_no_backtrace_O: make NO_BACKTRACE=1
make_minimal_O: make NO_LIBPERL=1 NO_LIBPYTHON=1 NO_NEWT=1 NO_GTK2=1 NO_DEMANGLE=1 NO_LIBELF=1 NO_LIBUNWIND=1 NO_BACKTRACE=1 NO_LIBNUMA=1 NO_LIBAUDIT=1 NO_LIBBIONIC=1 NO_LIBDW_DWARF_UNWIND=1 NO_AUXTRACE=1 NO_LIBBPF=1 NO_LIBCRYPTO=1 NO_SDT=1 NO_JVMTI=1
make_no_slang_O: make NO_SLANG=1
make_no_libnuma_O: make NO_LIBNUMA=1
make_clean_all_O: make clean all
make_util_map_o_O: make util/map.o
make_no_demangle_O: make NO_DEMANGLE=1
make_no_auxtrace_O: make NO_AUXTRACE=1
make_pure_O: make
make_install_bin_O: make install-bin
make_install_O: make install
make_no_libdw_dwarf_unwind_O: make NO_LIBDW_DWARF_UNWIND=1
make_tags_O: make tags
make_install_prefix_O: make install prefix=/tmp/krava
make_no_ui_O: make NO_NEWT=1 NO_SLANG=1 NO_GTK2=1
make_no_libperl_O: make NO_LIBPERL=1
make_no_gtk2_O: make NO_GTK2=1
make_static_O: make LDFLAGS=-static
make_help_O: make help
make_no_newt_O: make NO_NEWT=1
make_debug_O: make DEBUG=1
make_no_libunwind_O: make NO_LIBUNWIND=1
make_with_babeltrace_O: make LIBBABELTRACE=1
make_no_libaudit_O: make NO_LIBAUDIT=1
make_perf_o_O: make perf.o
make_no_scripts_O: make NO_LIBPYTHON=1 NO_LIBPERL=1
make_util_pmu_bison_o_O: make util/pmu-bison.o
make_no_libpython_O: make NO_LIBPYTHON=1
make_doc_O: make doc
OK
make: Leaving directory '/home/acme/git/perf/tools/perf'
$
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
glibc keeps getting cleverer, and my version now turns raise() into
more than one syscall. Since the test relies on ptrace seeing an
exact set of syscalls, this breaks the test. Replace raise(SIGSTOP)
with syscall(SYS_tgkill, ...) to force glibc to get out of our way.
Cc: stable(a)vger.kernel.org
Signed-off-by: Andy Lutomirski <luto(a)kernel.org>
---
tools/testing/selftests/x86/ptrace_syscall.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/x86/ptrace_syscall.c b/tools/testing/selftests/x86/ptrace_syscall.c
index 1ae1c5a7392e..6f22238f3217 100644
--- a/tools/testing/selftests/x86/ptrace_syscall.c
+++ b/tools/testing/selftests/x86/ptrace_syscall.c
@@ -183,8 +183,10 @@ static void test_ptrace_syscall_restart(void)
if (ptrace(PTRACE_TRACEME, 0, 0, 0) != 0)
err(1, "PTRACE_TRACEME");
+ pid_t pid = getpid(), tid = syscall(SYS_gettid);
+
printf("\tChild will make one syscall\n");
- raise(SIGSTOP);
+ syscall(SYS_tgkill, pid, tid, SIGSTOP);
syscall(SYS_gettid, 10, 11, 12, 13, 14, 15);
_exit(0);
@@ -301,9 +303,11 @@ static void test_restart_under_ptrace(void)
if (ptrace(PTRACE_TRACEME, 0, 0, 0) != 0)
err(1, "PTRACE_TRACEME");
+ pid_t pid = getpid(), tid = syscall(SYS_gettid);
+
printf("\tChild will take a nap until signaled\n");
setsigign(SIGUSR1, SA_RESTART);
- raise(SIGSTOP);
+ syscall(SYS_tgkill, pid, tid, SIGSTOP);
syscall(SYS_pause, 0, 0, 0, 0, 0, 0);
_exit(0);
--
2.14.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
From: Colin Ian King <colin.king(a)canonical.com>
Trivial fix to spelling mistake in error message text and re-adjust
break in literal string to fit into 80 char wide format.
Signed-off-by: Colin Ian King <colin.king(a)canonical.com>
---
tools/testing/selftests/filesystems/devpts_pts.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/filesystems/devpts_pts.c b/tools/testing/selftests/filesystems/devpts_pts.c
index b9055e974289..32addb696150 100644
--- a/tools/testing/selftests/filesystems/devpts_pts.c
+++ b/tools/testing/selftests/filesystems/devpts_pts.c
@@ -279,8 +279,8 @@ int main(int argc, char *argv[])
int ret;
if (!isatty(STDIN_FILENO)) {
- fprintf(stderr, "Standard input file desciptor is not attached "
- "to a terminal. Skipping test\n");
+ fprintf(stderr, "Standard input file descriptor is not "
+ "attached to a terminal. Skipping test\n");
exit(EXIT_FAILURE);
}
--
2.15.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello open list:KERNEL SELFTEST FRAMEWORK,
We have not received a payment for this invoice yet. I am happy to answer any questions.
> http://edsqualityflooring.com/Question/
Kind Regards,