- Linux-kselftest-mirror - lists.linaro.org

[PATCH net-next] selftests: tcp_ao: fix spelling in seq-ext.c comment

by Ankit Chauhan

Spelling fix: conneciton --> connection This is a non-functional change aimed at improving code clarity. Signed-off-by: Ankit Chauhan <ankitchauhan2065(a)gmail.com> --- tools/testing/selftests/net/tcp_ao/seq-ext.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/tcp_ao/seq-ext.c b/tools/testing/selftests/net/tcp_ao/seq-ext.c index f00245263b20..6478da6a71c3 100644 --- a/tools/testing/selftests/net/tcp_ao/seq-ext.c +++ b/tools/testing/selftests/net/tcp_ao/seq-ext.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /* Check that after SEQ number wrap-around: * 1. SEQ-extension has upper bytes set - * 2. TCP conneciton is alive and no TCPAOBad segments + * 2. TCP connection is alive and no TCPAOBad segments * In order to test (2), the test doesn't just adjust seq number for a queue * on a connected socket, but migrates it to another sk+port number, so * that there won't be any delayed packets that will fail to verify -- 2.34.1

3 months

2
1
0 0

[PATCH v17 RESEND net-next 0/5] DUALPI2 patch

by chia-yu.chang＠nokia-bell-labs.com

From: Chia-Yu Chang <chia-yu.chang(a)nokia-bell-labs.com> Hello, Please find the DualPI2 patch v17. This patch serise adds DualPI Improved with a Square (DualPI2) with following features: * Supports congestion controls that comply with the Prague requirements in RFC9331 (e.g. TCP-Prague) * Coupled dual-queue that separates the L4S traffic in a low latency queue (L-queue), without harming remaining traffic that is scheduled in classic queue (C-queue) due to congestion-coupling using PI2 as defined in RFC9332 * Configurable overload strategies * Use of sojourn time to reliably estimate queue delay * Supports ECN L4S-identifier (IP.ECN==0b*1) to classify traffic into respective queues For more details of DualPI2, please refer IETF RFC9332 (https://datatracker.ietf.org/doc/html/rfc9332). Best regards, Chia-Yu --- v17 (25-May-2025, Resent at 11-Jun-2025) - Replace 0xffffffff with U32_MAX (Paolo Abeni <pabeni(a)redhat.com>) - Use helper function qdisc_dequeue_internal() and add new helper function skb_apply_step() (Paolo Abeni <pabeni(a)redhat.com>) - Add s64 casting when calculating the delta of the PI controller (Paolo Abeni <pabeni(a)redhat.com>) - Change the drop reason into SKB_DROP_REASON_QDISC_CONGESTED for drop_early (Paolo Abeni <pabeni(a)redhat.com>) - Modify the condition to remove the original skb when enqueuing multiple GSO segments (Paolo Abeni <pabeni(a)redhat.com>) - Add READ_ONCE() in dualpi2_dump_stat() (Paolo Abeni <pabeni(a)redhat.com>) - Add comments, brackets, and brackets for readability (Paolo Abeni <pabeni(a)redhat.com>) v16 (16-MAy-2025) - Add qdisc_lock() to dualpi2_timer() in dualpi2_timer (Paolo Abeni <pabeni(a)redhat.com>) - Introduce convert_ns_to_usec() to convert usec to nsec without overflow in #1 (Paolo Abeni <pabeni(a)redhat.com>) - Update convert_us_tonsec() to convert nsec to usec without overflow in #2 (Paolo Abeni <pabeni(a)redhat.com>) - Add more descriptions with respect to DualPI2 in the cover ltter and add changelog in each patch (Paolo Abeni <pabeni(a)redhat.com>) v15 (09-May-2025) - Add enum of TCA_DUALPI2_ECN_MASK_CLA_ECT to remove potential leakeage in #1 (Simon Horman <horms(a)kernel.org>) - Fix one typo in comment of #2 - Update tc.yaml in #5 to aligh with the updated enum of pkt_sched.h v14 (05-May-2025) - Modify tc.yaml: (1) Replace flags with enum and remove enum-as-flags, (2) Remove credit-queue in xstats, and (3) Change attribute types (Donald Hunter <donald.hun - Add enum and fix the ordering of variables in pkt_sched.h to align with the modified tc.yaml (Donald Hunter <donald.hunter(a)gmail.com>) - Add validators for DROP_OVERLOAD, DROP_EARLY, ECN_MASK, and SPLIT_GSO in sch_dualpi2.c (Donald Hunter <donald.hunter(a)gmail.com>) - Update dualpi2.json to align with the updated variable order in pkt_sched.h - Reorder patches (Donald Hunter <donald.hunter(a)gmail.com>) v13 (26-Apr-2025) - Use dashes in member names to follow YNL conventions in tc.yaml (Donald Hunter <donald.hunter(a)gmail.com>) - Define enumerations separately for flags of drop-early, drop-overload, ecn-mask, credit-queue in tc.yaml (Donald Hunter <donald.hunter(a)gmail.com>) - Change the types of split-gso and step-packets into flag in tc.yaml (Donald Hunter <donald.hunter(a)gmail.com>) - Revert to u32/u8 types for tc-dualpi2-xstats members in tc.yaml (Donald Hunter <donald.hunter(a)gmail.com>) - Add new test cases in tc-tests/qdiscs/dualpi2.json to cover all dualpi2 parameters (Donald Hunter <donald.hunter(a)gmail.com>) - Change the type of TCA_DUALPI2_STEP_PACKETS into NLA_FLAG (Donald Hunter <donald.hunter(a)gmail.com>) v12 (22-Apr-2025) - Remove anonymous struct in sch_dualpi2.c (Paolo Abeni <pabeni(a)redhat.com>) - Replace u32/u8 with uint and s32 with int in tc spec document (Paolo Abeni <pabeni(a)redhat.com>) - Introduce get_memory_limit function to handle potential overflow when multipling limit with MTU (Paolo Abeni <pabeni(a)redhat.com>) - Double the packet length to further include packet overhead in memory_limit (Paolo Abeni <pabeni(a)redhat.com>) - Remove the check of qdisc_qlen(sch) when calling qdisc_tree_reduce_backlog (Paolo Abeni <pabeni(a)redhat.com>) v11 (15-Apr-2025) - Replace hstimer_init with hstimer_setup in sch_dualpi2.c v10 (25-Mar-2025) - Remove leftover include in include/linux/netdevice.h and anonymous struct in sch_dualpi2.c (Paolo Abeni <pabeni(a)redhat.com>) - Use kfree_skb_reason() and add SKB_DROP_REASON_DUALPI2_STEP_DROP drop reason (Paolo Abeni <pabeni(a)redhat.com>) - Split sch_dualpi2.c into 3 patches (and overall 5 patches): Struct definition & parsing, Dump stats & configuration, Enqueue/Dequeue (Paolo Abeni <pabeni(a)redhat.com>) v9 (16-Mar-2025) - Fix mem_usage error in previous version - Add min_qlen_step to the dualpi2 attribute as the minimum queue length in number of packets in the L-queue to start step threshold marking. In previous versions, this value was fixed to 2, so the step threshold was applied to mark packets in the L queue only when the queue length of the L queue was greater than or equal to 2 packets. This will cause larger queuing delays for L4S traffic at low rates (<20Mbps). So we parameterize it and change the default value to 0. Comparison of tcp_1down run 'HTB 20Mbit + DUALPI2 + 10ms base delay' Old versions: avg median # data pts Ping (ms) ICMP : 11.55 11.70 ms 350 TCP upload avg : 18.96 N/A Mbits/s 350 TCP upload sum : 18.96 N/A Mbits/s 350 New version (v9): avg median # data pts Ping (ms) ICMP : 10.81 10.70 ms 350 TCP upload avg : 18.91 N/A Mbits/s 350 TCP upload sum : 18.91 N/A Mbits/s 350 Comparison of tcp_1down run 'HTB 10Mbit + DUALPI2 + 10ms base delay' Old versions: avg median # data pts Ping (ms) ICMP : 12.61 12.80 ms 350 TCP upload avg : 9.48 N/A Mbits/s 350 TCP upload sum : 9.48 N/A Mbits/s 350 New version (v9): avg median # data pts Ping (ms) ICMP : 11.06 10.80 ms 350 TCP upload avg : 9.43 N/A Mbits/s 350 TCP upload sum : 9.43 N/A Mbits/s 350 Comparison of tcp_1down run 'HTB 10Mbit + DUALPI2 + 10ms base delay' Old versions: avg median # data pts Ping (ms) ICMP : 40.86 37.45 ms 350 TCP upload avg : 0.88 N/A Mbits/s 350 TCP upload sum : 0.88 N/A Mbits/s 350 TCP upload::1 : 0.88 0.97 Mbits/s 350 New version (v9): avg median # data pts Ping (ms) ICMP : 11.07 10.40 ms 350 TCP upload avg : 0.55 N/A Mbits/s 350 TCP upload sum : 0.55 N/A Mbits/s 350 TCP upload::1 : 0.55 0.59 Mbits/s 350 v8 (11-Mar-2025) - Fix warning messages in v7 v7 (07-Mar-2025) - Separate into 3 patches to avoid mixing changes of documentation, selftest, and code. (Cong Wang <xiyou.wangcong(a)gmail.com>) v6 (04-Mar-2025) - Add modprobe for dulapi2 in tc-testing script tc-testing/tdc.sh (Jakub Kicinski <kuba(a)kernel.org>) - Update test cases in dualpi2.json - Update commit message v5 (22-Feb-2025) - A comparison was done between MQ + DUALPI2, MQ + FQ_PIE, MQ + FQ_CODEL: Unshaped 1gigE with 4 download streams test: - Summary of tcp_4down run 'MQ + FQ_CODEL': avg median # data pts Ping (ms) ICMP : 1.19 1.34 ms 349 TCP download avg : 235.42 N/A Mbits/s 349 TCP download sum : 941.68 N/A Mbits/s 349 TCP download::1 : 235.19 235.39 Mbits/s 349 TCP download::2 : 235.03 235.35 Mbits/s 349 TCP download::3 : 236.89 235.44 Mbits/s 349 TCP download::4 : 234.57 235.19 Mbits/s 349 - Summary of tcp_4down run 'MQ + FQ_PIE' avg median # data pts Ping (ms) ICMP : 1.21 1.37 ms 350 TCP download avg : 235.42 N/A Mbits/s 350 TCP download sum : 941.61 N/A Mbits/s 350 TCP download::1 : 232.54 233.13 Mbits/s 350 TCP download::2 : 232.52 232.80 Mbits/s 350 TCP download::3 : 233.14 233.78 Mbits/s 350 TCP download::4 : 243.41 241.48 Mbits/s 350 - Summary of tcp_4down run 'MQ + DUALPI2' avg median # data pts Ping (ms) ICMP : 1.19 1.34 ms 349 TCP download avg : 235.42 N/A Mbits/s 349 TCP download sum : 941.68 N/A Mbits/s 349 TCP download::1 : 235.19 235.39 Mbits/s 349 TCP download::2 : 235.03 235.35 Mbits/s 349 TCP download::3 : 236.89 235.44 Mbits/s 349 TCP download::4 : 234.57 235.19 Mbits/s 349 Unshaped 1gigE with 128 download streams test: - Summary of tcp_128down run 'MQ + FQ_CODEL': avg median # data pts Ping (ms) ICMP : 1.88 1.86 ms 350 TCP download avg : 7.39 N/A Mbits/s 350 TCP download sum : 946.47 N/A Mbits/s 350 - Summary of tcp_128down run 'MQ + FQ_PIE': avg median # data pts Ping (ms) ICMP : 1.88 1.86 ms 350 TCP download avg : 7.39 N/A Mbits/s 350 TCP download sum : 946.47 N/A Mbits/s 350 - Summary of tcp_128down run 'MQ + DUALPI2': avg median # data pts Ping (ms) ICMP : 1.88 1.86 ms 350 TCP download avg : 7.39 N/A Mbits/s 350 TCP download sum : 946.47 N/A Mbits/s 350 Unshaped 10gigE with 4 download streams test: - Summary of tcp_4down run 'MQ + FQ_CODEL': avg median # data pts Ping (ms) ICMP : 0.22 0.23 ms 350 TCP download avg : 2354.08 N/A Mbits/s 350 TCP download sum : 9416.31 N/A Mbits/s 350 TCP download::1 : 2353.65 2352.81 Mbits/s 350 TCP download::2 : 2354.54 2354.21 Mbits/s 350 TCP download::3 : 2353.56 2353.78 Mbits/s 350 TCP download::4 : 2354.56 2354.45 Mbits/s 350 - Summary of tcp_4down run 'MQ + FQ_PIE': avg median # data pts Ping (ms) ICMP : 0.20 0.19 ms 350 TCP download avg : 2354.76 N/A Mbits/s 350 TCP download sum : 9419.04 N/A Mbits/s 350 TCP download::1 : 2354.77 2353.89 Mbits/s 350 TCP download::2 : 2353.41 2354.29 Mbits/s 350 TCP download::3 : 2356.18 2354.19 Mbits/s 350 TCP download::4 : 2354.68 2353.15 Mbits/s 350 - Summary of tcp_4down run 'MQ + DUALPI2': avg median # data pts Ping (ms) ICMP : 0.24 0.24 ms 350 TCP download avg : 2354.11 N/A Mbits/s 350 TCP download sum : 9416.43 N/A Mbits/s 350 TCP download::1 : 2354.75 2353.93 Mbits/s 350 TCP download::2 : 2353.15 2353.75 Mbits/s 350 TCP download::3 : 2353.49 2353.72 Mbits/s 350 TCP download::4 : 2355.04 2353.73 Mbits/s 350 Unshaped 10gigE with 128 download streams test: - Summary of tcp_128down run 'MQ + FQ_CODEL': avg median # data pts Ping (ms) ICMP : 7.57 8.69 ms 350 TCP download avg : 73.97 N/A Mbits/s 350 TCP download sum : 9467.82 N/A Mbits/s 350 - Summary of tcp_128down run 'MQ + FQ_PIE': avg median # data pts Ping (ms) ICMP : 7.82 8.91 ms 350 TCP download avg : 73.97 N/A Mbits/s 350 TCP download sum : 9468.42 N/A Mbits/s 350 - Summary of tcp_128down run 'MQ + DUALPI2': avg median # data pts Ping (ms) ICMP : 6.87 7.93 ms 350 TCP download avg : 73.95 N/A Mbits/s 350 TCP download sum : 9465.87 N/A Mbits/s 350 From the results shown above, we see small differences between combinations. - Update commit message to include results of no_split_gso and split_gso (Dave Taht <dave.taht(a)gmail.com> and Paolo Abeni <pabeni(a)redhat.com>) - Add memlimit in the dualpi2 attribute, and add memory_used, max_memory_used, memory_limit in dualpi2 stats (Dave Taht <dave.taht(a)gmail.com>) - Update note in sch_dualpi2.c related to BBRv3 status (Dave Taht <dave.taht(a)gmail.com>) - Update license identifier (Dave Taht <dave.taht(a)gmail.com>) - Add selftest in tools/testing/selftests/tc-testing (Cong Wang <xiyou.wangcong(a)gmail.com>) - Use netlink policies for parameter checks (Jamal Hadi Salim <jhs(a)mojatatu.com>) - Modify texts & fix typos in Documentation/netlink/specs/tc.yaml (Dave Taht <dave.taht(a)gmail.com>) - Add descriptions of packet counter statistics and the reset function of sch_dualpi2.c - Fix step_thresh in packets - Update code comments in sch_dualpi2.c v4 (22-Oct-2024) - Update statement in Kconfig for DualPI2 (Stephen Hemminger <stephen(a)networkplumber.org>) - Put a blank line after #define in sch_dualpi2.c (Stephen Hemminger <stephen(a)networkplumber.org>) - Fix line length warning. v3 (19-Oct-2024) - Fix compilaiton error - Update Documentation/netlink/specs/tc.yaml (Jakub Kicinski <kuba(a)kernel.org>) v2 (18-Oct-2024) - Add Documentation/netlink/specs/tc.yaml (Jakub Kicinski <kuba(a)kernel.org>) - Use dualpi2 instead of skb prefix (Jamal Hadi Salim <jhs(a)mojatatu.com>) - Replace nla_parse_nested_deprecated with nla_parse_nested (Jamal Hadi Salim <jhs(a)mojatatu.com>) - Fix line length warning --- Chia-Yu Chang (4): sched: Struct definition and parsing of dualpi2 qdisc sched: Dump configuration and statistics of dualpi2 qdisc selftests/tc-testing: Add selftests for qdisc DualPI2 Documentation: netlink: specs: tc: Add DualPI2 specification Koen De Schepper (1): sched: Add enqueue/dequeue of dualpi2 qdisc Documentation/netlink/specs/tc.yaml | 156 +++ include/net/dropreason-core.h | 6 + include/uapi/linux/pkt_sched.h | 68 + net/sched/Kconfig | 12 + net/sched/Makefile | 1 + net/sched/sch_dualpi2.c | 1146 +++++++++++++++++ tools/testing/selftests/tc-testing/config | 1 + .../tc-testing/tc-tests/qdiscs/dualpi2.json | 254 ++++ tools/testing/selftests/tc-testing/tdc.sh | 1 + 9 files changed, 1645 insertions(+) create mode 100644 net/sched/sch_dualpi2.c create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/dualpi2.json -- 2.34.1

3 months

2
6
0 0

[PATCH net-next v2 13/14] selftests: forwarding: adf_mcd_start(): Allow configuring custom interfaces

by Petr Machata

Tests may wish to add other interfaces to listen on. Notably locally generated traffic uses dummy interfaces. The multicast daemon needs to know about these so that it allows forming rules that involve these interfaces, and so that net.ipv4.conf.X.mc_forwarding is set for the interfaces. To that end, allow passing in a list of interfaces to configure in addition to all the physical ones. Signed-off-by: Petr Machata <petrm(a)nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor(a)blackwall.org> --- Notes: v2: - Adjust as per shellcheck citations - Retain Nik's R-b, the changes were very minor. --- CC: Shuah Khan <shuah(a)kernel.org> CC: linux-kselftest(a)vger.kernel.org tools/testing/selftests/net/forwarding/lib.sh | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index 253847372062..83ee6a07e072 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -1760,9 +1760,12 @@ mc_send() adf_mcd_start() { + local ifs=("$@") + local table_name="$MCD_TABLE_NAME" local smcroutedir local pid + local if local i check_command "$MCD" || return 1 @@ -1776,6 +1779,16 @@ adf_mcd_start() "$smcroutedir/$table_name.conf" done + for if in "${ifs[@]}"; do + if ! ip_link_has_flag "$if" MULTICAST; then + ip link set dev "$if" multicast on + defer ip link set dev "$if" multicast off + fi + + echo "phyint $if enable" >> \ + "$smcroutedir/$table_name.conf" + done + "$MCD" -N -I "$table_name" -f "$smcroutedir/$table_name.conf" \ -P "$smcroutedir/$table_name.pid" busywait "$BUSYWAIT_TIMEOUT" test -e "$smcroutedir/$table_name.pid" -- 2.49.0

3 months

1
0
0 0

[PATCH net-next v2 12/14] selftests: net: lib: Add ip_link_has_flag()

by Petr Machata

Add a helper to determine whether a given netdevice has a given flag. Rewrite ip_link_is_up() in terms of the new helper. Signed-off-by: Petr Machata <petrm(a)nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor(a)blackwall.org> --- Notes: CC: Shuah Khan <shuah(a)kernel.org> CC: linux-kselftest(a)vger.kernel.org tools/testing/selftests/net/lib.sh | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/net/lib.sh b/tools/testing/selftests/net/lib.sh index 006fdadcc4b9..ff0dbe23e8e0 100644 --- a/tools/testing/selftests/net/lib.sh +++ b/tools/testing/selftests/net/lib.sh @@ -547,13 +547,19 @@ ip_link_set_addr() defer ip link set dev "$name" address "$old_addr" } -ip_link_is_up() +ip_link_has_flag() { local name=$1; shift + local flag=$1; shift local state=$(ip -j link show "$name" | - jq -r '(.[].flags[] | select(. == "UP")) // "DOWN"') - [[ $state == "UP" ]] + jq --arg flag "$flag" 'any(.[].flags.[]; . == $flag)') + [[ $state == true ]] +} + +ip_link_is_up() +{ + ip_link_has_flag "$1" UP } ip_link_set_up() -- 2.49.0

3 months

1
0
0 0

[PATCH net-next v2 11/14] selftests: forwarding: lib: Move smcrouted helpers here

by Petr Machata

router_multicast.sh has several helpers for work with smcrouted. Extract them to lib.sh so that other selftests can use them as well. Convert the helpers to defer in the process, because that simplifies the interface quite a bit. Therefore have router_multicast.sh invoke defer_scopes_cleanup() in its cleanup() function. Signed-off-by: Petr Machata <petrm(a)nvidia.com> --- Notes: v2: - Adjust as per shellcheck citations --- CC: Shuah Khan <shuah(a)kernel.org> CC: linux-kselftest(a)vger.kernel.org tools/testing/selftests/net/forwarding/lib.sh | 33 +++++++++++++++++ .../net/forwarding/router_multicast.sh | 35 ++++--------------- 2 files changed, 39 insertions(+), 29 deletions(-) diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index 508f3c700d71..253847372062 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -37,6 +37,7 @@ declare -A NETIFS=( : "${TEAMD:=teamd}" : "${MCD:=smcrouted}" : "${MC_CLI:=smcroutectl}" +: "${MCD_TABLE_NAME:=selftests}" # Constants for netdevice bring-up: # Default time in seconds to wait for an interface to come up before giving up @@ -1757,6 +1758,38 @@ mc_send() msend -g $groups -I $if_name -c 1 > /dev/null 2>&1 } +adf_mcd_start() +{ + local table_name="$MCD_TABLE_NAME" + local smcroutedir + local pid + local i + + check_command "$MCD" || return 1 + check_command "$MC_CLI" || return 1 + + smcroutedir=$(mktemp -d) + defer rm -rf "$smcroutedir" + + for ((i = 1; i <= NUM_NETIFS; ++i)); do + echo "phyint ${NETIFS[p$i]} enable" >> \ + "$smcroutedir/$table_name.conf" + done + + "$MCD" -N -I "$table_name" -f "$smcroutedir/$table_name.conf" \ + -P "$smcroutedir/$table_name.pid" + busywait "$BUSYWAIT_TIMEOUT" test -e "$smcroutedir/$table_name.pid" + pid=$(cat "$smcroutedir/$table_name.pid") + defer kill_process "$pid" +} + +mc_cli() +{ + local table_name="$MCD_TABLE_NAME" + + "$MC_CLI" -I "$table_name" "$@" +} + start_ip_monitor() { local mtype=$1; shift diff --git a/tools/testing/selftests/net/forwarding/router_multicast.sh b/tools/testing/selftests/net/forwarding/router_multicast.sh index 5a58b1ec8aef..83e52abdbc2e 100755 --- a/tools/testing/selftests/net/forwarding/router_multicast.sh +++ b/tools/testing/selftests/net/forwarding/router_multicast.sh @@ -33,10 +33,6 @@ NUM_NETIFS=6 source lib.sh source tc_common.sh -require_command $MCD -require_command $MC_CLI -table_name=selftests - h1_create() { simple_if_init $h1 198.51.100.2/28 2001:db8:1::2/64 @@ -149,25 +145,6 @@ router_destroy() ip link set dev $rp1 down } -start_mcd() -{ - SMCROUTEDIR="$(mktemp -d)" - - for ((i = 1; i <= $NUM_NETIFS; ++i)); do - echo "phyint ${NETIFS[p$i]} enable" >> \ - $SMCROUTEDIR/$table_name.conf - done - - $MCD -N -I $table_name -f $SMCROUTEDIR/$table_name.conf \ - -P $SMCROUTEDIR/$table_name.pid -} - -kill_mcd() -{ - pkill $MCD - rm -rf $SMCROUTEDIR -} - setup_prepare() { h1=${NETIFS[p1]} @@ -179,7 +156,7 @@ setup_prepare() rp3=${NETIFS[p5]} h3=${NETIFS[p6]} - start_mcd + adf_mcd_start || exit "$EXIT_STATUS" vrf_prepare @@ -206,7 +183,7 @@ cleanup() vrf_cleanup - kill_mcd + defer_scopes_cleanup } create_mcast_sg() @@ -214,9 +191,9 @@ create_mcast_sg() local if_name=$1; shift local s_addr=$1; shift local mcast=$1; shift - local dest_ifs=${@} + local dest_ifs=("${@}") - $MC_CLI -I $table_name add $if_name $s_addr $mcast $dest_ifs + mc_cli add "$if_name" "$s_addr" "$mcast" "${dest_ifs[@]}" } delete_mcast_sg() @@ -224,9 +201,9 @@ delete_mcast_sg() local if_name=$1; shift local s_addr=$1; shift local mcast=$1; shift - local dest_ifs=${@} + local dest_ifs=("${@}") - $MC_CLI -I $table_name remove $if_name $s_addr $mcast $dest_ifs + mc_cli remove "$if_name" "$s_addr" "$mcast" "${dest_ifs[@]}" } mcast_v4() -- 2.49.0

3 months

1
0
0 0

[PATCH v4 0/2] x86/fred: Prevent single-step upon ERETU completion

by Xin Li (Intel)

IDT event delivery has a debug hole in which it does not generate #DB upon returning to userspace before the first userspace instruction is executed if the Trap Flag (TF) is set. FRED closes this hole by introducing a software event flag, i.e., bit 17 of the augmented SS: if the bit is set and ERETU would result in RFLAGS.TF = 1, a single-step trap will be pending upon completion of ERETU. However I overlooked properly setting and clearing the bit in different situations. Thus when FRED is enabled, if the Trap Flag (TF) is set without an external debugger attached, it can lead to an infinite loop in the SIGTRAP handler. To avoid this, the software event flag in the augmented SS must be cleared, ensuring that no single-step trap remains pending when ERETU completes. This patch set combines the fix [1] and its corresponding selftest [2] (requested by Dave Hansen) into one patch set. [1] https://lore.kernel.org/lkml/20250523050153.3308237-1-xin@zytor.com/ [2] https://lore.kernel.org/lkml/20250530230707.2528916-1-xin@zytor.com/ This patch set is based on tip/x86/urgent branch as of today. Xin Li (Intel) (2): x86/fred/signal: Prevent single-step upon ERETU completion selftests/x86: Add a test to detect infinite sigtrap handler loop arch/x86/include/asm/sighandling.h | 22 +++++ arch/x86/kernel/signal_32.c | 4 + arch/x86/kernel/signal_64.c | 4 + tools/testing/selftests/x86/Makefile | 2 +- tools/testing/selftests/x86/sigtrap_loop.c | 97 ++++++++++++++++++++++ 5 files changed, 128 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/x86/sigtrap_loop.c base-commit: dd2922dcfaa3296846265e113309e5f7f138839f -- 2.49.0

3 months

4
6
0 0

[PATCH bpf-next v2] selftests/bpf: fix signedness bug in redir_partial()

by Fushuai Wang

When xsend() returns -1 (error), the check 'n < sizeof(buf)' incorrectly treats it as success due to unsigned promotion. Explicitly check for -1 first. Fixes: a4b7193d8efd ("selftests/bpf: Add sockmap test for redirecting partial skb data") Signed-off-by: Fushuai Wang <wangfushuai(a)baidu.com> --- tools/testing/selftests/bpf/prog_tests/sockmap_listen.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/testing/selftests/bpf/prog_tests/sockmap_listen.c b/tools/testing/selftests/bpf/prog_tests/sockmap_listen.c index 1d98eee7a2c3..f1bdccc7e4e7 100644 --- a/tools/testing/selftests/bpf/prog_tests/sockmap_listen.c +++ b/tools/testing/selftests/bpf/prog_tests/sockmap_listen.c @@ -924,6 +924,8 @@ static void redir_partial(int family, int sotype, int sock_map, int parser_map) goto close; n = xsend(c1, buf, sizeof(buf), 0); + if (n == -1) + goto close; if (n < sizeof(buf)) FAIL("incomplete write"); -- 2.36.1

3 months

2
1
0 0

[PATCH net v3 0/2] Fix ntuple rules targeting default RSS

by Gal Pressman

This series addresses a regression in ethtool flow steering where rules targeting the default RSS context (context 0) were incorrectly rejected. The default RSS context always exists but is not stored in the rss_ctx xarray like additional contexts. The current validation logic was checking for the existence of context 0 in this array, causing valid flow steering rules to be rejected. This prevented configurations such as: - High priority rules directing specific traffic to the default context - Low priority catch-all rules directing remaining traffic to additional contexts Patch 1 fixes the validation logic to skip the existence check for context 0. Patch 2 adds a selftest that verifies this behavior. Changelog - v2->v3: https://lore.kernel.org/all/20250609120250.1630125-1-gal@nvidia.com/ * Reworded commit message. * Fix pylint warning. v1->v2: https://lore.kernel.org/all/20250225071348.509432-1-gal@nvidia.com/ * Reworded commit message. * Added a selftest. Gal Pressman (2): net: ethtool: Don't check if RSS context exists in case of context 0 selftests: drv-net: rss_ctx: Add test for ntuple rules targeting default RSS context net/ethtool/ioctl.c | 3 +- .../selftests/drivers/net/hw/rss_ctx.py | 59 ++++++++++++++++++- 2 files changed, 60 insertions(+), 2 deletions(-) -- 2.40.1

3 months

3
4
0 0

[PATCH net-next v3 0/4] udp_tunnel: remove rtnl_lock dependency

by Stanislav Fomichev

Recently bnxt had to grow back a bunch of rtnl dependencies because of udp_tunnel's infra. Add separate (global) mutext to protect udp_tunnel state. v3: - fix 2 test failures (Jakub NIPA) v2: - move the lock into udp_tunnel_nic (Jakub) - reorder the lock ordering (Jakub) - move udp_ports_sleep removal into separate patch and update the test (Jakub) Cc: Michael Chan <michael.chan(a)broadcom.com> Stanislav Fomichev (4): udp_tunnel: remove rtnl_lock dependency net: remove redundant ASSERT_RTNL() in queue setup functions netdevsim: remove udp_ports_sleep Revert "bnxt_en: bring back rtnl_lock() in the bnxt_open() path" .../net/ethernet/broadcom/bnx2x/bnx2x_main.c | 3 +- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 42 ++++--------------- drivers/net/ethernet/emulex/benet/be_main.c | 3 +- drivers/net/ethernet/intel/i40e/i40e_main.c | 1 - drivers/net/ethernet/intel/ice/ice_main.c | 1 - .../net/ethernet/mellanox/mlx4/en_netdev.c | 3 +- .../net/ethernet/mellanox/mlx5/core/en_main.c | 3 +- .../ethernet/netronome/nfp/nfp_net_common.c | 3 +- .../net/ethernet/qlogic/qede/qede_filter.c | 3 -- .../net/ethernet/qlogic/qlcnic/qlcnic_main.c | 1 - drivers/net/ethernet/sfc/ef10.c | 1 - drivers/net/netdevsim/netdevsim.h | 2 - drivers/net/netdevsim/udp_tunnels.c | 12 ------ include/net/udp_tunnel.h | 8 ++-- net/core/dev.c | 2 - net/ipv4/udp_tunnel_nic.c | 30 +++++++------ .../drivers/net/netdevsim/udp_tunnel_nic.sh | 23 +--------- 17 files changed, 32 insertions(+), 109 deletions(-) -- 2.49.0

3 months

3
8
0 0

[PATCH net-next 0/5] netconsole: Add support for msgid in sysdata

by Gustavo Luiz Duarte

This patch series introduces a new feature to netconsole which allows appending a message ID to the userdata dictionary. If the msgid feature is enabled, the message ID is built from a per-target 32 bit counter that is incremented and appended to every message sent to the target. Example:: echo 1 > "/sys/kernel/config/netconsole/cmdline0/userdata/msgid_enabled" echo "This is message #1" > /dev/kmsg echo "This is message #2" > /dev/kmsg 13,434,54928466,-;This is message #1 msgid=1 13,435,54934019,-;This is message #2 msgid=2 This feature can be used by the target to detect if messages were dropped or reordered before reaching the target. This allows system administrators to assess the reliability of their netconsole pipeline and detect loss of messages due to network contention or temporary unavailability. Suggested-by: Breno Leitao <leitao(a)debian.org> Signed-off-by: Gustavo Luiz Duarte <gustavold(a)gmail.com> Note to maintainer: This will conflict with a fix I sent recently to net: c85bf1975108 netconsole: fix appending sysdata when sysdata_fields == SYSDATA_RELEASE Please let me know if I should rebase at some point and send a v2. --- Gustavo Luiz Duarte (5): netconsole: introduce 'msgid' as a new sysdata field netconsole: implement configfs for msgid_enabled netconsole: append msgid to sysdata selftests: netconsole: Add tests for 'msgid' feature in sysdata docs: netconsole: document msgid feature Documentation/networking/netconsole.rst | 22 +++++++ drivers/net/netconsole.c | 67 +++++++++++++++++++++- .../selftests/drivers/net/netcons_sysdata.sh | 30 ++++++++++ 3 files changed, 118 insertions(+), 1 deletion(-) --- base-commit: 0097c4195b1d0ca57d15979626c769c74747b5a0 change-id: 20250609-netconsole-msgid-b93c6f8e9c60 Best regards, -- Gustavo Luiz Duarte <gustavold(a)gmail.com>

3 months

3
11
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror