lng-ci April 2015

lng-ci@lists.linaro.org

1 participants
27 discussions

Build failed in Jenkins: ODP publish » lcov,docker-utopic,generic #65

by ci_notify＠linaro.org

See <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> ------------------------------------------ [...truncated 131 lines...] debconf: unable to initialize frontend: Dialog debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (This frontend requires a controlling tty.) debconf: falling back to frontend: Teletype dpkg-preconfigure: unable to re-open stdin: Fetched 91.5 kB in 0s (336 kB/s) Selecting previously unselected package lcov. (Reading database ... 28436 files and directories currently installed.) Preparing to unpack .../archives/lcov_1.11-2_all.deb ... Unpacking lcov (1.11-2) ... Processing triggers for man-db (2.7.0.2-2) ... Setting up lcov (1.11-2) ... + export LCOV=1 + LCOV=1 + bash -x <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> + set -e + [[ -n '' ]] +++ dirname <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> ++ readlink -f <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> + ROOT_DIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> + source <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> ++ '[' -n '' ']' ++ readonly GENERIC_HELPER=1 ++ GENERIC_HELPER=1 ++ export SRCDIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> ++ SRCDIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> ++ export BUILDDIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> ++ BUILDDIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> ++ export LOGDIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> ++ LOGDIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> ++ export EXTRA_FLAGS=--enable-test-perf ++ EXTRA_FLAGS=--enable-test-perf ++ mkdir -p <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> ++ mkdir -p <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> ++ mkdir -p <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> ++ trap control_c SIGINT + source <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> ++ '[' -n '' ']' ++ readonly TOOLCHAIN_HELPER=1 ++ TOOLCHAIN_HELPER=1 ++ export TOOLCHAIN_RELEASE=14.09 ++ TOOLCHAIN_RELEASE=14.09 + source <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> ++ '[' -n '' ']' ++ readonly OPENSSL_HELPER=1 ++ OPENSSL_HELPER=1 ++ OPENSSL_BUILD_FAILED=0 ++ OPENSSL_GIT=git://git.openssl.org/openssl.git +++ uname -m ++ BASE_ARCH=x86_64 ++ export OPENSSL_SRCDIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> ++ OPENSSL_SRCDIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> ++ export OPENSSL_BUILDDIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> ++ OPENSSL_BUILDDIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> ++ OPENSSL_BRANCH=OpenSSL_1_0_1h ++ export OPENSSL_BUILD=0 ++ OPENSSL_BUILD=0 + source <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> ++ '[' -n '' ']' ++ readonly CUNIT_HELPER=1 ++ CUNIT_HELPER=1 ++ source <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> +++ '[' -n '' ']' +++ readonly VERCOMP_HELPER=1 +++ VERCOMP_HELPER=1 ++ CUNIT_BUILD_FAILED=0 +++ uname -m ++ BASE_ARCH=x86_64 ++ CUNIT_VERSION=2.1-3 ++ VALIDATION=1 ++ export CUNIT_SRCDIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> ++ CUNIT_SRCDIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> ++ export CUNIT_BUILDDIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> ++ CUNIT_BUILDDIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> +++ vercomp '2.1-3 2.1-3' +++ vercomp_internal 2.1-3 2.1-3 +++ [[ 2.1-3 == 2.1-3 ]] +++ return 0 +++ case $? in +++ op== +++ echo = ++ [[ = == \< ]] ++ SF_CUNIT=http://people.linaro.org/~anders.roxell/CUnit/2.1-3/CUnit-2.1-3.ta… + source <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> ++ '[' -n '' ']' ++ readonly COVERITY_HELPER=1 ++ COVERITY_HELPER=1 + export GIT_BRANCH=master + GIT_BRANCH=master + export CLEANUP=1 + CLEANUP=1 + export LCOV=1 + LCOV=1 ++ getconf _NPROCESSORS_ONLN + export NUM_CPUS=8 + NUM_CPUS=8 + export TEST_LIST= + TEST_LIST= + export M32_ON_64=0 + M32_ON_64=0 + export DOXYGEN_HTML=0 + DOXYGEN_HTML=0 + export CLANG=0 + CLANG=0 + export QUIET=0 + QUIET=0 + export EXIT_ON_ERROR=1 + EXIT_ON_ERROR=1 + export CPP_TEST=0 + CPP_TEST=0 + export DISTCHECK=0 + DISTCHECK=0 + export DRYRUN=0 + DRYRUN=0 + E_VALGRIND=0 + [[ ! -z '' ]] + export ODP_SRCDIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> + ODP_SRCDIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> + export ODP_BUILDDIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> + ODP_BUILDDIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> + PLATFORM=linux-generic + GPLATFORM=--with-platform=linux-generic + GLOBAL_DSTDIRPATH=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> + DSTDIR=--prefix=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> + ODP_PUBLISHING=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> + mkdir -p <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> + ODP_LOGDIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> + LOGFILE_BASENAME=default ++ date +%Y%m%d_%H%M + LOGFILE=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> + mkdir -p <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> + trap cleanup_exit INT TERM EXIT + prepare_platform + export PLATFORM_SHORT=generic + PLATFORM_SHORT=generic + [[ -f <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> ]] + source <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> ++ '[' -n '' ']' ++ readonly GENERIC_PLATFORM_HELPER=1 ++ GENERIC_PLATFORM_HELPER=1 + generic_prepare + export GIT_ODP=git://git.linaro.org/lng/odp.git + GIT_ODP=git://git.linaro.org/lng/odp.git + [[ x = \x\-\h ]] + [[ x = \x\-\-\h\e\l\p ]] + getopts hcq opt + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + build_deps + echo 'Preparing platform' Preparing platform + generic_get + : + echo 'Preparing toolchain' Preparing toolchain + toolchain_prepare + [[ -z '' ]] + return + echo 'Building platform' Building platform + dryrun generic_build + [[ 0 -eq 1 ]] + generic_build + : + echo 'Building OpenSSL' Building OpenSSL + dryrun build_openssl + [[ 0 -eq 1 ]] + build_openssl + export OPENSSL_INSTALLDIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> + OPENSSL_INSTALLDIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> + echo 'Building OpenSSL_1_0_1h' Building OpenSSL_1_0_1h + [[ -n '' ]] + [[ 0 -ne 1 ]] + return + echo 'Building CUnit' Building CUnit + dryrun build_cunit + [[ 0 -eq 1 ]] + build_cunit + [[ 1 -eq 1 ]] + export CUNIT_INSTALLDIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> + CUNIT_INSTALLDIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> + echo 'Building CUnit-2.1-3' Building CUnit-2.1-3 + export 'EXTRA_FLAGS=--enable-test-perf --enable-test-vald --with-cunit-path=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…'> + EXTRA_FLAGS='--enable-test-perf --enable-test-vald --with-cunit-path=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…'> + [[ -f <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> ]] + [[ 0 -eq 1 ]] + cunit_fetch + [[ -d <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> ]] + pushd <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> + curl -sSOL http://people.linaro.org/~anders.roxell/CUnit/2.1-3/CUnit-2.1-3.tar.bz2 curl: (56) Recv failure: Connection reset by peer + mkdir -p <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> + tar --strip-components=1 -C <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> -jxf CUnit-2.1-3.tar.bz2 bzip2: Compressed file ends unexpectedly; perhaps it is corrupted? *Possible* reason follows. bzip2: Inappropriate ioctl for device Input file = (stdin), output file = (stdout) It is possible that the compressed file(s) have become corrupted. You can use the -tvv option to test integrity of such files. You can use the `bzip2recover' program to attempt to recover data from undamaged sections of corrupted files. tar: Child returned status 2 tar: Error is not recoverable: exiting now + popd + cunit_new_builddir + rm -rf <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> + cp -rl <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> + pushd <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> + [[ -x bootstrap ]] + ./configure --host= --prefix=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> + make -j 8 + CUNIT_BUILD_FAILED=1 + tail -n 40 <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…>: line 42: ./configure: No such file or directory make: *** No targets specified and no makefile found. Stop. + exit 1 + cleanup_exit + [[ 1 -eq 1 ]] + rm -rf <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> + rm -rf <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> + rm -rf '<https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…'> + rm -f <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> + '[' 1 == 1 ']' + rm -rf <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> + cunit_cleanup + [[ 1 -eq 1 ]] + return + tc_cleanup + rm -rf '<https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…'> + openssl_cleanup + [[ 0 -eq 1 ]] + rm -rf <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> + rm -f <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> + coverity_cleanup + rm -rf <https://ci.linaro.org/jenkins/job/odp-publish/build_type=lcov,label=docker-…> + generic_cleanup + : Build step 'Execute shell' marked build as failure Skipping publisher since build result is FAILURE

9 years, 7 months

Build failed in Jenkins: ODP publish » dox_html,docker-utopic,ks2 #64

by ci_notify＠linaro.org

9 years, 7 months

Build failed in Jenkins: ODP API check » armeb,docker-utopic #263

by ci_notify＠linaro.org

See <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> ------------------------------------------ [...truncated 55 lines...] Get:36 http://archive.ubuntu.com utopic-backports/multiverse amd64 Packages [40 B] Get:37 http://archive.ubuntu.com utopic-backports/main i386 Packages [1439 B] Get:38 http://archive.ubuntu.com utopic-backports/restricted i386 Packages [40 B] Get:39 http://archive.ubuntu.com utopic-backports/universe i386 Packages [13.9 kB] Get:40 http://archive.ubuntu.com utopic-backports/multiverse i386 Packages [40 B] Get:41 http://archive.ubuntu.com utopic-updates/main amd64 Packages [325 kB] Get:42 http://archive.ubuntu.com utopic-updates/restricted amd64 Packages [14.1 kB] Get:43 http://archive.ubuntu.com utopic-updates/universe amd64 Packages [127 kB] Get:44 http://archive.ubuntu.com utopic-updates/multiverse amd64 Packages [3943 B] Get:45 http://archive.ubuntu.com utopic-updates/main i386 Packages [322 kB] Get:46 http://archive.ubuntu.com utopic-updates/restricted i386 Packages [14.1 kB] Get:47 http://archive.ubuntu.com utopic-updates/universe i386 Packages [127 kB] Get:48 http://archive.ubuntu.com utopic-updates/multiverse i386 Packages [4102 B] Fetched 40.4 MB in 3s (12.0 MB/s) Reading package lists... W: Size of file /var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_utopic-security_multiverse_binary-amd64_Packages.gz is not what the server reported 3943 3947 W: Size of file /var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_utopic-updates_multiverse_binary-amd64_Packages.gz is not what the server reported 3943 3947 + sudo apt-get install -y --no-install-recommends libssl-dev Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: libssl1.0.0 zlib1g-dev Recommended packages: libssl-doc The following NEW packages will be installed: libssl-dev zlib1g-dev The following packages will be upgraded: libssl1.0.0 1 upgraded, 2 newly installed, 0 to remove and 61 not upgraded. Need to get 2119 kB of archives. After this operation, 6902 kB of additional disk space will be used. Get:1 http://archive.ubuntu.com/ubuntu/ utopic-updates/main libssl1.0.0 amd64 1.0.1f-1ubuntu9.4 [848 kB] Get:2 http://archive.ubuntu.com/ubuntu/ utopic/main zlib1g-dev amd64 1:1.2.8.dfsg-1ubuntu1 [183 kB] Get:3 http://archive.ubuntu.com/ubuntu/ utopic-updates/main libssl-dev amd64 1.0.1f-1ubuntu9.4 [1087 kB] debconf: unable to initialize frontend: Dialog debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (This frontend requires a controlling tty.) debconf: falling back to frontend: Teletype dpkg-preconfigure: unable to re-open stdin: Fetched 2119 kB in 0s (4374 kB/s) (Reading database ... 28322 files and directories currently installed.) Preparing to unpack .../libssl1.0.0_1.0.1f-1ubuntu9.4_amd64.deb ... Unpacking libssl1.0.0:amd64 (1.0.1f-1ubuntu9.4) over (1.0.1f-1ubuntu9.1) ... Selecting previously unselected package zlib1g-dev:amd64. Preparing to unpack .../zlib1g-dev_1%3a1.2.8.dfsg-1ubuntu1_amd64.deb ... Unpacking zlib1g-dev:amd64 (1:1.2.8.dfsg-1ubuntu1) ... Selecting previously unselected package libssl-dev:amd64. Preparing to unpack .../libssl-dev_1.0.1f-1ubuntu9.4_amd64.deb ... Unpacking libssl-dev:amd64 (1.0.1f-1ubuntu9.4) ... Processing triggers for man-db (2.7.0.2-2) ... Setting up libssl1.0.0:amd64 (1.0.1f-1ubuntu9.4) ... debconf: unable to initialize frontend: Dialog debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (This frontend requires a controlling tty.) debconf: falling back to frontend: Teletype Setting up zlib1g-dev:amd64 (1:1.2.8.dfsg-1ubuntu1) ... Setting up libssl-dev:amd64 (1.0.1f-1ubuntu9.4) ... Processing triggers for libc-bin (2.19-10ubuntu2.2) ... + case "${label}" in + bash -x <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> + set -e + [[ -n armeb ]] + export ARCH +++ dirname <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> ++ readlink -f <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> + ROOT_DIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> + source <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> ++ '[' -n '' ']' ++ readonly GENERIC_HELPER=1 ++ GENERIC_HELPER=1 ++ export SRCDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> ++ SRCDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> ++ export BUILDDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> ++ BUILDDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> ++ export LOGDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> ++ LOGDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> ++ export EXTRA_FLAGS=--enable-test-perf ++ EXTRA_FLAGS=--enable-test-perf ++ mkdir -p <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> ++ mkdir -p <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> ++ mkdir -p <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> ++ trap control_c SIGINT + source <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> ++ '[' -n '' ']' ++ readonly TOOLCHAIN_HELPER=1 ++ TOOLCHAIN_HELPER=1 ++ export TOOLCHAIN_RELEASE=14.09 ++ TOOLCHAIN_RELEASE=14.09 + source <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> ++ '[' -n '' ']' ++ readonly OPENSSL_HELPER=1 ++ OPENSSL_HELPER=1 ++ OPENSSL_BUILD_FAILED=0 ++ OPENSSL_GIT=git://git.openssl.org/openssl.git ++ BASE_ARCH=armeb ++ export OPENSSL_SRCDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> ++ OPENSSL_SRCDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> ++ export OPENSSL_BUILDDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> ++ OPENSSL_BUILDDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> ++ OPENSSL_BRANCH=OpenSSL_1_0_1h ++ export OPENSSL_BUILD=0 ++ OPENSSL_BUILD=0 + source <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> ++ '[' -n '' ']' ++ readonly CUNIT_HELPER=1 ++ CUNIT_HELPER=1 ++ source <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> +++ '[' -n '' ']' +++ readonly VERCOMP_HELPER=1 +++ VERCOMP_HELPER=1 ++ CUNIT_BUILD_FAILED=0 ++ BASE_ARCH=armeb ++ CUNIT_VERSION=2.1-3 ++ VALIDATION=1 ++ export CUNIT_SRCDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> ++ CUNIT_SRCDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> ++ export CUNIT_BUILDDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> ++ CUNIT_BUILDDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> +++ vercomp '2.1-3 2.1-3' +++ vercomp_internal 2.1-3 2.1-3 +++ [[ 2.1-3 == 2.1-3 ]] +++ return 0 +++ case $? in +++ op== +++ echo = ++ [[ = == \< ]] ++ SF_CUNIT=http://people.linaro.org/~anders.roxell/CUnit/2.1-3/CUnit-2.1-3.ta… + source <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> ++ '[' -n '' ']' ++ readonly COVERITY_HELPER=1 ++ COVERITY_HELPER=1 + export GIT_BRANCH=master + GIT_BRANCH=master + export CLEANUP=1 + CLEANUP=1 + export LCOV=0 + LCOV=0 ++ getconf _NPROCESSORS_ONLN + export NUM_CPUS=8 + NUM_CPUS=8 + export TEST_LIST= + TEST_LIST= + export M32_ON_64=0 + M32_ON_64=0 + export DOXYGEN_HTML=0 + DOXYGEN_HTML=0 + export CLANG=0 + CLANG=0 + export QUIET=0 + QUIET=0 + export EXIT_ON_ERROR=1 + EXIT_ON_ERROR=1 + export CPP_TEST=0 + CPP_TEST=0 + export DISTCHECK=0 + DISTCHECK=0 + export DRYRUN=0 + DRYRUN=0 + E_VALGRIND=0 + [[ ! -z '' ]] + export ODP_SRCDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> + ODP_SRCDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> + export ODP_BUILDDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> + ODP_BUILDDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> + PLATFORM=linux-generic + GPLATFORM=--with-platform=linux-generic + GLOBAL_DSTDIRPATH=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> + DSTDIR=--prefix=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> + ODP_PUBLISHING=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> + mkdir -p <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> + ODP_LOGDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> + LOGFILE_BASENAME=default ++ date +%Y%m%d_%H%M + LOGFILE=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> + mkdir -p <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> + trap cleanup_exit INT TERM EXIT + prepare_platform + export PLATFORM_SHORT=generic + PLATFORM_SHORT=generic + [[ -f <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> ]] + source <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> ++ '[' -n '' ']' ++ readonly GENERIC_PLATFORM_HELPER=1 ++ GENERIC_PLATFORM_HELPER=1 + generic_prepare + export GIT_ODP=git://git.linaro.org/lng/odp.git + GIT_ODP=git://git.linaro.org/lng/odp.git + [[ x = \x\-\h ]] + [[ x = \x\-\-\h\e\l\p ]] + getopts hcq opt + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + build_deps + echo 'Preparing platform' Preparing platform + generic_get + : + echo 'Preparing toolchain' Preparing toolchain + toolchain_prepare + [[ -z armeb ]] + [[ armeb == \x\8\6\_\3\2 ]] + find_toolchain_to_download + toolchain_url=http://releases.linaro.org/14.09/components/toolchain/binarie… + [[ armeb == \a\r\m\e\b ]] + toolchain_url=http://releases.linaro.org/14.09/components/toolchain/binarie… + [[ armeb == \a\r\m\6\4 ]] + [[ armeb == \a\r\m\6\4\b\e ]] + echo http://releases.linaro.org/14.09/components/toolchain/binaries/gcc-linaro-a… http://releases.linaro.org/14.09/components/toolchain/binaries/gcc-linaro-a… + export tcbindir=/home/buildslave/armeb-tc-14.09/bin + tcbindir=/home/buildslave/armeb-tc-14.09/bin ++ dirname /home/buildslave/armeb-tc-14.09/bin + mkdir -p /home/buildslave/armeb-tc-14.09 + install_custom_toolchain + test -d /home/buildslave/armeb-tc-14.09/bin + test -z http://releases.linaro.org/14.09/components/toolchain/binaries/gcc-linaro-a… ++ basename http://releases.linaro.org/14.09/components/toolchain/binaries/gcc-linaro-a… + toolchain=gcc-linaro-armeb-linux-gnueabihf-4.9-2014.09_linux.tar.xz + test -f gcc-linaro-armeb-linux-gnueabihf-4.9-2014.09_linux.tar.xz + curl -sSO http://releases.linaro.org/14.09/components/toolchain/binaries/gcc-linaro-a… curl: (56) Recv failure: Connection reset by peer + cleanup_exit + [[ 1 -eq 1 ]] + rm -rf <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> + rm -rf <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> + rm -rf '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…'> + rm -f <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> + '[' 0 == 1 ']' + cunit_cleanup + [[ 0 -eq 1 ]] + rm -rf <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> + tc_cleanup + rm -rf '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…'> + openssl_cleanup + [[ 0 -eq 1 ]] + rm -rf <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> + rm -f <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> + coverity_cleanup + rm -rf <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-uto…> + generic_cleanup + : Build step 'Execute shell' marked build as failure Skipping publisher since build result is FAILURE

9 years, 7 months

Build failed in Jenkins: ODP publish » dox_html,docker-utopic,ks2 #61

by ci_notify＠linaro.org

See <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…> ------------------------------------------ [...truncated 10 lines...] Ign http://security.ubuntu.com utopic-security InRelease Ign http://ppa.launchpad.net utopic InRelease Ign http://ports.ubuntu.com utopic InRelease Get:1 http://security.ubuntu.com utopic-security Release.gpg [933 B] Hit http://ports.ubuntu.com utopic Release.gpg Get:2 http://ppa.launchpad.net utopic Release.gpg [316 B] Get:3 http://security.ubuntu.com utopic-security Release [63.5 kB] Hit http://ports.ubuntu.com utopic Release Ign http://archive.ubuntu.com utopic InRelease Get:4 http://ppa.launchpad.net utopic Release [15.1 kB] Ign http://archive.ubuntu.com utopic-backports InRelease Get:5 http://ports.ubuntu.com utopic/main arm64 Packages [1654 kB] Get:6 http://security.ubuntu.com utopic-security/main amd64 Packages [219 kB] Get:7 http://ppa.launchpad.net utopic/main amd64 Packages [3117 B] Ign http://archive.ubuntu.com utopic-updates InRelease Hit http://archive.ubuntu.com utopic Release.gpg Get:8 http://security.ubuntu.com utopic-security/restricted amd64 Packages [14.1 kB] Get:9 http://ppa.launchpad.net utopic/main arm64 Packages [1889 B] Get:10 http://security.ubuntu.com utopic-security/universe amd64 Packages [87.4 kB] Get:11 http://ports.ubuntu.com utopic/universe arm64 Packages [7590 kB] Get:12 http://ppa.launchpad.net utopic/main armhf Packages [3118 B] Get:13 http://security.ubuntu.com utopic-security/multiverse amd64 Packages [3943 B] Get:14 http://ppa.launchpad.net utopic/main i386 Packages [3110 B] Get:15 http://security.ubuntu.com utopic-security/main i386 Packages [218 kB] Get:16 http://archive.ubuntu.com utopic-backports Release.gpg [933 B] Get:17 http://security.ubuntu.com utopic-security/restricted i386 Packages [14.1 kB] Get:18 http://archive.ubuntu.com utopic-updates Release.gpg [933 B] Get:19 http://security.ubuntu.com utopic-security/universe i386 Packages [87.4 kB] Get:20 http://security.ubuntu.com utopic-security/multiverse i386 Packages [4102 B] Hit http://archive.ubuntu.com utopic Release Get:21 http://ports.ubuntu.com utopic/main armhf Packages [1687 kB] Get:22 http://ports.ubuntu.com utopic/universe armhf Packages [7803 kB] Get:23 http://archive.ubuntu.com utopic-backports Release [63.5 kB] Get:24 http://archive.ubuntu.com utopic-updates Release [63.5 kB] Get:25 http://archive.ubuntu.com utopic/main amd64 Packages [1731 kB] Get:26 http://archive.ubuntu.com utopic/restricted amd64 Packages [18.4 kB] Get:27 http://archive.ubuntu.com utopic/universe amd64 Packages [8000 kB] Get:28 http://archive.ubuntu.com utopic/multiverse amd64 Packages [168 kB] Get:29 http://archive.ubuntu.com utopic/main i386 Packages [1727 kB] Get:30 http://archive.ubuntu.com utopic/restricted i386 Packages [18.9 kB] Get:31 http://archive.ubuntu.com utopic/universe i386 Packages [8008 kB] Get:32 http://archive.ubuntu.com utopic/multiverse i386 Packages [170 kB] Get:33 http://archive.ubuntu.com utopic-backports/main amd64 Packages [1437 B] Get:34 http://archive.ubuntu.com utopic-backports/restricted amd64 Packages [40 B] Get:35 http://archive.ubuntu.com utopic-backports/universe amd64 Packages [14.7 kB] Get:36 http://archive.ubuntu.com utopic-backports/multiverse amd64 Packages [40 B] Get:37 http://archive.ubuntu.com utopic-backports/main i386 Packages [1439 B] Get:38 http://archive.ubuntu.com utopic-backports/restricted i386 Packages [40 B] Get:39 http://archive.ubuntu.com utopic-backports/universe i386 Packages [13.9 kB] Get:40 http://archive.ubuntu.com utopic-backports/multiverse i386 Packages [40 B] Get:41 http://archive.ubuntu.com utopic-updates/main amd64 Packages [325 kB] Get:42 http://archive.ubuntu.com utopic-updates/restricted amd64 Packages [14.1 kB] Get:43 http://archive.ubuntu.com utopic-updates/universe amd64 Packages [127 kB] Get:44 http://archive.ubuntu.com utopic-updates/multiverse amd64 Packages [3943 B] Get:45 http://archive.ubuntu.com utopic-updates/main i386 Packages [322 kB] Get:46 http://archive.ubuntu.com utopic-updates/restricted i386 Packages [14.1 kB] Get:47 http://archive.ubuntu.com utopic-updates/universe i386 Packages [127 kB] Get:48 http://archive.ubuntu.com utopic-updates/multiverse i386 Packages [4102 B] Fetched 40.4 MB in 8s (4731 kB/s) Reading package lists... W: Size of file /var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_utopic-security_multiverse_binary-amd64_Packages.gz is not what the server reported 3943 3947 W: Size of file /var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_utopic-updates_multiverse_binary-amd64_Packages.gz is not what the server reported 3943 3947 + sudo apt-get install -y --no-install-recommends libssl-dev Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: libssl1.0.0 zlib1g-dev Recommended packages: libssl-doc The following NEW packages will be installed: libssl-dev zlib1g-dev The following packages will be upgraded: libssl1.0.0 1 upgraded, 2 newly installed, 0 to remove and 61 not upgraded. Need to get 2119 kB of archives. After this operation, 6902 kB of additional disk space will be used. Get:1 http://archive.ubuntu.com/ubuntu/ utopic-updates/main libssl1.0.0 amd64 1.0.1f-1ubuntu9.4 [848 kB] Get:2 http://archive.ubuntu.com/ubuntu/ utopic/main zlib1g-dev amd64 1:1.2.8.dfsg-1ubuntu1 [183 kB] Get:3 http://archive.ubuntu.com/ubuntu/ utopic-updates/main libssl-dev amd64 1.0.1f-1ubuntu9.4 [1087 kB] debconf: unable to initialize frontend: Dialog debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (This frontend requires a controlling tty.) debconf: falling back to frontend: Teletype dpkg-preconfigure: unable to re-open stdin: Fetched 2119 kB in 0s (4414 kB/s) (Reading database ... 28322 files and directories currently installed.) Preparing to unpack .../libssl1.0.0_1.0.1f-1ubuntu9.4_amd64.deb ... Unpacking libssl1.0.0:amd64 (1.0.1f-1ubuntu9.4) over (1.0.1f-1ubuntu9.1) ... Selecting previously unselected package zlib1g-dev:amd64. Preparing to unpack .../zlib1g-dev_1%3a1.2.8.dfsg-1ubuntu1_amd64.deb ... Unpacking zlib1g-dev:amd64 (1:1.2.8.dfsg-1ubuntu1) ... Selecting previously unselected package libssl-dev:amd64. Preparing to unpack .../libssl-dev_1.0.1f-1ubuntu9.4_amd64.deb ... Unpacking libssl-dev:amd64 (1.0.1f-1ubuntu9.4) ... Processing triggers for man-db (2.7.0.2-2) ... Setting up libssl1.0.0:amd64 (1.0.1f-1ubuntu9.4) ... debconf: unable to initialize frontend: Dialog debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (This frontend requires a controlling tty.) debconf: falling back to frontend: Teletype Setting up zlib1g-dev:amd64 (1:1.2.8.dfsg-1ubuntu1) ... Setting up libssl-dev:amd64 (1.0.1f-1ubuntu9.4) ... Processing triggers for libc-bin (2.19-10ubuntu2.2) ... + case "${platform_type}" in + case "${build_type}" in + sudo apt-get install -y --no-install-recommends graphviz doxygen Reading package lists... Building dependency tree... Reading state information... doxygen is already the newest version. The following extra packages will be installed: libcdt5 libcgraph6 libgd3 libgvc6 libgvpr2 libice6 libltdl7 libpathplan4 libsm6 libvpx1 libxaw7 libxmu6 libxpm4 libxt6 Suggested packages: gsfonts graphviz-doc libgd-tools Recommended packages: fonts-liberation The following NEW packages will be installed: graphviz libcdt5 libcgraph6 libgd3 libgvc6 libgvpr2 libice6 libltdl7 libpathplan4 libsm6 libvpx1 libxaw7 libxmu6 libxpm4 libxt6 0 upgraded, 15 newly installed, 0 to remove and 61 not upgraded. Need to get 2762 kB of archives. After this operation, 16.4 MB of additional disk space will be used. Get:1 http://archive.ubuntu.com/ubuntu/ utopic/main libvpx1 amd64 1.3.0-2.1 [586 kB] Get:2 http://archive.ubuntu.com/ubuntu/ utopic/main libxpm4 amd64 1:3.5.11-1 [33.1 kB] Get:3 http://archive.ubuntu.com/ubuntu/ utopic/main libgd3 amd64 2.1.0-4 [122 kB] Get:4 http://archive.ubuntu.com/ubuntu/ utopic/main libice6 amd64 2:1.0.9-1 [39.2 kB] Get:5 http://archive.ubuntu.com/ubuntu/ utopic/main libltdl7 amd64 2.4.2-1.10ubuntu1 [35.3 kB] Get:6 http://archive.ubuntu.com/ubuntu/ utopic/main libsm6 amd64 2:1.2.2-1 [15.8 kB] Get:7 http://archive.ubuntu.com/ubuntu/ utopic/main libxt6 amd64 1:1.1.4-1 [185 kB] Get:8 http://archive.ubuntu.com/ubuntu/ utopic/main libxmu6 amd64 2:1.1.2-1 [45.3 kB] Get:9 http://archive.ubuntu.com/ubuntu/ utopic/main libxaw7 amd64 2:1.0.12-2 [168 kB] Get:10 http://archive.ubuntu.com/ubuntu/ utopic-updates/main libcdt5 amd64 2.38.0-5ubuntu0.1 [23.6 kB] Get:11 http://archive.ubuntu.com/ubuntu/ utopic-updates/main libcgraph6 amd64 2.38.0-5ubuntu0.1 [43.9 kB] Get:12 http://archive.ubuntu.com/ubuntu/ utopic-updates/main libpathplan4 amd64 2.38.0-5ubuntu0.1 [26.8 kB] Get:13 http://archive.ubuntu.com/ubuntu/ utopic-updates/main libgvc6 amd64 2.38.0-5ubuntu0.1 [592 kB] Get:14 http://archive.ubuntu.com/ubuntu/ utopic-updates/main libgvpr2 amd64 2.38.0-5ubuntu0.1 [170 kB] Get:15 http://archive.ubuntu.com/ubuntu/ utopic-updates/main graphviz amd64 2.38.0-5ubuntu0.1 [676 kB] debconf: unable to initialize frontend: Dialog debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (This frontend requires a controlling tty.) debconf: falling back to frontend: Teletype dpkg-preconfigure: unable to re-open stdin: Fetched 2762 kB in 1s (2626 kB/s) Selecting previously unselected package libvpx1:amd64. (Reading database ... 28436 files and directories currently installed.) Preparing to unpack .../libvpx1_1.3.0-2.1_amd64.deb ... Unpacking libvpx1:amd64 (1.3.0-2.1) ... Selecting previously unselected package libxpm4:amd64. Preparing to unpack .../libxpm4_1%3a3.5.11-1_amd64.deb ... Unpacking libxpm4:amd64 (1:3.5.11-1) ... Selecting previously unselected package libgd3:amd64. Preparing to unpack .../libgd3_2.1.0-4_amd64.deb ... Unpacking libgd3:amd64 (2.1.0-4) ... Selecting previously unselected package libice6:amd64. Preparing to unpack .../libice6_2%3a1.0.9-1_amd64.deb ... Unpacking libice6:amd64 (2:1.0.9-1) ... Selecting previously unselected package libltdl7:amd64. Preparing to unpack .../libltdl7_2.4.2-1.10ubuntu1_amd64.deb ... Unpacking libltdl7:amd64 (2.4.2-1.10ubuntu1) ... Selecting previously unselected package libsm6:amd64. Preparing to unpack .../libsm6_2%3a1.2.2-1_amd64.deb ... Unpacking libsm6:amd64 (2:1.2.2-1) ... Selecting previously unselected package libxt6:amd64. Preparing to unpack .../libxt6_1%3a1.1.4-1_amd64.deb ... Unpacking libxt6:amd64 (1:1.1.4-1) ... Selecting previously unselected package libxmu6:amd64. Preparing to unpack .../libxmu6_2%3a1.1.2-1_amd64.deb ... Unpacking libxmu6:amd64 (2:1.1.2-1) ... Selecting previously unselected package libxaw7:amd64. Preparing to unpack .../libxaw7_2%3a1.0.12-2_amd64.deb ... Unpacking libxaw7:amd64 (2:1.0.12-2) ... Selecting previously unselected package libcdt5. Preparing to unpack .../libcdt5_2.38.0-5ubuntu0.1_amd64.deb ... Unpacking libcdt5 (2.38.0-5ubuntu0.1) ... Selecting previously unselected package libcgraph6. Preparing to unpack .../libcgraph6_2.38.0-5ubuntu0.1_amd64.deb ... Unpacking libcgraph6 (2.38.0-5ubuntu0.1) ... Selecting previously unselected package libpathplan4. Preparing to unpack .../libpathplan4_2.38.0-5ubuntu0.1_amd64.deb ... Unpacking libpathplan4 (2.38.0-5ubuntu0.1) ... Selecting previously unselected package libgvc6. Preparing to unpack .../libgvc6_2.38.0-5ubuntu0.1_amd64.deb ... Unpacking libgvc6 (2.38.0-5ubuntu0.1) ... Selecting previously unselected package libgvpr2. Preparing to unpack .../libgvpr2_2.38.0-5ubuntu0.1_amd64.deb ... Unpacking libgvpr2 (2.38.0-5ubuntu0.1) ... Selecting previously unselected package graphviz. Preparing to unpack .../graphviz_2.38.0-5ubuntu0.1_amd64.deb ... Unpacking graphviz (2.38.0-5ubuntu0.1) ... Processing triggers for man-db (2.7.0.2-2) ... Setting up libvpx1:amd64 (1.3.0-2.1) ... Setting up libxpm4:amd64 (1:3.5.11-1) ... Setting up libgd3:amd64 (2.1.0-4) ... Setting up libice6:amd64 (2:1.0.9-1) ... Setting up libltdl7:amd64 (2.4.2-1.10ubuntu1) ... Setting up libsm6:amd64 (2:1.2.2-1) ... Setting up libxt6:amd64 (1:1.1.4-1) ... Setting up libxmu6:amd64 (2:1.1.2-1) ... Setting up libxaw7:amd64 (2:1.0.12-2) ... Setting up libcdt5 (2.38.0-5ubuntu0.1) ... Setting up libcgraph6 (2.38.0-5ubuntu0.1) ... Setting up libpathplan4 (2.38.0-5ubuntu0.1) ... Setting up libgvc6 (2.38.0-5ubuntu0.1) ... Setting up libgvpr2 (2.38.0-5ubuntu0.1) ... Setting up graphviz (2.38.0-5ubuntu0.1) ... Processing triggers for libc-bin (2.19-10ubuntu2.2) ... + export DOXYGEN_HTML=1 + DOXYGEN_HTML=1 + bash -x <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…> + set -e + export ARCH=arm + ARCH=arm + export PLATFORM=linux-keystone2 + PLATFORM=linux-keystone2 +++ dirname <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…> ++ readlink -f <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…> + export ROOT_DIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…> + ROOT_DIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…> + source <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…> ++ '[' -n '' ']' ++ readonly GENERIC_HELPER=1 ++ GENERIC_HELPER=1 ++ export SRCDIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…> ++ SRCDIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…> ++ export BUILDDIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…> ++ BUILDDIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…> ++ export LOGDIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…> ++ LOGDIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…> ++ export EXTRA_FLAGS=--enable-test-perf ++ EXTRA_FLAGS=--enable-test-perf ++ mkdir -p <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…> ++ mkdir -p <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…> ++ mkdir -p <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…> ++ trap control_c SIGINT + export ODP_BUILDDIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…> + ODP_BUILDDIR=<https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…> + <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…> Preparing platform curl: (56) Recv failure: Connection reset by peer Build step 'Execute shell' marked build as failure Skipping publisher since build result is FAILURE

9 years, 7 months

Build failed in Jenkins: ODP API check » arm64be,docker-utopic #262

by ci_notify＠linaro.org

See <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> ------------------------------------------ [...truncated 55 lines...] Get:36 http://archive.ubuntu.com utopic-backports/multiverse amd64 Packages [40 B] Get:37 http://archive.ubuntu.com utopic-backports/main i386 Packages [1439 B] Get:38 http://archive.ubuntu.com utopic-backports/restricted i386 Packages [40 B] Get:39 http://archive.ubuntu.com utopic-backports/universe i386 Packages [13.9 kB] Get:40 http://archive.ubuntu.com utopic-backports/multiverse i386 Packages [40 B] Get:41 http://archive.ubuntu.com utopic-updates/main amd64 Packages [325 kB] Get:42 http://archive.ubuntu.com utopic-updates/restricted amd64 Packages [14.1 kB] Get:43 http://archive.ubuntu.com utopic-updates/universe amd64 Packages [127 kB] Get:44 http://archive.ubuntu.com utopic-updates/multiverse amd64 Packages [3943 B] Get:45 http://archive.ubuntu.com utopic-updates/main i386 Packages [322 kB] Get:46 http://archive.ubuntu.com utopic-updates/restricted i386 Packages [14.1 kB] Get:47 http://archive.ubuntu.com utopic-updates/universe i386 Packages [127 kB] Get:48 http://archive.ubuntu.com utopic-updates/multiverse i386 Packages [4102 B] Fetched 40.4 MB in 8s (5026 kB/s) Reading package lists... W: Size of file /var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_utopic-security_multiverse_binary-amd64_Packages.gz is not what the server reported 3943 3947 W: Size of file /var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_utopic-updates_multiverse_binary-amd64_Packages.gz is not what the server reported 3943 3947 + sudo apt-get install -y --no-install-recommends libssl-dev Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: libssl1.0.0 zlib1g-dev Recommended packages: libssl-doc The following NEW packages will be installed: libssl-dev zlib1g-dev The following packages will be upgraded: libssl1.0.0 1 upgraded, 2 newly installed, 0 to remove and 61 not upgraded. Need to get 2119 kB of archives. After this operation, 6902 kB of additional disk space will be used. Get:1 http://archive.ubuntu.com/ubuntu/ utopic-updates/main libssl1.0.0 amd64 1.0.1f-1ubuntu9.4 [848 kB] Get:2 http://archive.ubuntu.com/ubuntu/ utopic/main zlib1g-dev amd64 1:1.2.8.dfsg-1ubuntu1 [183 kB] Get:3 http://archive.ubuntu.com/ubuntu/ utopic-updates/main libssl-dev amd64 1.0.1f-1ubuntu9.4 [1087 kB] debconf: unable to initialize frontend: Dialog debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (This frontend requires a controlling tty.) debconf: falling back to frontend: Teletype dpkg-preconfigure: unable to re-open stdin: Fetched 2119 kB in 2s (953 kB/s) (Reading database ... 28322 files and directories currently installed.) Preparing to unpack .../libssl1.0.0_1.0.1f-1ubuntu9.4_amd64.deb ... Unpacking libssl1.0.0:amd64 (1.0.1f-1ubuntu9.4) over (1.0.1f-1ubuntu9.1) ... Selecting previously unselected package zlib1g-dev:amd64. Preparing to unpack .../zlib1g-dev_1%3a1.2.8.dfsg-1ubuntu1_amd64.deb ... Unpacking zlib1g-dev:amd64 (1:1.2.8.dfsg-1ubuntu1) ... Selecting previously unselected package libssl-dev:amd64. Preparing to unpack .../libssl-dev_1.0.1f-1ubuntu9.4_amd64.deb ... Unpacking libssl-dev:amd64 (1.0.1f-1ubuntu9.4) ... Processing triggers for man-db (2.7.0.2-2) ... Setting up libssl1.0.0:amd64 (1.0.1f-1ubuntu9.4) ... debconf: unable to initialize frontend: Dialog debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (This frontend requires a controlling tty.) debconf: falling back to frontend: Teletype Setting up zlib1g-dev:amd64 (1:1.2.8.dfsg-1ubuntu1) ... Setting up libssl-dev:amd64 (1.0.1f-1ubuntu9.4) ... Processing triggers for libc-bin (2.19-10ubuntu2.2) ... + case "${label}" in + bash -x <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> + set -e + [[ -n arm64be ]] + export ARCH +++ dirname <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> ++ readlink -f <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> + ROOT_DIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> + source <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> ++ '[' -n '' ']' ++ readonly GENERIC_HELPER=1 ++ GENERIC_HELPER=1 ++ export SRCDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> ++ SRCDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> ++ export BUILDDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> ++ BUILDDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> ++ export LOGDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> ++ LOGDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> ++ export EXTRA_FLAGS=--enable-test-perf ++ EXTRA_FLAGS=--enable-test-perf ++ mkdir -p <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> ++ mkdir -p <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> ++ mkdir -p <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> ++ trap control_c SIGINT + source <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> ++ '[' -n '' ']' ++ readonly TOOLCHAIN_HELPER=1 ++ TOOLCHAIN_HELPER=1 ++ export TOOLCHAIN_RELEASE=14.09 ++ TOOLCHAIN_RELEASE=14.09 + source <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> ++ '[' -n '' ']' ++ readonly OPENSSL_HELPER=1 ++ OPENSSL_HELPER=1 ++ OPENSSL_BUILD_FAILED=0 ++ OPENSSL_GIT=git://git.openssl.org/openssl.git ++ BASE_ARCH=arm64be ++ export OPENSSL_SRCDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> ++ OPENSSL_SRCDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> ++ export OPENSSL_BUILDDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> ++ OPENSSL_BUILDDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> ++ OPENSSL_BRANCH=OpenSSL_1_0_1h ++ export OPENSSL_BUILD=0 ++ OPENSSL_BUILD=0 + source <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> ++ '[' -n '' ']' ++ readonly CUNIT_HELPER=1 ++ CUNIT_HELPER=1 ++ source <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> +++ '[' -n '' ']' +++ readonly VERCOMP_HELPER=1 +++ VERCOMP_HELPER=1 ++ CUNIT_BUILD_FAILED=0 ++ BASE_ARCH=arm64be ++ CUNIT_VERSION=2.1-3 ++ VALIDATION=1 ++ export CUNIT_SRCDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> ++ CUNIT_SRCDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> ++ export CUNIT_BUILDDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> ++ CUNIT_BUILDDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> +++ vercomp '2.1-3 2.1-3' +++ vercomp_internal 2.1-3 2.1-3 +++ [[ 2.1-3 == 2.1-3 ]] +++ return 0 +++ case $? in +++ op== +++ echo = ++ [[ = == \< ]] ++ SF_CUNIT=http://people.linaro.org/~anders.roxell/CUnit/2.1-3/CUnit-2.1-3.ta… + source <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> ++ '[' -n '' ']' ++ readonly COVERITY_HELPER=1 ++ COVERITY_HELPER=1 + export GIT_BRANCH=master + GIT_BRANCH=master + export CLEANUP=1 + CLEANUP=1 + export LCOV=0 + LCOV=0 ++ getconf _NPROCESSORS_ONLN + export NUM_CPUS=8 + NUM_CPUS=8 + export TEST_LIST= + TEST_LIST= + export M32_ON_64=0 + M32_ON_64=0 + export DOXYGEN_HTML=0 + DOXYGEN_HTML=0 + export CLANG=0 + CLANG=0 + export QUIET=0 + QUIET=0 + export EXIT_ON_ERROR=1 + EXIT_ON_ERROR=1 + export CPP_TEST=0 + CPP_TEST=0 + export DISTCHECK=0 + DISTCHECK=0 + export DRYRUN=0 + DRYRUN=0 + E_VALGRIND=0 + [[ ! -z '' ]] + export ODP_SRCDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> + ODP_SRCDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> + export ODP_BUILDDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> + ODP_BUILDDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> + PLATFORM=linux-generic + GPLATFORM=--with-platform=linux-generic + GLOBAL_DSTDIRPATH=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> + DSTDIR=--prefix=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> + ODP_PUBLISHING=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> + mkdir -p <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> + ODP_LOGDIR=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> + LOGFILE_BASENAME=default ++ date +%Y%m%d_%H%M + LOGFILE=<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> + mkdir -p <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> + trap cleanup_exit INT TERM EXIT + prepare_platform + export PLATFORM_SHORT=generic + PLATFORM_SHORT=generic + [[ -f <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> ]] + source <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> ++ '[' -n '' ']' ++ readonly GENERIC_PLATFORM_HELPER=1 ++ GENERIC_PLATFORM_HELPER=1 + generic_prepare + export GIT_ODP=git://git.linaro.org/lng/odp.git + GIT_ODP=git://git.linaro.org/lng/odp.git + [[ x = \x\-\h ]] + [[ x = \x\-\-\h\e\l\p ]] + getopts hcq opt + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + build_deps + echo 'Preparing platform' Preparing platform + generic_get + : + echo 'Preparing toolchain' Preparing toolchain + toolchain_prepare + [[ -z arm64be ]] + [[ arm64be == \x\8\6\_\3\2 ]] + find_toolchain_to_download + toolchain_url=http://releases.linaro.org/14.09/components/toolchain/binarie… + [[ arm64be == \a\r\m\e\b ]] + [[ arm64be == \a\r\m\6\4 ]] + [[ arm64be == \a\r\m\6\4\b\e ]] + toolchain_url=http://releases.linaro.org/14.09/components/toolchain/binarie… + echo http://releases.linaro.org/14.09/components/toolchain/binaries/gcc-linaro-a… http://releases.linaro.org/14.09/components/toolchain/binaries/gcc-linaro-a… + export tcbindir=/home/buildslave/arm64be-tc-14.09/bin + tcbindir=/home/buildslave/arm64be-tc-14.09/bin ++ dirname /home/buildslave/arm64be-tc-14.09/bin + mkdir -p /home/buildslave/arm64be-tc-14.09 + install_custom_toolchain + test -d /home/buildslave/arm64be-tc-14.09/bin + test -z http://releases.linaro.org/14.09/components/toolchain/binaries/gcc-linaro-a… ++ basename http://releases.linaro.org/14.09/components/toolchain/binaries/gcc-linaro-a… + toolchain=gcc-linaro-aarch64_be-linux-gnu-4.9-2014.09_linux.tar.xz + test -f gcc-linaro-aarch64_be-linux-gnu-4.9-2014.09_linux.tar.xz + curl -sSO http://releases.linaro.org/14.09/components/toolchain/binaries/gcc-linaro-a… curl: (56) Recv failure: Connection reset by peer + cleanup_exit + [[ 1 -eq 1 ]] + rm -rf <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> + rm -rf <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> + rm -rf '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…'> + rm -f <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> + '[' 0 == 1 ']' + cunit_cleanup + [[ 0 -eq 1 ]] + rm -rf <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> + tc_cleanup + rm -rf '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…'> + openssl_cleanup + [[ 0 -eq 1 ]] + rm -rf <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> + rm -f <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> + coverity_cleanup + rm -rf <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64be,label=docker-u…> + generic_cleanup + : Build step 'Execute shell' marked build as failure Skipping publisher since build result is FAILURE

9 years, 7 months

Build failed in Jenkins: ODP publish » dox_html,docker-utopic,dpdk #46

by ci_notify＠linaro.org

See <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…> ------------------------------------------ [...truncated 879 lines...] checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... gcc3 checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking whether make supports nested variables... (cached) yes checking for doxygen... /usr/bin/doxygen checking for perl... /usr/bin/perl checking for latex... no configure: WARNING: latex not found - will not generate doxygen PostScript documentation checking for makeindex... no checking for dvips... no checking for egrep... /bin/egrep checking for pdflatex... no configure: WARNING: pdflatex not found - will not generate doxygen PDF documentation checking for makeindex... no checking for egrep... (cached) /bin/egrep checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking whether gcc understands -c and -o together... (cached) yes checking dependency style of gcc... (cached) gcc3 checking whether make sets $(MAKE)... (cached) yes checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for mt... mt checking if mt is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for sys/types.h... (cached) yes checking for netinet/in.h... yes checking for arpa/nameser.h... yes checking for netdb.h... yes checking for resolv.h... yes checking arpa/inet.h usability... yes checking arpa/inet.h presence... yes checking for arpa/inet.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking for inttypes.h... (cached) yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking for netdb.h... (cached) yes checking for netinet/in.h... (cached) yes checking stddef.h usability... yes checking stddef.h presence... yes checking for stddef.h... yes checking for stdint.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking for unistd.h... (cached) yes checking for stdbool.h that conforms to C99... yes checking for _Bool... yes checking for inline... inline checking for size_t... yes checking for ssize_t... yes checking for uint8_t... yes checking for uint16_t... yes checking for int32_t... yes checking for uint32_t... yes checking for uint64_t... yes checking if compiler needs -Werror to reject unknown flags... no checking for the pthreads library -lpthreads... no checking whether pthreads work without any flags... no checking whether pthreads work with -Kthread... no checking whether pthreads work with -kthread... no checking for the pthreads library -llthread... no checking whether pthreads work with -pthread... yes checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE checking if more special flags are required for pthreads... no checking for PTHREAD_PRIO_INHERIT... yes checking for doxygen... doxygen checking for EVP_EncryptInit in -lcrypto... yes checking openssl/des.h usability... yes checking openssl/des.h presence... yes checking for openssl/des.h... yes checking openssl/rand.h usability... yes checking openssl/rand.h presence... yes checking for openssl/rand.h... yes checking openssl/hmac.h usability... yes checking openssl/hmac.h presence... yes checking for openssl/hmac.h... yes checking openssl/evp.h usability... yes checking openssl/evp.h presence... yes checking for openssl/evp.h... yes checking for stdlib.h... (cached) yes checking for GNU libc compatible malloc... yes checking for stdlib.h... (cached) yes checking for unistd.h... (cached) yes checking for sys/param.h... yes checking for getpagesize... yes checking for working mmap... yes checking for bzero... yes checking for clock_gettime... yes checking for gethostbyname... yes checking for getpagesize... (cached) yes checking for gettimeofday... yes checking for memset... yes checking for munmap... yes checking for socket... yes checking for strchr... yes checking for strerror... yes checking for strrchr... yes checking for strstr... yes checking for strtoull... yes checking for library containing timer_create... -lrt checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating platform/Makefile config.status: creating platform/linux-generic/Makefile config.status: creating platform/linux-dpdk/Makefile config.status: creating example/Makefile config.status: creating example/generator/Makefile config.status: creating example/ipsec/Makefile config.status: creating example/l2fwd/Makefile config.status: creating example/odp_example/Makefile config.status: creating example/packet/Makefile config.status: creating example/timer/Makefile config.status: creating test/Makefile config.status: creating test/api_test/Makefile config.status: creating pkgconfig/libodp.pc config.status: creating helper/config.h config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --enable-test-perf, --enable-test-vald, --with-cunit-path opendataplane 0.2 ======== with_platform: linux-dpdk prefix: <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…> sysconfdir: ${prefix}/etc libdir: ${exec_prefix}/lib includedir: ${prefix}/include compiler: gcc cflags: -g -O2 am_cflags: -pthread -DODP_DEBUG_PRINT=1 -W -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wold-style-definition -Wpointer-arith -Wcast-align -Wnested-externs -Wcast-qual -Wformat-nonliteral -Wformat-security -Wundef -Wwrite-strings ldflags: am_ldflags: -pthread -lrt rm -rf doxygen-doc SRCDIR='.' PROJECT='OpenDataPlane' DOCDIR='doxygen-doc' VERSION='0.2' PERL_PATH='/usr/bin/perl' HAVE_DOT='NO' GENERATE_MAN='NO' GENERATE_RTF='NO' GENERATE_XML='NO' GENERATE_HTMLHELP='NO' GENERATE_CHI='NO' GENERATE_HTML='YES' GENERATE_LATEX='NO' /usr/bin/doxygen ./doc/doxygen.cfg <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…>:28: warning: Compound loopback_db_t is not documented. <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…>:33: warning: Compound odp_pktio_params_t is not documented. <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…>:12: warning: included file odp_example_ipsec.c is not found. Check your EXAMPLE_PATH <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…>:81: warning: Member SHM_PKT_POOL_BUF_SIZE (macro definition) of file odp_ipsec.c is not documented. <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…>:82: warning: Member SHM_PKT_POOL_SIZE (macro definition) of file odp_ipsec.c is not documented. <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…>:90: warning: Member SHM_OUT_POOL_BUF_SIZE (macro definition) of file odp_ipsec.c is not documented. <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…>:91: warning: Member SHM_OUT_POOL_SIZE (macro definition) of file odp_ipsec.c is not documented. <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…>:156: warning: Member SHM_CTX_POOL_BUF_SIZE (macro definition) of file odp_ipsec.c is not documented. <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…>:157: warning: Member SHM_CTX_POOL_BUF_COUNT (macro definition) of file odp_ipsec.c is not documented. <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…>:158: warning: Member SHM_CTX_POOL_SIZE (macro definition) of file odp_ipsec.c is not documented. <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…>:359: warning: Member SCHEDULE(q, w) (macro definition) of file odp_ipsec.c is not documented. <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…>:84: warning: Member pkt_pool (variable) of file odp_ipsec.c is not documented. <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…>:93: warning: Member out_pool (variable) of file odp_ipsec.c is not documented. <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…>:160: warning: Member ctx_pool (variable) of file odp_ipsec.c is not documented. <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…>:614: warning: argument 'ctx' of command @param is not found in the argument list of do_input_verify(odp_packet_t pkt, pkt_ctx_t *ctx ODP_UNUSED) <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…>:614: warning: The following parameters of do_input_verify(odp_packet_t pkt, pkt_ctx_t *ctx ODP_UNUSED) are not documented: parameter 'ODP_UNUSED' <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…>:1027: warning: argument 'arg' of command @param is not found in the argument list of pktio_thread(void *arg ODP_UNUSED) <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…>:1027: warning: The following parameters of pktio_thread(void *arg ODP_UNUSED) are not documented: parameter 'ODP_UNUSED' <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…>:60: warning: Member cipher (variable) of class ipsec_alg_t is not documented. <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…>:64: warning: Member u (variable) of class ipsec_alg_t is not documented. <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…>:43: warning: Member esp (variable) of class ipsec_cache_entry_t is not documented. <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…>:49: warning: Member ah (variable) of class ipsec_cache_entry_t is not documented. <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…>:57: warning: Member state (variable) of class ipsec_cache_entry_t is not documented. <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…>:22: warning: Member inq_def (variable) of class loopback_db_entry_t is not documented. <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…>:23: warning: Member outq_def (variable) of class loopback_db_entry_t is not documented. <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…>:24: warning: Member pkt_pool (variable) of class loopback_db_entry_t is not documented. <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…>:25: warning: Member mac[ODPH_ETHADDR_LEN] (variable) of class loopback_db_entry_t is not documented. <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…>:29: warning: Member intf[MAX_LOOPBACK] (variable) of class loopback_db_t is not documented. <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…>:34: warning: Member type (variable) of class odp_pktio_params_t is not documented. <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…>:35: warning: Member sock_params (variable) of class odp_pktio_params_t is not documented. <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…>:35: warning: Member input (variable) of class stream_db_entry_t is not documented. <https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…>:39: warning: Member output (variable) of class stream_db_entry_t is not documented. mv: cannot stat '<https://ci.linaro.org/jenkins/job/odp-publish/build_type=dox_html,label=doc…'>: No such file or directory Build step 'Execute shell' marked build as failure Skipping publisher since build result is FAILURE

9 years, 8 months