lng-ci November 2016

lng-ci@lists.linaro.org

3 participants
68 discussions

Build failed in Jenkins: Linaro Networking Group Kernel (linux-linaro-lng-v4.1-rt) » vexpress64,docker-jessie-amd64 #63-370e05d4

by ci_notify＠linaro.org

See <https://ci.linaro.org/jenkins/job/linux-lng-v4.1-rt/hwpack=vexpress64,label…> ------------------------------------------ [...truncated 3193 lines...] CC [M] net/bridge/br_sysfs_br.o LD [M] net/llc/llc.o CC [M] net/bridge/br_nf_core.o CC [M] net/ipv4/netfilter/nf_conntrack_proto_icmp.o CC [M] net/bridge/br_multicast.o CC [M] net/ipv6/netfilter/nf_conntrack_proto_icmpv6.o CC [M] net/bridge/br_mdb.o CC [M] net/ipv6/netfilter/nf_nat_l3proto_ipv6.o CC [M] net/bridge/br_netfilter.o CC [M] drivers/block/nbd.o CC [M] net/ipv6/netfilter/nf_nat_proto_icmpv6.o CC [M] net/bridge/netfilter/ebtables.o CC [M] net/ipv4/netfilter/nf_nat_l3proto_ipv4.o CC [M] net/ipv4/netfilter/nf_nat_proto_icmp.o CC [M] net/ipv6/netfilter/nf_defrag_ipv6_hooks.o CC [M] net/ipv6/netfilter/nf_conntrack_reasm.o LD [M] net/bridge/bridge.o CC [M] net/openvswitch/datapath.o CC [M] net/ipv6/netfilter/nf_log_ipv6.o CC [M] net/bridge/netfilter/ebtable_filter.o CC [M] net/netfilter/nf_conntrack_expect.o CC [M] net/ipv6/netfilter/nf_reject_ipv6.o CC [M] net/ipv6/netfilter/ip6t_REJECT.o CC [M] net/ipv4/netfilter/nf_defrag_ipv4.o LD [M] net/ipv6/netfilter/nf_conntrack_ipv6.o LD [M] net/ipv6/netfilter/nf_nat_ipv6.o LD [M] net/ipv6/netfilter/nf_defrag_ipv6.o CC [M] net/ipv4/netfilter/nf_log_ipv4.o CC [M] net/ipv4/netfilter/nf_reject_ipv4.o CC [M] net/openvswitch/dp_notify.o CC [M] net/bridge/netfilter/ebtable_nat.o CC [M] net/bridge/netfilter/ebt_mark.o CC [M] net/ipv4/netfilter/ip_tables.o CC [M] net/openvswitch/flow.o CC [M] net/netfilter/nf_conntrack_helper.o CC [M] net/ipv4/netfilter/iptable_mangle.o CC [M] net/ipv4/netfilter/iptable_filter.o CC [M] net/ipv4/netfilter/iptable_security.o CC [M] net/ipv4/netfilter/ipt_REJECT.o LD [M] net/ipv4/netfilter/nf_conntrack_ipv4.o LD [M] net/ipv4/netfilter/nf_nat_ipv4.o CC [M] net/openvswitch/flow_netlink.o CC [M] drivers/misc/hwlat_detector.o CC [M] net/openvswitch/flow_table.o CC [M] net/openvswitch/vport.o CC [M] net/netfilter/nf_conntrack_proto.o CC [M] net/openvswitch/vport-internal_dev.o CC [M] net/netfilter/nf_conntrack_l3proto_generic.o CC [M] drivers/uio/uio.o CC [M] net/openvswitch/vport-netdev.o CC [M] net/netfilter/nf_conntrack_proto_generic.o CC [M] net/netfilter/nf_conntrack_proto_udp.o CC [M] net/netfilter/nf_conntrack_proto_tcp.o CC [M] net/netfilter/nf_conntrack_extend.o CC [M] net/openvswitch/vport-gre.o CC [M] net/netfilter/nf_conntrack_acct.o CC [M] net/netfilter/nf_conntrack_netlink.o CC [M] net/netfilter/nf_conntrack_seqadj.o CC [M] net/netfilter/nf_log_common.o CC [M] net/netfilter/nf_nat_core.o CC [M] net/netfilter/nf_nat_proto_unknown.o CC [M] net/netfilter/nf_nat_proto_common.o CC [M] net/netfilter/nf_nat_proto_udp.o CC [M] net/netfilter/nf_nat_helper.o CC [M] net/netfilter/nf_nat_proto_tcp.o CC [M] net/netfilter/nf_nat_redirect.o LD [M] net/openvswitch/openvswitch.o CC [M] net/netfilter/x_tables.o CC [M] net/netfilter/xt_tcpudp.o CC [M] net/netfilter/xt_mark.o CC [M] net/netfilter/xt_connmark.o CC [M] net/netfilter/xt_CHECKSUM.o CC [M] net/netfilter/xt_CONNSECMARK.o CC [M] net/netfilter/xt_LOG.o CC [M] net/netfilter/xt_REDIRECT.o CC [M] net/netfilter/xt_conntrack.o CC [M] net/netfilter/xt_SECMARK.o CC [M] net/netfilter/xt_limit.o CC [M] net/netfilter/xt_multiport.o CC [M] net/netfilter/xt_state.o LD [M] net/netfilter/nf_nat.o CC [M] net/netfilter/xt_mac.o LD [M] net/netfilter/nf_conntrack.o Building modules, stage 2. MODPOST 59 modules CC drivers/block/nbd.mod.o CC drivers/misc/hwlat_detector.mod.o CC drivers/uio/uio.mod.o CC kernel/rcu/rcutorture.mod.o CC kernel/torture.mod.o CC lib/libcrc32c.mod.o CC net/802/p8022.mod.o CC net/802/psnap.mod.o CC net/bridge/br_netfilter.mod.o CC net/bridge/bridge.mod.o CC net/bridge/netfilter/ebt_mark.mod.o CC net/bridge/netfilter/ebtables.mod.o CC net/bridge/netfilter/ebtable_nat.mod.o CC net/802/stp.mod.o CC net/ipv4/netfilter/ip_tables.mod.o CC net/bridge/netfilter/ebtable_filter.mod.o CC net/ipv4/netfilter/ipt_REJECT.mod.o CC net/ipv4/netfilter/iptable_filter.mod.o CC net/ipv4/netfilter/iptable_mangle.mod.o CC net/ipv4/netfilter/iptable_security.mod.o CC net/ipv4/netfilter/nf_conntrack_ipv4.mod.o CC net/ipv4/netfilter/nf_defrag_ipv4.mod.o CC net/ipv4/netfilter/nf_log_ipv4.mod.o CC net/ipv4/netfilter/nf_nat_ipv4.mod.o CC net/ipv4/netfilter/nf_reject_ipv4.mod.o CC net/ipv6/netfilter/ip6_tables.mod.o CC net/ipv6/netfilter/ip6t_REJECT.mod.o CC net/ipv6/netfilter/ip6table_filter.mod.o CC net/ipv6/netfilter/ip6table_mangle.mod.o CC net/ipv6/netfilter/nf_conntrack_ipv6.mod.o CC net/ipv6/netfilter/nf_defrag_ipv6.mod.o CC net/ipv6/netfilter/nf_log_ipv6.mod.o CC net/ipv6/netfilter/nf_nat_ipv6.mod.o CC net/ipv6/netfilter/nf_reject_ipv6.mod.o CC net/llc/llc.mod.o CC net/mpls/mpls_gso.mod.o CC net/netfilter/nf_conntrack.mod.o CC net/netfilter/nf_conntrack_netlink.mod.o CC net/netfilter/nf_log_common.mod.o CC net/netfilter/nf_nat.mod.o CC net/netfilter/nf_nat_redirect.mod.o CC net/netfilter/nfnetlink.mod.o CC net/netfilter/nfnetlink_log.mod.o CC net/netfilter/x_tables.mod.o CC net/netfilter/xt_CHECKSUM.mod.o CC net/netfilter/xt_CONNSECMARK.mod.o CC net/netfilter/xt_LOG.mod.o CC net/netfilter/xt_REDIRECT.mod.o CC net/netfilter/xt_connmark.mod.o CC net/netfilter/xt_SECMARK.mod.o CC net/netfilter/xt_conntrack.mod.o CC net/netfilter/xt_limit.mod.o CC net/netfilter/xt_mac.mod.o CC net/netfilter/xt_mark.mod.o CC net/netfilter/xt_multiport.mod.o CC net/netfilter/xt_state.mod.o CC net/netfilter/xt_tcpudp.mod.o CC net/openvswitch/openvswitch.mod.o CC net/openvswitch/vport-gre.mod.o LD [M] drivers/block/nbd.ko LD [M] drivers/misc/hwlat_detector.ko LD [M] drivers/uio/uio.ko LD [M] kernel/rcu/rcutorture.ko LD [M] kernel/torture.ko LD [M] lib/libcrc32c.ko LD [M] net/802/p8022.ko LD [M] net/802/psnap.ko LD [M] net/802/stp.ko LD [M] net/bridge/netfilter/ebtable_filter.ko LD [M] net/bridge/netfilter/ebtables.ko LD [M] net/bridge/netfilter/ebtable_nat.ko LD [M] net/bridge/bridge.ko LD [M] net/ipv4/netfilter/ip_tables.ko LD [M] net/bridge/br_netfilter.ko LD [M] net/bridge/netfilter/ebt_mark.ko LD [M] net/ipv4/netfilter/ipt_REJECT.ko LD [M] net/ipv4/netfilter/iptable_mangle.ko LD [M] net/ipv4/netfilter/iptable_security.ko LD [M] net/ipv4/netfilter/iptable_filter.ko LD [M] net/ipv4/netfilter/nf_conntrack_ipv4.ko LD [M] net/ipv4/netfilter/nf_defrag_ipv4.ko LD [M] net/ipv4/netfilter/nf_log_ipv4.ko LD [M] net/ipv4/netfilter/nf_nat_ipv4.ko LD [M] net/ipv4/netfilter/nf_reject_ipv4.ko LD [M] net/ipv6/netfilter/ip6_tables.ko LD [M] net/ipv6/netfilter/ip6t_REJECT.ko LD [M] net/ipv6/netfilter/ip6table_filter.ko LD [M] net/ipv6/netfilter/ip6table_mangle.ko LD [M] net/ipv6/netfilter/nf_conntrack_ipv6.ko LD [M] net/ipv6/netfilter/nf_defrag_ipv6.ko LD [M] net/ipv6/netfilter/nf_log_ipv6.ko LD [M] net/ipv6/netfilter/nf_nat_ipv6.ko LD [M] net/ipv6/netfilter/nf_reject_ipv6.ko LD [M] net/llc/llc.ko LD [M] net/netfilter/nf_conntrack.ko LD [M] net/netfilter/nf_conntrack_netlink.ko LD [M] net/mpls/mpls_gso.ko LD [M] net/netfilter/nf_log_common.ko LD [M] net/netfilter/nf_nat.ko LD [M] net/netfilter/nf_nat_redirect.ko LD [M] net/netfilter/nfnetlink.ko LD [M] net/netfilter/nfnetlink_log.ko LD [M] net/netfilter/x_tables.ko LD [M] net/netfilter/xt_CHECKSUM.ko LD [M] net/netfilter/xt_CONNSECMARK.ko LD [M] net/netfilter/xt_LOG.ko LD [M] net/netfilter/xt_REDIRECT.ko LD [M] net/netfilter/xt_SECMARK.ko LD [M] net/netfilter/xt_connmark.ko LD [M] net/netfilter/xt_conntrack.ko LD [M] net/netfilter/xt_limit.ko LD [M] net/netfilter/xt_mac.ko LD [M] net/netfilter/xt_mark.ko LD [M] net/netfilter/xt_multiport.ko LD [M] net/netfilter/xt_state.ko LD [M] net/netfilter/xt_tcpudp.ko LD [M] net/openvswitch/openvswitch.ko LD [M] net/openvswitch/vport-gre.ko make[1]: Leaving directory '<https://ci.linaro.org/jenkins/job/linux-lng-v4.1-rt/hwpack=vexpress64,label…'> + '[' true = true ']' + echo 'Building with DTBS support...' Building with DTBS support... + eval 'make KERNELRELEASE=${kernel_release} O=${pkg_dir} dtbs' ++ make KERNELRELEASE=4.1.14-linaro-vexpress64 O=builddir-4.1.14-linaro-vexpress64 dtbs make[1]: Entering directory '<https://ci.linaro.org/jenkins/job/linux-lng-v4.1-rt/hwpack=vexpress64,label…'> CHK include/config/kernel.release Using .. as source for kernel GEN ./Makefile CHK include/generated/uapi/linux/version.h CHK include/generated/utsrelease.h CHK include/generated/bounds.h CHK include/generated/asm-offsets.h CALL ../scripts/checksyscalls.sh DTC arch/arm64/boot/dts/amd/amd-overdrive.dtb DTC arch/arm64/boot/dts/apm/apm-mustang.dtb DTC arch/arm64/boot/dts/arm/foundation-v8.dtb DTC arch/arm64/boot/dts/arm/juno.dtb DTC arch/arm64/boot/dts/arm/juno-r1.dtb DTC arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dtb DTC arch/arm64/boot/dts/cavium/thunder-88xx.dtb DTC arch/arm64/boot/dts/exynos/exynos7-espresso.dtb DTC arch/arm64/boot/dts/freescale/fsl-ls2085a-simu.dtb DTC arch/arm64/boot/dts/mediatek/mt8173-evb.dtb DTC arch/arm64/boot/dts/qcom/apq8016-sbc.dtb DTC arch/arm64/boot/dts/qcom/msm8916-mtp.dtb DTC arch/arm64/boot/dts/sprd/sc9836-openphone.dtb DTC arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb make[1]: Leaving directory '<https://ci.linaro.org/jenkins/job/linux-lng-v4.1-rt/hwpack=vexpress64,label…'> + '[' true = true -a arm64 = arm64 ']' + echo 'Building boot wrapper' Building boot wrapper + rm -rf builddir-4.1.14-linaro-vexpress64/boot-wrapper + git clone git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/boot-wrapper-aarch64… builddir-4.1.14-linaro-vexpress64/boot-wrapper Cloning into 'builddir-4.1.14-linaro-vexpress64/boot-wrapper'... fatal: remote error: access denied or repository not exported: /pub/scm/linux/kernel/git/cmarinas/boot-wrapper-aarch64.git + cleanup_exit + cd <https://ci.linaro.org/jenkins/job/linux-lng-v4.1-rt/hwpack=vexpress64,label…> + rm -rf builddir-4.1.14-linaro-vexpress64 + rm -f 'hwpack_linaro-*' '*.deb' Build step 'Execute shell' marked build as failure Set build name. New build name is '#63-370e05d4' Variable with name 'BUILD_DISPLAY_NAME' already exists, current value: '#63-370e05d4', new value: '#63-370e05d4' Skipping publisher since build result is FAILURE

6 years, 11 months

Build failed in Jenkins: Linaro Networking Group Kernel - pre-merge (linux-linaro-lng-v4.1-test) » arndale-be,docker-jessie-amd64 #78-e86b33ca

by ci_notify＠linaro.org

https://ci.linaro.org/jenkins/job/linux-lng-v4.1-pre-merge/hwpack=arndale-b… [...truncated 8868 lines...] + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/tegra124-venice2.dtb out/dtbs/tegra124-venice2.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/stih418-b2199.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/stih418-b2199.dtb out/dtbs/stih418-b2199.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/sun7i-a20-pcduino3.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/sun7i-a20-pcduino3.dtb out/dtbs/sun7i-a20-pcduino3.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/tegra30-colibri-eval-v3.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/tegra30-colibri-eval-v3.dtb out/dtbs/tegra30-colibri-eval-v3.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/imx6q-gw52xx.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/imx6q-gw52xx.dtb out/dtbs/imx6q-gw52xx.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dtb out/dtbs/armada-xp-openblocks-ax3-4.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/hisi-x5hd2-dkb.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/hisi-x5hd2-dkb.dtb out/dtbs/hisi-x5hd2-dkb.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/r8a7778-bockw.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/r8a7778-bockw.dtb out/dtbs/r8a7778-bockw.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dtb out/dtbs/bcm47081-asus-rt-n18u.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/sun4i-a10-mini-xplus.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/sun4i-a10-mini-xplus.dtb out/dtbs/sun4i-a10-mini-xplus.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/imx6q-rex-pro.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/imx6q-rex-pro.dtb out/dtbs/imx6q-rex-pro.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/exynos5250-smdk5250.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/exynos5250-smdk5250.dtb out/dtbs/exynos5250-smdk5250.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/am335x-evmsk.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/am335x-evmsk.dtb out/dtbs/am335x-evmsk.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/imx6dl-gw552x.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/imx6dl-gw552x.dtb out/dtbs/imx6dl-gw552x.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dtb out/dtbs/imx6q-tx6q-1020-comtft.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/rk3288-evb-rk808.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/rk3288-evb-rk808.dtb out/dtbs/rk3288-evb-rk808.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/zynq-zc706.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/zynq-zc706.dtb out/dtbs/zynq-zc706.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/tegra124-jetson-tk1.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/tegra124-jetson-tk1.dtb out/dtbs/tegra124-jetson-tk1.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/am335x-pepper.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/am335x-pepper.dtb out/dtbs/am335x-pepper.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/am3517-craneboard.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/am3517-craneboard.dtb out/dtbs/am3517-craneboard.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/armada-370-synology-ds213j.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/armada-370-synology-ds213j.dtb out/dtbs/armada-370-synology-ds213j.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/armada-388-gp.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/armada-388-gp.dtb out/dtbs/armada-388-gp.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dtb out/dtbs/sun7i-a20-olinuxino-micro.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/stih407-b2120.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/stih407-b2120.dtb out/dtbs/stih407-b2120.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/omap3430-sdp.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/omap3430-sdp.dtb out/dtbs/omap3430-sdp.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/omap5-cm-t54.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/omap5-cm-t54.dtb out/dtbs/omap5-cm-t54.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/omap4-panda-a4.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/omap4-panda-a4.dtb out/dtbs/omap4-panda-a4.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/imx6q-gw5400-a.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/imx6q-gw5400-a.dtb out/dtbs/imx6q-gw5400-a.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/ste-snowball.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/ste-snowball.dtb out/dtbs/ste-snowball.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/ste-hrefprev60-stuib.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/ste-hrefprev60-stuib.dtb out/dtbs/ste-hrefprev60-stuib.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/omap3-cm-t3530.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/omap3-cm-t3530.dtb out/dtbs/omap3-cm-t3530.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/armada-xp-matrix.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/armada-xp-matrix.dtb out/dtbs/armada-xp-matrix.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/omap3-pandora-1ghz.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/omap3-pandora-1ghz.dtb out/dtbs/omap3-pandora-1ghz.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/omap3-beagle-xm.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/omap3-beagle-xm.dtb out/dtbs/omap3-beagle-xm.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/qcom-msm8660-surf.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/qcom-msm8660-surf.dtb out/dtbs/qcom-msm8660-surf.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/k2l-evm.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/k2l-evm.dtb out/dtbs/k2l-evm.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/tegra114-dalmore.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/tegra114-dalmore.dtb out/dtbs/tegra114-dalmore.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dtb out/dtbs/bcm4708-luxul-xwc-1000.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dtb out/dtbs/imx6dl-dfi-fs700-m60.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/rk3066a-bqcurie2.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/rk3066a-bqcurie2.dtb out/dtbs/rk3066a-bqcurie2.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/imx6q-hummingboard.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/imx6q-hummingboard.dtb out/dtbs/imx6q-hummingboard.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/bcm958300k.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/bcm958300k.dtb out/dtbs/bcm958300k.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/exynos5420-arndale-octa.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/exynos5420-arndale-octa.dtb out/dtbs/exynos5420-arndale-octa.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/r8a7740-armadillo800eva.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/r8a7740-armadillo800eva.dtb out/dtbs/r8a7740-armadillo800eva.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/omap3-overo-palo43.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/omap3-overo-palo43.dtb out/dtbs/omap3-overo-palo43.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/imx53-qsrb.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/imx53-qsrb.dtb out/dtbs/imx53-qsrb.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/imx53-m53evk.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/imx53-m53evk.dtb out/dtbs/imx53-m53evk.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dtb out/dtbs/sun5i-a10s-r7-tv-dongle.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dtb out/dtbs/sun5i-a10s-olinuxino-micro.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/dra72-evm.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/dra72-evm.dtb out/dtbs/dra72-evm.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/sun4i-a10-cubieboard.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/sun4i-a10-cubieboard.dtb out/dtbs/sun4i-a10-cubieboard.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/am437x-idk-evm.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/am437x-idk-evm.dtb out/dtbs/am437x-idk-evm.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/imx6q-wandboard-revb1.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/imx6q-wandboard-revb1.dtb out/dtbs/imx6q-wandboard-revb1.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/vf500-colibri-eval-v3.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/vf500-colibri-eval-v3.dtb out/dtbs/vf500-colibri-eval-v3.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/ste-ccu9540.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/ste-ccu9540.dtb out/dtbs/ste-ccu9540.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/exynos4412-trats2.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/exynos4412-trats2.dtb out/dtbs/exynos4412-trats2.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/mt6589-aquaris5.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/mt6589-aquaris5.dtb out/dtbs/mt6589-aquaris5.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/omap3-igep0030.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/omap3-igep0030.dtb out/dtbs/omap3-igep0030.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/rk3288-firefly-beta.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/rk3288-firefly-beta.dtb out/dtbs/rk3288-firefly-beta.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/am335x-base0033.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/am335x-base0033.dtb out/dtbs/am335x-base0033.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/bcm958305k.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/bcm958305k.dtb out/dtbs/bcm958305k.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dtb out/dtbs/sun7i-a20-olinuxino-lime2.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/omap3-ha.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/omap3-ha.dtb out/dtbs/omap3-ha.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/tegra20-medcom-wide.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/tegra20-medcom-wide.dtb out/dtbs/tegra20-medcom-wide.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/mt8135-evbp1.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/mt8135-evbp1.dtb out/dtbs/mt8135-evbp1.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/exynos5440-sd5v1.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/exynos5440-sd5v1.dtb out/dtbs/exynos5440-sd5v1.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/sun5i-a10s-mk802.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/sun5i-a10s-mk802.dtb out/dtbs/sun5i-a10s-mk802.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dtb out/dtbs/omap3-overo-storm-chestnut43.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dtb out/dtbs/sun5i-a13-olinuxino-micro.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/r8a7794-alt.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/r8a7794-alt.dtb out/dtbs/r8a7794-alt.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/sun7i-a20-cubieboard2.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/sun7i-a20-cubieboard2.dtb out/dtbs/sun7i-a20-cubieboard2.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/highbank.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/highbank.dtb out/dtbs/highbank.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/qcom-apq8064-ifc6410.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/qcom-apq8064-ifc6410.dtb out/dtbs/qcom-apq8064-ifc6410.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/hip04-d01.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/hip04-d01.dtb out/dtbs/hip04-d01.dtb + for dtb in '`find ${pkg_dir}/arch/${ARCH}/boot/dts/ -type f -name '\''*.dtb'\''`' ++ basename builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/imx6q-gw53xx.dtb + install -D -p -m0644 builddir-4.1.15-linaro-arndale-be/arch/arm/boot/dts/imx6q-gw53xx.dtb out/dtbs/imx6q-gw53xx.dtb ++ date +%s + END=1480331873 + EXECUTION_TIME_IN_SEC=446 + '[' 0 -eq 1 ']' + '[' -e scripts/package/builddeb.orig ']' + echo 'Copying back the builddeb that was replaced..' Copying back the builddeb that was replaced.. + cp scripts/package/builddeb.orig scripts/package/builddeb + mkdir -p out + cp 'linux*orig.tar.gz' out/ cp: cannot stat 'linux*orig.tar.gz': No such file or directory + cleanup_exit + cd <https://ci.linaro.org/jenkins/job/linux-lng-v4.1-pre-merge/hwpack=arndale-b…> + rm -rf builddir-4.1.15-linaro-arndale-be + rm -f 'hwpack_linaro-*' linux-headers-4.1.15-linaro-arndale-be_4.1.15-linaro-arndale-be-1_armhf.deb linux-image-4.1.15-linaro-arndale-be-dbg_4.1.15-linaro-arndale-be-1_armhf.deb linux-image-4.1.15-linaro-arndale-be_4.1.15-linaro-arndale-be-1_armhf.deb linux-libc-dev_4.1.15-linaro-arndale-be-1_armhf.deb Build step 'Execute shell' marked build as failure Set build name. [YAD-PLUGIN] Injecting DOCKER_CONTAINER_ID variable. [YAD-PLUGIN] Injecting JENKINS_CLOUD_ID variable. [YAD-PLUGIN] DOCKER_HOST variable. New build name is '#78-e86b33ca' Variable with name 'BUILD_DISPLAY_NAME' already exists, current value: '#78-e86b33ca', new value: '#78-e86b33ca' Skipping publisher since build result is FAILURE [YAD-PLUGIN] Injecting DOCKER_CONTAINER_ID variable. [YAD-PLUGIN] Injecting JENKINS_CLOUD_ID variable. [YAD-PLUGIN] DOCKER_HOST variable.

7 years, 2 months

Build failed in Jenkins: Linaro Networking Group Kernel - pre-merge (linux-linaro-lng-v4.4-test) » vexpress64,docker-jessie-amd64 #42-72db418a

by ci_notify＠linaro.org

See <https://ci.linaro.org/jenkins/job/linux-lng-v4.4-pre-merge/hwpack=vexpress6…> ------------------------------------------ [...truncated 3269 lines...] CC [M] net/ipv6/udplite.o CC [M] net/netfilter/nf_nat_proto_common.o CC [M] net/netfilter/nf_nat_proto_udp.o CC [M] net/ipv6/raw.o CC [M] net/netfilter/nf_nat_proto_tcp.o CC [M] net/ipv6/icmp.o CC [M] net/netfilter/nf_nat_helper.o CC [M] net/ipv6/mcast.o LD [M] net/openvswitch/openvswitch.o CC [M] net/ipv6/reassembly.o CC [M] net/netfilter/nf_nat_redirect.o CC [M] net/netfilter/x_tables.o CC [M] net/ipv6/tcp_ipv6.o CC [M] net/ipv6/ping.o CC [M] net/ipv6/exthdrs.o CC [M] net/netfilter/xt_mark.o CC [M] net/netfilter/xt_tcpudp.o CC [M] net/netfilter/xt_connmark.o CC [M] net/ipv6/datagram.o CC [M] net/netfilter/xt_CHECKSUM.o CC [M] net/ipv6/inet6_connection_sock.o CC [M] net/netfilter/xt_LOG.o CC [M] net/ipv6/xfrm6_state.o CC [M] net/ipv6/xfrm6_policy.o CC [M] net/ipv6/ip6_flowlabel.o CC [M] net/netfilter/xt_REDIRECT.o CC [M] net/ipv6/sysctl_net_ipv6.o CC [M] net/netfilter/xt_mac.o CC [M] net/netfilter/xt_limit.o CC [M] net/netfilter/xt_conntrack.o CC [M] net/netfilter/xt_state.o CC [M] net/netfilter/xt_multiport.o CC [M] net/ipv6/xfrm6_input.o CC [M] net/ipv6/xfrm6_output.o CC [M] net/ipv6/xfrm6_protocol.o LD [M] net/netfilter/nf_conntrack.o LD [M] net/netfilter/nf_nat.o CC [M] net/ipv6/proc.o CC [M] net/ipv6/netfilter.o CC [M] net/ipv6/xfrm6_mode_beet.o CC [M] net/ipv6/syncookies.o CC [M] net/ipv6/xfrm6_mode_tunnel.o CC [M] net/ipv6/xfrm6_mode_transport.o CC [M] net/ipv6/sit.o CC [M] net/ipv6/netfilter/nf_nat_l3proto_ipv6.o CC [M] net/ipv6/netfilter/nf_conntrack_proto_icmpv6.o CC [M] net/ipv6/netfilter/ip6table_mangle.o CC [M] net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.o CC [M] net/ipv6/netfilter/ip6_tables.o CC [M] net/ipv6/netfilter/ip6table_filter.o CC [M] net/ipv6/netfilter/nf_nat_proto_icmpv6.o CC [M] net/ipv6/netfilter/nf_defrag_ipv6_hooks.o CC [M] net/ipv6/netfilter/nf_conntrack_reasm.o CC [M] net/ipv6/netfilter/nf_log_ipv6.o CC [M] net/ipv6/netfilter/nf_reject_ipv6.o CC [M] net/ipv6/netfilter/ip6t_REJECT.o LD [M] net/ipv6/netfilter/nf_nat_ipv6.o LD [M] net/ipv6/netfilter/nf_conntrack_ipv6.o LD [M] net/ipv6/ipv6.o LD [M] net/ipv6/netfilter/nf_defrag_ipv6.o Building modules, stage 2. MODPOST 64 modules CC crypto/drbg.mod.o CC crypto/echainiv.mod.o CC crypto/hmac.mod.o CC crypto/jitterentropy_rng.mod.o CC crypto/sha256_generic.mod.o CC drivers/block/nbd.mod.o CC lib/libcrc32c.mod.o CC net/802/p8022.mod.o CC net/802/stp.mod.o CC drivers/uio/uio.mod.o CC net/bridge/netfilter/ebtable_nat.mod.o CC net/bridge/bridge.mod.o CC net/802/psnap.mod.o CC net/bridge/netfilter/ebt_mark.mod.o CC net/bridge/br_netfilter.mod.o CC net/bridge/netfilter/ebtable_filter.mod.o CC net/bridge/netfilter/ebtables.mod.o CC net/ipv4/ip_tunnel.mod.o CC net/ipv4/netfilter/ip_tables.mod.o CC net/ipv4/netfilter/ipt_REJECT.mod.o CC net/ipv4/netfilter/iptable_filter.mod.o CC net/ipv4/netfilter/iptable_mangle.mod.o CC net/ipv4/netfilter/nf_conntrack_ipv4.mod.o CC net/ipv4/netfilter/nf_nat_ipv4.mod.o CC net/ipv4/netfilter/nf_log_ipv4.mod.o CC net/ipv4/netfilter/nf_defrag_ipv4.mod.o CC net/ipv6/netfilter/ip6table_filter.mod.o CC net/ipv4/netfilter/nf_reject_ipv4.mod.o CC net/ipv6/netfilter/ip6t_REJECT.mod.o CC net/ipv4/tunnel4.mod.o CC net/ipv6/ipv6.mod.o CC net/ipv6/netfilter/ip6_tables.mod.o CC net/ipv6/netfilter/nf_defrag_ipv6.mod.o CC net/ipv6/netfilter/nf_conntrack_ipv6.mod.o CC net/ipv6/netfilter/ip6table_mangle.mod.o CC net/ipv6/netfilter/nf_log_ipv6.mod.o CC net/ipv6/netfilter/nf_nat_ipv6.mod.o CC net/ipv6/netfilter/nf_reject_ipv6.mod.o CC net/ipv6/sit.mod.o CC net/ipv6/xfrm6_mode_beet.mod.o CC net/ipv6/xfrm6_mode_tunnel.mod.o CC net/ipv6/xfrm6_mode_transport.mod.o CC net/netfilter/nf_nat.mod.o CC net/netfilter/nf_conntrack_netlink.mod.o CC net/llc/llc.mod.o CC net/mpls/mpls_gso.mod.o CC net/netfilter/nf_conntrack.mod.o CC net/netfilter/nf_log_common.mod.o CC net/netfilter/nfnetlink.mod.o CC net/netfilter/nf_nat_redirect.mod.o CC net/netfilter/nfnetlink_log.mod.o CC net/netfilter/x_tables.mod.o CC net/netfilter/xt_CHECKSUM.mod.o CC net/netfilter/xt_LOG.mod.o CC net/netfilter/xt_REDIRECT.mod.o CC net/netfilter/xt_connmark.mod.o CC net/netfilter/xt_conntrack.mod.o CC net/netfilter/xt_mac.mod.o CC net/netfilter/xt_limit.mod.o CC net/netfilter/xt_multiport.mod.o CC net/openvswitch/openvswitch.mod.o CC net/netfilter/xt_state.mod.o CC net/netfilter/xt_tcpudp.mod.o CC net/netfilter/xt_mark.mod.o LD [M] crypto/echainiv.ko LD [M] crypto/hmac.ko LD [M] crypto/drbg.ko LD [M] crypto/jitterentropy_rng.ko LD [M] crypto/sha256_generic.ko LD [M] drivers/block/nbd.ko LD [M] net/bridge/br_netfilter.ko LD [M] net/802/stp.ko LD [M] lib/libcrc32c.ko LD [M] drivers/uio/uio.ko LD [M] net/bridge/netfilter/ebtable_filter.ko LD [M] net/802/p8022.ko LD [M] net/bridge/netfilter/ebtables.ko LD [M] net/ipv4/netfilter/ip_tables.ko LD [M] net/ipv4/ip_tunnel.ko LD [M] net/bridge/netfilter/ebt_mark.ko LD [M] net/bridge/bridge.ko LD [M] net/802/psnap.ko LD [M] net/bridge/netfilter/ebtable_nat.ko LD [M] net/ipv4/netfilter/iptable_mangle.ko LD [M] net/ipv4/netfilter/ipt_REJECT.ko LD [M] net/ipv4/netfilter/nf_conntrack_ipv4.ko LD [M] net/ipv4/netfilter/iptable_filter.ko LD [M] net/ipv4/netfilter/nf_nat_ipv4.ko LD [M] net/ipv4/netfilter/nf_log_ipv4.ko LD [M] net/ipv4/netfilter/nf_defrag_ipv4.ko LD [M] net/ipv6/netfilter/ip6_tables.ko LD [M] net/ipv4/netfilter/nf_reject_ipv4.ko LD [M] net/ipv6/netfilter/nf_conntrack_ipv6.ko LD [M] net/ipv6/netfilter/ip6t_REJECT.ko LD [M] net/ipv6/netfilter/ip6table_filter.ko LD [M] net/ipv6/netfilter/nf_log_ipv6.ko LD [M] net/ipv4/tunnel4.ko LD [M] net/ipv6/netfilter/nf_defrag_ipv6.ko LD [M] net/ipv6/netfilter/ip6table_mangle.ko LD [M] net/ipv6/ipv6.ko LD [M] net/ipv6/xfrm6_mode_beet.ko LD [M] net/ipv6/netfilter/nf_reject_ipv6.ko LD [M] net/ipv6/netfilter/nf_nat_ipv6.ko LD [M] net/ipv6/sit.ko LD [M] net/netfilter/nf_conntrack.ko LD [M] net/netfilter/nf_nat.ko LD [M] net/mpls/mpls_gso.ko LD [M] net/llc/llc.ko LD [M] net/netfilter/nf_log_common.ko LD [M] net/netfilter/nf_conntrack_netlink.ko LD [M] net/ipv6/xfrm6_mode_tunnel.ko LD [M] net/ipv6/xfrm6_mode_transport.ko LD [M] net/netfilter/x_tables.ko LD [M] net/netfilter/nf_nat_redirect.ko LD [M] net/netfilter/nfnetlink.ko LD [M] net/netfilter/xt_LOG.ko LD [M] net/netfilter/nfnetlink_log.ko LD [M] net/netfilter/xt_connmark.ko LD [M] net/netfilter/xt_REDIRECT.ko LD [M] net/netfilter/xt_CHECKSUM.ko LD [M] net/netfilter/xt_multiport.ko LD [M] net/netfilter/xt_mac.ko LD [M] net/netfilter/xt_conntrack.ko LD [M] net/netfilter/xt_limit.ko LD [M] net/netfilter/xt_tcpudp.ko LD [M] net/netfilter/xt_state.ko LD [M] net/openvswitch/openvswitch.ko LD [M] net/netfilter/xt_mark.ko make[1]: Leaving directory '<https://ci.linaro.org/jenkins/job/linux-lng-v4.4-pre-merge/hwpack=vexpress6…'> + '[' true = true ']' + echo 'Building with DTBS support...' Building with DTBS support... + eval 'make KERNELRELEASE=${kernel_release} O=${pkg_dir} dtbs' ++ make KERNELRELEASE=4.4.14-linaro-vexpress64 O=builddir-4.4.14-linaro-vexpress64 dtbs make[1]: Entering directory '<https://ci.linaro.org/jenkins/job/linux-lng-v4.4-pre-merge/hwpack=vexpress6…'> CHK include/config/kernel.release Using .. as source for kernel GEN ./Makefile CHK include/generated/uapi/linux/version.h CHK include/generated/utsrelease.h CHK include/generated/bounds.h CHK include/generated/timeconst.h CHK include/generated/asm-offsets.h CALL ../scripts/checksyscalls.sh DTC arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dtb DTC arch/arm64/boot/dts/amd/amd-overdrive.dtb DTC arch/arm64/boot/dts/apm/apm-mustang.dtb DTC arch/arm64/boot/dts/apm/apm-merlin.dtb DTC arch/arm64/boot/dts/arm/foundation-v8.dtb DTC arch/arm64/boot/dts/arm/juno.dtb DTC arch/arm64/boot/dts/arm/juno-r1.dtb DTC arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dtb DTC arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dtb DTC arch/arm64/boot/dts/broadcom/ns2-svk.dtb DTC arch/arm64/boot/dts/cavium/thunder-88xx.dtb DTC arch/arm64/boot/dts/exynos/exynos7-espresso.dtb DTC arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dtb DTC arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dtb DTC arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dtb DTC arch/arm64/boot/dts/hisilicon/hi6220-hikey.dtb DTC arch/arm64/boot/dts/hisilicon/hip05-d02.dtb DTC arch/arm64/boot/dts/marvell/berlin4ct-dmp.dtb DTC arch/arm64/boot/dts/marvell/berlin4ct-stb.dtb DTC arch/arm64/boot/dts/mediatek/mt6795-evb.dtb DTC arch/arm64/boot/dts/mediatek/mt8173-evb.dtb DTC arch/arm64/boot/dts/qcom/apq8016-sbc.dtb DTC arch/arm64/boot/dts/qcom/msm8916-mtp.dtb DTC arch/arm64/boot/dts/rockchip/rk3368-r88.dtb DTC arch/arm64/boot/dts/sprd/sc9836-openphone.dtb DTC arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb make[1]: Leaving directory '<https://ci.linaro.org/jenkins/job/linux-lng-v4.4-pre-merge/hwpack=vexpress6…'> + '[' true = true -a arm64 = arm64 ']' + echo 'Building boot wrapper' Building boot wrapper + rm -rf builddir-4.4.14-linaro-vexpress64/boot-wrapper + git clone git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/boot-wrapper-aarch64… builddir-4.4.14-linaro-vexpress64/boot-wrapper Cloning into 'builddir-4.4.14-linaro-vexpress64/boot-wrapper'... fatal: remote error: access denied or repository not exported: /pub/scm/linux/kernel/git/cmarinas/boot-wrapper-aarch64.git + cleanup_exit + cd <https://ci.linaro.org/jenkins/job/linux-lng-v4.4-pre-merge/hwpack=vexpress6…> + rm -rf builddir-4.4.14-linaro-vexpress64 + rm -f 'hwpack_linaro-*' '*.deb' Build step 'Execute shell' marked build as failure Set build name. New build name is '#42-72db418a' Variable with name 'BUILD_DISPLAY_NAME' already exists, current value: '#42-72db418a', new value: '#42-72db418a' Skipping publisher since build result is FAILURE

7 years, 3 months

Build failed in Jenkins: ODP tool check » m32_on_64,docker-jessie-amd64 #600

by ci_notify＠linaro.org

See <https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=m32_on_64,label…> ------------------------------------------ [...truncated 1353 lines...] checking whether pthreads work with -kthread... no checking for the pthreads library -llthread... no checking whether pthreads work with -pthread... yes checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE checking if more special flags are required for pthreads... no checking for PTHREAD_PRIO_INHERIT... yes checking for EVP_EncryptInit in -lcrypto... yes checking openssl/des.h usability... yes checking openssl/des.h presence... yes checking for openssl/des.h... yes checking openssl/rand.h usability... yes checking openssl/rand.h presence... yes checking for openssl/rand.h... yes checking openssl/hmac.h usability... yes checking openssl/hmac.h presence... yes checking for openssl/hmac.h... yes checking openssl/evp.h usability... yes checking openssl/evp.h presence... yes checking for openssl/evp.h... yes checking pcap/pcap.h usability... yes checking pcap/pcap.h presence... yes checking for pcap/pcap.h... yes checking pcap/bpf.h usability... yes checking pcap/bpf.h presence... yes checking for pcap/bpf.h... yes checking for pcap_open_offline in -lpcap... no checking for doxygen... doxygen checking for asciidoctor... asciidoctor checking for mscgen... mscgen checking for CU_get_error in -lcunit... yes checking CUnit/Basic.h usability... yes checking CUnit/Basic.h presence... yes checking for CUnit/Basic.h... yes checking for doxygen... /usr/bin/doxygen checking for perl... /usr/bin/perl DX_FLAG_doc=1 DX_FLAG_html=1 checking for library containing timer_create... no checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating platform/linux-generic/Makefile config.status: creating platform/linux-generic/include/odp/api/plat/inlines.h config.status: creating test/linux-generic/Makefile config.status: creating test/linux-generic/validation/api/shmem/Makefile config.status: creating test/linux-generic/validation/api/pktio/Makefile config.status: creating test/linux-generic/pktio_ipc/Makefile config.status: creating test/linux-generic/ring/Makefile config.status: creating test/linux-generic/performance/Makefile config.status: creating doc/application-api-guide/Makefile config.status: creating doc/helper-guide/Makefile config.status: creating doc/implementers-guide/Makefile config.status: creating doc/Makefile config.status: creating doc/platform-api-guide/Makefile config.status: creating doc/process-guide/Makefile config.status: creating doc/users-guide/Makefile config.status: creating example/classifier/Makefile config.status: creating example/generator/Makefile config.status: creating example/hello/Makefile config.status: creating example/ipsec/Makefile config.status: creating example/l2fwd_simple/Makefile config.status: creating example/l3fwd/Makefile config.status: creating example/packet/Makefile config.status: creating example/switch/Makefile config.status: creating example/time/Makefile config.status: creating example/timer/Makefile config.status: creating example/traffic_mgmt/Makefile config.status: creating example/Makefile config.status: creating test/common_plat/Makefile config.status: creating test/common_plat/common/Makefile config.status: creating test/common_plat/miscellaneous/Makefile config.status: creating test/common_plat/performance/Makefile config.status: creating test/common_plat/validation/Makefile config.status: creating test/common_plat/validation/api/atomic/Makefile config.status: creating test/common_plat/validation/api/barrier/Makefile config.status: creating test/common_plat/validation/api/buffer/Makefile config.status: creating test/common_plat/validation/api/classification/Makefile config.status: creating test/common_plat/validation/api/cpumask/Makefile config.status: creating test/common_plat/validation/api/crypto/Makefile config.status: creating test/common_plat/validation/api/errno/Makefile config.status: creating test/common_plat/validation/api/hash/Makefile config.status: creating test/common_plat/validation/api/init/Makefile config.status: creating test/common_plat/validation/api/lock/Makefile config.status: creating test/common_plat/validation/api/Makefile config.status: creating test/common_plat/validation/api/packet/Makefile config.status: creating test/common_plat/validation/api/pktio/Makefile config.status: creating test/common_plat/validation/api/pool/Makefile config.status: creating test/common_plat/validation/api/queue/Makefile config.status: creating test/common_plat/validation/api/random/Makefile config.status: creating test/common_plat/validation/api/scheduler/Makefile config.status: creating test/common_plat/validation/api/shmem/Makefile config.status: creating test/common_plat/validation/api/std_clib/Makefile config.status: creating test/common_plat/validation/api/system/Makefile config.status: creating test/common_plat/validation/api/thread/Makefile config.status: creating test/common_plat/validation/api/time/Makefile config.status: creating test/common_plat/validation/api/timer/Makefile config.status: creating test/common_plat/validation/api/traffic_mngr/Makefile config.status: creating test/Makefile config.status: creating Makefile config.status: creating helper/Makefile config.status: creating helper/test/Makefile config.status: creating pkgconfig/libodp-linux.pc config.status: creating pkgconfig/libodphelper-linux.pc config.status: creating scripts/Makefile config.status: creating helper/config.h config.status: executing depfiles commands config.status: executing libtool commands opendataplane 1.10.1.0.git126.ga8e5a8f ODP Library version: 110:0:1 Helper Library version: 110:0:1 implementation_name: odp-linux ARCH_DIR x86 with_platform: linux-generic prefix: <https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=m32_on_64,label…> sysconfdir: ${prefix}/etc libdir: ${exec_prefix}/lib includedir: ${prefix}/include testdir: ${exec_prefix}/lib/odp/tests WITH_ARCH: x86 cc: gcc cc version: 4.9.2 cppflags: am_cppflags: -I<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=m32_on_64,label…> -I<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=m32_on_64,label…> am_cxxflags: -std=c++11 cflags: -m32 am_cflags: -pthread -DIMPLEMENTATION_NAME=odp-linux -DODP_DEBUG_PRINT=0 -DODP_DEBUG=0 -W -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wold-style-definition -Wpointer-arith -Wcast-align -Wnested-externs -Wcast-qual -Wformat-nonliteral -Wformat-security -Wundef -Wwrite-strings -std=c99 ldflags: -m32 am_ldflags: -pthread -lrt -L<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=m32_on_64,label…> -L<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=m32_on_64,label…> libs: -lcunit -lcrypto defs: -DHAVE_CONFIG_H cunit: yes test_vald: yes test_perf: yes test_perf_proc: yes test_cpp: no test_helper: yes test_example: yes user_guides: no + isdebug echo 'helper/generic: exiting function: do_configure()' + '[' 0 -eq 1 ']' + retcode=0 + return 0 + retcode=0 + [[ 0 -ne 0 ]] + return 0 + git log -1 --oneline + [[ -n '' ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + isdebug echo 'build: before make -j 8' + '[' 0 -eq 1 ']' + exit_on_error make -j 8 + quiet make -j 8 + [[ 0 -eq 1 ]] + make -j 8 Making all in platform/linux-generic make[1]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=m32_on_64,label…'> CC odp_atomic.lo CC odp_barrier.lo CC odp_classification.lo CC odp_buffer.lo CC odp_byteorder.lo CC odp_cpu.lo CC odp_cpumask.lo CC odp_cpumask_task.lo CC odp_crypto.lo CC odp_errno.lo CC odp_event.lo CC odp_hash.lo CC odp_init.lo CC odp_impl.lo CC odp_name_table.lo CC odp_packet.lo CC odp_packet_flags.lo CC odp_packet_io.lo CC odp_pkt_queue.lo CC odp_pool.lo CC odp_queue.lo CC odp_rwlock.lo CC odp_rwlock_recursive.lo CC odp_schedule.lo CC odp_schedule_if.lo CC odp_schedule_ordered.lo CC odp_schedule_sp.lo CC odp_shared_memory.lo CC odp_sorted_list.lo CC odp_spinlock.lo CC odp_spinlock_recursive.lo CC odp_std_clib.lo CC odp_sync.lo CC odp_thread.lo CC odp_system_info.lo CC odp_thrmask.lo CC odp_ticketlock.lo CC odp_time.lo CC odp_timer.lo CC odp_timer_wheel.lo CC odp_traffic_mngr.lo CC odp_version.lo CC odp_weak.lo CC pktio/ethtool.lo CC pktio/io_ops.lo CC pktio/ipc.lo CC pktio/pktio_common.lo Makefile:849: recipe for target 'odp_schedule_ordered.lo' failed make[1]: *** [odp_schedule_ordered.lo] Error 1 make[1]: *** Waiting for unfinished jobs.... make[1]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=m32_on_64,label…'> Makefile:472: recipe for target 'all-recursive' failed make: *** [all-recursive] Error 1 + cleanup_exit + isdebug echo 'build: entering function: cleanup_exit()' + '[' 0 -eq 1 ']' + [[ 0 -eq 1 ]] + isdebug echo 'build: exiting function: cleanup_exit()' + '[' 0 -eq 1 ']' + retcode=2 + set -e + '[' -d check-odp/build/odp/testdir/ ']' + test -d /home/buildslave/bin + mkdir /home/buildslave/bin + wget https://git.linaro.org/ci/publishing-api.git/blob_plain/HEAD:/linaro-cp.py -O /home/buildslave/bin/linaro-cp.py --2016-10-07 16:44:58-- https://git.linaro.org/ci/publishing-api.git/blob_plain/HEAD:/linaro-cp.py Resolving git.linaro.org (git.linaro.org)... 23.21.56.198 Connecting to git.linaro.org (git.linaro.org)|23.21.56.198|:443... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/x-python] Saving to: ‘/home/buildslave/bin/linaro-cp.py’ 0K .......... . 7.55M=0.001s 2016-10-07 16:44:59 (7.55 MB/s) - ‘/home/buildslave/bin/linaro-cp.py’ saved [11683] + '[' -d out ']' + '[' 2 -ne 0 ']' + exit 1 Build step 'Execute shell' marked build as failure Skipping publisher since build result is FAILURE

7 years, 5 months

Build failed in Jenkins: Build debian source for opendataplane.org (Generic implementation) #362-020c91ca

by ci_notify＠linaro.org

https://ci.linaro.org/jenkins/job/build-odp-deb/362/Changes: [maxim.uvarov] linux-generic: internal cache line size [maxim.uvarov] api: system: specify default huge page size [maxim.uvarov] api: traffic_mngr: Add pktio interface to odp_tm_egress_t struct [maxim.uvarov] api: tm: resolve todo [maxim.uvarov] example:ipsec: removed invalid todos. [maxim.uvarov] api:crypto: resolve todo items [maxim.uvarov] changelog: update for v1.11.0.0-monarch_lts [maxim.uvarov] api: version update from 1.10.1 to 1.11.0 [maxim.uvarov] configure.ac update version ------------------------------------------ Started by upstream project "trigger-build-odp" build number 339 originally caused by: Started by an SCM change [EnvInject] - Loading node environment variables. Building remotely on aarch64-07-0791c47029ca (docker-jessie-arm64 docker-jessie-arm64-07) in workspace <https://ci.linaro.org/jenkins/job/build-odp-deb/ws/> [YAD-PLUGIN] Injecting DOCKER_CONTAINER_ID variable. [YAD-PLUGIN] Injecting JENKINS_CLOUD_ID variable. [YAD-PLUGIN] DOCKER_HOST variable. [YAD-PLUGIN] Injecting DOCKER_CONTAINER_ID variable. [YAD-PLUGIN] Injecting JENKINS_CLOUD_ID variable. [YAD-PLUGIN] DOCKER_HOST variable. Cloning the remote Git repository Cloning repository https://git.linaro.org/lng/odp.git > /usr/bin/git init <https://ci.linaro.org/jenkins/job/build-odp-deb/ws/odp> # timeout=10 Fetching upstream changes from https://git.linaro.org/lng/odp.git > /usr/bin/git --version # timeout=10 > /usr/bin/git fetch --tags --progress https://git.linaro.org/lng/odp.git +refs/heads/*:refs/remotes/origin/* > /usr/bin/git config remote.origin.url https://git.linaro.org/lng/odp.git # timeout=10 > /usr/bin/git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 > /usr/bin/git config remote.origin.url https://git.linaro.org/lng/odp.git # timeout=10 Fetching upstream changes from https://git.linaro.org/lng/odp.git > /usr/bin/git fetch --tags --progress https://git.linaro.org/lng/odp.git +refs/heads/master:refs/remotes/origin/master > /usr/bin/git rev-parse refs/remotes/origin/master^{commit} # timeout=10 > /usr/bin/git rev-parse refs/remotes/origin/refs/heads/master^{commit} # timeout=10 [YAD-PLUGIN] Injecting DOCKER_CONTAINER_ID variable. [YAD-PLUGIN] Injecting JENKINS_CLOUD_ID variable. [YAD-PLUGIN] DOCKER_HOST variable. Checking out Revision 020c91ca5367e971cbfc493c5b92f65ec72a43e7 (refs/remotes/origin/master) > /usr/bin/git config core.sparsecheckout # timeout=10 > /usr/bin/git checkout -f 020c91ca5367e971cbfc493c5b92f65ec72a43e7 > /usr/bin/git rev-list 90ac2ecbf8aec6d4f876d161b3844c199527c33e # timeout=10 [YAD-PLUGIN] Injecting DOCKER_CONTAINER_ID variable. [YAD-PLUGIN] Injecting JENKINS_CLOUD_ID variable. [YAD-PLUGIN] DOCKER_HOST variable. Set build name. [YAD-PLUGIN] Injecting DOCKER_CONTAINER_ID variable. [YAD-PLUGIN] Injecting JENKINS_CLOUD_ID variable. [YAD-PLUGIN] DOCKER_HOST variable. New build name is '#362-020c91ca' [YAD-PLUGIN] Injecting DOCKER_CONTAINER_ID variable. [YAD-PLUGIN] Injecting JENKINS_CLOUD_ID variable. [YAD-PLUGIN] DOCKER_HOST variable. [build-odp-deb] $ /bin/bash /tmp/hudson3264301507653066383.sh + wget -qO - http://deb.opendataplane.org/odp.key + sudo apt-key add - OK + echo 'deb http://deb.opendataplane.org/ jessie main' + sudo tee /etc/apt/sources.list.d/odp.list deb http://deb.opendataplane.org/ jessie main + sudo apt-get -q=2 update + sudo apt-get -q=2 -y --no-install-recommends install debhelper devscripts xz-utils + pkg_source=odp + cd odp ++ git describe --long '--match=v*' ++ sed -e 's/^v//' ++ cut -d- -f1 + base_version=1.11.0.0_monarch ++ git describe --long '--match=v*' ++ sed -e 's/^v//' ++ cut -d- -f2 + nb_commit=99 ++ git log -n1 --pretty=format:%h + scm_commit=020c91c + pkg_version=1.11.0.0_monarch+git99+020c91c + pkg_dir=odp-1.11.0.0_monarch+git99+020c91c + git config tar.tar.xz.command 'xz -c' + git archive --format=tar.xz --prefix=odp-1.11.0.0_monarch+git99+020c91c/ origin/master + cd .. + tar xf odp_1.11.0.0_monarch+git99+020c91c.orig.tar.xz + packaging_dir=odp-packaging + packaging_repository=https://git.linaro.org/lng/odp-packaging.git + git clone -b master --depth 1 https://git.linaro.org/lng/odp-packaging.git Cloning into 'odp-packaging'... ++ cd odp-packaging ++ git log -n1 --pretty=format:%h + packaging_commit=8c474fd + mv odp-packaging/pkg/debian odp-1.11.0.0_monarch+git99+020c91c + rm -rf odp odp-packaging + cd odp-1.11.0.0_monarch+git99+020c91c + pkg_repository=https://git.linaro.org/lng/odp.git ++ date -R + current_date='Fri, 18 Nov 2016 21:00:55 +0000' + cat + dpkg-buildpackage -d -nc -us -uc -rfakeroot -S -sa parsechangelog/debian: warning: debian/changelog(l1): version '1.11.0.0_monarch+git99+020c91c-1' is invalid: version number contains illegal character `_' LINE: odp (1.11.0.0_monarch+git99+020c91c-1) unstable; urgency=medium dpkg-buildpackage: error: version number contains illegal character `_' dpkg-buildpackage: source package odp dpkg-buildpackage: source version 1.11.0.0_monarch+git99+020c91c-1 Build step 'Execute shell' marked build as failure Set build name. [YAD-PLUGIN] Injecting DOCKER_CONTAINER_ID variable. [YAD-PLUGIN] Injecting JENKINS_CLOUD_ID variable. [YAD-PLUGIN] DOCKER_HOST variable. New build name is '#362-020c91ca' Variable with name 'BUILD_DISPLAY_NAME' already exists, current value: '#362-020c91ca', new value: '#362-020c91ca' Archiving artifacts [YAD-PLUGIN] Injecting DOCKER_CONTAINER_ID variable. [YAD-PLUGIN] Injecting JENKINS_CLOUD_ID variable. [YAD-PLUGIN] DOCKER_HOST variable. [YAD-PLUGIN] Injecting DOCKER_CONTAINER_ID variable. [YAD-PLUGIN] Injecting JENKINS_CLOUD_ID variable. [YAD-PLUGIN] DOCKER_HOST variable.

7 years, 5 months

Build failed in Jenkins: ODP tool check » run_valid_from_install,docker-jessie-amd64 #677

by ci_notify＠linaro.org

https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_… [...truncated 845 lines...] configure.ac:50: installing './config.guess' configure.ac:50: installing './config.sub' configure.ac:21: installing './install-sh' configure.ac:21: installing './missing' example/classifier/Makefile.am: installing './depcomp' parallel-tests: installing './test-driver' + autoconf --force + retcode=0 + return 0 + retcode=0 + [[ 0 -ne 0 ]] + return 0 + exit_on_error do_configure . --with-platform=linux-generic --prefix=<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…> --enable-test-perf --enable-test-perf-proc --enable-test-helper --enable-test-example --enable-test-vald --with-testdir=yes + quiet do_configure . --with-platform=linux-generic --prefix=<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…> --enable-test-perf --enable-test-perf-proc --enable-test-helper --enable-test-example --enable-test-vald --with-testdir=yes + [[ 0 -eq 1 ]] + do_configure . --with-platform=linux-generic --prefix=<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…> --enable-test-perf --enable-test-perf-proc --enable-test-helper --enable-test-example --enable-test-vald --with-testdir=yes + isdebug echo 'helper/generic: entering function: do_configure()' + '[' 0 -eq 1 ']' + path=. ++ echo . --with-platform=linux-generic --prefix=<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…> --enable-test-perf --enable-test-perf-proc --enable-test-helper --enable-test-example --enable-test-vald --with-testdir=yes ++ cut -f 1 -d ' ' --complement + args='--with-platform=linux-generic --prefix=<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…> --enable-test-perf --enable-test-perf-proc --enable-test-helper --enable-test-example --enable-test-vald --with-testdir=yes' + echo ./configure --with-platform=linux-generic --prefix=<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…> --enable-test-perf --enable-test-perf-proc --enable-test-helper --enable-test-example --enable-test-vald --with-testdir=yes ./configure --with-platform=linux-generic --prefix=<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…> --enable-test-perf --enable-test-perf-proc --enable-test-helper --enable-test-example --enable-test-vald --with-testdir=yes + ./configure --with-platform=linux-generic --prefix=<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…> --enable-test-perf --enable-test-perf-proc --enable-test-helper --enable-test-example --enable-test-vald --with-testdir=yes checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking how to create a pax tar archive... gnutar checking for style of include used by make... GNU checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... gcc3 checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking whether make supports nested variables... (cached) yes checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking whether gcc understands -c and -o together... (cached) yes checking dependency style of gcc... (cached) gcc3 checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking whether make sets $(MAKE)... (cached) yes checking for ar... ar checking the archiver (ar) interface... ar checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for mt... mt checking if mt is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking how to run the C++ preprocessor... g++ -E checking for ld used by g++... /usr/bin/ld -m elf_x86_64 checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC -DPIC checking if g++ PIC flag -fPIC -DPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for stdlib.h... (cached) yes checking for GNU libc compatible malloc... yes checking for stdlib.h... (cached) yes checking for unistd.h... (cached) yes checking for sys/param.h... yes checking for getpagesize... yes checking for working mmap... yes checking for bzero... yes checking for clock_gettime... yes checking for gethostbyname... yes checking for getpagesize... (cached) yes checking for gettimeofday... yes checking for memset... yes checking for munmap... yes checking for socket... yes checking for strchr... yes checking for strerror... yes checking for strrchr... yes checking for strstr... yes checking for strtoull... yes checking for sys/types.h... (cached) yes checking for netinet/in.h... yes checking for arpa/nameser.h... yes checking for netdb.h... yes checking for resolv.h... yes checking arpa/inet.h usability... yes checking arpa/inet.h presence... yes checking for arpa/inet.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking for inttypes.h... (cached) yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking for netdb.h... (cached) yes checking for netinet/in.h... (cached) yes checking stddef.h usability... yes checking stddef.h presence... yes checking for stddef.h... yes checking for stdint.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking for unistd.h... (cached) yes checking for stdbool.h that conforms to C99... yes checking for _Bool... yes checking for inline... inline checking for size_t... yes checking for ssize_t... yes checking for uint8_t... yes checking for uint16_t... yes checking for int32_t... yes checking for uint32_t... yes checking for uint64_t... yes checking for C compiler vendor... gnu checking for C compiler version... 4.9.2 checking for valgrind... no checking whether gcc supports -fvisibility=hidden... yes checking for GCC atomic builtins... yes checking if compiler needs -Werror to reject unknown flags... no checking for the pthreads library -lpthreads... no checking whether pthreads work without any flags... no checking whether pthreads work with -Kthread... no checking whether pthreads work with -kthread... no checking for the pthreads library -llthread... no checking whether pthreads work with -pthread... yes checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE checking if more special flags are required for pthreads... no checking for PTHREAD_PRIO_INHERIT... yes checking for EVP_EncryptInit in -lcrypto... no configure: error: in `<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'>: configure: error: OpenSSL libraries required See `config.log' for more details + cleanup_exit + isdebug echo 'build: entering function: cleanup_exit()' + '[' 0 -eq 1 ']' + [[ 0 -eq 1 ]] + isdebug echo 'build: exiting function: cleanup_exit()' + '[' 0 -eq 1 ']' + retcode=1 + set -e + '[' -d check-odp/build/odp/testdir/ ']' + test -d /home/buildslave/bin + mkdir /home/buildslave/bin + wget https://git.linaro.org/ci/publishing-api.git/blob_plain/HEAD:/linaro-cp.py -O /home/buildslave/bin/linaro-cp.py --2016-11-30 17:02:15-- https://git.linaro.org/ci/publishing-api.git/blob_plain/HEAD:/linaro-cp.py Resolving git.linaro.org (git.linaro.org)... 46.137.111.246 Connecting to git.linaro.org (git.linaro.org)|46.137.111.246|:443... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: https://git.linaro.org/ci/publishing-api.git/plain/linaro-cp.py [following] --2016-11-30 17:02:15-- https://git.linaro.org/ci/publishing-api.git/plain/linaro-cp.py Reusing existing connection to git.linaro.org:443. HTTP request sent, awaiting response... 200 OK Length: 11683 (11K) [text/plain] Saving to: ‘/home/buildslave/bin/linaro-cp.py’ 0K .......... . 100% 59.6M=0s 2016-11-30 17:02:15 (59.6 MB/s) - ‘/home/buildslave/bin/linaro-cp.py’ saved [11683/11683] + '[' -d out ']' + '[' 1 -ne 0 ']' + exit 1 Build step 'Execute shell' marked build as failure Skipping publisher since build result is FAILURE [YAD-PLUGIN] Injecting DOCKER_CONTAINER_ID variable. [YAD-PLUGIN] Injecting JENKINS_CLOUD_ID variable. [YAD-PLUGIN] DOCKER_HOST variable.

7 years, 5 months

Build failed in Jenkins: ODP API check » x86-64,docker-jessie-amd64,all #919

by ci_notify＠linaro.org

https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je… [...truncated 4858 lines...] make[5]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[5]: Nothing to be done for 'check-am'. make[5]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[4]: Nothing to be done for 'check-am'. make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[2]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making check in linux-generic make[2]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making check in performance make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make check-TESTS make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[5]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> PASS: odp_scheduling_run_proc.sh make[6]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[6]: Nothing to be done for 'all'. make[6]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> ============================================================================ Testsuite summary for OpenDataPlane 1.11.0.0 ============================================================================ # TOTAL: 1 # PASS: 1 # SKIP: 0 # XFAIL: 0 # FAIL: 0 # XPASS: 0 # ERROR: 0 ============================================================================ make[5]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making check in validation/api/pktio make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make pktio_env pktio_run.sh pktio_run_tap.sh pktio_run_pcap.sh pktio_run_netmap.sh make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[4]: Nothing to be done for '../../../../../../test/linux-generic/validation/api/pktio/pktio_env'. make[4]: Nothing to be done for '../../../../../../test/linux-generic/validation/api/pktio/pktio_run.sh'. make[4]: Nothing to be done for '../../../../../../test/linux-generic/validation/api/pktio/pktio_run_tap.sh'. make[4]: Nothing to be done for '../../../../../../test/linux-generic/validation/api/pktio/pktio_run_pcap.sh'. make[4]: Nothing to be done for '../../../../../../test/linux-generic/validation/api/pktio/pktio_run_netmap.sh'. make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making check in validation/api/shmem make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making check in mmap_vlan_ins make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make vlan.pcap mmap_vlan_ins.sh pktio_env make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[4]: Nothing to be done for '../../../../test/linux-generic/mmap_vlan_ins/vlan.pcap'. make[4]: Nothing to be done for '../../../../test/linux-generic/mmap_vlan_ins/mmap_vlan_ins.sh'. make[4]: Nothing to be done for '../../../../test/linux-generic/mmap_vlan_ins/pktio_env'. make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making check in pktio_ipc make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make pktio_ipc_run.sh make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[4]: Nothing to be done for '../../../../test/linux-generic/pktio_ipc/pktio_ipc_run.sh'. make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making check in ring make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making check in mmap_vlan_ins make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make vlan.pcap mmap_vlan_ins.sh pktio_env make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[4]: Nothing to be done for '../../../../test/linux-generic/mmap_vlan_ins/vlan.pcap'. make[4]: Nothing to be done for '../../../../test/linux-generic/mmap_vlan_ins/mmap_vlan_ins.sh'. make[4]: Nothing to be done for '../../../../test/linux-generic/mmap_vlan_ins/pktio_env'. make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making check in pktio_ipc make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make pktio_ipc_run.sh make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[4]: Nothing to be done for '../../../../test/linux-generic/pktio_ipc/pktio_ipc_run.sh'. make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make run-test tests-validation.env make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[4]: Nothing to be done for '../../../test/linux-generic/run-test'. make[4]: 'tests-validation.env' is up to date. make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make check-TESTS make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[5]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> PASS: validation/api/pktio/pktio_run.sh SKIP: validation/api/pktio/pktio_run_tap.sh PASS: validation/api/shmem/shmem_linux PASS: ../../test/common_plat/validation/api/atomic/atomic_main PASS: ../../test/common_plat/validation/api/barrier/barrier_main PASS: ../../test/common_plat/validation/api/buffer/buffer_main PASS: ../../test/common_plat/validation/api/classification/classification_main PASS: ../../test/common_plat/validation/api/cpumask/cpumask_main PASS: ../../test/common_plat/validation/api/crypto/crypto_main PASS: ../../test/common_plat/validation/api/errno/errno_main PASS: ../../test/common_plat/validation/api/hash/hash_main PASS: ../../test/common_plat/validation/api/init/init_main_ok PASS: ../../test/common_plat/validation/api/init/init_main_abort PASS: ../../test/common_plat/validation/api/init/init_main_log PASS: ../../test/common_plat/validation/api/lock/lock_main PASS: ../../test/common_plat/validation/api/packet/packet_main PASS: ../../test/common_plat/validation/api/pool/pool_main PASS: ../../test/common_plat/validation/api/queue/queue_main PASS: ../../test/common_plat/validation/api/random/random_main PASS: ../../test/common_plat/validation/api/scheduler/scheduler_main PASS: ../../test/common_plat/validation/api/std_clib/std_clib_main PASS: ../../test/common_plat/validation/api/thread/thread_main PASS: ../../test/common_plat/validation/api/time/time_main PASS: ../../test/common_plat/validation/api/timer/timer_main PASS: ../../test/common_plat/validation/api/traffic_mngr/traffic_mngr_main PASS: ../../test/common_plat/validation/api/shmem/shmem_main PASS: ../../test/common_plat/validation/api/system/system_main PASS: ring/ring_main PASS: validation/api/pktio/pktio_run_pcap.sh SKIP: mmap_vlan_ins/mmap_vlan_ins.sh SKIP: validation/api/pktio/pktio_run_netmap.sh FAIL: pktio_ipc/pktio_ipc_run.sh make[6]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making all in performance make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making all in validation/api/pktio make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making all in validation/api/shmem make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making all in mmap_vlan_ins make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making all in pktio_ipc make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making all in ring make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making all in mmap_vlan_ins make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making all in pktio_ipc make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[7]: Nothing to be done for 'all-am'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[6]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> ============================================================================ Testsuite summary for OpenDataPlane 1.11.0.0 ============================================================================ # TOTAL: 32 # PASS: 28 # SKIP: 3 # XFAIL: 0 # FAIL: 1 # XPASS: 0 # ERROR: 0 ============================================================================ See test/linux-generic/test-suite.log Please report to lng-odp(a)lists.linaro.org ============================================================================ Makefile:838: recipe for target 'test-suite.log' failed make[5]: *** [test-suite.log] Error 1 make[5]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Makefile:944: recipe for target 'check-TESTS' failed make[4]: *** [check-TESTS] Error 2 make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Makefile:1217: recipe for target 'check-am' failed make[3]: *** [check-am] Error 2 make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Makefile:731: recipe for target 'check-recursive' failed make[2]: *** [check-recursive] Error 1 make[2]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Makefile:419: recipe for target 'check-recursive' failed make[1]: *** [check-recursive] Error 1 make[1]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Makefile:477: recipe for target 'check-recursive' failed make: *** [check-recursive] Error 1 + cleanup_exit + isdebug echo 'build: entering function: cleanup_exit()' + '[' 0 -eq 1 ']' + [[ 0 -eq 1 ]] + isdebug echo 'build: exiting function: cleanup_exit()' + '[' 0 -eq 1 ']' + retcode=2 + set -e + '[' -d check-odp/build/odp/testdir/ ']' + mkdir -p out/log + find check-odp/build/odp/testdir/ -type f -name '*.log' -exec cp '{}' out/log ';' + case "${ARCH}" in + case "${label}" in + test -d /home/buildslave/bin + mkdir /home/buildslave/bin + wget https://git.linaro.org/ci/publishing-api.git/blob_plain/HEAD:/linaro-cp.py -O /home/buildslave/bin/linaro-cp.py --2016-11-29 15:46:00-- https://git.linaro.org/ci/publishing-api.git/blob_plain/HEAD:/linaro-cp.py Resolving git.linaro.org (git.linaro.org)... 46.137.111.246 Connecting to git.linaro.org (git.linaro.org)|46.137.111.246|:443... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: https://git.linaro.org/ci/publishing-api.git/plain/linaro-cp.py [following] --2016-11-29 15:46:00-- https://git.linaro.org/ci/publishing-api.git/plain/linaro-cp.py Reusing existing connection to git.linaro.org:443. HTTP request sent, awaiting response... 200 OK Length: 11683 (11K) [text/plain] Saving to: ‘/home/buildslave/bin/linaro-cp.py’ 0K .......... . 100% 62.5M=0s 2016-11-29 15:46:00 (62.5 MB/s) - ‘/home/buildslave/bin/linaro-cp.py’ saved [11683/11683] + '[' -d out ']' + PUB_DEST=components/lng/odp/odp-api-check/master/docker-jessie-amd64//all/919 + python /home/buildslave/bin/linaro-cp.py --api_version 3 --link-latest out components/lng/odp/odp-api-check/master/docker-jessie-amd64//all/919 real 0m47.648s user 0m0.860s sys 0m0.228s + echo '***************************' *************************** + echo 'Logs published on http://snapshots.linaro.org/components/lng/odp/odp-api-check/master/docker-…' Logs published on http://snapshots.linaro.org/components/lng/odp/odp-api-check/master/docker-… + echo '***************************' *************************** + cat + '[' 2 -ne 0 ']' + exit 1 Build step 'Execute shell' marked build as failure Skipping publisher since build result is FAILURE [YAD-PLUGIN] Injecting DOCKER_CONTAINER_ID variable. [YAD-PLUGIN] Injecting JENKINS_CLOUD_ID variable. [YAD-PLUGIN] DOCKER_HOST variable.

7 years, 5 months

Build failed in Jenkins: ODP tool check » run_valid_from_install,docker-jessie-amd64 #673

by ci_notify＠linaro.org

https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_… [...truncated 4470 lines...] make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[2]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> Making install in helper-guide make[2]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[2]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> Making install in platform-api-guide make[2]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[2]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[2]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[2]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[1]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> Making install in example make[1]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> Making install in classifier make[2]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> /bin/mkdir -p '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> /bin/bash ../../libtool --mode=install /usr/bin/install -c odp_classifier '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> libtool: install: /usr/bin/install -c odp_classifier <https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…> make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[2]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> Making install in generator make[2]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> /bin/mkdir -p '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> /bin/bash ../../libtool --mode=install /usr/bin/install -c odp_generator '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> libtool: install: /usr/bin/install -c odp_generator <https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…> make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[2]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> Making install in hello make[2]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> /bin/mkdir -p '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> /bin/bash ../../libtool --mode=install /usr/bin/install -c odp_hello '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> libtool: install: /usr/bin/install -c odp_hello <https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…> make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[2]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> Making install in ipsec make[2]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> /bin/mkdir -p '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> /bin/bash ../../libtool --mode=install /usr/bin/install -c odp_ipsec '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> libtool: install: /usr/bin/install -c odp_ipsec <https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…> /bin/mkdir -p '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> /usr/bin/install -c ../../../example/ipsec/odp_ipsec_run_ah_in ../../../example/ipsec/odp_ipsec_run_ah_out ../../../example/ipsec/odp_ipsec_run_both_in ../../../example/ipsec/odp_ipsec_run_both_out ../../../example/ipsec/odp_ipsec_run_esp_in ../../../example/ipsec/odp_ipsec_run_esp_out ../../../example/ipsec/odp_ipsec_run_live ../../../example/ipsec/odp_ipsec_run_router ../../../example/ipsec/odp_ipsec_run_simple '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[2]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> Making install in l2fwd_simple make[2]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> /bin/mkdir -p '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> /bin/bash ../../libtool --mode=install /usr/bin/install -c odp_l2fwd_simple '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> libtool: install: /usr/bin/install -c odp_l2fwd_simple <https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…> make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[2]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> Making install in l3fwd make[2]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> /bin/mkdir -p '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> /bin/bash ../../libtool --mode=install /usr/bin/install -c odp_l3fwd '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> libtool: install: /usr/bin/install -c odp_l3fwd <https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…> make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[2]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> Making install in packet make[2]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> /bin/mkdir -p '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> /bin/bash ../../libtool --mode=install /usr/bin/install -c odp_pktio '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> libtool: install: /usr/bin/install -c odp_pktio <https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…> make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[2]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> Making install in switch make[2]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> /bin/mkdir -p '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> /bin/bash ../../libtool --mode=install /usr/bin/install -c odp_switch '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> libtool: install: /usr/bin/install -c odp_switch <https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…> make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[2]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> Making install in time make[2]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> /bin/mkdir -p '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> /bin/bash ../../libtool --mode=install /usr/bin/install -c odp_time_global '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> libtool: install: /usr/bin/install -c odp_time_global <https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…> make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[2]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> Making install in timer make[2]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> /bin/mkdir -p '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> /bin/bash ../../libtool --mode=install /usr/bin/install -c odp_timer_test odp_timer_simple '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> libtool: install: /usr/bin/install -c odp_timer_test <https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…> libtool: install: /usr/bin/install -c odp_timer_simple <https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…> make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[2]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> Making install in traffic_mgmt make[2]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> /bin/mkdir -p '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> /bin/bash ../../libtool --mode=install /usr/bin/install -c odp_traffic_mgmt '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> libtool: install: /usr/bin/install -c odp_traffic_mgmt <https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…> make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[2]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[2]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[2]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[1]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[1]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[2]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[2]: Nothing to be done for 'install-exec-am'. make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> make[1]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…'> + retcode=0 + return 0 + retcode=0 + [[ 0 -ne 0 ]] + return 0 + isdebug echo 'build: before if M32_ON_64: 0' + '[' 0 -eq 1 ']' + [[ 0 -eq 1 ]] + isdebug echo 'build: before if ARCH: ' + '[' 0 -eq 1 ']' + [[ -z '' ]] + isdebug echo 'build: before if MAKE_CHECK_TEST: 1' + '[' 0 -eq 1 ']' + [[ 1 -eq 1 ]] + isdebug echo 'build: before if RUN_VALID_FROM_INSTALL: 1' + '[' 0 -eq 1 ']' + [[ 1 -eq 0 ]] + export V=0 + V=0 + exit_on_error run_with_sudo <https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…> + quiet run_with_sudo <https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…> + [[ 0 -eq 1 ]] + run_with_sudo <https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…> + isdebug echo 'helper/generic: entering function: run_with_sudo()' + '[' 0 -eq 1 ']' + [[ '' -eq 1 ]] + <https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=run_valid_from_…> PASS: pktio_run.sh SKIP: pktio_run_tap.sh PASS: shmem_linux PASS: atomic_main PASS: barrier_main PASS: buffer_main PASS: classification_main PASS: cpumask_main PASS: crypto_main PASS: errno_main PASS: hash_main PASS: init_main_ok PASS: init_main_abort PASS: init_main_log PASS: lock_main PASS: packet_main PASS: pool_main PASS: queue_main PASS: random_main PASS: scheduler_main PASS: std_clib_main PASS: thread_main PASS: time_main PASS: timer_main FAIL: traffic_mngr_main PASS: shmem_main PASS: system_main PASS: ring_main PASS: pktio_run_pcap.sh SKIP: mmap_vlan_ins.sh TEST RESULT: 27 tests passed, 2 skipped, 1 failed + cleanup_exit + isdebug echo 'build: entering function: cleanup_exit()' + '[' 0 -eq 1 ']' + [[ 0 -eq 1 ]] + isdebug echo 'build: exiting function: cleanup_exit()' + '[' 0 -eq 1 ']' + retcode=1 + set -e + '[' -d check-odp/build/odp/testdir/ ']' + mkdir -p out/log + find check-odp/build/odp/testdir/ -type f -name '*.log' -exec cp '{}' out/log ';' + test -d /home/buildslave/bin + mkdir /home/buildslave/bin + wget https://git.linaro.org/ci/publishing-api.git/blob_plain/HEAD:/linaro-cp.py -O /home/buildslave/bin/linaro-cp.py --2016-11-29 14:36:27-- https://git.linaro.org/ci/publishing-api.git/blob_plain/HEAD:/linaro-cp.py Resolving git.linaro.org (git.linaro.org)... 46.137.111.246 Connecting to git.linaro.org (git.linaro.org)|46.137.111.246|:443... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: https://git.linaro.org/ci/publishing-api.git/plain/linaro-cp.py [following] --2016-11-29 14:36:28-- https://git.linaro.org/ci/publishing-api.git/plain/linaro-cp.py Reusing existing connection to git.linaro.org:443. HTTP request sent, awaiting response... 200 OK Length: 11683 (11K) [text/plain] Saving to: ‘/home/buildslave/bin/linaro-cp.py’ 0K .......... . 100% 17.9M=0.001s 2016-11-29 14:36:28 (17.9 MB/s) - ‘/home/buildslave/bin/linaro-cp.py’ saved [11683/11683] + '[' -d out ']' + PUB_DEST=components/lng/odp/odp-tool-check/master/docker-jessie-amd64/673 + python /home/buildslave/bin/linaro-cp.py --api_version 3 --link-latest out components/lng/odp/odp-tool-check/master/docker-jessie-amd64/673 real 0m42.875s user 0m0.516s sys 0m0.084s + echo '***************************' *************************** + echo 'Logs published on http://snapshots.linaro.org/components/lng/odp/odp-tool-check/master/docker…' Logs published on http://snapshots.linaro.org/components/lng/odp/odp-tool-check/master/docker… + echo '***************************' *************************** + '[' 1 -ne 0 ']' + exit 1 Build step 'Execute shell' marked build as failure Skipping publisher since build result is FAILURE [YAD-PLUGIN] Injecting DOCKER_CONTAINER_ID variable. [YAD-PLUGIN] Injecting JENKINS_CLOUD_ID variable. [YAD-PLUGIN] DOCKER_HOST variable.

7 years, 5 months

Build failed in Jenkins: ODP API check » arm64,docker-jessie-arm64,netmap #917

by ci_notify＠linaro.org

https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes… [...truncated 4608 lines...] make[5]: Nothing to be done for 'check'. make[5]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making check in shmem make[5]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[5]: Nothing to be done for 'check'. make[5]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making check in system make[5]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[5]: Nothing to be done for 'check'. make[5]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[5]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[5]: Nothing to be done for 'check-am'. make[5]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[4]: Nothing to be done for 'check-am'. make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[2]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making check in linux-generic make[2]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making check in performance make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make check-TESTS make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[5]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> PASS: odp_scheduling_run_proc.sh make[6]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[6]: Nothing to be done for 'all'. make[6]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> ============================================================================ Testsuite summary for OpenDataPlane 1.11.0.0 ============================================================================ # TOTAL: 1 # PASS: 1 # SKIP: 0 # XFAIL: 0 # FAIL: 0 # XPASS: 0 # ERROR: 0 ============================================================================ make[5]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making check in validation/api/pktio make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make pktio_env pktio_run.sh pktio_run_tap.sh pktio_run_pcap.sh pktio_run_netmap.sh make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[4]: Nothing to be done for '../../../../../../test/linux-generic/validation/api/pktio/pktio_env'. make[4]: Nothing to be done for '../../../../../../test/linux-generic/validation/api/pktio/pktio_run.sh'. make[4]: Nothing to be done for '../../../../../../test/linux-generic/validation/api/pktio/pktio_run_tap.sh'. make[4]: Nothing to be done for '../../../../../../test/linux-generic/validation/api/pktio/pktio_run_pcap.sh'. make[4]: Nothing to be done for '../../../../../../test/linux-generic/validation/api/pktio/pktio_run_netmap.sh'. make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making check in validation/api/shmem make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making check in mmap_vlan_ins make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make vlan.pcap mmap_vlan_ins.sh pktio_env make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[4]: Nothing to be done for '../../../../test/linux-generic/mmap_vlan_ins/vlan.pcap'. make[4]: Nothing to be done for '../../../../test/linux-generic/mmap_vlan_ins/mmap_vlan_ins.sh'. make[4]: Nothing to be done for '../../../../test/linux-generic/mmap_vlan_ins/pktio_env'. make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making check in pktio_ipc make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make pktio_ipc_run.sh make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[4]: Nothing to be done for '../../../../test/linux-generic/pktio_ipc/pktio_ipc_run.sh'. make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making check in ring make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making check in mmap_vlan_ins make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make vlan.pcap mmap_vlan_ins.sh pktio_env make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[4]: Nothing to be done for '../../../../test/linux-generic/mmap_vlan_ins/vlan.pcap'. make[4]: Nothing to be done for '../../../../test/linux-generic/mmap_vlan_ins/mmap_vlan_ins.sh'. make[4]: Nothing to be done for '../../../../test/linux-generic/mmap_vlan_ins/pktio_env'. make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make run-test tests-validation.env make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[4]: Nothing to be done for '../../../test/linux-generic/run-test'. make[4]: 'tests-validation.env' is up to date. make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make check-TESTS make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[5]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> PASS: validation/api/pktio/pktio_run.sh SKIP: validation/api/pktio/pktio_run_tap.sh PASS: validation/api/shmem/shmem_linux PASS: ../../test/common_plat/validation/api/atomic/atomic_main PASS: ../../test/common_plat/validation/api/barrier/barrier_main PASS: ../../test/common_plat/validation/api/buffer/buffer_main PASS: ../../test/common_plat/validation/api/classification/classification_main PASS: ../../test/common_plat/validation/api/cpumask/cpumask_main PASS: ../../test/common_plat/validation/api/crypto/crypto_main PASS: ../../test/common_plat/validation/api/errno/errno_main PASS: ../../test/common_plat/validation/api/hash/hash_main PASS: ../../test/common_plat/validation/api/init/init_main_ok PASS: ../../test/common_plat/validation/api/init/init_main_abort PASS: ../../test/common_plat/validation/api/init/init_main_log PASS: ../../test/common_plat/validation/api/lock/lock_main PASS: ../../test/common_plat/validation/api/packet/packet_main PASS: ../../test/common_plat/validation/api/pool/pool_main PASS: ../../test/common_plat/validation/api/queue/queue_main PASS: ../../test/common_plat/validation/api/random/random_main PASS: ../../test/common_plat/validation/api/scheduler/scheduler_main PASS: ../../test/common_plat/validation/api/std_clib/std_clib_main PASS: ../../test/common_plat/validation/api/thread/thread_main PASS: ../../test/common_plat/validation/api/time/time_main FAIL: ../../test/common_plat/validation/api/timer/timer_main PASS: ../../test/common_plat/validation/api/traffic_mngr/traffic_mngr_main PASS: ../../test/common_plat/validation/api/shmem/shmem_main PASS: ../../test/common_plat/validation/api/system/system_main PASS: ring/ring_main PASS: validation/api/pktio/pktio_run_pcap.sh SKIP: mmap_vlan_ins/mmap_vlan_ins.sh SKIP: validation/api/pktio/pktio_run_netmap.sh make[6]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making all in performance make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making all in validation/api/pktio make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making all in validation/api/shmem make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making all in mmap_vlan_ins make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making all in pktio_ipc make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making all in ring make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making all in mmap_vlan_ins make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[7]: Nothing to be done for 'all-am'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[6]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> ============================================================================ Testsuite summary for OpenDataPlane 1.11.0.0 ============================================================================ # TOTAL: 31 # PASS: 27 # SKIP: 3 # XFAIL: 0 # FAIL: 1 # XPASS: 0 # ERROR: 0 ============================================================================ See test/linux-generic/test-suite.log Please report to lng-odp(a)lists.linaro.org ============================================================================ Makefile:838: recipe for target 'test-suite.log' failed make[5]: *** [test-suite.log] Error 1 make[5]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Makefile:944: recipe for target 'check-TESTS' failed make[4]: *** [check-TESTS] Error 2 make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Makefile:1217: recipe for target 'check-am' failed make[3]: *** [check-am] Error 2 make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Makefile:731: recipe for target 'check-recursive' failed make[2]: *** [check-recursive] Error 1 make[2]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Makefile:419: recipe for target 'check-recursive' failed make[1]: *** [check-recursive] Error 1 make[1]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Makefile:477: recipe for target 'check-recursive' failed make: *** [check-recursive] Error 1 + cleanup_exit + isdebug echo 'build: entering function: cleanup_exit()' + '[' 0 -eq 1 ']' + [[ 0 -eq 1 ]] + isdebug echo 'build: exiting function: cleanup_exit()' + '[' 0 -eq 1 ']' + retcode=2 + set -e + '[' -d check-odp/build/odp/testdir/ ']' + mkdir -p out/log + find check-odp/build/odp/testdir/ -type f -name '*.log' -exec cp '{}' out/log ';' + case "${ARCH}" in + case "${label}" in + export ARCH=arm64 + ARCH=arm64 + test -d /home/buildslave/bin + mkdir /home/buildslave/bin + wget https://git.linaro.org/ci/publishing-api.git/blob_plain/HEAD:/linaro-cp.py -O /home/buildslave/bin/linaro-cp.py --2016-11-28 11:30:20-- https://git.linaro.org/ci/publishing-api.git/blob_plain/HEAD:/linaro-cp.py Resolving git.linaro.org (git.linaro.org)... 23.21.56.198 Connecting to git.linaro.org (git.linaro.org)|23.21.56.198|:443... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: https://git.linaro.org/ci/publishing-api.git/plain/linaro-cp.py [following] --2016-11-28 11:30:21-- https://git.linaro.org/ci/publishing-api.git/plain/linaro-cp.py Reusing existing connection to git.linaro.org:443. HTTP request sent, awaiting response... 200 OK Length: 11683 (11K) [text/plain] Saving to: ‘/home/buildslave/bin/linaro-cp.py’ 0K .......... . 100% 23.7M=0s 2016-11-28 11:30:21 (23.7 MB/s) - ‘/home/buildslave/bin/linaro-cp.py’ saved [11683/11683] + '[' -d out ']' + PUB_DEST=components/lng/odp/odp-api-check/master/docker-jessie-arm64/arm64/netmap/917 + python /home/buildslave/bin/linaro-cp.py --api_version 3 --link-latest out components/lng/odp/odp-api-check/master/docker-jessie-arm64/arm64/netmap/917 real 0m38.743s user 0m1.588s sys 0m0.152s + echo '***************************' *************************** + echo 'Logs published on http://snapshots.linaro.org/components/lng/odp/odp-api-check/master/docker-…' Logs published on http://snapshots.linaro.org/components/lng/odp/odp-api-check/master/docker-… + echo '***************************' *************************** + cat + '[' 2 -ne 0 ']' + exit 1 Build step 'Execute shell' marked build as failure Skipping publisher since build result is FAILURE [YAD-PLUGIN] Injecting DOCKER_CONTAINER_ID variable. [YAD-PLUGIN] Injecting JENKINS_CLOUD_ID variable. [YAD-PLUGIN] DOCKER_HOST variable.

7 years, 5 months

Build failed in Jenkins: ODP API check » arm64,docker-jessie-arm64,ipc #916

by ci_notify＠linaro.org

https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes… [...truncated 4634 lines...] make[5]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[5]: Nothing to be done for 'check-am'. make[5]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[4]: Nothing to be done for 'check-am'. make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[2]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making check in linux-generic make[2]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making check in performance make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make check-TESTS make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[5]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> PASS: odp_scheduling_run_proc.sh make[6]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[6]: Nothing to be done for 'all'. make[6]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> ============================================================================ Testsuite summary for OpenDataPlane 1.11.0.0 ============================================================================ # TOTAL: 1 # PASS: 1 # SKIP: 0 # XFAIL: 0 # FAIL: 0 # XPASS: 0 # ERROR: 0 ============================================================================ make[5]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making check in validation/api/pktio make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make pktio_env pktio_run.sh pktio_run_tap.sh pktio_run_pcap.sh make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[4]: Nothing to be done for '../../../../../../test/linux-generic/validation/api/pktio/pktio_env'. make[4]: Nothing to be done for '../../../../../../test/linux-generic/validation/api/pktio/pktio_run.sh'. make[4]: Nothing to be done for '../../../../../../test/linux-generic/validation/api/pktio/pktio_run_tap.sh'. make[4]: Nothing to be done for '../../../../../../test/linux-generic/validation/api/pktio/pktio_run_pcap.sh'. make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making check in validation/api/shmem make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making check in mmap_vlan_ins make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make vlan.pcap mmap_vlan_ins.sh pktio_env make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[4]: Nothing to be done for '../../../../test/linux-generic/mmap_vlan_ins/vlan.pcap'. make[4]: Nothing to be done for '../../../../test/linux-generic/mmap_vlan_ins/mmap_vlan_ins.sh'. make[4]: Nothing to be done for '../../../../test/linux-generic/mmap_vlan_ins/pktio_env'. make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making check in pktio_ipc make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make pktio_ipc_run.sh make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[4]: Nothing to be done for '../../../../test/linux-generic/pktio_ipc/pktio_ipc_run.sh'. make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making check in ring make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making check in mmap_vlan_ins make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make vlan.pcap mmap_vlan_ins.sh pktio_env make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[4]: Nothing to be done for '../../../../test/linux-generic/mmap_vlan_ins/vlan.pcap'. make[4]: Nothing to be done for '../../../../test/linux-generic/mmap_vlan_ins/mmap_vlan_ins.sh'. make[4]: Nothing to be done for '../../../../test/linux-generic/mmap_vlan_ins/pktio_env'. make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making check in pktio_ipc make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make pktio_ipc_run.sh make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[4]: Nothing to be done for '../../../../test/linux-generic/pktio_ipc/pktio_ipc_run.sh'. make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make run-test tests-validation.env make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[4]: Nothing to be done for '../../../test/linux-generic/run-test'. make[4]: 'tests-validation.env' is up to date. make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make check-TESTS make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[5]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> PASS: validation/api/pktio/pktio_run.sh SKIP: validation/api/pktio/pktio_run_tap.sh PASS: validation/api/shmem/shmem_linux PASS: ../../test/common_plat/validation/api/atomic/atomic_main PASS: ../../test/common_plat/validation/api/barrier/barrier_main PASS: ../../test/common_plat/validation/api/buffer/buffer_main PASS: ../../test/common_plat/validation/api/classification/classification_main PASS: ../../test/common_plat/validation/api/cpumask/cpumask_main PASS: ../../test/common_plat/validation/api/crypto/crypto_main PASS: ../../test/common_plat/validation/api/errno/errno_main PASS: ../../test/common_plat/validation/api/hash/hash_main PASS: ../../test/common_plat/validation/api/init/init_main_ok PASS: ../../test/common_plat/validation/api/init/init_main_abort PASS: ../../test/common_plat/validation/api/init/init_main_log PASS: ../../test/common_plat/validation/api/lock/lock_main PASS: ../../test/common_plat/validation/api/packet/packet_main PASS: ../../test/common_plat/validation/api/pool/pool_main PASS: ../../test/common_plat/validation/api/queue/queue_main PASS: ../../test/common_plat/validation/api/random/random_main PASS: ../../test/common_plat/validation/api/scheduler/scheduler_main PASS: ../../test/common_plat/validation/api/std_clib/std_clib_main PASS: ../../test/common_plat/validation/api/thread/thread_main PASS: ../../test/common_plat/validation/api/time/time_main PASS: ../../test/common_plat/validation/api/timer/timer_main PASS: ../../test/common_plat/validation/api/traffic_mngr/traffic_mngr_main PASS: ../../test/common_plat/validation/api/shmem/shmem_main PASS: ../../test/common_plat/validation/api/system/system_main PASS: ring/ring_main PASS: validation/api/pktio/pktio_run_pcap.sh SKIP: mmap_vlan_ins/mmap_vlan_ins.sh FAIL: pktio_ipc/pktio_ipc_run.sh make[6]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making all in performance make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making all in validation/api/pktio make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making all in validation/api/shmem make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making all in mmap_vlan_ins make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making all in pktio_ipc make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making all in ring make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making all in mmap_vlan_ins make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Making all in pktio_ipc make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[7]: Nothing to be done for 'all-am'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> make[6]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> ============================================================================ Testsuite summary for OpenDataPlane 1.11.0.0 ============================================================================ # TOTAL: 31 # PASS: 28 # SKIP: 2 # XFAIL: 0 # FAIL: 1 # XPASS: 0 # ERROR: 0 ============================================================================ See test/linux-generic/test-suite.log Please report to lng-odp(a)lists.linaro.org ============================================================================ Makefile:838: recipe for target 'test-suite.log' failed make[5]: *** [test-suite.log] Error 1 make[5]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Makefile:944: recipe for target 'check-TESTS' failed make[4]: *** [check-TESTS] Error 2 make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Makefile:1217: recipe for target 'check-am' failed make[3]: *** [check-am] Error 2 make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Makefile:731: recipe for target 'check-recursive' failed make[2]: *** [check-recursive] Error 1 make[2]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Makefile:419: recipe for target 'check-recursive' failed make[1]: *** [check-recursive] Error 1 make[1]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Makefile:477: recipe for target 'check-recursive' failed make: *** [check-recursive] Error 1 + cleanup_exit + isdebug echo 'build: entering function: cleanup_exit()' + '[' 0 -eq 1 ']' + [[ 0 -eq 1 ]] + isdebug echo 'build: exiting function: cleanup_exit()' + '[' 0 -eq 1 ']' + retcode=2 + set -e + '[' -d check-odp/build/odp/testdir/ ']' + mkdir -p out/log + find check-odp/build/odp/testdir/ -type f -name '*.log' -exec cp '{}' out/log ';' + case "${ARCH}" in + case "${label}" in + export ARCH=arm64 + ARCH=arm64 + test -d /home/buildslave/bin + mkdir /home/buildslave/bin + wget https://git.linaro.org/ci/publishing-api.git/blob_plain/HEAD:/linaro-cp.py -O /home/buildslave/bin/linaro-cp.py --2016-11-27 11:30:21-- https://git.linaro.org/ci/publishing-api.git/blob_plain/HEAD:/linaro-cp.py Resolving git.linaro.org (git.linaro.org)... 23.21.56.198 Connecting to git.linaro.org (git.linaro.org)|23.21.56.198|:443... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: https://git.linaro.org/ci/publishing-api.git/plain/linaro-cp.py [following] --2016-11-27 11:30:22-- https://git.linaro.org/ci/publishing-api.git/plain/linaro-cp.py Reusing existing connection to git.linaro.org:443. HTTP request sent, awaiting response... 200 OK Length: 11683 (11K) [text/plain] Saving to: ‘/home/buildslave/bin/linaro-cp.py’ 0K .......... . 100% 21.4M=0.001s 2016-11-27 11:30:22 (21.4 MB/s) - ‘/home/buildslave/bin/linaro-cp.py’ saved [11683/11683] + '[' -d out ']' + PUB_DEST=components/lng/odp/odp-api-check/master/docker-jessie-arm64/arm64/ipc/916 + python /home/buildslave/bin/linaro-cp.py --api_version 3 --link-latest out components/lng/odp/odp-api-check/master/docker-jessie-arm64/arm64/ipc/916 real 0m37.567s user 0m1.568s sys 0m0.168s + echo '***************************' *************************** + echo 'Logs published on http://snapshots.linaro.org/components/lng/odp/odp-api-check/master/docker-…' Logs published on http://snapshots.linaro.org/components/lng/odp/odp-api-check/master/docker-… + echo '***************************' *************************** + cat + '[' 2 -ne 0 ']' + exit 1 Build step 'Execute shell' marked build as failure Skipping publisher since build result is FAILURE [YAD-PLUGIN] Injecting DOCKER_CONTAINER_ID variable. [YAD-PLUGIN] Injecting JENKINS_CLOUD_ID variable. [YAD-PLUGIN] DOCKER_HOST variable.

7 years, 5 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

lng-ci November 2016