See https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/632/

------------------------------------------ [...truncated 892 lines...] ++ [[ = == < ]] ++ SF_CUNIT=http://people.linaro.org/~anders.roxell/CUnit/2.1-3/CUnit-2.1-3.tar.bz2 + source https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/helper/coverity ++ '[' -n '' ']' ++ readonly COVERITY_HELPER=1 ++ COVERITY_HELPER=1 + export success=0 + success=0 + export GIT_BRANCH=next + GIT_BRANCH=next + export CLEANUP=1 + CLEANUP=1 + export LCOV=0 + LCOV=0 + export UNTESTED=0 + UNTESTED=0 ++ getconf _NPROCESSORS_ONLN + export NUM_CPUS=8 + NUM_CPUS=8 + export TEST_LIST= + TEST_LIST= + export M32_ON_64=0 + M32_ON_64=0 + export DOXYGEN_HTML=0 + DOXYGEN_HTML=0 + export USER_HTML=0 + USER_HTML=0 + export SCAN_BUILD=0 + SCAN_BUILD=0 + export CLANG=0 + CLANG=0 + export SPARSE=0 + SPARSE=0 + export QUIET=0 + QUIET=0 + export EXIT_ON_ERROR=1 + EXIT_ON_ERROR=1 + export CPP_TEST=0 + CPP_TEST=0 + export DISTCHECK=0 + DISTCHECK=0 + export INSTALLCHECK=0 + INSTALLCHECK=0 + export DRYRUN=0 + DRYRUN=0 + export BUILD_DEPS=1 + BUILD_DEPS=1 + export RELOCATE_TEST=1 + RELOCATE_TEST=1 + export ENABLE_NETMAP=0 + ENABLE_NETMAP=0 + E_VALGRIND=0 + RUN_VALID_FROM_INSTALL=0 + [[ ! -z '' ]] + export GENERIC_SRCDIR=https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/src/odp + GENERIC_SRCDIR=https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/src/odp + export GENERIC_BUILDDIR=https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/build/odp + GENERIC_BUILDDIR=https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/build/odp + PLATFORM=linux-generic + GPLATFORM=--with-platform=linux-generic + GLOBAL_DSTDIRPATH=https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/new-build + DSTDIR=--prefix=https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/new-build + GENERIC_PUBLISHING=https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/publishing/next + mkdir -p https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/publishing/next + GENERIC_LOGDIR=https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/log/odp-build + LOGFILE_BASENAME=default ++ date +%Y%m%d_%H%M + LOGFILE=https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/log/odp-build/default-20160329_1211 + mkdir -p https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/log/odp-build + trap cleanup_exit INT TERM EXIT + display_os + uniq -u + cat /etc/lsb-release /etc/os-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=14.10 DISTRIB_CODENAME=utopic DISTRIB_DESCRIPTION="Ubuntu 14.10" NAME="Ubuntu" VERSION="14.10 (Utopic Unicorn)" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 14.10" VERSION_ID="14.10" HOME_URL="http://www.ubuntu.com/" SUPPORT_URL="http://help.ubuntu.com/" BUG_REPORT_URL="http://bugs.launchpad.net/ubuntu/" + prepare_platform + export PLATFORM_SHORT=generic + PLATFORM_SHORT=generic + [[ -f https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/helper/platform/generic ]] + source https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/helper/platform/generic ++ '[' -n '' ']' ++ readonly GENERIC_PLATFORM_HELPER=1 ++ GENERIC_PLATFORM_HELPER=1 ++ export NETMAP_SRCDIR=https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/netmap ++ NETMAP_SRCDIR=https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/netmap + generic_prepare + export GIT_URL=git://git.linaro.org/lng/odp.git + GIT_URL=git://git.linaro.org/lng/odp.git + [[ 0 -eq 1 ]] + [[ x = \x-\h ]] + [[ x = \x--\h\e\l\p ]] + getopts hcq opt + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 1 -ge 1 ]] + build_deps + echo 'Preparing platform' Preparing platform + generic_get + [[ 0 -eq 1 ]] + echo 'Preparing toolchain' Preparing toolchain + toolchain_prepare + [[ -z arm ]] + [[ arm == \x\8\6_\3\2 ]] + find_toolchain_to_download + toolchain_url=http://releases.linaro.org/components/toolchain/binaries/5.2-2015.11-2/arm-l... + [[ arm == \a\r\m\e\b ]] + [[ arm == \a\r\m\6\4 ]] + [[ arm == \a\r\m\6\4\b\e ]] + echo http://releases.linaro.org/components/toolchain/binaries/5.2-2015.11-2/arm-l... http://releases.linaro.org/components/toolchain/binaries/5.2-2015.11-2/arm-l... + export tcbindir=/home/buildslave/srv/toolchain/arm-tc-14.09/bin + tcbindir=/home/buildslave/srv/toolchain/arm-tc-14.09/bin ++ dirname /home/buildslave/srv/toolchain/arm-tc-14.09/bin + mkdir -p /home/buildslave/srv/toolchain/arm-tc-14.09 + install_custom_toolchain + test -d /home/buildslave/srv/toolchain/arm-tc-14.09/bin + return 0 + setup_compiler_prefix + export PATH=/home/buildslave/srv/toolchain/arm-tc-14.09/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games + PATH=/home/buildslave/srv/toolchain/arm-tc-14.09/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games + '[' arm = arm ']' + compiler_prefix=arm-linux-gnueabihf + [[ -n arm-linux-gnueabihf ]] + export CROSS_COMPILE=arm-linux-gnueabihf- + CROSS_COMPILE=arm-linux-gnueabihf- + [[ -n arm-linux-gnueabihf ]] + export CROSS_HOST=--host=arm-linux-gnueabihf + CROSS_HOST=--host=arm-linux-gnueabihf + echo 'Building platform' Building platform + dryrun generic_build + [[ 0 -eq 1 ]] + generic_build + : + echo 'Building OpenSSL' Building OpenSSL + dryrun build_openssl + [[ 0 -eq 1 ]] + build_openssl + export OPENSSL_INSTALLDIR=https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/installed/arm/openssl-OpenSSL_1_0_1h + OPENSSL_INSTALLDIR=https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/installed/arm/openssl-OpenSSL_1_0_1h + echo 'Building OpenSSL_1_0_1h' Building OpenSSL_1_0_1h + [[ -n arm ]] + export OPENSSL_BUILD=1 + OPENSSL_BUILD=1 + [[ 1 -ne 1 ]] + export 'CONFIGURE_FLAGS= --enable-test-perf --with-openssl-path=https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/installed/arm/openssl-OpenSSL_1_0_1h' + CONFIGURE_FLAGS=' --enable-test-perf --with-openssl-path=https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/installed/arm/openssl-OpenSSL_1_0_1h' + [[ -f https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/installed/arm/openssl-OpenSSL_1_0_1h/lib/libcrypto.a ]] + [[ -n arm ]] + openssl_build_arch=linux-generic32 + [[ arm == *64* ]] + [[ 0 -eq 1 ]] + openssl_fetch + [[ -d https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/src/openssl ]] + git clone git://git.openssl.org/openssl.git https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/src/openssl + openssl_new_builddir + rm -rf https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/build/openssl + git clone --quiet --depth=1 -b OpenSSL_1_0_1h file:///https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/src/openssl https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/build/openssl + pushd https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/build/openssl + [[ -n arm ]] + CROSS_OPTS=--cross-compile-prefix=arm-linux-gnueabihf- + ./Configure linux-generic32 --cross-compile-prefix=arm-linux-gnueabihf- --prefix=https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/installed/arm/openssl-OpenSSL_1_0_1h shared + make + make install + popd + echo 'Building CUnit' Building CUnit + dryrun build_cunit + [[ 0 -eq 1 ]] + build_cunit + [[ 1 -eq 1 ]] + export 'CONFIGURE_FLAGS= --enable-test-perf --with-openssl-path=https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/installed/arm/openssl-OpenSSL_1_0_1h --enable-test-vald --with-testdir=yes' + CONFIGURE_FLAGS=' --enable-test-perf --with-openssl-path=https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/installed/arm/openssl-OpenSSL_1_0_1h --enable-test-vald --with-testdir=yes' + [[ -n arm ]] + CUNIT_BUILD=1 + [[ 1 -ne 1 ]] + export CUNIT_INSTALLDIR=https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/installed/arm/cunit-2.1-3 + CUNIT_INSTALLDIR=https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/installed/arm/cunit-2.1-3 + echo 'Building CUnit-2.1-3' Building CUnit-2.1-3 + export 'CONFIGURE_FLAGS= --enable-test-perf --with-openssl-path=https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/installed/arm/openssl-OpenSSL_1_0_1h --enable-test-vald --with-testdir=yes --with-cunit-path=https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/installed/arm/cunit-2.1-3' + CONFIGURE_FLAGS=' --enable-test-perf --with-openssl-path=https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/installed/arm/openssl-OpenSSL_1_0_1h --enable-test-vald --with-testdir=yes --with-cunit-path=https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/installed/arm/cunit-2.1-3' + [[ -f https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/installed/arm/cunit-2.1-3/lib/libcunit.a ]] + [[ 0 -eq 1 ]] + cunit_fetch + command -v curl + [[ -d https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/src/cunit-2.1-3 ]] + pushd https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/src + curl -sSOL http://people.linaro.org/~anders.roxell/CUnit/2.1-3/CUnit-2.1-3.tar.bz2 curl: (56) Recv failure: Connection reset by peer + mkdir -p https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/src/cunit-2.1-3 + tar --strip-components=1 -C https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/src/cunit-2.1-3 -jxf '*.bz2' tar (child): *.bz2: Cannot open: No such file or directory tar (child): Error is not recoverable: exiting now tar: Child returned status 2 tar: Error is not recoverable: exiting now + popd + cunit_new_builddir + rm -rf https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/build/cunit + cp -rl https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/src/cunit-2.1-3 https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/build/cunit + pushd https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/build/cunit + [[ -x bootstrap ]] + ./configure --host=arm-linux-gnueabihf --prefix=https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/installed/arm/cunit-2.1-3 + make -j 8 + CUNIT_BUILD_FAILED=1 + tail -n 40 https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/build/cunit/log-build.log https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm,GIT_BRANCH=next,label=docker-utopic/ws/check-odp/helper/cunit: line 48: ./configure: No such file or directory make: *** No targets specified and no makefile found. Stop. + exit 1 + cleanup_exit + [[ 0 -eq 1 ]] + retcode=1 + set -e + '[' -d check-odp/build/odp/testdir/ ']' + test -d /home/buildslave/bin + mkdir /home/buildslave/bin + wget https://git.linaro.org/ci/publishing-api.git/blob_plain/HEAD:/linaro-cp.py -O /home/buildslave/bin/linaro-cp.py --2016-03-29 12:16:25-- https://git.linaro.org/ci/publishing-api.git/blob_plain/HEAD:/linaro-cp.py Resolving git.linaro.org (git.linaro.org)... 54.247.55.40 Connecting to git.linaro.org (git.linaro.org)|54.247.55.40|:443... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/x-python] Saving to: '/home/buildslave/bin/linaro-cp.py'

0K .......... 44.8M=0s

2016-03-29 12:16:25 (44.8 MB/s) - '/home/buildslave/bin/linaro-cp.py' saved [10788]

+ '[' -d out ']' + '[' 1 -ne 0 ']' + exit 1 Build step 'Execute shell' marked build as failure Skipping publisher since build result is FAILURE