Y2038 January 2016

y2038@lists.linaro.org

12 participants
26 discussions

[PATCH 0/7] [media] y2038 conversion for subsystem

by Arnd Bergmann

Hi everyone, This is a conversion of all subsystem-wide v4l2 code to avoid the use of types based on time_t. The first five patches should all be harmless and obvious, so they can get applied for 4.3 after normal review. The last two patches are marked RFC for now because their possible impact on the user space ABI and to decide if this is the best approach or whether we should instead introduce extra code in the kernel to handle modified user space. There are a few device drivers beyond this series that rely on time_t/timeval/timespec internally, but they are all easy to fix and can be taken care of later. Arnd Arnd Bergmann (7): [media] dvb: use ktime_t for internal timeout [media] dvb: remove unused systime() function [media] dvb: don't use 'time_t' in event ioctl [media] exynos4-is: use monotonic timestamps as advertized [media] use v4l2_get_timestamp where possible [RFC] [media]: v4l2: introduce v4l2_timeval [RFC] [media] introduce v4l2_timespec type for timestamps drivers/media/dvb-core/demux.h | 2 +- drivers/media/dvb-core/dmxdev.c | 2 +- drivers/media/dvb-core/dvb_demux.c | 17 ++++++----------- drivers/media/dvb-core/dvb_demux.h | 4 ++-- drivers/media/dvb-core/dvb_net.c | 2 +- drivers/media/dvb-frontends/dibx000_common.c | 10 ---------- drivers/media/dvb-frontends/dibx000_common.h | 2 -- drivers/media/pci/bt8xx/bttv-driver.c | 7 ++----- drivers/media/pci/cx18/cx18-mailbox.c | 2 +- drivers/media/pci/meye/meye.h | 2 +- drivers/media/pci/zoran/zoran.h | 2 +- drivers/media/platform/coda/coda.h | 2 +- drivers/media/platform/exynos4-is/fimc-capture.c | 8 +------- drivers/media/platform/exynos4-is/fimc-lite.c | 7 +------ drivers/media/platform/omap/omap_vout.c | 4 ++-- drivers/media/platform/omap3isp/ispstat.c | 5 ++--- drivers/media/platform/omap3isp/ispstat.h | 2 +- drivers/media/platform/s3c-camif/camif-capture.c | 8 +------- drivers/media/platform/vim2m.c | 2 +- drivers/media/platform/vivid/vivid-ctrls.c | 2 +- drivers/media/usb/cpia2/cpia2.h | 2 +- drivers/media/usb/cpia2/cpia2_v4l.c | 2 +- drivers/media/usb/gspca/gspca.c | 6 +++--- drivers/media/usb/usbvision/usbvision.h | 2 +- drivers/media/v4l2-core/v4l2-common.c | 6 +++--- drivers/media/v4l2-core/v4l2-event.c | 20 +++++++++++++------- drivers/staging/media/omap4iss/iss_video.c | 5 +---- include/media/v4l2-common.h | 2 +- include/media/videobuf-core.h | 2 +- include/trace/events/v4l2.h | 12 ++++++++++-- include/uapi/linux/dvb/video.h | 3 ++- include/uapi/linux/omap3isp.h | 2 +- include/uapi/linux/videodev2.h | 16 ++++++++++++++-- 33 files changed, 79 insertions(+), 93 deletions(-) -- 2.1.0.rc2

7 years, 3 months

[PATCH, RESEND 3] qla2xxx: Remove use of 'struct timeval'

by Arnd Bergmann

From: Tina Ruchandani <ruchandani.tina(a)gmail.com> struct register_host_info stores a 64-bit UTC system time timestamp. This patch removes the use of 'struct timeval' to obtain that timestamp as its tv_sec value will overflow on 32-bit systems in year 2038 beyond. The patch uses ktime_get_real_seconds() which returns a 64-bit seconds value. Signed-off-by: Tina Ruchandani <ruchandani.tina(a)gmail.com> Reviewed-by: Johannes Thumshirn <jthumshirn(a)suse.de> Acked-by: Himanshu Madhani <himanshu.madhani(a)qlogic.com> Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> --- Resent with correct author field and added Ack diff --git a/drivers/scsi/qla2xxx/qla_mr.c b/drivers/scsi/qla2xxx/qla_mr.c index b5029e543b91..15dff7099955 100644 --- a/drivers/scsi/qla2xxx/qla_mr.c +++ b/drivers/scsi/qla2xxx/qla_mr.c @@ -6,6 +6,7 @@ */ #include "qla_def.h" #include <linux/delay.h> +#include <linux/ktime.h> #include <linux/pci.h> #include <linux/ratelimit.h> #include <linux/vmalloc.h> @@ -1812,7 +1813,6 @@ qlafx00_fx_disc(scsi_qla_host_t *vha, fc_port_t *fcport, uint16_t fx_type) struct host_system_info *phost_info; struct register_host_info *preg_hsi; struct new_utsname *p_sysid = NULL; - struct timeval tv; sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL); if (!sp) @@ -1886,8 +1886,7 @@ qlafx00_fx_disc(scsi_qla_host_t *vha, fc_port_t *fcport, uint16_t fx_type) p_sysid->domainname, DOMNAME_LENGTH); strncpy(phost_info->hostdriver, QLA2XXX_VERSION, VERSION_LENGTH); - do_gettimeofday(&tv); - preg_hsi->utc = (uint64_t)tv.tv_sec; + preg_hsi->utc = (uint64_t)ktime_get_real_seconds(); ql_dbg(ql_dbg_init, vha, 0x0149, "ISP%04X: Host registration with firmware\n", ha->pdev->device);

8 years, 8 months

[PATCH] scsi: gdth: replace struct timeval with ktime_get_real_seconds()

by Alison Schofield

struct timeval will overflow on 32-bit systems in y2038. Replace the use of struct timeval and do_gettimeofday() with 64 bit ktime_get_real_seconds. gdth uses the seconds portion of timeval in two places: 1) in an unsigned-32 timestamp field in the ioctl GDTIOCTL_EVENT 2) in an int defined local var to calculate elapsed time for a debug msg Use ktime_get_real_seconds() cast to u32 to extend these fields to y2106. Signed-off-by: Alison Schofield <amsfield22(a)gmail.com> --- drivers/scsi/gdth.c | 8 +++----- drivers/scsi/gdth_proc.c | 5 ++--- 2 files changed, 5 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c index 71e1380..3da4f43 100644 --- a/drivers/scsi/gdth.c +++ b/drivers/scsi/gdth.c @@ -118,6 +118,7 @@ #include <linux/proc_fs.h> #include <linux/time.h> #include <linux/timer.h> +#include <linux/ktime.h> #include <linux/dma-mapping.h> #include <linux/list.h> #include <linux/mutex.h> @@ -2838,7 +2839,6 @@ static gdth_evt_str *gdth_store_event(gdth_ha_str *ha, u16 source, u16 idx, gdth_evt_data *evt) { gdth_evt_str *e; - struct timeval tv; /* no GDTH_LOCK_HA() ! */ TRACE2(("gdth_store_event() source %d idx %d\n", source, idx)); @@ -2854,8 +2854,7 @@ static gdth_evt_str *gdth_store_event(gdth_ha_str *ha, u16 source, !strcmp((char *)&ebuffer[elastidx].event_data.event_string, (char *)&evt->event_string)))) { e = &ebuffer[elastidx]; - do_gettimeofday(&tv); - e->last_stamp = tv.tv_sec; + e->last_stamp = (u32)ktime_get_real_seconds(); ++e->same_count; } else { if (ebuffer[elastidx].event_source != 0) { /* entry not free ? */ @@ -2871,8 +2870,7 @@ static gdth_evt_str *gdth_store_event(gdth_ha_str *ha, u16 source, e = &ebuffer[elastidx]; e->event_source = source; e->event_idx = idx; - do_gettimeofday(&tv); - e->first_stamp = e->last_stamp = tv.tv_sec; + e->first_stamp = e->last_stamp = (u32)ktime_get_real_seconds(); e->same_count = 1; e->event_data = *evt; e->application = 0; diff --git a/drivers/scsi/gdth_proc.c b/drivers/scsi/gdth_proc.c index e66e997..992d325 100644 --- a/drivers/scsi/gdth_proc.c +++ b/drivers/scsi/gdth_proc.c @@ -4,6 +4,7 @@ #include <linux/completion.h> #include <linux/slab.h> +#include <linux/ktime.h> int gdth_set_info(struct Scsi_Host *host, char *buffer, int length) { @@ -148,7 +149,6 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host) gdth_cmd_str *gdtcmd; gdth_evt_str *estr; char hrec[161]; - struct timeval tv; char *buf; gdth_dskstat_str *pds; @@ -540,8 +540,7 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host) if (estr->event_data.eu.driver.ionode == ha->hanum && estr->event_source == ES_ASYNC) { gdth_log_event(&estr->event_data, hrec); - do_gettimeofday(&tv); - sec = (int)(tv.tv_sec - estr->first_stamp); + sec = (int)((u32)ktime_get_real_seconds() - estr->first_stamp); if (sec < 0) sec = 0; seq_printf(m," date- %02d:%02d:%02d\t%s\n", sec/3600, sec%3600/60, sec%60, hrec); -- 2.1.4

8 years, 10 months

[PATCH] isdn: divamnt: use y2038 safe time structures and functions

by Alison Schofield

divamnt stores a start_time at init and uses it to calculate elapsed time. These operations are all internal to divamnt. Address struct timeval overflow on 32-bit systems by replacing: struct timeval with struct timespec64; do_gettimeofday() with getnstimeofday64(); the calculations that yield a safe and normalized elapsed time with timespec64_sub() which provides same. Signed-off-by: Alison Schofield <amsfield22(a)gmail.com> --- drivers/isdn/hardware/eicon/divamnt.c | 35 +++++++++++------------------------ 1 file changed, 11 insertions(+), 24 deletions(-) diff --git a/drivers/isdn/hardware/eicon/divamnt.c b/drivers/isdn/hardware/eicon/divamnt.c index 48db08d..7ac057e 100644 --- a/drivers/isdn/hardware/eicon/divamnt.c +++ b/drivers/isdn/hardware/eicon/divamnt.c @@ -45,7 +45,7 @@ char *DRIVERRELEASE_MNT = "2.0"; static wait_queue_head_t msgwaitq; static unsigned long opened; -static struct timeval start_time; +static struct timespec64 start_time; extern int mntfunc_init(int *, void **, unsigned long); extern void mntfunc_finit(void); @@ -88,28 +88,15 @@ int diva_os_copy_from_user(void *os_handle, void *dst, const void __user *src, */ void diva_os_get_time(dword *sec, dword *usec) { - struct timeval tv; - - do_gettimeofday(&tv); - - if (tv.tv_sec > start_time.tv_sec) { - if (start_time.tv_usec > tv.tv_usec) { - tv.tv_sec--; - tv.tv_usec += 1000000; - } - *sec = (dword) (tv.tv_sec - start_time.tv_sec); - *usec = (dword) (tv.tv_usec - start_time.tv_usec); - } else if (tv.tv_sec == start_time.tv_sec) { - *sec = 0; - if (start_time.tv_usec < tv.tv_usec) { - *usec = (dword) (tv.tv_usec - start_time.tv_usec); - } else { - *usec = 0; - } - } else { - *sec = (dword) tv.tv_sec; - *usec = (dword) tv.tv_usec; - } + struct timespec64 curr_time; + struct timespec64 delta; + + getnstimeofday64(&curr_time); + + delta = timespec64_sub(curr_time, start_time); + + *sec = (dword) delta.tv_sec; + *usec = (dword) (delta.tv_nsec / NSEC_PER_USEC); } /* @@ -213,7 +200,7 @@ static int __init maint_init(void) int ret = 0; void *buffer = NULL; - do_gettimeofday(&start_time); + getnstimeofday64(&start_time); init_waitqueue_head(&msgwaitq); printk(KERN_INFO "%s\n", DRIVERNAME); -- 2.1.4

8 years, 10 months

[PATCH v2] net: hamradio: baycom_ser_fdx: Replace timeval with timespec64

by Amitoj Kaur Chawla

32 bit systems using 'struct timeval' will break in the year 2038, so we replace the code appropriately. However, this driver is not broken in 2038 since we are only using microseconds portion of the time This patch replaces 'struct timeval' with 'struct timespec64'. We only need to find elapsed microseconds rather than absolute time, so it's better to use monotonic time, so using ktime_get_ts64() makes the code more efficient and more robust against concurrent settimeofday() calls. Signed-off-by: Amitoj Kaur Chawla <amitoj1606(a)gmail.com> --- Changes in v2: -Changed to monotonic time -Modified commit message drivers/net/hamradio/baycom_ser_fdx.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/net/hamradio/baycom_ser_fdx.c b/drivers/net/hamradio/baycom_ser_fdx.c index 636b65c..7b916d5 100644 --- a/drivers/net/hamradio/baycom_ser_fdx.c +++ b/drivers/net/hamradio/baycom_ser_fdx.c @@ -80,6 +80,7 @@ #include <linux/hdlcdrv.h> #include <linux/baycom.h> #include <linux/jiffies.h> +#include <linux/time64.h> #include <asm/uaccess.h> #include <asm/io.h> @@ -228,14 +229,15 @@ static inline unsigned int hweight8(unsigned int w) /* --------------------------------------------------------------------- */ -static __inline__ void ser12_rx(struct net_device *dev, struct baycom_state *bc, struct timeval *tv, unsigned char curs) +static __inline__ void ser12_rx(struct net_device *dev, struct baycom_state *bc, struct timespec64 *ts, unsigned char curs) { int timediff; int bdus8 = bc->baud_us >> 3; int bdus4 = bc->baud_us >> 2; int bdus2 = bc->baud_us >> 1; - timediff = 1000000 + tv->tv_usec - bc->modem.ser12.pll_time; + timediff = 1000000 + ts->tv_nsec / NSEC_PER_USEC - + bc->modem.ser12.pll_time; while (timediff >= 500000) timediff -= 1000000; while (timediff >= bdus2) { @@ -287,7 +289,7 @@ static irqreturn_t ser12_interrupt(int irq, void *dev_id) { struct net_device *dev = (struct net_device *)dev_id; struct baycom_state *bc = netdev_priv(dev); - struct timeval tv; + struct timespec64 ts; unsigned char iir, msr; unsigned int txcount = 0; @@ -297,7 +299,7 @@ static irqreturn_t ser12_interrupt(int irq, void *dev_id) if ((iir = inb(IIR(dev->base_addr))) & 1) return IRQ_NONE; /* get current time */ - do_gettimeofday(&tv); + ktime_get_ts64(&ts); msr = inb(MSR(dev->base_addr)); /* delta DCD */ if ((msr & 8) && bc->opt_dcd) @@ -340,7 +342,7 @@ static irqreturn_t ser12_interrupt(int irq, void *dev_id) } iir = inb(IIR(dev->base_addr)); } while (!(iir & 1)); - ser12_rx(dev, bc, &tv, msr & 0x10); /* CTS */ + ser12_rx(dev, bc, &ts, msr & 0x10); /* CTS */ if (bc->modem.ptt && txcount) { if (bc->modem.ser12.txshreg <= 1) { bc->modem.ser12.txshreg = 0x10000 | hdlcdrv_getbits(&bc->hdrv); -- 1.9.1

8 years, 10 months

[PATCH v3] misc: ibmasm: Replace timeval with timespec64

by Amitoj Kaur Chawla

This patch replaces timeval with timespec64 as 32 bit 'struct timeval' will not give current time beyond 2038. The patch changes the code to use ktime_get_real_ts64() which returns a 'struct timespec64' instead of do_gettimeofday() which returns a 'struct timeval' This patch also alters the format strings in sprintf() for now.tv_sec and now.tv_nsec to incorporate 'long long' on 32 bit architectures and leading zeroes respectively. Signed-off-by: Amitoj Kaur Chawla <amitoj1606(a)gmail.com> Reviewed-by: Arnd Bergmann <arnd(a)arndb.de> --- Changes in v2: -change format string of now.tv_sec to '%llu' -change format string of now.tv_nsec to '%.08lu' Changes in v3: -Replace tv_usec with tv_nsec, error made in v2 -Build tested drivers/misc/ibmasm/ibmasm.h | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/misc/ibmasm/ibmasm.h b/drivers/misc/ibmasm/ibmasm.h index 9b08344..82380ae 100644 --- a/drivers/misc/ibmasm/ibmasm.h +++ b/drivers/misc/ibmasm/ibmasm.h @@ -34,6 +34,7 @@ #include <linux/kref.h> #include <linux/device.h> #include <linux/input.h> +#include <linux/time64.h> /* Driver identification */ #define DRIVER_NAME "ibmasm" @@ -53,9 +54,10 @@ extern int ibmasm_debug; static inline char *get_timestamp(char *buf) { - struct timeval now; - do_gettimeofday(&now); - sprintf(buf, "%lu.%lu", now.tv_sec, now.tv_usec); + struct timespec64 now; + ktime_get_real_ts64(&now); + sprintf(buf, "%llu.%.08lu", (long long)now.tv_sec, + now.tv_nsec / NSEC_PER_USEC); return buf; } -- 1.9.1

8 years, 10 months

You have received a new fax, document 000948965

by Interfax

A new fax document for you. Please check your fax document in the attachment to this e-mail. Scanned at: Thu, 28 Jan 2016 01:51:32 +0300 Pages scanned: 7 Quality: 100 DPI File size: 216 Kb Sender: Matthew Novak Scan time: 6 seconds Filename: scanned.000948965.doc Thanks for choosing Interfax!

8 years, 10 months

Re: [Y2038] [RFC 02/15] vfs: Change all structures to support 64 bit time

by Deepa Dinamani

Based on the discussion, here is how I propose to proceed: 1. Series for timestamp range check and clamping 2. Bug fixing patches like change all CURRENT_TIME use cases to current_fs_time() 3. Patches for vfs to use timespec64 internally (maybe a series, if required) 4. Patches that change all fs that use vfs APIs using timestamp arguments (not a series) 5. Change individual fs to use timespec64 (not a series) 6. Change back whatever time conversion APIs left in vfs or individual fs (maybe a series, if required) So, I don't see a need for submitting another series as all the changes now are handled on a case by case basis and no longer have a generic theme. If everyone's in sync then I can proceed with the above plan. -Deepa

8 years, 11 months

[PATCH, RESEND 2] qla2xxx: Remove use of 'struct timeval'

by Arnd Bergmann

struct register_host_info stores a 64-bit UTC system time timestamp. This patch removes the use of 'struct timeval' to obtain that timestamp as its tv_sec value will overflow on 32-bit systems in year 2038 beyond. The patch uses ktime_get_real_seconds() which returns a 64-bit seconds value. Signed-off-by: Tina Ruchandani <ruchandani.tina(a)gmail.com> Reviewed-by: Johannes Thumshirn <jthumshirn(a)suse.de> Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> diff --git a/drivers/scsi/qla2xxx/qla_mr.c b/drivers/scsi/qla2xxx/qla_mr.c index b5029e543b91..15dff7099955 100644 --- a/drivers/scsi/qla2xxx/qla_mr.c +++ b/drivers/scsi/qla2xxx/qla_mr.c @@ -6,6 +6,7 @@ */ #include "qla_def.h" #include <linux/delay.h> +#include <linux/ktime.h> #include <linux/pci.h> #include <linux/ratelimit.h> #include <linux/vmalloc.h> @@ -1812,7 +1813,6 @@ qlafx00_fx_disc(scsi_qla_host_t *vha, fc_port_t *fcport, uint16_t fx_type) struct host_system_info *phost_info; struct register_host_info *preg_hsi; struct new_utsname *p_sysid = NULL; - struct timeval tv; sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL); if (!sp) @@ -1886,8 +1886,7 @@ qlafx00_fx_disc(scsi_qla_host_t *vha, fc_port_t *fcport, uint16_t fx_type) p_sysid->domainname, DOMNAME_LENGTH); strncpy(phost_info->hostdriver, QLA2XXX_VERSION, VERSION_LENGTH); - do_gettimeofday(&tv); - preg_hsi->utc = (uint64_t)tv.tv_sec; + preg_hsi->utc = (uint64_t)ktime_get_real_seconds(); ql_dbg(ql_dbg_init, vha, 0x0149, "ISP%04X: Host registration with firmware\n", ha->pdev->device);

8 years, 11 months

You have 1 new fax, document 000657670

by Interfax Service

New incoming fax document. Please, download fax document attached to this email. Filesize: 235 Kb Filename: document-000657670.doc Scanned: Sun, 24 Jan 2016 07:21:50 +0300 From: Vincent Stein Pages number: 13 Scan quality: 400 DPI Scanned in: 47 seconds Thank you for using Interfax!

8 years, 11 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

Y2038 January 2016