Y2038 February 2017

y2038@lists.linaro.org

9 participants
6 discussions

[PATCH v3] generic/390: Add tests for inode timestamp policy

by Deepa Dinamani

The test helps to validate clamping and mount behaviors according to supported file system timestamp ranges. Note that the test can fail on 32-bit systems for a few file systems. This will be corrected when vfs is transitioned to use 64-bit timestamps. Signed-off-by: Deepa Dinamani <deepa.kernel(a)gmail.com> --- The branch of the kernel tree can be located at https://github.com/deepa-hub/vfs refs/heads/vfs_timestamp_policy The xfs_io patch to add utimes is at https://www.spinics.net/lists/linux-xfs/msg02952.html Changes since v2: * Refactored notrun handling * Updated comments Changes since v1: * Use xfs_io utimes command * Updated error handling * Reorganized code according to review comments common/rc | 48 +++++++++++++ tests/generic/390 | 192 ++++++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/390.out | 2 + tests/generic/group | 1 + 4 files changed, 243 insertions(+) create mode 100755 tests/generic/390 create mode 100644 tests/generic/390.out diff --git a/common/rc b/common/rc index e3b54ec..17f025e 100644 --- a/common/rc +++ b/common/rc @@ -1960,6 +1960,51 @@ _run_aiodio() return $status } +# this test requires y2038 sysfs switch and filesystem +# timestamp ranges support. +_require_y2038() +{ + local device=${1:-$TEST_DEV} + local sysfsdir=/proc/sys/fs/fs-timestamp-check-on + + if [ ! -e $sysfsdir ]; then + _notrun "no kernel support for y2038 sysfs switch" + fi + + local tsmin tsmax + read tsmin tsmax <<<$(_filesystem_timestamp_range $device) + if [ $tsmin -eq -1 -a $tsmax -eq -1 ]; then + _notrun "filesystem $FSTYP timestamp bounds are unknown" + fi +} + +_filesystem_timestamp_range() +{ + device=${1:-$TEST_DEV} + case $FSTYP in + ext4) + if [ $(dumpe2fs -h $device 2>/dev/null | grep "Inode size:" | cut -d: -f2) -gt 128 ]; then + echo "-2147483648 15032385535" + else + echo "-2147483648 2147483647" + fi + ;; + + xfs) + echo "-2147483648 2147483647" + ;; + jfs) + echo "0 4294967295" + ;; + f2fs) + echo "-2147483648 2147483647" + ;; + *) + echo "-1 -1" + ;; + esac +} + # indicate whether YP/NIS is active or not # _yp_active() @@ -2070,6 +2115,9 @@ _require_xfs_io_command() echo $testio | egrep -q "Inappropriate ioctl" && \ _notrun "xfs_io $command support is missing" ;; + "utimes" ) + testio=`$XFS_IO_PROG -f -c "utimes" 0 0 0 0 $testfile 2>&1` + ;; *) testio=`$XFS_IO_PROG -c "$command help" 2>&1` esac diff --git a/tests/generic/390 b/tests/generic/390 new file mode 100755 index 0000000..f68b931 --- /dev/null +++ b/tests/generic/390 @@ -0,0 +1,192 @@ +#! /bin/bash +# FS QA Test 390 +# +# Tests to verify policy for filesystem timestamps for +# supported ranges: +# 1. Verify filesystem rw mount according to sysctl +# timestamp_supported. +# 2. Verify timestamp clamping for timestamps beyond max +# timestamp supported. +# +# Exit status 1: either or both tests above fail. +# Exit status 0: both the above tests pass. +# +#----------------------------------------------------------------------- +# Copyright (c) 2016 Deepa Dinamani. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "exit \$status" 0 1 2 3 15 + +# Get standard environment, filters and checks. +. ./common/rc +. ./common/filter +. ./common/attr + +# remove previous $seqres.full before test +rm -f $seqres.full + +# Prerequisites for the test run. +_supported_fs generic +_supported_os Linux +_require_scratch +_require_xfs_io_command utimes + +# Compare file timestamps obtained from stat +# with a given timestamp. +check_stat() +{ + file=$1 + timestamp=$2 + + stat_timestamp=`stat -c"%X;%Y" $file` + + prev_timestamp="$timestamp;$timestamp" + if [ $prev_timestamp != $stat_timestamp ]; then + echo "$prev_timestamp != $stat_timestamp" | tee -a $seqres.full + fi +} + +run_test_individual() +{ + file=$1 + timestamp=$2 + update_time=$3 + + #check if the time needs update + if [ $update_time -eq 1 ]; then + echo "Updating file: $file to timestamp `date -d @$timestamp`" >> $seqres.full + $XFS_IO_PROG -f -c "utimes $timestamp 0 $timestamp 0" $file + if [ $? -ne 0 ]; then + echo "Failed to update times on $file" | tee -a $seqres.full + fi + fi + + tsclamp=$(($timestamp>$tsmax?$tsmax:$timestamp)) + echo "Checking file: $file Updated timestamp is `date -d @$tsclamp`" >> $seqres.full + check_stat $file $tsclamp +} + +run_test() +{ + update_time=$1 + + n=1 + + for TIME in "${TIMESTAMPS[@]}" + do + #Run the test + run_test_individual ${SCRATCH_MNT}/test_$n $TIME $update_time + + #update iterator + ((n++)) + done +} + +_scratch_mkfs &>> $seqres.full 2>&1 || _fail "mkfs failed" +_require_y2038 $SCRATCH_DEV + +read tsmin tsmax <<<$(_filesystem_timestamp_range $SCRATCH_DEV) +echo min supported timestamp $tsmin $(date --date=@$tsmin) >> $seqres.full +echo max supported timestamp $tsmax $(date --date=@$tsmax) >> $seqres.full + +# Test timestamps array + +declare -a TIMESTAMPS=( + $tsmin + 0 + $tsmax + $((tsmax+1)) + 4294967295 + 8589934591 + 34359738367 +) + +# Max timestamp is hardcoded to Mon Jan 18 19:14:07 PST 2038 +sys_tsmax=2147483647 +echo "max timestamp that needs to be supported by fs for rw mount is" \ + "$((sys_tsmax+1)) $(date --date=@$((sys_tsmax+1)))" >> $seqres.full + +read ts_check <<<$(cat /proc/sys/fs/fs-timestamp-check-on) + +_scratch_mount +result=$? + +if [ $ts_check -ne 0 ]; then + echo "sysctl filesystem timestamp check is on" >> $seqres.full + # check for mount failure if the minimum requirement for max timestamp + # supported is not met. + if [ $sys_tsmax -ge $tsmax ]; then + if [ $result -eq 0 ]; then + echo "mount test failed" | tee -a $seqres.full + exit + fi + else + if [ $result -ne 0 ]; then + echo "failed to mount $SCRATCH_DEV" | tee -a $seqres.full + exit + fi + fi +else + # if sysctl switch is off then mount should succeed always. + echo "sysctl filesystem timestamp check is off" >> $seqres.full + if [ $result -ne 0 ]; then + echo "failed to mount $SCRATCH_DEV and timestamp check is off" >> $seqres.full + exit + fi +fi + +# Begin test case 1 +echo "In memory timestamps update test start" >> $seqres.full + +# update time on the file +update_time=1 + +run_test $update_time + +echo "In memory timestamps update complete" >> $seqres.full + +echo "Unmounting and mounting scratch $SCRATCH_MNT" >> $seqres.full + +# unmount and remount $SCRATCH_DEV +_scratch_cycle_mount + +# Begin test case 2 + +n=1 + +# Do not update time on the file this time, just read from disk +update_time=0 + +echo "On disk timestamps update test start" >> $seqres.full + +# Re-run test +run_test $update_time + +echo "On disk timestamps update test complete" >> $seqres.full + +echo "y2038 inode timestamp tests completed successfully" + +# success, all done +status=0 +exit diff --git a/tests/generic/390.out b/tests/generic/390.out new file mode 100644 index 0000000..82bd4eb --- /dev/null +++ b/tests/generic/390.out @@ -0,0 +1,2 @@ +QA output created by 390 +y2038 inode timestamp tests completed successfully diff --git a/tests/generic/group b/tests/generic/group index 08007d7..d137d01 100644 --- a/tests/generic/group +++ b/tests/generic/group @@ -392,3 +392,4 @@ 387 auto clone 388 auto log metadata 389 auto quick acl +390 auto quick rw -- 2.7.4

4 years, 12 months

[PATCH 0/7] [media] y2038 conversion for subsystem

by Arnd Bergmann

Hi everyone, This is a conversion of all subsystem-wide v4l2 code to avoid the use of types based on time_t. The first five patches should all be harmless and obvious, so they can get applied for 4.3 after normal review. The last two patches are marked RFC for now because their possible impact on the user space ABI and to decide if this is the best approach or whether we should instead introduce extra code in the kernel to handle modified user space. There are a few device drivers beyond this series that rely on time_t/timeval/timespec internally, but they are all easy to fix and can be taken care of later. Arnd Arnd Bergmann (7): [media] dvb: use ktime_t for internal timeout [media] dvb: remove unused systime() function [media] dvb: don't use 'time_t' in event ioctl [media] exynos4-is: use monotonic timestamps as advertized [media] use v4l2_get_timestamp where possible [RFC] [media]: v4l2: introduce v4l2_timeval [RFC] [media] introduce v4l2_timespec type for timestamps drivers/media/dvb-core/demux.h | 2 +- drivers/media/dvb-core/dmxdev.c | 2 +- drivers/media/dvb-core/dvb_demux.c | 17 ++++++----------- drivers/media/dvb-core/dvb_demux.h | 4 ++-- drivers/media/dvb-core/dvb_net.c | 2 +- drivers/media/dvb-frontends/dibx000_common.c | 10 ---------- drivers/media/dvb-frontends/dibx000_common.h | 2 -- drivers/media/pci/bt8xx/bttv-driver.c | 7 ++----- drivers/media/pci/cx18/cx18-mailbox.c | 2 +- drivers/media/pci/meye/meye.h | 2 +- drivers/media/pci/zoran/zoran.h | 2 +- drivers/media/platform/coda/coda.h | 2 +- drivers/media/platform/exynos4-is/fimc-capture.c | 8 +------- drivers/media/platform/exynos4-is/fimc-lite.c | 7 +------ drivers/media/platform/omap/omap_vout.c | 4 ++-- drivers/media/platform/omap3isp/ispstat.c | 5 ++--- drivers/media/platform/omap3isp/ispstat.h | 2 +- drivers/media/platform/s3c-camif/camif-capture.c | 8 +------- drivers/media/platform/vim2m.c | 2 +- drivers/media/platform/vivid/vivid-ctrls.c | 2 +- drivers/media/usb/cpia2/cpia2.h | 2 +- drivers/media/usb/cpia2/cpia2_v4l.c | 2 +- drivers/media/usb/gspca/gspca.c | 6 +++--- drivers/media/usb/usbvision/usbvision.h | 2 +- drivers/media/v4l2-core/v4l2-common.c | 6 +++--- drivers/media/v4l2-core/v4l2-event.c | 20 +++++++++++++------- drivers/staging/media/omap4iss/iss_video.c | 5 +---- include/media/v4l2-common.h | 2 +- include/media/videobuf-core.h | 2 +- include/trace/events/v4l2.h | 12 ++++++++++-- include/uapi/linux/dvb/video.h | 3 ++- include/uapi/linux/omap3isp.h | 2 +- include/uapi/linux/videodev2.h | 16 ++++++++++++++-- 33 files changed, 79 insertions(+), 93 deletions(-) -- 2.1.0.rc2

6 years, 7 months

Re: [Y2038] Fifth draft of the Y2038 design document

by Arnd Bergmann

On Wed, Feb 22, 2017 at 9:05 AM, Albert ARIBAUD <albert.aribaud(a)3adev.fr> wrote: > Hi all, > > I have produced a fifth draft of what will eventually become the Y2038 > design document: > > https://sourceware.org/glibc/wiki/Y2038ProofnessDesign?rev=115 > > Relative to the previous draft: > > * It makes explicit that the implementation should allow the same > application source code to build unchanged whether the default for > time size is 32-bit (_TIME_BITS undefined or unequal to 64) or > 64-bit (_TIME_BITS defined equal to 64). > > * Security issues considerations have been added (thanks to Carlos > O'Donnel). > > * Timestamps and IOCTLs sections have been expanded. > > * Implementation examples for types has been added. > > * Implementation examples for APIs has been added. > > As always, comments welcome. I found a few minor inaccuracies: You have classified sched_rr_get_interval() as y2038-compatible, but getrusage() as incompatible. I think these are both in one category, either incompatible or a third category: we pass only intervals here, so there won't be an overflow but redefining timeval still results in an incompatible ABI, unless the structures are redefined in terms of 32-bit types instead of time_t/timeval/timespec. I've discussed the kernel side for "Y2038-incompatible socket timestamping" with Deep a while ago, and I think we came to a new conclusions for what would be the best approach. I'll let her comment here. For "Y2038-compatible types", please clarify whether time32_t and time64_t (and related types) are internal-only types or visible to applications through header files. I assume they are internal only, but it is not 100% clear. Related to that, what is the expected definition of time32_t on architectures that never had a 32-bit time_t, such as existing 64-bit architectures? Is it left undefined and all code referring to time32_t compiled conditionally? In "Y2038-compatible struct timespec", replace "microseconds" with "nanoseconds. Also, it's worth pointing out the known problems with the padding: - on big-endian systems, any code doing a variation of "struct timespec ts = { seconds, nanos };" is broken because it assigns the nanoseconds to the wrong struct member. The example code is nonconforming as neither POSIX nor C11 require a particular order of the struct members, but I could also easily find examples of existing programs doing this. Note that NetBSD, OpenBSD and Windows have no padding but do use 64-bit time_t. - If the padding is uninitialized, we have to explicitly zero it before calling a kernel function that assumes the 64-bit layout. This can be done in glibc before calling into the kernel, or at the kernel entry (where my last patch set does it), but it is awkward either way. Unfortunately, there doesn't seem to be a good solution here for either of the two problems. Maybe someone else has more ideas. Using a pointer type for the padding would at least cause a compile-time warning for broken code, other solutions might require GCC extensions or break C11 in another way. I'll comment on the kernel/glibc incompatibilities section tomorrow, need to collect my thoughts there some more. Arnd

7 years, 1 month

[PATCH v4 0/5] vfs: Add timestamp range check support

by Deepa Dinamani

The series is aimed at adding timestamp checking and policy related to it to vfs. The series was developed with discussions and guidance from Arnd Bergmann. The original thread is at https://lkml.org/lkml/2016/11/2/294 Associated test: xfstests generic/402 Note that the above test will be run and will fail all filesystems that do not have correct limits specified in the xfstests or the kernel or that don't support times beyond the test dates. I will be submitting a follow up xfstest and kernel patches to update all filesystems. Currently ext4 is the only filesystem that reflects correct limits. The branch is available at https://github.com/deepa-hub/vfs.git refs/heads/vfs_timestamp_policy Changes since v3: * Remove redundant initializations in libfs.c * Change early_param to __setup similar to other root mount options. * Fix documentation warning Changes since v2: * Introduce early boot param override for checks. * Drop afs patch for timestamp limits. Changes since v1: * return EROFS on mount errors * fix mtime copy/paste error in utimes Deepa Dinamani (5): vfs: Add file timestamp range support vfs: Add checks for filesystem timestamp limits ext4: Initialize timestamps limits vfs: Add timestamp_truncate() api utimes: Clamp the timestamps before update fs/ext4/ext4.h | 4 ++++ fs/ext4/super.c | 7 ++++++- fs/inode.c | 47 ++++++++++++++++++++++++++++++++++++++++++++++- fs/internal.h | 2 ++ fs/namespace.c | 12 ++++++++++++ fs/super.c | 9 +++++++++ fs/utimes.c | 17 +++++++++++++---- include/linux/fs.h | 4 ++++ include/linux/time64.h | 6 ++++++ include/uapi/linux/fs.h | 6 +++++- kernel/sysctl.c | 7 +++++++ 11 files changed, 114 insertions(+), 7 deletions(-) -- 2.7.4

7 years, 1 month

Problem with parcel shipping, ID:05016501

by z156644＠srv045.infobox.ru

Dear Customer, Your parcel was successfully delivered February 21 to UPS Station, but our courier cound not contact you. You can find more details in this e-mail attachment! With thanks and appreciation, Isaac Edwards, UPS Parcels Delivery Manager.

7 years, 1 month

[PATCH v3 0/5] vfs: Add timestamp range check support

by Deepa Dinamani

The series is aimed at adding timestamp checking and policy related to it to vfs. The series was developed with discussions and guidance from Arnd Bergmann. The original thread is at https://lkml.org/lkml/2016/11/2/294 Associated test: xfstests generic/402 Note that the above test will be run and will fail all filesystems that do not have correct limits specified in the xfstests or the kernel or that don't support times beyond the test dates. I will be submitting a follow up xfstest and kernel patches to update all filesystems. Currently ext4 is the only filesystem that reflects correct limits. The branch is available at https://github.com/deepa-hub/vfs.git refs/heads/vfs_timestamp_policy Changes since v2: * Introduce early boot param override for checks. * Drop afs patch for timestamp limits. Changes since v1: * return EROFS on mount errors * fix mtime copy/paste error in utimes Deepa Dinamani (5): vfs: Add file timestamp range support vfs: Add checks for filesystem timestamp limits ext4: Initialize timestamps limits vfs: Add timestamp_truncate() api utimes: Clamp the timestamps before update fs/ext4/ext4.h | 4 ++++ fs/ext4/super.c | 7 ++++++- fs/inode.c | 45 ++++++++++++++++++++++++++++++++++++++++++++- fs/internal.h | 2 ++ fs/libfs.c | 4 ++++ fs/namespace.c | 12 ++++++++++++ fs/super.c | 9 +++++++++ fs/utimes.c | 17 +++++++++++++---- include/linux/fs.h | 4 ++++ include/linux/time64.h | 6 ++++++ include/uapi/linux/fs.h | 6 +++++- kernel/sysctl.c | 7 +++++++ 12 files changed, 116 insertions(+), 7 deletions(-) -- 2.7.4 Cc: "Theodore Ts'o" <tytso(a)mit.edu> Cc: Andreas Dilger <adilger.kernel(a)dilger.ca> Cc: linux-ext4(a)vger.kernel.org

7 years, 2 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

Y2038 February 2017