Y2038 November 2018

y2038@lists.linaro.org

14 participants
23 discussions

[PATCH v3] generic/390: Add tests for inode timestamp policy

by Deepa Dinamani

The test helps to validate clamping and mount behaviors according to supported file system timestamp ranges. Note that the test can fail on 32-bit systems for a few file systems. This will be corrected when vfs is transitioned to use 64-bit timestamps. Signed-off-by: Deepa Dinamani <deepa.kernel(a)gmail.com> --- The branch of the kernel tree can be located at https://github.com/deepa-hub/vfs refs/heads/vfs_timestamp_policy The xfs_io patch to add utimes is at https://www.spinics.net/lists/linux-xfs/msg02952.html Changes since v2: * Refactored notrun handling * Updated comments Changes since v1: * Use xfs_io utimes command * Updated error handling * Reorganized code according to review comments common/rc | 48 +++++++++++++ tests/generic/390 | 192 ++++++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/390.out | 2 + tests/generic/group | 1 + 4 files changed, 243 insertions(+) create mode 100755 tests/generic/390 create mode 100644 tests/generic/390.out diff --git a/common/rc b/common/rc index e3b54ec..17f025e 100644 --- a/common/rc +++ b/common/rc @@ -1960,6 +1960,51 @@ _run_aiodio() return $status } +# this test requires y2038 sysfs switch and filesystem +# timestamp ranges support. +_require_y2038() +{ + local device=${1:-$TEST_DEV} + local sysfsdir=/proc/sys/fs/fs-timestamp-check-on + + if [ ! -e $sysfsdir ]; then + _notrun "no kernel support for y2038 sysfs switch" + fi + + local tsmin tsmax + read tsmin tsmax <<<$(_filesystem_timestamp_range $device) + if [ $tsmin -eq -1 -a $tsmax -eq -1 ]; then + _notrun "filesystem $FSTYP timestamp bounds are unknown" + fi +} + +_filesystem_timestamp_range() +{ + device=${1:-$TEST_DEV} + case $FSTYP in + ext4) + if [ $(dumpe2fs -h $device 2>/dev/null | grep "Inode size:" | cut -d: -f2) -gt 128 ]; then + echo "-2147483648 15032385535" + else + echo "-2147483648 2147483647" + fi + ;; + + xfs) + echo "-2147483648 2147483647" + ;; + jfs) + echo "0 4294967295" + ;; + f2fs) + echo "-2147483648 2147483647" + ;; + *) + echo "-1 -1" + ;; + esac +} + # indicate whether YP/NIS is active or not # _yp_active() @@ -2070,6 +2115,9 @@ _require_xfs_io_command() echo $testio | egrep -q "Inappropriate ioctl" && \ _notrun "xfs_io $command support is missing" ;; + "utimes" ) + testio=`$XFS_IO_PROG -f -c "utimes" 0 0 0 0 $testfile 2>&1` + ;; *) testio=`$XFS_IO_PROG -c "$command help" 2>&1` esac diff --git a/tests/generic/390 b/tests/generic/390 new file mode 100755 index 0000000..f68b931 --- /dev/null +++ b/tests/generic/390 @@ -0,0 +1,192 @@ +#! /bin/bash +# FS QA Test 390 +# +# Tests to verify policy for filesystem timestamps for +# supported ranges: +# 1. Verify filesystem rw mount according to sysctl +# timestamp_supported. +# 2. Verify timestamp clamping for timestamps beyond max +# timestamp supported. +# +# Exit status 1: either or both tests above fail. +# Exit status 0: both the above tests pass. +# +#----------------------------------------------------------------------- +# Copyright (c) 2016 Deepa Dinamani. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "exit \$status" 0 1 2 3 15 + +# Get standard environment, filters and checks. +. ./common/rc +. ./common/filter +. ./common/attr + +# remove previous $seqres.full before test +rm -f $seqres.full + +# Prerequisites for the test run. +_supported_fs generic +_supported_os Linux +_require_scratch +_require_xfs_io_command utimes + +# Compare file timestamps obtained from stat +# with a given timestamp. +check_stat() +{ + file=$1 + timestamp=$2 + + stat_timestamp=`stat -c"%X;%Y" $file` + + prev_timestamp="$timestamp;$timestamp" + if [ $prev_timestamp != $stat_timestamp ]; then + echo "$prev_timestamp != $stat_timestamp" | tee -a $seqres.full + fi +} + +run_test_individual() +{ + file=$1 + timestamp=$2 + update_time=$3 + + #check if the time needs update + if [ $update_time -eq 1 ]; then + echo "Updating file: $file to timestamp `date -d @$timestamp`" >> $seqres.full + $XFS_IO_PROG -f -c "utimes $timestamp 0 $timestamp 0" $file + if [ $? -ne 0 ]; then + echo "Failed to update times on $file" | tee -a $seqres.full + fi + fi + + tsclamp=$(($timestamp>$tsmax?$tsmax:$timestamp)) + echo "Checking file: $file Updated timestamp is `date -d @$tsclamp`" >> $seqres.full + check_stat $file $tsclamp +} + +run_test() +{ + update_time=$1 + + n=1 + + for TIME in "${TIMESTAMPS[@]}" + do + #Run the test + run_test_individual ${SCRATCH_MNT}/test_$n $TIME $update_time + + #update iterator + ((n++)) + done +} + +_scratch_mkfs &>> $seqres.full 2>&1 || _fail "mkfs failed" +_require_y2038 $SCRATCH_DEV + +read tsmin tsmax <<<$(_filesystem_timestamp_range $SCRATCH_DEV) +echo min supported timestamp $tsmin $(date --date=@$tsmin) >> $seqres.full +echo max supported timestamp $tsmax $(date --date=@$tsmax) >> $seqres.full + +# Test timestamps array + +declare -a TIMESTAMPS=( + $tsmin + 0 + $tsmax + $((tsmax+1)) + 4294967295 + 8589934591 + 34359738367 +) + +# Max timestamp is hardcoded to Mon Jan 18 19:14:07 PST 2038 +sys_tsmax=2147483647 +echo "max timestamp that needs to be supported by fs for rw mount is" \ + "$((sys_tsmax+1)) $(date --date=@$((sys_tsmax+1)))" >> $seqres.full + +read ts_check <<<$(cat /proc/sys/fs/fs-timestamp-check-on) + +_scratch_mount +result=$? + +if [ $ts_check -ne 0 ]; then + echo "sysctl filesystem timestamp check is on" >> $seqres.full + # check for mount failure if the minimum requirement for max timestamp + # supported is not met. + if [ $sys_tsmax -ge $tsmax ]; then + if [ $result -eq 0 ]; then + echo "mount test failed" | tee -a $seqres.full + exit + fi + else + if [ $result -ne 0 ]; then + echo "failed to mount $SCRATCH_DEV" | tee -a $seqres.full + exit + fi + fi +else + # if sysctl switch is off then mount should succeed always. + echo "sysctl filesystem timestamp check is off" >> $seqres.full + if [ $result -ne 0 ]; then + echo "failed to mount $SCRATCH_DEV and timestamp check is off" >> $seqres.full + exit + fi +fi + +# Begin test case 1 +echo "In memory timestamps update test start" >> $seqres.full + +# update time on the file +update_time=1 + +run_test $update_time + +echo "In memory timestamps update complete" >> $seqres.full + +echo "Unmounting and mounting scratch $SCRATCH_MNT" >> $seqres.full + +# unmount and remount $SCRATCH_DEV +_scratch_cycle_mount + +# Begin test case 2 + +n=1 + +# Do not update time on the file this time, just read from disk +update_time=0 + +echo "On disk timestamps update test start" >> $seqres.full + +# Re-run test +run_test $update_time + +echo "On disk timestamps update test complete" >> $seqres.full + +echo "y2038 inode timestamp tests completed successfully" + +# success, all done +status=0 +exit diff --git a/tests/generic/390.out b/tests/generic/390.out new file mode 100644 index 0000000..82bd4eb --- /dev/null +++ b/tests/generic/390.out @@ -0,0 +1,2 @@ +QA output created by 390 +y2038 inode timestamp tests completed successfully diff --git a/tests/generic/group b/tests/generic/group index 08007d7..d137d01 100644 --- a/tests/generic/group +++ b/tests/generic/group @@ -392,3 +392,4 @@ 387 auto clone 388 auto log metadata 389 auto quick acl +390 auto quick rw -- 2.7.4

4 years, 12 months

[PATCH v3 0/5] alpha: system call table generation support

by Firoz Khan

The purpose of this patch series is, we can easily add/modify/delete system call table support by cha- nging entry in syscall.tbl file instead of manually changing many files. The other goal is to unify the system call table generation support implementation across all the architectures. The system call tables are in different format in all architecture. It will be difficult to manually add, modify or delete the system calls in the resp- ective files manually. To make it easy by keeping a script and which'll generate uapi header file and syscall table file. syscall.tbl contains the list of available system calls along with system call number and correspond- ing entry point. Add a new system call in this arch- itecture will be possible by adding new entry in the syscall.tbl file. Adding a new table entry consisting of: - System call number. - ABI. - System call name. - Entry point name. ARM, s390 and x86 architecuture does exist the sim- ilar support. I leverage their implementation to come up with a generic solution. I have done the same support for work for ia64, m68k, microblaze, mips, parisc, powerpc, sh, sparc and xtensa. Below mentioned git repository contains more details about the workflow. https://github.com/frzkhn/system_call_table_generator/ Finally, this is the ground work to solve the Y2038 issue. We need to add two dozen of system calls to solve Y2038 issue. So this patch series will help to add new system calls easily by adding new entry in the syscall.tbl. changes since v2: - changed from generic-y to generated-y in Kbuild. - made changes in syscall.tbl for removing entry - alpha_ni_syscall. changes since v1: - optimized/updated the syscall table generation scripts. - fixed all mixed indentation issues in syscall.tbl. - added "comments" in syscall.tbl. - enclosed __NR_sycalls macro with __KERNEL__. - added missing new line. Firoz Khan (5): alpha: move __IGNORE* entries to non uapi header alpha: remove CONFIG_OSF4_COMPAT flag from syscall table alpha: add __NR_syscalls along with NR_SYSCALLS alpha: add system call table generation support alpha: generate uapi header and syscall table header files arch/alpha/Makefile | 3 + arch/alpha/include/asm/Kbuild | 2 +- arch/alpha/include/asm/unistd.h | 23 +- arch/alpha/include/uapi/asm/Kbuild | 1 + arch/alpha/include/uapi/asm/unistd.h | 484 +-------------------------- arch/alpha/kernel/osf_sys.c | 9 +- arch/alpha/kernel/syscalls/Makefile | 38 +++ arch/alpha/kernel/syscalls/syscall.tbl | 453 ++++++++++++++++++++++++++ arch/alpha/kernel/syscalls/syscallhdr.sh | 36 ++ arch/alpha/kernel/syscalls/syscalltbl.sh | 32 ++ arch/alpha/kernel/systbls.S | 542 +------------------------------ 11 files changed, 596 insertions(+), 1027 deletions(-) create mode 100644 arch/alpha/kernel/syscalls/Makefile create mode 100644 arch/alpha/kernel/syscalls/syscall.tbl create mode 100644 arch/alpha/kernel/syscalls/syscallhdr.sh create mode 100644 arch/alpha/kernel/syscalls/syscalltbl.sh -- 1.9.1

5 years, 4 months

[PATCH v3 0/3] sh: system call table generation support

by Firoz Khan

The purpose of this patch series is, we can easily add/modify/delete system call table support by cha- nging entry in syscall.tbl file instead of manually changing many files. The other goal is to unify the system call table generation support implementation across all the architectures. The system call tables are in different format in all architecture. It will be difficult to manually add, modify or delete the system calls in the resp- ective files manually. To make it easy by keeping a script and which'll generate uapi header file and syscall table file. syscall.tbl contains the list of available system calls along with system call number and correspond- ing entry point. Add a new system call in this arch- itecture will be possible by adding new entry in the syscall.tbl file. Adding a new table entry consisting of: - System call number. - ABI. - System call name. - Entry point name. Please note, this support is only available for 32-bit kernel, not 64-bit kernel. As I came across the 64-bit kernel is not active for long time. ARM, s390 and x86 architecuture does exist the sim- ilar support. I leverage their implementation to come up with a generic solution. I have done the same support for work for alpha, ia64, m68k, microblaze, mips, parisc, powerpc, sparc, and xtensa. Below mentioned git repository contains more details about the workflow. https://github.com/frzkhn/system_call_table_generator/ Finally, this is the ground work to solve the Y2038 issue. We need to add two dozen of system calls to solve Y2038 issue. So this patch series will help to add new system calls easily by adding new entry in the syscall- .tbl. Changes since v2: - changed from generic-y to generated-y in Kbuild. Changes since v1: - optimized/updated the syscall table generation scripts. - fixed all mixed indentation issues in syscall.tbl. - added "comments" in syscall.tbl. Firoz Khan (3): sh: add __NR_syscalls along with NR_syscalls sh: add system call table generation support sh: generate uapi header and syscall table header files arch/sh/Makefile | 3 + arch/sh/include/asm/Kbuild | 1 + arch/sh/include/asm/unistd.h | 2 + arch/sh/include/uapi/asm/Kbuild | 1 + arch/sh/include/uapi/asm/unistd_32.h | 4 +- arch/sh/include/uapi/asm/unistd_64.h | 4 +- arch/sh/kernel/syscalls/Makefile | 38 ++++ arch/sh/kernel/syscalls/syscall.tbl | 392 ++++++++++++++++++++++++++++++++++ arch/sh/kernel/syscalls/syscallhdr.sh | 36 ++++ arch/sh/kernel/syscalls/syscalltbl.sh | 32 +++ arch/sh/kernel/syscalls_32.S | 387 +-------------------------------- 11 files changed, 514 insertions(+), 386 deletions(-) create mode 100644 arch/sh/kernel/syscalls/Makefile create mode 100644 arch/sh/kernel/syscalls/syscall.tbl create mode 100644 arch/sh/kernel/syscalls/syscallhdr.sh create mode 100644 arch/sh/kernel/syscalls/syscalltbl.sh -- 1.9.1

5 years, 4 months

[PATCH v3 0/6] mips: system call table generation support

by Firoz Khan

The purpose of this patch series is, we can easily add/modify/delete system call table support by cha- nging entry in syscall.tbl file instead of manually changing many files. The other goal is to unify the system call table generation support implementation across all the architectures. The system call tables are in different format in all architecture. It will be difficult to manually add, modify or delete the system calls in the resp- ective files manually. To make it easy by keeping a script and which'll generate uapi header file and syscall table file. syscall.tbl contains the list of available system calls along with system call number and correspond- ing entry point. Add a new system call in this arch- itecture will be possible by adding new entry in the syscall.tbl file. Adding a new table entry consisting of: - System call number. - ABI. - System call name. - Entry point name. - Compat entry name, if required. ARM, s390 and x86 architecuture does exist the sim- ilar support. I leverage their implementation to come up with a generic solution. I have done the same support for work for alpha, ia64, m68k, microblaze, parisc, powerpc, sh, sparc, and xtensa. Below mentioned git repository contains more details about the workflow. https://github.com/frzkhn/system_call_table_generator/ Finally, this is the ground work to solve the Y2038 issue. We need to add two dozen of system calls to solve Y2038 issue. So this patch series will help to add new system calls easily by adding new entry in the syscall.tbl. Changes since v2: - fixed __NR_syscalls assign issue. Changes since v1: - optimized/updated the syscall table generation scripts. - fixed all mixed indentation issues in syscall.tbl. - added "comments" in syscall_*.tbl. - changed from generic-y to generated-y in Kbuild. Firoz Khan (6): mips: add __NR_syscalls along with __NR_Linux_syscalls mips: remove unused macros mips: add +1 to __NR_syscalls in uapi header mips: remove syscall table entries mips: add system call table generation support mips: generate uapi header and system call table files arch/mips/Makefile | 3 + arch/mips/include/asm/Kbuild | 4 + arch/mips/include/asm/unistd.h | 8 - arch/mips/include/uapi/asm/Kbuild | 6 + arch/mips/include/uapi/asm/unistd.h | 1065 +---------------------------- arch/mips/kernel/Makefile | 2 +- arch/mips/kernel/ftrace.c | 8 +- arch/mips/kernel/scall32-o32.S | 391 +---------- arch/mips/kernel/scall64-64.S | 444 ------------ arch/mips/kernel/scall64-n32.S | 341 +-------- arch/mips/kernel/scall64-n64.S | 117 ++++ arch/mips/kernel/scall64-o32.S | 379 +--------- arch/mips/kernel/syscalls/Makefile | 96 +++ arch/mips/kernel/syscalls/syscall_n32.tbl | 343 ++++++++++ arch/mips/kernel/syscalls/syscall_n64.tbl | 339 +++++++++ arch/mips/kernel/syscalls/syscall_o32.tbl | 382 +++++++++++ arch/mips/kernel/syscalls/syscallhdr.sh | 36 + arch/mips/kernel/syscalls/syscallnr.sh | 30 + arch/mips/kernel/syscalls/syscalltbl.sh | 36 + 19 files changed, 1430 insertions(+), 2600 deletions(-) delete mode 100644 arch/mips/kernel/scall64-64.S create mode 100644 arch/mips/kernel/scall64-n64.S create mode 100644 arch/mips/kernel/syscalls/Makefile create mode 100644 arch/mips/kernel/syscalls/syscall_n32.tbl create mode 100644 arch/mips/kernel/syscalls/syscall_n64.tbl create mode 100644 arch/mips/kernel/syscalls/syscall_o32.tbl create mode 100644 arch/mips/kernel/syscalls/syscallhdr.sh create mode 100644 arch/mips/kernel/syscalls/syscallnr.sh create mode 100644 arch/mips/kernel/syscalls/syscalltbl.sh -- 1.9.1

5 years, 4 months

[PATCH v4 0/5] y2038: Make ppoll, io_pgetevents and pselect y2038 safe

by Deepa Dinamani

The series transitions the ppoll, io_getevents, and pselect syscalls to be y2038 safe. This is part of the work proceeding for syscalls for y2038. It is based on the series [1] from Arnd Bergmann. The overview of the series is as below: 1. Refactor sigmask handling logic for the above syscalls. 2. Provide y2038 safe versions of the syscalls for all ABIs. [1] https://lkml.org/lkml/2018/8/27/651 Changes since v3: * fixed pselect copy+paste error Changes since v2: * remove 64BIT_TIME conditional for ppoll, pselect, io_getpevents as per review comments Changes since v1: * fixed bug pointed out by arnd Deepa Dinamani (5): signal: Add set_user_sigmask() signal: Add restore_user_sigmask() ppoll: use __kernel_timespec pselect6: use __kernel_timespec io_pgetevents: use __kernel_timespec fs/aio.c | 134 ++++++++++----- fs/eventpoll.c | 52 +----- fs/select.c | 360 ++++++++++++++++++++++----------------- include/linux/compat.h | 20 +++ include/linux/signal.h | 4 + include/linux/syscalls.h | 20 ++- kernel/signal.c | 78 +++++++++ 7 files changed, 426 insertions(+), 242 deletions(-) -- 2.17.1

5 years, 4 months

[PATCH v3 0/4] powerpc: system call table generation support

by Firoz Khan

The purpose of this patch series is, we can easily add/modify/delete system call table support by cha- nging entry in syscall.tbl file instead of manually changing many files. The other goal is to unify the system call table generation support implementation across all the architectures. The system call tables are in different format in all architecture. It will be difficult to manually add, modify or delete the system calls in the resp- ective files manually. To make it easy by keeping a script and which'll generate uapi header file and syscall table file. syscall.tbl contains the list of available system calls along with system call number and correspond- ing entry point. Add a new system call in this arch- itecture will be possible by adding new entry in the syscall.tbl file. Adding a new table entry consisting of: - System call number. - ABI. - System call name. - Entry point name. - Compat entry name, if required. - spu entry name, if required. ARM, s390 and x86 architecuture does exist the sim- ilar support. I leverage their implementation to come up with a generic solution. I have done the same support for work for alpha, ia64, m68k, microblaze, mips, parisc, sh, sparc, and xtensa. Below mentioned git repository contains more details about the workflow. https://github.com/frzkhn/system_call_table_generator/ Finally, this is the ground work to solve the Y2038 issue. We need to add two dozen of system calls to solve Y2038 issue. So this patch series will help to add new system calls easily by adding new entry in the syscall.tbl. changes since v2: - modified/optimized the syscall.tbl to avoid duplicate for the spu entries. - updated the syscalltbl.sh to meet the above point. changes since v1: - optimized/updated the syscall table generation scripts. - fixed all mixed indentation issues in syscall.tbl. - added "comments" in syscall_*.tbl. - changed from generic-y to generated-y in Kbuild. Firoz Khan (4): powerpc: add __NR_syscalls along with NR_syscalls powerpc: move macro definition from asm/systbl.h powerpc: add system call table generation support powerpc: generate uapi header and system call table files arch/powerpc/Makefile | 3 + arch/powerpc/include/asm/Kbuild | 4 + arch/powerpc/include/asm/systbl.h | 396 -------------------------- arch/powerpc/include/asm/unistd.h | 3 +- arch/powerpc/include/uapi/asm/Kbuild | 2 + arch/powerpc/include/uapi/asm/unistd.h | 389 +------------------------ arch/powerpc/kernel/Makefile | 10 - arch/powerpc/kernel/syscalls/Makefile | 63 ++++ arch/powerpc/kernel/syscalls/syscall.tbl | 427 ++++++++++++++++++++++++++++ arch/powerpc/kernel/syscalls/syscallhdr.sh | 36 +++ arch/powerpc/kernel/syscalls/syscalltbl.sh | 36 +++ arch/powerpc/kernel/systbl.S | 37 +-- arch/powerpc/kernel/systbl_chk.c | 60 ---- arch/powerpc/platforms/cell/spu_callbacks.c | 17 +- 14 files changed, 591 insertions(+), 892 deletions(-) delete mode 100644 arch/powerpc/include/asm/systbl.h create mode 100644 arch/powerpc/kernel/syscalls/Makefile create mode 100644 arch/powerpc/kernel/syscalls/syscall.tbl create mode 100644 arch/powerpc/kernel/syscalls/syscallhdr.sh create mode 100644 arch/powerpc/kernel/syscalls/syscalltbl.sh delete mode 100644 arch/powerpc/kernel/systbl_chk.c -- 1.9.1

5 years, 4 months

[PATCH v5 0/3] m68k: system call table generation support

by Firoz Khan

The purpose of this patch series is, we can easily add/modify/delete system call table support by cha- nging entry in syscall.tbl file instead of manually changing many files. The other goal is to unify the system call table generation support implementation across all the architectures. The system call tables are in different format in all architecture. It will be difficult to manually add, modify or delete the system calls in the resp- ective files manually. To make it easy by keeping a script and which'll generate uapi header file and syscall table file. syscall.tbl contains the list of available system calls along with system call number and correspond- ing entry point. Add a new system call in this arch- itecture will be possible by adding new entry in the syscall.tbl file. Adding a new table entry consisting of: - System call number. - ABI. - System call name. - Entry point name. ARM, s390 and x86 architecuture does exist the sim- ilar support. I leverage their implementation to come up with a generic solution. I have done the same support for work for alpha, ia64, microblaze, mips, parisc, powerpc, sh, sparc and xtensa. Below mentioned git repository contains more details about the workflow. https://github.com/frzkhn/system_call_table_generator/ Finally, this is the ground work to solve the Y2038 issue. We need to add two dozen of system calls to solve Y2038 issue. So this patch series will help to add new system calls easily by adding new entry in the syscall.tbl. changes since v4: - changed from generic-y to generated-y in Kbuild. - remove the patch "0001-m68k-rename-system-call- table-file-name.patch". changes since v3: - optimized/updated the syscall table generation scripts. - fixed all mixed indentation issues in syscall.tbl. - added "comments" in syscall_*.tbl. changes since v2: - removed __IGNORE entries which was added in v2 to suppress the warning. - added missing new line. changes since v1: - enclosed __NR_sycalls macro with __KERNEL__. Firoz Khan (3): m68k: add __NR_syscalls along with NR_syscalls m68k: add system call table generation support m68k: generate uapi header and syscall table header files arch/m68k/Makefile | 3 + arch/m68k/include/asm/Kbuild | 1 + arch/m68k/include/asm/unistd.h | 3 +- arch/m68k/include/uapi/asm/Kbuild | 1 + arch/m68k/include/uapi/asm/unistd.h | 385 +------------------------------ arch/m68k/kernel/syscalls/Makefile | 38 ++++ arch/m68k/kernel/syscalls/syscall.tbl | 389 ++++++++++++++++++++++++++++++++ arch/m68k/kernel/syscalls/syscallhdr.sh | 36 +++ arch/m68k/kernel/syscalls/syscalltbl.sh | 32 +++ arch/m68k/kernel/syscalltable.S | 387 +------------------------------ 10 files changed, 507 insertions(+), 768 deletions(-) create mode 100644 arch/m68k/kernel/syscalls/Makefile create mode 100644 arch/m68k/kernel/syscalls/syscall.tbl create mode 100644 arch/m68k/kernel/syscalls/syscallhdr.sh create mode 100644 arch/m68k/kernel/syscalls/syscalltbl.sh -- 1.9.1

5 years, 4 months

[PATCH 0/8] net: y2038-safe socket timestamps

by Deepa Dinamani

The series introduces new socket timestamps that are y2038 safe. The time data types used for the existing socket timestamp options: SO_TIMESTAMP, SO_TIMESTAMPNS and SO_TIMESTAMPING are not y2038 safe. The series introduces SO_TIMESTAMP_NEW, SO_TIMESTAMPNS_NEW and SO_TIMESTAMPING_NEW to replace these. These new timestamps can be used on all architectures. The alternative considered was to extend the sys_setsockopt() by using the flags. We did not receive any strong opinions about either of the approaches. Hence, this was chosen, as glibc folks preferred this. The series does not deal with updating the internal kernel socket calls like rxrpc to make them y2038 safe. This will be dealt with separately. Note that the timestamps behavior already does not match the man page specific behavior: SIOCGSTAMP This ioctl should only be used if the socket option SO_TIMESTAMP is not set on the socket. Otherwise, it returns the timestamp of the last packet that was received while SO_TIMESTAMP was not set, or it fails if no such packet has been received, (i.e., ioctl(2) returns -1 with errno set to ENOENT). The recommendation is to update the man page to remove the above statement. The overview of the series is as below: 1. Delete asm specific socket.h when possible. 2. Support SO/SCM_TIMESTAMP* options only in userspace. 3. Rename current SO/SCM_TIMESTAMP* to SO/SCM_TIMESTAMP*_OLD. 3. Alter socket options so that SOCK_RCVTSTAMPNS does not rely on SOCK_RCVTSTAMP. 4. Introduce y2038 safe types for socket timestamp. 5. Introduce new y2038 safe socket options SO/SCM_TIMESTAMP*_NEW. Deepa Dinamani (8): arch: Use asm-generic/socket.h when possible sockopt: Rename SO_TIMESTAMP* to SO_TIMESTAMP*_OLD socket: Disentangle SOCK_RCVTSTAMPNS from SOCK_RCVTSTAMP arch: sparc: Override struct __kernel_old_timeval socket: Use old_timeval types for socket timestamps socket: Add struct sock_timeval socket: Add SO_TIMESTAMP[NS]_NEW socket: Add SO_TIMESTAMPING_NEW arch/alpha/include/uapi/asm/socket.h | 35 ++++-- arch/ia64/include/uapi/asm/Kbuild | 1 + arch/ia64/include/uapi/asm/socket.h | 120 ------------------ arch/mips/include/uapi/asm/socket.h | 34 ++++-- arch/parisc/include/uapi/asm/socket.h | 34 ++++-- arch/s390/include/uapi/asm/Kbuild | 1 + arch/s390/include/uapi/asm/socket.h | 117 ------------------ arch/sparc/include/uapi/asm/posix_types.h | 10 ++ arch/sparc/include/uapi/asm/socket.h | 36 ++++-- arch/x86/include/uapi/asm/Kbuild | 1 + arch/x86/include/uapi/asm/socket.h | 1 - arch/xtensa/include/asm/Kbuild | 1 + arch/xtensa/include/uapi/asm/Kbuild | 1 + arch/xtensa/include/uapi/asm/socket.h | 122 ------------------- drivers/isdn/mISDN/socket.c | 2 +- include/linux/skbuff.h | 24 +++- include/linux/socket.h | 7 ++ include/net/sock.h | 5 +- include/uapi/asm-generic/socket.h | 35 ++++-- include/uapi/linux/errqueue.h | 4 + include/uapi/linux/time.h | 7 ++ net/bluetooth/hci_sock.c | 4 +- net/compat.c | 12 +- net/core/scm.c | 27 ++++ net/core/sock.c | 142 ++++++++++++++-------- net/ipv4/tcp.c | 82 ++++++++----- net/rds/af_rds.c | 10 +- net/rds/recv.c | 18 ++- net/rxrpc/local_object.c | 2 +- net/smc/af_smc.c | 3 +- net/socket.c | 68 +++++++---- net/unix/af_unix.c | 4 +- 32 files changed, 449 insertions(+), 521 deletions(-) delete mode 100644 arch/ia64/include/uapi/asm/socket.h delete mode 100644 arch/s390/include/uapi/asm/socket.h delete mode 100644 arch/x86/include/uapi/asm/socket.h delete mode 100644 arch/xtensa/include/uapi/asm/socket.h base-commit: b124b524bc97868cc2b5656e6ffa21a9b752b7e0 -- 2.17.1 Cc: chris(a)zankel.net Cc: fenghua.yu(a)intel.com Cc: tglx(a)linutronix.de Cc: schwidefsky(a)de.ibm.com Cc: linux-ia64(a)vger.kernel.org Cc: linux-xtensa(a)linux-xtensa.org Cc: linux-s390(a)vger.kernel.org Cc: deller(a)gmx.de Cc: dhowells(a)redhat.com Cc: jejb(a)parisc-linux.org Cc: ralf(a)linux-mips.org Cc: rth(a)twiddle.net Cc: linux-afs(a)lists.infradead.org Cc: linux-alpha(a)vger.kernel.org Cc: linux-arch(a)vger.kernel.org Cc: linux-mips(a)linux-mips.org Cc: linux-parisc(a)vger.kernel.org Cc: linux-rdma(a)vger.kernel.org Cc: sparclinux(a)vger.kernel.org Cc: sparclinux(a)vger.kernel.org Cc: isdn(a)linux-pingi.de Cc: jejb(a)parisc-linux.org Cc: ralf(a)linux-mips.org Cc: rth(a)twiddle.net Cc: linux-alpha(a)vger.kernel.org Cc: linux-mips(a)linux-mips.org Cc: linux-parisc(a)vger.kernel.org Cc: linux-rdma(a)vger.kernel.org Cc: netdev(a)vger.kernel.org Cc: sparclinux(a)vger.kernel.org Cc: chris(a)zankel.net Cc: fenghua.yu(a)intel.com Cc: rth(a)twiddle.net Cc: tglx(a)linutronix.de Cc: ubraun(a)linux.ibm.com Cc: linux-alpha(a)vger.kernel.org Cc: linux-arch(a)vger.kernel.org Cc: linux-ia64(a)vger.kernel.org Cc: linux-mips(a)linux-mips.org Cc: linux-s390(a)vger.kernel.org Cc: linux-xtensa(a)linux-xtensa.org Cc: sparclinux(a)vger.kernel.org

5 years, 4 months

[PATCH 0/3] System call table generation support

by Firoz Khan

The purpose of this patch series is: 1. We can easily add/modify/delete system call by changing entry in syscall.tbl file. No need to manually edit many files. 2. It is easy to unify the system call implementation across all the architectures. The system call tables are in different format in all architecture and it will be difficult to manually add or modify the system calls in the respective files manually. To make it easy by keeping a script and which'll generate the header file and syscall table file so this change will unify them across all architectures. syscall.tbl contains the list of available system calls along with system call number and corresponding entry point. Add a new system call in this architecture will be possible by adding new entry in the syscall.tbl file. Adding a new table entry consisting of: - System call number. - ABI. - System call name. - Entry point name. - Compat entry name, if required. ARM, s390 and x86 architecuture does exist the similar support. I leverage their implementation to come up with a generic solution. I have done the same support for work for alpha, m68k, microblaze, ia64, mips, parisc, sh, sparc, and xtensa. But I started sending the patch for one architecuture for review. Below mentioned git repository contains more details. Git repo:- https://github.com/frzkhn/system_call_table_generator/ Finally, this is the ground work for solving the Y2038 issue. We need to add/change two dozen of system calls to solve Y2038 issue. So this patch series will help to easily modify from existing system call to Y2038 compatible system calls. I started working system call table generation on 4.17-rc1. I used marcin's script - https://github.com/hrw/syscalls-table to generate the syscall.tbl file. And this will be the input to the system call table generation script. But there are couple system call got add in the latest rc release. If run Marcin's script on latest release, It will generate a new syscall.tbl. But I still use the old file - syscall.tbl and once all review got over I'll update syscall.tbl alone w.r.to the tip of the kernel. The impact of this thing, few of the system call won't work. Firoz Khan (3): powerpc: Replace NR_syscalls macro from asm/unistd.h powerpc: Add system call table generation support powerpc: uapi header and system call table file generation arch/powerpc/Makefile | 3 + arch/powerpc/include/asm/Kbuild | 3 + arch/powerpc/include/asm/unistd.h | 3 +- arch/powerpc/include/uapi/asm/Kbuild | 2 + arch/powerpc/include/uapi/asm/unistd.h | 391 +--------------------------- arch/powerpc/kernel/Makefile | 3 +- arch/powerpc/kernel/syscall_table_32.S | 9 + arch/powerpc/kernel/syscall_table_64.S | 17 ++ arch/powerpc/kernel/syscalls/Makefile | 51 ++++ arch/powerpc/kernel/syscalls/syscall_32.tbl | 378 +++++++++++++++++++++++++++ arch/powerpc/kernel/syscalls/syscall_64.tbl | 372 ++++++++++++++++++++++++++ arch/powerpc/kernel/syscalls/syscallhdr.sh | 37 +++ arch/powerpc/kernel/syscalls/syscalltbl.sh | 38 +++ arch/powerpc/kernel/systbl.S | 50 ---- 14 files changed, 916 insertions(+), 441 deletions(-) create mode 100644 arch/powerpc/kernel/syscall_table_32.S create mode 100644 arch/powerpc/kernel/syscall_table_64.S create mode 100644 arch/powerpc/kernel/syscalls/Makefile create mode 100644 arch/powerpc/kernel/syscalls/syscall_32.tbl create mode 100644 arch/powerpc/kernel/syscalls/syscall_64.tbl create mode 100644 arch/powerpc/kernel/syscalls/syscallhdr.sh create mode 100644 arch/powerpc/kernel/syscalls/syscalltbl.sh delete mode 100644 arch/powerpc/kernel/systbl.S -- 1.9.1

5 years, 4 months

[PATCH v8 0/6] parisc: system call table generation support

by Firoz Khan

The purpose of this patch series is, we can easily add/modify/delete system call table support by cha- nging entry in syscall.tbl file instead of manually changing many files. The other goal is to unify the system call table generation support implementation across all the architectures. The system call tables are in different format in all architecture. It will be difficult to manually add, modify or delete the system calls in the resp- ective files manually. To make it easy by keeping a script and which'll generate uapi header file and syscall table file. syscall.tbl contains the list of available system calls along with system call number and correspond- ing entry point. Add a new system call in this arch- itecture will be possible by adding new entry in the syscall.tbl file. Adding a new table entry consisting of: - System call number. - ABI. - System call name. - Entry point name. ARM, s390 and x86 architecuture does exist the sim- ilar support. I leverage their implementation to come up with a generic solution. I have done the same support for work for alpha, ia64, m68k, microblaze, mips, powerpc, sh, sparc and xtensa. Below mentioned git repository contains more details about the workflow. https://github.com/frzkhn/system_call_table_generator/ Finally, this is the ground work to solve the Y2038 issue. We need to add two dozen of system calls to solve Y2038 issue. So this patch series will help to add new system calls easily by adding new entry in the syscall.tbl. changes since v7: - removed __NR_Linux from uapi header file. changes since v6: - changed from generic-y to generated-y in Kbuild. changes since v5: - optimized/updated the syscall table generation scripts. - fixed all mixed indentation issues in syscall.tbl. - added "comments" in syscall_*.tbl. changes since v4: - optimized/updated the syscall table generation scripts. - removed __IGNORE entries which was added in v2 to suppress the warning. changes since v3: - optimized/updated the syscall table generation scripts. - added missing new line. changes since v2: - updated the syscall.tbl file by including missed entries. changes since v1: - enclosed __NR_sycalls macro with __KERNEL__. Firoz Khan (6): parisc: move __IGNORE* entries to non uapi header parisc: add __NR_syscalls along with __NR_Linux_syscalls parisc: remove __NR_Linux from uapi header file. parisc: add system call table generation support parisc: generate uapi header and system call table files parisc: syscalls: ignore nfsservctl for other architectures arch/parisc/Makefile | 3 + arch/parisc/include/asm/Kbuild | 3 + arch/parisc/include/asm/unistd.h | 8 + arch/parisc/include/uapi/asm/Kbuild | 2 + arch/parisc/include/uapi/asm/unistd.h | 379 +----------------------- arch/parisc/kernel/syscall.S | 11 +- arch/parisc/kernel/syscall_table.S | 459 ------------------------------ arch/parisc/kernel/syscalls/Makefile | 55 ++++ arch/parisc/kernel/syscalls/syscall.tbl | 369 ++++++++++++++++++++++++ arch/parisc/kernel/syscalls/syscallhdr.sh | 36 +++ arch/parisc/kernel/syscalls/syscalltbl.sh | 36 +++ scripts/checksyscalls.sh | 1 + 12 files changed, 527 insertions(+), 835 deletions(-) delete mode 100644 arch/parisc/kernel/syscall_table.S create mode 100644 arch/parisc/kernel/syscalls/Makefile create mode 100644 arch/parisc/kernel/syscalls/syscall.tbl create mode 100644 arch/parisc/kernel/syscalls/syscallhdr.sh create mode 100644 arch/parisc/kernel/syscalls/syscalltbl.sh -- 1.9.1

5 years, 5 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

Y2038 November 2018