The test helps to validate clamping and mount behaviors according to supported file system timestamp ranges.

Note that the test can fail on 32-bit systems for a few file systems. This will be corrected when vfs is transitioned to use 64-bit timestamps.

Signed-off-by: Deepa Dinamani deepa.kernel@gmail.com --- The branch of the kernel tree can be located at

https://github.com/deepa-hub/vfs refs/heads/vfs_timestamp_policy

The xfs_io patch to add utimes is at

https://www.spinics.net/lists/linux-xfs/msg02952.html

Changes since v2: * Refactored notrun handling * Updated comments

Changes since v1: * Use xfs_io utimes command * Updated error handling * Reorganized code according to review comments

common/rc | 48 +++++++++++++ tests/generic/390 | 192 ++++++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/390.out | 2 + tests/generic/group | 1 + 4 files changed, 243 insertions(+) create mode 100755 tests/generic/390 create mode 100644 tests/generic/390.out

diff --git a/common/rc b/common/rc index e3b54ec..17f025e 100644 --- a/common/rc +++ b/common/rc @@ -1960,6 +1960,51 @@ _run_aiodio() return $status }

+# this test requires y2038 sysfs switch and filesystem +# timestamp ranges support. +_require_y2038() +{ + local device=${1:-$TEST_DEV} + local sysfsdir=/proc/sys/fs/fs-timestamp-check-on + + if [ ! -e $sysfsdir ]; then + _notrun "no kernel support for y2038 sysfs switch" + fi + + local tsmin tsmax + read tsmin tsmax <<<$(_filesystem_timestamp_range $device) + if [ $tsmin -eq -1 -a $tsmax -eq -1 ]; then + _notrun "filesystem $FSTYP timestamp bounds are unknown" + fi +} + +_filesystem_timestamp_range() +{ + device=${1:-$TEST_DEV} + case $FSTYP in + ext4) + if [ $(dumpe2fs -h $device 2>/dev/null | grep "Inode size:" | cut -d: -f2) -gt 128 ]; then + echo "-2147483648 15032385535" + else + echo "-2147483648 2147483647" + fi + ;; + + xfs) + echo "-2147483648 2147483647" + ;; + jfs) + echo "0 4294967295" + ;; + f2fs) + echo "-2147483648 2147483647" + ;; + *) + echo "-1 -1" + ;; + esac +} + # indicate whether YP/NIS is active or not # _yp_active() @@ -2070,6 +2115,9 @@ _require_xfs_io_command() echo $testio | egrep -q "Inappropriate ioctl" && \ _notrun "xfs_io $command support is missing" ;; + "utimes" ) + testio=`$XFS_IO_PROG -f -c "utimes" 0 0 0 0 $testfile 2>&1` + ;; *) testio=`$XFS_IO_PROG -c "$command help" 2>&1` esac diff --git a/tests/generic/390 b/tests/generic/390 new file mode 100755 index 0000000..f68b931 --- /dev/null +++ b/tests/generic/390 @@ -0,0 +1,192 @@ +#! /bin/bash +# FS QA Test 390 +# +# Tests to verify policy for filesystem timestamps for +# supported ranges: +# 1. Verify filesystem rw mount according to sysctl +# timestamp_supported. +# 2. Verify timestamp clamping for timestamps beyond max +# timestamp supported. +# +# Exit status 1: either or both tests above fail. +# Exit status 0: both the above tests pass. +# +#----------------------------------------------------------------------- +# Copyright (c) 2016 Deepa Dinamani. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "exit $status" 0 1 2 3 15 + +# Get standard environment, filters and checks. +. ./common/rc +. ./common/filter +. ./common/attr + +# remove previous $seqres.full before test +rm -f $seqres.full + +# Prerequisites for the test run. +_supported_fs generic +_supported_os Linux +_require_scratch +_require_xfs_io_command utimes + +# Compare file timestamps obtained from stat +# with a given timestamp. +check_stat() +{ + file=$1 + timestamp=$2 + + stat_timestamp=`stat -c"%X;%Y" $file` + + prev_timestamp="$timestamp;$timestamp" + if [ $prev_timestamp != $stat_timestamp ]; then + echo "$prev_timestamp != $stat_timestamp" | tee -a $seqres.full + fi +} + +run_test_individual() +{ + file=$1 + timestamp=$2 + update_time=$3 + + #check if the time needs update + if [ $update_time -eq 1 ]; then + echo "Updating file: $file to timestamp `date -d @$timestamp`" >> $seqres.full + $XFS_IO_PROG -f -c "utimes $timestamp 0 $timestamp 0" $file + if [ $? -ne 0 ]; then + echo "Failed to update times on $file" | tee -a $seqres.full + fi + fi + + tsclamp=$(($timestamp>$tsmax?$tsmax:$timestamp)) + echo "Checking file: $file Updated timestamp is `date -d @$tsclamp`" >> $seqres.full + check_stat $file $tsclamp +} + +run_test() +{ + update_time=$1 + + n=1 + + for TIME in "${TIMESTAMPS[@]}" + do + #Run the test + run_test_individual ${SCRATCH_MNT}/test_$n $TIME $update_time + + #update iterator + ((n++)) + done +} + +_scratch_mkfs &>> $seqres.full 2>&1 || _fail "mkfs failed" +_require_y2038 $SCRATCH_DEV + +read tsmin tsmax <<<$(_filesystem_timestamp_range $SCRATCH_DEV) +echo min supported timestamp $tsmin $(date --date=@$tsmin) >> $seqres.full +echo max supported timestamp $tsmax $(date --date=@$tsmax) >> $seqres.full + +# Test timestamps array + +declare -a TIMESTAMPS=( + $tsmin + 0 + $tsmax + $((tsmax+1)) + 4294967295 + 8589934591 + 34359738367 +) + +# Max timestamp is hardcoded to Mon Jan 18 19:14:07 PST 2038 +sys_tsmax=2147483647 +echo "max timestamp that needs to be supported by fs for rw mount is" \ + "$((sys_tsmax+1)) $(date --date=@$((sys_tsmax+1)))" >> $seqres.full + +read ts_check <<<$(cat /proc/sys/fs/fs-timestamp-check-on) + +_scratch_mount +result=$? + +if [ $ts_check -ne 0 ]; then + echo "sysctl filesystem timestamp check is on" >> $seqres.full + # check for mount failure if the minimum requirement for max timestamp + # supported is not met. + if [ $sys_tsmax -ge $tsmax ]; then + if [ $result -eq 0 ]; then + echo "mount test failed" | tee -a $seqres.full + exit + fi + else + if [ $result -ne 0 ]; then + echo "failed to mount $SCRATCH_DEV" | tee -a $seqres.full + exit + fi + fi +else + # if sysctl switch is off then mount should succeed always. + echo "sysctl filesystem timestamp check is off" >> $seqres.full + if [ $result -ne 0 ]; then + echo "failed to mount $SCRATCH_DEV and timestamp check is off" >> $seqres.full + exit + fi +fi + +# Begin test case 1 +echo "In memory timestamps update test start" >> $seqres.full + +# update time on the file +update_time=1 + +run_test $update_time + +echo "In memory timestamps update complete" >> $seqres.full + +echo "Unmounting and mounting scratch $SCRATCH_MNT" >> $seqres.full + +# unmount and remount $SCRATCH_DEV +_scratch_cycle_mount + +# Begin test case 2 + +n=1 + +# Do not update time on the file this time, just read from disk +update_time=0 + +echo "On disk timestamps update test start" >> $seqres.full + +# Re-run test +run_test $update_time + +echo "On disk timestamps update test complete" >> $seqres.full + +echo "y2038 inode timestamp tests completed successfully" + +# success, all done +status=0 +exit diff --git a/tests/generic/390.out b/tests/generic/390.out new file mode 100644 index 0000000..82bd4eb --- /dev/null +++ b/tests/generic/390.out @@ -0,0 +1,2 @@ +QA output created by 390 +y2038 inode timestamp tests completed successfully diff --git a/tests/generic/group b/tests/generic/group index 08007d7..d137d01 100644 --- a/tests/generic/group +++ b/tests/generic/group @@ -392,3 +392,4 @@ 387 auto clone 388 auto log metadata 389 auto quick acl +390 auto quick rw