CoreSight August 2023

coresight@lists.linaro.org

12 participants
71 discussions

[PATCH V2] coresight: tmc: Make etr buffer mode user configurable from sysfs

by Anshuman Khandual

Currently TMC-ETR automatically selects the buffer mode from all available methods in the following sequentially fallback manner - also in that order. 1. FLAT mode with or without IOMMU 2. TMC-ETR-SG (scatter gather) mode when available 3. CATU mode when available But this order might not be ideal for all situations. For example if there is a CATU connected to ETR, it may be better to use TMC-ETR scatter gather method, rather than CATU. But hard coding such order changes will prevent us from testing or using a particular mode. This change provides following new sysfs tunables for the user to control TMC-ETR buffer mode explicitly, if required. This adds following new sysfs files for buffer mode selection purpose explicitly in the user space. /sys/bus/coresight/devices/tmc_etr<N>/buf_modes_available /sys/bus/coresight/devices/tmc_etr<N>/buf_mode_preferred $ cat buf_modes_available auto flat tmc-sg catu ------------------> Supported TMC-ETR buffer modes $ echo catu > buf_mode_preferred -------> Explicit buffer mode request But explicit user request has to be within supported ETR buffer modes only. These sysfs interface files are exclussive to ETR, and hence these are not available for other TMC devices such as ETB or ETF etc. A new auto' mode (i.e ETR_MODE_AUTO) has been added to help fallback to the existing default behaviour, when user provided preferred buffer mode fails. ETR_MODE_FLAT and ETR_MODE_AUTO are always available as preferred modes. Cc: Suzuki K Poulose <suzuki.poulose(a)arm.com> Cc: Mike Leach <mike.leach(a)linaro.org> Cc: James Clark <james.clark(a)arm.com> Cc: Leo Yan <leo.yan(a)linaro.org> Cc: Alexander Shishkin <alexander.shishkin(a)linux.intel.com> Cc: coresight(a)lists.linaro.org Cc: linux-arm-kernel(a)lists.infradead.org Cc: linux-kernel(a)vger.kernel.org Signed-off-by: Anshuman Khandual <anshuman.khandual(a)arm.com> --- This applies on v6.5-rc6 Changes in V2: - Renamed sysfs file etr_buf_modes_available as buf_modes_available - Renamed sysfs file buf_mode_current as buf_mode_preferred - Renamed etr_supports_flat_mode() as etr_can_use_flat_mode() - Renamed coresight_tmc_groups[] as coresight_etf_groups[] - Reused coresight_tmc_group[] for trigger_cntr and buffer_size - Fallback trying ETR_MODE_AUTO when user preferred mode fails - Moved ETR sysfs details into coresight-tmc-etr.c - Dropped etr_can_use_flat_mode() check while offering ETR_MODE_FLAT in sysfs - Moved struct etr_buf_hw inside coresight-tmc-etr.c - Moved get_etr_buf_hw() and etr_can_use_flat_mode() inside coresight-tmc-etr.c - Updated month in Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc Changes in V1: https://lore.kernel.org/all/20230728084837.276551-1-anshuman.khandual@arm.c… .../testing/sysfs-bus-coresight-devices-tmc | 16 +++ .../hwtracing/coresight/coresight-tmc-core.c | 15 ++- .../hwtracing/coresight/coresight-tmc-etr.c | 111 ++++++++++++++++-- drivers/hwtracing/coresight/coresight-tmc.h | 3 + 4 files changed, 131 insertions(+), 14 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc index 6aa527296c71..50833ce97300 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc @@ -91,3 +91,19 @@ Contact: Mathieu Poirier <mathieu.poirier(a)linaro.org> Description: (RW) Size of the trace buffer for TMC-ETR when used in SYSFS mode. Writable only for TMC-ETR configurations. The value should be aligned to the kernel pagesize. + +What: /sys/bus/coresight/devices/<memory_map>.tmc/buf_modes_available +Date: August 2023 +KernelVersion: 6.6 +Contact: Anshuman Khandual <anshuman.khandual(a)arm.com> +Description: (Read) Shows all supported Coresight TMC-ETR buffer modes available + for the users to configure explicitly. This file is avaialble only + for TMC ETR devices. + +What: /sys/bus/coresight/devices/<memory_map>.tmc/buf_mode_preferred +Date: August 2023 +KernelVersion: 6.6 +Contact: Anshuman Khandual <anshuman.khandual(a)arm.com> +Description: (RW) Current Coresight TMC-ETR buffer mode selected. But user could + only provide a mode which is supported for a given ETR device. This + file is available only for TMC ETR devices. diff --git a/drivers/hwtracing/coresight/coresight-tmc-core.c b/drivers/hwtracing/coresight/coresight-tmc-core.c index c106d142e632..7ec5365e2b64 100644 --- a/drivers/hwtracing/coresight/coresight-tmc-core.c +++ b/drivers/hwtracing/coresight/coresight-tmc-core.c @@ -10,6 +10,7 @@ #include <linux/device.h> #include <linux/idr.h> #include <linux/io.h> +#include <linux/iommu.h> #include <linux/err.h> #include <linux/fs.h> #include <linux/miscdevice.h> @@ -344,7 +345,14 @@ static const struct attribute_group coresight_tmc_mgmt_group = { .name = "mgmt", }; -static const struct attribute_group *coresight_tmc_groups[] = { +static const struct attribute_group *coresight_etf_groups[] = { + &coresight_tmc_group, + &coresight_tmc_mgmt_group, + NULL, +}; + +static const struct attribute_group *coresight_etr_groups[] = { + &coresight_etr_group, &coresight_tmc_group, &coresight_tmc_mgmt_group, NULL, @@ -465,6 +473,7 @@ static int tmc_probe(struct amba_device *adev, const struct amba_id *id) drvdata->memwidth = tmc_get_memwidth(devid); /* This device is not associated with a session */ drvdata->pid = -1; + drvdata->etr_mode = ETR_MODE_AUTO; if (drvdata->config_type == TMC_CONFIG_TYPE_ETR) { drvdata->size = tmc_etr_get_default_buffer_size(dev); @@ -474,16 +483,17 @@ static int tmc_probe(struct amba_device *adev, const struct amba_id *id) } desc.dev = dev; - desc.groups = coresight_tmc_groups; switch (drvdata->config_type) { case TMC_CONFIG_TYPE_ETB: + desc.groups = coresight_etf_groups; desc.type = CORESIGHT_DEV_TYPE_SINK; desc.subtype.sink_subtype = CORESIGHT_DEV_SUBTYPE_SINK_BUFFER; desc.ops = &tmc_etb_cs_ops; dev_list = &etb_devs; break; case TMC_CONFIG_TYPE_ETR: + desc.groups = coresight_etr_groups; desc.type = CORESIGHT_DEV_TYPE_SINK; desc.subtype.sink_subtype = CORESIGHT_DEV_SUBTYPE_SINK_SYSMEM; desc.ops = &tmc_etr_cs_ops; @@ -496,6 +506,7 @@ static int tmc_probe(struct amba_device *adev, const struct amba_id *id) dev_list = &etr_devs; break; case TMC_CONFIG_TYPE_ETF: + desc.groups = coresight_etf_groups; desc.type = CORESIGHT_DEV_TYPE_LINKSINK; desc.subtype.sink_subtype = CORESIGHT_DEV_SUBTYPE_SINK_BUFFER; desc.subtype.link_subtype = CORESIGHT_DEV_SUBTYPE_LINK_FIFO; diff --git a/drivers/hwtracing/coresight/coresight-tmc-etr.c b/drivers/hwtracing/coresight/coresight-tmc-etr.c index 766325de0e29..52ce24afa323 100644 --- a/drivers/hwtracing/coresight/coresight-tmc-etr.c +++ b/drivers/hwtracing/coresight/coresight-tmc-etr.c @@ -26,6 +26,12 @@ struct etr_flat_buf { size_t size; }; +struct etr_buf_hw { + bool has_iommu; + bool has_etr_sg; + bool has_catu; +}; + /* * etr_perf_buffer - Perf buffer used for ETR * @drvdata - The ETR drvdaga this buffer has been allocated for. @@ -828,6 +834,22 @@ static inline int tmc_etr_mode_alloc_buf(int mode, } } +static void get_etr_buf_hw(struct device *dev, struct etr_buf_hw *buf_hw) +{ + struct tmc_drvdata *drvdata = dev_get_drvdata(dev->parent); + + buf_hw->has_iommu = iommu_get_domain_for_dev(dev->parent); + buf_hw->has_etr_sg = tmc_etr_has_cap(drvdata, TMC_ETR_SG); + buf_hw->has_catu = !!tmc_etr_get_catu_device(drvdata); +} + +static bool etr_can_use_flat_mode(struct etr_buf_hw *buf_hw, ssize_t etr_buf_size) +{ + bool has_sg = buf_hw->has_catu || buf_hw->has_etr_sg; + + return !has_sg || buf_hw->has_iommu || etr_buf_size < SZ_1M; +} + /* * tmc_alloc_etr_buf: Allocate a buffer use by ETR. * @drvdata : ETR device details. @@ -841,23 +863,22 @@ static struct etr_buf *tmc_alloc_etr_buf(struct tmc_drvdata *drvdata, int node, void **pages) { int rc = -ENOMEM; - bool has_etr_sg, has_iommu; - bool has_sg, has_catu; struct etr_buf *etr_buf; + struct etr_buf_hw buf_hw; struct device *dev = &drvdata->csdev->dev; - has_etr_sg = tmc_etr_has_cap(drvdata, TMC_ETR_SG); - has_iommu = iommu_get_domain_for_dev(dev->parent); - has_catu = !!tmc_etr_get_catu_device(drvdata); - - has_sg = has_catu || has_etr_sg; - + get_etr_buf_hw(dev, &buf_hw); etr_buf = kzalloc(sizeof(*etr_buf), GFP_KERNEL); if (!etr_buf) return ERR_PTR(-ENOMEM); etr_buf->size = size; + /* If there is user directive for buffer mode, try that first */ + if (drvdata->etr_mode != ETR_MODE_AUTO) + rc = tmc_etr_mode_alloc_buf(drvdata->etr_mode, drvdata, + etr_buf, node, pages); + /* * If we have to use an existing list of pages, we cannot reliably * use a contiguous DMA memory (even if we have an IOMMU). Otherwise, @@ -870,14 +891,13 @@ static struct etr_buf *tmc_alloc_etr_buf(struct tmc_drvdata *drvdata, * Fallback to available mechanisms. * */ - if (!pages && - (!has_sg || has_iommu || size < SZ_1M)) + if (rc && !pages && etr_can_use_flat_mode(&buf_hw, size)) rc = tmc_etr_mode_alloc_buf(ETR_MODE_FLAT, drvdata, etr_buf, node, pages); - if (rc && has_etr_sg) + if (rc && buf_hw.has_etr_sg) rc = tmc_etr_mode_alloc_buf(ETR_MODE_ETR_SG, drvdata, etr_buf, node, pages); - if (rc && has_catu) + if (rc && buf_hw.has_catu) rc = tmc_etr_mode_alloc_buf(ETR_MODE_CATU, drvdata, etr_buf, node, pages); if (rc) { @@ -1800,3 +1820,70 @@ int tmc_read_unprepare_etr(struct tmc_drvdata *drvdata) return 0; } + +static const char *const buf_modes_str[] = { + [ETR_MODE_FLAT] = "flat", + [ETR_MODE_ETR_SG] = "tmc-sg", + [ETR_MODE_CATU] = "catu", + [ETR_MODE_AUTO] = "auto", +}; + +static ssize_t buf_modes_available_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct etr_buf_hw buf_hw; + ssize_t size = 0; + + get_etr_buf_hw(dev, &buf_hw); + size += sysfs_emit(buf, "%s ", buf_modes_str[ETR_MODE_AUTO]); + size += sysfs_emit_at(buf, size, "%s ", buf_modes_str[ETR_MODE_FLAT]); + if (buf_hw.has_etr_sg) + size += sysfs_emit_at(buf, size, "%s ", buf_modes_str[ETR_MODE_ETR_SG]); + + if (buf_hw.has_catu) + size += sysfs_emit_at(buf, size, "%s ", buf_modes_str[ETR_MODE_CATU]); + + size += sysfs_emit_at(buf, size, "\n"); + return size; +} +static DEVICE_ATTR_RO(buf_modes_available); + +static ssize_t buf_mode_preferred_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct tmc_drvdata *drvdata = dev_get_drvdata(dev->parent); + + return sysfs_emit(buf, "%s\n", buf_modes_str[drvdata->etr_mode]); +} + +static ssize_t buf_mode_preferred_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct tmc_drvdata *drvdata = dev_get_drvdata(dev->parent); + struct etr_buf_hw buf_hw; + + get_etr_buf_hw(dev, &buf_hw); + if (sysfs_streq(buf, buf_modes_str[ETR_MODE_FLAT])) + drvdata->etr_mode = ETR_MODE_FLAT; + else if (sysfs_streq(buf, buf_modes_str[ETR_MODE_ETR_SG]) && buf_hw.has_etr_sg) + drvdata->etr_mode = ETR_MODE_ETR_SG; + else if (sysfs_streq(buf, buf_modes_str[ETR_MODE_CATU]) && buf_hw.has_catu) + drvdata->etr_mode = ETR_MODE_CATU; + else if (sysfs_streq(buf, buf_modes_str[ETR_MODE_AUTO])) + drvdata->etr_mode = ETR_MODE_AUTO; + else + return -EINVAL; + return size; +} +static DEVICE_ATTR_RW(buf_mode_preferred); + +static struct attribute *coresight_etr_attrs[] = { + &dev_attr_buf_modes_available.attr, + &dev_attr_buf_mode_preferred.attr, + NULL, +}; + +const struct attribute_group coresight_etr_group = { + .attrs = coresight_etr_attrs, +}; diff --git a/drivers/hwtracing/coresight/coresight-tmc.h b/drivers/hwtracing/coresight/coresight-tmc.h index b97da39652d2..e59d423a9749 100644 --- a/drivers/hwtracing/coresight/coresight-tmc.h +++ b/drivers/hwtracing/coresight/coresight-tmc.h @@ -135,6 +135,7 @@ enum etr_mode { ETR_MODE_FLAT, /* Uses contiguous flat buffer */ ETR_MODE_ETR_SG, /* Uses in-built TMC ETR SG mechanism */ ETR_MODE_CATU, /* Use SG mechanism in CATU */ + ETR_MODE_AUTO, /* Use the default mechanism */ }; struct etr_buf_operations; @@ -207,6 +208,7 @@ struct tmc_drvdata { enum tmc_mem_intf_width memwidth; u32 trigger_cntr; u32 etr_caps; + enum etr_mode etr_mode; struct idr idr; struct mutex idr_mutex; struct etr_buf *sysfs_buf; @@ -334,5 +336,6 @@ void tmc_etr_set_catu_ops(const struct etr_buf_operations *catu); void tmc_etr_remove_catu_ops(void); struct etr_buf *tmc_etr_get_buffer(struct coresight_device *csdev, enum cs_mode mode, void *data); +extern const struct attribute_group coresight_etr_group; #endif -- 2.25.1

1 year, 2 months

[RFC PATCH v2 0/7]Extending Coresight for Kernel panic and watchdog reset

by Linu Cherian

Changelog from v1: * V2 is a complete patchset with kernel panic trace tested on Linux 6.4. Details on testing with relevant console logs has been added for reference. * Two additional patches(patch 6 & 7) has been included to manage stopping of trace at the time of kernel panic. * Few bug fixes. TODO: * Add support to prevent overwriting of trace data captured in previous boot. (Suggested by James) * DTS properties for reserved memory might need some refinements, since Linux arm64 kernel has limitation on the number of reserved regions it supports(ie. 64). * ETM & CTI configuration using system configuration manager is a work progress. Currently ETM configuration is done in the driver(patch 7) and CTI configuration is done using CTI sysfs interface. * Reading tracedata from crashdump kernel is not tested. * Perf based trace capture is not tested. Introduction ============ This RFC is about extending Linux coresight driver support to address kernel panic and watchdog reset scenarios. This would help coresight users to debug kernel panic and watchdog reset with the help of coresight trace data. For simplicity, watchdog and kernel panic are addressed in separate sections. Coresight trace capture: Kernel panic ------------------------------------- From the coresight driver point of view, addressing the kernel panic situation has four main requirements. a. Support for allocation of trace buffer pages from reserved memory area. Platform can advertise this using a new device tree property added to relevant coresight nodes. b. Support for stopping coresight blocks at the time of panic c. Saving required metadata in the specified format d. Support for reading trace data captured at the time of panic Allocation of trace buffer pages from reserved RAM ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ A new optional device tree property "memory-region" is added to the ETR/ETF device nodes, that would give the base address and size of trace buffer. Static allocation of trace buffers would ensure that both IOMMU enabled and disabled cases are handled. Also, platforms that support persistent RAM will allow users to read trace data in the subsequent boot without booting the crashdump kernel. Note: For ETR sink devices, this reserved region will be used for both trace capture and trace data retrieval. For ETF sink devices, internal SRAM would be used for trace capture, and they would be synced to reserved region for retrieval. Note: Patches 1 & 2 adds support for this. Disabling coresight blocks at the time of panic ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In order to avoid the situation of losing relevant trace data after a kernel panic, it would be desirable to stop the coresight blocks at the time of panic. This can be achieved by configuring the comparator, CTI and sink devices as below, Comparator(triggers on kernel panic) --->External out --->CTI -- | ETR/ETF stop <------External In <-------------- Note: * Patch 6 provides the necessary ETR configuration. * Patch 7 provides the necessary ETM configuration. Saving metadata at the time of kernel panic ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Coresight metadata involves all additional data that are required for a successful trace decode in addition to the trace data. This involves ETR/ETF, ETE register snapshot etc. A new optional device property "memory-region" is added to the ETR/ETF/ETE device nodes for this. Note: Patches 3 & 4 adds support for this. Reading trace data captured at the time of panic ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Trace data captured at the time of panic, can be read from rebooted kernel or from crashdump kernel using the below mentioned interface. Note: Patch 5 adds support for this. Steps for reading trace data captured in previous boot ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1. cd /sys/bus/coresight/devices/tmc_etrXX/ 2. Change to special mode called, read_prevboot. #echo 1 > read_prevboot 3. Dump trace buffer data to a file, #dd if=/dev/tmc_etrXX of=~/cstrace.bin 4. Reset back to normal mode #echo 0 > read_prevboot General flow of trace capture and decode incase of kernel panic ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1. Enable source and sink on all the cores using the sysfs interface. ETR sink will have trace buffers allocated from reserved memory. 2. Run relevant tests. 3. On a kernel panic, all coresight blocks are disabled, necessary metadata is synced by kernel panic handler. System would eventually reboot or boot a crashdump kernel. 4. For platforms that supports crashdump kernel, raw trace data can be dumped using the coresight sysfs interface from the crashdump kernel itself. Persistent RAM is not a requirement in this case. 5. For platforms that supports persistent RAM, trace data can be dumped using the the coresight sysfs interface in the subsequent Linux boot. Crashdump kernel is not a requirement in this case. Persistent RAM ensures that trace data is intact across reboot. Coresight trace capture: Watchdog reset --------------------------------------- The main difference between addressing the watchdog reset and kernel panic case are below, a. Saving coresight metadata need to be taken care by the SCP(system control processor) firmware in the specified format, instead of kernel. b. Reserved memory region given by firmware for trace buffer and metadata has to be in persistent RAM. Note: This is a requirement for watchdog reset case but optional in kernel panic case. Watchdog reset can be supported only on platforms that meet the above two requirements. Testing Kernel panic on Linux 6.4 --------------------------------- 1. Configure CTI using sysfs interface #./cti_setup.sh #cat cti_setup.sh >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> cd /sys/bus/coresight/devices/ ap_cti_config () { #ETM trig out[0] trigger to Channel 0 echo 0 4 > channels/trigin_attach } etf_cti_config () { #ETF Flush in trigger from Channel 0 echo 0 1 > channels/trigout_attach echo 1 > channels/trig_filter_enable } etr_cti_config () { #ETR Flush in from Channel 0 echo 0 1 > channels/trigout_attach echo 1 > channels/trig_filter_enable } ctidevs=`find . -name "cti*"` for i in $ctidevs do cd $i connection=`find . -name "ete*"` if [ ! -z "$connection" ] then echo "AP CTI config for $i" ap_cti_config fi connection=`find . -name "tmc_etf*"` if [ ! -z "$connection" ] then echo "ETF CTI config for $i" etf_cti_config fi connection=`find . -name "tmc_etr*"` if [ ! -z "$connection" ] then echo "ETR CTI config for $i" etr_cti_config fi cd .. done <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< Note: CTI connections are SOC specific and hence the above script is just for reference. 2. Start Coresight tracing on cores 1 and 2 using sysfs interface 3. Run some application on core 1 #taskset -c 1 dd if=/dev/urandom of=/dev/null & 4. Invoke kernel panic on core 2 #echo 1 > /proc/sys/kernel/panic #taskset -c 2 echo c > /proc/sysrq-trigger 5. From rebooted kernel, enable previous boot mode #echo 1 > /sys/bus/coresight/devices/tmc_etr0/read_prevboot 6. Read trace data #dd if=/dev/tmc_etr0 of=/trace/cstrace.bin 7. Run opencsd decoder tools/scripts to generate the instruction trace. Core 1 instruction trace dump: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >> A etm4_enable_hw: ffff800008ae1dd4 CONTEXT EL2 etm4_enable_hw: ffff800008ae1dd4 I etm4_enable_hw: ffff800008ae1dd4: d503201f nop I etm4_enable_hw: ffff800008ae1dd8: d503201f nop I etm4_enable_hw: ffff800008ae1ddc: d503201f nop I etm4_enable_hw: ffff800008ae1de0: d503201f nop I etm4_enable_hw: ffff800008ae1de4: d503201f nop I etm4_enable_hw: ffff800008ae1de8: d503233f paciasp I etm4_enable_hw: ffff800008ae1dec: a9be7bfd stp x29, x30, [sp, #-32]! I etm4_enable_hw: ffff800008ae1df0: 910003fd mov x29, sp I etm4_enable_hw: ffff800008ae1df4: a90153f3 stp x19, x20, [sp, #16] I etm4_enable_hw: ffff800008ae1df8: 2a0003f4 mov w20, w0 I etm4_enable_hw: ffff800008ae1dfc: 900085b3 adrp x19, ffff800009b95000 <reserved_mem+0xc48> I etm4_enable_hw: ffff800008ae1e00: 910f4273 add x19, x19, #0x3d0 I etm4_enable_hw: ffff800008ae1e04: f8747a60 ldr x0, [x19, x20, lsl #3] E etm4_enable_hw: ffff800008ae1e08: b4000140 cbz x0, ffff800008ae1e30 <etm4_starting_cpu+0x50> I 149.039572921 etm4_enable_hw: ffff800008ae1e30: a94153f3 ldp x19, x20, [sp, #16] I 149.039572921 etm4_enable_hw: ffff800008ae1e34: 52800000 mov w0, #0x0 // #0 I 149.039572921 etm4_enable_hw: ffff800008ae1e38: a8c27bfd ldp x29, x30, [sp], #32 ..snip 149.052324811 chacha_block_generic: ffff800008642d80: 9100a3e0 add x0, I 149.052324811 chacha_block_generic: ffff800008642d84: b86178a2 ldr w2, [x5, x1, lsl #2] I 149.052324811 chacha_block_generic: ffff800008642d88: 8b010803 add x3, x0, x1, lsl #2 I 149.052324811 chacha_block_generic: ffff800008642d8c: b85fc063 ldur w3, [x3, #-4] I 149.052324811 chacha_block_generic: ffff800008642d90: 0b030042 add w2, w2, w3 I 149.052324811 chacha_block_generic: ffff800008642d94: b8217882 str w2, [x4, x1, lsl #2] I 149.052324811 chacha_block_generic: ffff800008642d98: 91000421 add x1, x1, #0x1 I 149.052324811 chacha_block_generic: ffff800008642d9c: f100443f cmp x1, #0x11 Core 2 instruction trace dump(kernel panic triggered core): ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ A etm4_enable_hw: ffff800008ae1dd4 CONTEXT EL2 etm4_enable_hw: ffff800008ae1dd4 I etm4_enable_hw: ffff800008ae1dd4: d503201f nop I etm4_enable_hw: ffff800008ae1dd8: d503201f nop I etm4_enable_hw: ffff800008ae1ddc: d503201f nop I etm4_enable_hw: ffff800008ae1de0: d503201f nop I etm4_enable_hw: ffff800008ae1de4: d503201f nop I etm4_enable_hw: ffff800008ae1de8: d503233f paciasp I etm4_enable_hw: ffff800008ae1dec: a9be7bfd stp x29, x30, [sp, #-32]! I etm4_enable_hw: ffff800008ae1df0: 910003fd mov x29, sp I etm4_enable_hw: ffff800008ae1df4: a90153f3 stp x19, x20, [sp, #16] I etm4_enable_hw: ffff800008ae1df8: 2a0003f4 mov w20, w0 I etm4_enable_hw: ffff800008ae1dfc: 900085b3 adrp x19, ffff800009b95000 <reserved_mem+0xc48> I etm4_enable_hw: ffff800008ae1e00: 910f4273 add x19, x19, #0x3d0 I etm4_enable_hw: ffff800008ae1e04: f8747a60 ldr x0, [x19, x20, lsl #3] E etm4_enable_hw: ffff800008ae1e08: b4000140 cbz x0, ffff800008ae1e30 <etm4_starting_cpu+0x50> I 149.046243445 etm4_enable_hw: ffff800008ae1e30: a94153f3 ldp x19, x20, [sp, #16] I 149.046243445 etm4_enable_hw: ffff800008ae1e34: 52800000 mov w0, #0x0 // #0 I 149.046243445 etm4_enable_hw: ffff800008ae1e38: a8c27bfd ldp x29, x30, [sp], #32 I 149.046243445 etm4_enable_hw: ffff800008ae1e3c: d50323bf autiasp E 149.046243445 etm4_enable_hw: ffff800008ae1e40: d65f03c0 ret A ete_sysreg_write: ffff800008adfa18 ..snip I 149.05422547 panic: ffff800008096300: a90363f7 stp x23, x24, [sp, #48] I 149.05422547 panic: ffff800008096304: 6b00003f cmp w1, w0 I 149.05422547 panic: ffff800008096308: 3a411804 ccmn w0, #0x1, #0x4, ne // ne = any N 149.05422547 panic: ffff80000809630c: 540001e0 b.eq ffff800008096348 <panic+0xe0> // b.none I 149.05422547 panic: ffff800008096310: f90023f9 str x25, [sp, #64] E 149.05422547 panic: ffff800008096314: 97fe44ef bl ffff8000080276d0 <panic_smp_self_stop> A panic: ffff80000809634c I 149.05422547 panic: ffff80000809634c: 910102d5 add x21, x22, #0x40 I 149.05422547 panic: ffff800008096350: 52800020 mov w0, #0x1 // #1 E 149.05422547 panic: ffff800008096354: 94166b8b bl ffff800008631180 <bust_spinlocks> N 149.054225518 bust_spinlocks: ffff800008631180: 340000c0 cbz w0, ffff800008631198 <bust_spinlocks+0x18> I 149.054225518 bust_spinlocks: ffff800008631184: f000a321 adrp x1, ffff800009a98000 <pbufs.0+0xbb8> I 149.054225518 bust_spinlocks: ffff800008631188: b9405c20 ldr w0, [x1, #92] I 149.054225518 bust_spinlocks: ffff80000863118c: 11000400 add w0, w0, #0x1 I 149.054225518 bust_spinlocks: ffff800008631190: b9005c20 str w0, [x1, #92] E 149.054225518 bust_spinlocks: ffff800008631194: d65f03c0 ret A panic: ffff800008096358 Linu Cherian (7): dt-bindings: arm: coresight-tmc: Add "memory-region" property ccoresight: tmc-etr: Add support to use reserved trace memory coresight: core: Add provision for panic callbacks coresight: tmc: Enable panic sync handling coresight: tmc: Add support for reading tracedata from previous boot coresight: tmc: Stop trace capture on FlIn coresight: etm4x: Configure ETM to trigger on panic .../bindings/arm/arm,coresight-tmc.yaml | 9 + drivers/hwtracing/coresight/coresight-core.c | 31 ++ .../coresight/coresight-etm4x-core.c | 17 +- drivers/hwtracing/coresight/coresight-etm4x.h | 26 ++ drivers/hwtracing/coresight/coresight-priv.h | 1 + .../hwtracing/coresight/coresight-tmc-core.c | 125 +++++++- .../hwtracing/coresight/coresight-tmc-etf.c | 151 ++++++++- .../hwtracing/coresight/coresight-tmc-etr.c | 286 +++++++++++++++++- drivers/hwtracing/coresight/coresight-tmc.h | 39 +++ include/linux/coresight.h | 11 + 10 files changed, 688 insertions(+), 8 deletions(-) -- 2.40.1

1 year, 3 months

[PATCH] coresight: tmc-etr: Disable warnings for allocation failures

by Suzuki K Poulose

Running the following command on Juno triggers the warning: $ perf record -e cs_etm// -m ,128M ... ------------[ cut here ]------------ WARNING: CPU: 1 PID: 412 at mm/page_alloc.c:4453 __alloc_pages+0x334/0x1420 CPU: 1 PID: 412 Comm: perf Not tainted 6.5.0-rc3+ #181 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Feb 1 2019 pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __alloc_pages+0x334/0x1420 lr : dma_common_alloc_pages+0x108/0x138 sp : ffffffc087fb7440 x29: ffffffc087fb7440 x28: 0000000000000000 x27: ffffffc07e48fba0 x26: 0000000000000001 x25: 000000000000000f x24: ffffffc081f24880 x23: 0000000000000cc0 x22: ffffff88012b6f08 x21: 0000000008000000 x20: ffffff8801433000 x19: 0000000000000000 x18: 0000000000000000 x17: ffffffc080316e5c x16: ffffffc07e46406c x15: ffffffc0803af580 x14: ffffffc08036b460 x13: ffffffc080025cbc x12: ffffffb8108c3fc4 x11: 1ffffff8108c3fc3 x10: 1ffffff810ff6eac x9 : 00000000f204f204 x8 : 000000000000f204 x7 : 00000000f2f2f2f2 x6 : 00000000f3f3f3f3 x5 : 0000000000000001 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000cc0 x1 : 0000000000000000 x0 : ffffffc085333000 Call trace: __alloc_pages+0x334/0x1420 dma_common_alloc_pages+0x108/0x138 __dma_alloc_pages+0xf4/0x108 dma_alloc_pages+0x18/0x30 tmc_etr_alloc_flat_buf+0xa0/0x190 [coresight_tmc] tmc_alloc_etr_buf.constprop.0+0x124/0x298 [coresight_tmc] alloc_etr_buf.constprop.0.isra.0+0x88/0xc8 [coresight_tmc] tmc_alloc_etr_buffer+0x164/0x2f0 [coresight_tmc] etm_setup_aux+0x32c/0x520 [coresight] rb_alloc_aux+0x29c/0x3f8 perf_mmap+0x59c/0xce0 mmap_region+0x340/0x10e0 do_mmap+0x48c/0x580 vm_mmap_pgoff+0x160/0x248 ksys_mmap_pgoff+0x1e8/0x278 __arm64_sys_mmap+0x8c/0xb8 With the flat mode, we only attempt to allocate large memory if there is an IOMMU connected to the ETR. If the allocation fails, we always have a fallback path and return an error if nothing else worked. So, suppress the warning for flat mode allocations. Cc: Mike Leach <mike.leach(a)linaro.org> Cc: James Clark <james.clark(a)arm.com> Cc: Anshuman Khandual <anshuman.khandual(a)arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose(a)arm.com> --- drivers/hwtracing/coresight/coresight-tmc-etr.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/hwtracing/coresight/coresight-tmc-etr.c b/drivers/hwtracing/coresight/coresight-tmc-etr.c index 66dc5f97a009..c8df8719f6a0 100644 --- a/drivers/hwtracing/coresight/coresight-tmc-etr.c +++ b/drivers/hwtracing/coresight/coresight-tmc-etr.c @@ -610,7 +610,8 @@ static int tmc_etr_alloc_flat_buf(struct tmc_drvdata *drvdata, flat_buf->vaddr = dma_alloc_noncoherent(real_dev, etr_buf->size, &flat_buf->daddr, - DMA_FROM_DEVICE, GFP_KERNEL); + DMA_FROM_DEVICE, + GFP_KERNEL | __GFP_NOWARN); if (!flat_buf->vaddr) { kfree(flat_buf); return -ENOMEM; -- 2.34.1

1 year, 3 months

[PATCH] coresight: Fix run time warnings while reusing ETR buffer

by Linu Cherian

Fix the below warning by avoding calls to tmc_etr_enable_hw, if we are reusing the ETR buffer for multiple sources in sysfs mode. echo 1 > /sys/bus/coresight/devices/tmc_etr0/enable_sink echo 1 > /sys/bus/coresight/devices/ete1/enable_source echo 1 > /sys/bus/coresight/devices/ete2/enable_source [ 166.918290] ------------[ cut here ]------------ [ 166.922905] WARNING: CPU: 4 PID: 2288 at drivers/hwtracing/coresight/coresight-tmc-etr.c:1037 tmc_etr_enable_hw+0xb0/0xc8 [ 166.933862] Modules linked in: [ 166.936911] CPU: 4 PID: 2288 Comm: bash Not tainted 6.5.0-rc7 #132 [ 166.943084] Hardware name: Marvell CN106XX board (DT) [ 166.948127] pstate: 834000c9 (Nzcv daIF +PAN -UAO +TCO +DIT -SSBS BTYPE=--) [ 166.955083] pc : tmc_etr_enable_hw+0xb0/0xc8 [ 166.959345] lr : tmc_enable_etr_sink+0x134/0x210 snip.. 167.038545] Call trace: [ 167.040982] tmc_etr_enable_hw+0xb0/0xc8 [ 167.044897] tmc_enable_etr_sink+0x134/0x210 [ 167.049160] coresight_enable_path+0x160/0x278 [ 167.053596] coresight_enable+0xd4/0x298 [ 167.057510] enable_source_store+0x54/0xa0 [ 167.061598] dev_attr_store+0x20/0x40 [ 167.065254] sysfs_kf_write+0x4c/0x68 [ 167.068909] kernfs_fop_write_iter+0x128/0x200 [ 167.073345] vfs_write+0x1ac/0x2f8 [ 167.076739] ksys_write+0x74/0x110 [ 167.080132] __arm64_sys_write+0x24/0x38 [ 167.084045] invoke_syscall.constprop.0+0x58/0xf8 [ 167.088744] do_el0_svc+0x60/0x160 [ 167.092137] el0_svc+0x40/0x170 [ 167.095273] el0t_64_sync_handler+0x100/0x130 [ 167.099621] el0t_64_sync+0x190/0x198 [ 167.103277] ---[ end trace 0000000000000000 ]--- -bash: echo: write error: Device or resource busy Fixes: 296b01fd106e ("coresight: Refactor out buffer allocation function for ETR") Signed-off-by: Linu Cherian <lcherian(a)marvell.com> --- .../hwtracing/coresight/coresight-tmc-etr.c | 24 ++++++++++--------- 1 file changed, 13 insertions(+), 11 deletions(-) diff --git a/drivers/hwtracing/coresight/coresight-tmc-etr.c b/drivers/hwtracing/coresight/coresight-tmc-etr.c index 766325de0e29..6a79c4dc09f2 100644 --- a/drivers/hwtracing/coresight/coresight-tmc-etr.c +++ b/drivers/hwtracing/coresight/coresight-tmc-etr.c @@ -1172,16 +1172,6 @@ static struct etr_buf *tmc_etr_get_sysfs_buffer(struct coresight_device *csdev) goto out; } - /* - * In sysFS mode we can have multiple writers per sink. Since this - * sink is already enabled no memory is needed and the HW need not be - * touched, even if the buffer size has changed. - */ - if (drvdata->mode == CS_MODE_SYSFS) { - atomic_inc(&csdev->refcnt); - goto out; - } - /* * If we don't have a buffer or it doesn't match the requested size, * use the buffer allocated above. Otherwise reuse the existing buffer. @@ -1203,7 +1193,7 @@ static struct etr_buf *tmc_etr_get_sysfs_buffer(struct coresight_device *csdev) static int tmc_enable_etr_sink_sysfs(struct coresight_device *csdev) { - int ret; + int ret = 0; unsigned long flags; struct tmc_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); struct etr_buf *sysfs_buf = tmc_etr_get_sysfs_buffer(csdev); @@ -1212,12 +1202,24 @@ static int tmc_enable_etr_sink_sysfs(struct coresight_device *csdev) return PTR_ERR(sysfs_buf); spin_lock_irqsave(&drvdata->spinlock, flags); + + /* + * In sysFS mode we can have multiple writers per sink. Since this + * sink is already enabled no memory is needed and the HW need not be + * touched, even if the buffer size has changed. + */ + if (drvdata->mode == CS_MODE_SYSFS) { + atomic_inc(&csdev->refcnt); + goto out; + } + ret = tmc_etr_enable_hw(drvdata, sysfs_buf); if (!ret) { drvdata->mode = CS_MODE_SYSFS; atomic_inc(&csdev->refcnt); } +out: spin_unlock_irqrestore(&drvdata->spinlock, flags); if (!ret) -- 2.41.0

1 year, 3 months

[PATCH v8 00/13] Add support to configure TPDM DSB subunit

by Tao Zhang

Introduction of TPDM DSB subunit DSB subunit is responsible for creating a dataset element, and is also optionally responsible for packing it to fit multiple elements on a single ATB transfer if possible in the configuration. The TPDM Core Datapath requests timestamps be stored by the TPDA and then delivering ATB sized data (depending on ATB width and element size, this could be smaller or larger than a dataset element) to the ATB Mast FSM. The DSB subunit must be configured prior to enablement. This series adds support for TPDM to configure the configure DSB subunit. Once this series patches are applied properly, the new tpdm nodes for should be observed at the tpdm path /sys/bus/coresight/devices/tpdm* which supports DSB subunit. e.g. root@qemuarm64:/sys/devices/platform/soc@0/6c08000.tpdm/tpdm1# ls -l drwxr-xr-x 2 root root 0 Jan 1 00:00 connections drwxr-xr-x 2 root root 0 Jan 1 00:00 dsb_edge -rw-r--r-- 1 root root 4096 Jan 1 00:00 dsb_mode drwxr-xr-x 2 root root 0 Jan 1 00:00 dsb_msr drwxr-xr-x 2 root root 0 Jan 1 00:00 dsb_patt -rw-r--r-- 1 root root 4096 Jan 1 00:00 dsb_patt_ts -rw-r--r-- 1 root root 4096 Jan 1 00:00 dsb_patt_type drwxr-xr-x 2 root root 0 Jan 1 00:00 dsb_trig_patt -rw-r--r-- 1 root root 4096 Jan 1 00:00 dsb_trig_ts -rw-r--r-- 1 root root 4096 Jan 1 00:00 dsb_trig_type -rw-r--r-- 1 root root 4096 Jan 1 00:02 enable_source --w------- 1 root root 4096 Jan 1 00:00 integration_test drwxr-xr-x 2 root root 0 Jan 1 00:00 power --w------- 1 root root 4096 Jan 1 00:02 reset_dataset lrwxrwxrwx 1 root root 0 Apr 5 2021 subsystem -> ../../../../../bus/coresight -rw-r--r-- 1 root root 4096 Apr 5 2021 uevent -r--r--r-- 1 root root 4096 Jan 1 00:00 waiting_for_supplier We can use the commands are similar to the below to configure the TPDMs which support DSB subunit. Enable coresight sink first. echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink echo 1 > /sys/bus/coresight/devices/tpdm1/reset_dataset echo 0x3 > /sys/bus/coresight/devices/tpdm1/dsb_edge/ctrl_idx echo 0x1 > /sys/bus/coresight/devices/tpdm1/dsb_edge/ctrl_mask echo 0x0 > /sys/bus/coresight/devices/tpdm1/dsb_edge/ctrl_val echo 1 > /sys/bus/coresight/devices/tpdm1/dsb_patt_ts echo 1 > /sys/bus/coresight/devices/tpdm1/dsb_patt_type echo 0 > /sys/bus/coresight/devices/tpdm1/dsb_trig_ts echo 0xFFFFFFFF > /sys/bus/coresight/devices/tpdm1/dsb_patt/tpmr5 echo 0xFFFFFFFF > /sys/bus/coresight/devices/tpdm1/dsb_trig_patt/xpr2 echo 1 > /sys/bus/coresight/devices/tpdm1/enable_source TPDM_DSB commit tree: https://git.codelinaro.org/clo/linux-kernel/coresight/-/tree/tpdm-dsb-v8 https://git.codelinaro.org/clo/linux-kernel/coresight/-/commits/tpdm-dsb-v8 Changes in V8: 1. Refine the function "tpda_set_element_size" and rename it to "tpda_get_element_size" in the patch#4. -- Suzuki K Poulose 2. Refine the functioin "tpda_enable_port" in the patch#4. -- Suzuki K Poulose 3. Write a helper to check if the TPDM has DSB dataset in the patch#5. -- Suzuki K Poulose 4. Move the function "tpdm_reset_datasets" to "datasets_setup" to call in the patch#5. -- Suzuki K Poulose 5. Refine the comment of DSB in "tpdm_drvdata" in the patch#5. -- Suzuki K Poulose 6. Refine the comments in the documents for this patch series. -- Suzuki K Poulose 7. Adjust the code alignment in this patch series. -- Suzuki K Poulose 8. Combine the mode related functions to one in the patch#8. -- Suzuki K Poulose 9. Refine the R/W functions of "dsb_mode" in the patch#8. -- Suzuki K Poulose 10. Adjust the macros of mode in the TPDM header file in the patch#8. -- Suzuki K Poulose 11. Remove the unused code and fix the warnings in compiling for the patch#9. -- kernel test robot 12. Use the following sysfs nodes to read/set edge control related value in the patch#9. dsb_edge/ \- ctrl_idx -> Set the index number \- ctrl_val -> Set the edge control value \- ctrl_mask -> Set the edge control mask \- edcr0 ... edcr15 -> Read the edge control value \- edcmr0 ... edcmr7 -> Read the edge control mask -- Suzuki K Poulose 13. Use the following sysfs nodes to read/set DSB trigger pattern value and mask in the patch#10. dsb_trig_patt/ \- xpr0 ... xpr15 -> (RW) Set/Get the value \- xpmr0 ... xpmr7 -> (RW) Set/Get the mask -- Suzuki K Poulose 14. Use the following sysfs nodes to read/set DSB pattern value and mask in the patch#11. dsb_patt/ \- tpr0 ... tpr15 -> (RW) Set/Get the value \- tpmr0 ... tpmr7 -> (RW) Set/Get the mask -- Suzuki K Poulose 15. Add "Acked-by" tag to the patch#12. -- Rob Herring 16. Use the following sysfs nodes to read/set DSB MSR in the patch#13. dsb_msr/ \- msr0 ... msr31 -> (RW) Set/Get the value -- Suzuki K Poulose 17. Create the maximal number of DSB MSR sysfs nodes if the TPDM supports DSB MSR. Write the values set by user space to the DSB MSR according to the number of MSR supported by the TPDM. -- Suzuki K Poulose Changes in V7: 1. Since the "One value" limitation on SysFs file usage, add the nodes to read/write the index number for configuring the DSB TPDM. The following index number nodes are added. "dsb_edge_ctrl_idx" in the patch #9 "dsb_trig_patt_idx" in the patch #10 "dsb_patt_idx" in the patch #11 "dsb_msr_idx" in the patch #13 -- Suzuki K Poulose Changes in V6: 1. Align the code to fix the styling issue. -- Suzuki K Poulose Changes in V5: 1. Correct data type for DSB element size in dt-bindings patch. 2. Refine the recursive function "tpda_set_element_size". -- Suzuki K Poulose 3. Get return value of the function "__tpda_enable" in "tpda_enable". -- Suzuki K Poulose 4. Refine the comments on "dsb_esize". -- Suzuki K Poulose 5. Split the chage that introduce the subtype "SUBTYPE_SOURCE_TPDM" to Coresight driver. -- Suzuki K Poulose 6. Inline the trigger type setting to "tpdm_enable_dsb" simply. -- Suzuki K Poulose 7. Split the change that remove the needless CS_{UN,}LOCK in the function "tpdm_datasets_setup". -- Suzuki K Poulose 8. Remove the disablement step in the reset node. -- Suzuki K Poulose 9. Update the kernel version to 6.5 in the sysfs document. -- Suzuki K Poulose 10. Remove the needless check in "tpdm_dsb_is_visible". -- Suzuki K Poulose 11. Change the macro to mask the mode of DSB TPDM. -- Suzuki K Poulose 12. Add a check to make sure "sysfs_emit_at" calling will not cause overflow. -- Suzuki K Poulose 13. Change the macro to get "edge_ctrl" value. -- Suzuki K Poulose 14. Remove the needless comments in the sysfs document. -- Suzuki K Poulose 15. Replace "TPDM_DSB_MAX_PATT" with "drvdata->dsb->msr_num" in "dsb_msr_show". -- Suzuki K Poulose 16. Update the check of MSR number in "dsb_msr_store". -- Suzuki K Poulose 17. Write data to the MSR registers in the DSB TPDM enablement function. -- Suzuki K Poulose Changes in V4: 1. Change the range of the property "qcom,dsb-element-size", and change the type to enumeration. -- Suzuki K Poulose, Krzysztof Kozlowski 2. Change dsb_esize from 32 bits to 8 bits. -- Suzuki K Poulose 3. Update the function tpda_set_element_size since James has updated the dependency series. Meanwhile, it will send out a warning if it detects more than one TPDM from the same TPDA input port. -- Suzuki K Poulose 4. Add a source_sub_type for TPDM to distinguish TPDM from the other coresight source. -- Suzuki K Poulose 5. Return error if the element size is not configured on devicetree in TPDA enablement. -- Suzuki K Poulose 6. Move memory allocation from "tpdm_init_datasets" to "tpdm_datasets_setup". Rename "tpdm_init_datasets" as "tpdm_reset_datasets". -- Suzuki K Poulose 7. Replace "coresight_disable" with "coresight_disable_source" to disable the TPDM in resetting. -- Suzuki K Poulose 8. Make sure "drvdata" is not NULL pointer before using it. -- Suzuki K Poulose 9. Change "set_dsb_cycacc_mode" to "set_dsb_test_mode" since cycle accurate mode is not supported on the current targets. It is replaced by test mode. 10. Document the value of "dsb_mode". -- Suzuki K Poulose 11. Macros are used to replace the formulas on dsb edge control nodes. -- Suzuki K Poulose 12. Document the values of "dsb_trig_patt_val" and "dsb_trig_patt_mask". -- Suzuki K Poulose 13. Combine two pattern related loops to one. And move DSB TIER register configurations to the new function "set_dsb_tier". -- Suzuki K Poulose 14. Rename the property "qcom,dsb_msr_num" to "qcom,dsb-msrs-num". -- Suzuki K Poulose, Krzysztof Kozlowski Changes in V3: 1. Move the property "qcom,dsb-element-size" to TPDM devicetree and update the TPDM yaml file for this item. -- Suzuki K Poulose 2. Add the error message when the DSB element size is not set to 32-bit or 64-bit. -- Suzuki K Poulose 3. Add more information to the comments of patch #3 -- Suzuki K Poulose 4. Combine the value updates to the TPDM_DSB_CR for TPDM. -- Suzuki K Poulose 5. Remove the function "tpdm_datasets_alloc", and fold its code to a new function "tpdm_init_datasets". It will complete the initialization of TPDM. -- Suzuki K Poulose 6. Change the method of qualifying input values. -- Suzuki K Poulose 7. Add the documentation of the new sysfs handles. -- Suzuki K Poulose 8. Provide the separate handles for the "mode bits". -- Suzuki K Poulose Changes in V2: 1. Change the name of the property "qcom,dsb-elem-size" to "qcom,dsb-element-size" -- Suzuki K Poulose 2. Update the TPDA yaml file for the item "qcom,dsb-elem-size". -- Krzysztof Kozlowski 3. Add the full name of DSB in the description of the item "qcom,dsb-elem-size". -- Rob Herring Changes in V1: 1. Change the definition of the property "qcom,dsb-elem-size" from "uint32-array" to "uint32-matrix". -- Krzysztof Kozlowski 2. Add the full name of DSB. -- Rob Herring 3. Deal with 2 entries in an iteration in TPDA driver. -- Suzuki K Poulose 4. Divide the function "tpdm_datasets_alloc" into two functions, "tpdm_datasets_setup" and "tpdm_datasets_alloc". 5. Detecte the input string with the conventional semantics automatically, and constrain the size of the input value. -- Suzuki K Poulose 6. Use the hook function "is_visible()" to hide the DSB related knobs if the data sets are missing. -- Suzuki K Poulose 7. Use the macros "FIELD_GET" and "FIELD_PREP" to set the values. -- Suzuki K Poulose 8. Update the definition of the macros in TPDM driver. 9. Update the comments of the values for the nodes which are for DSB element creation and onfigure pattern match output. -- Suzuki K Poulose 10. Use API "sysfs_emit" to "replace scnprintf". -- Suzuki K Poulose Tao Zhang (13): coresight-tpdm: Remove the unnecessary lock dt-bindings: arm: Add support for DSB element size coresight-tpdm: Introduce TPDM subtype to TPDM driver coresight-tpda: Add DSB dataset support coresight-tpdm: Initialize DSB subunit configuration coresight-tpdm: Add reset node to TPDM node coresight-tpdm: Add nodes to set trigger timestamp and type coresight-tpdm: Add node to set dsb programming mode coresight-tpdm: Add nodes for dsb edge control coresight-tpdm: Add nodes to configure pattern match output coresight-tpdm: Add nodes for timestamp request dt-bindings: arm: Add support for DSB MSR register coresight-tpdm: Add nodes for dsb msr support .../ABI/testing/sysfs-bus-coresight-devices-tpdm | 159 +++++ .../bindings/arm/qcom,coresight-tpdm.yaml | 20 + drivers/hwtracing/coresight/coresight-core.c | 3 + drivers/hwtracing/coresight/coresight-tpda.c | 126 +++- drivers/hwtracing/coresight/coresight-tpda.h | 2 + drivers/hwtracing/coresight/coresight-tpdm.c | 682 ++++++++++++++++++++- drivers/hwtracing/coresight/coresight-tpdm.h | 165 +++++ include/linux/coresight.h | 1 + 8 files changed, 1136 insertions(+), 22 deletions(-) -- 2.7.4

1 year, 3 months

[PATCH v1 0/2] perf cs-etm: Improve timestamp tracing

by Leo Yan

This patch series is to improve timestamp handling in per-thread mode. The current code doesn't validate timestamp and always return success for per-thread mode, for a sane implementation, the first patch is to allow validation timestamp tracing in per-thread mode. The second patch is to respect timestamp option "--timestamp" or "-T", when users set this option, the tool will automatically enable hardware timestamp tracing in Arm CoreSight. Leo Yan (2): perf cs-etm: Validate timestamp tracing in per-thread mode perf cs-etm: Respect timestamp option tools/perf/arch/arm/util/cs-etm.c | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-) -- 2.34.1

1 year, 3 months

[PATCH] MAINTAINERS: Remove myself as a Arm CoreSight reviewer

by Leo Yan

I haven't done any meaningful work for a long while on Arm CoreSight and it's unlikely I'll be able to do related work in the future. Remove myself from the Arm CoreSight "Reviewers" list. Signed-off-by: Leo Yan <leo.yan(a)linaro.org> --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index e0ad886d3163..342b8a3e19e3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2102,7 +2102,6 @@ N: digicolor ARM/CORESIGHT FRAMEWORK AND DRIVERS M: Suzuki K Poulose <suzuki.poulose(a)arm.com> R: Mike Leach <mike.leach(a)linaro.org> -R: Leo Yan <leo.yan(a)linaro.org> L: coresight(a)lists.linaro.org (moderated for non-subscribers) L: linux-arm-kernel(a)lists.infradead.org (moderated for non-subscribers) S: Maintained -- 2.39.2

1 year, 3 months

Re: [PATCH V2] coresight: tmc: Make etr buffer mode user configurable from sysfs

by Suzuki K Poulose

Cc: Sudeep Hi Steve On 28/08/2023 17:35, Steve Clevenger wrote: > > Hi Suzuki, > > On 8/27/2023 2:35 PM, Suzuki K Poulose wrote: >> Hi Steve >> >> On 26/08/2023 01:14, Steve Clevenger wrote: >>> >>> Unfortunately, I tested with the original patch not [PATCH V2]. I've >>> remedied this. My results below: >>> >>> [root@sut01sys-b212 linux]# cat >>> /sys/devices/system/cpu/cpu123/ARMHC501\:23/tmc_etr35/buf_modes_available >>> auto flat catu >>> [root@sut01sys-b212 linux]# cat >>> /sys/devices/system/cpu/cpu123/ARMHC501\:23/tmc_etr35/buf_mode_preferred >>> auto >>> [root@sut01sys-b212 linux]# echo "catu" > >>> /sys/devices/system/cpu/cpu123/ARMHC501\:23/tmc_etr35/buf_mode_preferred >>> [root@sut01sys-b212 linux]# cat >>> /sys/devices/system/cpu/cpu123/ARMHC501\:23/tmc_etr35/buf_mode_preferred >>> catu >>> >>> As with the V1 patch, auto defaults to catu. >>> >>> I expected to see tmc-sg (former default) as an available mode, but do >>> not. As I recall, the buffer mode defaulted to ETR scatter-gather prior >>> to this patch. Must this capability now be explicitly advertised? I've >>> seen this done as "arm,scatter-gather" in device trees, but not used by >>> Ampere. Perhaps someone can enlighten me. >> >> Yes, you must add that property to the TMC-ETR node (for both DT and >> ACPI). In the past, almost all of the TMC-ETRs (except Juno board) >> locked up the system while using the SG mode (due to the interconnect >> issues, something to do with the transaction). Thus, we decided to >> add a property explicitly enabling this for a given platform. >> >> When you mentioned, it was using TMC-ETR SG mode, how did you verify >> this ? Please be aware that the table allocation code etc are shared >> by both TMC-SG and CATU. >> > > You might recall how this started. I had no way to test the CATU due to > the order the ETR modes defaulted (Flat, ETR-SG, CATU). For test > purposes, I programmatically swapped the ETR-SG/CATU order and could > then verify CATU operation by the driver calling into CATU code. This So, were you using the DT based boot for the above runs ? > suggests Flat mode was bypassed, and the driver defaulted to ETR-SG > prior to this hack. This didn't offer the user any control, hence my > feature request. Note that most of the early Ampere self-hosted trace > collection used ETR-SG. Now I can't select it. > > How is this property described in the ACPI? The "ACPI for CoreSight™ 1.1 > Platform Design Document" (DEN0067) doesn't describe this. This is not specified in the ACPI platform design document. I can get it fixed. Ideally we need a property describing that the scatter-gather mode is safe to use. DT uses "arm,scatter-gather" property [0] and this is what we now expect in the ACPI based systems too. https://elixir.bootlin.com/linux/latest/source/Documentation/devicetree/bin… Does it sound fine ? Suzuki > > Thanks, > Steve > > >> Kind regards >> Suzuki >> >>> >>> Steve C. >>> >>> On 8/23/2023 4:10 PM, Steve Clevenger wrote: >>>> >>>> Here's some quick feedback. My system shows two modes available; auto >>>> catu >>>> >>>> etr_buf_mode_current is writable. I expected to see tmc-sg (former >>>> default) listed in etr_buf_modes_available but it doesn't show up. >>>> >>>> Note that both the auto and catu etr_buf_mode_current settings default >>>> to catu. My understanding is auto should revert to the default behavior. >>>> On my system the default was tmc-sg. >>>> >>>> More later. >>>> >>>> [root@sut01sys-b212 kernel]# cat >>>> /sys/devices/system/cpu/cpu20/ARMHC501\:60/tmc_etr96/etr_buf_modes_available >>>> >>>> auto catu >>>> [root@sut01sys-b212 kernel]# cat >>>> /sys/devices/system/cpu/cpu20/ARMHC501\:60/tmc_etr96/etr_buf_mode_current >>>> catu >>>> [root@sut01sys-b212 kernel]# echo "catu" > >>>> /sys/devices/system/cpu/cpu20/ARMHC501\:60/tmc_etr96/etr_buf_mode_current >>>> [root@sut01sys-b212 kernel]# cat >>>> /sys/devices/system/cpu/cpu20/ARMHC501\:60/tmc_etr96/etr_buf_mode_current >>>> catu >>>> >>>> Steve C. >>>> >>>> >>>> On 8/21/2023 12:40 PM, Steve Clevenger wrote: >>>>> >>>>> Hi Suzuki, >>>>> >>>>> I may be able to test it this week. You've already pointed me at the >>>>> patch thread(s). The main holdup is I need to merge the 6.6 pending >>>>> platform work in order to use the Ampere ACPI. I couldn't get these >>>>> patches to apply directly to 6.4 last I tried. >>>>> >>>>> Steve C. >>>>> >>>>> On 8/18/2023 2:39 AM, Suzuki K Poulose wrote: >>>>>> Cc: Steve >>>>>> >>>>>> Steve, >>>>>> >>>>>> Are you able to test this with CATU ? >>>>>> >>>>>> >>>>>> On 18/08/2023 09:21, Anshuman Khandual wrote: >>>>>>> Currently TMC-ETR automatically selects the buffer mode from all >>>>>>> available >>>>>>> methods in the following sequentially fallback manner - also in that >>>>>>> order. >>>>>>> >>>>>>> 1. FLAT mode with or without IOMMU >>>>>>> 2. TMC-ETR-SG (scatter gather) mode when available >>>>>>> 3. CATU mode when available >>>>>>> >>>>>>> But this order might not be ideal for all situations. For example if >>>>>>> there >>>>>>> is a CATU connected to ETR, it may be better to use TMC-ETR scatter >>>>>>> gather >>>>>>> method, rather than CATU. But hard coding such order changes will >>>>>>> prevent >>>>>>> us from testing or using a particular mode. This change provides >>>>>>> following >>>>>>> new sysfs tunables for the user to control TMC-ETR buffer mode >>>>>>> explicitly, >>>>>>> if required. This adds following new sysfs files for buffer mode >>>>>>> selection >>>>>>> purpose explicitly in the user space. >>>>>>> >>>>>>> /sys/bus/coresight/devices/tmc_etr<N>/buf_modes_available >>>>>>> /sys/bus/coresight/devices/tmc_etr<N>/buf_mode_preferred >>>>>>> >>>>>>> $ cat buf_modes_available >>>>>>> auto flat tmc-sg catu ------------------> Supported TMC-ETR buffer >>>>>>> modes >>>>>>> >>>>>>> $ echo catu > buf_mode_preferred -------> Explicit buffer mode >>>>>>> request >>>>>>> >>>>>>> But explicit user request has to be within supported ETR buffer modes >>>>>>> only. >>>>>>> These sysfs interface files are exclussive to ETR, and hence these >>>>>>> are >>>>>>> not >>>>>>> available for other TMC devices such as ETB or ETF etc. >>>>>>> >>>>>>> A new auto' mode (i.e ETR_MODE_AUTO) has been added to help fallback >>>>>>> to the >>>>>>> existing default behaviour, when user provided preferred buffer mode >>>>>>> fails. >>>>>>> ETR_MODE_FLAT and ETR_MODE_AUTO are always available as preferred >>>>>>> modes. >>>>>>> >>>>>>> Cc: Suzuki K Poulose <suzuki.poulose(a)arm.com> >>>>>>> Cc: Mike Leach <mike.leach(a)linaro.org> >>>>>>> Cc: James Clark <james.clark(a)arm.com> >>>>>>> Cc: Leo Yan <leo.yan(a)linaro.org> >>>>>>> Cc: Alexander Shishkin <alexander.shishkin(a)linux.intel.com> >>>>>>> Cc: coresight(a)lists.linaro.org >>>>>>> Cc: linux-arm-kernel(a)lists.infradead.org >>>>>>> Cc: linux-kernel(a)vger.kernel.org >>>>>>> Signed-off-by: Anshuman Khandual <anshuman.khandual(a)arm.com> >>>>>>> --- >>>>>>> This applies on v6.5-rc6 >>>>>>> >>>>>>> Changes in V2: >>>>>>> >>>>>>> - Renamed sysfs file etr_buf_modes_available as buf_modes_available >>>>>>> - Renamed sysfs file buf_mode_current as buf_mode_preferred >>>>>>> - Renamed etr_supports_flat_mode() as etr_can_use_flat_mode() >>>>>>> - Renamed coresight_tmc_groups[] as coresight_etf_groups[] >>>>>>> - Reused coresight_tmc_group[] for trigger_cntr and buffer_size >>>>>>> - Fallback trying ETR_MODE_AUTO when user preferred mode fails >>>>>>> - Moved ETR sysfs details into coresight-tmc-etr.c >>>>>>> - Dropped etr_can_use_flat_mode() check while offering ETR_MODE_FLAT >>>>>>> in sysfs >>>>>>> - Moved struct etr_buf_hw inside coresight-tmc-etr.c >>>>>>> - Moved get_etr_buf_hw() and etr_can_use_flat_mode() inside >>>>>>> coresight-tmc-etr.c >>>>>>> - Updated month in >>>>>>> Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc >>>>>>> >>>>>>> Changes in V1: >>>>>>> >>>>>>> https://lore.kernel.org/all/20230728084837.276551-1-anshuman.khandual@arm.c… >>>>>>> >>>>>>> .../testing/sysfs-bus-coresight-devices-tmc | 16 +++ >>>>>>> .../hwtracing/coresight/coresight-tmc-core.c | 15 ++- >>>>>>> .../hwtracing/coresight/coresight-tmc-etr.c | 111 >>>>>>> ++++++++++++++++-- >>>>>>> drivers/hwtracing/coresight/coresight-tmc.h | 3 + >>>>>>> 4 files changed, 131 insertions(+), 14 deletions(-) >>>>>> >>>>>> >>>>>> Looks good to me. >>>>>> >>>>>> Suzuki >>>>>> >>>>>> >>

1 year, 4 months

[PATCH V6 0/2] coresight: trbe: Enable ACPI based devices

by Anshuman Khandual

These are remaining coresight patches after fixing the merge conflict which applies on coresight/next coresight-next-v6.6. Changes in V6: - Fixed te merge conflict Changes in V5: https://lore.kernel.org/all/20230817055405.249630-1-anshuman.khandual@arm.c… - Detected zeroed parsed GSI as a mismatch but handled all zero scenario - Changed condition check from 'if (ret < 0)' into a 'if (ret)' - Dropped pr_warn() message after platform_device_register() Changes in V4: https://lore.kernel.org/all/20230808082247.383405-1-anshuman.khandual@arm.c… - Added in-code comment for arm_trbe_device_probe() - Reverted back using IS_ENABLED() for SPE PMU platform device - Replaced #ifdef with IS_ENABLED() for TRBE platform device - Protected arm_trbe_acpi_match with ACPI_PTR() - preventing a build failure when CONFIG_ACPI is not enabled - Added __maybe_unused for arm_acpi_register_pmu_device() and dropped config checks with IS_ENABLED() Changes in V3: https://lore.kernel.org/all/20230803055652.1322801-1-anshuman.khandual@arm.… - Changed ARMV8_TRBE_PDEV_NAME from "arm-trbe-acpi" into "arm,trbe" - Dropped local variable 'matched' - Replaced 'matched' with 'valid gsi' as being already matched once - Moved find_acpi_cpu_topology_hetero_id() outside conditional check Changes in V2: https://lore.kernel.org/all/20230801094052.750416-1-anshuman.khandual@arm.c… - Refactored arm_spe_acpi_register_device() in a separate patch - Renamed trbe_acpi_resources as trbe_resources - Renamed trbe_acpi_dev as trbe_dev Changes in V1: https://lore.kernel.org/all/20230728112733.359620-1-anshuman.khandual@arm.c… Cc: Sami Mujawar <sami.mujawar(a)arm.com> Cc: Catalin Marinas <catalin.marinas(a)arm.com> Cc: Will Deacon <will(a)kernel.org> Cc: Mark Rutland <mark.rutland(a)arm.com> Cc: Suzuki K Poulose <suzuki.poulose(a)arm.com> Cc: Mike Leach <mike.leach(a)linaro.org> Cc: Leo Yan <leo.yan(a)linaro.org> Cc: Alexander Shishkin <alexander.shishkin(a)linux.intel.com> Cc: James Clark <james.clark(a)arm.com> Cc: coresight(a)lists.linaro.org Cc: linux-arm-kernel(a)lists.infradead.org Cc: linux-kernel(a)vger.kernel.org Anshuman Khandual (2): coresight: trbe: Add a representative coresight_platform_data for TRBE coresight: trbe: Enable ACPI based TRBE devices drivers/hwtracing/coresight/coresight-trbe.c | 23 ++++++++++++++++++-- drivers/hwtracing/coresight/coresight-trbe.h | 2 ++ 2 files changed, 23 insertions(+), 2 deletions(-) -- 2.25.1

1 year, 4 months

Re: [PATCH] coresight: tmc-etr: Don't fail probe when non-secure access is disabled

by Suzuki K Poulose

Hi Yabin On 29/08/2023 22:16, Yabin Cui wrote: >> How can this be enabled ? Why not enable it before probing the ETR ? > How can a user know if this has been done or not ? > > Pixel devices (like Pixel 6, 7) support enabling some debugging features > (including granting non-secure access to ETM/ETR) even on devices with > secure boot. It is only used internally and has strict requirements, > needing to connect to a server to verify identification after booting. > So it can't be established when probing ETR at device boot time. Are you not able to build the coresight drivers as modules and load them after the device has been authenticated and NS access enabled ? Running a trace session without NS access enabled on a normal device would be asking for trouble in the "normal world". Suzuki > > > On Sun, Aug 27, 2023 at 2:37 PM Suzuki K Poulose <suzuki.poulose(a)arm.com> wrote: >> >> On 26/08/2023 00:39, Yabin Cui wrote: >>> Because the non-secure access can be enabled later on some devices. >> >> How can this be enabled ? Why not enable it before probing the ETR ? >> How can a user know if this has been done or not ? It is asking for >> trouble to continue without this. >> >> Suzuki >> >>> >>> Signed-off-by: Yabin Cui <yabinc(a)google.com> >>> --- >>> drivers/hwtracing/coresight/coresight-tmc-core.c | 2 +- >>> 1 file changed, 1 insertion(+), 1 deletion(-) >>> >>> diff --git a/drivers/hwtracing/coresight/coresight-tmc-core.c b/drivers/hwtracing/coresight/coresight-tmc-core.c >>> index c106d142e632..5ebfd12b627b 100644 >>> --- a/drivers/hwtracing/coresight/coresight-tmc-core.c >>> +++ b/drivers/hwtracing/coresight/coresight-tmc-core.c >>> @@ -370,7 +370,7 @@ static int tmc_etr_setup_caps(struct device *parent, u32 devid, void *dev_caps) >>> struct tmc_drvdata *drvdata = dev_get_drvdata(parent); >>> >>> if (!tmc_etr_has_non_secure_access(drvdata)) >>> - return -EACCES; >>> + dev_warn(parent, "TMC ETR doesn't have non-secure access\n"); >>> >>> /* Set the unadvertised capabilities */ >>> tmc_etr_init_caps(drvdata, (u32)(unsigned long)dev_caps); >>

1 year, 4 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

CoreSight August 2023