CoreSight

coresight@lists.linaro.org

3 participants
2720 discussions

by Tao Zhang

*** BLURB HERE *** Tao Zhang (2): coresight: Add support for device names dt-bindings: arm: add property for coresight component name Documentation/devicetree/bindings/arm/coresight.txt | 2 ++ drivers/hwtracing/coresight/coresight-core.c | 6 ++++++ 2 files changed, 8 insertions(+) -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project

5 years

[PATCH] coresight: add support to enable more coresight paths

by Tao Zhang

Current coresight implementation only supports enabling source ETMs or STM. This patch adds support to enable more kinds of coresight source to sink paths. We build a path from source to sink when any source is enabled and store it in a list. When the source is disabled, we fetch the corresponding path from the list and decrement the refcount on each device in the path. The device is disabled if the refcount reaches zero. Don't store path to coresight data structure of source to avoid unnecessary change to ABI. Since some targets may have coresight sources other than STM and ETMs, we need to add this change to support these coresight devices. Signed-off-by: Satyajit Desai <sadesai(a)codeaurora.org> Signed-off-by: Rama Aparna Mallavarapu <aparnam(a)codeaurora.org> Signed-off-by: Mulu He <muluhe(a)codeaurora.org> Signed-off-by: Tingwei Zhang <tingwei(a)codeaurora.org> Signed-off-by: Tao Zhang <taozha(a)codeaurora.org> --- drivers/hwtracing/coresight/coresight-core.c | 101 +++++++++++++++------------ 1 file changed, 56 insertions(+), 45 deletions(-) diff --git a/drivers/hwtracing/coresight/coresight-core.c b/drivers/hwtracing/coresight/coresight-core.c index 4ba801d..7dfadb6 100644 --- a/drivers/hwtracing/coresight/coresight-core.c +++ b/drivers/hwtracing/coresight/coresight-core.c @@ -35,18 +35,16 @@ struct coresight_node { }; /* - * When operating Coresight drivers from the sysFS interface, only a single - * path can exist from a tracer (associated to a CPU) to a sink. + * struct coresight_path - path from source to sink + * @path: Address of path list. + * @link: hook to the list. */ -static DEFINE_PER_CPU(struct list_head *, tracer_path); +struct coresight_path { + struct list_head *path; + struct list_head link; +}; -/* - * As of this writing only a single STM can be found in CS topologies. Since - * there is no way to know if we'll ever see more and what kind of - * configuration they will enact, for the time being only define a single path - * for STM. - */ -static struct list_head *stm_path; +static LIST_HEAD(cs_active_paths); /* * When losing synchronisation a new barrier packet needs to be inserted at the @@ -326,7 +324,7 @@ static void coresight_disable_sink(struct coresight_device *csdev) if (ret) return; coresight_control_assoc_ectdev(csdev, false); - csdev->enable = false; + csdev->activated = false; } static int coresight_enable_link(struct coresight_device *csdev, @@ -562,6 +560,20 @@ int coresight_enable_path(struct list_head *path, u32 mode, void *sink_data) goto out; } +static struct coresight_device *coresight_get_source(struct list_head *path) +{ + struct coresight_device *csdev; + + if (!path) + return NULL; + + csdev = list_first_entry(path, struct coresight_node, link)->csdev; + if (csdev->type != CORESIGHT_DEV_TYPE_SOURCE) + return NULL; + + return csdev; +} + struct coresight_device *coresight_get_sink(struct list_head *path) { struct coresight_device *csdev; @@ -1047,9 +1059,23 @@ static int coresight_validate_source(struct coresight_device *csdev, return 0; } +static int coresight_store_path(struct list_head *path) +{ + struct coresight_path *node; + + node = kzalloc(sizeof(struct coresight_path), GFP_KERNEL); + if (!node) + return -ENOMEM; + + node->path = path; + list_add(&node->link, &cs_active_paths); + + return 0; +} + int coresight_enable(struct coresight_device *csdev) { - int cpu, ret = 0; + int ret = 0; struct coresight_device *sink; struct list_head *path; enum coresight_dev_subtype_source subtype; @@ -1094,25 +1120,9 @@ int coresight_enable(struct coresight_device *csdev) if (ret) goto err_source; - switch (subtype) { - case CORESIGHT_DEV_SUBTYPE_SOURCE_PROC: - /* - * When working from sysFS it is important to keep track - * of the paths that were created so that they can be - * undone in 'coresight_disable()'. Since there can only - * be a single session per tracer (when working from sysFS) - * a per-cpu variable will do just fine. - */ - cpu = source_ops(csdev)->cpu_id(csdev); - per_cpu(tracer_path, cpu) = path; - break; - case CORESIGHT_DEV_SUBTYPE_SOURCE_SOFTWARE: - stm_path = path; - break; - default: - /* We can't be here */ - break; - } + ret = coresight_store_path(path); + if (ret) + goto err_source; out: mutex_unlock(&coresight_mutex); @@ -1129,8 +1139,11 @@ EXPORT_SYMBOL_GPL(coresight_enable); void coresight_disable(struct coresight_device *csdev) { - int cpu, ret; + int ret; struct list_head *path = NULL; + struct coresight_path *cspath = NULL; + struct coresight_path *cspath_next = NULL; + struct coresight_device *src_csdev = NULL; mutex_lock(&coresight_mutex); @@ -1141,20 +1154,18 @@ void coresight_disable(struct coresight_device *csdev) if (!csdev->enable || !coresight_disable_source(csdev)) goto out; - switch (csdev->subtype.source_subtype) { - case CORESIGHT_DEV_SUBTYPE_SOURCE_PROC: - cpu = source_ops(csdev)->cpu_id(csdev); - path = per_cpu(tracer_path, cpu); - per_cpu(tracer_path, cpu) = NULL; - break; - case CORESIGHT_DEV_SUBTYPE_SOURCE_SOFTWARE: - path = stm_path; - stm_path = NULL; - break; - default: - /* We can't be here */ - break; + list_for_each_entry_safe(cspath, cspath_next, &cs_active_paths, link) { + src_csdev = coresight_get_source(cspath->path); + if (!src_csdev) + continue; + if (src_csdev == csdev) { + path = cspath->path; + list_del(&cspath->link); + kfree(cspath); + } } + if (path == NULL) + goto out; coresight_disable_path(path); coresight_release_path(path); -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project

5 years

[PATCH 1/2] perf cs-etm: Refactor timestamp variable names

by James Clark

Remove ambiguity in variable names relating to timestamps. A later commit will save the sample kernel timestamp in one of the etm structs, so name all elements appropriately to avoid confusion. This is also removes some ambiguity arising from the fact that the --timestamp argument to perf record refers to sample kernel timestamps, and the /timestamp/ event modifier refers to etm timestamps, so the term is overloaded. Signed-off-by: James Clark <james.clark(a)arm.com> --- .../perf/util/cs-etm-decoder/cs-etm-decoder.c | 18 ++++---- tools/perf/util/cs-etm.c | 42 +++++++++---------- tools/perf/util/cs-etm.h | 4 +- 3 files changed, 31 insertions(+), 33 deletions(-) diff --git a/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c b/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c index 059bcec3f651..055cb93eca59 100644 --- a/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +++ b/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c @@ -276,13 +276,13 @@ cs_etm_decoder__do_soft_timestamp(struct cs_etm_queue *etmq, const uint8_t trace_chan_id) { /* No timestamp packet has been received, nothing to do */ - if (!packet_queue->timestamp) + if (!packet_queue->etm_timestamp) return OCSD_RESP_CONT; - packet_queue->timestamp = packet_queue->next_timestamp; + packet_queue->etm_timestamp = packet_queue->next_etm_timestamp; /* Estimate the timestamp for the next range packet */ - packet_queue->next_timestamp += packet_queue->instr_count; + packet_queue->next_etm_timestamp += packet_queue->instr_count; packet_queue->instr_count = 0; /* Tell the front end which traceid_queue needs attention */ @@ -308,8 +308,8 @@ cs_etm_decoder__do_hard_timestamp(struct cs_etm_queue *etmq, * Function do_soft_timestamp() will report the value to the front end, * hence asking the decoder to keep decoding rather than stopping. */ - if (packet_queue->timestamp) { - packet_queue->next_timestamp = elem->timestamp; + if (packet_queue->etm_timestamp) { + packet_queue->next_etm_timestamp = elem->timestamp; return OCSD_RESP_CONT; } @@ -320,8 +320,8 @@ cs_etm_decoder__do_hard_timestamp(struct cs_etm_queue *etmq, * which instructions started by subtracting the number of instructions * executed to the timestamp. */ - packet_queue->timestamp = elem->timestamp - packet_queue->instr_count; - packet_queue->next_timestamp = elem->timestamp; + packet_queue->etm_timestamp = elem->timestamp - packet_queue->instr_count; + packet_queue->next_etm_timestamp = elem->timestamp; packet_queue->instr_count = 0; /* Tell the front end which traceid_queue needs attention */ @@ -334,8 +334,8 @@ cs_etm_decoder__do_hard_timestamp(struct cs_etm_queue *etmq, static void cs_etm_decoder__reset_timestamp(struct cs_etm_packet_queue *packet_queue) { - packet_queue->timestamp = 0; - packet_queue->next_timestamp = 0; + packet_queue->etm_timestamp = 0; + packet_queue->next_etm_timestamp = 0; packet_queue->instr_count = 0; } diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c index 7e63e7dedc33..c25da2ffa8f3 100644 --- a/tools/perf/util/cs-etm.c +++ b/tools/perf/util/cs-etm.c @@ -38,8 +38,6 @@ #include <tools/libc_compat.h> #include "util/synthetic-events.h" -#define MAX_TIMESTAMP (~0ULL) - struct cs_etm_auxtrace { struct auxtrace auxtrace; struct auxtrace_queues queues; @@ -86,7 +84,7 @@ struct cs_etm_queue { struct cs_etm_decoder *decoder; struct auxtrace_buffer *buffer; unsigned int queue_nr; - u8 pending_timestamp; + u8 pending_timestamp_chan_id; u64 offset; const unsigned char *buf; size_t buf_len, buf_used; @@ -208,7 +206,7 @@ void cs_etm__etmq_set_traceid_queue_timestamp(struct cs_etm_queue *etmq, * be more than one channel per cs_etm_queue, we need to specify * what traceID queue needs servicing. */ - etmq->pending_timestamp = trace_chan_id; + etmq->pending_timestamp_chan_id = trace_chan_id; } static u64 cs_etm__etmq_get_timestamp(struct cs_etm_queue *etmq, @@ -216,22 +214,22 @@ static u64 cs_etm__etmq_get_timestamp(struct cs_etm_queue *etmq, { struct cs_etm_packet_queue *packet_queue; - if (!etmq->pending_timestamp) + if (!etmq->pending_timestamp_chan_id) return 0; if (trace_chan_id) - *trace_chan_id = etmq->pending_timestamp; + *trace_chan_id = etmq->pending_timestamp_chan_id; packet_queue = cs_etm__etmq_get_packet_queue(etmq, - etmq->pending_timestamp); + etmq->pending_timestamp_chan_id); if (!packet_queue) return 0; /* Acknowledge pending status */ - etmq->pending_timestamp = 0; + etmq->pending_timestamp_chan_id = 0; /* See function cs_etm_decoder__do_{hard|soft}_timestamp() */ - return packet_queue->timestamp; + return packet_queue->etm_timestamp; } static void cs_etm__clear_packet_queue(struct cs_etm_packet_queue *queue) @@ -814,7 +812,7 @@ static int cs_etm__setup_queue(struct cs_etm_auxtrace *etm, int ret = 0; unsigned int cs_queue_nr; u8 trace_chan_id; - u64 timestamp; + u64 etm_timestamp; struct cs_etm_queue *etmq = queue->priv; if (list_empty(&queue->head) || etmq) @@ -854,7 +852,7 @@ static int cs_etm__setup_queue(struct cs_etm_auxtrace *etm, /* * Run decoder on the trace block. The decoder will stop when - * encountering a timestamp, a full packet queue or the end of + * encountering an ETM timestamp, a full packet queue or the end of * trace for that block. */ ret = cs_etm__decode_data_block(etmq); @@ -865,10 +863,10 @@ static int cs_etm__setup_queue(struct cs_etm_auxtrace *etm, * Function cs_etm_decoder__do_{hard|soft}_timestamp() does all * the timestamp calculation for us. */ - timestamp = cs_etm__etmq_get_timestamp(etmq, &trace_chan_id); + etm_timestamp = cs_etm__etmq_get_timestamp(etmq, &trace_chan_id); /* We found a timestamp, no need to continue. */ - if (timestamp) + if (etm_timestamp) break; /* @@ -892,7 +890,7 @@ static int cs_etm__setup_queue(struct cs_etm_auxtrace *etm, * queue and will be processed in cs_etm__process_queues(). */ cs_queue_nr = TO_CS_QUEUE_NR(queue_nr, trace_chan_id); - ret = auxtrace_heap__add(&etm->heap, cs_queue_nr, timestamp); + ret = auxtrace_heap__add(&etm->heap, cs_queue_nr, etm_timestamp); out: return ret; } @@ -2221,7 +2219,7 @@ static int cs_etm__process_queues(struct cs_etm_auxtrace *etm) int ret = 0; unsigned int cs_queue_nr, queue_nr; u8 trace_chan_id; - u64 timestamp; + u64 etm_timestamp; struct auxtrace_queue *queue; struct cs_etm_queue *etmq; struct cs_etm_traceid_queue *tidq; @@ -2283,9 +2281,9 @@ static int cs_etm__process_queues(struct cs_etm_auxtrace *etm) if (ret) goto out; - timestamp = cs_etm__etmq_get_timestamp(etmq, &trace_chan_id); + etm_timestamp = cs_etm__etmq_get_timestamp(etmq, &trace_chan_id); - if (!timestamp) { + if (!etm_timestamp) { /* * Function cs_etm__decode_data_block() returns when * there is no more traces to decode in the current @@ -2308,7 +2306,7 @@ static int cs_etm__process_queues(struct cs_etm_auxtrace *etm) * this queue/traceID. */ cs_queue_nr = TO_CS_QUEUE_NR(queue_nr, trace_chan_id); - ret = auxtrace_heap__add(&etm->heap, cs_queue_nr, timestamp); + ret = auxtrace_heap__add(&etm->heap, cs_queue_nr, etm_timestamp); } out: @@ -2380,7 +2378,7 @@ static int cs_etm__process_event(struct perf_session *session, struct perf_tool *tool) { int err = 0; - u64 timestamp; + u64 sample_kernel_timestamp; struct cs_etm_auxtrace *etm = container_of(session->auxtrace, struct cs_etm_auxtrace, auxtrace); @@ -2394,11 +2392,11 @@ static int cs_etm__process_event(struct perf_session *session, } if (sample->time && (sample->time != (u64) -1)) - timestamp = sample->time; + sample_kernel_timestamp = sample->time; else - timestamp = 0; + sample_kernel_timestamp = 0; - if (timestamp || etm->timeless_decoding) { + if (sample_kernel_timestamp || etm->timeless_decoding) { err = cs_etm__update_queues(etm); if (err) return err; diff --git a/tools/perf/util/cs-etm.h b/tools/perf/util/cs-etm.h index 36428918411e..b300f6fa19cc 100644 --- a/tools/perf/util/cs-etm.h +++ b/tools/perf/util/cs-etm.h @@ -171,8 +171,8 @@ struct cs_etm_packet_queue { u32 head; u32 tail; u32 instr_count; - u64 timestamp; - u64 next_timestamp; + u64 etm_timestamp; + u64 next_etm_timestamp; struct cs_etm_packet packet_buffer[CS_ETM_PACKET_MAX_BUFFER]; }; -- 2.28.0

5 years

[PATCH v1 0/2] coresight: Add support for device names

by Tao Zhang

This series add support for coresight device name. In this way, nodes with specific names can be generated under sysfs, not just names with prefixes and index numbers. The coresight device can be quickly identified by the coresight names of sysfs nodes. This also allows using same names for CoreSight devices across different targets. This makes it easy to develop common scripts, which can be run across targets. Meanwhile, the script can use the same device name to control the same coresight device. This series patches base on coresight-next repo http://git.linaro.org/kernel/coresight.git/log/?h=next Tao Zhang (2): coresight: Add support for device names dt-bindings: arm: add property for coresight component name Documentation/devicetree/bindings/arm/coresight.txt | 2 ++ drivers/hwtracing/coresight/coresight-core.c | 6 ++++++ 2 files changed, 8 insertions(+) -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project

5 years

[PATCH] coresight: etm-perf: Fix define build issue when built as module

by Mike Leach

CONFIG_CORESIGHT_SOURCE_ETM4X is undefined when built as module, CONFIG_CORESIGHT_SOURCE_ETM4X_MODULE is defined instead. Therefore code in format_attr_contextid_show() not correctly complied when coresight built as module. Use IS_ENABLED(CONFIG_CORESIGHT_SOURCE_ETM4X) to correct this. Fixes: 88f11864cf1d ("coresight: etm-perf: Support PID tracing for kernel at EL2") Signed-off-by: Mike Leach <mike.leach(a)linaro.org> --- drivers/hwtracing/coresight/coresight-etm-perf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c index 560baefdfed8..b2d6db78a025 100644 --- a/drivers/hwtracing/coresight/coresight-etm-perf.c +++ b/drivers/hwtracing/coresight/coresight-etm-perf.c @@ -78,7 +78,7 @@ static ssize_t format_attr_contextid_show(struct device *dev, { int pid_fmt = ETM_OPT_CTXTID; -#if defined(CONFIG_CORESIGHT_SOURCE_ETM4X) +#if IS_ENABLED(CONFIG_CORESIGHT_SOURCE_ETM4X) pid_fmt = is_kernel_in_hyp_mode() ? ETM_OPT_CTXTID2 : ETM_OPT_CTXTID; #endif return sprintf(page, "config:%d\n", pid_fmt); -- 2.17.1

5 years

[GIT PULL] coresight: Fixes for ETE and TRBE

by Mathieu Poirier

The following changes since commit 4fb13790417a7bf726f3867a5d2b9723efde488b: dts: bindings: Document device tree bindings for Arm TRBE (2021-04-06 16:05:38 -0600) are available in the Git repository at: git@gitolite.kernel.org:pub/scm/linux/kernel/git/coresight/linux.git next-ETE-TRBE for you to fetch changes up to 68d400c079978f649e7f63aba966d219743edd64: coresight: trbe: Fix return value check in arm_trbe_register_coresight_cpu() (2021-04-13 09:46:27 -0600) ---------------------------------------------------------------- Hi Marc, Please consider these two patches, they are ETE/TRBE fixes found by bots. Let me know if you want me to rebase on your next branch and send the pull request from that. Thanks, Mathieu ---------------------------------------------------------------- Wei Yongjun (2): coresight: core: Make symbol 'csdev_sink' static coresight: trbe: Fix return value check in arm_trbe_register_coresight_cpu() drivers/hwtracing/coresight/coresight-core.c | 2 +- drivers/hwtracing/coresight/coresight-trbe.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)

5 years

[PATCH -next v2] coresight: trbe: Fix return value check in arm_trbe_register_coresight_cpu()

by Wei Yongjun

In case of error, the function devm_kasprintf() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Reported-by: Hulk Robot <hulkci(a)huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1(a)huawei.com> --- v1 -> v2: remove fixes tag. --- drivers/hwtracing/coresight/coresight-trbe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwtracing/coresight/coresight-trbe.c b/drivers/hwtracing/coresight/coresight-trbe.c index 5ce239875c98..176868496879 100644 --- a/drivers/hwtracing/coresight/coresight-trbe.c +++ b/drivers/hwtracing/coresight/coresight-trbe.c @@ -871,7 +871,7 @@ static void arm_trbe_register_coresight_cpu(struct trbe_drvdata *drvdata, int cp dev = &cpudata->drvdata->pdev->dev; desc.name = devm_kasprintf(dev, GFP_KERNEL, "trbe%d", cpu); - if (IS_ERR(desc.name)) + if (!desc.name) goto cpu_clear; desc.type = CORESIGHT_DEV_TYPE_SINK;

5 years

Audio Transcription Service Provider

by Maria Taylor

Hello, Do you need someone reliable to transcribe both your short term and long term projects? Or do you need an accurate transcript for your audio or video? Allow us to transcribe your audio and provide you accurate transcripts and let us help you reach your business/project goals through the help of our transcription services. What are our goals with each transcript? Speed Accuracy Confidentiality Each transcript is properly formatted. Strict grammar and punctuation rules are adhered to and of course, file security is something we take very seriously. Have any transcription queries? Send me a message. Let's discuss what you need to get done. We will address any concerns you have. - Professional transcription - Accurate and thorough - Beautifully transcribed documents. - Grammar, spelling and jargon thoroughly checked We have transcribed within most industries: Medical transcription Technological Academic Lectures Business Groups Legal Research interviews more... Skilled with international accents and prompt response. Our pricing is better or comparable to individual service provider. In addition we also assist in APA Style formatting for research papers. Please note we don’t conduct research but assist only in formatting of the papers. You can contact us by replying to this email or directly writing back to us on info(a)cuttingedgedesigns.info or through our website www.cuttingedgedesigns.info contact us form as well. Regards, Maria Taylor www.cuttingedgedesigns.info http://cuttingedgedesigns.info/mailsoft/unsubscribe.php?M=2735228&C=b2eeca6…

5 years

[PATCH v6 00/10] CoreSight configuration management; ETM strobing

by Mike Leach

This patchset introduces initial concepts in CoreSight system configuration management support. to allow more detailed and complex programming to be applied to CoreSight systems during trace capture. Configurations consist of 2 elements:- 1) Features - programming combinations for devices, applied to a class of device on the system (all ETMv4), or individual devices. 2) Configurations - a set of programmed features used when the named configuration is selected. Features and configurations are declared as a data table, a set of register, resource and parameter requirements. Features and configurations are loaded into the system by the virtual cs_syscfg device. This then matches features to any registered devices and loads the feature into them. Individual device classes that support feature and configuration register with cs_syscfg. Once loaded a configuration can be enabled for a specific trace run. Configurations are registered with the perf cs_etm event as entries in cs_etm/events. These can be selected on the perf command line as follows:- perf record -e cs_etm/<config_name>/ ... This patch set has one pre-loaded configuration and feature. A named "strobing" feature is provided for ETMv4. A named "autofdo" configuration is provided. This configuration enables strobing on any ETM in used. Thus the command: perf record -e cs_etm/autofdo/ ... will trace the supplied application while enabling the "autofdo" configuation on each ETM as it is enabled by perf. This in turn will enable strobing for the ETM - with default parameters. Parameters can be adjusted using configfs. The sink used in the trace run will be automatically selected. A configuration can supply up to 15 of preset parameter values, which will subsitute in parameter values for any feature used in the configuration. Selection of preset values as follows perf record -e cs_etm/autofdo,preset=1/ ... (valid presets 1-N, where N is the number supplied in the configuration, not exceeding 15. preset=0 is the same as not selecting a preset.) Applies to & tested against coresight/next-ETE-TRBE (5.12-rc3 base) Changes since v5: 1) Fix code style issues from auto-build reports, as Reported-by: kernel test robot <lkp(a)intel.com> 2) Update comments to get consistent docs for API functions. 3) remove unused #define from autofdo example. 4) fix perf code style issues from patch 4 (Mathieu) 5) fix configfs code style issues from patch 9. (Mathieu) Changes since v4: (based on comments from Matthieu and Suzuki). No large functional changes - primarily code improvements and naming schema. 1) Updated entire set to ensure a consistent naming scheme was used for variables and struct members that refer to the key objects in the system. Suffixes _desc used for all references to feature and configuraion descriptors, suffix _csdev used for all references to load feature and configs in the csdev instances. (Mathieu & Suzuki). 2) Dropped the 'configurations' sub dir in cs_etm perf directories as superfluous with the configfs containing the same information. (Mathieu). 3) Simplified perf handling code (suzuki) 4) Multiple simplifications and improvements for code readability (Matthieu and Suzuki) Changes since v3: (Primarily based on comments from Matthieu) 1) Locking mechanisms simplified. 2) Removed the possibility to enable features independently from configurations.Only configurations can be enabled now. Simplifies programming logic. 3) Configuration now uses an activate->enable mechanism. This means that perf will activate a selected configuration at the start of a session (during setup_aux), and disable at the end of a session (around free_aux) The active configuration and associated features will be programmed into the CoreSight device instances when they are enabled. This locks the configuration into the system while in use. Parameters cannot be altered while this is in place. This mechanism will be extended in future for dynamic load / unload of configurations to prevent removal while in use. 4) Removed the custom bus / driver as un-necessary. A single device is registered to own perf fs elements and configfs. 5) Various other minor issues addressed. Changes since v2: 1) Added documentation file. 2) Altered cs_syscfg driver to no longer be coresight_device based, and moved to its own custom bus to remove it from the main coresight bus. (Mathieu) 3) Added configfs support to inspect and control loaded configurations and features. Allows listing of preset values (Yabin Cui) 4) Dropped sysfs support for adjusting feature parameters on the per device basis, in favour of a single point adjustment in configfs that is pushed to all device instances. 5) Altered how the config and preset command line options are handled in perf and the drivers. (Mathieu and Suzuki). 6) Fixes for various issues and technical points (Mathieu, Yabin) Changes since v1: 1) Moved preloaded configurations and features out of individual drivers. 2) Added cs_syscfg driver to manage configurations and features. Individual drivers register with cs_syscfg indicating support for config, and provide matching information that the system uses to load features into the drivers. This allows individual drivers to be updated on an as needed basis - and removes the need to consider devices that cannot benefit from configuration - static replicators, funnels, tpiu. 3) Added perf selection of configuarations. 4) Rebased onto the coresight module loading set. To follow in future revisions / sets:- a) load of additional config and features by loadable module. b) load of additional config and features by configfs c) enhanced resource management for ETMv4 and checking features have sufficient resources to be enabled. d) ECT and CTI support for configuration and features. Mike Leach (10): coresight: syscfg: Initial coresight system configuration coresight: syscfg: Add registration and feature loading for cs devices coresight: config: Add configuration and feature generic functions coresight: etm-perf: update to handle configuration selection coresight: syscfg: Add API to activate and enable configurations coresight: etm-perf: Update to activate selected configuration coresight: etm4x: Add complex configuration handlers to etmv4 coresight: config: Add preloaded configurations coresight: syscfg: Add initial configfs support Documentation: coresight: Add documentation for CoreSight config .../trace/coresight/coresight-config.rst | 244 ++++++ Documentation/trace/coresight/coresight.rst | 16 + drivers/hwtracing/coresight/Makefile | 7 +- .../hwtracing/coresight/coresight-cfg-afdo.c | 147 ++++ .../coresight/coresight-cfg-preload.c | 27 + .../coresight/coresight-cfg-preload.h | 11 + .../hwtracing/coresight/coresight-config.c | 275 ++++++ .../hwtracing/coresight/coresight-config.h | 253 ++++++ drivers/hwtracing/coresight/coresight-core.c | 12 +- .../hwtracing/coresight/coresight-etm-perf.c | 150 +++- .../hwtracing/coresight/coresight-etm-perf.h | 12 +- .../hwtracing/coresight/coresight-etm4x-cfg.c | 182 ++++ .../hwtracing/coresight/coresight-etm4x-cfg.h | 30 + .../coresight/coresight-etm4x-core.c | 38 +- .../coresight/coresight-etm4x-sysfs.c | 3 + .../coresight/coresight-syscfg-configfs.c | 396 +++++++++ .../coresight/coresight-syscfg-configfs.h | 45 + .../hwtracing/coresight/coresight-syscfg.c | 804 ++++++++++++++++++ .../hwtracing/coresight/coresight-syscfg.h | 81 ++ include/linux/coresight.h | 7 + 20 files changed, 2704 insertions(+), 36 deletions(-) create mode 100644 Documentation/trace/coresight/coresight-config.rst create mode 100644 drivers/hwtracing/coresight/coresight-cfg-afdo.c create mode 100644 drivers/hwtracing/coresight/coresight-cfg-preload.c create mode 100644 drivers/hwtracing/coresight/coresight-cfg-preload.h create mode 100644 drivers/hwtracing/coresight/coresight-config.c create mode 100644 drivers/hwtracing/coresight/coresight-config.h create mode 100644 drivers/hwtracing/coresight/coresight-etm4x-cfg.c create mode 100644 drivers/hwtracing/coresight/coresight-etm4x-cfg.h create mode 100644 drivers/hwtracing/coresight/coresight-syscfg-configfs.c create mode 100644 drivers/hwtracing/coresight/coresight-syscfg-configfs.h create mode 100644 drivers/hwtracing/coresight/coresight-syscfg.c create mode 100644 drivers/hwtracing/coresight/coresight-syscfg.h -- 2.17.1

5 years

Help sought on which approach to take for tracing with CoreSight

by Dominik Huber

Hello, I want to gather trace data of closed source binaries using CoreSight ETMv4 on a Hikey620. I want to know the source and destination address for all taken jumps of the traced program, like in the output of "perf script". It would be great if I could get feedback on how to achieve this. I'm not sure where to turn to with such a broad CoreSight problem, so I'm sorry if you are not the right ones to turn to, but I'd be happy for any help or advice you might have. My main problem is, that I don't know which approaches are promising to try. Below I describe two Ideas that I tried but where I got stuck after a while. Are they any good for my use case? If yes, then how can I solve the respective problems that have come up, or where can I look to solve them? If not, are there maybe better ways to approach this, which I've overlooked until now? After hearing a presentation from Mathieu Poirier, I thought sysFS was the (only) way to go. However, the decoded trace seems to show only the jump address, instead of both the source and destination addresses, and I did not find a register to change that. Also, the trace gathered seems to lose some of the branch addresses. Inserting a sleep instruction after each regular instruction into my test program, fixed that. But since it should also work for closed source binaries and has to be fast this is probably not an option. Then I tried to copy the way "perf record" is tracing, and extract the relevant code parts. But then I realized, that perf record doesn't use sysFS, apart from enabling the sink in "util/cs-etm.c" (which apparently is not used, and not even deactivated afterward). So there is another way to gather trace, maybe by interacting with the CoreSight driver directly. But looking into the "perf report" source code I couldn't find it yet. Thanks and regards, Dominik

5 years

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

CoreSight