Hi Mike & Suzuki,
On 2/9/2023 10:56 PM, Mike Leach wrote:
Hi,
On Thu, 9 Feb 2023 at 03:02, Jinlong Mao quic_jinlmao@quicinc.com wrote:
On 2/9/2023 12:36 AM, Suzuki K Poulose wrote:
On 08/02/2023 16:20, Mike Leach wrote:
Quick correction - you need to look for enable_source / enable_sink files and disable those that are currently '1'
Mike
On Wed, 8 Feb 2023 at 16:16, Mike Leach mike.leach@linaro.org wrote:
Hi
As this is a sysfs only update - would it not be easier to simply use a shell script to iterate through coresight/devices/ looking for disable_source / disable_sink files and setting those accordingly?
See tools/perf/tests/shell/test_arm_coresight.sh for an example of a script that does similar iteration to test coresight in perf
+1
Suzuki
Hi Mike & Suzuki,
Sometimes user just want to have some quick test from PC with adb commands. It is very easy to reset all sources and sinks' status by command below. echo 1 > /sys/bus/coresight/reset_source_sink
Users of coresight via sysfs will have to know how to use the coresight infrastructure in order to enable the sources and sinks in the first place - e.g echo 1 > /sys/bus/coresight/devices/tmc_etr0/enable_sink echo 1 > /sys/bus/coresight/devices/etm0/enable_source
Given that they are aware of which sources and sinks they enabled - disabling them should be simple.
Preparing the script for test is not easy for users who are not familiar with the coresight framework.
If there is a genuine use case were a user has opened so many sources on the command line that they need a simpler way of closing them than repeating the enabled commands with an echo 0 > ... then any script could be shipped as part of kernel/tools/coresight or kernel/samples/coresight - they would not have to write it themselves, and just run it from the command line - for example :- ./kernel/tools/coresight/scripts/sysfs_disable_sources_and_sinks.sh
Realistically users will only try out a couple of devices as the usefulness of the sysfs interface is really limited to testing or board bring up. Any complex use with sysfs - as in the coresight tests I mentioned earlier is really going to be done by scripting.
Regards
Mike
There is also requirement that reset all the sources and sinks in an user space daemon. For such requirement, I think it is better to use only once sysfs node instead of iterating through coresight/device folder in an user space daemon.
Thanks Jinlong Mao
Thanks Jinlong Mao