Hi,
On 8/18/20 2:29 PM, Suzuki K Poulose wrote:
If the specified/hinted sink is not reachable from a subset of the CPUs, we could end up unable to trace the event on those CPUs. This is the best effort we could do until we support 1:1 configurations. Fail gracefully in such cases avoiding a WARN_ON, which can be easily triggered by the user on certain platforms, like :
I've tested it on 5.8 with "coresight: fix offset by one error in counting ports" on the N1SDP and i'm getting traces, and not seeing any further WARN's.
Thanks for looking into this!
Tested-by: Jeremy Linton jeremy.linton@arm.com
[10919.513250] ------------[ cut here ]------------ [10919.517861] WARNING: CPU: 2 PID: 24021 at drivers/hwtracing/coresight/coresight-etm-perf.c:316 etm_event_start+0xf8/0x100 ...
[10919.564403] CPU: 2 PID: 24021 Comm: perf Not tainted 5.8.0+ #24 [10919.570308] pstate: 80400089 (Nzcv daIf +PAN -UAO BTYPE=--) [10919.575865] pc : etm_event_start+0xf8/0x100 [10919.580034] lr : etm_event_start+0x80/0x100 [10919.584202] sp : fffffe001932f940 [10919.587502] x29: fffffe001932f940 x28: fffffc834995f800 [10919.592799] x27: 0000000000000000 x26: fffffe0011f3ced0 [10919.598095] x25: fffffc837fce244c x24: fffffc837fce2448 [10919.603391] x23: 0000000000000002 x22: fffffc8353529c00 [10919.608688] x21: fffffc835bb31000 x20: 0000000000000000 [10919.613984] x19: fffffc837fcdcc70 x18: 0000000000000000 [10919.619281] x17: 0000000000000000 x16: 0000000000000000 [10919.624577] x15: 0000000000000000 x14: 00000000000009f8 [10919.629874] x13: 00000000000009f8 x12: 0000000000000018 [10919.635170] x11: 0000000000000000 x10: 0000000000000000 [10919.640467] x9 : fffffe00108cd168 x8 : 0000000000000000 [10919.645763] x7 : 0000000000000020 x6 : 0000000000000001 [10919.651059] x5 : 0000000000000002 x4 : 0000000000000001 [10919.656356] x3 : 0000000000000000 x2 : 0000000000000000 [10919.661652] x1 : fffffe836eb40000 x0 : 0000000000000000 [10919.666949] Call trace: [10919.669382] etm_event_start+0xf8/0x100 [10919.673203] etm_event_add+0x40/0x60 [10919.676765] event_sched_in.isra.134+0xcc/0x210 [10919.681281] merge_sched_in+0xb0/0x2a8 [10919.685017] visit_groups_merge.constprop.140+0x15c/0x4b8 [10919.690400] ctx_sched_in+0x15c/0x170 [10919.694048] perf_event_sched_in+0x6c/0xa0 [10919.698130] ctx_resched+0x60/0xa0 [10919.701517] perf_event_exec+0x288/0x2f0 [10919.705425] begin_new_exec+0x4c8/0xf58 [10919.709247] load_elf_binary+0x66c/0xf30 [10919.713155] exec_binprm+0x15c/0x450 [10919.716716] __do_execve_file+0x508/0x748 [10919.720711] __arm64_sys_execve+0x40/0x50 [10919.724707] do_el0_svc+0xf4/0x1b8 [10919.728095] el0_sync_handler+0xf8/0x124 [10919.732003] el0_sync+0x140/0x180
Fixes: f9d81a657bb8 ("coresight: perf: Allow tracing on hotplugged CPUs") Reported-by: Jeremy Linton jeremy.linton@arm.com Cc: Mathieu Poirier mathieu.poirier@linaro.org Cc: Mike Leach mike.leach@linaro.org Signed-off-by: Suzuki K Poulose suzuki.poulose@arm.com
drivers/hwtracing/coresight/coresight-etm-perf.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c index 1a3169e69bb1..9d61a71da96f 100644 --- a/drivers/hwtracing/coresight/coresight-etm-perf.c +++ b/drivers/hwtracing/coresight/coresight-etm-perf.c @@ -321,6 +321,16 @@ static void etm_event_start(struct perf_event *event, int flags) if (!event_data) goto fail;
- /*
* Check if this ETM is allowed to trace, as decided* at etm_setup_aux(). This could be due to an unreachable* sink from this ETM. We can't do much in this case if* the sink was specified or hinted to the driver. For* now, simply don't record anything on this ETM.*/- if (!cpumask_test_cpu(cpu, &event_data->mask))
goto fail_end_stop;- path = etm_event_cpu_path(event_data, cpu); /* We need a sink, no need to continue without one */ sink = coresight_get_sink(path);