Adds new coresight-cti.yaml file describing the bindings required to define CTI in the device trees.

Adds an include file to dt-bindings/arm to define constants describing common signal functionality used in CoreSight and generic usage.

Signed-off-by: Mike Leach mike.leach@linaro.org Reviewed-by: Mathieu Poirier mathieu.poirier@linaro.org --- .../bindings/arm/coresight-cti.yaml | 303 ++++++++++++++++++ .../devicetree/bindings/arm/coresight.txt | 7 + MAINTAINERS | 2 + include/dt-bindings/arm/coresight-cti-dt.h | 37 +++ 4 files changed, 349 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/coresight-cti.yaml create mode 100644 include/dt-bindings/arm/coresight-cti-dt.h

diff --git a/Documentation/devicetree/bindings/arm/coresight-cti.yaml b/Documentation/devicetree/bindings/arm/coresight-cti.yaml new file mode 100644 index 000000000000..cbbe88fa7148 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/coresight-cti.yaml @@ -0,0 +1,303 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# Copyright 2019 Linaro Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/coresight-cti.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Coresight Cross Trigger Interface (CTI) device. + +description: | + The CoreSight Embedded Cross Trigger (ECT) consists of CTI devices connected + to one or more CoreSight components and/or a CPU, with CTIs interconnected in + a star topology via the Cross Trigger Matrix (CTM), which is not programmable. + The ECT components are not part of the trace generation data path and are thus + not part of the CoreSight graph described in the general CoreSight bindings + file coresight.txt. + + The CTI component properties define the connections between the individual + CTI and the components it is directly connected to, consisting of input and + output hardware trigger signals. CTIs can have a maximum number of input and + output hardware trigger signals (8 each for v1 CTI, 32 each for v2 CTI). The + number is defined at design time, the maximum of each defined in the DEVID + register. + + CTIs are interconnected in a star topology via the CTM, using a number of + programmable channels, usually 4, but again implementation defined and + described in the DEVID register. The star topology is not required to be + described in the bindings as the actual connections are software + programmable. + + In general the connections between CTI and components via the trigger signals + are implementation defined, except when the CTI is connected to an ARM v8 + architecture core and optional ETM. + + In this case the ARM v8 architecture defines the required signal connections + between CTI and the CPU core and ETM if present. In the case of a v8 + architecturally connected CTI an additional compatible string is used to + indicate this feature (arm,coresight-cti-v8-arch). + + When CTI trigger connection information is unavailable then a minimal driver + binding can be declared with no explicit trigger signals. This will result + the driver detecting the maximum available triggers and channels from the + DEVID register and make them all available for use as a single default + connection. Any user / client application will require additional information + on the connections between the CTI and other components for correct operation. + This information might be found by enabling the Integration Test registers in + the driver (set CONFIG_CORESIGHT_CTI_INTEGRATION_TEST in Kernel + configuration). These registers may be used to explore the trigger connections + between CTI and other CoreSight components. + + Certain triggers between CoreSight devices and the CTI have specific types + and usages. These can be defined along with the signal indexes with the + constants defined in <dt-bindings/arm/coresight-cti-dt.h> + + For example a CTI connected to a core will usually have a DBGREQ signal. This + is defined in the binding as type PE_EDBGREQ. These types will appear in an + optional array alongside the signal indexes. Omitting types will default all + signals to GEN_IO. + + Note that some hardware trigger signals can be connected to non-CoreSight + components (e.g. UART etc) depending on hardware implementation. + +maintainers: + - Mike Leach mike.leach@linaro.org + +allOf: + - $ref: /schemas/arm/primecell.yaml# + +# Need a custom select here or 'arm,primecell' will match on lots of nodes +select: + properties: + compatible: + contains: + enum: + - arm,coresight-cti + required: + - compatible + +properties: + $nodename: + pattern: "^cti(@[0-9a-f]+)$" + compatible: + oneOf: + - items: + - const: arm,coresight-cti + - const: arm,primecell + - items: + - const: arm,coresight-cti-v8-arch + - const: arm,coresight-cti + - const: arm,primecell + + reg: + maxItems: 1 + + cpu: + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle + description: Handle to cpu this device is associated with. + + arm,cti-ctm-id: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + description: + Defines the CTM this CTI is connected to, in large systems with multiple + separate CTI/CTM nets. Typically multi-socket systems where the CTM is + propagated between sockets. + + arm,cs-dev-assoc: + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle + description: + defines a phandle reference to an associated CoreSight trace device. + When the associated trace device is enabled, then the respective CTI + will be enabled. Use in a trig-conns node, or in CTI base node when + arm,cti-v8-arch present. If the associated device has not been registered + then the node name will be stored as the connection name for later + resolution. If the associated device is not a CoreSight device or not + registered then the node name will remain the connection name and + automatic enabling will not occur. + +patternProperties: + '^trig_conns@([0-9]+)$': + type: object + description: + A trigger connections child node which describes the trigger signals + between this CTI and another hardware device. This device may be a CPU, + CoreSight device, any other hardware device or simple external IO lines. + The connection may have both input and output triggers, or only one or the + other. + + properties: + + arm,trig-in-sigs: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: + List of CTI trigger in signal numbers in use by a trig-conns node. + + arm,trig-in-types: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: + List of constants representing the types for the CTI trigger in + signals. Types in this array match to the corresponding signal in the + arm,trig-in-sigs array. If the -types array is smaller, or omitted + completely, then the types will default to GEN_IO. + + arm,trig-out-sigs: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: + List of CTI trigger out signal numbers in use by a trig-conns node. + + arm,trig-out-types: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: + List of constants representing the types for the CTI trigger out + signals. Types in this array match to the corresponding signal + in the arm,trig-out-sigs array. If the "-types" array is smaller, + or omitted completely, then the types will default to GEN_IO. + + arm,trig-filters: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: + List of CTI trigger out signals that will be blocked from becoming + active, unless filtering is disabled on the driver. + + arm,trig-conn-name: + allOf: + - $ref: /schemas/types.yaml#/definitions/string + description: + Defines a connection name that will be displayed, if the cpu or + arm,cs-dev-assoc properties are not being used in this connection. + Principle use for CTI that are connected to non-CoreSight devices, or + external IO. + + anyOf: + - required: + - arm,trig-in-sigs + - required: + - arm,trig-out-sigs + oneOf: + - required: + - arm,trig-conn-name + - required: + - cpu + - required: + - arm,cs-dev-assoc + +required: + - compatible + - reg + - clocks + - clock-names + +examples: + # minimum CTI definition. DEVID register used to set number of triggers. + - | + cti@20020000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x20020000 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + }; + # v8 architecturally defined CTI - CPU + ETM connections generated by the + # driver according to the v8 architecture specification. + - | + cti@859000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0x859000 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + + cpu = <&CPU1>; + arm,cs-dev-assoc = <&etm1>; + }; + # Implementation defined CTI - CPU + ETM connections explicitly defined.. + # Shows use of type constants from dt-bindings/arm/coresight-cti-dt.h + - | + #include <dt-bindings/arm/coresight-cti-dt.h> + + cti@858000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x858000 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + + arm,cti-ctm-id = <1>; + + trig-conns@0 { + arm,trig-in-sigs = <4 5 6 7>; + arm,trig-in-types = <ETM_EXTOUT + ETM_EXTOUT + ETM_EXTOUT + ETM_EXTOUT>; + arm,trig-out-sigs = <4 5 6 7>; + arm,trig-out-types = <ETM_EXTIN + ETM_EXTIN + ETM_EXTIN + ETM_EXTIN>; + arm,cs-dev-assoc = <&etm0>; + }; + + trig-conns@1 { + cpu = <&CPU0>; + arm,trig-in-sigs = <0 1>; + arm,trig-in-types = <PE_DBGTRIGGER + PE_PMUIRQ>; + arm,trig-out-sigs=<0 1 2 >; + arm,trig-out-types = <PE_EDBGREQ + PE_DBGRESTART + PE_CTIIRQ>; + + arm,trig-filters = <0>; + }; + }; + # Implementation defined CTI - non CoreSight component connections. + - | + cti@20110000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0 0x20110000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + + trig-conns@0 { + arm,trig-in-sigs=<0>; + arm,trig-in-types=<GEN_INTREQ>; + arm,trig-out-sigs=<0>; + arm,trig-out-types=<GEN_HALTREQ>; + arm,trig-conn-name = "sys_profiler"; + }; + + trig-conns@1 { + arm,trig-out-sigs=<2 3>; + arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>; + arm,trig-conn-name = "watchdog"; + }; + + trig-conns@2 { + arm,trig-in-sigs=<1 6>; + arm,trig-in-types=<GEN_HALTREQ GEN_RESTARTREQ>; + arm,trig-conn-name = "g_counter"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt index d02c42d21f2f..846f6daae71b 100644 --- a/Documentation/devicetree/bindings/arm/coresight.txt +++ b/Documentation/devicetree/bindings/arm/coresight.txt @@ -45,6 +45,10 @@ its hardware characteristcs. - Coresight Address Translation Unit (CATU) "arm,coresight-catu", "arm,primecell";

+ - Coresight Cross Trigger Interface (CTI): + "arm,coresight-cti", "arm,primecell"; + See coresight-cti.yaml for full CTI definitions. + * reg: physical base address and length of the register set(s) of the component.

@@ -72,6 +76,9 @@ its hardware characteristcs. * reg-names: the only acceptable values are "stm-base" and "stm-stimulus-base", each corresponding to the areas defined in "reg".

+* Required properties for Coresight Cross Trigger Interface (CTI) + See coresight-cti.yaml for full CTI definitions. + * Required properties for devices that don't show up on the AMBA bus, such as non-configurable replicators and non-configurable funnels:

diff --git a/MAINTAINERS b/MAINTAINERS index bd5847e802de..77f5d28fa84b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1645,9 +1645,11 @@ R: Suzuki K Poulose suzuki.poulose@arm.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: drivers/hwtracing/coresight/* +F: include/dt-bindings/arm/coresight-cti-dt.h F: Documentation/trace/coresight/* F: Documentation/devicetree/bindings/arm/coresight.txt F: Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt +F: Documentation/devicetree/bindings/arm/coresight-cti.yaml F: Documentation/ABI/testing/sysfs-bus-coresight-devices-* F: tools/perf/arch/arm/util/pmu.c F: tools/perf/arch/arm/util/auxtrace.c diff --git a/include/dt-bindings/arm/coresight-cti-dt.h b/include/dt-bindings/arm/coresight-cti-dt.h new file mode 100644 index 000000000000..61e7bdf8ea6e --- /dev/null +++ b/include/dt-bindings/arm/coresight-cti-dt.h @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * This header provides constants for the defined trigger signal + * types on CoreSight CTI. + */ + +#ifndef _DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H +#define _DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H + +#define GEN_IO 0 +#define GEN_INTREQ 1 +#define GEN_INTACK 2 +#define GEN_HALTREQ 3 +#define GEN_RESTARTREQ 4 +#define PE_EDBGREQ 5 +#define PE_DBGRESTART 6 +#define PE_CTIIRQ 7 +#define PE_PMUIRQ 8 +#define PE_DBGTRIGGER 9 +#define ETM_EXTOUT 10 +#define ETM_EXTIN 11 +#define SNK_FULL 12 +#define SNK_ACQCOMP 13 +#define SNK_FLUSHCOMP 14 +#define SNK_FLUSHIN 15 +#define SNK_TRIGIN 16 +#define STM_ASYNCOUT 17 +#define STM_TOUT_SPTE 18 +#define STM_TOUT_SW 19 +#define STM_TOUT_HETE 20 +#define STM_HWEVENT 21 +#define ELA_TSTART 22 +#define ELA_TSTOP 23 +#define ELA_DBGREQ 24 +#define CTI_TRIG_MAX 25 + +#endif /*_DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H */