[PATCH v2 00/11] coresight: etm4x: Fixes and updates for sysfs API

List overview All Threads
Download

newer

older

[PATCH v1 0/4] perf cs-etm: Fix...

[PATCH v3 0/6] perf cs-etm:...

Mike Leach

29 Aug 2019 29 Aug '19

9:33 p.m.

Review of ETMV4 sysfs code resulted in a number of minor issues being discovered.

Patch set fixes these issues:- 1) Update for ETM v4.4 archtecture. 2) Add missing single shot comparator API. 3) Misc fixes and improvements to sysfs API 4) Updated programmers documentation and reference.

Changes since v1 (from reviews by Mathieu and Leo):- Usability patch split into 2 separate functional patches. Docs patch split into 3 patches. Misc style and comment typo fixes.

Mike Leach (11): coresight: etm4x: Fixes for ETM v4.4 architecture updates. coresight: etm4x: Fix input validation for sysfs. coresight: etm4x: Add missing API to set EL match on address filters coresight: etm4x: Fix issues with start-stop logic. coresight: etm4x: Improve usability of sysfs - include/exclude addr. coresight: etm4x: Improve usability of sysfs - CID and VMID masks. coresight: etm4x: Add view comparator settings API to sysfs. coresight: etm4x: Add missing single-shot control API to sysfs coresight: etm4x: docs: Update ABI doc for sysfs features added. coresight: docs: Create common sub-directory for coresight trace. coresight: etm4x: docs: Adds detailed document for programming etm4x.

.../testing/sysfs-bus-coresight-devices-etm4x | 183 ++++--- .../{ => coresight}/coresight-cpu-debug.txt | 0 .../coresight/coresight-etm4x-reference.txt | 458 ++++++++++++++++++ .../trace/{ => coresight}/coresight.txt | 0 MAINTAINERS | 3 +- .../coresight/coresight-etm4x-sysfs.c | 312 +++++++++++- drivers/hwtracing/coresight/coresight-etm4x.c | 32 +- drivers/hwtracing/coresight/coresight-etm4x.h | 18 +- 8 files changed, 905 insertions(+), 101 deletions(-) rename Documentation/trace/{ => coresight}/coresight-cpu-debug.txt (100%) create mode 100644 Documentation/trace/coresight/coresight-etm4x-reference.txt rename Documentation/trace/{ => coresight}/coresight.txt (100%)

-- 2.17.1

Show replies by date

Mike Leach

29 Aug 29 Aug

9:33 p.m.

New subject: [PATCH v2 01/11] coresight: etm4x: Fixes for ETM v4.4 architecture updates.

ETMv4.4 adds in support for tracing secure EL2 (per arch 8.x updates). Patch accounts for this new capability.

Reviewed-by: Leo Yan leo.yan@linaro.org Signed-off-by: Mike Leach mike.leach@linaro.org --- .../hwtracing/coresight/coresight-etm4x-sysfs.c | 12 ++++++------ drivers/hwtracing/coresight/coresight-etm4x.c | 5 ++++- drivers/hwtracing/coresight/coresight-etm4x.h | 15 +++++++++++---- 3 files changed, 21 insertions(+), 11 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c index 219c10eb752c..b6984be0c515 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c @@ -738,7 +738,7 @@ static ssize_t s_exlevel_vinst_show(struct device *dev, struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent); struct etmv4_config *config = &drvdata->config;

- val = BMVAL(config->vinst_ctrl, 16, 19); + val = (config->vinst_ctrl & ETM_EXLEVEL_S_VICTLR_MASK) >> 16; return scnprintf(buf, PAGE_SIZE, "%#lx\n", val); }

@@ -754,8 +754,8 @@ static ssize_t s_exlevel_vinst_store(struct device *dev, return -EINVAL;

spin_lock(&drvdata->spinlock); - /* clear all EXLEVEL_S bits (bit[18] is never implemented) */ - config->vinst_ctrl &= ~(BIT(16) | BIT(17) | BIT(19)); + /* clear all EXLEVEL_S bits */ + config->vinst_ctrl &= ~(ETM_EXLEVEL_S_VICTLR_MASK); /* enable instruction tracing for corresponding exception level */ val &= drvdata->s_ex_level; config->vinst_ctrl |= (val << 16); @@ -773,7 +773,7 @@ static ssize_t ns_exlevel_vinst_show(struct device *dev, struct etmv4_config *config = &drvdata->config;

/* EXLEVEL_NS, bits[23:20] */ - val = BMVAL(config->vinst_ctrl, 20, 23); + val = (config->vinst_ctrl & ETM_EXLEVEL_NS_VICTLR_MASK) >> 20; return scnprintf(buf, PAGE_SIZE, "%#lx\n", val); }

@@ -789,8 +789,8 @@ static ssize_t ns_exlevel_vinst_store(struct device *dev, return -EINVAL;

spin_lock(&drvdata->spinlock); - /* clear EXLEVEL_NS bits (bit[23] is never implemented */ - config->vinst_ctrl &= ~(BIT(20) | BIT(21) | BIT(22)); + /* clear EXLEVEL_NS bits */ + config->vinst_ctrl &= ~(ETM_EXLEVEL_NS_VICTLR_MASK); /* enable instruction tracing for corresponding exception level */ val &= drvdata->ns_ex_level; config->vinst_ctrl |= (val << 20); diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c index a128b5063f46..52b8876de157 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x.c +++ b/drivers/hwtracing/coresight/coresight-etm4x.c @@ -629,6 +629,7 @@ static void etm4_init_arch_data(void *info) * TRCARCHMAJ, bits[11:8] architecture major versin number */ drvdata->arch = BMVAL(etmidr1, 4, 11); + drvdata->config.arch = drvdata->arch;

/* maximum size of resources */ etmidr2 = readl_relaxed(drvdata->base + TRCIDR2); @@ -780,6 +781,7 @@ static u64 etm4_get_ns_access_type(struct etmv4_config *config) static u64 etm4_get_access_type(struct etmv4_config *config) { u64 access_type = etm4_get_ns_access_type(config); + u64 s_hyp = (config->arch & 0x0f) >= 0x4 ? ETM_EXLEVEL_S_HYP : 0;

/* * EXLEVEL_S, bits[11:8], don't trace anything happening @@ -787,7 +789,8 @@ static u64 etm4_get_access_type(struct etmv4_config *config) */ access_type |= (ETM_EXLEVEL_S_APP | ETM_EXLEVEL_S_OS | - ETM_EXLEVEL_S_HYP); + s_hyp | + ETM_EXLEVEL_S_MON);

return access_type; } diff --git a/drivers/hwtracing/coresight/coresight-etm4x.h b/drivers/hwtracing/coresight/coresight-etm4x.h index 4523f10ddd0f..60bc2fb5159b 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x.h +++ b/drivers/hwtracing/coresight/coresight-etm4x.h @@ -180,17 +180,22 @@ /* PowerDown Control Register bits */ #define TRCPDCR_PU BIT(3)

-/* secure state access levels */ +/* secure state access levels - TRCACATRn */ #define ETM_EXLEVEL_S_APP BIT(8) #define ETM_EXLEVEL_S_OS BIT(9) -#define ETM_EXLEVEL_S_NA BIT(10) -#define ETM_EXLEVEL_S_HYP BIT(11) -/* non-secure state access levels */ +#define ETM_EXLEVEL_S_HYP BIT(10) +#define ETM_EXLEVEL_S_MON BIT(11) +/* non-secure state access levels - TRCACATRn */ #define ETM_EXLEVEL_NS_APP BIT(12) #define ETM_EXLEVEL_NS_OS BIT(13) #define ETM_EXLEVEL_NS_HYP BIT(14) #define ETM_EXLEVEL_NS_NA BIT(15)

+/* secure / non secure masks - TRCVICTLR, IDR3 */ +#define ETM_EXLEVEL_S_VICTLR_MASK GENMASK(19, 16) +/* NS MON (EL3) mode never implemented */ +#define ETM_EXLEVEL_NS_VICTLR_MASK GENMASK(22, 20) + /** * struct etmv4_config - configuration information related to an ETMv4 * @mode: Controls various modes supported by this ETM. @@ -237,6 +242,7 @@ * @vmid_mask0: VM ID comparator mask for comparator 0-3. * @vmid_mask1: VM ID comparator mask for comparator 4-7. * @ext_inp: External input selection. + * @arch: ETM architecture version (for arch dependent config). */ struct etmv4_config { u32 mode; @@ -279,6 +285,7 @@ struct etmv4_config { u32 vmid_mask0; u32 vmid_mask1; u32 ext_inp; + u8 arch; };

/**

-- 2.17.1

Mike Leach

9:33 p.m.

New subject: [PATCH v2 02/11] coresight: etm4x: Fix input validation for sysfs.

A number of issues are fixed relating to sysfs input validation:-

1) bb_ctrl_store() - incorrect compare of bit select field to absolute value. Reworked per ETMv4 specification. 2) seq_event_store() - incorrect mask value - register has two event values. 3) cyc_threshold_store() - must mask with max before checking min otherwise wrapped values can set illegal value below min. 4) res_ctrl_store() - update to mask off all res0 bits.

Reviewed-by: Leo Yan leo.yan@linaro.org Reviewed-by: Mathieu Poirier mathieu.poirier@linaro.org Signed-off-by: Mike Leach mike.leach@linaro.org --- .../coresight/coresight-etm4x-sysfs.c | 21 ++++++++++++------- 1 file changed, 13 insertions(+), 8 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c index b6984be0c515..cc8156318018 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c @@ -652,10 +652,13 @@ static ssize_t cyc_threshold_store(struct device *dev,

if (kstrtoul(buf, 16, &val)) return -EINVAL; + + /* mask off max threshold before checking min value */ + val &= ETM_CYC_THRESHOLD_MASK; if (val < drvdata->ccitmin) return -EINVAL;

- config->ccctlr = val & ETM_CYC_THRESHOLD_MASK; + config->ccctlr = val; return size; } static DEVICE_ATTR_RW(cyc_threshold); @@ -686,14 +689,16 @@ static ssize_t bb_ctrl_store(struct device *dev, return -EINVAL; if (!drvdata->nr_addr_cmp) return -EINVAL; + /* - * Bit[7:0] selects which address range comparator is used for - * branch broadcast control. + * Bit[8] controls include(1) / exclude(0), bits[0-7] select + * individual range comparators. If include then at least 1 + * range must be selected. */ - if (BMVAL(val, 0, 7) > drvdata->nr_addr_cmp) + if ((val & BIT(8)) && (BMVAL(val, 0, 7) == 0)) return -EINVAL;

- config->bb_ctrl = val; + config->bb_ctrl = val & GENMASK(8, 0); return size; } static DEVICE_ATTR_RW(bb_ctrl); @@ -1324,8 +1329,8 @@ static ssize_t seq_event_store(struct device *dev,

spin_lock(&drvdata->spinlock); idx = config->seq_idx; - /* RST, bits[7:0] */ - config->seq_ctrl[idx] = val & 0xFF; + /* Seq control has two masks B[15:8] F[7:0] */ + config->seq_ctrl[idx] = val & 0xFFFF; spin_unlock(&drvdata->spinlock); return size; } @@ -1580,7 +1585,7 @@ static ssize_t res_ctrl_store(struct device *dev, if (idx % 2 != 0) /* PAIRINV, bit[21] */ val &= ~BIT(21); - config->res_ctrl[idx] = val; + config->res_ctrl[idx] = val & GENMASK(21, 0); spin_unlock(&drvdata->spinlock); return size; }

-- 2.17.1

Suzuki K Poulose

17 Sep 17 Sep

9:33 a.m.

New subject: [PATCH v2 02/11] coresight: etm4x: Fix input validation for sysfs.

On 29/08/2019 22:33, Mike Leach wrote:

...

A number of issues are fixed relating to sysfs input validation:-

bb_ctrl_store() - incorrect compare of bit select field to absolute

value. Reworked per ETMv4 specification. 2) seq_event_store() - incorrect mask value - register has two event values. 3) cyc_threshold_store() - must mask with max before checking min otherwise wrapped values can set illegal value below min. 4) res_ctrl_store() - update to mask off all res0 bits.

Reviewed-by: Leo Yan leo.yan@linaro.org Reviewed-by: Mathieu Poirier mathieu.poirier@linaro.org Signed-off-by: Mike Leach mike.leach@linaro.org

Does this need to goto stable ? May be add a Fixes tag ? It fixes real issues with the values that could be programmed into these registers.

Cheers Suzuki

Mike Leach

29 Aug 29 Aug

9:33 p.m.

New subject: [PATCH v2 03/11] coresight: etm4x: Add missing API to set EL match on address filters

TRCACATRn registers have match bits for secure and non-secure exception levels which are not accessible by the sysfs API. This adds a new sysfs parameter to enable this - addr_exlevel_s_ns.

Signed-off-by: Mike Leach mike.leach@linaro.org --- .../coresight/coresight-etm4x-sysfs.c | 42 +++++++++++++++++++ 1 file changed, 42 insertions(+)

diff --git a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c index cc8156318018..b520f3c1521f 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c @@ -1233,6 +1233,47 @@ static ssize_t addr_context_store(struct device *dev, } static DEVICE_ATTR_RW(addr_context);

+static ssize_t addr_exlevel_s_ns_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + u8 idx; + unsigned long val; + struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent); + struct etmv4_config *config = &drvdata->config; + + spin_lock(&drvdata->spinlock); + idx = config->addr_idx; + val = BMVAL(config->addr_acc[idx], 14, 8); + spin_unlock(&drvdata->spinlock); + return scnprintf(buf, PAGE_SIZE, "%#lx\n", val); +} + +static ssize_t addr_exlevel_s_ns_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + u8 idx; + unsigned long val; + struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent); + struct etmv4_config *config = &drvdata->config; + + if (kstrtoul(buf, 16, &val)) + return -EINVAL; + + if (val & ~0x7F) + return -EINVAL; + + spin_lock(&drvdata->spinlock); + idx = config->addr_idx; + /* clear Exlevel_ns & Exlevel_s bits[14:12, 11:8] */ + config->addr_acc[idx] &= ~(GENMASK(14, 8)); + config->addr_acc[idx] |= (val << 8); + spin_unlock(&drvdata->spinlock); + return size; +} +static DEVICE_ATTR_RW(addr_exlevel_s_ns); + static ssize_t seq_idx_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -2038,6 +2079,7 @@ static struct attribute *coresight_etmv4_attrs[] = { &dev_attr_addr_stop.attr, &dev_attr_addr_ctxtype.attr, &dev_attr_addr_context.attr, + &dev_attr_addr_exlevel_s_ns.attr, &dev_attr_seq_idx.attr, &dev_attr_seq_state.attr, &dev_attr_seq_event.attr,

-- 2.17.1

Suzuki K Poulose

17 Sep 17 Sep

9:31 a.m.

New subject: [PATCH v2 03/11] coresight: etm4x: Add missing API to set EL match on address filters

Hi Mike,

On 29/08/2019 22:33, Mike Leach wrote:

...

TRCACATRn registers have match bits for secure and non-secure exception levels which are not accessible by the sysfs API. This adds a new sysfs parameter to enable this - addr_exlevel_s_ns.

Looks good to me. Some minor nits below.

...

Signed-off-by: Mike Leach mike.leach@linaro.org

.../coresight/coresight-etm4x-sysfs.c | 42 +++++++++++++++++++ 1 file changed, 42 insertions(+)

diff --git a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c index cc8156318018..b520f3c1521f 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c @@ -1233,6 +1233,47 @@ static ssize_t addr_context_store(struct device *dev, } static DEVICE_ATTR_RW(addr_context); +static ssize_t addr_exlevel_s_ns_show(struct device *dev,
		      struct device_attribute *attr,
		      char *buf)
+{

u8 idx;

unsigned long val;

struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);

struct etmv4_config *config = &drvdata->config;

spin_lock(&drvdata->spinlock);

idx = config->addr_idx;

val = BMVAL(config->addr_acc[idx], 14, 8);

spin_unlock(&drvdata->spinlock);

return scnprintf(buf, PAGE_SIZE, "%#lx\n", val);

+}

+static ssize_t addr_exlevel_s_ns_store(struct device *dev,
		       struct device_attribute *attr,
		       const char *buf, size_t size)
+{
u8 idx;

unsigned long val;

struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);

struct etmv4_config *config = &drvdata->config;

if (kstrtoul(buf, 16, &val))
return -EINVAL;

Can this be 0 instead of 16 to accept any base ?

...

if (val & ~0x7F)

minor nit: Do we need to use (GENMASK(14, 8) >> 8) here instead of hard coding the mask ?

...

return -EINVAL;
spin_lock(&drvdata->spinlock);

idx = config->addr_idx;

/* clear Exlevel_ns & Exlevel_s bits[14:12, 11:8] */

It may be worth adding a comment that bit[15] is RES0.

...

config->addr_acc[idx] &= ~(GENMASK(14, 8));

config->addr_acc[idx] |= (val << 8);

spin_unlock(&drvdata->spinlock);

return size;

+} +static DEVICE_ATTR_RW(addr_exlevel_s_ns);

static ssize_t seq_idx_show(struct device *dev, struct device_attribute *attr, char *buf)

@@ -2038,6 +2079,7 @@ static struct attribute *coresight_etmv4_attrs[] = { &dev_attr_addr_stop.attr, &dev_attr_addr_ctxtype.attr, &dev_attr_addr_context.attr,

&dev_attr_addr_exlevel_s_ns.attr, &dev_attr_seq_idx.attr, &dev_attr_seq_state.attr, &dev_attr_seq_event.attr,

Either ways, irrespective of the above comments :

Reviewed-by: Suzuki K Poulose suzuki.poulose@arm.com

Rikard Falkeborn

26 Oct 26 Oct

8:26 p.m.

New subject: [PATCH] coresight: etm4x: Fix BMVAL misuse

The second argument should be the lsb and the third argument should be the msb.

Fixes: 62ab9bce3bc7 ("coresight: etm4x: Add missing API to set EL match on address filters") Signed-off-by: Rikard Falkeborn rikard.falkeborn@gmail.com --- Spotted while trying to get compile time checking that the order of the arguments to GENMASK macro is correct (BMVAL uses GENMASK).

I have only compile tested the patch.

drivers/hwtracing/coresight/coresight-etm4x-sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c index 3fc12ac44270..ce41482431f9 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c @@ -1246,7 +1246,7 @@ static ssize_t addr_exlevel_s_ns_show(struct device *dev,

spin_lock(&drvdata->spinlock); idx = config->addr_idx; - val = BMVAL(config->addr_acc[idx], 14, 8); + val = BMVAL(config->addr_acc[idx], 8, 14); spin_unlock(&drvdata->spinlock); return scnprintf(buf, PAGE_SIZE, "%#lx\n", val); }

-- 2.23.0

Mathieu Poirier

30 Oct 30 Oct

3:19 p.m.

New subject: [PATCH] coresight: etm4x: Fix BMVAL misuse

On Sat, 26 Oct 2019 at 14:26, Rikard Falkeborn rikard.falkeborn@gmail.com wrote:

...

The second argument should be the lsb and the third argument should be the msb.

Fixes: 62ab9bce3bc7 ("coresight: etm4x: Add missing API to set EL match on address filters") Signed-off-by: Rikard Falkeborn rikard.falkeborn@gmail.com

Spotted while trying to get compile time checking that the order of the arguments to GENMASK macro is correct (BMVAL uses GENMASK).

I have only compile tested the patch.

drivers/hwtracing/coresight/coresight-etm4x-sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c index 3fc12ac44270..ce41482431f9 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c @@ -1246,7 +1246,7 @@ static ssize_t addr_exlevel_s_ns_show(struct device *dev,
    spin_lock(&drvdata->spinlock);
    idx = config->addr_idx;
  val = BMVAL(config->addr_acc[idx], 14, 8);
  val = BMVAL(config->addr_acc[idx], 8, 14);

Good catch - thank you for that, Mathieu

...

    spin_unlock(&drvdata->spinlock);
    return scnprintf(buf, PAGE_SIZE, "%#lx\n", val);

}

2.23.0

Mike Leach

29 Aug 29 Aug

9:33 p.m.

New subject: [PATCH v2 04/11] coresight: etm4x: Fix issues with start-stop logic.

Fixes the following issues when using the ETMv4 start-stop logic.

1) Setting a start or a stop address should not automatically set the start-stop status to 'on'. The value set by the user in 'mode' must be respected or start instances could be missed. 2) Missing API for controlling TRCVIPCSSCTLR - start stop control by PE comparators. 3) Default ETM configuration sets a trace all range, and correctly sets the start-stop status bit. This was not being correctly reflected in the 'mode' parameter.

Signed-off-by: Mike Leach mike.leach@linaro.org --- .../coresight/coresight-etm4x-sysfs.c | 39 +++++++++++++++++-- drivers/hwtracing/coresight/coresight-etm4x.c | 1 + 2 files changed, 36 insertions(+), 4 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c index b520f3c1521f..11730a194951 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c @@ -217,6 +217,7 @@ static ssize_t reset_store(struct device *dev,

/* No start-stop filtering for ViewInst */ config->vissctlr = 0x0; + config->vipcssctlr = 0x0;

/* Disable seq events */ for (i = 0; i < drvdata->nrseqstate-1; i++) @@ -1059,8 +1060,6 @@ static ssize_t addr_start_store(struct device *dev, config->addr_val[idx] = (u64)val; config->addr_type[idx] = ETM_ADDR_TYPE_START; config->vissctlr |= BIT(idx); - /* SSSTATUS, bit[9] - turn on start/stop logic */ - config->vinst_ctrl |= BIT(9); spin_unlock(&drvdata->spinlock); return size; } @@ -1116,8 +1115,6 @@ static ssize_t addr_stop_store(struct device *dev, config->addr_val[idx] = (u64)val; config->addr_type[idx] = ETM_ADDR_TYPE_STOP; config->vissctlr |= BIT(idx + 16); - /* SSSTATUS, bit[9] - turn on start/stop logic */ - config->vinst_ctrl |= BIT(9); spin_unlock(&drvdata->spinlock); return size; } @@ -1274,6 +1271,39 @@ static ssize_t addr_exlevel_s_ns_store(struct device *dev, } static DEVICE_ATTR_RW(addr_exlevel_s_ns);

+static ssize_t vinst_pe_cmp_start_stop_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + unsigned long val; + struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent); + struct etmv4_config *config = &drvdata->config; + + if (!drvdata->nr_pe_cmp) + return -EINVAL; + val = config->vipcssctlr; + return scnprintf(buf, PAGE_SIZE, "%#lx\n", val); +} +static ssize_t vinst_pe_cmp_start_stop_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + unsigned long val; + struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent); + struct etmv4_config *config = &drvdata->config; + + if (kstrtoul(buf, 16, &val)) + return -EINVAL; + if (!drvdata->nr_pe_cmp) + return -EINVAL; + + spin_lock(&drvdata->spinlock); + config->vipcssctlr = val; + spin_unlock(&drvdata->spinlock); + return size; +} +static DEVICE_ATTR_RW(vinst_pe_cmp_start_stop); + static ssize_t seq_idx_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -2080,6 +2110,7 @@ static struct attribute *coresight_etmv4_attrs[] = { &dev_attr_addr_ctxtype.attr, &dev_attr_addr_context.attr, &dev_attr_addr_exlevel_s_ns.attr, + &dev_attr_vinst_pe_cmp_start_stop.attr, &dev_attr_seq_idx.attr, &dev_attr_seq_state.attr, &dev_attr_seq_event.attr, diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c index 52b8876de157..d8b078d0cc7f 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x.c +++ b/drivers/hwtracing/coresight/coresight-etm4x.c @@ -868,6 +868,7 @@ static void etm4_set_default_filter(struct etmv4_config *config) * in the started state */ config->vinst_ctrl |= BIT(9); + config->mode |= ETM_MODE_VIEWINST_STARTSTOP;

/* No start-stop filtering for ViewInst */ config->vissctlr = 0x0;

-- 2.17.1

Mike Leach

9:33 p.m.

New subject: [PATCH v2 05/11] coresight: etm4x: Improve usability of sysfs - include/exclude addr.

Setting include / exclude on a range had to be done by setting the bit in 'mode' before setting the range. However, setting this bit also had the effect of altering the current range as well.

Changed to only set include / exclude setting of a range at the point of setting that range. Either use a 3rd input parameter as the include exclude value, or if not present use the current value of 'mode'. Do not change current range when 'mode' changes.

Reviewed-by: Mathieu Poirier mathieu.poirier@linaro.org Signed-off-by: Mike Leach mike.leach@linaro.org --- .../hwtracing/coresight/coresight-etm4x-sysfs.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c index 11730a194951..e4a9ce76ed33 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c @@ -297,8 +297,6 @@ static ssize_t mode_store(struct device *dev,

spin_lock(&drvdata->spinlock); config->mode = val & ETMv4_MODE_ALL; - etm4_set_mode_exclude(drvdata, - config->mode & ETM_MODE_EXCLUDE ? true : false);

if (drvdata->instrp0 == true) { /* start by clearing instruction P0 field */ @@ -972,8 +970,12 @@ static ssize_t addr_range_store(struct device *dev, unsigned long val1, val2; struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent); struct etmv4_config *config = &drvdata->config; + int elements, exclude;

- if (sscanf(buf, "%lx %lx", &val1, &val2) != 2) + elements = sscanf(buf, "%lx %lx %x", &val1, &val2, &exclude); + + /* exclude is optional, but need at least two parameter */ + if (elements < 2) return -EINVAL; /* lower address comparator cannot have a higher address value */ if (val1 > val2) @@ -1001,9 +1003,11 @@ static ssize_t addr_range_store(struct device *dev, /* * Program include or exclude control bits for vinst or vdata * whenever we change addr comparators to ETM_ADDR_TYPE_RANGE + * use supplied value, or default to bit set in 'mode' */ - etm4_set_mode_exclude(drvdata, - config->mode & ETM_MODE_EXCLUDE ? true : false); + if (elements != 3) + exclude = config->mode & ETM_MODE_EXCLUDE; + etm4_set_mode_exclude(drvdata, exclude ? true : false);

spin_unlock(&drvdata->spinlock); return size;

-- 2.17.1

Mike Leach

9:33 p.m.

New subject: [PATCH v2 06/11] coresight: etm4x: Improve usability of sysfs - CID and VMID masks.

Context ID and VM ID masks required 2 value inputs, even when the second value is ignored as insufficient CID / VMID comparators are implemented.

Permit a single value to be used if that is sufficient to cover all implemented comparators.

Reviewed-by: Mathieu Poirier mathieu.poirier@linaro.org Signed-off-by: Mike Leach mike.leach@linaro.org --- drivers/hwtracing/coresight/coresight-etm4x-sysfs.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c index e4a9ce76ed33..171d3c580968 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c @@ -1794,6 +1794,7 @@ static ssize_t ctxid_masks_store(struct device *dev, unsigned long val1, val2, mask; struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent); struct etmv4_config *config = &drvdata->config; + int nr_inputs;

/* * Don't use contextID tracing if coming from a PID namespace. See @@ -1809,7 +1810,9 @@ static ssize_t ctxid_masks_store(struct device *dev, */ if (!drvdata->ctxid_size || !drvdata->numcidc) return -EINVAL; - if (sscanf(buf, "%lx %lx", &val1, &val2) != 2) + /* one mask if <= 4 comparators, two for up to 8 */ + nr_inputs = sscanf(buf, "%lx %lx", &val1, &val2); + if ((drvdata->numcidc > 4) && (nr_inputs != 2)) return -EINVAL;

spin_lock(&drvdata->spinlock); @@ -1983,6 +1986,7 @@ static ssize_t vmid_masks_store(struct device *dev, unsigned long val1, val2, mask; struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent); struct etmv4_config *config = &drvdata->config; + int nr_inputs;

/* * only implemented when vmid tracing is enabled, i.e. at least one @@ -1990,7 +1994,9 @@ static ssize_t vmid_masks_store(struct device *dev, */ if (!drvdata->vmid_size || !drvdata->numvmidc) return -EINVAL; - if (sscanf(buf, "%lx %lx", &val1, &val2) != 2) + /* one mask if <= 4 comparators, two for up to 8 */ + nr_inputs = sscanf(buf, "%lx %lx", &val1, &val2); + if ((drvdata->numvmidc > 4) && (nr_inputs != 2)) return -EINVAL;

spin_lock(&drvdata->spinlock);

-- 2.17.1

Mike Leach

9:33 p.m.

New subject: [PATCH v2 07/11] coresight: etm4x: Add view comparator settings API to sysfs.

Currently it is not possible to view the current settings of a given address comparator without knowing what type it is set to. For example, if a comparator is set as an addr_start comparator, attempting to read addr_stop for the same index will result in an error.

addr_cmp_view is added to allow the user to see the current settings of the indexed address comparator without resorting to trial and error when the set type is not known.

Reviewed-by: Mathieu Poirier mathieu.poirier@linaro.org Reviewed-by: Leo Yan leo.yan@linaro.org Signed-off-by: Mike Leach mike.leach@linaro.org --- .../coresight/coresight-etm4x-sysfs.c | 52 +++++++++++++++++++ 1 file changed, 52 insertions(+)

diff --git a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c index 171d3c580968..a8c9eadfe56f 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c @@ -1275,6 +1275,57 @@ static ssize_t addr_exlevel_s_ns_store(struct device *dev, } static DEVICE_ATTR_RW(addr_exlevel_s_ns);

+static const char * const addr_type_names[] = { + "unused", + "single", + "range", + "start", + "stop" +}; + +static ssize_t addr_cmp_view_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + u8 idx, addr_type; + unsigned long addr_v, addr_v2, addr_ctrl; + struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent); + struct etmv4_config *config = &drvdata->config; + int size = 0; + bool exclude = false; + + spin_lock(&drvdata->spinlock); + idx = config->addr_idx; + addr_v = config->addr_val[idx]; + addr_ctrl = config->addr_acc[idx]; + addr_type = config->addr_type[idx]; + if (addr_type == ETM_ADDR_TYPE_RANGE) { + if (idx & 0x1) { + idx -= 1; + addr_v2 = addr_v; + addr_v = config->addr_val[idx]; + } else { + addr_v2 = config->addr_val[idx + 1]; + } + exclude = config->viiectlr & BIT(idx / 2 + 16); + } + spin_unlock(&drvdata->spinlock); + if (addr_type) { + size = scnprintf(buf, PAGE_SIZE, "addr_cmp[%i] %s %#lx", idx, + addr_type_names[addr_type], addr_v); + if (addr_type == ETM_ADDR_TYPE_RANGE) { + size += scnprintf(buf + size, PAGE_SIZE - size, + " %#lx %s", addr_v2, + exclude ? "exclude" : "include"); + } + size += scnprintf(buf + size, PAGE_SIZE - size, + " ctrl(%#lx)\n", addr_ctrl); + } else { + size = scnprintf(buf, PAGE_SIZE, "addr_cmp[%i] unused\n", idx); + } + return size; +} +static DEVICE_ATTR_RO(addr_cmp_view); + static ssize_t vinst_pe_cmp_start_stop_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -2120,6 +2171,7 @@ static struct attribute *coresight_etmv4_attrs[] = { &dev_attr_addr_ctxtype.attr, &dev_attr_addr_context.attr, &dev_attr_addr_exlevel_s_ns.attr, + &dev_attr_addr_cmp_view.attr, &dev_attr_vinst_pe_cmp_start_stop.attr, &dev_attr_seq_idx.attr, &dev_attr_seq_state.attr,

-- 2.17.1

Mike Leach

9:33 p.m.

New subject: [PATCH v2 08/11] coresight: etm4x: Add missing single-shot control API to sysfs

An API to control single-shot comparator operation was missing from sysfs. This adds the parameters to sysfs to allow programming of this feature.

Signed-off-by: Mike Leach mike.leach@linaro.org --- .../coresight/coresight-etm4x-sysfs.c | 122 ++++++++++++++++++ drivers/hwtracing/coresight/coresight-etm4x.c | 26 +++- drivers/hwtracing/coresight/coresight-etm4x.h | 3 + 3 files changed, 150 insertions(+), 1 deletion(-)

diff --git a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c index a8c9eadfe56f..14be3274f8d9 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c @@ -239,6 +239,7 @@ static ssize_t reset_store(struct device *dev, for (i = 0; i < drvdata->nr_resource; i++) config->res_ctrl[i] = 0x0;

+ config->ss_idx = 0x0; for (i = 0; i < drvdata->nr_ss_cmp; i++) { config->ss_ctrl[i] = 0x0; config->ss_pe_cmp[i] = 0x0; @@ -1717,6 +1718,123 @@ static ssize_t res_ctrl_store(struct device *dev, } static DEVICE_ATTR_RW(res_ctrl);

+static ssize_t sshot_idx_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + unsigned long val; + struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent); + struct etmv4_config *config = &drvdata->config; + + val = config->ss_idx; + return scnprintf(buf, PAGE_SIZE, "%#lx\n", val); +} + +static ssize_t sshot_idx_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + unsigned long val; + struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent); + struct etmv4_config *config = &drvdata->config; + + if (kstrtoul(buf, 16, &val)) + return -EINVAL; + if (val >= drvdata->nr_ss_cmp) + return -EINVAL; + + spin_lock(&drvdata->spinlock); + config->ss_idx = val; + spin_unlock(&drvdata->spinlock); + return size; +} +static DEVICE_ATTR_RW(sshot_idx); + +static ssize_t sshot_ctrl_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + unsigned long val; + struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent); + struct etmv4_config *config = &drvdata->config; + + spin_lock(&drvdata->spinlock); + val = config->ss_ctrl[config->ss_idx]; + spin_unlock(&drvdata->spinlock); + return scnprintf(buf, PAGE_SIZE, "%#lx\n", val); +} + +static ssize_t sshot_ctrl_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + u8 idx; + unsigned long val; + struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent); + struct etmv4_config *config = &drvdata->config; + + if (kstrtoul(buf, 16, &val)) + return -EINVAL; + + spin_lock(&drvdata->spinlock); + idx = config->ss_idx; + config->ss_ctrl[idx] = val & GENMASK(24, 0); + /* must clear bit 31 in related status register on programming */ + config->ss_status[idx] &= ~BIT(31); + spin_unlock(&drvdata->spinlock); + return size; +} +static DEVICE_ATTR_RW(sshot_ctrl); + +static ssize_t sshot_status_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + unsigned long val; + struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent); + struct etmv4_config *config = &drvdata->config; + + spin_lock(&drvdata->spinlock); + val = config->ss_status[config->ss_idx]; + spin_unlock(&drvdata->spinlock); + return scnprintf(buf, PAGE_SIZE, "%#lx\n", val); +} +static DEVICE_ATTR_RO(sshot_status); + +static ssize_t sshot_pe_ctrl_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + unsigned long val; + struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent); + struct etmv4_config *config = &drvdata->config; + + spin_lock(&drvdata->spinlock); + val = config->ss_pe_cmp[config->ss_idx]; + spin_unlock(&drvdata->spinlock); + return scnprintf(buf, PAGE_SIZE, "%#lx\n", val); +} + +static ssize_t sshot_pe_ctrl_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + u8 idx; + unsigned long val; + struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent); + struct etmv4_config *config = &drvdata->config; + + if (kstrtoul(buf, 16, &val)) + return -EINVAL; + + spin_lock(&drvdata->spinlock); + idx = config->ss_idx; + config->ss_pe_cmp[idx] = val & GENMASK(7, 0); + /* must clear bit 31 in related status register on programming */ + config->ss_status[idx] &= ~BIT(31); + spin_unlock(&drvdata->spinlock); + return size; +} +static DEVICE_ATTR_RW(sshot_pe_ctrl); + static ssize_t ctxid_idx_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -2173,6 +2291,10 @@ static struct attribute *coresight_etmv4_attrs[] = { &dev_attr_addr_exlevel_s_ns.attr, &dev_attr_addr_cmp_view.attr, &dev_attr_vinst_pe_cmp_start_stop.attr, + &dev_attr_sshot_idx.attr, + &dev_attr_sshot_ctrl.attr, + &dev_attr_sshot_pe_ctrl.attr, + &dev_attr_sshot_status.attr, &dev_attr_seq_idx.attr, &dev_attr_seq_state.attr, &dev_attr_seq_event.attr, diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c index d8b078d0cc7f..fb7083218410 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x.c +++ b/drivers/hwtracing/coresight/coresight-etm4x.c @@ -149,6 +149,9 @@ static int etm4_enable_hw(struct etmv4_drvdata *drvdata) drvdata->base + TRCRSCTLRn(i));

for (i = 0; i < drvdata->nr_ss_cmp; i++) { + /* always clear status bit on restart if using single-shot */ + if (config->ss_ctrl[i] || config->ss_pe_cmp[i]) + config->ss_status[i] &= ~BIT(31); writel_relaxed(config->ss_ctrl[i], drvdata->base + TRCSSCCRn(i)); writel_relaxed(config->ss_status[i], @@ -448,6 +451,9 @@ static void etm4_disable_hw(void *info) { u32 control; struct etmv4_drvdata *drvdata = info; + struct etmv4_config *config = &drvdata->config; + struct device *etm_dev = &drvdata->csdev->dev; + int i;

CS_UNLOCK(drvdata->base);

@@ -470,6 +476,18 @@ static void etm4_disable_hw(void *info) isb(); writel_relaxed(control, drvdata->base + TRCPRGCTLR);

+ /* wait for TRCSTATR.PMSTABLE to go to '1' */ + if (coresight_timeout(drvdata->base, TRCSTATR, + TRCSTATR_PMSTABLE_BIT, 1)) + dev_err(etm_dev, + "timeout while waiting for PM stable Trace Status\n"); + + /* read the status of the single shot comparators */ + for (i = 0; i < drvdata->nr_ss_cmp; i++) { + config->ss_status[i] = + readl_relaxed(drvdata->base + TRCSSCSRn(i)); + } + coresight_disclaim_device_unlocked(drvdata->base);

CS_LOCK(drvdata->base); @@ -576,6 +594,7 @@ static void etm4_init_arch_data(void *info) u32 etmidr4; u32 etmidr5; struct etmv4_drvdata *drvdata = info; + int i;

/* Make sure all registers are accessible */ etm4_os_unlock(drvdata); @@ -699,9 +718,14 @@ static void etm4_init_arch_data(void *info) drvdata->nr_resource = BMVAL(etmidr4, 16, 19) + 1; /* * NUMSSCC, bits[23:20] the number of single-shot - * comparator control for tracing + * comparator control for tracing. Read any status regs as these + * also contain RO capability data. */ drvdata->nr_ss_cmp = BMVAL(etmidr4, 20, 23); + for (i = 0; i < drvdata->nr_ss_cmp; i++) { + drvdata->config.ss_status[i] = + readl_relaxed(drvdata->base + TRCSSCSRn(i)); + } /* NUMCIDC, bits[27:24] number of Context ID comparators for tracing */ drvdata->numcidc = BMVAL(etmidr4, 24, 27); /* NUMVMIDC, bits[31:28] number of VMID comparators for tracing */ diff --git a/drivers/hwtracing/coresight/coresight-etm4x.h b/drivers/hwtracing/coresight/coresight-etm4x.h index 60bc2fb5159b..be8b32ea1654 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x.h +++ b/drivers/hwtracing/coresight/coresight-etm4x.h @@ -175,6 +175,7 @@ ETM_MODE_EXCL_USER)

#define TRCSTATR_IDLE_BIT 0 +#define TRCSTATR_PMSTABLE_BIT 1 #define ETM_DEFAULT_ADDR_COMP 0

/* PowerDown Control Register bits */ @@ -226,6 +227,7 @@ * @cntr_val: Sets or returns the value for a counter. * @res_idx: Resource index selector. * @res_ctrl: Controls the selection of the resources in the trace unit. + * @ss_idx: Single-shot index selector. * @ss_ctrl: Controls the corresponding single-shot comparator resource. * @ss_status: The status of the corresponding single-shot comparator. * @ss_pe_cmp: Selects the PE comparator inputs for Single-shot control. @@ -269,6 +271,7 @@ struct etmv4_config { u32 cntr_val[ETMv4_MAX_CNTR]; u8 res_idx; u32 res_ctrl[ETM_MAX_RES_SEL]; + u8 ss_idx; u32 ss_ctrl[ETM_MAX_SS_CMP]; u32 ss_status[ETM_MAX_SS_CMP]; u32 ss_pe_cmp[ETM_MAX_SS_CMP];

-- 2.17.1

Mike Leach

9:33 p.m.

New subject: [PATCH v2 09/11] coresight: etm4x: docs: Update ABI doc for sysfs features added.

Update document to include the new sysfs features added during this patchset.

Updated to reflect the new sysfs component nameing schema.

Signed-off-by: Mike Leach mike.leach@linaro.org --- .../testing/sysfs-bus-coresight-devices-etm4x | 183 +++++++++++------- 1 file changed, 115 insertions(+), 68 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x index 36258bc1b473..112c50ae9986 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x @@ -1,4 +1,4 @@ -What: /sys/bus/coresight/devices/<memory_map>.etm/enable_source +What: /sys/bus/coresight/devices/etm<N>/enable_source Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org @@ -8,82 +8,82 @@ Description: (RW) Enable/disable tracing on this specific trace entiry. of coresight components linking the source to the sink is configured and managed automatically by the coresight framework.

-What: /sys/bus/coresight/devices/<memory_map>.etm/cpu +What: /sys/bus/coresight/devices/etm<N>/cpu Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) The CPU this tracing entity is associated with.

-What: /sys/bus/coresight/devices/<memory_map>.etm/nr_pe_cmp +What: /sys/bus/coresight/devices/etm<N>/nr_pe_cmp Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Indicates the number of PE comparator inputs that are available for tracing.

-What: /sys/bus/coresight/devices/<memory_map>.etm/nr_addr_cmp +What: /sys/bus/coresight/devices/etm<N>/nr_addr_cmp Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Indicates the number of address comparator pairs that are available for tracing.

-What: /sys/bus/coresight/devices/<memory_map>.etm/nr_cntr +What: /sys/bus/coresight/devices/etm<N>/nr_cntr Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Indicates the number of counters that are available for tracing.

-What: /sys/bus/coresight/devices/<memory_map>.etm/nr_ext_inp +What: /sys/bus/coresight/devices/etm<N>/nr_ext_inp Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Indicates how many external inputs are implemented.

-What: /sys/bus/coresight/devices/<memory_map>.etm/numcidc +What: /sys/bus/coresight/devices/etm<N>/numcidc Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Indicates the number of Context ID comparators that are available for tracing.

-What: /sys/bus/coresight/devices/<memory_map>.etm/numvmidc +What: /sys/bus/coresight/devices/etm<N>/numvmidc Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Indicates the number of VMID comparators that are available for tracing.

-What: /sys/bus/coresight/devices/<memory_map>.etm/nrseqstate +What: /sys/bus/coresight/devices/etm<N>/nrseqstate Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Indicates the number of sequencer states that are implemented.

-What: /sys/bus/coresight/devices/<memory_map>.etm/nr_resource +What: /sys/bus/coresight/devices/etm<N>/nr_resource Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Indicates the number of resource selection pairs that are available for tracing.

-What: /sys/bus/coresight/devices/<memory_map>.etm/nr_ss_cmp +What: /sys/bus/coresight/devices/etm<N>/nr_ss_cmp Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Indicates the number of single-shot comparator controls that are available for tracing.

-What: /sys/bus/coresight/devices/<memory_map>.etm/reset +What: /sys/bus/coresight/devices/etm<N>/reset Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (W) Cancels all configuration on a trace unit and set it back to its boot configuration.

-What: /sys/bus/coresight/devices/<memory_map>.etm/mode +What: /sys/bus/coresight/devices/etm<N>/mode Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org @@ -91,302 +91,349 @@ Description: (RW) Controls various modes supported by this ETM, for example P0 instruction tracing, branch broadcast, cycle counting and context ID tracing.

-What: /sys/bus/coresight/devices/<memory_map>.etm/pe +What: /sys/bus/coresight/devices/etm<N>/pe Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Controls which PE to trace.

-What: /sys/bus/coresight/devices/<memory_map>.etm/event +What: /sys/bus/coresight/devices/etm<N>/event Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Controls the tracing of arbitrary events from bank 0 to 3.

-What: /sys/bus/coresight/devices/<memory_map>.etm/event_instren +What: /sys/bus/coresight/devices/etm<N>/event_instren Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Controls the behavior of the events in bank 0 to 3.

-What: /sys/bus/coresight/devices/<memory_map>.etm/event_ts +What: /sys/bus/coresight/devices/etm<N>/event_ts Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Controls the insertion of global timestamps in the trace streams.

-What: /sys/bus/coresight/devices/<memory_map>.etm/syncfreq +What: /sys/bus/coresight/devices/etm<N>/syncfreq Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Controls how often trace synchronization requests occur.

-What: /sys/bus/coresight/devices/<memory_map>.etm/cyc_threshold +What: /sys/bus/coresight/devices/etm<N>/cyc_threshold Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Sets the threshold value for cycle counting.

-What: /sys/bus/coresight/devices/<memory_map>.etm/bb_ctrl +What: /sys/bus/coresight/devices/etm<N>/bb_ctrl Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Controls which regions in the memory map are enabled to use branch broadcasting.

-What: /sys/bus/coresight/devices/<memory_map>.etm/event_vinst +What: /sys/bus/coresight/devices/etm<N>/event_vinst Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Controls instruction trace filtering.

-What: /sys/bus/coresight/devices/<memory_map>.etm/s_exlevel_vinst +What: /sys/bus/coresight/devices/etm<N>/s_exlevel_vinst Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) In Secure state, each bit controls whether instruction tracing is enabled for the corresponding exception level.

-What: /sys/bus/coresight/devices/<memory_map>.etm/ns_exlevel_vinst +What: /sys/bus/coresight/devices/etm<N>/ns_exlevel_vinst Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) In non-secure state, each bit controls whether instruction tracing is enabled for the corresponding exception level.

-What: /sys/bus/coresight/devices/<memory_map>.etm/addr_idx +What: /sys/bus/coresight/devices/etm<N>/addr_idx Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Select which address comparator or pair (of comparators) to work with.

-What: /sys/bus/coresight/devices/<memory_map>.etm/addr_instdatatype +What: /sys/bus/coresight/devices/etm<N>/addr_instdatatype Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Controls what type of comparison the trace unit performs.

-What: /sys/bus/coresight/devices/<memory_map>.etm/addr_single +What: /sys/bus/coresight/devices/etm<N>/addr_single Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Used to setup single address comparator values.

-What: /sys/bus/coresight/devices/<memory_map>.etm/addr_range +What: /sys/bus/coresight/devices/etm<N>/addr_range Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Used to setup address range comparator values.

-What: /sys/bus/coresight/devices/<memory_map>.etm/seq_idx +What: /sys/bus/coresight/devices/etm<N>/seq_idx Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Select which sequensor.

-What: /sys/bus/coresight/devices/<memory_map>.etm/seq_state +What: /sys/bus/coresight/devices/etm<N>/seq_state Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Use this to set, or read, the sequencer state.

-What: /sys/bus/coresight/devices/<memory_map>.etm/seq_event +What: /sys/bus/coresight/devices/etm<N>/seq_event Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Moves the sequencer state to a specific state.

-What: /sys/bus/coresight/devices/<memory_map>.etm/seq_reset_event +What: /sys/bus/coresight/devices/etm<N>/seq_reset_event Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Moves the sequencer to state 0 when a programmed event occurs.

-What: /sys/bus/coresight/devices/<memory_map>.etm/cntr_idx +What: /sys/bus/coresight/devices/etm<N>/cntr_idx Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Select which counter unit to work with.

-What: /sys/bus/coresight/devices/<memory_map>.etm/cntrldvr +What: /sys/bus/coresight/devices/etm<N>/cntrldvr Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) This sets or returns the reload count value of the specific counter.

-What: /sys/bus/coresight/devices/<memory_map>.etm/cntr_val +What: /sys/bus/coresight/devices/etm<N>/cntr_val Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) This sets or returns the current count value of the specific counter.

-What: /sys/bus/coresight/devices/<memory_map>.etm/cntr_ctrl +What: /sys/bus/coresight/devices/etm<N>/cntr_ctrl Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Controls the operation of the selected counter.

-What: /sys/bus/coresight/devices/<memory_map>.etm/res_idx +What: /sys/bus/coresight/devices/etm<N>/res_idx Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Select which resource selection unit to work with.

-What: /sys/bus/coresight/devices/<memory_map>.etm/res_ctrl +What: /sys/bus/coresight/devices/etm<N>/res_ctrl Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Controls the selection of the resources in the trace unit.

-What: /sys/bus/coresight/devices/<memory_map>.etm/ctxid_idx +What: /sys/bus/coresight/devices/etm<N>/ctxid_idx Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Select which context ID comparator to work with.

-What: /sys/bus/coresight/devices/<memory_map>.etm/ctxid_pid +What: /sys/bus/coresight/devices/etm<N>/ctxid_pid Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Get/Set the context ID comparator value to trigger on.

-What: /sys/bus/coresight/devices/<memory_map>.etm/ctxid_masks +What: /sys/bus/coresight/devices/etm<N>/ctxid_masks Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Mask for all 8 context ID comparator value registers (if implemented).

-What: /sys/bus/coresight/devices/<memory_map>.etm/vmid_idx +What: /sys/bus/coresight/devices/etm<N>/vmid_idx Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Select which virtual machine ID comparator to work with.

-What: /sys/bus/coresight/devices/<memory_map>.etm/vmid_val +What: /sys/bus/coresight/devices/etm<N>/vmid_val Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Get/Set the virtual machine ID comparator value to trigger on.

-What: /sys/bus/coresight/devices/<memory_map>.etm/vmid_masks +What: /sys/bus/coresight/devices/etm<N>/vmid_masks Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Mask for all 8 virtual machine ID comparator value registers (if implemented).

-What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcoslsr +What: /sys/bus/coresight/devices/etm<N>/addr_exlevel_s_ns +Date: August 2019 +KernelVersion: 5.4 +Contact: Mathieu Poirier mathieu.poirier@linaro.org +Description: (RW) Set the Exception Level matching bits for secure and + non-secure exception levels. + +What: /sys/bus/coresight/devices/etm<N>/vinst_pe_cmp_start_stop +Date: August 2019 +KernelVersion: 5.4 +Contact: Mathieu Poirier mathieu.poirier@linaro.org +Description: (RW) Access the start stop control register for PE input + comparators. + +What: /sys/bus/coresight/devices/etm<N>/addr_cmp_view +Date: August 2019 +KernelVersion: 5.4 +Contact: Mathieu Poirier mathieu.poirier@linaro.org +Description: (R) Print the current settings for the selected address + comparator. + +What: /sys/bus/coresight/devices/etm<N>/sshot_idx +Date: August 2019 +KernelVersion: 5.4 +Contact: Mathieu Poirier mathieu.poirier@linaro.org +Description: (RW) Select the single shot control register to access. + +What: /sys/bus/coresight/devices/etm<N>/sshot_ctrl +Date: August 2019 +KernelVersion: 5.4 +Contact: Mathieu Poirier mathieu.poirier@linaro.org +Description: (RW) Access the selected single shot control register. + +What: /sys/bus/coresight/devices/etm<N>/sshot_status +Date: August 2019 +KernelVersion: 5.4 +Contact: Mathieu Poirier mathieu.poirier@linaro.org +Description: (R) Print the current value of the selected single shot + status register. + +What: /sys/bus/coresight/devices/etm<N>/sshot_pe_ctrl +Date: August 2019 +KernelVersion: 5.4 +Contact: Mathieu Poirier mathieu.poirier@linaro.org +Description: (RW) Access the selected single show PE comparator control + register. + +What: /sys/bus/coresight/devices/etm<N>/mgmt/trcoslsr Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Print the content of the OS Lock Status Register (0x304). The value it taken directly from the HW.

-What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcpdcr +What: /sys/bus/coresight/devices/etm<N>/mgmt/trcpdcr Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Print the content of the Power Down Control Register (0x310). The value is taken directly from the HW.

-What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcpdsr +What: /sys/bus/coresight/devices/etm<N>/mgmt/trcpdsr Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Print the content of the Power Down Status Register (0x314). The value is taken directly from the HW.

-What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trclsr +What: /sys/bus/coresight/devices/etm<N>/mgmt/trclsr Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Print the content of the SW Lock Status Register (0xFB4). The value is taken directly from the HW.

-What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcauthstatus +What: /sys/bus/coresight/devices/etm<N>/mgmt/trcauthstatus Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Print the content of the Authentication Status Register (0xFB8). The value is taken directly from the HW.

-What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcdevid +What: /sys/bus/coresight/devices/etm<N>/mgmt/trcdevid Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Print the content of the Device ID Register (0xFC8). The value is taken directly from the HW.

-What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcdevtype +What: /sys/bus/coresight/devices/etm<N>/mgmt/trcdevtype Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Print the content of the Device Type Register (0xFCC). The value is taken directly from the HW.

-What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcpidr0 +What: /sys/bus/coresight/devices/etm<N>/mgmt/trcpidr0 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Print the content of the Peripheral ID0 Register (0xFE0). The value is taken directly from the HW.

-What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcpidr1 +What: /sys/bus/coresight/devices/etm<N>/mgmt/trcpidr1 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Print the content of the Peripheral ID1 Register (0xFE4). The value is taken directly from the HW.

-What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcpidr2 +What: /sys/bus/coresight/devices/etm<N>/mgmt/trcpidr2 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Print the content of the Peripheral ID2 Register (0xFE8). The value is taken directly from the HW.

-What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcpidr3 +What: /sys/bus/coresight/devices/etm<N>/mgmt/trcpidr3 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Print the content of the Peripheral ID3 Register (0xFEC). The value is taken directly from the HW.

-What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcconfig +What: /sys/bus/coresight/devices/etm<N>/mgmt/trcconfig Date: February 2016 KernelVersion: 4.07 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Print the content of the trace configuration register (0x010) as currently set by SW.

-What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trctraceid +What: /sys/bus/coresight/devices/etm<N>/mgmt/trctraceid Date: February 2016 KernelVersion: 4.07 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Print the content of the trace ID register (0x040).

-What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr0 +What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr0 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Returns the tracing capabilities of the trace unit (0x1E0). The value is taken directly from the HW.

-What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr1 +What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr1 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Returns the tracing capabilities of the trace unit (0x1E4). The value is taken directly from the HW.

-What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr2 +What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr2 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org @@ -394,7 +441,7 @@ Description: (R) Returns the maximum size of the data value, data address, VMID, context ID and instuction address in the trace unit (0x1E8). The value is taken directly from the HW.

-What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr3 +What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr3 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org @@ -403,42 +450,42 @@ Description: (R) Returns the value associated with various resources architecture specification for more details (0x1E8). The value is taken directly from the HW.

-What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr4 +What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr4 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Returns how many resources the trace unit supports (0x1F0). The value is taken directly from the HW.

-What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr5 +What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr5 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Returns how many resources the trace unit supports (0x1F4). The value is taken directly from the HW.

-What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr8 +What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr8 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Returns the maximum speculation depth of the instruction trace stream. (0x180). The value is taken directly from the HW.

-What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr9 +What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr9 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Returns the number of P0 right-hand keys that the trace unit can use (0x184). The value is taken directly from the HW.

-What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr10 +What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr10 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Returns the number of P1 right-hand keys that the trace unit can use (0x188). The value is taken directly from the HW.

-What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr11 +What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr11 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org @@ -446,7 +493,7 @@ Description: (R) Returns the number of special P1 right-hand keys that the trace unit can use (0x18C). The value is taken directly from the HW.

-What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr12 +What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr12 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org @@ -454,7 +501,7 @@ Description: (R) Returns the number of conditional P1 right-hand keys that the trace unit can use (0x190). The value is taken directly from the HW.

-What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr13 +What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr13 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org

-- 2.17.1

Mathieu Poirier

3 Sep 3 Sep

7:42 p.m.

New subject: [PATCH v2 09/11] coresight: etm4x: docs: Update ABI doc for sysfs features added.

On Thu, Aug 29, 2019 at 10:33:19PM +0100, Mike Leach wrote:

...

Update document to include the new sysfs features added during this patchset.

Updated to reflect the new sysfs component nameing schema.

Signed-off-by: Mike Leach mike.leach@linaro.org

.../testing/sysfs-bus-coresight-devices-etm4x | 183 +++++++++++------- 1 file changed, 115 insertions(+), 68 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x index 36258bc1b473..112c50ae9986 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x @@ -1,4 +1,4 @@ -What: /sys/bus/coresight/devices/<memory_map>.etm/enable_source +What: /sys/bus/coresight/devices/etm<N>/enable_source Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org @@ -8,82 +8,82 @@ Description: (RW) Enable/disable tracing on this specific trace entiry. of coresight components linking the source to the sink is configured and managed automatically by the coresight framework. -What: /sys/bus/coresight/devices/<memory_map>.etm/cpu +What: /sys/bus/coresight/devices/etm<N>/cpu Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) The CPU this tracing entity is associated with. -What: /sys/bus/coresight/devices/<memory_map>.etm/nr_pe_cmp +What: /sys/bus/coresight/devices/etm<N>/nr_pe_cmp Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Indicates the number of PE comparator inputs that are available for tracing. -What: /sys/bus/coresight/devices/<memory_map>.etm/nr_addr_cmp +What: /sys/bus/coresight/devices/etm<N>/nr_addr_cmp Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Indicates the number of address comparator pairs that are available for tracing. -What: /sys/bus/coresight/devices/<memory_map>.etm/nr_cntr +What: /sys/bus/coresight/devices/etm<N>/nr_cntr Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Indicates the number of counters that are available for tracing. -What: /sys/bus/coresight/devices/<memory_map>.etm/nr_ext_inp +What: /sys/bus/coresight/devices/etm<N>/nr_ext_inp Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Indicates how many external inputs are implemented. -What: /sys/bus/coresight/devices/<memory_map>.etm/numcidc +What: /sys/bus/coresight/devices/etm<N>/numcidc Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Indicates the number of Context ID comparators that are available for tracing. -What: /sys/bus/coresight/devices/<memory_map>.etm/numvmidc +What: /sys/bus/coresight/devices/etm<N>/numvmidc Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Indicates the number of VMID comparators that are available for tracing. -What: /sys/bus/coresight/devices/<memory_map>.etm/nrseqstate +What: /sys/bus/coresight/devices/etm<N>/nrseqstate Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Indicates the number of sequencer states that are implemented. -What: /sys/bus/coresight/devices/<memory_map>.etm/nr_resource +What: /sys/bus/coresight/devices/etm<N>/nr_resource Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Indicates the number of resource selection pairs that are available for tracing. -What: /sys/bus/coresight/devices/<memory_map>.etm/nr_ss_cmp +What: /sys/bus/coresight/devices/etm<N>/nr_ss_cmp Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Indicates the number of single-shot comparator controls that are available for tracing. -What: /sys/bus/coresight/devices/<memory_map>.etm/reset +What: /sys/bus/coresight/devices/etm<N>/reset Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (W) Cancels all configuration on a trace unit and set it back to its boot configuration. -What: /sys/bus/coresight/devices/<memory_map>.etm/mode +What: /sys/bus/coresight/devices/etm<N>/mode Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org @@ -91,302 +91,349 @@ Description: (RW) Controls various modes supported by this ETM, for example P0 instruction tracing, branch broadcast, cycle counting and context ID tracing. -What: /sys/bus/coresight/devices/<memory_map>.etm/pe +What: /sys/bus/coresight/devices/etm<N>/pe Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Controls which PE to trace. -What: /sys/bus/coresight/devices/<memory_map>.etm/event +What: /sys/bus/coresight/devices/etm<N>/event Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Controls the tracing of arbitrary events from bank 0 to 3. -What: /sys/bus/coresight/devices/<memory_map>.etm/event_instren +What: /sys/bus/coresight/devices/etm<N>/event_instren Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Controls the behavior of the events in bank 0 to 3. -What: /sys/bus/coresight/devices/<memory_map>.etm/event_ts +What: /sys/bus/coresight/devices/etm<N>/event_ts Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Controls the insertion of global timestamps in the trace streams. -What: /sys/bus/coresight/devices/<memory_map>.etm/syncfreq +What: /sys/bus/coresight/devices/etm<N>/syncfreq Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Controls how often trace synchronization requests occur. -What: /sys/bus/coresight/devices/<memory_map>.etm/cyc_threshold +What: /sys/bus/coresight/devices/etm<N>/cyc_threshold Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Sets the threshold value for cycle counting. -What: /sys/bus/coresight/devices/<memory_map>.etm/bb_ctrl +What: /sys/bus/coresight/devices/etm<N>/bb_ctrl Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Controls which regions in the memory map are enabled to use branch broadcasting. -What: /sys/bus/coresight/devices/<memory_map>.etm/event_vinst +What: /sys/bus/coresight/devices/etm<N>/event_vinst Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Controls instruction trace filtering. -What: /sys/bus/coresight/devices/<memory_map>.etm/s_exlevel_vinst +What: /sys/bus/coresight/devices/etm<N>/s_exlevel_vinst Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) In Secure state, each bit controls whether instruction tracing is enabled for the corresponding exception level. -What: /sys/bus/coresight/devices/<memory_map>.etm/ns_exlevel_vinst +What: /sys/bus/coresight/devices/etm<N>/ns_exlevel_vinst Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) In non-secure state, each bit controls whether instruction tracing is enabled for the corresponding exception level. -What: /sys/bus/coresight/devices/<memory_map>.etm/addr_idx +What: /sys/bus/coresight/devices/etm<N>/addr_idx Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Select which address comparator or pair (of comparators) to work with. -What: /sys/bus/coresight/devices/<memory_map>.etm/addr_instdatatype +What: /sys/bus/coresight/devices/etm<N>/addr_instdatatype Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Controls what type of comparison the trace unit performs. -What: /sys/bus/coresight/devices/<memory_map>.etm/addr_single +What: /sys/bus/coresight/devices/etm<N>/addr_single Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Used to setup single address comparator values. -What: /sys/bus/coresight/devices/<memory_map>.etm/addr_range +What: /sys/bus/coresight/devices/etm<N>/addr_range Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Used to setup address range comparator values. -What: /sys/bus/coresight/devices/<memory_map>.etm/seq_idx +What: /sys/bus/coresight/devices/etm<N>/seq_idx Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Select which sequensor. -What: /sys/bus/coresight/devices/<memory_map>.etm/seq_state +What: /sys/bus/coresight/devices/etm<N>/seq_state Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Use this to set, or read, the sequencer state. -What: /sys/bus/coresight/devices/<memory_map>.etm/seq_event +What: /sys/bus/coresight/devices/etm<N>/seq_event Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Moves the sequencer state to a specific state. -What: /sys/bus/coresight/devices/<memory_map>.etm/seq_reset_event +What: /sys/bus/coresight/devices/etm<N>/seq_reset_event Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Moves the sequencer to state 0 when a programmed event occurs. -What: /sys/bus/coresight/devices/<memory_map>.etm/cntr_idx +What: /sys/bus/coresight/devices/etm<N>/cntr_idx Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Select which counter unit to work with. -What: /sys/bus/coresight/devices/<memory_map>.etm/cntrldvr +What: /sys/bus/coresight/devices/etm<N>/cntrldvr Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) This sets or returns the reload count value of the specific counter. -What: /sys/bus/coresight/devices/<memory_map>.etm/cntr_val +What: /sys/bus/coresight/devices/etm<N>/cntr_val Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) This sets or returns the current count value of the specific counter. -What: /sys/bus/coresight/devices/<memory_map>.etm/cntr_ctrl +What: /sys/bus/coresight/devices/etm<N>/cntr_ctrl Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Controls the operation of the selected counter. -What: /sys/bus/coresight/devices/<memory_map>.etm/res_idx +What: /sys/bus/coresight/devices/etm<N>/res_idx Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Select which resource selection unit to work with. -What: /sys/bus/coresight/devices/<memory_map>.etm/res_ctrl +What: /sys/bus/coresight/devices/etm<N>/res_ctrl Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Controls the selection of the resources in the trace unit. -What: /sys/bus/coresight/devices/<memory_map>.etm/ctxid_idx +What: /sys/bus/coresight/devices/etm<N>/ctxid_idx Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Select which context ID comparator to work with. -What: /sys/bus/coresight/devices/<memory_map>.etm/ctxid_pid +What: /sys/bus/coresight/devices/etm<N>/ctxid_pid Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Get/Set the context ID comparator value to trigger on. -What: /sys/bus/coresight/devices/<memory_map>.etm/ctxid_masks +What: /sys/bus/coresight/devices/etm<N>/ctxid_masks Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Mask for all 8 context ID comparator value registers (if implemented). -What: /sys/bus/coresight/devices/<memory_map>.etm/vmid_idx +What: /sys/bus/coresight/devices/etm<N>/vmid_idx Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Select which virtual machine ID comparator to work with. -What: /sys/bus/coresight/devices/<memory_map>.etm/vmid_val +What: /sys/bus/coresight/devices/etm<N>/vmid_val Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Get/Set the virtual machine ID comparator value to trigger on. -What: /sys/bus/coresight/devices/<memory_map>.etm/vmid_masks +What: /sys/bus/coresight/devices/etm<N>/vmid_masks Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (RW) Mask for all 8 virtual machine ID comparator value registers (if implemented). -What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcoslsr +What: /sys/bus/coresight/devices/etm<N>/addr_exlevel_s_ns +Date: August 2019 +KernelVersion: 5.4 +Contact: Mathieu Poirier mathieu.poirier@linaro.org +Description: (RW) Set the Exception Level matching bits for secure and
non-secure exception levels.
+What: /sys/bus/coresight/devices/etm<N>/vinst_pe_cmp_start_stop +Date: August 2019 +KernelVersion: 5.4 +Contact: Mathieu Poirier mathieu.poirier@linaro.org +Description: (RW) Access the start stop control register for PE input
comparators.
+What: /sys/bus/coresight/devices/etm<N>/addr_cmp_view +Date: August 2019 +KernelVersion: 5.4 +Contact: Mathieu Poirier mathieu.poirier@linaro.org +Description: (R) Print the current settings for the selected address
comparator.
+What: /sys/bus/coresight/devices/etm<N>/sshot_idx +Date: August 2019 +KernelVersion: 5.4 +Contact: Mathieu Poirier mathieu.poirier@linaro.org +Description: (RW) Select the single shot control register to access.

+What: /sys/bus/coresight/devices/etm<N>/sshot_ctrl +Date: August 2019 +KernelVersion: 5.4 +Contact: Mathieu Poirier mathieu.poirier@linaro.org +Description: (RW) Access the selected single shot control register.

+What: /sys/bus/coresight/devices/etm<N>/sshot_status +Date: August 2019 +KernelVersion: 5.4 +Contact: Mathieu Poirier mathieu.poirier@linaro.org +Description: (R) Print the current value of the selected single shot
status register.
+What: /sys/bus/coresight/devices/etm<N>/sshot_pe_ctrl +Date: August 2019 +KernelVersion: 5.4 +Contact: Mathieu Poirier mathieu.poirier@linaro.org +Description: (RW) Access the selected single show PE comparator control
register.

I didn't notice this in the first round - please split further. So one patch to address the etm<N> and another for adding new features.

For patches 1, 3, 4 and 8:

Reviewed-by: Mathieu Poirier mathieu.poirier@linaro.org

...

+What: /sys/bus/coresight/devices/etm<N>/mgmt/trcoslsr Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Print the content of the OS Lock Status Register (0x304). The value it taken directly from the HW. -What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcpdcr +What: /sys/bus/coresight/devices/etm<N>/mgmt/trcpdcr Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Print the content of the Power Down Control Register (0x310). The value is taken directly from the HW. -What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcpdsr +What: /sys/bus/coresight/devices/etm<N>/mgmt/trcpdsr Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Print the content of the Power Down Status Register (0x314). The value is taken directly from the HW. -What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trclsr +What: /sys/bus/coresight/devices/etm<N>/mgmt/trclsr Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Print the content of the SW Lock Status Register (0xFB4). The value is taken directly from the HW. -What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcauthstatus +What: /sys/bus/coresight/devices/etm<N>/mgmt/trcauthstatus Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Print the content of the Authentication Status Register (0xFB8). The value is taken directly from the HW. -What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcdevid +What: /sys/bus/coresight/devices/etm<N>/mgmt/trcdevid Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Print the content of the Device ID Register (0xFC8). The value is taken directly from the HW. -What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcdevtype +What: /sys/bus/coresight/devices/etm<N>/mgmt/trcdevtype Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Print the content of the Device Type Register (0xFCC). The value is taken directly from the HW. -What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcpidr0 +What: /sys/bus/coresight/devices/etm<N>/mgmt/trcpidr0 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Print the content of the Peripheral ID0 Register (0xFE0). The value is taken directly from the HW. -What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcpidr1 +What: /sys/bus/coresight/devices/etm<N>/mgmt/trcpidr1 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Print the content of the Peripheral ID1 Register (0xFE4). The value is taken directly from the HW. -What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcpidr2 +What: /sys/bus/coresight/devices/etm<N>/mgmt/trcpidr2 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Print the content of the Peripheral ID2 Register (0xFE8). The value is taken directly from the HW. -What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcpidr3 +What: /sys/bus/coresight/devices/etm<N>/mgmt/trcpidr3 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Print the content of the Peripheral ID3 Register (0xFEC). The value is taken directly from the HW. -What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcconfig +What: /sys/bus/coresight/devices/etm<N>/mgmt/trcconfig Date: February 2016 KernelVersion: 4.07 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Print the content of the trace configuration register (0x010) as currently set by SW. -What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trctraceid +What: /sys/bus/coresight/devices/etm<N>/mgmt/trctraceid Date: February 2016 KernelVersion: 4.07 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Print the content of the trace ID register (0x040). -What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr0 +What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr0 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Returns the tracing capabilities of the trace unit (0x1E0). The value is taken directly from the HW. -What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr1 +What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr1 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Returns the tracing capabilities of the trace unit (0x1E4). The value is taken directly from the HW. -What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr2 +What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr2 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org @@ -394,7 +441,7 @@ Description: (R) Returns the maximum size of the data value, data address, VMID, context ID and instuction address in the trace unit (0x1E8). The value is taken directly from the HW. -What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr3 +What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr3 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org @@ -403,42 +450,42 @@ Description: (R) Returns the value associated with various resources architecture specification for more details (0x1E8). The value is taken directly from the HW. -What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr4 +What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr4 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Returns how many resources the trace unit supports (0x1F0). The value is taken directly from the HW. -What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr5 +What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr5 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Returns how many resources the trace unit supports (0x1F4). The value is taken directly from the HW. -What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr8 +What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr8 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Returns the maximum speculation depth of the instruction trace stream. (0x180). The value is taken directly from the HW. -What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr9 +What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr9 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Returns the number of P0 right-hand keys that the trace unit can use (0x184). The value is taken directly from the HW. -What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr10 +What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr10 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org Description: (R) Returns the number of P1 right-hand keys that the trace unit can use (0x188). The value is taken directly from the HW. -What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr11 +What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr11 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org @@ -446,7 +493,7 @@ Description: (R) Returns the number of special P1 right-hand keys that the trace unit can use (0x18C). The value is taken directly from the HW. -What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr12 +What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr12 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org @@ -454,7 +501,7 @@ Description: (R) Returns the number of conditional P1 right-hand keys that the trace unit can use (0x190). The value is taken directly from the HW. -What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr13 +What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr13 Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier mathieu.poirier@linaro.org -- 2.17.1

Greg KH

7:59 p.m.

New subject: [PATCH v2 09/11] coresight: etm4x: docs: Update ABI doc for sysfs features added.

On Thu, Aug 29, 2019 at 10:33:19PM +0100, Mike Leach wrote:

...

Update document to include the new sysfs features added during this patchset.

Updated to reflect the new sysfs component nameing schema.

Signed-off-by: Mike Leach mike.leach@linaro.org

.../testing/sysfs-bus-coresight-devices-etm4x | 183 +++++++++++------- 1 file changed, 115 insertions(+), 68 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x index 36258bc1b473..112c50ae9986 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x @@ -1,4 +1,4 @@ -What: /sys/bus/coresight/devices/<memory_map>.etm/enable_source +What: /sys/bus/coresight/devices/etm<N>/enable_source

You are renaming sysfs directories that have been around since:

...

Date: April 2015

???

Really?

That's brave.

What tool did you just break?

greg k-h

Mathieu Poirier

10:51 p.m.

New subject: [PATCH v2 09/11] coresight: etm4x: docs: Update ABI doc for sysfs features added.

On Tue, 3 Sep 2019 at 13:59, Greg KH gregkh@linuxfoundation.org wrote:

...

On Thu, Aug 29, 2019 at 10:33:19PM +0100, Mike Leach wrote:

...
Update document to include the new sysfs features added during this patchset.

Updated to reflect the new sysfs component nameing schema.

Signed-off-by: Mike Leach mike.leach@linaro.org

.../testing/sysfs-bus-coresight-devices-etm4x | 183 +++++++++++------- 1 file changed, 115 insertions(+), 68 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x index 36258bc1b473..112c50ae9986 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x @@ -1,4 +1,4 @@ -What: /sys/bus/coresight/devices/<memory_map>.etm/enable_source +What: /sys/bus/coresight/devices/etm<N>/enable_source

You are renaming sysfs directories that have been around since:

...
Date: April 2015

???

Really?

That's brave.

When I worked on the coresight sysfs ABI a while back I specifically added it at the "testing" level as I was well aware that things could change in the future. According to the guidelines in the documentation userspace can rely on it which was accurate since the interface didn't change for 4 years. But the guidelines also mention that changes can occur before the interfaces are move to stables, and that programs are encouraged to manifest their interest by adding their name to the "users" field.

The interface was changed in 5.2 to support coresight from ACPI and make things easier to understand for users. It is a lot more intuitive to associate an ETM tracer with the CPU it belongs to by referring to the CPU number than the memory mapped address. Given the "testing" status of the interface and the absence of registered users I decided to move forward with the change. If "testing" is too strict for that I suggest to add an "experimental" category where it would be more acceptable to change things as subsystems mature.

Thanks, Mathieu

...

What tool did you just break?

greg k-h

Greg KH

4 Sep 4 Sep

5:48 a.m.

New subject: [PATCH v2 09/11] coresight: etm4x: docs: Update ABI doc for sysfs features added.

On Tue, Sep 03, 2019 at 04:51:40PM -0600, Mathieu Poirier wrote:

...

On Tue, 3 Sep 2019 at 13:59, Greg KH gregkh@linuxfoundation.org wrote:

...
On Thu, Aug 29, 2019 at 10:33:19PM +0100, Mike Leach wrote:

...
Update document to include the new sysfs features added during this patchset.

Updated to reflect the new sysfs component nameing schema.

Signed-off-by: Mike Leach mike.leach@linaro.org

.../testing/sysfs-bus-coresight-devices-etm4x | 183 +++++++++++------- 1 file changed, 115 insertions(+), 68 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x index 36258bc1b473..112c50ae9986 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x @@ -1,4 +1,4 @@ -What: /sys/bus/coresight/devices/<memory_map>.etm/enable_source +What: /sys/bus/coresight/devices/etm<N>/enable_source

You are renaming sysfs directories that have been around since:

...
Date: April 2015

???

Really?

That's brave.

When I worked on the coresight sysfs ABI a while back I specifically added it at the "testing" level as I was well aware that things could change in the future. According to the guidelines in the documentation userspace can rely on it which was accurate since the interface didn't change for 4 years. But the guidelines also mention that changes can occur before the interfaces are move to stables, and that programs are encouraged to manifest their interest by adding their name to the "users" field.

The interface was changed in 5.2 to support coresight from ACPI and make things easier to understand for users. It is a lot more intuitive to associate an ETM tracer with the CPU it belongs to by referring to the CPU number than the memory mapped address. Given the "testing" status of the interface and the absence of registered users I decided to move forward with the change. If "testing" is too strict for that I suggest to add an "experimental" category where it would be more acceptable to change things as subsystems mature.

"testing" is not really "testing" if you have userspace tools/programs assuming the location and contents of specific files in sysfs.

You can change things in sysfs by creating new files, but to do wholesale renaming like you did here can be very dangerous as you might be breaking things. Usually new files are created, not existing ones moved.

What tools use these today? What is going to break?

thanks, greg k-h

Mathieu Poirier

4:05 p.m.

New subject: [PATCH v2 09/11] coresight: etm4x: docs: Update ABI doc for sysfs features added.

On Tue, 3 Sep 2019 at 23:48, Greg KH gregkh@linuxfoundation.org wrote:

...

On Tue, Sep 03, 2019 at 04:51:40PM -0600, Mathieu Poirier wrote:

...
On Tue, 3 Sep 2019 at 13:59, Greg KH gregkh@linuxfoundation.org wrote:

...
On Thu, Aug 29, 2019 at 10:33:19PM +0100, Mike Leach wrote:

...
Update document to include the new sysfs features added during this patchset.

Updated to reflect the new sysfs component nameing schema.

Signed-off-by: Mike Leach mike.leach@linaro.org

.../testing/sysfs-bus-coresight-devices-etm4x | 183 +++++++++++------- 1 file changed, 115 insertions(+), 68 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x index 36258bc1b473..112c50ae9986 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x @@ -1,4 +1,4 @@ -What: /sys/bus/coresight/devices/<memory_map>.etm/enable_source +What: /sys/bus/coresight/devices/etm<N>/enable_source

You are renaming sysfs directories that have been around since:

...
Date: April 2015

???

Really?

That's brave.

When I worked on the coresight sysfs ABI a while back I specifically added it at the "testing" level as I was well aware that things could change in the future. According to the guidelines in the documentation userspace can rely on it which was accurate since the interface didn't change for 4 years. But the guidelines also mention that changes can occur before the interfaces are move to stables, and that programs are encouraged to manifest their interest by adding their name to the "users" field.

The interface was changed in 5.2 to support coresight from ACPI and make things easier to understand for users. It is a lot more intuitive to associate an ETM tracer with the CPU it belongs to by referring to the CPU number than the memory mapped address. Given the "testing" status of the interface and the absence of registered users I decided to move forward with the change. If "testing" is too strict for that I suggest to add an "experimental" category where it would be more acceptable to change things as subsystems mature.

"testing" is not really "testing" if you have userspace tools/programs assuming the location and contents of specific files in sysfs.

You can change things in sysfs by creating new files, but to do wholesale renaming like you did here can be very dangerous as you might be breaking things.

Yes, something I have definitely considered.

...

Usually new files are created, not existing ones moved.

In this case it would have meant a new symbolic link for every coresight device, so twice a many entries under $(SYS)/bus/coresight/device/. That would have been a lot of clutter and an increasing source of problems as the number of CPU and sinks increases. To me, and given the permissive definition of "testing" found in the documentation, a clean break was a better option.

...

What tools use these today? What is going to break?

Other than local shell scripts I am not aware of any tools using these today. I am certainly open to discuss a better alternative but right now, I just don't see one.

...

thanks, greg k-h

Greg KH

4:17 p.m.

New subject: [PATCH v2 09/11] coresight: etm4x: docs: Update ABI doc for sysfs features added.

On Wed, Sep 04, 2019 at 10:05:51AM -0600, Mathieu Poirier wrote:

...

On Tue, 3 Sep 2019 at 23:48, Greg KH gregkh@linuxfoundation.org wrote:

...
On Tue, Sep 03, 2019 at 04:51:40PM -0600, Mathieu Poirier wrote:

...
On Tue, 3 Sep 2019 at 13:59, Greg KH gregkh@linuxfoundation.org wrote:

...
On Thu, Aug 29, 2019 at 10:33:19PM +0100, Mike Leach wrote:

...
Update document to include the new sysfs features added during this patchset.

Updated to reflect the new sysfs component nameing schema.

Signed-off-by: Mike Leach mike.leach@linaro.org

.../testing/sysfs-bus-coresight-devices-etm4x | 183 +++++++++++------- 1 file changed, 115 insertions(+), 68 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x index 36258bc1b473..112c50ae9986 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x @@ -1,4 +1,4 @@ -What: /sys/bus/coresight/devices/<memory_map>.etm/enable_source +What: /sys/bus/coresight/devices/etm<N>/enable_source

You are renaming sysfs directories that have been around since:

...
Date: April 2015

???

Really?

That's brave.

When I worked on the coresight sysfs ABI a while back I specifically added it at the "testing" level as I was well aware that things could change in the future. According to the guidelines in the documentation userspace can rely on it which was accurate since the interface didn't change for 4 years. But the guidelines also mention that changes can occur before the interfaces are move to stables, and that programs are encouraged to manifest their interest by adding their name to the "users" field.

The interface was changed in 5.2 to support coresight from ACPI and make things easier to understand for users. It is a lot more intuitive to associate an ETM tracer with the CPU it belongs to by referring to the CPU number than the memory mapped address. Given the "testing" status of the interface and the absence of registered users I decided to move forward with the change. If "testing" is too strict for that I suggest to add an "experimental" category where it would be more acceptable to change things as subsystems mature.

"testing" is not really "testing" if you have userspace tools/programs assuming the location and contents of specific files in sysfs.

You can change things in sysfs by creating new files, but to do wholesale renaming like you did here can be very dangerous as you might be breaking things.

Yes, something I have definitely considered.

...
Usually new files are created, not existing ones moved.

In this case it would have meant a new symbolic link for every coresight device, so twice a many entries under $(SYS)/bus/coresight/device/. That would have been a lot of clutter and an increasing source of problems as the number of CPU and sinks increases. To me, and given the permissive definition of "testing" found in the documentation, a clean break was a better option.

Well, "testing" doesn't really matter in the end, if a tool/user relies on it, we have to keep it working properly.

...

...
What tools use these today? What is going to break?

Other than local shell scripts I am not aware of any tools using these today. I am certainly open to discuss a better alternative but right now, I just don't see one.

Be aware that you might have to change this back if there is any objections.

thanks,

greg k-h

Mathieu Poirier

7:47 p.m.

New subject: [PATCH v2 09/11] coresight: etm4x: docs: Update ABI doc for sysfs features added.

On Wed, 4 Sep 2019 at 10:17, Greg KH gregkh@linuxfoundation.org wrote:

...

On Wed, Sep 04, 2019 at 10:05:51AM -0600, Mathieu Poirier wrote:

...
On Tue, 3 Sep 2019 at 23:48, Greg KH gregkh@linuxfoundation.org wrote:

...
On Tue, Sep 03, 2019 at 04:51:40PM -0600, Mathieu Poirier wrote:

...
On Tue, 3 Sep 2019 at 13:59, Greg KH gregkh@linuxfoundation.org wrote:

...
On Thu, Aug 29, 2019 at 10:33:19PM +0100, Mike Leach wrote:

...
Update document to include the new sysfs features added during this patchset.

Updated to reflect the new sysfs component nameing schema.

Signed-off-by: Mike Leach mike.leach@linaro.org

.../testing/sysfs-bus-coresight-devices-etm4x | 183 +++++++++++------- 1 file changed, 115 insertions(+), 68 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x index 36258bc1b473..112c50ae9986 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x @@ -1,4 +1,4 @@ -What: /sys/bus/coresight/devices/<memory_map>.etm/enable_source +What: /sys/bus/coresight/devices/etm<N>/enable_source

You are renaming sysfs directories that have been around since:

...
Date: April 2015

???

Really?

That's brave.

When I worked on the coresight sysfs ABI a while back I specifically added it at the "testing" level as I was well aware that things could change in the future. According to the guidelines in the documentation userspace can rely on it which was accurate since the interface didn't change for 4 years. But the guidelines also mention that changes can occur before the interfaces are move to stables, and that programs are encouraged to manifest their interest by adding their name to the "users" field.

The interface was changed in 5.2 to support coresight from ACPI and make things easier to understand for users. It is a lot more intuitive to associate an ETM tracer with the CPU it belongs to by referring to the CPU number than the memory mapped address. Given the "testing" status of the interface and the absence of registered users I decided to move forward with the change. If "testing" is too strict for that I suggest to add an "experimental" category where it would be more acceptable to change things as subsystems mature.

"testing" is not really "testing" if you have userspace tools/programs assuming the location and contents of specific files in sysfs.

You can change things in sysfs by creating new files, but to do wholesale renaming like you did here can be very dangerous as you might be breaking things.

Yes, something I have definitely considered.

...
Usually new files are created, not existing ones moved.

In this case it would have meant a new symbolic link for every coresight device, so twice a many entries under $(SYS)/bus/coresight/device/. That would have been a lot of clutter and an increasing source of problems as the number of CPU and sinks increases. To me, and given the permissive definition of "testing" found in the documentation, a clean break was a better option.

Well, "testing" doesn't really matter in the end, if a tool/user relies on it, we have to keep it working properly.

...
...
What tools use these today? What is going to break?

Other than local shell scripts I am not aware of any tools using these today. I am certainly open to discuss a better alternative but right now, I just don't see one.

Be aware that you might have to change this back if there is any objections.

We have an agreement.

Regards, Mathieu

Mike Leach

29 Aug 29 Aug

9:33 p.m.

New subject: [PATCH v2 10/11] coresight: docs: Create common sub-directory for coresight trace.

There are two files in the Documentation/trace directory relating to coresight, with more to follow, so create a Documentation/trace/coresight directory and move existing files there. Update MAINTAINERS to reference this sub-directory rather than the individual files.

Signed-off-by: Mike Leach mike.leach@linaro.org --- Documentation/trace/{ => coresight}/coresight-cpu-debug.txt | 0 Documentation/trace/{ => coresight}/coresight.txt | 0 MAINTAINERS | 3 +-- 3 files changed, 1 insertion(+), 2 deletions(-) rename Documentation/trace/{ => coresight}/coresight-cpu-debug.txt (100%) rename Documentation/trace/{ => coresight}/coresight.txt (100%)

diff --git a/Documentation/trace/coresight-cpu-debug.txt b/Documentation/trace/coresight/coresight-cpu-debug.txt similarity index 100% rename from Documentation/trace/coresight-cpu-debug.txt rename to Documentation/trace/coresight/coresight-cpu-debug.txt diff --git a/Documentation/trace/coresight.txt b/Documentation/trace/coresight/coresight.txt similarity index 100% rename from Documentation/trace/coresight.txt rename to Documentation/trace/coresight/coresight.txt diff --git a/MAINTAINERS b/MAINTAINERS index 783569e3c4b4..777b77fde29b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1582,8 +1582,7 @@ R: Suzuki K Poulose suzuki.poulose@arm.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: drivers/hwtracing/coresight/* -F: Documentation/trace/coresight.txt -F: Documentation/trace/coresight-cpu-debug.txt +F: Documentation/trace/coresight/* F: Documentation/devicetree/bindings/arm/coresight.txt F: Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt F: Documentation/ABI/testing/sysfs-bus-coresight-devices-*

-- 2.17.1

Mike Leach

9:33 p.m.

New subject: [PATCH v2 11/11] coresight: etm4x: docs: Adds detailed document for programming etm4x.

Add in detailed programmers reference for users wanting to program the CoreSight ETM 4.x driver using sysfs.

Signed-off-by: Mike Leach mike.leach@linaro.org --- .../coresight/coresight-etm4x-reference.txt | 458 ++++++++++++++++++ 1 file changed, 458 insertions(+) create mode 100644 Documentation/trace/coresight/coresight-etm4x-reference.txt

diff --git a/Documentation/trace/coresight/coresight-etm4x-reference.txt b/Documentation/trace/coresight/coresight-etm4x-reference.txt new file mode 100644 index 000000000000..f0c370870992 --- /dev/null +++ b/Documentation/trace/coresight/coresight-etm4x-reference.txt @@ -0,0 +1,458 @@ +ETMv4 sysfs linux driver programming reference - v2. +==================================================== + +Supplement to existing ETMv4 driver documentation. + +Sysfs files and directories +--------------------------- + +Root: /sys/bus/coresight/devices/etm<N> + + +The following paragraphs explain the association between sysfs files and the +ETMv4 registers that they effect. Note the register names are given without +the ‘TRC’ prefix. + +File : mode (rw) +Trace Registers : {CONFIGR + others} +Notes : Bit select trace features. See ‘mode’ section below. Bits + in this will cause equivalent programming of trace config and + other registers to enable the features requested. +Syntax & eg : 'echo bitfield > mode' + bitfield up to 32 bits setting trace features. +Example : $> echo 0x > mode + +File : reset (wo) +Trace Registers : All +Notes : Reset all programming to trace nothing / no logic programmed. +Syntax : 'echo 1 > reset' + +File : enable_source (wo) +Trace Registers : PRGCTLR, All hardware regs. +Notes : >0: Programs up the hardware with the current values held in + the driver and enables trace. + 0: disable trace hardware. +Syntax : 'echo 1 > enable_source' + +File : cpu (ro) +Trace Registers : None. +Notes : CPU ID that this ETM is attached to. +Example :$> cat cpu + $> 0 + +File : addr_idx (rw) +Trace Registers : None. +Notes : Virtual register to index address comparator and range + features. Set index for first of the pair in a range. +Syntax : 'echo idx > addr_idx' + Where idx < nr_addr_cmp x 2 + +File : addr_range (rw) +Trace Registers : ACVR[idx, idx+1], VIIECTLR +Notes : Pair of addresses for a range selected by addr_idx. Include + / exclude according to the optional parameter, or if omitted + uses the current ‘mode’ setting. Select comparator range in + control register. Error if index is odd value. +Depends : mode, addr_idx +Syntax : 'echo addr1 addr2 [exclude] > addr_range' + Where addr1 and addr2 define the range and addr1 < addr2. + Optional exclude value - 0 for include, 1 for exclude. +Example : $> echo 0x0000 0x2000 0 > addr_range + +File : addr_single (rw) +Trace Registers : ACVR[idx] +Notes : Set a single address comparator according to addr_idx. This + is used if the address comparator is used as part of event + generation logic etc. +Depends : addr_idx +Syntax : 'echo addr1 > addr_single' + +File : addr_start (rw) +Trace Registers : ACVR[idx], VISSCTLR +Notes : Set a trace start address comparator according to addr_idx. + Select comparator in control register. +Depends : addr_idx +Syntax : 'echo addr1 > addr_start' + +File : addr_stop (rw) +Trace Registers : ACVR[idx], VISSCTLR +Notes : Set a trace stop address comparator according to addr_idx. + Select comparator in control register. +Depends : addr_idx +Syntax : 'echo addr1 > addr_stop' + +File : addr_context (rw) +Trace Registers : ACATR[idx,{6:4}] +Notes : Link context ID comparator to address comparator addr_idx +Depends : addr_idx. +Syntax : 'echo ctxt_idx > addr_context' + Where ctxt_idx is the index of the linked context id / vmid + comparator. + +File : addr_ctxtype (rw) +Trace Registers : ACATR[idx,{3:2}] +Notes : Input value string. Set type for linked context ID comparator +Depends : addr_idx +Syntax : 'echo type > addr_ctxtype' + Type one of {all, vmid, ctxid, none} +Example : $> echo ctxid > addr_ctxtype + +File : addr_exlevel_s_ns (rw) +Trace Registers : ACATR[idx,{14:8}] +Notes : Set the ELx secure and non-secure matching bits for the + selected address comparator +Depends : addr_idx +Syntax : 'echo val > addr_exlevel_s_ns' + val is a 7 bit value for exception levels to exclude. Input + value shifted to correct bits in register. +Example : $> echo 0x4F > addr_exlevel_s_ns + +File : addr_instdatatype (rw) +Trace Registers : ACATR[idx,{1:0}] +Notes : Set the comparator address type for matching. Driver only + supports setting instruction address type. +Depends : addr_idx + +File : addr_cmp_view (ro) +Trace Registers : ACVR[idx, idx+1], ACATR[idx], VIIECTLR +Notes : Read the currently selected address comparator. If part of + address range then display both addresses. +Depends : addr_idx +Syntax : 'cat addr_cmp_view' +Example : $> cat addr_cmp_view + addr_cmp[0] range 0x0 0xffffffffffffffff include ctrl(0x4b00) + +File : nr_addr_cmp (ro) +Trace Registers : From IDR4 +Notes : Number of address comparator pairs + +File : sshot_idx (rw) +Trace Registers : None +Notes : Select single shot register set. + +File : sshot_ctrl (rw) +Trace Registers : SSCCR[idx] +Notes : Access a single shot comparator control register. +Depends : sshot_idx +Syntax : 'echo val > sshot_ctrl' + Writes val into the selected control register. + +File : sshot_status (ro) +Trace Registers : SSCSR[idx] +Notes : Read a single shot comparator status register +Depends : sshot_idx +Syntax : 'cat sshot_status' + Read status. +Example : $> cat sshot_status + 0x1 + +File : sshot_pe_ctrl (rw) +Trace Registers : SSPCICR[idx] +Notes : Access a single shot PE comparator input control register. +Depends : sshot_idx +Syntax : echo val > sshot_pe_ctrl + Writes val into the selected control register. + +File : ns_exlevel_vinst (rw) +Trace Registers : VICTLR{23:20} +Notes : Program non-secure exception level filters. Set / clear NS + exception filter bits. Setting ‘1’ excludes trace from the + exception level. +Syntax : 'echo bitfield > ns_exlevel_viinst' + Where bitfield contains bits to set clear for EL0 to EL2 +Example : %> echo 0x4 > ns_exlevel_viinst + ; Exclude EL2 NS trace. + +File : vinst_pe_cmp_start_stop (rw) +Trace Registers : VIPCSSCTLR +Notes : Access PE start stop comparator input control registers + +File : bb_ctrl (rw) +Trace Registers : BBCTLR +Notes : Define ranges that Branch Broadcast will operate in. + Default (0x0) is all addresses. +Depends : BB enabled. + +File : cyc_threshold (rw) +Trace Registers : CCCTLR +Notes : Set the threshold for which cycle counts will be emitted. + Error if attempt to set below minimum defined in IDR3, masked + to width of valid bits. +Depends : CC enabled. + +File : syncfreq (rw) +Trace Registers : SYNCPR +Notes : Set trace synchronisation period. Power of 2 value, 0 (off) + or 8-20. Driver defaults to 12 (every 4096 bytes). + +File : cntr_idx (rw) +Trace Registers : none +Notes : Select the counter to access +Syntax : 'echo idx > cntr_idx' + Where idx < nr_cntr + +File : cntr_ctrl (rw) +Trace Registers : CNTCTLR[idx] +Notes : Set counter control value +Depends : cntr_idx +Syntax : 'echo val > cntr_ctrl' + Where val is per ETMv4 spec. + +File : cntrldvr (rw) +Trace Registers : CNTRLDVR[idx] +Notes : Set counter reload value +Depends : cntr_idx +Syntax : 'echo val > cntrldvr' + Where val is per ETMv4 spec. + +File : nr_cntr (ro) +Trace Registers : From IDR5 +Notes : Number of counters implemented. + +File : ctxid_idx (rw) +Trace Registers : None +Notes : Select the context ID comparator to access +Syntax : 'echo idx > ctxid_idx' + Where idx < numcidc + +File : ctxid_pid (rw) +Trace Registers : CIDCVR[idx] +Notes : Set the context ID comparator value +Depends : ctxid_idx + +File : ctxid_masks (rw) +Trace Registers : CIDCCTLR0, CIDCCTLR1, CIDCVR<0-7> +Notes : Pair of values to set the byte masks for 1-8 context ID + comparators. Automatically clears masked bytes to 0 in CID + value registers. +Syntax : 'echo m3m2m1m0 [m7m6m5m4] > ctxid_masks' + 32 bit values made up of mask bytes, where mN represents a + byte mask value for Ctxt ID comparator N. + Second value not required on systems that have fewer than 4 + context ID comparators + +File : numcidc (ro) +Trace Registers : From IDR4 +Notes : Number of Context ID comparators + +File : vmid_idx (rw) +Trace Registers : None +Notes : Select the VM ID comparator to access. +Syntax : 'echo idx > vmid_idx' + Where idx < numvmidc + +File : vmid_val (rw) +Trace Registers : VMIDCVR[idx] +Notes : Set the VM ID comparator value +Depends : vmid_idx + +File : vmid_masks (rw) +Trace Registers : VMIDCCTLR0, VMIDCCTLR1, VMIDCVR<0-7> +Notes : Pair of values to set the byte masks for 1-8 VM ID + comparators. Automatically clears masked bytes to 0 in VMID + value registers. +Syntax : 'echo m3m2m1m0 [m7m6m5m4] > vmid_masks' + Where mN represents a byte mask value for VMID comparator N. + Second value not required on systems that have fewer than + 4 VMID comparators. + +File : numvmidc (ro) +Trace Registers : From IDR4 +Notes : Number of VMID comparators + +File : res_idx (rw) +Trace Registers : None. +Notes : Select the resource selector control to access. Must be 2 or + higher as selectors 0 and 1 are hardwired. +Syntax : 'echo idx > res_idx' + Where 2 <= idx < nr_resource x 2 + +File : res_ctrl (rw) +Trace Registers : RSCTLR[idx] +Notes : Set resource selector control value. Value per ETMv4 spec. +Depends : res_idx +Syntax : 'echo val > res_cntr' + Where val is per ETMv4 spec. + +File : nr_resource (ro) +Trace Registers : From IDR4 +Notes : Number of resource selector pairs + +File : event (rw) +Trace Registers : EVENTCTRL0R +Notes : Set up to 4 implemented event fields. +Syntax : 'echo ev3ev2ev1ev0 > event' + Where evN is an 8 bit event field. Up to 4 event fields make up + the 32bit input value. Number of valid fields implementation + dependent defined in IDR0. + +File : event_instren (rw) +Trace Registers : EVENTCTRL1R +Notes : Choose events which insert event packets into trace stream. +Depends : EVENTCTRL0R +Syntax : 'echo bitfield > event_instren' + Where bitfield is up to 4 bits according to number of event + fields. + +File : event_ts (rw) +Trace Registers : TSCTLR +Notes : Set the event that will generate timestamp requests. +Depends : TS activated +Syntax : 'echo evfield > event_ts' + Where evfield is an 8 bit event selector. + +File : seq_idx (rw) +Trace Registers : None +Notes : Sequencer event register select - 0 to 2 + + +File : seq_state (rw) +Trace Registers : SEQSTR +Notes : Sequencer current state - 0 to 3. + +File : seq_event (rw) +Trace Registers : SEQEVR[idx] +Notes : State transition event registers +Depends : seq_idx +Syntax : 'echo evBevF > seq_event' + Where evBevF is a 16 bit value made up of two event selectors, + evB - back, evF - forwards. + +File : seq_reset_event (rw) +Trace Registers : SEQRSTEVR +Notes : Sequencer reset event +Syntax : 'echo evfield > seq_reset_event' + Where evfield is an 8 bit event selector. + +File : nrseqstate (ro) +Trace Registers : From IDR5 +Notes : Number of sequencer states (0 or 4) + +File : nr_pe_cmp (ro) +Trace Registers : From IDR4 +Notes : Number of PE comparator inputs + +File : nr_ext_inp (ro) +Trace Registers : From IDR5 +Notes : Number of external inputs + +File : nr_ss_cmp (ro) +Trace Registers : From IDR4 +Notes : Number of Single Shot control registers + +Note: When programming any address comparator the driver will tag the +comparator with a type used - i.e. RANGE, SINGLE, START, STOP. Once this tag +is set, then only the values can be changed using the same sysfs file / type +used to program it. + +Thus:- +% echo 0 > addr_idx ; select address comparator 0 +% echo 0x1000 0x5000 0 > addr_range ; set address range on comparators 0 and 1. +% echo 0x2000 > addr_start ; this will error as comparator 0 is a + ; range comparator +% echo 2 > addr_idx ; select address comparator 2 +% echo 0x2000 > addr_start ; this is OK as comparator 2 is unused, +% echo 0x3000 > addr_stop ; this will error as comparator 2 a start + ; address comparator +% echo 2 > addr_idx ; select address comparator 3 +% echo 0x3000 > addr_stop ; this is OK + +To remove programming on all the comparators (and all the other hardware) use +the reset parameter: + +% echo 1 > reset + +The ‘mode’ sysfs parameter. +--------------------------- + +This is a bitfield selection parameter that sets the overall trace mode for the +ETM. The table below describes the bits, using the defines from the driver +source file, along with a description of the feature these represent. Many +features are optional and therefore dependent on implementation in the +hardware. + +Bit assignements shown below:- + +bit (0) : #define ETM_MODE_EXCLUDE +description : This is the default value for the include / exclude function when + setting address ranges. Set 1 for exclude range. When the mode + parameter is set this value is applied to the currently indexed + address range. + +bit (4) : #define ETM_MODE_BB +description : Set to enable branch broadcast if supported in hardware [IDR0]. + +bit (5) : #define ETMv4_MODE_CYCACC +description : Set to enable cycle accurate trace if supported [IDR0]. + +bit (6) : ETMv4_MODE_CTXID +description : Set to enable context ID tracing if supported in hardware [IDR2]. + +bit (7) : ETM_MODE_VMID +description : Set to enable virtual machine ID tracing if supported [IDR2]. + +bit (11) : ETMv4_MODE_TIMESTAMP +description : Set to enable timestamp generation if supported [IDR0]. + +bit (12) : ETM_MODE_RETURNSTACK +description : Set to enable trace return stack use if supported [IDR0]. + +bit (13-14) : ETM_MODE_QELEM(val) +description : ‘val’ determines level of Q element support enabled if + implemented by the ETM [IDR0] + +bit (19) : ETM_MODE_ATB_TRIGGER +description : Set to enable the ATBTRIGGER bit in the event control register + [EVENTCTLR1] if supported [IDR5]. + +bit (20) : ETM_MODE_LPOVERRIDE +description : Set to enable the LPOVERRIDE bit in the event control register + [EVENTCTLR1], if supported [IDR5]. + +bit (21) : ETM_MODE_ISTALL_EN +description : Set to enable the ISTALL bit in the stall control register + [STALLCTLR] + +bit (23) : ETM_MODE_INSTPRIO +description : Set to enable the INSTPRIORITY bit in the stall control register + [STALLCTLR] , if supported [IDR0]. + +bit (24) : ETM_MODE_NOOVERFLOW +description : Set to enable the NOOVERFLOW bit in the stall control register + [STALLCTLR], if supported [IDR3]. + +bit (25) : ETM_MODE_TRACE_RESET +description : Set to enable the TRCRESET bit in the viewinst control register + [VICTLR] , if supported [IDR3]. + +bit (26) : ETM_MODE_TRACE_ERR +description : Set to enable the TRCCTRL bit in the viewinst control register + [VICTLR]. + +bit (27) : ETM_MODE_VIEWINST_STARTSTOP +description : Set the initial state value of the ViewInst start / stop logic + in the viewinst control register [VICTLR] + +bit (30) : ETM_MODE_EXCL_KERN +description : Set default trace setup to exclude kernel mode trace (see note a) + +bit (31) : ETM_MODE_EXCL_USER +description : Set default trace setup to exclude user space trace (see note a) + +Note a) On startup the ETM is programmed to trace the complete address space +using address range comparator 0. ‘mode’ bits 30 / 31 modify this setting to +set EL exclude bits for NS state in either user space (EL0) or kernel space +(EL1) in the address range comparator. (the default setting excludes all +secure EL, and NS EL2) + +Once the reset parameter has been used, and/or custom programming has been +implemented - using these bits will result in the EL bits for address +comparator 0 being set in the same way. + +Note b) Bits 2-3, 8-10, 15-16, 18, 22, control features that only work with +data trace. As A profile data trace is architecturally prohibited in ETMv4, +these have been omitted here. Possible uses could be where a kernel has +support for control of R or M profile infrastructure as part of a heterogeneous +system. + +Bits 17, 28-29 are unused.

-- 2.17.1

Mathieu Poirier

3 Sep 3 Sep

7:38 p.m.

New subject: [PATCH v2 11/11] coresight: etm4x: docs: Adds detailed document for programming etm4x.

Hi Mike,

On Thu, Aug 29, 2019 at 10:33:21PM +0100, Mike Leach wrote:

...

Add in detailed programmers reference for users wanting to program the CoreSight ETM 4.x driver using sysfs.

Signed-off-by: Mike Leach mike.leach@linaro.org

.../coresight/coresight-etm4x-reference.txt | 458 ++++++++++++++++++ 1 file changed, 458 insertions(+) create mode 100644 Documentation/trace/coresight/coresight-etm4x-reference.txt

diff --git a/Documentation/trace/coresight/coresight-etm4x-reference.txt b/Documentation/trace/coresight/coresight-etm4x-reference.txt new file mode 100644 index 000000000000..f0c370870992 --- /dev/null +++ b/Documentation/trace/coresight/coresight-etm4x-reference.txt @@ -0,0 +1,458 @@ +ETMv4 sysfs linux driver programming reference - v2. +====================================================

+Supplement to existing ETMv4 driver documentation.

+Sysfs files and directories +---------------------------

+Root: /sys/bus/coresight/devices/etm<N>

+The following paragraphs explain the association between sysfs files and the +ETMv4 registers that they effect. Note the register names are given without +the ‘TRC’ prefix.

+File : mode (rw) +Trace Registers : {CONFIGR + others} +Notes : Bit select trace features. See ‘mode’ section below. Bits
in this will cause equivalent programming of trace config and
other registers to enable the features requested.
+Syntax & eg : 'echo bitfield > mode'
bitfield up to 32 bits setting trace features.
+Example : $> echo 0x > mode

I suspect things look different on your end than they do on mine. The biggest problem is related to multi-line fields. For instance the above looks like this on my side:

File : mode (rw) Trace Registers : {CONFIGR + others} Notes : Bit select trace features. See ‘mode’ section below. Bits in this will cause equivalent programming of trace config and other registers to enable the features requested. Syntax & eg : 'echo bitfield > mode' bitfield up to 32 bits setting trace features. Example : $> echo 0x > mode

It would be nicer to have multi-line fields aligned with the first line, such as:

I'm also not sure about the prompt, i.e "$>". I suspect it should be "$" and an additional ">" got inserted.

I wanted to read on but is it too difficult to know what is intentional and what isn't. Please address and resend.

Thanks, Mathieu

...

+File : reset (wo) +Trace Registers : All +Notes : Reset all programming to trace nothing / no logic programmed. +Syntax : 'echo 1 > reset'

+File : enable_source (wo) +Trace Registers : PRGCTLR, All hardware regs. +Notes : >0: Programs up the hardware with the current values held in
the driver and enables trace.
0: disable trace hardware.
+Syntax : 'echo 1 > enable_source'

+File : cpu (ro) +Trace Registers : None. +Notes : CPU ID that this ETM is attached to. +Example :$> cat cpu
$> 0
+File : addr_idx (rw) +Trace Registers : None. +Notes : Virtual register to index address comparator and range
features. Set index for first of the pair in a range.
+Syntax : 'echo idx > addr_idx'
Where idx <  nr_addr_cmp x 2
+File : addr_range (rw) +Trace Registers : ACVR[idx, idx+1], VIIECTLR +Notes : Pair of addresses for a range selected by addr_idx. Include
/ exclude according to the optional parameter, or if omitted
uses the current ‘mode’ setting. Select comparator range in
control register. Error if index is odd value.
+Depends : mode, addr_idx +Syntax : 'echo addr1 addr2 [exclude] > addr_range'
Where addr1 and addr2 define the range and addr1 < addr2.
Optional exclude value - 0 for include, 1 for exclude.
+Example : $> echo 0x0000 0x2000 0 > addr_range

+File : addr_single (rw) +Trace Registers : ACVR[idx] +Notes : Set a single address comparator according to addr_idx. This
is used if the address comparator is used as part of event
generation logic etc.
+Depends : addr_idx +Syntax : 'echo addr1 > addr_single'

+File : addr_start (rw) +Trace Registers : ACVR[idx], VISSCTLR +Notes : Set a trace start address comparator according to addr_idx.
Select comparator in control register.
+Depends : addr_idx +Syntax : 'echo addr1 > addr_start'

+File : addr_stop (rw) +Trace Registers : ACVR[idx], VISSCTLR +Notes : Set a trace stop address comparator according to addr_idx.
Select comparator in control register.
+Depends : addr_idx +Syntax : 'echo addr1 > addr_stop'

+File : addr_context (rw) +Trace Registers : ACATR[idx,{6:4}] +Notes : Link context ID comparator to address comparator addr_idx +Depends : addr_idx. +Syntax : 'echo ctxt_idx > addr_context'
Where ctxt_idx is the index of the linked context id / vmid
comparator.
+File : addr_ctxtype (rw) +Trace Registers : ACATR[idx,{3:2}] +Notes : Input value string. Set type for linked context ID comparator +Depends : addr_idx +Syntax : 'echo type > addr_ctxtype'
Type one of {all, vmid, ctxid, none}
+Example : $> echo ctxid > addr_ctxtype

+File : addr_exlevel_s_ns (rw) +Trace Registers : ACATR[idx,{14:8}] +Notes : Set the ELx secure and non-secure matching bits for the
selected address comparator
+Depends : addr_idx +Syntax : 'echo val > addr_exlevel_s_ns'
val is a 7 bit value for exception levels to exclude. Input
value shifted to correct bits in register.
+Example : $> echo 0x4F > addr_exlevel_s_ns

+File : addr_instdatatype (rw) +Trace Registers : ACATR[idx,{1:0}] +Notes : Set the comparator address type for matching. Driver only
supports setting instruction address type.
+Depends : addr_idx

+File : addr_cmp_view (ro) +Trace Registers : ACVR[idx, idx+1], ACATR[idx], VIIECTLR +Notes : Read the currently selected address comparator. If part of
address range then display both addresses.
+Depends : addr_idx +Syntax : 'cat addr_cmp_view' +Example : $> cat addr_cmp_view
addr_cmp[0] range 0x0 0xffffffffffffffff include ctrl(0x4b00)
+File : nr_addr_cmp (ro) +Trace Registers : From IDR4 +Notes : Number of address comparator pairs

+File : sshot_idx (rw) +Trace Registers : None +Notes : Select single shot register set.

+File : sshot_ctrl (rw) +Trace Registers : SSCCR[idx] +Notes : Access a single shot comparator control register. +Depends : sshot_idx +Syntax : 'echo val > sshot_ctrl'
Writes val into the selected control register.
+File : sshot_status (ro) +Trace Registers : SSCSR[idx] +Notes : Read a single shot comparator status register +Depends : sshot_idx +Syntax : 'cat sshot_status'
Read status.
+Example : $> cat sshot_status
0x1
+File : sshot_pe_ctrl (rw) +Trace Registers : SSPCICR[idx] +Notes : Access a single shot PE comparator input control register. +Depends : sshot_idx +Syntax : echo val > sshot_pe_ctrl
Writes val into the selected control register.
+File : ns_exlevel_vinst (rw) +Trace Registers : VICTLR{23:20} +Notes : Program non-secure exception level filters. Set / clear NS
exception filter bits. Setting ‘1’ excludes trace from the
exception level.
+Syntax : 'echo bitfield > ns_exlevel_viinst'
Where bitfield contains bits to set clear for EL0 to EL2
+Example : %> echo 0x4 > ns_exlevel_viinst
; Exclude EL2 NS trace.
+File : vinst_pe_cmp_start_stop (rw) +Trace Registers : VIPCSSCTLR +Notes : Access PE start stop comparator input control registers

+File : bb_ctrl (rw) +Trace Registers : BBCTLR +Notes : Define ranges that Branch Broadcast will operate in.
Default (0x0) is all addresses.
+Depends : BB enabled.

+File : cyc_threshold (rw) +Trace Registers : CCCTLR +Notes : Set the threshold for which cycle counts will be emitted.
Error if attempt to set below minimum defined in IDR3, masked
to width of valid bits.
+Depends : CC enabled.

+File : syncfreq (rw) +Trace Registers : SYNCPR +Notes : Set trace synchronisation period. Power of 2 value, 0 (off)
or 8-20. Driver defaults to 12 (every 4096 bytes).
+File : cntr_idx (rw) +Trace Registers : none +Notes : Select the counter to access +Syntax : 'echo idx > cntr_idx'
Where idx <  nr_cntr
+File : cntr_ctrl (rw) +Trace Registers : CNTCTLR[idx] +Notes : Set counter control value +Depends : cntr_idx +Syntax : 'echo val > cntr_ctrl'
Where val is per ETMv4 spec.
+File : cntrldvr (rw) +Trace Registers : CNTRLDVR[idx] +Notes : Set counter reload value +Depends : cntr_idx +Syntax : 'echo val > cntrldvr'
Where val is per ETMv4 spec.
+File : nr_cntr (ro) +Trace Registers : From IDR5 +Notes : Number of counters implemented.

+File : ctxid_idx (rw) +Trace Registers : None +Notes : Select the context ID comparator to access +Syntax : 'echo idx > ctxid_idx'
Where idx <  numcidc
+File : ctxid_pid (rw) +Trace Registers : CIDCVR[idx] +Notes : Set the context ID comparator value +Depends : ctxid_idx

+File : ctxid_masks (rw) +Trace Registers : CIDCCTLR0, CIDCCTLR1, CIDCVR<0-7> +Notes : Pair of values to set the byte masks for 1-8 context ID
comparators. Automatically clears masked bytes to 0 in CID
value registers.
+Syntax : 'echo m3m2m1m0 [m7m6m5m4] > ctxid_masks'
32 bit values made up of mask bytes, where mN represents a
byte mask value for Ctxt ID comparator N.
Second value not required on systems that have fewer than 4
context ID comparators
+File : numcidc (ro) +Trace Registers : From IDR4 +Notes : Number of Context ID comparators

+File : vmid_idx (rw) +Trace Registers : None +Notes : Select the VM ID comparator to access. +Syntax : 'echo idx > vmid_idx'
Where idx <  numvmidc
+File : vmid_val (rw) +Trace Registers : VMIDCVR[idx] +Notes : Set the VM ID comparator value +Depends : vmid_idx

+File : vmid_masks (rw) +Trace Registers : VMIDCCTLR0, VMIDCCTLR1, VMIDCVR<0-7> +Notes : Pair of values to set the byte masks for 1-8 VM ID
comparators. Automatically clears masked bytes to 0 in VMID
value registers.
+Syntax : 'echo m3m2m1m0 [m7m6m5m4] > vmid_masks'
Where mN represents a byte mask value for VMID comparator N.
Second value not required on systems that have fewer than
4 VMID comparators.
+File : numvmidc (ro) +Trace Registers : From IDR4 +Notes : Number of VMID comparators

+File : res_idx (rw) +Trace Registers : None. +Notes : Select the resource selector control to access. Must be 2 or
higher as selectors 0 and 1 are hardwired.
+Syntax : 'echo idx > res_idx'
Where 2 <= idx < nr_resource x 2
+File : res_ctrl (rw) +Trace Registers : RSCTLR[idx] +Notes : Set resource selector control value. Value per ETMv4 spec. +Depends : res_idx +Syntax : 'echo val > res_cntr'
Where val is per ETMv4 spec.
+File : nr_resource (ro) +Trace Registers : From IDR4 +Notes : Number of resource selector pairs

+File : event (rw) +Trace Registers : EVENTCTRL0R +Notes : Set up to 4 implemented event fields. +Syntax : 'echo ev3ev2ev1ev0 > event'
Where evN is an 8 bit event field. Up to 4 event fields make up
the 32bit input value. Number of valid fields implementation
dependent defined in IDR0.
+File : event_instren (rw) +Trace Registers : EVENTCTRL1R +Notes : Choose events which insert event packets into trace stream. +Depends : EVENTCTRL0R +Syntax : 'echo bitfield > event_instren'
Where bitfield is up to 4 bits according to number of event
fields.
+File : event_ts (rw) +Trace Registers : TSCTLR +Notes : Set the event that will generate timestamp requests. +Depends : TS activated +Syntax : 'echo evfield > event_ts'
Where evfield is an 8 bit event selector.
+File : seq_idx (rw) +Trace Registers : None +Notes : Sequencer event register select - 0 to 2

+File : seq_state (rw) +Trace Registers : SEQSTR +Notes : Sequencer current state - 0 to 3.

+File : seq_event (rw) +Trace Registers : SEQEVR[idx] +Notes : State transition event registers +Depends : seq_idx +Syntax : 'echo evBevF > seq_event'
Where evBevF is a 16 bit value made up of two event selectors,
evB - back, evF - forwards.
+File : seq_reset_event (rw) +Trace Registers : SEQRSTEVR +Notes : Sequencer reset event +Syntax : 'echo evfield > seq_reset_event'
Where evfield is an 8 bit event selector.
+File : nrseqstate (ro) +Trace Registers : From IDR5 +Notes : Number of sequencer states (0 or 4)

+File : nr_pe_cmp (ro) +Trace Registers : From IDR4 +Notes : Number of PE comparator inputs

+File : nr_ext_inp (ro) +Trace Registers : From IDR5 +Notes : Number of external inputs

+File : nr_ss_cmp (ro) +Trace Registers : From IDR4 +Notes : Number of Single Shot control registers

+Note: When programming any address comparator the driver will tag the +comparator with a type used - i.e. RANGE, SINGLE, START, STOP. Once this tag +is set, then only the values can be changed using the same sysfs file / type +used to program it.

+Thus:- +% echo 0 > addr_idx ; select address comparator 0 +% echo 0x1000 0x5000 0 > addr_range ; set address range on comparators 0 and 1. +% echo 0x2000 > addr_start ; this will error as comparator 0 is a
		    ; range comparator
+% echo 2 > addr_idx ; select address comparator 2 +% echo 0x2000 > addr_start ; this is OK as comparator 2 is unused, +% echo 0x3000 > addr_stop ; this will error as comparator 2 a start
		    ; address comparator
+% echo 2 > addr_idx ; select address comparator 3 +% echo 0x3000 > addr_stop ; this is OK

+To remove programming on all the comparators (and all the other hardware) use +the reset parameter:

+% echo 1 > reset

+The ‘mode’ sysfs parameter. +---------------------------

+This is a bitfield selection parameter that sets the overall trace mode for the +ETM. The table below describes the bits, using the defines from the driver +source file, along with a description of the feature these represent. Many +features are optional and therefore dependent on implementation in the +hardware.

+Bit assignements shown below:-

+bit (0) : #define ETM_MODE_EXCLUDE +description : This is the default value for the include / exclude function when
     setting address ranges. Set 1 for exclude range. When the mode
     parameter is set this value is applied to the currently indexed
     address range.
+bit (4) : #define ETM_MODE_BB +description : Set to enable branch broadcast if supported in hardware [IDR0].

+bit (5) : #define ETMv4_MODE_CYCACC +description : Set to enable cycle accurate trace if supported [IDR0].

+bit (6) : ETMv4_MODE_CTXID +description : Set to enable context ID tracing if supported in hardware [IDR2].

+bit (7) : ETM_MODE_VMID +description : Set to enable virtual machine ID tracing if supported [IDR2].

+bit (11) : ETMv4_MODE_TIMESTAMP +description : Set to enable timestamp generation if supported [IDR0].

+bit (12) : ETM_MODE_RETURNSTACK +description : Set to enable trace return stack use if supported [IDR0].

+bit (13-14) : ETM_MODE_QELEM(val) +description : ‘val’ determines level of Q element support enabled if
   implemented by the ETM [IDR0]
+bit (19) : ETM_MODE_ATB_TRIGGER +description : Set to enable the ATBTRIGGER bit in the event control register
   [EVENTCTLR1] if supported [IDR5].
+bit (20) : ETM_MODE_LPOVERRIDE +description : Set to enable the LPOVERRIDE bit in the event control register
   [EVENTCTLR1], if supported [IDR5].
+bit (21) : ETM_MODE_ISTALL_EN +description : Set to enable the ISTALL bit in the stall control register
   [STALLCTLR]
+bit (23) : ETM_MODE_INSTPRIO +description : Set to enable the INSTPRIORITY bit in the stall control register
   [STALLCTLR] , if supported [IDR0].
+bit (24) : ETM_MODE_NOOVERFLOW +description : Set to enable the NOOVERFLOW bit in the stall control register
   [STALLCTLR], if supported [IDR3].
+bit (25) : ETM_MODE_TRACE_RESET +description : Set to enable the TRCRESET bit in the viewinst control register
   [VICTLR] , if supported [IDR3].
+bit (26) : ETM_MODE_TRACE_ERR +description : Set to enable the TRCCTRL bit in the viewinst control register
   [VICTLR].
+bit (27) : ETM_MODE_VIEWINST_STARTSTOP +description : Set the initial state value of the ViewInst start / stop logic
   in the viewinst control register [VICTLR]
+bit (30) : ETM_MODE_EXCL_KERN +description : Set default trace setup to exclude kernel mode trace (see note a)

+bit (31) : ETM_MODE_EXCL_USER +description : Set default trace setup to exclude user space trace (see note a)

+Note a) On startup the ETM is programmed to trace the complete address space +using address range comparator 0. ‘mode’ bits 30 / 31 modify this setting to +set EL exclude bits for NS state in either user space (EL0) or kernel space +(EL1) in the address range comparator. (the default setting excludes all +secure EL, and NS EL2)

+Once the reset parameter has been used, and/or custom programming has been +implemented - using these bits will result in the EL bits for address +comparator 0 being set in the same way.

+Note b) Bits 2-3, 8-10, 15-16, 18, 22, control features that only work with +data trace. As A profile data trace is architecturally prohibited in ETMv4, +these have been omitted here. Possible uses could be where a kernel has +support for control of R or M profile infrastructure as part of a heterogeneous +system.

+Bits 17, 28-29 are unused.

2.17.1

Mike Leach

10:46 p.m.

New subject: [PATCH v2 11/11] coresight: etm4x: docs: Adds detailed document for programming etm4x.

Hi Mathieu,

On Tue, 3 Sep 2019 at 20:38, Mathieu Poirier mathieu.poirier@linaro.org wrote:

...

Hi Mike,

On Thu, Aug 29, 2019 at 10:33:21PM +0100, Mike Leach wrote:

...
Add in detailed programmers reference for users wanting to program the CoreSight ETM 4.x driver using sysfs.

Signed-off-by: Mike Leach mike.leach@linaro.org

.../coresight/coresight-etm4x-reference.txt | 458 ++++++++++++++++++ 1 file changed, 458 insertions(+) create mode 100644 Documentation/trace/coresight/coresight-etm4x-reference.txt

diff --git a/Documentation/trace/coresight/coresight-etm4x-reference.txt b/Documentation/trace/coresight/coresight-etm4x-reference.txt new file mode 100644 index 000000000000..f0c370870992 --- /dev/null +++ b/Documentation/trace/coresight/coresight-etm4x-reference.txt @@ -0,0 +1,458 @@ +ETMv4 sysfs linux driver programming reference - v2. +====================================================

+Supplement to existing ETMv4 driver documentation.

+Sysfs files and directories +---------------------------

+Root: /sys/bus/coresight/devices/etm<N>

+The following paragraphs explain the association between sysfs files and the +ETMv4 registers that they effect. Note the register names are given without +the ‘TRC’ prefix.

+File : mode (rw) +Trace Registers : {CONFIGR + others} +Notes : Bit select trace features. See ‘mode’ section below. Bits
        in this will cause equivalent programming of trace config and
        other registers to enable the features requested.
+Syntax & eg : 'echo bitfield > mode'
        bitfield up to 32 bits setting trace features.
+Example : $> echo 0x > mode
I suspect things look different on your end than they do on mine. The biggest problem is related to multi-line fields. For instance the above looks like this on my side:

File : mode (rw) Trace Registers : {CONFIGR + others} Notes : Bit select trace features. See ‘mode’ section below. Bits in this will cause equivalent programming of trace config and other registers to enable the features requested. Syntax & eg : 'echo bitfield > mode' bitfield up to 32 bits setting trace features. Example : $> echo 0x > mode

It would be nicer to have multi-line fields aligned with the first line, such as:

File : mode (rw) Trace Registers : {CONFIGR + others} Notes : Bit select trace features. See ‘mode’ section below. Bits in this will cause equivalent programming of trace config and other registers to enable the features requested. Syntax & eg : 'echo bitfield > mode' bitfield up to 32 bits setting trace features. Example : $> echo 0x > mode

Problem is I am not seeing any difference between what you say I am writing and what you prefer. When i looked at the file in my text editor the fields where aligned - I would not have submitted it otherwise. I am happy to revisit it but we need a way of seeing a common view.

...

I'm also not sure about the prompt, i.e "$>". I suspect it should be "$" and an additional ">" got inserted.

prompt came from examples lifted from a DB410 session. Don't really have any strong preference for what represents a prompt in the docs, so happy to change it to anything appropriate.

Regards

Mike

...

I wanted to read on but is it too difficult to know what is intentional and what isn't. Please address and resend.

Thanks, Mathieu

...
+File : reset (wo) +Trace Registers : All +Notes : Reset all programming to trace nothing / no logic programmed. +Syntax : 'echo 1 > reset'

+File : enable_source (wo) +Trace Registers : PRGCTLR, All hardware regs. +Notes : >0: Programs up the hardware with the current values held in
        the driver and enables trace.
        0: disable trace hardware.
+Syntax : 'echo 1 > enable_source'

+File : cpu (ro) +Trace Registers : None. +Notes : CPU ID that this ETM is attached to. +Example :$> cat cpu
        $> 0
+File : addr_idx (rw) +Trace Registers : None. +Notes : Virtual register to index address comparator and range
        features. Set index for first of the pair in a range.
+Syntax : 'echo idx > addr_idx'
        Where idx <  nr_addr_cmp x 2
+File : addr_range (rw) +Trace Registers : ACVR[idx, idx+1], VIIECTLR +Notes : Pair of addresses for a range selected by addr_idx. Include
        / exclude according to the optional parameter, or if omitted
        uses the current ‘mode’ setting. Select comparator range in
        control register. Error if index is odd value.
+Depends : mode, addr_idx +Syntax : 'echo addr1 addr2 [exclude] > addr_range'
        Where addr1 and addr2 define the range and addr1 < addr2.
        Optional exclude value - 0 for include, 1 for exclude.
+Example : $> echo 0x0000 0x2000 0 > addr_range

+File : addr_single (rw) +Trace Registers : ACVR[idx] +Notes : Set a single address comparator according to addr_idx. This
        is used if the address comparator is used as part of event
        generation logic etc.
+Depends : addr_idx +Syntax : 'echo addr1 > addr_single'

+File : addr_start (rw) +Trace Registers : ACVR[idx], VISSCTLR +Notes : Set a trace start address comparator according to addr_idx.
        Select comparator in control register.
+Depends : addr_idx +Syntax : 'echo addr1 > addr_start'

+File : addr_stop (rw) +Trace Registers : ACVR[idx], VISSCTLR +Notes : Set a trace stop address comparator according to addr_idx.
        Select comparator in control register.
+Depends : addr_idx +Syntax : 'echo addr1 > addr_stop'

+File : addr_context (rw) +Trace Registers : ACATR[idx,{6:4}] +Notes : Link context ID comparator to address comparator addr_idx +Depends : addr_idx. +Syntax : 'echo ctxt_idx > addr_context'
        Where ctxt_idx is the index of the linked context id / vmid
        comparator.
+File : addr_ctxtype (rw) +Trace Registers : ACATR[idx,{3:2}] +Notes : Input value string. Set type for linked context ID comparator +Depends : addr_idx +Syntax : 'echo type > addr_ctxtype'
        Type one of {all, vmid, ctxid, none}
+Example : $> echo ctxid > addr_ctxtype

+File : addr_exlevel_s_ns (rw) +Trace Registers : ACATR[idx,{14:8}] +Notes : Set the ELx secure and non-secure matching bits for the
        selected address comparator
+Depends : addr_idx +Syntax : 'echo val > addr_exlevel_s_ns'
        val is a 7 bit value for exception levels to exclude. Input
        value shifted to correct bits in register.
+Example : $> echo 0x4F > addr_exlevel_s_ns

+File : addr_instdatatype (rw) +Trace Registers : ACATR[idx,{1:0}] +Notes : Set the comparator address type for matching. Driver only
        supports setting instruction address type.
+Depends : addr_idx

+File : addr_cmp_view (ro) +Trace Registers : ACVR[idx, idx+1], ACATR[idx], VIIECTLR +Notes : Read the currently selected address comparator. If part of
        address range then display both addresses.
+Depends : addr_idx +Syntax : 'cat addr_cmp_view' +Example : $> cat addr_cmp_view
        addr_cmp[0] range 0x0 0xffffffffffffffff include ctrl(0x4b00)
+File : nr_addr_cmp (ro) +Trace Registers : From IDR4 +Notes : Number of address comparator pairs

+File : sshot_idx (rw) +Trace Registers : None +Notes : Select single shot register set.

+File : sshot_ctrl (rw) +Trace Registers : SSCCR[idx] +Notes : Access a single shot comparator control register. +Depends : sshot_idx +Syntax : 'echo val > sshot_ctrl'
        Writes val into the selected control register.
+File : sshot_status (ro) +Trace Registers : SSCSR[idx] +Notes : Read a single shot comparator status register +Depends : sshot_idx +Syntax : 'cat sshot_status'
        Read status.
+Example : $> cat sshot_status
        0x1
+File : sshot_pe_ctrl (rw) +Trace Registers : SSPCICR[idx] +Notes : Access a single shot PE comparator input control register. +Depends : sshot_idx +Syntax : echo val > sshot_pe_ctrl
        Writes val into the selected control register.
+File : ns_exlevel_vinst (rw) +Trace Registers : VICTLR{23:20} +Notes : Program non-secure exception level filters. Set / clear NS
        exception filter bits. Setting ‘1’ excludes trace from the
        exception level.
+Syntax : 'echo bitfield > ns_exlevel_viinst'
        Where bitfield contains bits to set clear for EL0 to EL2
+Example : %> echo 0x4 > ns_exlevel_viinst
        ; Exclude EL2 NS trace.
+File : vinst_pe_cmp_start_stop (rw) +Trace Registers : VIPCSSCTLR +Notes : Access PE start stop comparator input control registers

+File : bb_ctrl (rw) +Trace Registers : BBCTLR +Notes : Define ranges that Branch Broadcast will operate in.
        Default (0x0) is all addresses.
+Depends : BB enabled.

+File : cyc_threshold (rw) +Trace Registers : CCCTLR +Notes : Set the threshold for which cycle counts will be emitted.
        Error if attempt to set below minimum defined in IDR3, masked
        to width of valid bits.
+Depends : CC enabled.

+File : syncfreq (rw) +Trace Registers : SYNCPR +Notes : Set trace synchronisation period. Power of 2 value, 0 (off)
        or 8-20. Driver defaults to 12 (every 4096 bytes).
+File : cntr_idx (rw) +Trace Registers : none +Notes : Select the counter to access +Syntax : 'echo idx > cntr_idx'
        Where idx <  nr_cntr
+File : cntr_ctrl (rw) +Trace Registers : CNTCTLR[idx] +Notes : Set counter control value +Depends : cntr_idx +Syntax : 'echo val > cntr_ctrl'
        Where val is per ETMv4 spec.
+File : cntrldvr (rw) +Trace Registers : CNTRLDVR[idx] +Notes : Set counter reload value +Depends : cntr_idx +Syntax : 'echo val > cntrldvr'
        Where val is per ETMv4 spec.
+File : nr_cntr (ro) +Trace Registers : From IDR5 +Notes : Number of counters implemented.

+File : ctxid_idx (rw) +Trace Registers : None +Notes : Select the context ID comparator to access +Syntax : 'echo idx > ctxid_idx'
        Where idx <  numcidc
+File : ctxid_pid (rw) +Trace Registers : CIDCVR[idx] +Notes : Set the context ID comparator value +Depends : ctxid_idx

+File : ctxid_masks (rw) +Trace Registers : CIDCCTLR0, CIDCCTLR1, CIDCVR<0-7> +Notes : Pair of values to set the byte masks for 1-8 context ID
        comparators. Automatically clears masked bytes to 0 in CID
        value registers.
+Syntax : 'echo m3m2m1m0 [m7m6m5m4] > ctxid_masks'
        32 bit values made up of mask bytes, where mN represents a
        byte mask value for Ctxt ID comparator N.
        Second value not required on systems that have fewer than 4
        context ID comparators
+File : numcidc (ro) +Trace Registers : From IDR4 +Notes : Number of Context ID comparators

+File : vmid_idx (rw) +Trace Registers : None +Notes : Select the VM ID comparator to access. +Syntax : 'echo idx > vmid_idx'
        Where idx <  numvmidc
+File : vmid_val (rw) +Trace Registers : VMIDCVR[idx] +Notes : Set the VM ID comparator value +Depends : vmid_idx

+File : vmid_masks (rw) +Trace Registers : VMIDCCTLR0, VMIDCCTLR1, VMIDCVR<0-7> +Notes : Pair of values to set the byte masks for 1-8 VM ID
        comparators. Automatically clears masked bytes to 0 in VMID
        value registers.
+Syntax : 'echo m3m2m1m0 [m7m6m5m4] > vmid_masks'
        Where mN represents a byte mask value for VMID comparator N.
        Second value not required on systems that have fewer than
        4 VMID comparators.
+File : numvmidc (ro) +Trace Registers : From IDR4 +Notes : Number of VMID comparators

+File : res_idx (rw) +Trace Registers : None. +Notes : Select the resource selector control to access. Must be 2 or
        higher as selectors 0 and 1 are hardwired.
+Syntax : 'echo idx > res_idx'
        Where 2 <= idx < nr_resource x 2
+File : res_ctrl (rw) +Trace Registers : RSCTLR[idx] +Notes : Set resource selector control value. Value per ETMv4 spec. +Depends : res_idx +Syntax : 'echo val > res_cntr'
        Where val is per ETMv4 spec.
+File : nr_resource (ro) +Trace Registers : From IDR4 +Notes : Number of resource selector pairs

+File : event (rw) +Trace Registers : EVENTCTRL0R +Notes : Set up to 4 implemented event fields. +Syntax : 'echo ev3ev2ev1ev0 > event'
        Where evN is an 8 bit event field. Up to 4 event fields make up
        the 32bit input value. Number of valid fields implementation
        dependent defined in IDR0.
+File : event_instren (rw) +Trace Registers : EVENTCTRL1R +Notes : Choose events which insert event packets into trace stream. +Depends : EVENTCTRL0R +Syntax : 'echo bitfield > event_instren'
        Where bitfield is up to 4 bits according to number of event
        fields.
+File : event_ts (rw) +Trace Registers : TSCTLR +Notes : Set the event that will generate timestamp requests. +Depends : TS activated +Syntax : 'echo evfield > event_ts'
        Where evfield is an 8 bit event selector.
+File : seq_idx (rw) +Trace Registers : None +Notes : Sequencer event register select - 0 to 2

+File : seq_state (rw) +Trace Registers : SEQSTR +Notes : Sequencer current state - 0 to 3.

+File : seq_event (rw) +Trace Registers : SEQEVR[idx] +Notes : State transition event registers +Depends : seq_idx +Syntax : 'echo evBevF > seq_event'
        Where evBevF is a 16 bit value made up of two event selectors,
        evB - back, evF - forwards.
+File : seq_reset_event (rw) +Trace Registers : SEQRSTEVR +Notes : Sequencer reset event +Syntax : 'echo evfield > seq_reset_event'
        Where evfield is an 8 bit event selector.
+File : nrseqstate (ro) +Trace Registers : From IDR5 +Notes : Number of sequencer states (0 or 4)

+File : nr_pe_cmp (ro) +Trace Registers : From IDR4 +Notes : Number of PE comparator inputs

+File : nr_ext_inp (ro) +Trace Registers : From IDR5 +Notes : Number of external inputs

+File : nr_ss_cmp (ro) +Trace Registers : From IDR4 +Notes : Number of Single Shot control registers

+Note: When programming any address comparator the driver will tag the +comparator with a type used - i.e. RANGE, SINGLE, START, STOP. Once this tag +is set, then only the values can be changed using the same sysfs file / type +used to program it.

+Thus:- +% echo 0 > addr_idx ; select address comparator 0 +% echo 0x1000 0x5000 0 > addr_range ; set address range on comparators 0 and 1. +% echo 0x2000 > addr_start ; this will error as comparator 0 is a
                            ; range comparator
+% echo 2 > addr_idx ; select address comparator 2 +% echo 0x2000 > addr_start ; this is OK as comparator 2 is unused, +% echo 0x3000 > addr_stop ; this will error as comparator 2 a start
                            ; address comparator
+% echo 2 > addr_idx ; select address comparator 3 +% echo 0x3000 > addr_stop ; this is OK

+To remove programming on all the comparators (and all the other hardware) use +the reset parameter:

+% echo 1 > reset

+The ‘mode’ sysfs parameter. +---------------------------

+This is a bitfield selection parameter that sets the overall trace mode for the +ETM. The table below describes the bits, using the defines from the driver +source file, along with a description of the feature these represent. Many +features are optional and therefore dependent on implementation in the +hardware.

+Bit assignements shown below:-

+bit (0) : #define ETM_MODE_EXCLUDE +description : This is the default value for the include / exclude function when
      setting address ranges. Set 1 for exclude range. When the mode
      parameter is set this value is applied to the currently indexed
      address range.
+bit (4) : #define ETM_MODE_BB +description : Set to enable branch broadcast if supported in hardware [IDR0].

+bit (5) : #define ETMv4_MODE_CYCACC +description : Set to enable cycle accurate trace if supported [IDR0].

+bit (6) : ETMv4_MODE_CTXID +description : Set to enable context ID tracing if supported in hardware [IDR2].

+bit (7) : ETM_MODE_VMID +description : Set to enable virtual machine ID tracing if supported [IDR2].

+bit (11) : ETMv4_MODE_TIMESTAMP +description : Set to enable timestamp generation if supported [IDR0].

+bit (12) : ETM_MODE_RETURNSTACK +description : Set to enable trace return stack use if supported [IDR0].

+bit (13-14) : ETM_MODE_QELEM(val) +description : ‘val’ determines level of Q element support enabled if
    implemented by the ETM [IDR0]
+bit (19) : ETM_MODE_ATB_TRIGGER +description : Set to enable the ATBTRIGGER bit in the event control register
    [EVENTCTLR1] if supported [IDR5].
+bit (20) : ETM_MODE_LPOVERRIDE +description : Set to enable the LPOVERRIDE bit in the event control register
    [EVENTCTLR1], if supported [IDR5].
+bit (21) : ETM_MODE_ISTALL_EN +description : Set to enable the ISTALL bit in the stall control register
    [STALLCTLR]
+bit (23) : ETM_MODE_INSTPRIO +description : Set to enable the INSTPRIORITY bit in the stall control register
    [STALLCTLR] , if supported [IDR0].
+bit (24) : ETM_MODE_NOOVERFLOW +description : Set to enable the NOOVERFLOW bit in the stall control register
    [STALLCTLR], if supported [IDR3].
+bit (25) : ETM_MODE_TRACE_RESET +description : Set to enable the TRCRESET bit in the viewinst control register
    [VICTLR] , if supported [IDR3].
+bit (26) : ETM_MODE_TRACE_ERR +description : Set to enable the TRCCTRL bit in the viewinst control register
    [VICTLR].
+bit (27) : ETM_MODE_VIEWINST_STARTSTOP +description : Set the initial state value of the ViewInst start / stop logic
    in the viewinst control register [VICTLR]
+bit (30) : ETM_MODE_EXCL_KERN +description : Set default trace setup to exclude kernel mode trace (see note a)

+bit (31) : ETM_MODE_EXCL_USER +description : Set default trace setup to exclude user space trace (see note a)

+Note a) On startup the ETM is programmed to trace the complete address space +using address range comparator 0. ‘mode’ bits 30 / 31 modify this setting to +set EL exclude bits for NS state in either user space (EL0) or kernel space +(EL1) in the address range comparator. (the default setting excludes all +secure EL, and NS EL2)

+Once the reset parameter has been used, and/or custom programming has been +implemented - using these bits will result in the EL bits for address +comparator 0 being set in the same way.

+Note b) Bits 2-3, 8-10, 15-16, 18, 22, control features that only work with +data trace. As A profile data trace is architecturally prohibited in ETMv4, +these have been omitted here. Possible uses could be where a kernel has +support for control of R or M profile infrastructure as part of a heterogeneous +system.

+Bits 17, 28-29 are unused.

2.17.1

-- Mike Leach Principal Engineer, ARM Ltd. Manchester Design Centre. UK

Mathieu Poirier

4 Sep 4 Sep

4:09 p.m.

New subject: [PATCH v2 11/11] coresight: etm4x: docs: Adds detailed document for programming etm4x.

On Tue, 3 Sep 2019 at 16:47, Mike Leach mike.leach@linaro.org wrote:

...

Hi Mathieu,

On Tue, 3 Sep 2019 at 20:38, Mathieu Poirier mathieu.poirier@linaro.org wrote:

...
Hi Mike,

On Thu, Aug 29, 2019 at 10:33:21PM +0100, Mike Leach wrote:

...
Add in detailed programmers reference for users wanting to program the CoreSight ETM 4.x driver using sysfs.

Signed-off-by: Mike Leach mike.leach@linaro.org

.../coresight/coresight-etm4x-reference.txt | 458 ++++++++++++++++++ 1 file changed, 458 insertions(+) create mode 100644 Documentation/trace/coresight/coresight-etm4x-reference.txt

diff --git a/Documentation/trace/coresight/coresight-etm4x-reference.txt b/Documentation/trace/coresight/coresight-etm4x-reference.txt new file mode 100644 index 000000000000..f0c370870992 --- /dev/null +++ b/Documentation/trace/coresight/coresight-etm4x-reference.txt @@ -0,0 +1,458 @@ +ETMv4 sysfs linux driver programming reference - v2. +====================================================

+Supplement to existing ETMv4 driver documentation.

+Sysfs files and directories +---------------------------

+Root: /sys/bus/coresight/devices/etm<N>

+The following paragraphs explain the association between sysfs files and the +ETMv4 registers that they effect. Note the register names are given without +the ‘TRC’ prefix.

+File : mode (rw) +Trace Registers : {CONFIGR + others} +Notes : Bit select trace features. See ‘mode’ section below. Bits
        in this will cause equivalent programming of trace config and
        other registers to enable the features requested.
+Syntax & eg : 'echo bitfield > mode'
        bitfield up to 32 bits setting trace features.
+Example : $> echo 0x > mode
I suspect things look different on your end than they do on mine. The biggest problem is related to multi-line fields. For instance the above looks like this on my side:

File : mode (rw) Trace Registers : {CONFIGR + others} Notes : Bit select trace features. See ‘mode’ section below. Bits in this will cause equivalent programming of trace config and other registers to enable the features requested. Syntax & eg : 'echo bitfield > mode' bitfield up to 32 bits setting trace features. Example : $> echo 0x > mode

It would be nicer to have multi-line fields aligned with the first line, such as:

File : mode (rw) Trace Registers : {CONFIGR + others} Notes : Bit select trace features. See ‘mode’ section below. Bits in this will cause equivalent programming of trace config and other registers to enable the features requested. Syntax & eg : 'echo bitfield > mode' bitfield up to 32 bits setting trace features. Example : $> echo 0x > mode
Problem is I am not seeing any difference between what you say I am writing and what you prefer. When i looked at the file in my text editor the fields where aligned - I would not have submitted it otherwise.

Indeed - I suspected that much.

...

I am happy to revisit it but we need a way of seeing a common view.

Agreed

...

...
I'm also not sure about the prompt, i.e "$>". I suspect it should be "$" and an additional ">" got inserted.

prompt came from examples lifted from a DB410 session. Don't really have any strong preference for what represents a prompt in the docs, so happy to change it to anything appropriate.

Ok, I wasn't sure if this was really the prompt you were getting of corruption.

...

Regards

Mike

...
I wanted to read on but is it too difficult to know what is intentional and what isn't. Please address and resend.

Thanks, Mathieu

...
+File : reset (wo) +Trace Registers : All +Notes : Reset all programming to trace nothing / no logic programmed. +Syntax : 'echo 1 > reset'

+File : enable_source (wo) +Trace Registers : PRGCTLR, All hardware regs. +Notes : >0: Programs up the hardware with the current values held in
        the driver and enables trace.
        0: disable trace hardware.
+Syntax : 'echo 1 > enable_source'

+File : cpu (ro) +Trace Registers : None. +Notes : CPU ID that this ETM is attached to. +Example :$> cat cpu
        $> 0
+File : addr_idx (rw) +Trace Registers : None. +Notes : Virtual register to index address comparator and range
        features. Set index for first of the pair in a range.
+Syntax : 'echo idx > addr_idx'
        Where idx <  nr_addr_cmp x 2
+File : addr_range (rw) +Trace Registers : ACVR[idx, idx+1], VIIECTLR +Notes : Pair of addresses for a range selected by addr_idx. Include
        / exclude according to the optional parameter, or if omitted
        uses the current ‘mode’ setting. Select comparator range in
        control register. Error if index is odd value.
+Depends : mode, addr_idx +Syntax : 'echo addr1 addr2 [exclude] > addr_range'
        Where addr1 and addr2 define the range and addr1 < addr2.
        Optional exclude value - 0 for include, 1 for exclude.
+Example : $> echo 0x0000 0x2000 0 > addr_range

+File : addr_single (rw) +Trace Registers : ACVR[idx] +Notes : Set a single address comparator according to addr_idx. This
        is used if the address comparator is used as part of event
        generation logic etc.
+Depends : addr_idx +Syntax : 'echo addr1 > addr_single'

+File : addr_start (rw) +Trace Registers : ACVR[idx], VISSCTLR +Notes : Set a trace start address comparator according to addr_idx.
        Select comparator in control register.
+Depends : addr_idx +Syntax : 'echo addr1 > addr_start'

+File : addr_stop (rw) +Trace Registers : ACVR[idx], VISSCTLR +Notes : Set a trace stop address comparator according to addr_idx.
        Select comparator in control register.
+Depends : addr_idx +Syntax : 'echo addr1 > addr_stop'

+File : addr_context (rw) +Trace Registers : ACATR[idx,{6:4}] +Notes : Link context ID comparator to address comparator addr_idx +Depends : addr_idx. +Syntax : 'echo ctxt_idx > addr_context'
        Where ctxt_idx is the index of the linked context id / vmid
        comparator.
+File : addr_ctxtype (rw) +Trace Registers : ACATR[idx,{3:2}] +Notes : Input value string. Set type for linked context ID comparator +Depends : addr_idx +Syntax : 'echo type > addr_ctxtype'
        Type one of {all, vmid, ctxid, none}
+Example : $> echo ctxid > addr_ctxtype

+File : addr_exlevel_s_ns (rw) +Trace Registers : ACATR[idx,{14:8}] +Notes : Set the ELx secure and non-secure matching bits for the
        selected address comparator
+Depends : addr_idx +Syntax : 'echo val > addr_exlevel_s_ns'
        val is a 7 bit value for exception levels to exclude. Input
        value shifted to correct bits in register.
+Example : $> echo 0x4F > addr_exlevel_s_ns

+File : addr_instdatatype (rw) +Trace Registers : ACATR[idx,{1:0}] +Notes : Set the comparator address type for matching. Driver only
        supports setting instruction address type.
+Depends : addr_idx

+File : addr_cmp_view (ro) +Trace Registers : ACVR[idx, idx+1], ACATR[idx], VIIECTLR +Notes : Read the currently selected address comparator. If part of
        address range then display both addresses.
+Depends : addr_idx +Syntax : 'cat addr_cmp_view' +Example : $> cat addr_cmp_view
        addr_cmp[0] range 0x0 0xffffffffffffffff include ctrl(0x4b00)
+File : nr_addr_cmp (ro) +Trace Registers : From IDR4 +Notes : Number of address comparator pairs

+File : sshot_idx (rw) +Trace Registers : None +Notes : Select single shot register set.

+File : sshot_ctrl (rw) +Trace Registers : SSCCR[idx] +Notes : Access a single shot comparator control register. +Depends : sshot_idx +Syntax : 'echo val > sshot_ctrl'
        Writes val into the selected control register.
+File : sshot_status (ro) +Trace Registers : SSCSR[idx] +Notes : Read a single shot comparator status register +Depends : sshot_idx +Syntax : 'cat sshot_status'
        Read status.
+Example : $> cat sshot_status
        0x1
+File : sshot_pe_ctrl (rw) +Trace Registers : SSPCICR[idx] +Notes : Access a single shot PE comparator input control register. +Depends : sshot_idx +Syntax : echo val > sshot_pe_ctrl
        Writes val into the selected control register.
+File : ns_exlevel_vinst (rw) +Trace Registers : VICTLR{23:20} +Notes : Program non-secure exception level filters. Set / clear NS
        exception filter bits. Setting ‘1’ excludes trace from the
        exception level.
+Syntax : 'echo bitfield > ns_exlevel_viinst'
        Where bitfield contains bits to set clear for EL0 to EL2
+Example : %> echo 0x4 > ns_exlevel_viinst
        ; Exclude EL2 NS trace.
+File : vinst_pe_cmp_start_stop (rw) +Trace Registers : VIPCSSCTLR +Notes : Access PE start stop comparator input control registers

+File : bb_ctrl (rw) +Trace Registers : BBCTLR +Notes : Define ranges that Branch Broadcast will operate in.
        Default (0x0) is all addresses.
+Depends : BB enabled.

+File : cyc_threshold (rw) +Trace Registers : CCCTLR +Notes : Set the threshold for which cycle counts will be emitted.
        Error if attempt to set below minimum defined in IDR3, masked
        to width of valid bits.
+Depends : CC enabled.

+File : syncfreq (rw) +Trace Registers : SYNCPR +Notes : Set trace synchronisation period. Power of 2 value, 0 (off)
        or 8-20. Driver defaults to 12 (every 4096 bytes).
+File : cntr_idx (rw) +Trace Registers : none +Notes : Select the counter to access +Syntax : 'echo idx > cntr_idx'
        Where idx <  nr_cntr
+File : cntr_ctrl (rw) +Trace Registers : CNTCTLR[idx] +Notes : Set counter control value +Depends : cntr_idx +Syntax : 'echo val > cntr_ctrl'
        Where val is per ETMv4 spec.
+File : cntrldvr (rw) +Trace Registers : CNTRLDVR[idx] +Notes : Set counter reload value +Depends : cntr_idx +Syntax : 'echo val > cntrldvr'
        Where val is per ETMv4 spec.
+File : nr_cntr (ro) +Trace Registers : From IDR5 +Notes : Number of counters implemented.

+File : ctxid_idx (rw) +Trace Registers : None +Notes : Select the context ID comparator to access +Syntax : 'echo idx > ctxid_idx'
        Where idx <  numcidc
+File : ctxid_pid (rw) +Trace Registers : CIDCVR[idx] +Notes : Set the context ID comparator value +Depends : ctxid_idx

+File : ctxid_masks (rw) +Trace Registers : CIDCCTLR0, CIDCCTLR1, CIDCVR<0-7> +Notes : Pair of values to set the byte masks for 1-8 context ID
        comparators. Automatically clears masked bytes to 0 in CID
        value registers.
+Syntax : 'echo m3m2m1m0 [m7m6m5m4] > ctxid_masks'
        32 bit values made up of mask bytes, where mN represents a
        byte mask value for Ctxt ID comparator N.
        Second value not required on systems that have fewer than 4
        context ID comparators
+File : numcidc (ro) +Trace Registers : From IDR4 +Notes : Number of Context ID comparators

+File : vmid_idx (rw) +Trace Registers : None +Notes : Select the VM ID comparator to access. +Syntax : 'echo idx > vmid_idx'
        Where idx <  numvmidc
+File : vmid_val (rw) +Trace Registers : VMIDCVR[idx] +Notes : Set the VM ID comparator value +Depends : vmid_idx

+File : vmid_masks (rw) +Trace Registers : VMIDCCTLR0, VMIDCCTLR1, VMIDCVR<0-7> +Notes : Pair of values to set the byte masks for 1-8 VM ID
        comparators. Automatically clears masked bytes to 0 in VMID
        value registers.
+Syntax : 'echo m3m2m1m0 [m7m6m5m4] > vmid_masks'
        Where mN represents a byte mask value for VMID comparator N.
        Second value not required on systems that have fewer than
        4 VMID comparators.
+File : numvmidc (ro) +Trace Registers : From IDR4 +Notes : Number of VMID comparators

+File : res_idx (rw) +Trace Registers : None. +Notes : Select the resource selector control to access. Must be 2 or
        higher as selectors 0 and 1 are hardwired.
+Syntax : 'echo idx > res_idx'
        Where 2 <= idx < nr_resource x 2
+File : res_ctrl (rw) +Trace Registers : RSCTLR[idx] +Notes : Set resource selector control value. Value per ETMv4 spec. +Depends : res_idx +Syntax : 'echo val > res_cntr'
        Where val is per ETMv4 spec.
+File : nr_resource (ro) +Trace Registers : From IDR4 +Notes : Number of resource selector pairs

+File : event (rw) +Trace Registers : EVENTCTRL0R +Notes : Set up to 4 implemented event fields. +Syntax : 'echo ev3ev2ev1ev0 > event'
        Where evN is an 8 bit event field. Up to 4 event fields make up
        the 32bit input value. Number of valid fields implementation
        dependent defined in IDR0.
+File : event_instren (rw) +Trace Registers : EVENTCTRL1R +Notes : Choose events which insert event packets into trace stream. +Depends : EVENTCTRL0R +Syntax : 'echo bitfield > event_instren'
        Where bitfield is up to 4 bits according to number of event
        fields.
+File : event_ts (rw) +Trace Registers : TSCTLR +Notes : Set the event that will generate timestamp requests. +Depends : TS activated +Syntax : 'echo evfield > event_ts'
        Where evfield is an 8 bit event selector.
+File : seq_idx (rw) +Trace Registers : None +Notes : Sequencer event register select - 0 to 2

+File : seq_state (rw) +Trace Registers : SEQSTR +Notes : Sequencer current state - 0 to 3.

+File : seq_event (rw) +Trace Registers : SEQEVR[idx] +Notes : State transition event registers +Depends : seq_idx +Syntax : 'echo evBevF > seq_event'
        Where evBevF is a 16 bit value made up of two event selectors,
        evB - back, evF - forwards.
+File : seq_reset_event (rw) +Trace Registers : SEQRSTEVR +Notes : Sequencer reset event +Syntax : 'echo evfield > seq_reset_event'
        Where evfield is an 8 bit event selector.
+File : nrseqstate (ro) +Trace Registers : From IDR5 +Notes : Number of sequencer states (0 or 4)

+File : nr_pe_cmp (ro) +Trace Registers : From IDR4 +Notes : Number of PE comparator inputs

+File : nr_ext_inp (ro) +Trace Registers : From IDR5 +Notes : Number of external inputs

+File : nr_ss_cmp (ro) +Trace Registers : From IDR4 +Notes : Number of Single Shot control registers

+Note: When programming any address comparator the driver will tag the +comparator with a type used - i.e. RANGE, SINGLE, START, STOP. Once this tag +is set, then only the values can be changed using the same sysfs file / type +used to program it.

+Thus:- +% echo 0 > addr_idx ; select address comparator 0 +% echo 0x1000 0x5000 0 > addr_range ; set address range on comparators 0 and 1. +% echo 0x2000 > addr_start ; this will error as comparator 0 is a
                            ; range comparator
+% echo 2 > addr_idx ; select address comparator 2 +% echo 0x2000 > addr_start ; this is OK as comparator 2 is unused, +% echo 0x3000 > addr_stop ; this will error as comparator 2 a start
                            ; address comparator
+% echo 2 > addr_idx ; select address comparator 3 +% echo 0x3000 > addr_stop ; this is OK

+To remove programming on all the comparators (and all the other hardware) use +the reset parameter:

+% echo 1 > reset

+The ‘mode’ sysfs parameter. +---------------------------

+This is a bitfield selection parameter that sets the overall trace mode for the +ETM. The table below describes the bits, using the defines from the driver +source file, along with a description of the feature these represent. Many +features are optional and therefore dependent on implementation in the +hardware.

+Bit assignements shown below:-

+bit (0) : #define ETM_MODE_EXCLUDE +description : This is the default value for the include / exclude function when
      setting address ranges. Set 1 for exclude range. When the mode
      parameter is set this value is applied to the currently indexed
      address range.
+bit (4) : #define ETM_MODE_BB +description : Set to enable branch broadcast if supported in hardware [IDR0].

+bit (5) : #define ETMv4_MODE_CYCACC +description : Set to enable cycle accurate trace if supported [IDR0].

+bit (6) : ETMv4_MODE_CTXID +description : Set to enable context ID tracing if supported in hardware [IDR2].

+bit (7) : ETM_MODE_VMID +description : Set to enable virtual machine ID tracing if supported [IDR2].

+bit (11) : ETMv4_MODE_TIMESTAMP +description : Set to enable timestamp generation if supported [IDR0].

+bit (12) : ETM_MODE_RETURNSTACK +description : Set to enable trace return stack use if supported [IDR0].

+bit (13-14) : ETM_MODE_QELEM(val) +description : ‘val’ determines level of Q element support enabled if
    implemented by the ETM [IDR0]
+bit (19) : ETM_MODE_ATB_TRIGGER +description : Set to enable the ATBTRIGGER bit in the event control register
    [EVENTCTLR1] if supported [IDR5].
+bit (20) : ETM_MODE_LPOVERRIDE +description : Set to enable the LPOVERRIDE bit in the event control register
    [EVENTCTLR1], if supported [IDR5].
+bit (21) : ETM_MODE_ISTALL_EN +description : Set to enable the ISTALL bit in the stall control register
    [STALLCTLR]
+bit (23) : ETM_MODE_INSTPRIO +description : Set to enable the INSTPRIORITY bit in the stall control register
    [STALLCTLR] , if supported [IDR0].
+bit (24) : ETM_MODE_NOOVERFLOW +description : Set to enable the NOOVERFLOW bit in the stall control register
    [STALLCTLR], if supported [IDR3].
+bit (25) : ETM_MODE_TRACE_RESET +description : Set to enable the TRCRESET bit in the viewinst control register
    [VICTLR] , if supported [IDR3].
+bit (26) : ETM_MODE_TRACE_ERR +description : Set to enable the TRCCTRL bit in the viewinst control register
    [VICTLR].
+bit (27) : ETM_MODE_VIEWINST_STARTSTOP +description : Set the initial state value of the ViewInst start / stop logic
    in the viewinst control register [VICTLR]
+bit (30) : ETM_MODE_EXCL_KERN +description : Set default trace setup to exclude kernel mode trace (see note a)

+bit (31) : ETM_MODE_EXCL_USER +description : Set default trace setup to exclude user space trace (see note a)

+Note a) On startup the ETM is programmed to trace the complete address space +using address range comparator 0. ‘mode’ bits 30 / 31 modify this setting to +set EL exclude bits for NS state in either user space (EL0) or kernel space +(EL1) in the address range comparator. (the default setting excludes all +secure EL, and NS EL2)

+Once the reset parameter has been used, and/or custom programming has been +implemented - using these bits will result in the EL bits for address +comparator 0 being set in the same way.

+Note b) Bits 2-3, 8-10, 15-16, 18, 22, control features that only work with +data trace. As A profile data trace is architecturally prohibited in ETMv4, +these have been omitted here. Possible uses could be where a kernel has +support for control of R or M profile infrastructure as part of a heterogeneous +system.

+Bits 17, 28-29 are unused.

2.17.1
-- Mike Leach Principal Engineer, ARM Ltd. Manchester Design Centre. UK

1904

days inactive

1966

days old

coresight@lists.linaro.org

25 comments

participants

tags (0)

participants (5)

Greg KH
Mathieu Poirier
Mike Leach
Rikard Falkeborn
Suzuki K Poulose