On 22/12/2025 06:02, Jie Gan wrote:

From: Tao Zhang tao.zhang@oss.qualcomm.com

The TPDA_SYNC counter tracks the number of bytes transferred from the aggregator. When this count reaches the value programmed in the TPDA_SYNCR register, an ASYNC request is triggered, allowing userspace tools to accurately parse each valid packet.

Signed-off-by: Tao Zhang tao.zhang@oss.qualcomm.com Reviewed-by: James Clark james.clark@linaro.org Co-developed-by: Jie Gan jie.gan@oss.qualcomm.com Signed-off-by: Jie Gan jie.gan@oss.qualcomm.com

---

.../ABI/testing/sysfs-bus-coresight-devices-tpda | 10 +++++ drivers/hwtracing/coresight/coresight-tpda.c | 46 ++++++++++++++++++++++ drivers/hwtracing/coresight/coresight-tpda.h | 8 ++++ 3 files changed, 64 insertions(+)

diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpda b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpda index c8bc7b19ab25..d359d90dca72 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpda +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpda @@ -41,3 +41,13 @@ Contact: Jinlong Mao jinlong.mao@oss.qualcomm.com, Tao Zhang <tao.zhang@oss.qu Description: (RW) Set global (all ports) flush request bit. The bit remains set until a global flush request sequence completes.

+What: /sys/bus/coresight/devices/<tpda-name>/syncr_mode +Date: December 2025 +KernelVersion: 6.19 +Contact: Jinlong Mao jinlong.mao@oss.qualcomm.com, Tao Zhang tao.zhang@oss.qualcomm.com, Jie Gan jie.gan@oss.qualcomm.com +Description:

• (RW) Set mode the of the syncr counter.
  

• mode 0 - COUNT[11:0] value represents the approximate number of bytes moved between two ASYNC packet requests
  

• mode 1 - the bits COUNT[11:7] are used as a power of 2. for example, we could insert an async packet every 8K
  

•          data by writing a value 13 to the COUNT[11:7] field.
  

What is COUNT here ? and more importantly how is this usefule without the support for setting the COUNT ? Do we plan to expose setting this ? If yes, why not now ? I don't see the point of merging "this" patch without the support for setting the counter.

Suzuki

diff --git a/drivers/hwtracing/coresight/coresight-tpda.c b/drivers/hwtracing/coresight/coresight-tpda.c index d24a9098f1b1..7baa8a0965d3 100644 --- a/drivers/hwtracing/coresight/coresight-tpda.c +++ b/drivers/hwtracing/coresight/coresight-tpda.c @@ -163,6 +163,15 @@ static void tpda_enable_pre_port(struct tpda_drvdata *drvdata) */ if (drvdata->trig_flag_ts) writel_relaxed(0x0, drvdata->base + TPDA_FPID_CR);

• /* Initialize with a value of 0 */
• val = 0;
• if (drvdata->syncr_mode)

• val |= TPDA_SYNCR_MODE_CTRL_MASK;
  

• /* Program the counter to its MAX value by default */
• val |= TPDA_SYNCR_COUNTER_MASK;
• writel_relaxed(val, drvdata->base + TPDA_SYNCR); }

static int tpda_enable_port(struct tpda_drvdata *drvdata, int port) @@ -385,8 +394,45 @@ static ssize_t global_flush_req_store(struct device *dev, } static DEVICE_ATTR_RW(global_flush_req); +static ssize_t syncr_mode_show(struct device *dev,

• 	       struct device_attribute *attr,
  

• 	       char *buf)
  

+{

• struct tpda_drvdata *drvdata = dev_get_drvdata(dev->parent);
• unsigned long val, syncr_val;
• if (!drvdata->csdev->refcnt)

• return -EINVAL;
  

• guard(spinlock)(&drvdata->spinlock);
• syncr_val = readl_relaxed(drvdata->base + TPDA_SYNCR);
• val = FIELD_GET(TPDA_SYNCR_MODE_CTRL_MASK, syncr_val);
• return sysfs_emit(buf, "%lu\n", val);

+}

+static ssize_t syncr_mode_store(struct device *dev,

• 		struct device_attribute *attr,
  

• 		const char *buf,
  

• 		size_t size)
  

+{

• struct tpda_drvdata *drvdata = dev_get_drvdata(dev->parent);
• unsigned long val;
• if (kstrtoul(buf, 0, &val))

• return -EINVAL;
  

• guard(spinlock)(&drvdata->spinlock);
• /* set the mode when first enabling the device */
• drvdata->syncr_mode = !!val;
• return size;

+} +static DEVICE_ATTR_RW(syncr_mode);

• static struct attribute *tpda_attrs[] = { &dev_attr_global_flush_req.attr,
• &dev_attr_syncr_mode.attr, tpda_trig_sysfs_rw(freq_ts_enable, FREQTS), tpda_trig_sysfs_rw(trig_freq_enable, FRIE), tpda_trig_sysfs_rw(trig_flag_ts_enable, FLRIE),

diff --git a/drivers/hwtracing/coresight/coresight-tpda.h b/drivers/hwtracing/coresight/coresight-tpda.h index 1cc9253293ec..1d2de50bb9f9 100644 --- a/drivers/hwtracing/coresight/coresight-tpda.h +++ b/drivers/hwtracing/coresight/coresight-tpda.h @@ -9,6 +9,7 @@ #define TPDA_CR (0x000) #define TPDA_Pn_CR(n) (0x004 + (n * 4)) #define TPDA_FPID_CR (0x084) +#define TPDA_SYNCR (0x08C) /* Cross trigger global (all ports) flush request bit */ #define TPDA_CR_FLREQ BIT(0) @@ -36,6 +37,11 @@ /* Aggregator port DSB data set element size bit */ #define TPDA_Pn_CR_DSBSIZE BIT(8) +/* TPDA_SYNCR counter mask */ +#define TPDA_SYNCR_COUNTER_MASK GENMASK(11, 0) +/* TPDA_SYNCR mode control bit */ +#define TPDA_SYNCR_MODE_CTRL_MASK GENMASK(12, 12)

• #define TPDA_MAX_INPORTS 32

/** @@ -52,6 +58,7 @@

• @trig_freq: Enable/disable cross trigger FREQ packet request interface.
• @freq_ts: Enable/disable the timestamp for all FREQ packets.
• @cmbchan_mode: Configure the CMB/MCMB channel mode.

• • @syncr_mode: Configure the mode for counting packets.
  */ struct tpda_drvdata { void __iomem *base;

@@ -66,6 +73,7 @@ struct tpda_drvdata { bool trig_freq; bool freq_ts; bool cmbchan_mode;

• bool syncr_mode; };

/* Enumerate members of global control register(cr) */