(Maintainers bcc, to avoid too many recipient troubles)
As discussed at: https://lore.kernel.org/linux-doc/871r9k6rmy.fsf@meer.lwn.net/
It is better to avoid using :doc:`foo` to refer to Documentation/foo.rst, as the automarkup.py extension should handle it automatically, on most cases.
There are a couple of exceptions to this rule:
1. when :doc: tag is used to point to a kernel-doc DOC: markup; 2. when it is used with a named tag, e. g. :doc:`some name <foo>`;
On this series:
Patch 1 manually adjust the references inside driver-api/pm/devices.rst, as there it uses :file:`foo` to refer to some Documentation/ files;
Patch 2 converts a table at Documentation/dev-tools/kunit/api/index.rst into a list, carefully avoiding the
The remaining patches convert the other occurrences via a replace script. They were manually edited, in order to honour 80-columns where possible.
This series based on docs-next branch. In order to avoid merge conflicts, I rebased it internally against yesterday's linux-next, dropping a patch and a hunk that would have caused conflicts there.
I'll re-send the remaining patch (plus another patch) with conflicting changes, together with any other doc:`filename` reference that might still be upstream by 5.14-rc1.
---
v2: - dropped media patches (as I merged via my own tree); - removed one patch that would conflict at linux-next (adm1177.rst); - removed one hunk fron kunit patch that would also conflict at linux-next.
Mauro Carvalho Chehab (29): docs: devices.rst: better reference documentation docs docs: dev-tools: kunit: don't use a table for docs name docs: admin-guide: pm: avoid using ReST :doc:`foo` markup docs: admin-guide: hw-vuln: avoid using ReST :doc:`foo` markup docs: admin-guide: sysctl: avoid using ReST :doc:`foo` markup docs: block: biodoc.rst: avoid using ReST :doc:`foo` markup docs: bpf: bpf_lsm.rst: avoid using ReST :doc:`foo` markup docs: core-api: avoid using ReST :doc:`foo` markup docs: dev-tools: testing-overview.rst: avoid using ReST :doc:`foo` markup docs: dev-tools: kunit: avoid using ReST :doc:`foo` markup docs: devicetree: bindings: submitting-patches.rst: avoid using ReST :doc:`foo` markup docs: doc-guide: avoid using ReST :doc:`foo` markup docs: driver-api: avoid using ReST :doc:`foo` markup docs: driver-api: gpio: using-gpio.rst: avoid using ReST :doc:`foo` markup docs: driver-api: surface_aggregator: avoid using ReST :doc:`foo` markup docs: driver-api: usb: avoid using ReST :doc:`foo` markup docs: firmware-guide: acpi: avoid using ReST :doc:`foo` markup docs: i2c: avoid using ReST :doc:`foo` markup docs: kernel-hacking: hacking.rst: avoid using ReST :doc:`foo` markup docs: networking: devlink: avoid using ReST :doc:`foo` markup docs: PCI: endpoint: pci-endpoint-cfs.rst: avoid using ReST :doc:`foo` markup docs: PCI: pci.rst: avoid using ReST :doc:`foo` markup docs: process: submitting-patches.rst: avoid using ReST :doc:`foo` markup docs: security: landlock.rst: avoid using ReST :doc:`foo` markup docs: trace: coresight: coresight.rst: avoid using ReST :doc:`foo` markup docs: trace: ftrace.rst: avoid using ReST :doc:`foo` markup docs: userspace-api: landlock.rst: avoid using ReST :doc:`foo` markup docs: virt: kvm: s390-pv-boot.rst: avoid using ReST :doc:`foo` markup docs: x86: avoid using ReST :doc:`foo` markup
.../PCI/endpoint/pci-endpoint-cfs.rst | 2 +- Documentation/PCI/pci.rst | 6 +-- .../special-register-buffer-data-sampling.rst | 3 +- Documentation/admin-guide/pm/intel_idle.rst | 16 +++++--- Documentation/admin-guide/pm/intel_pstate.rst | 9 +++-- Documentation/admin-guide/sysctl/abi.rst | 2 +- Documentation/admin-guide/sysctl/kernel.rst | 37 ++++++++++--------- Documentation/block/biodoc.rst | 2 +- Documentation/bpf/bpf_lsm.rst | 13 ++++--- .../core-api/bus-virt-phys-mapping.rst | 2 +- Documentation/core-api/dma-api.rst | 5 ++- Documentation/core-api/dma-isa-lpc.rst | 2 +- Documentation/core-api/index.rst | 4 +- Documentation/dev-tools/kunit/api/index.rst | 8 ++-- Documentation/dev-tools/kunit/faq.rst | 2 +- Documentation/dev-tools/kunit/index.rst | 14 +++---- Documentation/dev-tools/kunit/start.rst | 4 +- Documentation/dev-tools/kunit/tips.rst | 5 ++- Documentation/dev-tools/kunit/usage.rst | 8 ++-- Documentation/dev-tools/testing-overview.rst | 16 ++++---- .../bindings/submitting-patches.rst | 11 +++--- Documentation/doc-guide/contributing.rst | 8 ++-- Documentation/driver-api/gpio/using-gpio.rst | 4 +- Documentation/driver-api/ioctl.rst | 2 +- Documentation/driver-api/pm/devices.rst | 8 ++-- .../surface_aggregator/clients/index.rst | 3 +- .../surface_aggregator/internal.rst | 15 ++++---- .../surface_aggregator/overview.rst | 6 ++- Documentation/driver-api/usb/dma.rst | 6 +-- .../acpi/dsd/data-node-references.rst | 3 +- .../firmware-guide/acpi/dsd/graph.rst | 2 +- .../firmware-guide/acpi/enumeration.rst | 7 ++-- Documentation/i2c/instantiating-devices.rst | 2 +- Documentation/i2c/old-module-parameters.rst | 3 +- Documentation/i2c/smbus-protocol.rst | 4 +- Documentation/kernel-hacking/hacking.rst | 4 +- .../networking/devlink/devlink-region.rst | 2 +- .../networking/devlink/devlink-trap.rst | 4 +- Documentation/process/submitting-patches.rst | 32 ++++++++-------- Documentation/security/landlock.rst | 3 +- Documentation/trace/coresight/coresight.rst | 8 ++-- Documentation/trace/ftrace.rst | 2 +- Documentation/userspace-api/landlock.rst | 11 +++--- Documentation/virt/kvm/s390-pv-boot.rst | 2 +- Documentation/x86/boot.rst | 4 +- Documentation/x86/mtrr.rst | 2 +- 46 files changed, 171 insertions(+), 147 deletions(-)
The :doc:`foo` tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:`foo`.
Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org --- Documentation/trace/coresight/coresight.rst | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/Documentation/trace/coresight/coresight.rst b/Documentation/trace/coresight/coresight.rst index 169749efd8d1..1ec8dc35b1d8 100644 --- a/Documentation/trace/coresight/coresight.rst +++ b/Documentation/trace/coresight/coresight.rst @@ -315,7 +315,8 @@ intermediate links as required.
Note: ``cti_sys0`` appears in two of the connections lists above. CTIs can connect to multiple devices and are arranged in a star topology -via the CTM. See (:doc:`coresight-ect`) [#fourth]_ for further details. +via the CTM. See (Documentation/trace/coresight/coresight-ect.rst) +[#fourth]_ for further details. Looking at this device we see 4 connections::
linaro-developer:~# ls -l /sys/bus/coresight/devices/cti_sys0/connections @@ -606,7 +607,8 @@ interface provided for that purpose by the generic STM API:: crw------- 1 root root 10, 61 Jan 3 18:11 /dev/stm0 root@genericarmv8:~#
-Details on how to use the generic STM API can be found here:- :doc:`../stm` [#second]_. +Details on how to use the generic STM API can be found here: +- Documentation/trace/stm.rst [#second]_.
The CTI & CTM Modules --------------------- @@ -616,7 +618,7 @@ individual CTIs and components, and can propagate these between all CTIs via channels on the CTM (Cross Trigger Matrix).
A separate documentation file is provided to explain the use of these devices. -(:doc:`coresight-ect`) [#fourth]_. +(Documentation/trace/coresight/coresight-ect.rst) [#fourth]_.
.. [#first] Documentation/ABI/testing/sysfs-bus-coresight-devices-stm
On Wed, Jun 16, 2021 at 08:27:40AM +0200, Mauro Carvalho Chehab wrote:
The :doc:`foo` tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:`foo`.
Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org
Documentation/trace/coresight/coresight.rst | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
Reviewed-by: Mathieu Poirier mathieu.poirier@linaro.org
diff --git a/Documentation/trace/coresight/coresight.rst b/Documentation/trace/coresight/coresight.rst index 169749efd8d1..1ec8dc35b1d8 100644 --- a/Documentation/trace/coresight/coresight.rst +++ b/Documentation/trace/coresight/coresight.rst @@ -315,7 +315,8 @@ intermediate links as required. Note: ``cti_sys0`` appears in two of the connections lists above. CTIs can connect to multiple devices and are arranged in a star topology -via the CTM. See (:doc:`coresight-ect`) [#fourth]_ for further details. +via the CTM. See (Documentation/trace/coresight/coresight-ect.rst) +[#fourth]_ for further details. Looking at this device we see 4 connections:: linaro-developer:~# ls -l /sys/bus/coresight/devices/cti_sys0/connections @@ -606,7 +607,8 @@ interface provided for that purpose by the generic STM API:: crw------- 1 root root 10, 61 Jan 3 18:11 /dev/stm0 root@genericarmv8:~# -Details on how to use the generic STM API can be found here:- :doc:`../stm` [#second]_. +Details on how to use the generic STM API can be found here: +- Documentation/trace/stm.rst [#second]_. The CTI & CTM Modules
@@ -616,7 +618,7 @@ individual CTIs and components, and can propagate these between all CTIs via channels on the CTM (Cross Trigger Matrix). A separate documentation file is provided to explain the use of these devices. -(:doc:`coresight-ect`) [#fourth]_. +(Documentation/trace/coresight/coresight-ect.rst) [#fourth]_. .. [#first] Documentation/ABI/testing/sysfs-bus-coresight-devices-stm -- 2.31.1
Mauro Carvalho Chehab mchehab+huawei@kernel.org writes:
(Maintainers bcc, to avoid too many recipient troubles)
As discussed at: https://lore.kernel.org/linux-doc/871r9k6rmy.fsf@meer.lwn.net/
It is better to avoid using :doc:`foo` to refer to Documentation/foo.rst, as the automarkup.py extension should handle it automatically, on most cases.
I've applied the set, thanks.
jon