In our hardware design, by combining a funnel and a replicator, it implement a hardware device with one-to-one correspondence between output ports and input ports. The programming usage on this device is the same as funnel. The software uses a funnel and a static replicator to implement the driver of this device. Since original funnels only support a single output connection and original replicator only support a single input connection, the code needs to be modified to support this new feature. The following is a typical topology diagram of multi-port output mechanism. |----------| |---------| |----------| |---------| | TPDM 0 | | Source0 | | Source 1 | | TPDM 1 | |----------| |---------| |----------| |---------| | | | | | | | | | --------- | | | | | | | | | | | | | | | -------------/ ---------------------- | \ Funnel 0 / | | ----------- | ------------------------------ | | | | | | ------------------/ \ Funnel 1 / ----| --------------/ | | |----> Combine a funnel and a | | static replicator /-----------------\ | / replicator 0 \ ----| /---------------------\ | | | | | |-----------| | |---------| | | |TPDM0 |TPDM1 | -----------------/ | \ TPDA 0 / | -------------/ | | | | |Source0/1 | -------------------------------/ \ Funnel 2 / ---------------------------/
Changes in V7: 1. Correct the use of incorrect characters. -- Suzuki K Poulose 2. Rebase the series on v6.13-rc1 -- Suzuki K Poulose
Changes in V6: 1. Optimize the prompt content of the warning log when the filter handle is not a trace source. -- Suzuki K Poulose 2. Reset the filter device and fwnode if it is not a trace source. -- Suzuki K Poulose
Changes in V5: 1. Replace "filter-src" with "filter-source" in the dt-binding document. -- Suzuki K Poulose 2. Optimize the comments of the patch "coresight: Add support for trace filtering by source" due to bad example. -- Suzuki K Poulose 3. Correct spelling errors in the patch "coresight: Add support for trace filtering by source". -- Suzuki K Poulose 4. Optimize the function "coresight_blocks_source". -- Suzuki K Poulose 5. Add { } in the function "of_coresight_parse_endpoint". -- Suzuki K Poulose 6. Adjust the order of the patches. -- Suzuki K Poulose 7. Adjust the alignment in "coresight-platform.c". -- Suzuki K Poulose
Changes in V4: 1. Use "coresight_get_source(path)" in the function "coresight_disable_path_from" instead of explicitly passing the source. -- Suzuki K Poulose 2. Optimize the order of the input parameters for "_coresight_build_path". -- Suzuki K Poulose 3. Reuse the method "coresight_block_source" in "_coresight_build_path". -- Suzuki K Poulose 4. Remove the unnecessary () in "coresight_build_path". -- Suzuki K Poulose 5. Add a helper to check if a device is SOURCE. -- Suzuki K Poulose 6. Adjust the posistion of setting "still_orphan" in "coresight_build_path". -- Suzuki K Poulose
Changes in V3: 1. Rename the function "coresight_source_filter" to "coresight_block_source". And refine this function. -- Suzuki K Poulose 2. Rename the parameters of the function "coresight_find_out_connection" to avoid confusion. -- Suzuki K Poulose 3. Get the source of path in "coresight_enable_path" and "coresight_disable_path". -- Suzuki K Poulose 4. Fix filter source device before skip the port in "coresight_orphan_match". -- Suzuki K Poulose 5. Make sure the device still orphan if whter is a filter source firmware node but the filter source device is null. -- Suzuki K Poulose 6. Walk through the entire coresight bus and fixup the "filter_src_dev" if the source is being removed. -- Suzuki K Poulose 7. Refine the commit description of patch#2. -- Suzuki K Poulose 8. Fix the warning reported by kernel test robot. -- kernel test robot. 9. Use the source device directly if the port has a hardcoded filter in "tpda_get_element_size". -- Suzuki K Poulose
Changes in V2: 1. Change the reference for endpoint property in dt-binding. -- Krzysztof Kozlowski 2. Change the property name "filter_src" to "filter-src". -- Krzysztof Kozlowski 3. Fix the errors in running 'make dt_binding_check'. -- Rob Herring 4. Pass in the source parameter instead of path. -- Suzuki K Poulose 5. Reset the "filter_src_dev" if the "src" csdev is being removed. -- Suzuki K Poulose 6. Add a warning if the "filter_src_dev" is of not the type DEV_TYPE_SOURCE. -- Suzuki K Poulose 7. Optimize the procedure for handling all possible cases. -- Suzuki K Poulose
Changes in V1: 1. Add a static replicator connect to a funnel to implement the correspondence between the output ports and the input ports on funnels. -- Suzuki K Poulose 2. Add filter_src_dev and filter_src_dev phandle to "coresight_connection" struct, and populate them if there is one. -- Suzuki K Poulose 3. To look at the phandle and then fixup/remove the filter_src device in fixup/remove connections. -- Suzuki K Poulose 4. When TPDA reads DSB/CMB element size, it is implemented by looking up filter src device in the connections. -- Suzuki K Poulose
Tao Zhang (4): dt-bindings: arm: qcom,coresight-static-replicator: Add property for source filtering coresight: Add a helper to check if a device is source coresight: Add support for trace filtering by source coresight-tpda: Optimize the function of reading element size
.../arm/arm,coresight-static-replicator.yaml | 19 ++- drivers/hwtracing/coresight/coresight-core.c | 113 +++++++++++++++--- .../hwtracing/coresight/coresight-platform.c | 21 ++++ drivers/hwtracing/coresight/coresight-tpda.c | 13 +- include/linux/coresight.h | 12 +- 5 files changed, 155 insertions(+), 23 deletions(-)
The is some "magic" hard coded filtering in the replicators, which only passes through trace from a particular "source". Add a new property "filter-source" to label a phandle to the coresight trace source device matching the hard coded filtering for the port.
Signed-off-by: Tao Zhang quic_taozha@quicinc.com Acked-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- .../arm/arm,coresight-static-replicator.yaml | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml index 1892a091ac35..a6f793ea03b6 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml @@ -45,7 +45,22 @@ properties: patternProperties: '^port@[01]$': description: Output connections to CoreSight Trace bus - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + filter-source: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the coresight trace source device matching the + hard coded filtering for this port + + remote-endpoint: true
required: - compatible @@ -72,6 +87,7 @@ examples: reg = <0>; replicator_out_port0: endpoint { remote-endpoint = <&etb_in_port>; + filter-source = <&tpdm_video>; }; };
@@ -79,6 +95,7 @@ examples: reg = <1>; replicator_out_port1: endpoint { remote-endpoint = <&tpiu_in_port>; + filter-source = <&tpdm_mdss>; }; }; };
Since there are a lot of places in the code to check whether the device is source, add a helper to check it.
Signed-off-by: Tao Zhang quic_taozha@quicinc.com --- drivers/hwtracing/coresight/coresight-tpda.c | 2 +- include/linux/coresight.h | 7 ++++++- 2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-tpda.c b/drivers/hwtracing/coresight/coresight-tpda.c index 4ec676bea1ce..ab94067c0ed3 100644 --- a/drivers/hwtracing/coresight/coresight-tpda.c +++ b/drivers/hwtracing/coresight/coresight-tpda.c @@ -24,7 +24,7 @@ DEFINE_CORESIGHT_DEVLIST(tpda_devs, "tpda");
static bool coresight_device_is_tpdm(struct coresight_device *csdev) { - return (csdev->type == CORESIGHT_DEV_TYPE_SOURCE) && + return (coresight_is_device_source(csdev)) && (csdev->subtype.source_subtype == CORESIGHT_DEV_SUBTYPE_SOURCE_TPDM); } diff --git a/include/linux/coresight.h b/include/linux/coresight.h index 055ce5cd5c44..c50d128e8d93 100644 --- a/include/linux/coresight.h +++ b/include/linux/coresight.h @@ -588,9 +588,14 @@ static inline void csdev_access_write64(struct csdev_access *csa, u64 val, u32 o } #endif /* CONFIG_64BIT */
+static inline bool coresight_is_device_source(struct coresight_device *csdev) +{ + return csdev && (csdev->type == CORESIGHT_DEV_TYPE_SOURCE); +} + static inline bool coresight_is_percpu_source(struct coresight_device *csdev) { - return csdev && (csdev->type == CORESIGHT_DEV_TYPE_SOURCE) && + return csdev && coresight_is_device_source(csdev) && (csdev->subtype.source_subtype == CORESIGHT_DEV_SUBTYPE_SOURCE_PROC); }
Some replicators have hard coded filtering of "trace" data, based on the source device. This is different from the trace filtering based on TraceID, available in the standard programmable replicators. e.g., Qualcomm replicators have filtering based on custom trace protocol format and is not programmable.
The source device could be connected to the replicator via intermediate components (e.g., a funnel). Thus we need platform information from the firmware tables to decide the source device corresponding to a given output port from the replicator. Given this affects "trace path building" and traversing the path back from the sink to source, add the concept of "filtering by source" to the generic coresight connection.
The specified source will be marked like below in the Devicetree. test-replicator { ... ... ... ... out-ports { ... ... ... ... port@0 { reg = <0>; xyz: endpoint { remote-endpoint = <&zyx>; filter-source = <&source_1>; <-- To specify the source to }; be filtered out here. };
port@1 { reg = <1>; abc: endpoint { remote-endpoint = <&cba>; filter-source = <&source_2>; <-- To specify the source to }; be filtered out here. }; }; };
Signed-off-by: Tao Zhang quic_taozha@quicinc.com --- drivers/hwtracing/coresight/coresight-core.c | 113 +++++++++++++++--- .../hwtracing/coresight/coresight-platform.c | 21 ++++ include/linux/coresight.h | 5 + 3 files changed, 120 insertions(+), 19 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-core.c b/drivers/hwtracing/coresight/coresight-core.c index ea38ecf26fcb..0a9380350fb5 100644 --- a/drivers/hwtracing/coresight/coresight-core.c +++ b/drivers/hwtracing/coresight/coresight-core.c @@ -75,22 +75,54 @@ struct coresight_device *coresight_get_percpu_sink(int cpu) } EXPORT_SYMBOL_GPL(coresight_get_percpu_sink);
+static struct coresight_device *coresight_get_source(struct list_head *path) +{ + struct coresight_device *csdev; + + if (!path) + return NULL; + + csdev = list_first_entry(path, struct coresight_node, link)->csdev; + if (!coresight_is_device_source(csdev)) + return NULL; + + return csdev; +} + +/** + * coresight_blocks_source - checks whether the connection matches the source + * of path if connection is bound to specific source. + * @src: The source device of the trace path + * @conn: The connection of one outport + * + * Return false if the connection doesn't have a source binded or source of the + * path matches the source binds to connection. + */ +static bool coresight_blocks_source(struct coresight_device *src, + struct coresight_connection *conn) +{ + return conn->filter_src_fwnode && (conn->filter_src_dev != src); +} + static struct coresight_connection * -coresight_find_out_connection(struct coresight_device *src_dev, - struct coresight_device *dest_dev) +coresight_find_out_connection(struct coresight_device *csdev, + struct coresight_device *out_dev, + struct coresight_device *trace_src) { int i; struct coresight_connection *conn;
- for (i = 0; i < src_dev->pdata->nr_outconns; i++) { - conn = src_dev->pdata->out_conns[i]; - if (conn->dest_dev == dest_dev) + for (i = 0; i < csdev->pdata->nr_outconns; i++) { + conn = csdev->pdata->out_conns[i]; + if (coresight_blocks_source(trace_src, conn)) + continue; + if (conn->dest_dev == out_dev) return conn; }
- dev_err(&src_dev->dev, - "couldn't find output connection, src_dev: %s, dest_dev: %s\n", - dev_name(&src_dev->dev), dev_name(&dest_dev->dev)); + dev_err(&csdev->dev, + "couldn't find output connection, csdev: %s, out_dev: %s\n", + dev_name(&csdev->dev), dev_name(&out_dev->dev));
return ERR_PTR(-ENODEV); } @@ -251,7 +283,8 @@ static void coresight_disable_sink(struct coresight_device *csdev)
static int coresight_enable_link(struct coresight_device *csdev, struct coresight_device *parent, - struct coresight_device *child) + struct coresight_device *child, + struct coresight_device *source) { int link_subtype; struct coresight_connection *inconn, *outconn; @@ -259,8 +292,8 @@ static int coresight_enable_link(struct coresight_device *csdev, if (!parent || !child) return -EINVAL;
- inconn = coresight_find_out_connection(parent, csdev); - outconn = coresight_find_out_connection(csdev, child); + inconn = coresight_find_out_connection(parent, csdev, source); + outconn = coresight_find_out_connection(csdev, child, source); link_subtype = csdev->subtype.link_subtype;
if (link_subtype == CORESIGHT_DEV_SUBTYPE_LINK_MERG && IS_ERR(inconn)) @@ -273,15 +306,16 @@ static int coresight_enable_link(struct coresight_device *csdev,
static void coresight_disable_link(struct coresight_device *csdev, struct coresight_device *parent, - struct coresight_device *child) + struct coresight_device *child, + struct coresight_device *source) { struct coresight_connection *inconn, *outconn;
if (!parent || !child) return;
- inconn = coresight_find_out_connection(parent, csdev); - outconn = coresight_find_out_connection(csdev, child); + inconn = coresight_find_out_connection(parent, csdev, source); + outconn = coresight_find_out_connection(csdev, child, source);
link_ops(csdev)->disable(csdev, inconn, outconn); } @@ -375,7 +409,8 @@ static void coresight_disable_path_from(struct list_head *path, case CORESIGHT_DEV_TYPE_LINK: parent = list_prev_entry(nd, link)->csdev; child = list_next_entry(nd, link)->csdev; - coresight_disable_link(csdev, parent, child); + coresight_disable_link(csdev, parent, child, + coresight_get_source(path)); break; default: break; @@ -418,7 +453,9 @@ int coresight_enable_path(struct list_head *path, enum cs_mode mode, u32 type; struct coresight_node *nd; struct coresight_device *csdev, *parent, *child; + struct coresight_device *source;
+ source = coresight_get_source(path); list_for_each_entry_reverse(nd, path, link) { csdev = nd->csdev; type = csdev->type; @@ -456,7 +493,7 @@ int coresight_enable_path(struct list_head *path, enum cs_mode mode, case CORESIGHT_DEV_TYPE_LINK: parent = list_prev_entry(nd, link)->csdev; child = list_next_entry(nd, link)->csdev; - ret = coresight_enable_link(csdev, parent, child); + ret = coresight_enable_link(csdev, parent, child, source); if (ret) goto err; break; @@ -619,6 +656,7 @@ static void coresight_drop_device(struct coresight_device *csdev) /** * _coresight_build_path - recursively build a path from a @csdev to a sink. * @csdev: The device to start from. + * @source: The trace source device of the path. * @sink: The final sink we want in this path. * @path: The list to add devices to. * @@ -628,6 +666,7 @@ static void coresight_drop_device(struct coresight_device *csdev) * the source is the first device and the sink the last one. */ static int _coresight_build_path(struct coresight_device *csdev, + struct coresight_device *source, struct coresight_device *sink, struct list_head *path) { @@ -641,7 +680,7 @@ static int _coresight_build_path(struct coresight_device *csdev,
if (coresight_is_percpu_source(csdev) && coresight_is_percpu_sink(sink) && sink == per_cpu(csdev_sink, source_ops(csdev)->cpu_id(csdev))) { - if (_coresight_build_path(sink, sink, path) == 0) { + if (_coresight_build_path(sink, source, sink, path) == 0) { found = true; goto out; } @@ -652,8 +691,12 @@ static int _coresight_build_path(struct coresight_device *csdev, struct coresight_device *child_dev;
child_dev = csdev->pdata->out_conns[i]->dest_dev; + + if (coresight_blocks_source(source, csdev->pdata->out_conns[i])) + continue; + if (child_dev && - _coresight_build_path(child_dev, sink, path) == 0) { + _coresight_build_path(child_dev, source, sink, path) == 0) { found = true; break; } @@ -698,7 +741,7 @@ struct list_head *coresight_build_path(struct coresight_device *source,
INIT_LIST_HEAD(path);
- rc = _coresight_build_path(source, sink, path); + rc = _coresight_build_path(source, source, sink, path); if (rc) { kfree(path); return ERR_PTR(rc); @@ -927,6 +970,16 @@ static int coresight_orphan_match(struct device *dev, void *data) for (i = 0; i < src_csdev->pdata->nr_outconns; i++) { conn = src_csdev->pdata->out_conns[i];
+ /* Fix filter source device before skip the port */ + if (conn->filter_src_fwnode && !conn->filter_src_dev) { + if (dst_csdev && + (conn->filter_src_fwnode == dst_csdev->dev.fwnode) && + !WARN_ON_ONCE(!coresight_is_device_source(dst_csdev))) + conn->filter_src_dev = dst_csdev; + else + still_orphan = true; + } + /* Skip the port if it's already connected. */ if (conn->dest_dev) continue; @@ -977,18 +1030,40 @@ static int coresight_fixup_orphan_conns(struct coresight_device *csdev) csdev, coresight_orphan_match); }
+static int coresight_clear_filter_source(struct device *dev, void *data) +{ + int i; + struct coresight_device *source = data; + struct coresight_device *csdev = to_coresight_device(dev); + + for (i = 0; i < csdev->pdata->nr_outconns; ++i) { + if (csdev->pdata->out_conns[i]->filter_src_dev == source) + csdev->pdata->out_conns[i]->filter_src_dev = NULL; + } + return 0; +} + /* coresight_remove_conns - Remove other device's references to this device */ static void coresight_remove_conns(struct coresight_device *csdev) { int i, j; struct coresight_connection *conn;
+ if (coresight_is_device_source(csdev)) + bus_for_each_dev(&coresight_bustype, NULL, csdev, + coresight_clear_filter_source); + /* * Remove the input connection references from the destination device * for each output connection. */ for (i = 0; i < csdev->pdata->nr_outconns; i++) { conn = csdev->pdata->out_conns[i]; + if (conn->filter_src_fwnode) { + conn->filter_src_dev = NULL; + fwnode_handle_put(conn->filter_src_fwnode); + } + if (!conn->dest_dev) continue;
diff --git a/drivers/hwtracing/coresight/coresight-platform.c b/drivers/hwtracing/coresight/coresight-platform.c index 633d96b9577a..8192ba3279f0 100644 --- a/drivers/hwtracing/coresight/coresight-platform.c +++ b/drivers/hwtracing/coresight/coresight-platform.c @@ -243,6 +243,27 @@ static int of_coresight_parse_endpoint(struct device *dev, conn.dest_fwnode = fwnode_handle_get(rdev_fwnode); conn.dest_port = rendpoint.port;
+ /* + * Get the firmware node of the filter source through the + * reference. This could be used to filter the source in + * building path. + */ + conn.filter_src_fwnode = + fwnode_find_reference(&ep->fwnode, "filter-source", 0); + if (IS_ERR(conn.filter_src_fwnode)) { + conn.filter_src_fwnode = NULL; + } else { + conn.filter_src_dev = + coresight_find_csdev_by_fwnode(conn.filter_src_fwnode); + if (conn.filter_src_dev && + !coresight_is_device_source(conn.filter_src_dev)) { + dev_warn(dev, "port %d: Filter handle is not a trace source : %s\n", + conn.src_port, dev_name(&conn.filter_src_dev->dev)); + conn.filter_src_dev = NULL; + conn.filter_src_fwnode = NULL; + } + } + new_conn = coresight_add_out_conn(dev, pdata, &conn); if (IS_ERR_VALUE(new_conn)) { fwnode_handle_put(conn.dest_fwnode); diff --git a/include/linux/coresight.h b/include/linux/coresight.h index c50d128e8d93..17276965ff1d 100644 --- a/include/linux/coresight.h +++ b/include/linux/coresight.h @@ -172,6 +172,9 @@ struct coresight_desc { * @dest_dev: a @coresight_device representation of the component connected to @src_port. NULL until the device is created * @link: Representation of the connection as a sysfs link. + * @filter_src_fwnode: filter source component's fwnode handle. + * @filter_src_dev: a @coresight_device representation of the component that + needs to be filtered. * * The full connection structure looks like this, where in_conns store * references to same connection as the source device's out_conns. @@ -200,6 +203,8 @@ struct coresight_connection { struct coresight_device *dest_dev; struct coresight_sysfs_link *link; struct coresight_device *src_dev; + struct fwnode_handle *filter_src_fwnode; + struct coresight_device *filter_src_dev; int src_refcnt; int dest_refcnt; };
Since the new funnel device supports multi-port output scenarios, there may be more than one TPDM connected to one TPDA. In this way, when reading the element size of the TPDM, TPDA driver needs to find the expected TPDM corresponding to the filter source. When TPDA finds a TPDM or a filter source from a input connection, it will read the Devicetree to get the expected TPDM's element size.
Signed-off-by: Tao Zhang quic_taozha@quicinc.com --- drivers/hwtracing/coresight/coresight-tpda.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/hwtracing/coresight/coresight-tpda.c b/drivers/hwtracing/coresight/coresight-tpda.c index ab94067c0ed3..189a4abc2561 100644 --- a/drivers/hwtracing/coresight/coresight-tpda.c +++ b/drivers/hwtracing/coresight/coresight-tpda.c @@ -110,6 +110,16 @@ static int tpda_get_element_size(struct tpda_drvdata *drvdata, csdev->pdata->in_conns[i]->dest_port != inport) continue;
+ /* + * If this port has a hardcoded filter, use the source + * device directly. + */ + if (csdev->pdata->in_conns[i]->filter_src_fwnode) { + in = csdev->pdata->in_conns[i]->filter_src_dev; + if (!in) + continue; + } + if (coresight_device_is_tpdm(in)) { if (drvdata->dsb_esize || drvdata->cmb_esize) return -EEXIST; @@ -124,7 +134,6 @@ static int tpda_get_element_size(struct tpda_drvdata *drvdata, } }
- return rc; }
On Fri, 13 Dec 2024 18:07:27 +0800, Tao Zhang wrote:
In our hardware design, by combining a funnel and a replicator, it implement a hardware device with one-to-one correspondence between output ports and input ports. The programming usage on this device is the same as funnel. The software uses a funnel and a static replicator to implement the driver of this device. Since original funnels only support a single output connection and original replicator only support a single input connection, the code needs to be modified to support this new feature. The following is a typical topology diagram of multi-port output mechanism. |----------| |---------| |----------| |---------| | TPDM 0 | | Source0 | | Source 1 | | TPDM 1 | |----------| |---------| |----------| |---------| | | | | | | | | | --------- | | | | | | | | | | | | | | | -------------/ ---------------------- | \ Funnel 0 / | | ----------- | ------------------------------ | | | | | | ------------------/ \ Funnel 1 / ----| --------------/ | | |----> Combine a funnel and a | | static replicator /-----------------\ | / replicator 0 \ ----| /---------------------\ | | | | | |-----------| | |---------| | | |TPDM0 |TPDM1 | -----------------/ | \ TPDA 0 / | -------------/ | | | | |Source0/1 | -------------------------------/ \ Funnel 2 / ---------------------------/
[...]
Applied, thanks!
[1/4] dt-bindings: arm: qcom,coresight-static-replicator: Add property for source filtering https://git.kernel.org/coresight/c/2a0bc219272b [2/4] coresight: Add a helper to check if a device is source https://git.kernel.org/coresight/c/62374ce1876b [3/4] coresight: Add support for trace filtering by source https://git.kernel.org/coresight/c/ec9903d6cc34 [4/4] coresight-tpda: Optimize the function of reading element size https://git.kernel.org/coresight/c/56e14a21cee4
Best regards,