Kernel-build-reports March 2014

kernel-build-reports@lists.linaro.org

15 participants
336 discussions

mainline boot: 48 pass, 0 fail (v3.14-rc8-7-g632b06a)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc8-7-g632b06a Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm 0 min 15.4 sec: PASS (with 1 Warnings) legacy,da850evm 0 min 14.4 sec: PASS (with 1 Warnings) omap2plus_defconfig ------------------- legacy,3730xm 0 min 50.8 sec: PASS am335x-boneblack 0 min 25.5 sec: PASS omap3-beagle-xm 1 min 6.9 sec: PASS legacy,3530beagle 0 min 35.5 sec: PASS (with 1 Warnings) omap4-panda 1 min 6.9 sec: PASS omap3-overo-tobi 0 min 22.9 sec: PASS (with 1 Warnings) am335x-bone 0 min 27.6 sec: PASS omap3-overo-storm-tobi 0 min 25.3 sec: PASS omap5-uevm 1 min 6.8 sec: PASS (with 1 Warnings) omap4-panda-es 1 min 6.6 sec: PASS legacy,3730storm 0 min 24.0 sec: PASS legacy,3530overo 0 min 21.2 sec: PASS (with 1 Warnings) multi_lpae_defconfig -------------------- omap5-uevm 1 min 45.3 sec: PASS (with 1 Warnings) sun7i-a20-cubieboard2 0 min 14.5 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.1 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.9 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.9 sec: PASS imx6q-wandboard 0 min 17.4 sec: PASS msm_defconfig ------------- qcom-apq8074-dragonboard 0 min 15.0 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 23.0 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 12.9 sec: PASS sun4i-a10-cubieboard 0 min 17.3 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 29.7 sec: PASS multi_v7_defconfig ------------------ ste-snowball 1 min 17.3 sec: PASS tegra30-beaver 0 min 20.1 sec: PASS am335x-boneblack 0 min 23.3 sec: PASS omap3-beagle-xm 0 min 50.0 sec: PASS sun7i-a20-cubieboard2 0 min 14.4 sec: PASS armada-370-mirabox 0 min 22.0 sec: PASS omap4-panda 0 min 57.7 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.9 sec: PASS sun4i-a10-cubieboard 0 min 14.3 sec: PASS bcm28155-ap 0 min 26.4 sec: PASS omap3-overo-tobi 0 min 21.6 sec: PASS (with 1 Warnings) imx6dl-wandboard,wand-solo 0 min 18.1 sec: PASS am335x-bone 0 min 26.1 sec: PASS omap3-overo-storm-tobi 0 min 25.0 sec: PASS omap5-uevm 1 min 43.5 sec: PASS (with 1 Warnings) imx6q-wandboard 0 min 17.6 sec: PASS omap4-panda-es 0 min 56.1 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.2 sec: PASS u8500_defconfig --------------- ste-snowball 0 min 33.3 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.5 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 16.8 sec: PASS mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 0 min 22.2 sec: PASS armada-370-mirabox 0 min 20.4 sec: PASS

10 years, 3 months

mainline build: 7 warnings 0 failures (mainline/v3.14-rc8-9-gfce7fc7)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: fce7fc7 fs: remove now stale label in anon_inode_init() Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.14-rc8-9-gfce7fc7/ Runtime: 24m 36s Passed: 123 Failed: 0 Warnings: 7 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/staging/imx-drm/imx-drm-core.c:87:25: warning: unused variable 'imxdrm' [-Wunused-variable] 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) Section mismatches:

10 years, 3 months

mainline boot: 10 passed 4 failed (mainline/v3.14-rc8-8-gd6f2589)

by Olof's autobooter

Failed boards: beaver multi_v7_defconfig : FAILED 2:05.37 cubie2 multi_v7_defconfig : FAILED 3:25.73 snowball u8500_defconfig : FAILED 1:33.85 snowball multi_v7_defconfig : FAILED 1:58.56 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:26.45 arndale exynos_defconfig : passed 1:04.11 beaver tegra_defconfig : passed 1:06.23 cubie sunxi_defconfig : passed 0:54.70 cubie multi_v7_defconfig : passed 1:13.13 cubie2 sunxi_defconfig : passed 1:09.59 cubie2 multi_lpae_defconfig : passed 1:03.60 cubox dove_defconfig : passed 1:14.44 seaboard tegra_defconfig : passed 1:03.15 seaboard multi_v7_defconfig : passed 1:09.37 Offline boards: bbb omap2plus_defconfig : OFFLINE 1:03.70 bbb multi_v7_defconfig : OFFLINE 1:03.78 capri bcm_defconfig : OFFLINE 1:03.73 capri multi_v7_defconfig : OFFLINE 1:03.70 dalmore tegra_defconfig : OFFLINE 1:03.97 dalmore multi_v7_defconfig : OFFLINE 1:03.75 dalmore multi_lpae_defconfig : OFFLINE 1:03.70 hummingboard imx_v6_v7_defconfig : OFFLINE 1:03.70 hummingboard multi_v7_defconfig : OFFLINE 1:03.71 omap5uevm omap2plus_defconfig : OFFLINE 1:03.81 omap5uevm multi_v7_defconfig : OFFLINE 1:03.70 omap5uevm multi_lpae_defconfig : OFFLINE 1:03.73 panda omap2plus_defconfig : OFFLINE 1:05.90 panda multi_v7_defconfig : OFFLINE 1:05.71 sama5 sama5_defconfig : OFFLINE 1:05.70 snow exynos_defconfig : OFFLINE 1:05.18 trimslice tegra_defconfig : OFFLINE 1:03.77 trimslice multi_v7_defconfig : OFFLINE 1:03.70 wandboard imx_v6_v7_defconfig : OFFLINE 1:03.77 wandboard multi_v7_defconfig : OFFLINE 1:03.74 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- Scanning mmc 1... MMC: no card present ** Bad device mmc 1 ** MMC: no card present ** Bad device mmc 1 ** MMC: no card present ** Bad device mmc 1 ** MMC: no card present ** Bad device mmc 1 ** mmc0(part 0) is current device Scanning mmc 0... ** File not found /boot.scr.uimg ** ** File not found /boot.scr ** ** File not found /boot/boot.scr.uimg ** ** File not found /boot/boot.scr ** (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found USB device 0: unknown device Waiting for Ethernet connection... node: beaver status: on done. BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 44 *** Unhandled DHCP Option in OFFER/ACK: 44 DHCP client bound to address 172.16.1.101 Using asx0 device TFTP from server 172.16.1.7; our IP address is 172.16.1.101 Filename 'boot.scr.uimg'. Load address: 0x90000000 Loading: * TFTP error: 'File not found' (1) Not retrying... Tegra30 (Beaver) # node: beaver status: on ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- Board: Cubieboard2 DRAM: 1024 MiB CPU: 960000000Hz, AXI/AHB/APB: 3/2/2 spl: not an uImage at 1600 U-Boot 2013.10-rc2-00709-g3977e12 (Oct 18 2013 - 16:12:20) Allwinner Technology CPU: Allwinner A20 (SUN7I) Board: Cubieboard2 I2C: ready DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 In: serial Out: serial Err: serial Net: emac Hit any key to stop autoboot: 3 2 1 0 reading uEnv.txt ** Unable to read file uEnv.txt ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** reading boot.scr ** Unable to read file boot.scr ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** reading script.bin ** Unable to read file script.bin ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** sun7i# node: cubie2 status: on node: cubie2 status: on ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- [ 18.263854] Bluetooth: L2CAP socket layer initialized [ 18.269012] Bluetooth: SCO (Voice Link) ver 0.6 [ 18.273529] Bluetooth: SCO socket layer initialized [ 18.278625] Bluetooth: RFCOMM TTY layer initialized [ 18.283569] Bluetooth: RFCOMM socket layer initialized [ 18.288726] Bluetooth: RFCOMM ver 1.11 [ 18.292510] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 18.297882] Bluetooth: BNEP filters: protocol multicast [ 18.303131] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 18.309509] NET: Registered protocol family 35 [ 18.314422] NET: Registered protocol family 37 [ 18.319061] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2 [ 18.327239] Registering SWP/SWPB emulation handler [ 18.339965] l2x0-prefetch: initialized. [ 18.347259] mcde_display_hdmi_init [ 18.351898] regulator_init_complete: LDO-USB: disabling [ 18.357299] regulator_init_complete: db8500-esram34: disabling [ 18.363250] regulator_init_complete: db8500-esram12: disabling [ 18.369720] ab8500-rtc ab8500-rtc.0: setting system clock to 2014-03-26 01:21:09 UTC (1395796869) [ 18.889953] IP-Config: Failed to open eth0 [ 18.894104] IP-Config: No network devices available. [ 18.901794] EXT3-fs (mmcblk0p3): error: couldn't mount because of unsupported optional features (240) [ 19.219970] EXT2-fs (mmcblk0p3): error: couldn't mount because of unsupported optional features (244) [ 19.649475] av8100_hdmi av8100_hdmi.1: HDMI display probed [ 19.748413] av8100 0-0070: chip version:2 [ 19.923919] EXT4-fs (mmcblk0p3): warning: maximal mount count reached, running e2fsck is recommended [ 19.936676] EXT4-fs (mmcblk0p3): recovery complete [ 19.944732] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 19.952941] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 19.960296] devtmpfs: mounted [ 19.963409] Freeing init memory: 216K [ 20.797363] Console: switching to colour frame buffer device 160x45 [ 20.881317] av8100_hdmi av8100_hdmi.1: Framebuffer created (av8100_hdmi) Last login: Sat Nov 30 23:19:53 UTC 2013 on tty1 Welcome to Linaro 11.09 (development branch) (GNU/Linux 2.6.38-1001-ux500 armv7l) * Documentation: https://wiki.linaro.org/ root@linaro-nano:~# ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 11.590942] [<c009bb0c>] (__atomic_notifier_call_chain+0x2c/0x54) from [<c009bb48>] (atomic_notifier_call_chain+0x14/0x18) [ 11.601989] [<c009bb48>] (atomic_notifier_call_chain+0x14/0x18) from [<c0049478>] (__switch_to+0x24/0x6c) [ 11.611572] Code: e12fff1e e92d41f0 e1a04002 e1a05001 (e5902000) [ 11.617706] ---[ end trace da227214a82491b7 ]--- [ 11.622344] Kernel panic - not syncing: Attempted to kill the idle task! [ 11.629058] [<c005082c>] (unwind_backtrace+0x0/0x118) from [<c04a3ba0>] (panic+0xf8/0x224) [ 11.637329] [<c04a3ba0>] (panic+0xf8/0x224) from [<c007c4ec>] (do_exit+0x5c/0x34c) [ 11.644927] [<c007c4ec>] (do_exit+0x5c/0x34c) from [<c004d924>] (die+0xe8/0xfc) [ 11.652252] [<c004d924>] (die+0xe8/0xfc) from [<c0054620>] (__do_kernel_fault+0x64/0x84) [ 11.660339] [<c0054620>] (__do_kernel_fault+0x64/0x84) from [<c005481c>] (do_page_fault+0x1dc/0x200) [ 11.669494] [<c005481c>] (do_page_fault+0x1dc/0x200) from [<c003e40c>] (do_DataAbort+0x30/0x98) [ 11.678192] [<c003e40c>] (do_DataAbort+0x30/0x98) from [<c0048e90>] (__dabt_svc+0x70/0xa0) [ 11.686462] Exception stack(0xdf865ec0 to 0xdf865f08) [ 11.691528] 5ec0: 00602574 00000002 df8b6000 ffffffff df8b6000 00000002 df864000 df96f900 [ 11.699707] 5ee0: c069d0c0 df84cc1c 00000000 df865fe4 00000000 df865f08 c009bb0c c009b764 [ 11.707855] 5f00: 60000013 ffffffff [ 11.711364] [<c0048e90>] (__dabt_svc+0x70/0xa0) from [<c009b764>] (notifier_call_chain+0xc/0x68) [ 11.720153] [<c009b764>] (notifier_call_chain+0xc/0x68) from [<c009bb0c>] (__atomic_notifier_call_chain+0x2c/0x54) [ 11.730499] [<c009bb0c>] (__atomic_notifier_call_chain+0x2c/0x54) from [<c009bb48>] (atomic_notifier_call_chain+0x14/0x18) [ 11.741546] [<c009bb48>] (atomic_notifier_call_chain+0x14/0x18) from [<c0049478>] (__switch_to+0x24/0x6c) [ 11.751129] CPU0: stopping [ 11.753845] [<c005082c>] (unwind_backtrace+0x0/0x118) from [<c003e370>] (do_IPI+0xb4/0x120) [ 11.762176] [<c003e370>] (do_IPI+0xb4/0x120) from [<c0048f0c>] (__irq_svc+0x4c/0xe8) [ 11.769927] Exception stack(0xdf839e88 to 0xdf839ed0) [ 11.774963] 9e80: df8cd384 df8b6000 df8b6000 df838000 df8cd384 df82e4e0 [ 11.783142] 9ea0: 00000000 df8b6000 df838000 00000089 00000014 df839ed4 c0bb2ee0 df839ed0 [ 11.791320] 9ec0: c04a55ac c0070b50 60000013 ffffffff [ 11.796417] [<c0048f0c>] (__irq_svc+0x4c/0xe8) from [<c0070b50>] (mutex_spin_on_owner+0x7c/0xbc) [ 11.805206] [<c0070b50>] (mutex_spin_on_owner+0x7c/0xbc) from [<c04a55ac>] (__mutex_lock_interruptible_slowpath+0x54/0x24c) [ 11.816345] [<c04a55ac>] (__mutex_lock_interruptible_slowpath+0x54/0x24c) from [<c04a5830>] (mutex_lock_interruptible+0x34/0x58) [ 11.827941] [<c04a5830>] (mutex_lock_interruptible+0x34/0x58) from [<c02c44e0>] (get_register_interruptible+0x20/0x70) [ 11.838653] [<c02c44e0>] (get_register_interruptible+0x20/0x70) from [<c02c4124>] (abx500_get_register_interruptible+0x4c/0x5c) [ 11.850158] [<c02c4124>] (abx500_get_register_interruptible+0x4c/0x5c) from [<c033c2ec>] (ab8500_charger_detect_usb_type+0x28/0x98) [ 11.861999] [<c033c2ec>] (ab8500_charger_detect_usb_type+0x28/0x98) from [<c033c3bc>] (ab8500_charger_detect_usb_type_work+0x60/0x78) [ 11.874023] [<c033c3bc>] (ab8500_charger_detect_usb_type_work+0x60/0x78) from [<c00908ec>] (process_one_work+0x27c/0x444) [ 11.884979] [<c00908ec>] (process_one_work+0x27c/0x444) from [<c0092b68>] (worker_thread+0x1c4/0x2c0) [ 11.894226] [<c0092b68>] (worker_thread+0x1c4/0x2c0) from [<c00961c0>] (kthread+0x7c/0x84) [ 11.902496] [<c00961c0>] (kthread+0x7c/0x84) from [<c004a7ac>] (kernel_thread_exit+0x0/0x8) ~$off # PYBOOT: Exception: panic

10 years, 3 months

mainline build: 130 warnings 0 failures (mainline/v3.14-rc8-8-gd6f2589)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: d6f2589 fs: Avoid userspace mounting anon_inodefs filesystem Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.14-rc8-8-gd6f2589/ Runtime: 29m 54s Passed: 123 Failed: 0 Warnings: 130 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/staging/imx-drm/imx-drm-core.c:87:25: warning: unused variable 'imxdrm' [-Wunused-variable] 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 123 fs/anon_inodes.c:189:1: warning: label 'err_exit' defined but not used [-Wunused-label] Section mismatches:

10 years, 3 months

mainline boot: 20 passed 0 failed (mainline/v3.14-rc8-7-g632b06a)

by Olof's autobooter

Failed boards: Successful boards: apc vt8500_v6_v7_defconfig : passed 1:24.03 arndale exynos_defconfig : passed 1:06.32 bbb omap2plus_defconfig : passed 1:36.75 bbb multi_v7_defconfig : passed 2:06.05 beaver tegra_defconfig : passed 1:06.61 beaver multi_v7_defconfig : passed 0:55.54 cubie sunxi_defconfig : passed 0:54.70 cubie multi_v7_defconfig : passed 1:07.92 cubie2 sunxi_defconfig : passed 1:06.90 cubie2 multi_v7_defconfig : passed 1:29.38 cubie2 multi_lpae_defconfig : passed 0:58.01 cubox dove_defconfig : passed 1:13.10 omap5uevm multi_v7_defconfig : warnings 1:38.77 seaboard tegra_defconfig : passed 1:01.11 seaboard multi_v7_defconfig : passed 1:10.23 snow exynos_defconfig : passed 1:23.80 snowball u8500_defconfig : passed 1:36.56 snowball multi_v7_defconfig : passed 2:12.61 trimslice tegra_defconfig : passed 0:59.54 trimslice multi_v7_defconfig : passed 1:17.49 Offline boards: capri bcm_defconfig : OFFLINE 1:04.09 capri multi_v7_defconfig : OFFLINE 1:03.80 dalmore tegra_defconfig : OFFLINE 1:03.86 dalmore multi_v7_defconfig : OFFLINE 1:03.81 dalmore multi_lpae_defconfig : OFFLINE 1:03.81 hummingboard imx_v6_v7_defconfig : OFFLINE 1:03.72 hummingboard multi_v7_defconfig : OFFLINE 1:03.83 omap5uevm omap2plus_defconfig : OFFLINE 3:07.94 omap5uevm multi_lpae_defconfig : OFFLINE 1:03.72 panda omap2plus_defconfig : OFFLINE 1:05.82 panda multi_v7_defconfig : OFFLINE 1:05.73 sama5 sama5_defconfig : OFFLINE 1:05.77 wandboard imx_v6_v7_defconfig : OFFLINE 1:03.76 wandboard multi_v7_defconfig : OFFLINE 1:03.72 Board legend is available at http://arm-soc.lixom.net/boards.html

10 years, 3 months

mainline build: 7 warnings 0 failures (mainline/v3.14-rc8-7-g632b06a)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 632b06a Merge branch 'nfsd-next' of git://linux-nfs.org/~bfields/linux Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.14-rc8-7-g632b06a/ Runtime: 29m 32s Passed: 123 Failed: 0 Warnings: 7 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/staging/imx-drm/imx-drm-core.c:87:25: warning: unused variable 'imxdrm' [-Wunused-variable] 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) Section mismatches:

10 years, 3 months

Tegra baseline test results for v3.14-rc8

by Paul Walmsley

Here are some basic Tegra test results for Linux v3.14-rc8. Logs and other details at: http://nvt.pwsan.com/pub/linux/testlogs/test_v3.14-rc8/20140324200103/ Test summary ------------ Build: zImage: Pass: ( 2/ 2): multi_v7_defconfig, tegra_defconfig Boot to userspace: multi_v7_defconfig: Pass: ( 2/ 2): tegra114-dalmore-a04, tegra30-beaver Boot to userspace: tegra_defconfig: Pass: ( 2/ 2): tegra114-dalmore-a04, tegra30-beaver vmlinux object size (delta in bytes from test_v3.14-rc7 (dcb99fd9b08cfe1afe426af4d8d3cbc429190f15)): text data bss total kernel +1080 -16 0 +1064 multi_v7_defconfig +1076 -16 0 +1060 tegra_defconfig Boot-time memory difference (delta in bytes from test_v3.14-rc7 (dcb99fd9b08cfe1afe426af4d8d3cbc429190f15)) avail rsrvd high freed board kconfig dtb . . . . tegra114-dalmore-a04 multi_v7_defconfig tegra114-dalmore . . . . tegra114-dalmore-a04 tegra_defconfig tegra114-dalmore . . . . tegra30-beaver multi_v7_defconfig tegra30-beaver . . . . tegra30-beaver tegra_defconfig tegra30-beaver

10 years, 3 months

mainline boot: 45 pass, 3 fail (v3.14-rc8)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc8 Failed boot tests (console logs at the end) =========================================== imx6dl-wandboard,wand-dual: FAIL: imx_v6_v7_defconfig tegra30-beaver: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: multi_v7_defconfig Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 15.4 sec legacy,da850evm PASS: 0 min 14.4 sec omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 53.3 sec am335x-boneblack PASS: 0 min 25.9 sec omap3-beagle-xm PASS: 1 min 0.7 sec legacy,3530beagle PASS: 0 min 34.4 sec omap4-panda PASS: 1 min 6.2 sec omap3-overo-tobi PASS: 0 min 23.4 sec am335x-bone PASS: 0 min 27.5 sec omap3-overo-storm-tobi PASS: 0 min 22.5 sec omap5-uevm PASS: 1 min 2.1 sec omap4-panda-es PASS: 1 min 10.0 sec legacy,3730storm PASS: 0 min 23.7 sec legacy,3530overo PASS: 0 min 21.6 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 43.9 sec sun7i-a20-cubieboard2 PASS: 0 min 14.4 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 20.6 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual FAIL: 0 min 31.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.7 sec imx6q-wandboard PASS: 0 min 17.1 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 1 min 9.5 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.8 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.9 sec sun4i-a10-cubieboard PASS: 0 min 12.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 50.5 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 18.1 sec tegra30-beaver FAIL: 0 min 31.4 sec am335x-boneblack PASS: 0 min 23.7 sec omap3-beagle-xm PASS: 0 min 48.5 sec sun7i-a20-cubieboard2 PASS: 0 min 14.4 sec armada-370-mirabox PASS: 0 min 22.1 sec omap4-panda PASS: 0 min 54.2 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.8 sec sun4i-a10-cubieboard PASS: 0 min 17.2 sec bcm28155-ap PASS: 1 min 4.2 sec omap3-overo-tobi PASS: 0 min 22.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.8 sec am335x-bone PASS: 0 min 26.2 sec omap3-overo-storm-tobi PASS: 0 min 21.2 sec omap5-uevm PASS: 1 min 49.6 sec imx6q-wandboard PASS: 0 min 17.4 sec omap4-panda-es PASS: 0 min 59.3 sec imx6dl-wandboard,wand-dual FAIL: 0 min 31.4 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 31.4 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.1 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 16.9 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.2 sec armada-370-mirabox PASS: 0 min 20.1 sec Console logs for failures ========================= imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Connected to wand-dual console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-dual console)> hardreset (user:khilman) Reboot wand-dual Reboot: wand-dual ; phidget 2 1 : ['off'] Reboot: wand-dual ; phidget 2 1 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ tegra30-beaver: FAIL: last 80 lines of boot log: ------------------------------------------------ Connected to beaver console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(beaver console)> hardreset (user:khilman) Reboot beaver Reboot: beaver ; ip9258 1 2 : off, sleep, on U-Boot SPL 2013.07-rc3-00036-gd84eb85 (Aug 07 2013 - 18:31:58) U-Boot 2013.07-rc3-00036-gd84eb85 (Aug 07 2013 - 18:31:58) TEGRA30 Board: NVIDIA Beaver I2C: ready DRAM: 2 GiB MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: se 0 Tegra30 (Beaver) # ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Connected to wand-dual console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-dual console)> hardreset (user:khilman) Reboot wand-dual Reboot: wand-dual ; phidget 2 1 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: FAIL

10 years, 3 months

next boot: 35 pass, 9 fail (next-20140325)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20140325 Failed boot tests (console logs at the end) =========================================== sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig imx6dl-wandboard,wand-dual: FAIL: imx_v6_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: imx_v6_v7_defconfig imx6q-wandboard: FAIL: imx_v6_v7_defconfig ste-snowball: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: multi_v7_defconfig imx6q-wandboard: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 53.5 sec am335x-boneblack PASS: 0 min 25.8 sec omap3-beagle-xm PASS: 1 min 0.9 sec legacy,3530beagle PASS: 0 min 36.1 sec omap4-panda PASS: 1 min 8.5 sec omap3-overo-tobi PASS: 0 min 23.7 sec am335x-bone PASS: 0 min 27.6 sec omap3-overo-storm-tobi PASS: 0 min 25.1 sec omap5-uevm PASS: 1 min 3.0 sec omap4-panda-es PASS: 1 min 3.3 sec legacy,3730storm PASS: 0 min 23.5 sec legacy,3530overo PASS: 0 min 21.7 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 40.8 sec sun7i-a20-cubieboard2 FAIL: 0 min 19.8 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.3 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual FAIL: 0 min 31.4 sec imx6dl-wandboard,wand-solo FAIL: 0 min 22.6 sec imx6q-wandboard FAIL: 0 min 21.2 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 23.0 sec sun4i-a10-cubieboard PASS: 0 min 17.4 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.8 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 52.7 sec multi_v7_defconfig ------------------ qcom-apq8074-dragonboard PASS: 1 min 9.6 sec ste-snowball FAIL: 0 min 33.5 sec tegra30-beaver PASS: 0 min 19.9 sec am335x-boneblack PASS: 0 min 23.9 sec omap3-beagle-xm PASS: 0 min 55.7 sec sun7i-a20-cubieboard2 FAIL: 0 min 19.8 sec armada-370-mirabox PASS: 0 min 22.2 sec omap4-panda PASS: 0 min 51.0 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.2 sec sun4i-a10-cubieboard PASS: 0 min 14.6 sec bcm28155-ap PASS: 1 min 15.0 sec omap3-overo-tobi PASS: 0 min 22.0 sec imx6dl-wandboard,wand-solo FAIL: 0 min 22.4 sec am335x-bone PASS: 0 min 31.6 sec omap3-overo-storm-tobi PASS: 0 min 24.0 sec omap5-uevm PASS: 1 min 43.8 sec imx6q-wandboard FAIL: 0 min 31.5 sec omap4-panda-es PASS: 0 min 54.8 sec imx6dl-wandboard,wand-dual FAIL: 0 min 31.4 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.5 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 17.5 sec Console logs for failures ========================= multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-3SPYNb/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-3SPYNb/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-3SPYNb/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 2.7 MiB/s done Bytes transferred = 4595424 (461ee0 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-3SPYNb/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-3SPYNb/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-3SPYNb/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.5 MiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x461ee0 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.81 seconds. # PYBOOT: Result: FAIL imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Connected to wand-dual console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-dual console)> hardreset (user:khilman) Reboot wand-dual Reboot: wand-dual ; phidget 2 1 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log: ------------------------------------------------------------ version U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.164 =>setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 =>if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x10800000 192.168.1.2:tmp/wand-solo-bAcavE/zImage tftp 0x10800000 192.168.1.2:tmp/wand-solo-bAcavE/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-bAcavE/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.5 MiB/s done Bytes transferred = 5223440 (4fb410 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x11000000 192.168.1.2:tmp/wand-solo-bAcavE/imx6dl-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-solo-bAcavE/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-bAcavE/imx6dl-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1.4 MiB/s done Bytes transferred = 26637 (680d hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.164:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100980c Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 22.60 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: FAIL: last 80 lines of boot log: ------------------------------------------------- U-Boot 2013.07-00001-gc362749 (Sep 06 2013 - 07:50:29) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 => setenv bootargs console=ttymxc0,115200 setenv bootargs console=ttymxc0,115200 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.163 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 => if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x10800000 192.168.1.2:tmp/wand-quad-ot6Kuw/zImage tftp 0x10800000 192.168.1.2:tmp/wand-quad-ot6Kuw/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'tmp/wand-quad-ot6Kuw/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 2.7 MiB/s done Bytes transferred = 5223440 (4fb410 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x11000000 192.168.1.2:tmp/wand-quad-ot6Kuw/imx6q-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-quad-ot6Kuw/imx6q-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'tmp/wand-quad-ot6Kuw/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *### 2.6 MiB/s done Bytes transferred = 29426 (72f2 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x4fb410 ] ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a2f1 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 21.16 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- CPU: ST-Ericsson db8500 v2 (Dual ARM Cortex A9) 998.400 Mhz I2C: ready DRAM: 1 GB MMC: MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $ version version U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9e setenv ethaddr 6e:e6:84:36:8e:9e Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U8500 $ if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U8500 $ if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U8500 $ setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U8500 $ dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-Ow5Avd/tmp70n7TB-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-Ow5Avd/tmp70n7TB-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-Ow5Avd/tmp70n7TB-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 4611385 (465d39 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4611321 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 33.52 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-rc1ORR/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-rc1ORR/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-rc1ORR/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 2.7 MiB/s done Bytes transferred = 4570072 (45bbd8 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.8 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-rc1ORR/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-rc1ORR/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-rc1ORR/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.5 MiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45bbd8 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.84 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log: ------------------------------------------------------------ => version version U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.164 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 => if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x10800000 192.168.1.2:tmp/wand-solo-OWL_0Q/zImage tftp 0x10800000 192.168.1.2:tmp/wand-solo-OWL_0Q/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-OWL_0Q/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 1.5 MiB/s done Bytes transferred = 4570072 (45bbd8 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) =>tftp 0x11000000 192.168.1.2:tmp/wand-solo-OWL_0Q/imx6dl-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-solo-OWL_0Q/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-OWL_0Q/imx6dl-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1.4 MiB/s done Bytes transferred = 26637 (680d hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.164:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100980c Starting kernel ... Tz7r~y8þ¢ŒX²s4fMs/<_X~X€Q%ÓÑµR0töô@dxBVàkL6cvh/_.gzB²ÐÖg?wV¿Ìë{¯ß/@7`kVÖ¿ÈëÈh/_oBPák\Vâöèoßoc@Pik'V?pVØëöÔ+ß n|4q:5<±²3rDbf^ôþö²øø²d?zð0ÒôýŸŽÔ©(j>XVÀg¿ÖðÖßPx^wt]vdbyVvÐ2²hz3ëþüŒ<ñöÔM>Ó@PVgV¿ùoZW}~'\{P\?PWAfzWgVë{Vc3vz`àVÄg÷vg[wtT7]V¿ÙÐÖóûæú×gVëû7ðñw}5^Vg?@ZÃÄ÷}W}X'Ý»Ü¿Öùw~V3GOHwsøÖwfa`Q@gkt\W}~§ÜÔ¿Ð×InzWG#wrppw4^QÔg_}W}~Ö·ØûÖ¿Ð?PWAfzWgTë{7Vc}w<r.<9}14~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 22.44 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: FAIL: last 80 lines of boot log: ------------------------------------------------- Connected to wand-quad console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-quad console)> hardreset (user:khilman) Reboot wand-quad Reboot: wand-quad ; phidget 2 3 : off, sleep, on U-Boot 2013.07-00001-gc362749 (Sep 06 2013 - 07:50:29) CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR Board: Wandboard DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - bad CRC, using default environment In: serial 0 => ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.48 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Connected to wand-dual console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-dual console)> hardreset (user:khilman) Reboot wand-dual Reboot: wand-dual ; phidget 2 1 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: FAIL

10 years, 3 months

next boot: 26 passed 7 failed (next/next-20140325)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:20.74 cubie2 multi_lpae_defconfig : FAILED 0:58.69 cubox dove_defconfig : BUILD FAILED hummingboard imx_v6_v7_defconfig : FAILED 1:06.67 hummingboard multi_v7_defconfig : FAILED 1:01.42 snowball multi_v7_defconfig : FAILED 1:09.55 wandboard imx_v6_v7_defconfig : FAILED 1:02.11 wandboard multi_v7_defconfig : FAILED 1:04.84 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:16.93 arndale exynos_defconfig : passed 1:06.97 bbb omap2plus_defconfig : passed 1:37.56 bbb multi_v7_defconfig : passed 1:18.94 beaver tegra_defconfig : passed 0:56.16 beaver multi_v7_defconfig : passed 0:48.10 capri bcm_defconfig : passed 0:42.32 capri multi_v7_defconfig : passed 0:44.05 cubie sunxi_defconfig : passed 1:07.33 cubie multi_v7_defconfig : passed 0:57.47 cubie2 multi_v7_defconfig : passed 1:01.97 dalmore tegra_defconfig : passed 1:24.13 dalmore multi_v7_defconfig : passed 1:19.57 dalmore multi_lpae_defconfig : passed 1:16.61 omap5uevm omap2plus_defconfig : warnings 1:04.26 omap5uevm multi_v7_defconfig : warnings 1:42.65 omap5uevm multi_lpae_defconfig : warnings 1:40.56 panda omap2plus_defconfig : warnings 1:16.43 panda multi_v7_defconfig : passed 3:01.27 sama5 sama5_defconfig : passed 1:54.32 seaboard tegra_defconfig : passed 0:59.75 seaboard multi_v7_defconfig : passed 1:04.72 snow exynos_defconfig : passed 1:32.27 snowball u8500_defconfig : passed 2:01.51 trimslice tegra_defconfig : passed 1:03.39 trimslice multi_v7_defconfig : passed 1:01.03 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- sun7i# tftp 0x40008000 next/next-20140325/multi_lpae_defconfig/zImage tftp 0x40008000 next/next-20140325/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.158 Filename 'next/next-20140325/multi_lpae_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 3.9 MiB/s done Bytes transferred = 4595424 (461ee0 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140325/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140325/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.158 Filename 'next/next-20140325/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 710.9 KiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x461ee0 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.077051] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.077071] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.077084] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.078027] Switched to clocksource timer [ 0.081761] Clockevents: could not switch to one-shot mode: dummy_timer is not functional. [ 0.081777] Could not switch to high resolution mode on CPU 0 [ 0.085080] NET: Registered protocol family 2 [ 0.085559] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.085646] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.085769] TCP: Hash tables configured (established 8192 bind 8192) [ 0.085852] TCP: reno registered [ 0.085866] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.085922] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.086130] NET: Registered protocol family 1 [ 0.086524] RPC: Registered named UNIX socket transport module. [ 0.086540] RPC: Registered udp transport module. [ 0.086546] RPC: Registered tcp transport module. [ 0.086552] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.087516] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.088003] bounce pool size: 64 pages [ 0.095831] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.095849] io scheduler noop registered [ 0.095855] io scheduler deadline registered [ 0.096032] io scheduler cfq registered (default) [ 0.097644] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.139117] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.141520] console [ttyS0] disabled [ 0.161673] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.658364] console [ttyS0] enabled [ 0.663050] mousedev: PS/2 mouse device common for all mice [ 0.668897] i2c /dev entries driver [ 0.673759] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.682714] TCP: cubic registered [ 0.686033] NET: Registered protocol family 17 [ 0.690558] Registering SWP/SWPB emulation handler [ 0.696305] ahci-5v: 5000 mV [ 0.699513] usb1-vbus: 5000 mV [ 0.702947] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-imx_v6_v7_defconfig failure log: ------------------------------------------------- tftp 0x10800000 next/next-20140325/imx_v6_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.162 Filename 'next/next-20140325/imx_v6_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.9 MiB/s done Bytes transferred = 5223440 (4fb410 hex) C1 U-Boot > setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot >tftp 0x11000000 next/next-20140325/imx_v6_v7_defconfig/dtbs/imx6dl-hummingboard.dtb tftp 0x11000000 next/next-20140325/imx_v6_v7_defconfig/dtbs/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.162 Filename 'next/next-20140325/imx_v6_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'. Load address: 0x11000000 Loading: *## 1.7 MiB/s done Bytes transferred = 25988 (6584 hex) C1 U-Boot > printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk C1 U-Boot > bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x4fb410 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009583 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- C1 U-Boot >tftp 0x10800000 next/next-20140325/multi_v7_defconfig/zImage tftp 0x10800000 next/next-20140325/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.162 Filename 'next/next-20140325/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 1.9 MiB/s done Bytes transferred = 4570072 (45bbd8 hex) C1 U-Boot > setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot >tftp 0x11000000 next/next-20140325/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb tftp 0x11000000 next/next-20140325/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.162 Filename 'next/next-20140325/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'. Load address: 0x11000000 Loading: *## 746.1 KiB/s done Bytes transferred = 25988 (6584 hex) C1 U-Boot > printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk C1 U-Boot >bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x45bbd8 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009583 Starting kernel ... Ð©·Ûr¶dMÓêÀ@@C@€ôR»ØÀc qÈR`ÀXÀ%€ ÚcÀ¡ÀD@`ÛØ%XÀóúÓXÔtÒ%[@hI €ß`äH,[ÞÚ`ÐÈØr·š³þ$à$¿À%ÐØØ!æPôf8ÒÈ0xeÐÒÀÚR@RP@mÂP!À%ÒÄ1Ò€$ò0Òp$€÷àÚÒÀÚ-ÃÂÂ°âÒ!ÈøÐÊÂÐPpððÒð¿ÚÐÒÚÒÀÛÐÀj¢!òmÒŒüÈ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.128 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-ouUGwb/tmpiuPmON-uImage tftp 0x00100000 tmp/snowball-ouUGwb/tmpiuPmON-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.128 Filename 'tmp/snowball-ouUGwb/tmpiuPmON-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 4611385 (465d39 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4611321 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-imx_v6_v7_defconfig failure log: ------------------------------------------------- tftp 0x10800000 next/next-20140325/imx_v6_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.159 Filename 'next/next-20140325/imx_v6_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 5.7 MiB/s done Bytes transferred = 5223440 (4fb410 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x11000000 next/next-20140325/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 next/next-20140325/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.159 Filename 'next/next-20140325/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *### 4.7 MiB/s done Bytes transferred = 29426 (72f2 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x4fb410 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a2f1 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x10800000 next/next-20140325/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.159 Filename 'next/next-20140325/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 6 MiB/s done Bytes transferred = 4570072 (45bbd8 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x11000000 next/next-20140325/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 next/next-20140325/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.159 Filename 'next/next-20140325/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *### 1 MiB/s done Bytes transferred = 29426 (72f2 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x45bbd8 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a2f1 Starting kernel ... node: wandboard status: on ~$off # PYBOOT: Exception: timeout

10 years, 3 months

← Newer
1
...
5
6
7
8
9
10
11
...
34
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports March 2014