Kernel-build-reports March 2014

kernel-build-reports@lists.linaro.org

15 participants
336 discussions

arm-soc build: 7 warnings 0 failures (arm-soc/v3.14-rc5-1281-g6673de9)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: 6673de9 Merge branch 'next/soc' into for-next Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.14-rc5-1281-g6673de9/ Runtime: 37m 31s Passed: 124 Failed: 0 Warnings: 7 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/staging/imx-drm/imx-drm-core.c:87:25: warning: unused variable 'imxdrm' [-Wunused-variable] 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b60): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 8 months

arm-soc boot: 46 pass, 1 fail (v3.14-rc5-1279-g88461ae)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.14-rc5-1279-g88461ae Failed boot tests (console logs at the end) =========================================== ste-snowball: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm 0 min 51.8 sec: PASS am335x-boneblack 0 min 25.8 sec: PASS omap3-beagle-xm 0 min 57.0 sec: PASS legacy,3530beagle 0 min 41.2 sec: PASS (Warnings: 1) omap4-panda 1 min 7.4 sec: PASS omap3-overo-tobi 0 min 23.4 sec: PASS (Warnings: 1) am335x-bone 0 min 27.4 sec: PASS omap3-overo-storm-tobi 0 min 25.2 sec: PASS omap5-uevm 1 min 0.6 sec: PASS (Warnings: 1) omap4-panda-es 1 min 13.0 sec: PASS legacy,3730storm 0 min 24.3 sec: PASS legacy,3530overo 0 min 21.5 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 45.2 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 12.3 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.1 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.9 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.9 sec: PASS imx6q-wandboard 0 min 16.8 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 22.6 sec: PASS sun4i-a10-cubieboard 0 min 17.6 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 23.4 sec: PASS mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 22.4 sec: PASS armada-370-mirabox 0 min 20.5 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 28.6 sec: PASS multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 15.4 sec: PASS ste-snowball 0 min 53.5 sec: FAIL tegra30-beaver 0 min 20.0 sec: PASS am335x-boneblack 0 min 23.7 sec: PASS omap3-beagle-xm 0 min 49.3 sec: PASS sun7i-a20-cubieboard2 0 min 12.3 sec: PASS armada-370-mirabox 0 min 22.5 sec: PASS omap4-panda 0 min 54.8 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.3 sec: PASS sun4i-a10-cubieboard 0 min 19.3 sec: PASS bcm28155-ap 0 min 27.3 sec: PASS omap3-overo-tobi 0 min 21.9 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.1 sec: PASS am335x-bone 0 min 26.6 sec: PASS omap3-overo-storm-tobi 0 min 24.7 sec: PASS omap5-uevm 1 min 48.1 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.3 sec: PASS omap4-panda-es 0 min 56.6 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.3 sec: PASS u8500_defconfig --------------- ste-snowball 0 min 30.6 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.1 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.1 sec: PASS da850-evm 0 min 15.2 sec: PASS Console logs for failures ========================= multi_v7_defconfig ------------------ ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- CPU: ST-Ericsson db8500 v2 (Dual ARM Cortex A9) 998.400 Mhz I2C: ready DRAM: 1 GB MMC: MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $ version version U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9e setenv ethaddr 6e:e6:84:36:8e:9e Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U8500 $ if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U8500 $ if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U8500 $ setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U8500 $ dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $tftp 0x00800000 192.168.1.2:tmp/snowball-sEMKCy/tmppOb5sE-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-sEMKCy/tmppOb5sE-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-sEMKCy/tmppOb5sE-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 4619817 (467e29 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4619753 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 53.47 seconds. # PYBOOT: Result: FAIL

10 years, 8 months

arm-soc boot: 30 passed 3 failed (arm-soc/v3.14-rc5-1279-g88461ae)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:21.83 cubie2 multi_lpae_defconfig : FAILED 1:01.44 snowball multi_v7_defconfig : FAILED 1:12.94 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:19.21 arndale exynos_defconfig : passed 1:08.57 bbb omap2plus_defconfig : warnings 1:37.80 bbb multi_v7_defconfig : passed 1:21.25 beaver tegra_defconfig : passed 0:56.30 beaver multi_v7_defconfig : passed 0:52.33 capri bcm_defconfig : passed 0:42.88 capri multi_v7_defconfig : passed 0:44.99 cubie sunxi_defconfig : passed 1:08.98 cubie multi_v7_defconfig : passed 1:07.20 cubie2 multi_v7_defconfig : passed 1:18.06 dalmore tegra_defconfig : passed 1:27.18 dalmore multi_v7_defconfig : passed 1:16.69 dalmore multi_lpae_defconfig : passed 1:16.45 hummingboard imx_v6_v7_defconfig : passed 1:25.35 hummingboard multi_v7_defconfig : passed 1:06.08 omap5uevm omap2plus_defconfig : warnings 1:17.53 omap5uevm multi_v7_defconfig : warnings 1:36.01 omap5uevm multi_lpae_defconfig : warnings 1:36.81 panda omap2plus_defconfig : passed 1:19.17 panda multi_v7_defconfig : passed 2:45.73 sama5 sama5_defconfig : passed 1:54.51 seaboard tegra_defconfig : passed 1:01.63 seaboard multi_v7_defconfig : passed 1:13.72 snow exynos_defconfig : passed 1:28.68 snowball u8500_defconfig : passed 1:30.38 trimslice tegra_defconfig : passed 1:01.47 trimslice multi_v7_defconfig : passed 1:05.38 wandboard imx_v6_v7_defconfig : passed 0:56.70 wandboard multi_v7_defconfig : passed 0:59.98 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- tftp 0x40008000 arm-soc/v3.14-rc5-1279-g88461ae/multi_node: cubie2 status: on lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.161 Filename 'arm-soc/v3.14-rc5-1279-g88461ae/multi_lpae_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 3.9 MiB/s done Bytes transferred = 4604368 (4641d0 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 arm-soc/v3.14-rc5-1279-g88461ae/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1279-g88461ae/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.161 Filename 'arm-soc/v3.14-rc5-1279-g88461ae/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 591.8 KiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x4641d0 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.073147] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.073171] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.073183] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.073203] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.073215] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.074054] Switched to clocksource timer [ 0.080469] NET: Registered protocol family 2 [ 0.080971] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.081059] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.081180] TCP: Hash tables configured (established 8192 bind 8192) [ 0.081263] TCP: reno registered [ 0.081279] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.081335] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.081585] NET: Registered protocol family 1 [ 0.082004] Clockevents: could not switch to one-shot mode: dummy_timer is not functional. [ 0.082024] Could not switch to high resolution mode on CPU 0 [ 0.082108] RPC: Registered named UNIX socket transport module. [ 0.082116] RPC: Registered udp transport module. [ 0.082122] RPC: Registered tcp transport module. [ 0.082128] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.083030] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.083569] bounce pool size: 64 pages [ 0.091119] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.091135] io scheduler noop registered [ 0.091141] io scheduler deadline registered [ 0.091322] io scheduler cfq registered (default) [ 0.093280] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.133888] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.156472] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.653681] console [ttyS0] enabled [ 0.658309] mousedev: PS/2 mouse device common for all mice [ 0.664177] i2c /dev entries driver [ 0.669691] TCP: cubic registered [ 0.673065] NET: Registered protocol family 17 [ 0.677590] Registering SWP/SWPB emulation handler [ 0.683309] ahci-5v: 5000 mV [ 0.686531] usb1-vbus: 5000 mV [ 0.689883] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- node: snowball status: on *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.129 U8500 $setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-LWVtHG/tmpi3Wau7-uImage tftp 0x00100000 tmp/snowball-LWVtHG/tmpi3Wau7-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'tmp/snowball-LWVtHG/tmpi3Wau7-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 4619817 (467e29 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4619753 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 8 months

arm-soc build: 7 warnings 0 failures (arm-soc/v3.14-rc5-1279-g88461ae)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: 88461ae Allwinner sunXi SoCs clock changes Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.14-rc5-1279-g88461ae/ Runtime: 37m 17s Passed: 124 Failed: 0 Warnings: 7 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/staging/imx-drm/imx-drm-core.c:87:25: warning: unused variable 'imxdrm' [-Wunused-variable] 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b60): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 8 months

arm-soc boot: 46 pass, 1 fail (v3.14-rc5-1279-g872ac2b)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.14-rc5-1279-g872ac2b Failed boot tests (console logs at the end) =========================================== ste-snowball: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm 0 min 51.0 sec: PASS am335x-boneblack 0 min 25.8 sec: PASS omap3-beagle-xm 1 min 0.8 sec: PASS legacy,3530beagle 0 min 51.2 sec: PASS (Warnings: 1) omap4-panda 1 min 16.8 sec: PASS omap3-overo-tobi 0 min 23.1 sec: PASS (Warnings: 1) am335x-bone 0 min 27.4 sec: PASS omap3-overo-storm-tobi 0 min 25.2 sec: PASS omap5-uevm 1 min 8.1 sec: PASS (Warnings: 1) omap4-panda-es 1 min 14.5 sec: PASS legacy,3730storm 0 min 21.3 sec: PASS legacy,3530overo 0 min 21.3 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 48.7 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 12.4 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.6 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.8 sec: PASS imx6dl-wandboard,wand-solo 0 min 19.1 sec: PASS imx6q-wandboard 0 min 18.0 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 22.8 sec: PASS sun4i-a10-cubieboard 0 min 13.0 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 24.1 sec: PASS mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 22.2 sec: PASS armada-370-mirabox 0 min 20.4 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 29.9 sec: PASS multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 16.6 sec: PASS ste-snowball 0 min 53.6 sec: FAIL tegra30-beaver 0 min 22.9 sec: PASS am335x-boneblack 0 min 23.9 sec: PASS omap3-beagle-xm 0 min 48.8 sec: PASS sun7i-a20-cubieboard2 0 min 12.7 sec: PASS armada-370-mirabox 0 min 23.9 sec: PASS omap4-panda 0 min 50.9 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.1 sec: PASS sun4i-a10-cubieboard 0 min 19.3 sec: PASS bcm28155-ap 0 min 27.5 sec: PASS omap3-overo-tobi 0 min 21.9 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.1 sec: PASS am335x-bone 0 min 26.6 sec: PASS omap3-overo-storm-tobi 0 min 26.4 sec: PASS omap5-uevm 1 min 46.3 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.1 sec: PASS omap4-panda-es 0 min 59.4 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.4 sec: PASS u8500_defconfig --------------- ste-snowball 0 min 31.0 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.2 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.3 sec: PASS da850-evm 0 min 14.9 sec: PASS Console logs for failures ========================= multi_v7_defconfig ------------------ ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- CPU: ST-Ericsson db8500 v2 (Dual ARM Cortex A9) 998.400 Mhz I2C: ready DRAM: 1 GB MMC: MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $version version U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $setenv ethaddr 6e:e6:84:36:8e:9e setenv ethaddr 6e:e6:84:36:8e:9e Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U8500 $ if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U8500 $if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U8500 $ setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U8500 $dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-rI5jBd/tmpS0Krnj-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-rI5jBd/tmpS0Krnj-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-rI5jBd/tmpS0Krnj-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 4619817 (467e29 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4619753 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 53.65 seconds. # PYBOOT: Result: FAIL

10 years, 8 months

arm-soc boot: 29 passed 4 failed (arm-soc/v3.14-rc5-1279-g872ac2b)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:19.11 cubie2 multi_lpae_defconfig : FAILED 0:59.62 snowball multi_v7_defconfig : FAILED 1:12.04 wandboard imx_v6_v7_defconfig : FAILED 1:15.01 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:13.45 arndale exynos_defconfig : passed 1:01.58 bbb omap2plus_defconfig : passed 1:31.87 bbb multi_v7_defconfig : passed 1:13.08 beaver tegra_defconfig : passed 0:50.14 beaver multi_v7_defconfig : passed 0:53.38 capri bcm_defconfig : passed 0:44.35 capri multi_v7_defconfig : passed 0:45.23 cubie sunxi_defconfig : passed 1:02.69 cubie multi_v7_defconfig : passed 1:16.74 cubie2 multi_v7_defconfig : passed 1:19.61 dalmore tegra_defconfig : passed 1:16.87 dalmore multi_v7_defconfig : passed 1:17.27 dalmore multi_lpae_defconfig : passed 1:18.60 hummingboard imx_v6_v7_defconfig : passed 1:16.91 hummingboard multi_v7_defconfig : passed 1:09.44 omap5uevm omap2plus_defconfig : warnings 0:58.40 omap5uevm multi_v7_defconfig : warnings 1:35.94 omap5uevm multi_lpae_defconfig : warnings 1:36.27 panda omap2plus_defconfig : passed 1:13.91 panda multi_v7_defconfig : passed 1:21.69 sama5 sama5_defconfig : passed 1:53.00 seaboard tegra_defconfig : passed 1:03.45 seaboard multi_v7_defconfig : passed 1:08.50 snow exynos_defconfig : passed 1:30.57 snowball u8500_defconfig : passed 1:21.25 trimslice tegra_defconfig : passed 0:59.95 trimslice multi_v7_defconfig : passed 0:58.62 wandboard multi_v7_defconfig : passed 1:02.55 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- sun7i# tftp 0x40008000 arm-soc/v3.14-rc5-1279-g872ac2b/multi_lpae_defconfig/zImage tftp 0x40008000 arm-soc/v3.14-rc5-1279-g872ac2b/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.160 Filename 'arm-soc/v3.14-rc5-1279-g872ac2b/multi_lpae_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 3.7 MiB/s done Bytes transferred = 4604368 (4641d0 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 arm-soc/v3.14-rc5-1279-g872ac2b/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1279-g872ac2b/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.160 Filename 'arm-soc/v3.14-rc5-1279-g872ac2b/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 385.7 KiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x4641d0 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.073153] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.073175] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.073187] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.073206] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.073221] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.074056] Switched to clocksource timer [ 0.080482] NET: Registered protocol family 2 [ 0.080977] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.081063] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.081185] TCP: Hash tables configured (established 8192 bind 8192) [ 0.081264] TCP: reno registered [ 0.081280] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.081336] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.081589] NET: Registered protocol family 1 [ 0.081987] Clockevents: could not switch to one-shot mode: dummy_timer is not functional. [ 0.082009] Could not switch to high resolution mode on CPU 0 [ 0.082107] RPC: Registered named UNIX socket transport module. [ 0.082115] RPC: Registered udp transport module. [ 0.082121] RPC: Registered tcp transport module. [ 0.082127] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.083019] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.083567] bounce pool size: 64 pages [ 0.091107] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.091124] io scheduler noop registered [ 0.091131] io scheduler deadline registered [ 0.091308] io scheduler cfq registered (default) [ 0.093270] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.133837] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.156451] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.653665] console [ttyS0] enabled [ 0.658302] mousedev: PS/2 mouse device common for all mice [ 0.664169] i2c /dev entries driver [ 0.669685] TCP: cubic registered [ 0.673053] NET: Registered protocol family 17 [ 0.677575] Registering SWP/SWPB emulation handler [ 0.683289] ahci-5v: 5000 mV [ 0.686514] usb1-vbus: 5000 mV [ 0.689867] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 2 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.128 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-g_YVRW/tmp3hCVlg-uImage tftp 0x00100000 tmp/snowball-g_YVRW/tmp3hCVlg-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.128 Filename 'tmp/snowball-g_YVRW/tmp3hCVlg-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 4619817 (467e29 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4619753 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-imx_v6_v7_defconfig failure log: ------------------------------------------------- r7:800e59a8 r6:ee295800 r5:ee2956e0 r4:ed5ec800 [<800dfa5c>] (do_dentry_open.isra.19) from [<800dfdbc>] (finish_open+0x28/0x40) r9:00000000 r8:ecd99e88 r7:00000000 r6:00020901 r5:ecd99f5c r4:ecd99e84 [<800dfd94>] (finish_open) from [<800eeb60>] (do_last.isra.61+0x448/0xc44) r4:ecd99ed0 r3:ecd99e84 [<800ee718>] (do_last.isra.61) from [<800ef418>] (path_openat+0xbc/0x628) r10:ecd98000 r9:00000000 r8:00000000 r7:ecd99e88 r6:ecd99f5c r5:ecd99ed0 r4:ed5ec800 [<800ef35c>] (path_openat) from [<800f0800>] (do_filp_open+0x34/0x88) r10:00000000 r9:ecd98000 r8:8000eac4 r7:ffffff9c r6:ed9ee000 r5:00000001 r4:ecd99f5c [<800f07cc>] (do_filp_open) from [<800e0e1c>] (do_sys_open+0x104/0x1d4) r7:0000000a r6:ffffff9c r5:ed9ee000 r4:00020901 [<800e0d18>] (do_sys_open) from [<800e0f10>] (SyS_open+0x24/0x28) r9:ecd98000 r8:8000eac4 r7:00000005 r6:00039dcc r5:0004e0a8 r4:76d5134c [<800e0eec>] (SyS_open) from [<8000e900>] (ret_fast_syscall+0x0/0x48) CPU3: stopping CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D 3.14.0-rc5+ #1 Backtrace: [<8001217c>] (dump_backtrace) from [<80012460>] (show_stack+0x18/0x1c) r6:808c8fe8 r5:00000000 r4:808f0f9c r3:00000000 [<80012448>] (show_stack) from [<8064dd04>] (dump_stack+0x84/0x9c) [<8064dc80>] (dump_stack) from [<80015464>] (handle_IPI+0x14c/0x178) r5:808d4d2c r4:00000003 [<80015318>] (handle_IPI) from [<80008678>] (gic_handle_irq+0x5c/0x64) r8:00000000 r7:f4000100 r6:ee0a1f68 r5:808d4e88 r4:f400010c r3:ee07e880 [<8000861c>] (gic_handle_irq) from [<80013064>] (__irq_svc+0x44/0x5c) Exception stack(0xee0a1f68 to 0xee0a1fb0) 1f60: 8000f630 ee0a1f78 00000000 00000000 ee0a0000 808d499c 1f80: 808d4938 8092d47d 00000000 ee0a0000 806584cc ee0a1fbc ee0a1fa0 ee0a1fb0 1fa0: 80065bdc 8000f634 60000013 ffffffff r7:ee0a1f9c r6:ffffffff r5:60000013 r4:8000f634 [<8000f60c>] (arch_cpu_idle) from [<8006fb34>] (cpu_startup_entry+0x108/0x160) [<8006fa2c>] (cpu_startup_entry) from [<800150ac>] (secondary_start_kernel+0x144/0x164) r7:8092d990 [<80014f68>] (secondary_start_kernel) from [<10008704>] (0x10008704) r5:0000001f r4:7e08406a drm_kms_helper: panic occurred, switching back to text console ~$off # PYBOOT: Exception: ERROR: Timeout waiting for command: dmesg -l err | awk '{ print "[ERR] " $0 }'.

10 years, 8 months

next boot: 26 passed 7 failed (next/next-20140327)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:18.62 cubie2 multi_lpae_defconfig : FAILED 1:05.03 cubox dove_defconfig : BUILD FAILED hummingboard imx_v6_v7_defconfig : FAILED 1:06.06 hummingboard multi_v7_defconfig : FAILED 1:01.66 snowball multi_v7_defconfig : FAILED 1:11.26 wandboard imx_v6_v7_defconfig : FAILED 1:02.79 wandboard multi_v7_defconfig : FAILED 1:09.93 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:13.11 arndale exynos_defconfig : passed 1:03.70 bbb omap2plus_defconfig : passed 1:31.77 bbb multi_v7_defconfig : passed 1:18.60 beaver tegra_defconfig : passed 0:48.66 beaver multi_v7_defconfig : passed 0:57.62 capri bcm_defconfig : passed 0:42.49 capri multi_v7_defconfig : passed 0:44.68 cubie sunxi_defconfig : passed 0:53.45 cubie multi_v7_defconfig : passed 1:08.30 cubie2 multi_v7_defconfig : passed 1:10.98 dalmore tegra_defconfig : passed 1:21.45 dalmore multi_v7_defconfig : passed 1:18.34 dalmore multi_lpae_defconfig : passed 1:17.94 omap5uevm omap2plus_defconfig : warnings 1:07.75 omap5uevm multi_v7_defconfig : warnings 1:42.46 omap5uevm multi_lpae_defconfig : warnings 1:42.91 panda omap2plus_defconfig : warnings 1:17.70 panda multi_v7_defconfig : passed 1:30.22 sama5 sama5_defconfig : passed 1:53.76 seaboard tegra_defconfig : passed 1:01.66 seaboard multi_v7_defconfig : passed 1:05.55 snow exynos_defconfig : passed 1:28.28 snowball u8500_defconfig : passed 1:26.98 trimslice tegra_defconfig : passed 0:57.83 trimslice multi_v7_defconfig : passed 1:09.21 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- tftp 0x40008000 next/next-20140327/multi_lpae_denode: cubie2 status: on fconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.160 Filename 'next/next-20140327/multi_lpae_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 3.9 MiB/s done Bytes transferred = 4595056 (461d70 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140327/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140327/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.160 Filename 'next/next-20140327/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 658.2 KiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x461d70 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.077038] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.077057] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.077069] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.078010] Switched to clocksource timer [ 0.081749] Clockevents: could not switch to one-shot mode: dummy_timer is not functional. [ 0.081767] Could not switch to high resolution mode on CPU 0 [ 0.085108] NET: Registered protocol family 2 [ 0.085586] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.085672] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.085793] TCP: Hash tables configured (established 8192 bind 8192) [ 0.085876] TCP: reno registered [ 0.085891] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.085948] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.086157] NET: Registered protocol family 1 [ 0.086551] RPC: Registered named UNIX socket transport module. [ 0.086565] RPC: Registered udp transport module. [ 0.086571] RPC: Registered tcp transport module. [ 0.086577] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.087541] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.088016] bounce pool size: 64 pages [ 0.095860] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.095881] io scheduler noop registered [ 0.095887] io scheduler deadline registered [ 0.096059] io scheduler cfq registered (default) [ 0.097680] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.139238] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.141658] console [ttyS0] disabled [ 0.161805] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.658491] console [ttyS0] enabled [ 0.663163] mousedev: PS/2 mouse device common for all mice [ 0.669021] i2c /dev entries driver [ 0.673896] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.682846] TCP: cubic registered [ 0.686167] NET: Registered protocol family 17 [ 0.690691] Registering SWP/SWPB emulation handler [ 0.696423] ahci-5v: 5000 mV [ 0.699644] usb1-vbus: 5000 mV [ 0.703084] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-imx_v6_v7_defconfig failure log: ------------------------------------------------- tftp 0x10800000 next/next-20140327/imx_v6_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.162 Filename 'next/next-20140327/imx_v6_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.9 MiB/s done Bytes transferred = 5223928 (4fb5f8 hex) C1 U-Boot > setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot > tftp 0x11000000 next/next-20140327/imx_v6_v7_defconfig/dtbs/imx6dl-hummingboard.dtb tftp 0x11000000 next/next-20140327/imx_v6_v7_defconfig/dtbs/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.162 Filename 'next/next-20140327/imx_v6_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'. Load address: 0x11000000 Loading: *## 1.8 MiB/s done Bytes transferred = 25988 (6584 hex) C1 U-Boot > printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk C1 U-Boot > bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x4fb5f8 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009583 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.162 Filename 'next/next-20140327/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 2 MiB/s done Bytes transferred = 4569440 (45b960 hex) C1 U-Boot >setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot > tftp 0x11000000 next/next-20140327/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb tftp 0x11000000 next/next-20140327/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.162 Filename 'next/next-20140327/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'. Load address: 0x11000000 Loading: *## 793 KiB/s done Bytes transferred = 25988 (6584 hex) C1 U-Boot > printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk C1 U-Boot > bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x45b960 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009583 Starting kernel ... ÌÐÙÉM3(¬D0* øD²bcž,-« -'ÄrÊðL@:ÀÈÀ!2ÚSÐÊÊÀ|\ËÒJÚ£xm]Ó%|üðèiÀÚ%Ä0ÐÚÐÞÒ¥³²ÚØÙÄÚRX(ÐÈZð°r°:`°úùß)b²jÀØ:À³ÚhPÒÀÀXØÐØmÐòÒ°žÖ\ÀcØÒÚ,Ô-ÀÐÀØïÚ%#ºÐÒ €CÒ²ÐÓÐ€Ä²àžÒÌ0×ÐÀÚÐÀÄÐ8@ÒÀÒ ÀÐ²ÒØÀðÂððð³Ð5ÃÒøØøo»~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 2 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.128 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-b_tZ8S/tmptEkq9Z-uImage tftp 0x00100000 tmp/snowball-b_tZ8S/tmptEkq9Z-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.128 Filename 'tmp/snowball-b_tZ8S/tmptEkq9Z-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 4610753 (465ac1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4610689 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-imx_v6_v7_defconfig failure log: ------------------------------------------------- tftp 0x10800000 next/next-20140327/imx_v6_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.161 Filename 'next/next-20140327/imx_v6_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 5.7 MiB/s done Bytes transferred = 5223928 (4fb5f8 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x11000000 next/next-20140327/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 next/next-20140327/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.161 Filename 'next/next-20140327/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *### 585.9 KiB/s done Bytes transferred = 29426 (72f2 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x4fb5f8 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a2f1 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x10800000 next/next-20140327/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.161 Filename 'next/next-20140327/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 6 MiB/s done Bytes transferred = 4569440 (45b960 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x11000000 next/next-20140327/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 next/next-20140327/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.161 Filename 'next/next-20140327/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *### 1.2 MiB/s done Bytes transferred = 29426 (72f2 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x45b960 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a2f1 Starting kernel ... Ÿû¶þð~}Ïr^Ëm0ùþ_+ž{²÷ûãF÷¶ûõÞCÛ aß óKÂÞfÁ¿×Ö×ÛÒSß÷jÞß÷Ûû×ïºßÞkÓÃtBkû÷KïÏþßyí«®ûÛÚÓkŸÍïïÃý¶ÛOþÛïÚkßoÐi_m¢ÓïÖÛûYûkýpßOÛ»û%í>ûöÛÍÛëö²ûZßðÐ&»ò¿ßïù{ßÒú£ÙOyma_Y}Û;úXqhþy1wüò1ö;º·Ñ$ñÒí[Ÿþùç=4KîÃúÓ¢Ó÷OqËòPñ}ïZ7s±wß}ÛÆþ¥?Û7¶Ùsêím¿ÛÛÛM| í{õÝiiÛWÏß³êyÛSðû¶yû&{ûßëS¶×¿ºú×[fotYô&ò7í_**kß~û[û×Ó÷ß_Li»{ðgvé÷¢Ðïû³{¿®·û÷œ»6æû ß%>{Ö{ÈzrÐÖÖ5ÞCVÒÏßû£Û÷ï#g÷ûÄyÍûs{«Û6²ËþýðFZÖ5_"ß»ÒðzÚÛMËfÛçï÷[jÛ£_ëíÁößûÒ ôÙýþnode: wandboard status: on ~$off # PYBOOT: Exception: timeout

10 years, 8 months

arm-soc build: 7 warnings 0 failures (arm-soc/v3.14-rc5-1279-g872ac2b)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: 872ac2b Merge tag 'sunxi-clk-for-3.15' of https://bitbucket.org/emiliolopez/linux into for-next Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.14-rc5-1279-g872ac2b/ Runtime: 37m 55s Passed: 124 Failed: 0 Warnings: 7 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/staging/imx-drm/imx-drm-core.c:87:25: warning: unused variable 'imxdrm' [-Wunused-variable] 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b60): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 8 months

next boot: 36 pass, 9 fail (next-20140327)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20140327 Failed boot tests (console logs at the end) =========================================== sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig imx6dl-wandboard,wand-dual: FAIL: imx_v6_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: imx_v6_v7_defconfig imx6q-wandboard: FAIL: imx_v6_v7_defconfig ste-snowball: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: multi_v7_defconfig imx6q-wandboard: OFFLINE: multi_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm 0 min 52.1 sec: PASS am335x-boneblack 0 min 25.9 sec: PASS omap3-beagle-xm 0 min 59.0 sec: PASS legacy,3530beagle 0 min 45.8 sec: PASS (Warnings: 1) omap4-panda 1 min 8.5 sec: PASS omap3-overo-tobi 0 min 23.3 sec: PASS (Warnings: 1) am335x-bone 0 min 27.6 sec: PASS omap3-overo-storm-tobi 0 min 25.1 sec: PASS omap5-uevm 1 min 0.1 sec: PASS (Warnings: 1) omap4-panda-es 1 min 5.7 sec: PASS legacy,3730storm 0 min 20.4 sec: PASS legacy,3530overo 0 min 21.3 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 37.1 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 39.9 sec: FAIL tegra_defconfig --------------- tegra30-beaver 0 min 17.2 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 42.9 sec: FAIL imx6dl-wandboard,wand-solo 0 min 42.6 sec: FAIL imx6q-wandboard 0 min 40.8 sec: FAIL sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 22.5 sec: PASS sun4i-a10-cubieboard 0 min 12.9 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 22.7 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 28.8 sec: PASS multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 15.6 sec: PASS ste-snowball 0 min 50.6 sec: FAIL tegra30-beaver 0 min 19.8 sec: PASS am335x-boneblack 0 min 24.0 sec: PASS omap3-beagle-xm 0 min 50.7 sec: PASS sun7i-a20-cubieboard2 0 min 39.9 sec: FAIL armada-370-mirabox 0 min 22.3 sec: PASS omap4-panda 0 min 52.8 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.3 sec: PASS sun4i-a10-cubieboard 0 min 14.5 sec: PASS bcm28155-ap 0 min 27.8 sec: PASS omap3-overo-tobi 0 min 25.4 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 42.4 sec: FAIL am335x-bone 0 min 26.6 sec: PASS omap3-overo-storm-tobi 0 min 23.9 sec: PASS omap5-uevm 1 min 43.1 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 31.4 sec: OFFLINE omap4-panda-es 0 min 56.2 sec: PASS imx6dl-wandboard,wand-dual 0 min 42.6 sec: FAIL u8500_defconfig --------------- ste-snowball 0 min 30.6 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.4 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.5 sec: PASS da850-evm 0 min 16.2 sec: PASS Console logs for failures ========================= multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- setenv ethaddr 22:71:81:DA:53:EA sun7i#setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40800000 192.168.1.2:tmp/cubie2-q144tr/zImage tftp 0x40800000 192.168.1.2:tmp/cubie2-q144tr/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-q144tr/zImage'. Load address: 0x40800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 2.7 MiB/s done Bytes transferred = 4595056 (461d70 hex) sun7i# tftp 0x43000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x43000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-q144tr/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-q144tr/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-q144tr/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.5 MiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40800000 0x43000000 0x41000000 bootz 0x40800000 0x43000000 0x41000000 Kernel image @ 0x40800000 [ 0x000000 - 0x461d70 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 39.86 seconds. # PYBOOT: Result: FAIL imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ version U-Boot 2013.04-00012-g0b44183 (May 15 2013 - 16:00:22) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.156 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 =>if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x10800000 192.168.1.2:tmp/wand-dual-kYXzWM/zImage tftp 0x10800000 192.168.1.2:tmp/wand-dual-kYXzWM/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-kYXzWM/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.5 MiB/s done Bytes transferred = 5223928 (4fb5f8 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x11000000 192.168.1.2:tmp/wand-dual-kYXzWM/imx6dl-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-dual-kYXzWM/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-kYXzWM/imx6dl-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1.4 MiB/s done Bytes transferred = 26637 (680d hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none =>bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100980c Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 42.87 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log: ------------------------------------------------------------ version U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.164 =>setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 => if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x10800000 192.168.1.2:tmp/wand-solo-Wz2qYi/zImage tftp 0x10800000 192.168.1.2:tmp/wand-solo-Wz2qYi/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-Wz2qYi/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.5 MiB/s done Bytes transferred = 5223928 (4fb5f8 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x11000000 192.168.1.2:tmp/wand-solo-Wz2qYi/imx6dl-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-solo-Wz2qYi/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-Wz2qYi/imx6dl-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1.3 MiB/s done Bytes transferred = 26637 (680d hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.164:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100980c Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 42.62 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: FAIL: last 80 lines of boot log: ------------------------------------------------- U-Boot 2013.07-00001-gc362749 (Sep 06 2013 - 07:50:29) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 => setenv bootargs console=ttymxc0,115200 setenv bootargs console=ttymxc0,115200 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.163 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 => if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi =>tftp 0x10800000 192.168.1.2:tmp/wand-quad-W8AhmW/zImage tftp 0x10800000 192.168.1.2:tmp/wand-quad-W8AhmW/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'tmp/wand-quad-W8AhmW/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 2.7 MiB/s done Bytes transferred = 5223928 (4fb5f8 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x11000000 192.168.1.2:tmp/wand-quad-W8AhmW/imx6q-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-quad-W8AhmW/imx6q-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'tmp/wand-quad-W8AhmW/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *### 2.6 MiB/s done Bytes transferred = 29426 (72f2 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x4fb5f8 ] ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a2f1 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 40.84 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- U-Boot 2009.11 (sept. 19 2011 - 17:03:11) CPU: ST-Ericsson db8500 v2 (Dual ARM Cortex A9) 998.400 Mhz I2C: ready DRAM: 1 GB MMC: MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $ version version U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9e setenv ethaddr 6e:e6:84:36:8e:9e Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U8500 $if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U8500 $ if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U8500 $setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U8500 $dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-ii7ouu/tmpwoFilL-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-ii7ouu/tmpwoFilL-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-ii7ouu/tmpwoFilL-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 4610753 (465ac1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4610689 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 50.57 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i#if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40800000 192.168.1.2:tmp/cubie2-KO4ZbA/zImage tftp 0x40800000 192.168.1.2:tmp/cubie2-KO4ZbA/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-KO4ZbA/zImage'. Load address: 0x40800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 2.7 MiB/s done Bytes transferred = 4569440 (45b960 hex) sun7i# tftp 0x43000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x43000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-KO4ZbA/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-KO4ZbA/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-KO4ZbA/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.2 MiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40800000 0x43000000 0x41000000 bootz 0x40800000 0x43000000 0x41000000 Kernel image @ 0x40800000 [ 0x000000 - 0x45b960 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 39.91 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log: ------------------------------------------------------------ => version version U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.164 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 =>if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x10800000 192.168.1.2:tmp/wand-solo-sCiqDE/zImage tftp 0x10800000 192.168.1.2:tmp/wand-solo-sCiqDE/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-sCiqDE/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 1.5 MiB/s done Bytes transferred = 4569440 (45b960 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x11000000 192.168.1.2:tmp/wand-solo-sCiqDE/imx6dl-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-solo-sCiqDE/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-sCiqDE/imx6dl-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1.4 MiB/s done Bytes transferred = 26637 (680d hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.164:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100980c Starting kernel ... Ôú·ðay8ò^œ²3fMs'=ØôØ€*Ê€$Q¥ù°Upt6Bfz@Vàk??TÖrx+_ ïøá2QTgÔÖãûû«ßnà²Ôgkt2eHwXhV{V+_BÖg?P2|XÖÖö{kßs@PÖgpVTxkvV+_nü4â:j<20pT!d^t}vöÙ<?jt6A~>>v(,(h>XPVg?Vmé_7P\ht|Uw<d0Ñp020hz I6~><RöÔMz7|r.ËBcVg?V?V?PP÷²WýþÔ§ÙûÐ»ÉV#svV;G'Ùóòøñwy@#Tg?TZR£o[WtV7XûÔ¿À?VTs{f;O'XwrùVwnWTg?ÐZÓÔwtW]7PV?@?P×óûÖ»ÇVk{7yVwfa`ÐVgwtW}~P'Y{PMÖù÷{V:W'Ð÷rVc3z`,ÐgxkW}×ü·ØûÐ»ÍPTszn;WwWussTqw>r=0üŽ4~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 42.36 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: OFFLINE: last 80 lines of boot log: ---------------------------------------------------- Connected to wand-quad console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-quad console)> hardreset (user:khilman) Reboot wand-quad Reboot: wand-quad ; phidget 2 3 : off, sleep, on U-Boot 2013.07-00001-gc362749 (Sep 06 2013 - 07:50:29) CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR Board: Wandboard DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - bad CRC, using default environment In: serial 0 => ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: OFFLINE imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ => version version U-Boot 2013.04-00012-g0b44183 (May 15 2013 - 16:00:22) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.156 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 => if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x10800000 192.168.1.2:tmp/wand-dual-QqQiXt/zImage tftp 0x10800000 192.168.1.2:tmp/wand-dual-QqQiXt/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-QqQiXt/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 1.5 MiB/s done Bytes transferred = 4569440 (45b960 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x11000000 192.168.1.2:tmp/wand-dual-QqQiXt/imx6dl-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-dual-QqQiXt/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-QqQiXt/imx6dl-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1.3 MiB/s done Bytes transferred = 26637 (680d hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100980c Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 42.56 seconds. # PYBOOT: Result: FAIL

10 years, 9 months

next boot: 0 passed 0 failed (next/next-20140327)

by Olof's autobooter

Failed boards: cubox dove_defconfig : BUILD FAILED Successful boards: Offline boards: apc vt8500_v6_v7_defconfig : OFFLINE 1:06.29 arndale exynos_defconfig : OFFLINE 1:05.63 bbb omap2plus_defconfig : OFFLINE 1:03.77 bbb multi_v7_defconfig : OFFLINE 1:03.73 beaver tegra_defconfig : OFFLINE 1:03.74 beaver multi_v7_defconfig : OFFLINE 1:03.76 capri bcm_defconfig : OFFLINE 1:03.71 capri multi_v7_defconfig : OFFLINE 1:03.70 cubie sunxi_defconfig : OFFLINE 1:03.76 cubie multi_v7_defconfig : OFFLINE 1:03.73 cubie2 sunxi_defconfig : OFFLINE 1:03.77 cubie2 multi_v7_defconfig : OFFLINE 1:03.75 cubie2 multi_lpae_defconfig : OFFLINE 1:03.72 dalmore tegra_defconfig : OFFLINE 1:03.70 dalmore multi_v7_defconfig : OFFLINE 1:03.68 dalmore multi_lpae_defconfig : OFFLINE 1:03.76 hummingboard imx_v6_v7_defconfig : OFFLINE 1:04.01 hummingboard multi_v7_defconfig : OFFLINE 1:03.70 omap5uevm omap2plus_defconfig : OFFLINE 1:03.72 omap5uevm multi_v7_defconfig : OFFLINE 1:03.74 omap5uevm multi_lpae_defconfig : OFFLINE 1:03.71 panda omap2plus_defconfig : OFFLINE 1:05.86 panda multi_v7_defconfig : OFFLINE 1:05.78 sama5 sama5_defconfig : OFFLINE 1:05.71 seaboard tegra_defconfig : OFFLINE 1:03.73 seaboard multi_v7_defconfig : OFFLINE 1:03.70 snow exynos_defconfig : OFFLINE 1:05.40 snowball u8500_defconfig : OFFLINE 2:33.99 snowball multi_v7_defconfig : OFFLINE 1:49.42 trimslice tegra_defconfig : OFFLINE 1:03.74 trimslice multi_v7_defconfig : OFFLINE 1:03.72 wandboard imx_v6_v7_defconfig : OFFLINE 1:03.69 wandboard multi_v7_defconfig : OFFLINE 1:03.73 Board legend is available at http://arm-soc.lixom.net/boards.html

10 years, 9 months

← Newer
1
2
3
4
5
6
7
8
...
34
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports March 2014