Kernel-build-reports March 2014

kernel-build-reports@lists.linaro.org

15 participants
336 discussions

next build: 12 warnings 7 failures (next/next-20140327)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: 9eee010 Add linux-next specific files for 20140327 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140327/ Runtime: 43m 3s Passed: 117 Failed: 7 Warnings: 12 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: dove_defconfig kirkwood_defconfig multi_v5_defconfig mv78xx0_defconfig mvebu_v5_defconfig mvebu_v7_defconfig orion5x_defconfig ------------------------------------------------------------------------------- Errors: dove_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' kirkwood_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' multi_v5_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' mv78xx0_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' mvebu_v5_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' mvebu_v7_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' orion5x_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' Warnings: 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 1 include/linux/kernel.h:54:38: warning: division by zero [-Wdiv-by-zero] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 9 months

arm-soc boot: 41 pass, 6 fail (v3.14-rc5-1269-g5e4911e)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.14-rc5-1269-g5e4911e Failed boot tests (console logs at the end) =========================================== sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig sun7i-a20-cubieboard2: FAIL: sunxi_defconfig sun4i-a10-cubieboard: FAIL: sunxi_defconfig ste-snowball: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: OFFLINE: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm 0 min 47.9 sec: PASS am335x-boneblack 0 min 25.8 sec: PASS omap3-beagle-xm 1 min 0.7 sec: PASS legacy,3530beagle 0 min 44.8 sec: PASS (Warnings: 1) omap4-panda 1 min 5.4 sec: PASS omap3-overo-tobi 0 min 23.3 sec: PASS (Warnings: 1) am335x-bone 0 min 27.6 sec: PASS omap3-overo-storm-tobi 0 min 25.4 sec: PASS omap5-uevm 1 min 3.2 sec: PASS (Warnings: 1) omap4-panda-es 1 min 9.5 sec: PASS legacy,3730storm 0 min 20.8 sec: PASS legacy,3530overo 0 min 21.3 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 48.7 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 40.1 sec: FAIL tegra_defconfig --------------- tegra30-beaver 0 min 19.2 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.6 sec: PASS imx6dl-wandboard,wand-solo 0 min 19.0 sec: PASS imx6q-wandboard 0 min 17.5 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 38.0 sec: FAIL sun4i-a10-cubieboard 0 min 38.9 sec: FAIL bcm_defconfig ------------- bcm28155-ap 0 min 24.4 sec: PASS mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 22.3 sec: PASS armada-370-mirabox 0 min 21.6 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 30.2 sec: PASS multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 16.5 sec: PASS ste-snowball 0 min 53.6 sec: FAIL tegra30-beaver 0 min 17.0 sec: PASS am335x-boneblack 0 min 23.9 sec: PASS omap3-beagle-xm 0 min 54.7 sec: PASS sun7i-a20-cubieboard2 0 min 31.4 sec: OFFLINE armada-370-mirabox 0 min 23.5 sec: PASS omap4-panda 0 min 52.7 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.2 sec: PASS sun4i-a10-cubieboard 0 min 39.7 sec: FAIL bcm28155-ap 0 min 26.3 sec: PASS omap3-overo-tobi 0 min 22.1 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.1 sec: PASS am335x-bone 0 min 26.3 sec: PASS omap3-overo-storm-tobi 0 min 25.0 sec: PASS omap5-uevm 1 min 49.1 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.4 sec: PASS omap4-panda-es 1 min 3.0 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.2 sec: PASS u8500_defconfig --------------- ste-snowball 0 min 30.4 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.1 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.0 sec: PASS da850-evm 0 min 15.0 sec: PASS Console logs for failures ========================= multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40800000 192.168.1.2:tmp/cubie2-hrOdXw/zImage tftp 0x40800000 192.168.1.2:tmp/cubie2-hrOdXw/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-hrOdXw/zImage'. Load address: 0x40800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 2.7 MiB/s done Bytes transferred = 4604000 (464060 hex) sun7i# tftp 0x43000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x43000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-hrOdXw/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-hrOdXw/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-hrOdXw/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.5 MiB/s done Bytes transferred = 18205 (471d hex) sun7i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40800000 0x43000000 0x41000000 bootz 0x40800000 0x43000000 0x41000000 Kernel image @ 0x40800000 [ 0x000000 - 0x464060 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 40.13 seconds. # PYBOOT: Result: FAIL sunxi_defconfig --------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun7i# setenv ethaddr 22:71:81:DA:53:EA setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i#if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40800000 192.168.1.2:tmp/cubie2-HfplGy/zImage tftp 0x40800000 192.168.1.2:tmp/cubie2-HfplGy/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-HfplGy/zImage'. Load address: 0x40800000 Loading: *################################################################# ######################################################### 2.7 MiB/s done Bytes transferred = 1780216 (1b29f8 hex) sun7i# tftp 0x43000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x43000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-HfplGy/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-HfplGy/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-HfplGy/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.2 MiB/s done Bytes transferred = 18205 (471d hex) sun7i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40800000 0x43000000 0x41000000 bootz 0x40800000 0x43000000 0x41000000 Kernel image @ 0x40800000 [ 0x000000 - 0x1b29f8 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 38.00 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun4i# setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i#setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-aS2OsX/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-aS2OsX/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-aS2OsX/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 2.9 MiB/s done Bytes transferred = 1780216 (1b29f8 hex) sun4i#tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.8 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-aS2OsX/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-aS2OsX/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-aS2OsX/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15168 (3b40 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b29f8 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb3f ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 38.89 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- CPU: ST-Ericsson db8500 v2 (Dual ARM Cortex A9) 998.400 Mhz I2C: ready DRAM: 1 GB MMC: MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $ version version U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9e setenv ethaddr 6e:e6:84:36:8e:9e Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U8500 $ if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U8500 $ if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U8500 $ setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U8500 $ dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-zU2d93/tmpNnvNMN-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-zU2d93/tmpNnvNMN-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-zU2d93/tmpNnvNMN-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 4619577 (467d39 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4619513 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 53.56 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: OFFLINE: last 80 lines of boot log: ---------------------------------------------------------- Connected to cubie2 console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(cubie2 console)> hardreset (user:khilman) Reboot cubie2 Reboot: cubie2 ; phidget 3 0 : off, sleep, on 0 sun7i# ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: OFFLINE sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-zXVHDs/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-zXVHDs/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-zXVHDs/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 2.7 MiB/s done Bytes transferred = 4578264 (45dbd8 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-zXVHDs/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-zXVHDs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-zXVHDs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15168 (3b40 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45dbd8 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb3f ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 39.66 seconds. # PYBOOT: Result: FAIL

10 years, 9 months

arm-soc boot: 0 passed 2 failed (arm-soc/v3.14-rc5-1269-g5e4911e)

by Olof's autobooter

Failed boards: snowball u8500_defconfig : FAILED 3:16.30 snowball multi_v7_defconfig : FAILED 1:16.72 Successful boards: Offline boards: apc vt8500_v6_v7_defconfig : OFFLINE 1:06.17 arndale exynos_defconfig : OFFLINE 1:05.59 bbb omap2plus_defconfig : OFFLINE 1:03.71 bbb multi_v7_defconfig : OFFLINE 1:03.72 beaver tegra_defconfig : OFFLINE 1:03.72 beaver multi_v7_defconfig : OFFLINE 1:03.73 capri bcm_defconfig : OFFLINE 1:03.68 capri multi_v7_defconfig : OFFLINE 1:03.73 cubie sunxi_defconfig : OFFLINE 1:03.71 cubie multi_v7_defconfig : OFFLINE 1:03.70 cubie2 sunxi_defconfig : OFFLINE 1:03.77 cubie2 multi_v7_defconfig : OFFLINE 1:03.73 cubie2 multi_lpae_defconfig : OFFLINE 1:03.77 dalmore tegra_defconfig : OFFLINE 1:03.71 dalmore multi_v7_defconfig : OFFLINE 1:03.74 dalmore multi_lpae_defconfig : OFFLINE 1:03.76 hummingboard imx_v6_v7_defconfig : OFFLINE 1:03.76 hummingboard multi_v7_defconfig : OFFLINE 1:03.69 omap5uevm omap2plus_defconfig : OFFLINE 1:03.72 omap5uevm multi_v7_defconfig : OFFLINE 1:03.74 omap5uevm multi_lpae_defconfig : OFFLINE 1:03.67 panda omap2plus_defconfig : OFFLINE 1:06.28 panda multi_v7_defconfig : OFFLINE 1:05.82 sama5 sama5_defconfig : OFFLINE 1:05.44 seaboard tegra_defconfig : OFFLINE 1:03.72 seaboard multi_v7_defconfig : OFFLINE 1:03.71 snow exynos_defconfig : OFFLINE 1:05.64 trimslice tegra_defconfig : OFFLINE 1:03.70 trimslice multi_v7_defconfig : OFFLINE 1:03.72 wandboard imx_v6_v7_defconfig : OFFLINE 1:03.70 wandboard multi_v7_defconfig : OFFLINE 1:03.71 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.128 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3node: snowball status: on U8500 $ tftp 0x00100000 tmp/snowball-Sb2eyW/tmpMkgL7O-uImage tftp 0x00100000 tmp/snowball-Sb2eyW/tmpMkgL7O-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.128 Filename 'tmp/snowball-Sb2eyW/tmpMkgL7O-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 4619577 (467d39 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4619513 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 18.389343] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2 [ 18.398345] Registering SWP/SWPB emulation handler [ 18.419219] l2x0-prefetch: initialized. [ 18.434204] mcde_display_hdmi_init [ 18.440307] regulator_init_complete: LDO-USB: disabling [ 18.446289] regulator_init_complete: db8500-esram34: disabling [ 18.452209] regulator_init_complete: db8500-esram12: disabling [ 18.458740] ab8500-rtc ab8500-rtc.0: setting system clock to 2014-03-27 03:00:29 UTC (1395889229) [ 18.991088] net eth0: SMSC911x/921x identified at 0xe08c0000, IRQ: 300 [ 19.973297] av8100_hdmi av8100_hdmi.1: HDMI display probed [ 20.001342] Sending DHCP requests . [ 20.071838] av8100 0-0070: chip version:2 [ 21.068237] Console: switching to colour frame buffer device 160x45 [ 21.152770] av8100_hdmi av8100_hdmi.1: Framebuffer created (av8100_hdmi) [ 22.501403] .node: snowball status: on ., OK [ 29.951416] IP-Config: Got DHCP answer from 172.16.1.7, my address is 172.16.1.119 [ 29.961059] IP-Config: Complete: [ 29.964538] device=eth0, addr=172.16.1.119, mask=255.255.255.0, gw=172.16.1.1, [ 29.972167] host=172.16.1.119, domain=lixom.net, nis-domain=(none), [ 29.978973] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 29.988159] EXT3-fs (mmcblk0p3): error: couldn't mount because of unsupported optional features (240) [ 30.223297] EXT2-fs (mmcblk0p3): error: couldn't mount because of unsupported optional features (244) [ 30.414550] EXT4-fs (mmcblk0p3): warning: maximal mount count reached, running e2fsck is recommended [ 30.428588] EXT4-fs (mmcblk0p3): recovery complete [ 30.437133] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 30.445404] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 30.455505] devtmpfs: mounted [ 30.458709] Freeing init memory: 216K Last login: Wed Mar 26 07:38:42 UTC 2014 on tty1 Welcome to Linaro 11.09 (development branch) (GNU/Linux 2.6.38-1001-ux500 armv7l) * Documentation: https://wiki.linaro.org/ root@linaro-nano:~# root root -bash: root: command not found root@linaro-nano:~# node: snowball status: on ~$off # PYBOOT: Exception: timeout

10 years, 9 months

arm-soc build: 7 warnings 0 failures (arm-soc/v3.14-rc5-1269-g5e4911e)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: 5e4911e Merge branch 'next/soc' into for-next Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.14-rc5-1269-g5e4911e/ Runtime: 35m 19s Passed: 124 Failed: 0 Warnings: 7 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/staging/imx-drm/imx-drm-core.c:87:25: warning: unused variable 'imxdrm' [-Wunused-variable] 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b60): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 9 months

arm-soc boot: 7 passed 7 failed (arm-soc/v3.14-rc5-1264-ge2ef791)

by Olof's autobooter

Failed boards: apc vt8500_v6_v7_defconfig : FAILED 3:05.81 cubie sunxi_defconfig : FAILED 1:00.40 cubie multi_v7_defconfig : FAILED 1:14.27 cubie2 sunxi_defconfig : FAILED 0:58.76 cubie2 multi_v7_defconfig : FAILED 1:05.86 panda multi_v7_defconfig : FAILED 3:10.87 sama5 sama5_defconfig : FAILED 2:59.67 Successful boards: arndale exynos_defconfig : passed 1:01.78 bbb omap2plus_defconfig : passed 1:30.65 beaver tegra_defconfig : passed 0:52.82 panda omap2plus_defconfig : passed 1:15.03 seaboard tegra_defconfig : passed 1:03.02 trimslice tegra_defconfig : passed 0:59.78 wandboard imx_v6_v7_defconfig : passed 0:56.36 Offline boards: bbb multi_v7_defconfig : OFFLINE 1:04.12 beaver multi_v7_defconfig : OFFLINE 1:07.29 capri bcm_defconfig : OFFLINE 1:08.82 capri multi_v7_defconfig : OFFLINE 1:04.53 cubie2 multi_lpae_defconfig : OFFLINE 1:04.91 dalmore tegra_defconfig : OFFLINE 1:06.51 dalmore multi_v7_defconfig : OFFLINE 1:04.40 dalmore multi_lpae_defconfig : OFFLINE 1:03.70 hummingboard imx_v6_v7_defconfig : OFFLINE 1:05.18 hummingboard multi_v7_defconfig : OFFLINE 1:04.46 omap5uevm omap2plus_defconfig : OFFLINE 1:04.84 omap5uevm multi_v7_defconfig : OFFLINE 1:04.06 omap5uevm multi_lpae_defconfig : OFFLINE 1:04.08 seaboard multi_v7_defconfig : OFFLINE 1:10.28 snow exynos_defconfig : OFFLINE 1:19.61 snowball u8500_defconfig : OFFLINE 1:22.07 snowball multi_v7_defconfig : OFFLINE 1:38.31 trimslice multi_v7_defconfig : OFFLINE 1:10.38 wandboard multi_v7_defconfig : OFFLINE 1:49.32 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board apc-vt8500_v6_v7_defconfig failure log: ------------------------------------------------- [ 0.830000] wmt-sdhc d800a000.sdhc: WMT SDHC Controller initialized [ 0.830000] usbcore: registered new interface driver usbhid [ 0.840000] usbhid: USB HID core driver [ 0.840000] TCP: cubic registered [ 0.840000] NET: Registered protocol family 10 [ 0.850000] sit: IPv6 over IPv4 tunneling driver [ 0.850000] Key type dns_resolver registered [ 0.860000] mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0 [ 0.860000] vt8500-rtc d8100000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946[ 0.870000] Waiting for root device /dev/sda1... [ 1.020000] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 1.170000] usb-storage 1-1:1.0: USB Mass Storage device detected [ 1.180000] scsi0 : usb-storage 1-1:1.0 [ 2.220000] scsi 0:0:0:0: Direct-Access Patriot Memory PMAP PQ: 0 ANSI: 0 CCS [ 4.210000] sd 0:0:0:0: [sda] 15646720 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 4.220000] sd 0:0:0:0: [sda] Write Protect is off [ 4.220000] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 [ 4.230000] sd 0:0:0:0: [sda] No Caching mode page found [ 4.240000] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 4.260000] sd 0:0:0:0: [sda] No Caching mode page found [ 4.260000] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 4.300000] sda: sda1 [ 4.320000] sd 0:0:0:0: [sda] No Caching mode page found [ 4.320000] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 4.330000] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 4.340000] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 4.770000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 4.780000] VFS: Mounted root (ext3 filesystem) on device 8:1. [ 4.800000] devtmpfs: mounted [ 4.800000] Freeing unused kernel memory: 132K (c0415000 - c0436000) version 2[[36minfo[39;49m] Using makefile-style concurrent boot in runlevel S. [....] Starting the hotplug events dispatcher: udevd[ 6.450000] udevd[142]: starting version 175 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 10.270000] random: nonblocking pool is initialized [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 12.750000] EXT4-fs (sda1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- sun4i#tftp 0x40008000 arm-soc/v3.14-rc5-1264-ge2ef791/multi_v7_defconfig/zImage tftp 0x40008000 arm-soc/v3.14-rc5-1264-ge2ef791/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.145 Filename 'arm-soc/v3.14-rc5-1264-ge2ef791/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 2.8 MiB/s done Bytes transferred = 4578264 (45dbd8 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 arm-soc/v3.14-rc5-1264-ge2ef791/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1264-ge2ef791/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.145 Filename 'arm-soc/v3.14-rc5-1264-ge2ef791/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15168 (3b40 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45dbd8 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb3f ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.145 sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x40008000 arm-soc/v3.14-rc5-1264-ge2ef791/sunxi_defconfig/zImage tftp 0x40008000 arm-soc/v3.14-rc5-1264-ge2ef791/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.145 Filename 'arm-soc/v3.14-rc5-1264-ge2ef791/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 2.7 MiB/s done Bytes transferred = 1780208 (1b29f0 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 arm-soc/v3.14-rc5-1264-ge2ef791/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1264-ge2ef791/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.145 Filename 'arm-soc/v3.14-rc5-1264-ge2ef791/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 477.5 KiB/s done Bytes transferred = 15168 (3b40 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b29f0 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb3f ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x40008000 arm-soc/v3.14-rc5-1264-ge2ef791/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.160 Filename 'arm-soc/v3.14-rc5-1264-ge2ef791/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 4 MiB/s done Bytes transferred = 4578264 (45dbd8 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3node: cubie2 status: on sun7i# tftp 0x41000000 arm-soc/v3.14-rc5-1264-ge2ef791/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1264-ge2ef791/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.160 Filename 'arm-soc/v3.14-rc5-1264-ge2ef791/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 3.5 MiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45dbd8 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1node: cubie2 status: on .3 sun7i# tftp 0x40008000 arm-soc/v3.14-rc5-1264-ge2ef791/sunxi_defconfig/zImage tftp 0x40008000 arm-soc/v3.14-rc5-1264-ge2ef791/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.160 Filename 'arm-soc/v3.14-rc5-1264-ge2ef791/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 3.9 MiB/s done Bytes transferred = 1780208 (1b29f0 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 arm-soc/v3.14-rc5-1264-ge2ef791/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1264-ge2ef791/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.160 Filename 'arm-soc/v3.14-rc5-1264-ge2ef791/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 845.7 KiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b29f0 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.377014] No soundcards found. [ 3.380615] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 3.390838] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 3.400451] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 3.416412] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.423370] mmc1: new SDIO card at address 0001 [ 3.423370] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.423370] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 3.431854] devtmpfs: mounted [ 3.431854] Freeing unused kernel memory: 528K (c0a50000 - c0ad4000) INIT: version 2.88 booting [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel S. [....] Starting the hotplug events dispatcher: udevd[ 4.167968] udevd[174]: starting version 175 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 5.888885] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ [ 8.822753] gic_timer_retrigger: lost localtimer interrupt [ 8.857879] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup Listening on LPF/eth0/82:bb:b6:49:9c:a6 Sending on LPF/eth0/82:bb:b6:49:9c:a6 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 [ 10.767242] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 ~$off # PYBOOT: Exception: timeout ======================================================================== Board sama5-sama5_defconfig failure log: ------------------------------------------------- random: nonblocking pool is initialized [....] Starting the hotplug events dispatcher: udevdudevd[707]: starting version 175 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/08:00:08:e1:88:0e Sending on LPF/eth0/08:00:08:e1:88:0e Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 macb f0028000.ethernet eth0: link up (1000/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPACK from 172.16.1.1 bound to 172.16.1.199 -- renewal in 3600 seconds. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting system message bus: dbus[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Loading cpufreq kernel modules...~$off # PYBOOT: Exception: timeout

10 years, 9 months

arm-soc boot: 39 pass, 8 fail (v3.14-rc5-1239-gd2ee370)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.14-rc5-1239-gd2ee370 Failed boot tests (console logs at the end) =========================================== omap5-uevm: OFFLINE: omap2plus_defconfig sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig sun7i-a20-cubieboard2: FAIL: sunxi_defconfig sun4i-a10-cubieboard: FAIL: sunxi_defconfig ste-snowball: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: OFFLINE: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig omap5-uevm: OFFLINE: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm 0 min 56.4 sec: PASS am335x-boneblack 0 min 25.7 sec: PASS omap3-beagle-xm 1 min 2.1 sec: PASS legacy,3530beagle 0 min 40.8 sec: PASS (Warnings: 1) omap4-panda 1 min 5.9 sec: PASS omap3-overo-tobi 0 min 23.3 sec: PASS (Warnings: 1) am335x-bone 0 min 27.3 sec: PASS omap3-overo-storm-tobi 0 min 25.3 sec: PASS omap5-uevm 0 min 31.4 sec: OFFLINE omap4-panda-es 1 min 10.4 sec: PASS legacy,3730storm 0 min 23.8 sec: PASS legacy,3530overo 0 min 21.2 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 51.0 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 43.2 sec: FAIL tegra_defconfig --------------- tegra30-beaver 0 min 17.1 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.5 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.5 sec: PASS imx6q-wandboard 0 min 16.7 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 40.8 sec: FAIL sun4i-a10-cubieboard 0 min 38.5 sec: FAIL bcm_defconfig ------------- bcm28155-ap 0 min 22.6 sec: PASS mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 22.3 sec: PASS armada-370-mirabox 0 min 20.5 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 29.6 sec: PASS multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 16.4 sec: PASS ste-snowball 0 min 50.6 sec: FAIL tegra30-beaver 0 min 20.0 sec: PASS am335x-boneblack 0 min 23.9 sec: PASS omap3-beagle-xm 0 min 50.5 sec: PASS sun7i-a20-cubieboard2 0 min 31.4 sec: OFFLINE armada-370-mirabox 0 min 22.6 sec: PASS omap4-panda 0 min 55.4 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.2 sec: PASS sun4i-a10-cubieboard 0 min 42.4 sec: FAIL bcm28155-ap 0 min 26.8 sec: PASS omap3-overo-tobi 0 min 22.1 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 17.6 sec: PASS am335x-bone 0 min 26.6 sec: PASS omap3-overo-storm-tobi 0 min 21.7 sec: PASS omap5-uevm 0 min 31.4 sec: OFFLINE imx6q-wandboard 0 min 16.9 sec: PASS omap4-panda-es 0 min 52.0 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.4 sec: PASS u8500_defconfig --------------- ste-snowball 0 min 30.1 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.1 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 16.6 sec: PASS da850-evm 0 min 15.7 sec: PASS Console logs for failures ========================= omap2plus_defconfig ------------------- omap5-uevm: OFFLINE: last 80 lines of boot log: ----------------------------------------------- Connected to omap5uevm console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Connected. Command(omap5uevm console)> hardreset (user:khilman) Reboot omap5uevm Connected. Disconnected. Reboot: omap5uevm ; phidget 1 2 : ('off', 4, 'on') , sleep 4, found: 002/026 2 ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: OFFLINE multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40800000 192.168.1.2:tmp/cubie2-3aVs17/zImage tftp 0x40800000 192.168.1.2:tmp/cubie2-3aVs17/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-3aVs17/zImage'. Load address: 0x40800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 2.7 MiB/s done Bytes transferred = 4601720 (463778 hex) sun7i# tftp 0x43000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x43000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-3aVs17/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-3aVs17/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-3aVs17/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.2 MiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40800000 0x43000000 0x41000000 bootz 0x40800000 0x43000000 0x41000000 Kernel image @ 0x40800000 [ 0x000000 - 0x463778 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 43.17 seconds. # PYBOOT: Result: FAIL sunxi_defconfig --------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun7i# setenv ethaddr 22:71:81:DA:53:EA setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40800000 192.168.1.2:tmp/cubie2-c4tiKP/zImage tftp 0x40800000 192.168.1.2:tmp/cubie2-c4tiKP/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-c4tiKP/zImage'. Load address: 0x40800000 Loading: *################################################################# ######################################################### 2.7 MiB/s done Bytes transferred = 1780216 (1b29f8 hex) sun7i#tftp 0x43000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x43000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-c4tiKP/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-c4tiKP/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-c4tiKP/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.5 MiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40800000 0x43000000 0x41000000 bootz 0x40800000 0x43000000 0x41000000 Kernel image @ 0x40800000 [ 0x000000 - 0x1b29f8 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 40.83 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun4i# setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i#setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i#tftp 0x40008000 192.168.1.2:tmp/cubie-peh17i/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-peh17i/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-peh17i/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 2.7 MiB/s done Bytes transferred = 1780216 (1b29f8 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-peh17i/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-peh17i/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-peh17i/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15168 (3b40 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b29f8 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb3f ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 38.55 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- U-Boot 2009.11 (sept. 19 2011 - 17:03:11) CPU: ST-Ericsson db8500 v2 (Dual ARM Cortex A9) 998.400 Mhz I2C: ready DRAM: 1 GB MMC: MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $ version version U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9e setenv ethaddr 6e:e6:84:36:8e:9e Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U8500 $ if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U8500 $ if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U8500 $ setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U8500 $ dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-LLQjgi/tmp2fAyor-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-LLQjgi/tmp2fAyor-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-LLQjgi/tmp2fAyor-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 4619297 (467c21 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4619233 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 50.64 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: OFFLINE: last 80 lines of boot log: ---------------------------------------------------------- Connected to cubie2 console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(cubie2 console)> hardreset (user:khilman) Reboot cubie2 Reboot: cubie2 ; phidget 3 0 : off, sleep, on 0 sun7i# ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: OFFLINE sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-yVWv_o/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-yVWv_o/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-yVWv_o/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 2.8 MiB/s done Bytes transferred = 4577984 (45dac0 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-yVWv_o/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-yVWv_o/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-yVWv_o/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.1 MiB/s done Bytes transferred = 15168 (3b40 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i#bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45dac0 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb3f ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 42.37 seconds. # PYBOOT: Result: FAIL omap5-uevm: OFFLINE: last 80 lines of boot log: ----------------------------------------------- Connected to omap5uevm console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(omap5uevm console)> hardreset (user:khilman) Reboot omap5uevm Reboot: omap5uevm ; phidget 1 2 : ('off', 4, 'on') , sleep 4, found: 002/123 2 ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: OFFLINE

10 years, 9 months

arm-soc build: 7 warnings 0 failures (arm-soc/v3.14-rc5-1264-ge2ef791)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: e2ef791 arm-soc: document zynq and davinci merges Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.14-rc5-1264-ge2ef791/ Runtime: 37m 45s Passed: 124 Failed: 0 Warnings: 7 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/staging/imx-drm/imx-drm-core.c:87:25: warning: unused variable 'imxdrm' [-Wunused-variable] 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b60): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 9 months

arm-soc boot: 27 passed 6 failed (arm-soc/v3.14-rc5-1239-gd2ee370)

by Olof's autobooter

Failed boards: cubie sunxi_defconfig : FAILED 1:03.03 cubie multi_v7_defconfig : FAILED 1:02.18 cubie2 sunxi_defconfig : FAILED 1:00.92 cubie2 multi_v7_defconfig : FAILED 1:00.30 cubie2 multi_lpae_defconfig : FAILED 0:59.23 snowball multi_v7_defconfig : FAILED 1:12.20 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:20.61 arndale exynos_defconfig : passed 1:09.91 bbb omap2plus_defconfig : passed 1:37.59 bbb multi_v7_defconfig : passed 1:18.67 beaver tegra_defconfig : passed 0:54.92 beaver multi_v7_defconfig : passed 0:54.57 capri bcm_defconfig : passed 0:45.08 capri multi_v7_defconfig : passed 0:44.10 dalmore tegra_defconfig : passed 1:18.33 dalmore multi_v7_defconfig : passed 1:16.78 dalmore multi_lpae_defconfig : passed 1:16.74 hummingboard imx_v6_v7_defconfig : passed 1:20.53 hummingboard multi_v7_defconfig : passed 1:05.74 omap5uevm omap2plus_defconfig : warnings 1:15.90 omap5uevm multi_v7_defconfig : warnings 1:37.28 omap5uevm multi_lpae_defconfig : warnings 1:35.83 panda omap2plus_defconfig : passed 1:15.08 panda multi_v7_defconfig : passed 1:17.05 sama5 sama5_defconfig : passed 1:55.16 seaboard tegra_defconfig : passed 1:05.78 seaboard multi_v7_defconfig : passed 1:12.18 snow exynos_defconfig : passed 1:27.26 snowball u8500_defconfig : passed 1:28.92 trimslice tegra_defconfig : passed 1:02.85 trimslice multi_v7_defconfig : passed 1:00.53 wandboard imx_v6_v7_defconfig : passed 0:58.11 wandboard multi_v7_defconfig : passed 1:02.38 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- sun4i#tftp 0x40008000 arm-soc/v3.14-rc5-1239-gd2ee370/multi_v7_defconfig/zImage tftp 0x40008000 arm-soc/v3.14-rc5-1239-gd2ee370/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.145 Filename 'arm-soc/v3.14-rc5-1239-gd2ee370/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 2.8 MiB/s done Bytes transferred = 4577984 (45dac0 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 arm-soc/v3.14-rc5-1239-gd2ee370/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1239-gd2ee370/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.145 Filename 'arm-soc/v3.14-rc5-1239-gd2ee370/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15168 (3b40 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45dac0 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb3f ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.145 sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x40008000 arm-soc/v3.14-rc5-1239-gd2ee370/sunxi_defconfig/zImage tftp 0x40008000 arm-soc/v3.14-rc5-1239-gd2ee370/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.145 Filename 'arm-soc/v3.14-rc5-1239-gd2ee370/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 2.8 MiB/s done Bytes transferred = 1780216 (1b29f8 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 arm-soc/v3.14-rc5-1239-gd2ee370/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1239-gd2ee370/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.145 Filename 'arm-soc/v3.14-rc5-1239-gd2ee370/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 617.2 KiB/s done Bytes transferred = 15168 (3b40 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b29f8 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb3f ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- tftp 0x40008000 arm-soc/v3.14-rc5-1239-gd2ee370/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.160 Filename 'arm-soc/v3.14-rc5-1239-gd2ee370/multi_lpae_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 3.8 MiB/s done Bytes transferred = 4601720 (463778 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 arm-soc/v3.14-rc5-1239-gd2ee370/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 arnode: cubie2 status: on m-soc/v3.14-rc5-1239-gd2ee370/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.160 Filename 'arm-soc/v3.14-rc5-1239-gd2ee370/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 3.5 MiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x463778 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x40008000 arm-soc/v3.14-rc5-1239-gd2ee370/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.160 Filename 'arm-soc/v3.14-rc5-1239-gd2ee370/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 4 MiB/s done Bytes transferred = 4577984 (45dac0 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3node: cubie2 status: on sun7i# tftp 0x41000000 arm-soc/v3.14-rc5-1239-gd2ee370/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1239-gd2ee370/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.160 Filename 'arm-soc/v3.14-rc5-1239-gd2ee370/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 3.5 MiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45dac0 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.160 sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x40008000 arm-soc/v3.14-rc5-1239-gd2ee370/sunxi_defconfig/zImage tftp 0x40008000 arm-soc/v3.14-rc5-1239-gd2ee370/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.160 Filename 'arm-soc/v3.14-rc5-1239-gd2ee370/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 3.8 MiB/s done Bytes transferred = 1780216 (1b29f8 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 arm-soc/v3.14-rc5-1239-gd2ee370/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1239-gd2ee370/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.160 Filename 'arm-soc/v3.14-rc5-1239-gd2ee370/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 710.9 KiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b29f8 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.128 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-f03PJm/tmpCpRtB8-uImage tftp 0x00100000 tmp/snowball-f03PJm/tmpCpRtB8-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.128 Filename 'tmp/snowball-f03PJm/tmpCpRtB8-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 4619297 (467c21 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4619233 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 9 months

arm-soc build: 7 warnings 0 failures (arm-soc/v3.14-rc5-1239-gd2ee370)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: d2ee370 arm-soc: document driver changes Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.14-rc5-1239-gd2ee370/ Runtime: 39m 44s Passed: 124 Failed: 0 Warnings: 7 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/staging/imx-drm/imx-drm-core.c:87:25: warning: unused variable 'imxdrm' [-Wunused-variable] 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b60): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 9 months

mainline boot: 47 pass, 1 fail (v3.14-rc8-11-gf217c44)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc8-11-gf217c44 Failed boot tests (console logs at the end) =========================================== omap4-panda: OFFLINE: multi_v7_defconfig Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm 0 min 15.4 sec: PASS (Warnings: 1) legacy,da850evm 0 min 14.4 sec: PASS (Warnings: 1) omap2plus_defconfig ------------------- legacy,3730xm 0 min 50.5 sec: PASS am335x-boneblack 0 min 25.8 sec: PASS omap3-beagle-xm 0 min 56.7 sec: PASS legacy,3530beagle 0 min 42.8 sec: PASS (Warnings: 1) omap4-panda 1 min 15.8 sec: PASS omap3-overo-tobi 0 min 22.9 sec: PASS (Warnings: 1) am335x-bone 0 min 27.4 sec: PASS omap3-overo-storm-tobi 0 min 25.6 sec: PASS omap5-uevm 1 min 3.1 sec: PASS (Warnings: 1) omap4-panda-es 1 min 13.1 sec: PASS legacy,3730storm 0 min 24.5 sec: PASS legacy,3530overo 0 min 24.8 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 47.5 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 14.5 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.1 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.6 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.7 sec: PASS imx6q-wandboard 0 min 17.2 sec: PASS msm_defconfig ------------- qcom-apq8074-dragonboard 0 min 15.1 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 23.4 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 11.8 sec: PASS sun4i-a10-cubieboard 0 min 12.6 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 28.6 sec: PASS multi_v7_defconfig ------------------ ste-snowball 1 min 20.3 sec: PASS tegra30-beaver 0 min 17.0 sec: PASS am335x-boneblack 0 min 23.4 sec: PASS omap3-beagle-xm 0 min 54.2 sec: PASS sun7i-a20-cubieboard2 0 min 14.5 sec: PASS armada-370-mirabox 0 min 22.0 sec: PASS omap4-panda 0 min 31.4 sec: OFFLINE armada-xp-openblocks-ax3-4 0 min 25.0 sec: PASS sun4i-a10-cubieboard 0 min 14.2 sec: PASS bcm28155-ap 0 min 26.6 sec: PASS omap3-overo-tobi 0 min 22.1 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 17.9 sec: PASS am335x-bone 0 min 26.3 sec: PASS omap3-overo-storm-tobi 0 min 24.3 sec: PASS omap5-uevm 1 min 50.5 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.6 sec: PASS omap4-panda-es 0 min 55.2 sec: PASS imx6dl-wandboard,wand-dual 0 min 23.0 sec: PASS u8500_defconfig --------------- ste-snowball 0 min 30.1 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.2 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 16.8 sec: PASS mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 0 min 22.1 sec: PASS armada-370-mirabox 0 min 20.1 sec: PASS Console logs for failures ========================= multi_v7_defconfig ------------------ omap4-panda: OFFLINE: last 80 lines of boot log: ------------------------------------------------ Connected to 4430panda console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(4430panda console)> hardreset (user:khilman) Reboot 4430panda Reboot: 4430panda ; phidget 0 1 : off, sleep, on U-Boot SPL 2013.04 (May 24 2013 - 14:00:03) OMAP4430 ES2.1 Bypassing DPLL failed 4a008180 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.img U-Boot 2013.04 (May 24 2013 - 14:00:03) CPU : OMAP4430 ES2.1 Board: OMAP4 Panda I2C: ready D ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: OFFLINE

10 years, 9 months

← Newer
1
2
3
4
5
6
7
8
9
...
34
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports March 2014