Kernel-build-reports April 2014

kernel-build-reports@lists.linaro.org

20 participants
319 discussions

mainline build: 11 warnings 0 failures (mainline/v3.14-12430-g40e9963)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 40e9963 Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.14-12430-g40e9963/ Runtime: 42m 15s Passed: 124 Failed: 0 Warnings: 11 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 8 months

next boot: 28 passed 5 failed (next/next-20140409)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:20.72 hummingboard multi_v7_defconfig : FAILED 1:04.66 panda multi_v7_defconfig : FAILED 1:36.13 snowball multi_v7_defconfig : FAILED 1:13.33 wandboard multi_v7_defconfig : FAILED 1:03.73 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:19.42 arndale exynos_defconfig : passed 1:11.87 bbb omap2plus_defconfig : passed 1:42.18 bbb multi_v7_defconfig : passed 1:19.92 beaver tegra_defconfig : passed 0:55.90 beaver multi_v7_defconfig : passed 0:47.47 capri bcm_defconfig : passed 0:46.07 capri multi_v7_defconfig : passed 0:44.10 cubie sunxi_defconfig : passed 0:52.92 cubie multi_v7_defconfig : passed 0:59.36 cubie2 multi_v7_defconfig : passed 1:02.06 cubie2 multi_lpae_defconfig : passed 0:51.29 dalmore tegra_defconfig : passed 1:19.83 dalmore multi_v7_defconfig : passed 1:15.50 dalmore multi_lpae_defconfig : passed 1:16.91 hummingboard imx_v6_v7_defconfig : passed 1:23.67 omap5uevm omap2plus_defconfig : warnings 1:03.83 omap5uevm multi_v7_defconfig : warnings 1:41.24 omap5uevm multi_lpae_defconfig : warnings 1:38.53 panda omap2plus_defconfig : warnings 1:14.19 sama5 sama5_defconfig : passed 1:59.50 seaboard tegra_defconfig : passed 1:04.55 seaboard multi_v7_defconfig : passed 1:07.14 snow exynos_defconfig : passed 1:32.08 snowball u8500_defconfig : passed 1:40.75 trimslice tegra_defconfig : passed 1:02.08 trimslice multi_v7_defconfig : passed 1:04.64 wandboard imx_v6_v7_defconfig : passed 0:59.17 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.017830] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017853] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.017867] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.017889] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.017902] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018844] Switched to clocksource arch_sys_counter [ 0.025950] NET: Registered protocol family 2 [ 0.026420] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026508] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026629] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026714] TCP: reno registered [ 0.026728] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026784] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.026986] NET: Registered protocol family 1 [ 0.027385] RPC: Registered named UNIX socket transport module. [ 0.027399] RPC: Registered udp transport module. [ 0.027405] RPC: Registered tcp transport module. [ 0.027411] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028380] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.028946] bounce pool size: 64 pages [ 0.036731] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.036748] io scheduler noop registered [ 0.036755] io scheduler deadline registered [ 0.036940] io scheduler cfq registered (default) [ 0.038581] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.080430] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.082866] console [ttyS0] disabled [ 0.103071] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.618073] console [ttyS0] enabled [ 0.622789] mousedev: PS/2 mouse device common for all mice [ 0.628614] i2c /dev entries driver [ 0.633491] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.642490] TCP: cubic registered [ 0.645813] NET: Registered protocol family 17 [ 0.650374] Registering SWP/SWPB emulation handler [ 0.656082] ahci-5v: 5000 mV [ 0.659375] usb1-vbus: 5000 mV [ 0.662737] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- C1 U-Boot > tftp 0x10800000 next/next-20140409/multi_v7_defconfig/zImage tftp 0x10800000 next/next-20140409/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.111 Filename 'next/next-20140409/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################## 2 MiB/s done Bytes transferred = 4631744 (46acc0 hex) C1 U-Boot >setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot > tftp 0x11000000 next/next-20140409/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb tftp 0x11000000 next/next-20140409/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.111 Filename 'next/next-20140409/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'. Load address: 0x11000000 Loading: *## 745.1 KiB/s done Bytes transferred = 25956 (6564 hex) C1 U-Boot > printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk C1 U-Boot > bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x46acc0 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009563 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.617340] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 1.624237] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.631927] omap_hsmmc 480d5000.mmc: unable to get vmmc regulator -517 [ 1.638824] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.646728] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.653594] usbcore: registered new interface driver usbhid [ 1.659454] usbhid: USB HID core driver [ 1.667358] TCP: cubic registered [ 1.670867] NET: Registered protocol family 17 [ 1.675720] Key type dns_resolver registered [ 1.680664] Power Management for TI OMAP4+ devices. [ 1.685821] Power Management for TI OMAP4. [ 1.690124] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.697265] Registering SWP/SWPB emulation handler [ 1.703277] vwl1271: 1800 mV [ 1.707733] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.717651] twl 0-0048: PIH (irq 39) nested IRQs [ 1.723327] twl_rtc rtc.15: Power up reset detected. [ 1.729187] twl_rtc rtc.15: Enabling TWL-RTC [ 1.736145] twl_rtc rtc.15: rtc core: registered rtc.15 as rtc0 [ 1.743103] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.749176] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.755279] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.761444] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.766937] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.772399] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.777404] VDAC: 1800 mV [ 1.781158] VANA: 2100 mV [ 1.784698] VCXIO: 1800 mV [ 1.784698] VUSB: 3300 mV [ 1.791656] V1V8: 1800 mV [ 1.795196] V2V1: 2100 mV [ 1.879302] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.049896] hub 1-1:1.0: USB hub found [ 2.053985] hub 1-1:1.0: 5 ports detected [ 2.356109] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.671478] smsc95xx v1.0.4 [ 2.744995] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 86:25:f9:08:f1:7b ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.157 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-kbfD_h/tmp0N8RpD-uImage tftp 0x00100000 tmp/snowball-kbfD_h/tmp0N8RpD-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.157 Filename 'tmp/snowball-kbfD_h/tmp0N8RpD-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################### done Bytes transferred = 4673057 (474e21 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4672993 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- => tftp 0x10800000 next/next-20140409/multi_v7_defconfig/zImage tftp 0x10800000 next/next-20140409/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'next/next-20140409/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################## 6.1 MiB/s done Bytes transferred = 4631744 (46acc0 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x11000000 next/next-20140409/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 next/next-20140409/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'next/next-20140409/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *### 1.1 MiB/s done Bytes transferred = 29394 (72d2 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x46acc0 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a2d1 Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 8 months

next boot: 46 pass, 0 fail (next-20140411)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20140411 Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm 0 min 54.8 sec: PASS am335x-boneblack 0 min 25.8 sec: PASS omap3-beagle-xm 1 min 2.1 sec: PASS legacy,3530beagle 0 min 39.3 sec: PASS (Warnings: 1) omap4-panda 1 min 11.4 sec: PASS omap3-overo-tobi 0 min 23.8 sec: PASS (Warnings: 1) am335x-bone 0 min 27.6 sec: PASS omap3-overo-storm-tobi 0 min 24.5 sec: PASS omap5-uevm 1 min 5.0 sec: PASS (Warnings: 1) omap4-panda-es 1 min 9.2 sec: PASS legacy,3730storm 0 min 23.8 sec: PASS legacy,3530overo 0 min 21.6 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 36.8 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 12.5 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 24.1 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.6 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.9 sec: PASS imx6q-wandboard 0 min 17.0 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 22.8 sec: PASS sun4i-a10-cubieboard 0 min 12.8 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 23.4 sec: PASS mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 22.3 sec: PASS armada-370-mirabox 0 min 20.3 sec: PASS exynos_defconfig ---------------- exynos5420-arndale-octa 1 min 6.2 sec: PASS exynos5250-arndale 0 min 29.8 sec: PASS multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 16.8 sec: PASS tegra30-beaver 0 min 25.9 sec: PASS am335x-boneblack 0 min 24.1 sec: PASS omap3-beagle-xm 0 min 47.7 sec: PASS sun7i-a20-cubieboard2 0 min 12.3 sec: PASS armada-370-mirabox 0 min 22.4 sec: PASS omap4-panda 1 min 2.8 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.5 sec: PASS sun4i-a10-cubieboard 0 min 17.4 sec: PASS bcm28155-ap 0 min 27.5 sec: PASS omap3-overo-tobi 0 min 22.1 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.3 sec: PASS am335x-bone 0 min 26.7 sec: PASS omap3-overo-storm-tobi 0 min 21.1 sec: PASS omap5-uevm 1 min 39.8 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 16.9 sec: PASS omap4-panda-es 0 min 50.2 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.4 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 35.2 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.8 sec: PASS da850-evm 0 min 15.6 sec: PASS

10 years, 8 months

next boot: 30 passed 3 failed (next/next-20140411)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:20.67 panda multi_v7_defconfig : FAILED 3:07.14 snowball multi_v7_defconfig : FAILED 1:13.31 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:17.00 arndale exynos_defconfig : passed 1:05.89 bbb omap2plus_defconfig : passed 1:37.81 bbb multi_v7_defconfig : passed 1:17.34 beaver tegra_defconfig : passed 0:56.76 beaver multi_v7_defconfig : passed 0:51.30 capri bcm_defconfig : passed 0:42.92 capri multi_v7_defconfig : passed 0:44.50 cubie sunxi_defconfig : passed 1:05.26 cubie multi_v7_defconfig : passed 1:09.61 cubie2 multi_v7_defconfig : passed 1:03.82 cubie2 multi_lpae_defconfig : passed 1:01.14 dalmore tegra_defconfig : passed 1:26.45 dalmore multi_v7_defconfig : passed 1:15.91 dalmore multi_lpae_defconfig : passed 1:17.64 hummingboard imx_v6_v7_defconfig : passed 1:23.95 hummingboard multi_v7_defconfig : passed 1:05.27 omap5uevm omap2plus_defconfig : warnings 1:09.60 omap5uevm multi_v7_defconfig : warnings 1:41.79 omap5uevm multi_lpae_defconfig : warnings 1:41.27 panda omap2plus_defconfig : warnings 1:15.90 sama5 sama5_defconfig : passed 1:52.36 seaboard tegra_defconfig : passed 1:57.51 seaboard multi_v7_defconfig : passed 1:05.10 snow exynos_defconfig : passed 1:30.46 snowball u8500_defconfig : passed 1:25.88 trimslice tegra_defconfig : passed 0:59.75 trimslice multi_v7_defconfig : passed 1:01.38 wandboard imx_v6_v7_defconfig : passed 0:57.34 wandboard multi_v7_defconfig : passed 0:48.00 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.017811] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017834] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.017847] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.017868] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.017882] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018849] Switched to clocksource arch_sys_counter [ 0.025941] NET: Registered protocol family 2 [ 0.026415] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026502] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026623] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026707] TCP: reno registered [ 0.026723] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026780] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.026985] NET: Registered protocol family 1 [ 0.027377] RPC: Registered named UNIX socket transport module. [ 0.027392] RPC: Registered udp transport module. [ 0.027398] RPC: Registered tcp transport module. [ 0.027404] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028391] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.028945] bounce pool size: 64 pages [ 0.036745] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.036760] io scheduler noop registered [ 0.036767] io scheduler deadline registered [ 0.036952] io scheduler cfq registered (default) [ 0.038602] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.080483] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.082916] console [ttyS0] disabled [ 0.103113] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.618172] console [ttyS0] enabled [ 0.622905] mousedev: PS/2 mouse device common for all mice [ 0.628728] i2c /dev entries driver [ 0.633619] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.642618] TCP: cubic registered [ 0.645938] NET: Registered protocol family 17 [ 0.650503] Registering SWP/SWPB emulation handler [ 0.656221] ahci-5v: 5000 mV [ 0.659520] usb1-vbus: 5000 mV [ 0.662883] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.760009] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.766082] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.771636] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.777069] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.782073] VDAC: 1800 mV [ 1.782073] VANA: 2100 mV [ 1.789398] VCXIO: 1800 mV [ 1.792785] VUSB: 3300 mV [ 1.796325] V1V8: 1800 mV [ 1.799896] V2V1: 2100 mV [ 1.879333] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.009460] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.018493] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.027435] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.034362] hub 1-1:1.0: USB hub found [ 2.035186] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.044342] hub 1-1:1.0: 5 ports detected [ 2.049774] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.277893] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.288269] mmc0: new high speed SDHC card at address b368 [ 2.294372] mmcblk0: mmc0:b368 00000 7.51 GiB [ 2.300781] mmcblk0: p1 p2 [ 2.321044] twl_rtc rtc.15: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.324279] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 2.333892] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 2.334747] mmc1: new SDIO card at address 0001 [ 2.354339] ALSA device list: [ 2.354339] No soundcards found. [ 2.363037] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 2.372497] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 2.389190] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.402679] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.411895] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 2.429260] devtmpfs: mounted [ 2.429290] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 2.512542] smsc95xx v1.0.4 [ 2.583831] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, aa:ed:ab:ab:c0:d8 INIT: version 2.88 booting ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- node: snowball status: on *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.158 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-9zbWGj/tmpXlOPYp-uImage tftp 0x01000000 tmp/snowball-9zbWGj/tmpXlOPYp-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.158 Filename 'tmp/snowball-9zbWGj/tmpXlOPYp-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4689673 (478f09 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4689609 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 8 months

next build: 11 warnings 0 failures (next/next-20140411)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: 88a8e09 Add linux-next specific files for 20140411 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140411/ Runtime: 40m 53s Passed: 124 Failed: 0 Warnings: 11 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 8 months

mainline boot: 43 pass, 1 fail (v3.14-12380-g9e897e1)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-12380-g9e897e1 Failed boot tests (console logs at the end) =========================================== bcm28155-ap: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm 0 min 52.6 sec: PASS am335x-boneblack 0 min 25.7 sec: PASS omap3-beagle-xm 1 min 0.5 sec: PASS legacy,3530beagle 0 min 40.9 sec: PASS (Warnings: 1) omap4-panda 1 min 9.4 sec: PASS omap3-overo-tobi 0 min 23.3 sec: PASS (Warnings: 1) am335x-bone 0 min 27.5 sec: PASS omap3-overo-storm-tobi 0 min 25.0 sec: PASS omap5-uevm 1 min 6.3 sec: PASS (Warnings: 1) omap4-panda-es 1 min 8.1 sec: PASS legacy,3730storm 0 min 23.1 sec: PASS legacy,3530overo 0 min 21.1 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 36.6 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 12.4 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.2 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 19.0 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.7 sec: PASS imx6q-wandboard 0 min 17.1 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 22.4 sec: PASS sun4i-a10-cubieboard 0 min 17.8 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 22.6 sec: PASS mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 22.3 sec: PASS armada-370-mirabox 0 min 20.4 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 28.4 sec: PASS multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 16.0 sec: PASS tegra30-beaver 0 min 19.7 sec: PASS am335x-boneblack 0 min 24.1 sec: PASS omap3-beagle-xm 0 min 49.1 sec: PASS sun7i-a20-cubieboard2 0 min 12.4 sec: PASS armada-370-mirabox 0 min 22.4 sec: PASS omap4-panda 0 min 56.3 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.4 sec: PASS sun4i-a10-cubieboard 0 min 19.4 sec: PASS bcm28155-ap 0 min 23.4 sec: FAIL omap3-overo-tobi 0 min 22.3 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 17.9 sec: PASS am335x-bone 0 min 26.7 sec: PASS omap3-overo-storm-tobi 0 min 23.9 sec: PASS omap5-uevm 1 min 38.0 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.1 sec: PASS omap4-panda-es 1 min 2.0 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.0 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.1 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.6 sec: PASS Console logs for failures ========================= multi_v7_defconfig ------------------ bcm28155-ap: FAIL: last 80 lines of boot log: --------------------------------------------- [ 0.620000] ehci-orion: EHCI orion driver [ 0.620000] SPEAr-ehci: EHCI SPEAr driver [ 0.620000] tegra-ehci: Tegra EHCI driver [ 0.630000] usbcore: registered new interface driver usb-storage [ 0.630000] mousedev: PS/2 mouse device common for all mice [ 0.640000] i2c /dev entries driver [ 0.640000] bcm-kona-i2c 3e016000.i2c: device registered successfully [ 0.650000] bcm-kona-i2c 3e017000.i2c: device registered successfully [ 0.650000] bcm-kona-i2c 3e018000.i2c: device registered successfully [ 0.660000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.660000] usbcore: registered new interface driver uvcvideo [ 0.670000] USB Video Class driver (1.1.1) [ 0.670000] gspca_main: v2.14.0 registered [ 0.670000] sdhci: Secure Digital Host Controller Interface driver [ 0.680000] sdhci: Copyright(c) Pierre Ossman [ 0.680000] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.710000] mmc0: no vqmmc regulator found [ 0.710000] mmc0: no vmmc regulator found [ 0.770000] mmc0: SDHCI controller on 3f190000.sdio [3f190000.sdio] using ADMA [ 0.770000] sdhci-kona 3f1b0000.sdio: Got CD GPIO #14. [ 0.800000] mmc1: no vqmmc regulator found [ 0.800000] mmc1: no vmmc regulator found [ 0.850000] mmc1: SDHCI controller on 3f1b0000.sdio [3f1b0000.sdio] using ADMA [ 0.850000] usbcore: registered new interface driver usbhid [ 0.860000] usbhid: USB HID core driver [ 0.860000] TCP: cubic registered [ 0.860000] NET: Registered protocol family 17 [ 0.870000] Key type dns_resolver registered [ 0.870000] ThumbEE CPU extension supported. [ 0.870000] Registering SWP/SWPB emulation handler [ 0.880000] PJ4 iWMMXt coprocessor enabled. [ 0.880000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.890000] ALSA device list: [ 0.890000] No soundcards found. [ 0.890000] Waiting for root device /dev/mmcblk0p8... [ 0.910000] mmc0: BKOPS_EN bit is not set [ 0.920000] mmc0: new high speed MMC card at address 0001 [ 0.920000] mmcblk0: mmc0:0001 016G4A 14.8 GiB [ 0.930000] mmcblk0boot0: mmc0:0001 016G4A partition 1 2.00 MiB [ 0.930000] mmcblk0boot1: mmc0:0001 016G4A partition 2 2.00 MiB [ 0.940000] mmcblk0rpmb: mmc0:0001 016G4A partition 3 256 KiB [ 0.940000] Alternate GPT is invalid, using primary GPT. [ 0.950000] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 [ 0.950000] mmcblk0boot1: unknown partition table [ 0.960000] mmcblk0boot0: unknown partition table [ 1.010000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 1.020000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 1.020000] devtmpfs: mounted [ 1.030000] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 1.060000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 1.060000] Alignment trap: not handling instruction e1923f9f at [<c07d22ac>] [ 1.060000] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 1.060000] Internal error: : 1 [#2] SMP ARM [ 1.060000] Modules linked in: [ 1.060000] CPU: 0 PID: 29042 Comm: %s [ 1.060000] Not tainted 3.14.0-12380-g9e897e1 #1 [ 1.060000] task: c09abe44 ti: ea838000 task.ti: 70737573 [ 1.060000] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 1.060000] LR is at __down_read_trylock+0x14/0x54 [ 1.060000] pc : [<c07d22b0>] lr : [<c027cfb4>] psr: 40000193 [ 1.060000] sp : ea839f38 ip : ea83a020 fp : ea83a020 [ 1.060000] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.060000] r7 : c09abe44 r6 : 00000005 r5 : 20736eae r4 : 20736eaa [ 1.060000] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.060000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.060000] Control: 10c5387d Table: babf404a DAC: 00000015 [ 1.060000] Process %s [ 1.060000] (pid: 29042, stack limit = 0x707377c3) [ 1.060000] Stack: (0xea839f38 to 0x70739573) [ 1.060000] [<c07d22b0>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 1.060000] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 1.060000] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 1.060000] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.060000] ---[ end trace 5ade61f7a7070946 ]--- [ 1.060000] Alignment trap: not handling instruction e1923f9f at [<c07d22ac>] [ 1.060000] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: userspace: failed to find root shell: Unhandled fault # PYBOOT: Time: 23.39 seconds. # PYBOOT: Result: FAIL

10 years, 8 months

mainline build: 11 warnings 0 failures (mainline/v3.14-12380-g9e897e1)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 9e897e1 Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osd Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.14-12380-g9e897e1/ Runtime: 41m 7s Passed: 124 Failed: 0 Warnings: 11 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 8 months

mainline boot: 43 pass, 1 fail (v3.14-12376-g4ba8526)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-12376-g4ba8526 Failed boot tests (console logs at the end) =========================================== bcm28155-ap: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm 0 min 53.1 sec: PASS am335x-boneblack 0 min 25.8 sec: PASS omap3-beagle-xm 1 min 1.0 sec: PASS legacy,3530beagle 0 min 45.9 sec: PASS (Warnings: 1) omap4-panda 1 min 14.8 sec: PASS omap3-overo-tobi 0 min 26.4 sec: PASS (Warnings: 1) am335x-bone 0 min 27.2 sec: PASS omap3-overo-storm-tobi 0 min 24.7 sec: PASS omap5-uevm 1 min 3.9 sec: PASS (Warnings: 1) omap4-panda-es 1 min 12.9 sec: PASS legacy,3730storm 0 min 23.0 sec: PASS legacy,3530overo 0 min 21.0 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 37.5 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 12.5 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.2 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.8 sec: PASS imx6dl-wandboard,wand-solo 0 min 19.0 sec: PASS imx6q-wandboard 0 min 17.1 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 22.7 sec: PASS sun4i-a10-cubieboard 0 min 20.7 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 23.5 sec: PASS mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 22.1 sec: PASS armada-370-mirabox 0 min 20.3 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 30.3 sec: PASS multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 17.2 sec: PASS tegra30-beaver 0 min 19.6 sec: PASS am335x-boneblack 0 min 24.1 sec: PASS omap3-beagle-xm 0 min 47.2 sec: PASS sun7i-a20-cubieboard2 0 min 12.1 sec: PASS armada-370-mirabox 0 min 22.4 sec: PASS omap4-panda 0 min 57.3 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.3 sec: PASS sun4i-a10-cubieboard 0 min 19.2 sec: PASS bcm28155-ap 0 min 23.1 sec: FAIL omap3-overo-tobi 0 min 22.6 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.0 sec: PASS am335x-bone 0 min 26.7 sec: PASS omap3-overo-storm-tobi 0 min 24.4 sec: PASS omap5-uevm 1 min 36.7 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.3 sec: PASS omap4-panda-es 0 min 52.1 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.3 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.1 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.4 sec: PASS Console logs for failures ========================= multi_v7_defconfig ------------------ bcm28155-ap: FAIL: last 80 lines of boot log: --------------------------------------------- [ 0.620000] ehci-orion: EHCI orion driver [ 0.620000] SPEAr-ehci: EHCI SPEAr driver [ 0.620000] tegra-ehci: Tegra EHCI driver [ 0.630000] usbcore: registered new interface driver usb-storage [ 0.630000] mousedev: PS/2 mouse device common for all mice [ 0.640000] i2c /dev entries driver [ 0.640000] bcm-kona-i2c 3e016000.i2c: device registered successfully [ 0.650000] bcm-kona-i2c 3e017000.i2c: device registered successfully [ 0.650000] bcm-kona-i2c 3e018000.i2c: device registered successfully [ 0.660000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.660000] usbcore: registered new interface driver uvcvideo [ 0.670000] USB Video Class driver (1.1.1) [ 0.670000] gspca_main: v2.14.0 registered [ 0.670000] sdhci: Secure Digital Host Controller Interface driver [ 0.680000] sdhci: Copyright(c) Pierre Ossman [ 0.680000] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.710000] mmc0: no vqmmc regulator found [ 0.710000] mmc0: no vmmc regulator found [ 0.770000] mmc0: SDHCI controller on 3f190000.sdio [3f190000.sdio] using ADMA [ 0.770000] sdhci-kona 3f1b0000.sdio: Got CD GPIO #14. [ 0.800000] mmc1: no vqmmc regulator found [ 0.800000] mmc1: no vmmc regulator found [ 0.850000] mmc1: SDHCI controller on 3f1b0000.sdio [3f1b0000.sdio] using ADMA [ 0.850000] usbcore: registered new interface driver usbhid [ 0.860000] usbhid: USB HID core driver [ 0.860000] TCP: cubic registered [ 0.860000] NET: Registered protocol family 17 [ 0.870000] Key type dns_resolver registered [ 0.870000] ThumbEE CPU extension supported. [ 0.870000] Registering SWP/SWPB emulation handler [ 0.880000] PJ4 iWMMXt coprocessor enabled. [ 0.880000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.890000] ALSA device list: [ 0.890000] No soundcards found. [ 0.890000] Waiting for root device /dev/mmcblk0p8... [ 0.910000] mmc0: BKOPS_EN bit is not set [ 0.920000] mmc0: new high speed MMC card at address 0001 [ 0.920000] mmcblk0: mmc0:0001 016G4A 14.8 GiB [ 0.930000] mmcblk0boot0: mmc0:0001 016G4A partition 1 2.00 MiB [ 0.930000] mmcblk0boot1: mmc0:0001 016G4A partition 2 2.00 MiB [ 0.940000] mmcblk0rpmb: mmc0:0001 016G4A partition 3 256 KiB [ 0.940000] Alternate GPT is invalid, using primary GPT. [ 0.950000] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 [ 0.950000] mmcblk0boot1: unknown partition table [ 0.960000] mmcblk0boot0: unknown partition table [ 1.010000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 1.020000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 1.020000] devtmpfs: mounted [ 1.030000] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 1.060000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 1.060000] Alignment trap: not handling instruction e1923f9f at [<c07d22ac>] [ 1.060000] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 1.060000] Internal error: : 1 [#2] SMP ARM [ 1.060000] Modules linked in: [ 1.060000] CPU: 0 PID: 29042 Comm: %s [ 1.060000] Not tainted 3.14.0-12376-g4ba8526 #1 [ 1.060000] task: c09abe44 ti: ea838000 task.ti: 70737573 [ 1.060000] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 1.060000] LR is at __down_read_trylock+0x14/0x54 [ 1.060000] pc : [<c07d22b0>] lr : [<c027cfb4>] psr: 40000193 [ 1.060000] sp : ea839f38 ip : ea83a020 fp : ea83a020 [ 1.060000] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.060000] r7 : c09abe44 r6 : 00000005 r5 : 20736eae r4 : 20736eaa [ 1.060000] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.060000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.060000] Control: 10c5387d Table: babf404a DAC: 00000015 [ 1.060000] Process %s [ 1.060000] (pid: 29042, stack limit = 0x707377c3) [ 1.060000] Stack: (0xea839f38 to 0x70739573) [ 1.060000] [<c07d22b0>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 1.060000] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 1.060000] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 1.060000] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.060000] ---[ end trace 18dc33bc8c1e248f ]--- [ 1.060000] Alignment trap: not handling instruction e1923f9f at [<c07d22ac>] [ 1.060000] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: userspace: failed to find root shell: Unhandled fault # PYBOOT: Time: 23.07 seconds. # PYBOOT: Result: FAIL

10 years, 8 months

mainline boot: 15 passed 17 failed (mainline/v3.14-12376-g4ba8526)

by Olof's autobooter

Failed boards: bbb multi_v7_defconfig : FAILED 3:11.26 beaver multi_v7_defconfig : FAILED 2:57.90 capri multi_v7_defconfig : FAILED 2:57.68 cubie multi_v7_defconfig : FAILED 3:01.88 cubie2 sunxi_defconfig : FAILED 1:21.43 cubie2 multi_v7_defconfig : FAILED 3:06.43 cubie2 multi_lpae_defconfig : FAILED 2:53.52 dalmore multi_v7_defconfig : FAILED 3:34.65 dalmore multi_lpae_defconfig : FAILED 3:02.28 hummingboard multi_v7_defconfig : FAILED 2:57.08 omap5uevm multi_v7_defconfig : FAILED 3:53.40 omap5uevm multi_lpae_defconfig : FAILED 3:50.47 panda multi_v7_defconfig : FAILED 3:15.65 seaboard multi_v7_defconfig : FAILED 3:01.74 snowball multi_v7_defconfig : FAILED 1:43.20 trimslice multi_v7_defconfig : FAILED 3:10.00 wandboard multi_v7_defconfig : FAILED 2:59.54 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:17.28 arndale exynos_defconfig : passed 1:08.40 bbb omap2plus_defconfig : passed 1:38.69 beaver tegra_defconfig : passed 0:56.72 capri bcm_defconfig : passed 0:44.88 cubie sunxi_defconfig : passed 1:05.93 dalmore tegra_defconfig : passed 1:20.48 hummingboard imx_v6_v7_defconfig : passed 1:22.21 panda omap2plus_defconfig : warnings 1:19.38 sama5 sama5_defconfig : passed 1:52.48 seaboard tegra_defconfig : passed 1:07.20 snow exynos_defconfig : passed 1:28.19 snowball u8500_defconfig : passed 1:26.57 trimslice tegra_defconfig : passed 1:03.97 wandboard imx_v6_v7_defconfig : passed 0:59.08 Offline boards: omap5uevm omap2plus_defconfig : OFFLINE 2:09.89 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board bbb-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.224577] usbcore: registered new interface driver uvcvideo [ 1.230697] USB Video Class driver (1.1.1) [ 1.234996] gspca_main: v2.14.0 registered [ 1.241332] sdhci: Secure Digital Host Controller Interface driver [ 1.247865] sdhci: Copyright(c) Pierre Ossman [ 1.326836] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.333688] usbcore: registered new interface driver usbhid [ 1.339600] usbhid: USB HID core driver [ 1.348604] TCP: cubic registered [ 1.352109] NET: Registered protocol family 17 [ 1.357209] Key type dns_resolver registered [ 1.362629] ThumbEE CPU extension supported. [ 1.367220] Registering SWP/SWPB emulation handler [ 1.372250] PJ4 iWMMXt coprocessor enabled. [ 1.384506] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.439418] mmc1: BKOPS_EN bit is not set [ 1.446099] mmc1: new high speed MMC card at address 0001 [ 1.452518] mmcblk0: mmc1:0001 MMC02G 1.78 GiB [ 1.457527] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 1.463931] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 1.470930] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.477591] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.484993] libphy: 4a101000.mdio: probed [ 1.489330] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver unknown [ 1.499073] Detected MACID = bc:6a:29:7a:42:a8 [ 1.505316] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.519373] ALSA device list: [ 1.522510] No soundcards found. [ 1.527458] mmcblk0: p1 p2 [ 1.533273] mmcblk0boot1: unknown partition table [ 1.540346] mmcblk0boot0: unknown partition table [ 1.547502] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.557190] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.616734] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.625294] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 1.652118] devtmpfs: mounted [ 1.656301] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 1.731113] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.650678] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.656763] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.664513] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.671612] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.677206] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.683565] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf002e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472 [ 3.693561] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.703854] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.710452] [drm] No driver support for vblank timestamp query. [ 3.716430] host1x drm: No connectors reported connected with modes [ 3.722685] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.741881] Console: switching to colour frame buffer device 128x48 [ 3.753946] host1x drm: fb0: frame buffer device [ 3.758636] host1x drm: registered panic notifier [ 3.763340] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.769523] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.776899] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.788242] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.793652] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.801457] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.823055] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.829409] hub 1-0:1.0: USB hub found [ 3.833184] hub 1-0:1.0: 1 port detected [ 3.837521] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.842915] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.850660] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.873435] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.879701] hub 2-0:1.0: USB hub found [ 3.883478] hub 2-0:1.0: 1 port detected [ 3.891340] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.904061] ALSA device list: [ 3.907027] #0: NVIDIA Tegra Beaver [ 3.913216] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.922101] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.936949] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.945074] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.971624] devtmpfs: mounted [ 3.975070] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.930000] mmcblk0boot0: mmc0:0001 016G4A partition 1 2.00 MiB [ 0.930000] mmcblk0boot1: mmc0:0001 016G4A partition 2 2.00 MiB [ 0.940000] mmcblk0rpmb: mmc0:0001 016G4A partition 3 256 KiB [ 0.940000] Alternate GPT is invalid, using primary GPT. [ 0.950000] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 [ 0.950000] mmcblk0boot1: unknown partition table [ 0.960000] mmcblk0boot0: unknown partition table [ 1.010000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 1.020000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 1.020000] devtmpfs: mounted [ 1.030000] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 1.050000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 1.050000] Alignment trap: not handling instruction e1923f9f at [<c07d22ac>] [ 1.050000] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 1.050000] Internal error: : 1 [#2] SMP ARM [ 1.050000] Modules linked in: [ 1.050000] CPU: 0 PID: 29042 Comm: %s [ 1.050000] Not tainted 3.14.0-12376-g4ba8526 #1 [ 1.050000] task: c09abe44 ti: ea838000 task.ti: 70737573 [ 1.050000] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 1.050000] LR is at __down_read_trylock+0x14/0x54 [ 1.050000] pc : [<c07d22b0>] lr : [<c027cfb4>] psr: 40000193 [ 1.050000] sp : ea839f38 ip : c0b06390 fp : ea83a020 [ 1.050000] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.050000] r7 : c09abe44 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 1.050000] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.050000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.050000] Control: 10c5387d Table: babf404a DAC: 00000015 [ 1.050000] Process %s [ 1.050000] (pid: 29042, stack limit = 0x707377c3) [ 1.050000] Stack: (0xea839f38 to 0x70739573) [ 1.050000] [<c07d22b0>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 1.050000] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 1.050000] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 1.050000] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.050000] ---[ end trace a4e9e11bf3c77fba ]--- [ 1.050000] Alignment trap: not handling instruction e1923f9f at [<c07d22ac>] [ 1.050000] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.968910] usbcore: registered new interface driver usb-storage [ 0.976035] mousedev: PS/2 mouse device common for all mice [ 0.982888] i2c /dev entries driver [ 0.988055] usbcore: registered new interface driver uvcvideo [ 0.993870] USB Video Class driver (1.1.1) [ 0.997961] gspca_main: v2.14.0 registered [ 1.004845] sdhci: Secure Digital Host Controller Interface driver [ 1.011018] sdhci: Copyright(c) Pierre Ossman [ 1.015738] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.021853] usbcore: registered new interface driver usbhid [ 1.027445] usbhid: USB HID core driver [ 1.033860] TCP: cubic registered [ 1.037180] NET: Registered protocol family 17 [ 1.041781] Key type dns_resolver registered [ 1.046208] ThumbEE CPU extension supported. [ 1.050492] Registering SWP/SWPB emulation handler [ 1.055297] PJ4 iWMMXt coprocessor enabled. [ 1.060564] ahci-5v: 5000 mV [ 1.064027] usb1-vbus: 5000 mV [ 1.067539] usb2-vbus: 5000 mV [ 1.071217] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 1.079062] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 1.086719] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.100059] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 1.107940] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 3.432832] sun4i-emac 1c0b000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 3.452821] Sending DHCP requests ., OK [ 5.173260] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.173 [ 5.181043] IP-Config: Complete: [ 5.184305] device=eth0, hwaddr=08:00:08:1e:2f:44, ipaddr=172.16.1.173, mask=255.255.255.0, gw=172.16.1.1 [ 5.194311] host=172.16.1.173, domain=lixom.net, nis-domain=(none) [ 5.200917] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 5.207447] nameserver0=172.16.1.1 [ 5.211570] ALSA device list: [ 5.214553] No soundcards found. [ 5.223291] VFS: Mounted root (nfs filesystem) on device 0:11. [ 5.229514] devtmpfs: mounted [ 5.233102] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- [ 3.469771] ., OK [ 3.490230] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.109 [ 3.498041] IP-Config: Complete: [ 3.501314] device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.1.109, mask=255.255.255.0, gw=172.16.1.1 [ 3.511313] host=172.16.1.109, domain=lixom.net, nis-domain=(none) [ 3.517918] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 3.524447] nameserver0=172.16.1.1 [ 3.528581] ALSA device list: [ 3.531561] No soundcards found. [ 3.540686] VFS: Mounted root (nfs filesystem) on device 0:11. [ 3.547013] devtmpfs: mounted [ 3.550634] Freeing unused kernel memory: 560K (c0a75000 - c0b01000) [ 3.574344] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 3.581151] Alignment trap: not handling instruction e1923f9f at [<c07d9124>] [ 3.588278] Unhandled fault: alignment exception (0x221) at 0x20736eae [ 3.594798] Internal error: : 221 [#2] SMP ARM [ 3.599235] Modules linked in: [ 3.602304] CPU: 0 PID: 29042 Comm: %s [ 3.602304] Not tainted 3.14.0-12376-g4ba8526 #1 [ 3.610827] task: c09b2e40 ti: ea03e000 task.ti: 70737573 [ 3.616230] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 3.621279] LR is at __down_read_trylock+0x14/0x54 [ 3.626065] pc : [<c07d9128>] lr : [<c027dd08>] psr: 40000193 [ 3.626065] sp : ea03ffb8 ip : c0b0e3e8 fp : ea0400a0 [ 3.637525] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 3.642742] r7 : c09b2e40 r6 : 00000207 r5 : 20736eae r4 : 20736eaa [ 3.649259] r3 : 20000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 3.655778] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 3.662990] Control: 30c5387d Table: 6a3ed500 DAC: fffffffd [ 3.668727] Process %s [ 3.668727] (pid: 29042, stack limit = 0x707377c3) [ 3.676026] Stack: (0xea03ffb8 to 0x70739573) [ 3.680394] [<c07d9128>] (_raw_spin_lock_irqsave) from [<c027dd08>] (__down_read_trylock+0x14/0x54) [ 3.689438] [<c027dd08>] (__down_read_trylock) from [<c0218010>] (do_page_fault+0x78/0x27c) [ 3.697781] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 3.703869] ---[ end trace ceb2e34001cd1173 ]--- [ 3.708482] Alignment trap: not handling instruction e1923f9f at [<c07d9124>] [ 3.715605] Unhandled fault: alignment exception (0x221) at 0x20736eae ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.839979] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.109 [ 3.847818] IP-Config: Complete: [ 3.851097] device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.1.109, mask=255.255.255.0, gw=172.16.1.1 [ 3.861099] host=172.16.1.109, domain=lixom.net, nis-domain=(none) [ 3.867706] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 3.874236] nameserver0=172.16.1.1 [ 3.878371] ALSA device list: [ 3.881351] No soundcards found. [ 3.889773] VFS: Mounted root (nfs filesystem) on device 0:11. [ 3.896048] devtmpfs: mounted [ 3.899660] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 3.923524] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 3.930335] Alignment trap: not handling instruction e1923f9f at [<c07d22ac>] [ 3.937461] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 3.943980] Internal error: : 1 [#2] SMP ARM [ 3.948244] Modules linked in: [ 3.951313] CPU: 0 PID: 29042 Comm: %s [ 3.951313] Not tainted 3.14.0-12376-g4ba8526 #1 [ 3.959835] task: c09abe44 ti: ea03c000 task.ti: 70737573 [ 3.965240] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 3.970289] LR is at __down_read_trylock+0x14/0x54 [ 3.975077] pc : [<c07d22b0>] lr : [<c027cfb4>] psr: 40000193 [ 3.975077] sp : ea03df18 ip : c0b06390 fp : ea03e000 [ 3.986537] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 3.991754] r7 : c09abe44 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 3.998271] r3 : 20000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 4.004791] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 4.012001] Control: 10c5387d Table: 6a47006a DAC: 00000015 [ 4.017738] Process %s [ 4.017738] (pid: 29042, stack limit = 0x707377c3) [ 4.025038] Stack: (0xea03df18 to 0x70739573) [ 4.029408] [<c07d22b0>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 4.038452] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 4.046800] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 4.054450] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 4.060537] ---[ end trace 371f10dc6a627d52 ]--- [ 4.065153] Alignment trap: not handling instruction e1923f9f at [<c07d22ac>] [ 4.072276] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.017832] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017857] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.017870] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.017889] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.017902] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018845] Switched to clocksource arch_sys_counter [ 0.025959] NET: Registered protocol family 2 [ 0.026430] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026519] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026643] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026726] TCP: reno registered [ 0.026740] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026796] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.026999] NET: Registered protocol family 1 [ 0.027393] RPC: Registered named UNIX socket transport module. [ 0.027406] RPC: Registered udp transport module. [ 0.027412] RPC: Registered tcp transport module. [ 0.027418] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028387] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.028940] bounce pool size: 64 pages [ 0.036746] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.036767] io scheduler noop registered [ 0.036774] io scheduler deadline registered [ 0.036959] io scheduler cfq registered (default) [ 0.038600] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.080457] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.082895] console [ttyS0] disabled [ 0.103091] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.618245] console [ttyS0] enabled [ 0.622966] mousedev: PS/2 mouse device common for all mice [ 0.628792] i2c /dev entries driver [ 0.633684] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.642675] TCP: cubic registered [ 0.645999] NET: Registered protocol family 17 [ 0.650562] Registering SWP/SWPB emulation handler [ 0.656273] ahci-5v: 5000 mV [ 0.659567] usb1-vbus: 5000 mV [ 0.662922] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.756610] input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound.5/sound/card0/input0 [ 2.769617] TCP: cubic registered [ 2.773032] NET: Registered protocol family 17 [ 2.778103] Key type dns_resolver registered [ 2.784186] ThumbEE CPU extension supported. [ 2.788512] Registering SWP/SWPB emulation handler [ 2.793376] PJ4 iWMMXt coprocessor enabled. [ 2.804310] dvdd_ts: 1800 mV [ 2.808958] usb1_vbus: 5000 mV [ 2.812306] usb1_vbus: supplied by vdd-sys-5v0 [ 2.818406] usb2_vbus: 5000 mV [ 2.821736] usb2_vbus: supplied by vdd-sys-5v0 [ 2.827912] vdd_hdmi_5v0: 5000 mV [ 2.831504] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.841149] vdd_cam_1v8_reg: 1800 mV [ 2.861481] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.868221] [drm] No driver support for vblank timestamp query. [ 3.000481] Console: switching to colour frame buffer device 240x75 [ 3.087306] host1x drm: fb0: frame buffer device [ 3.092043] host1x drm: registered panic notifier [ 3.096884] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.104751] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.116516] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.122062] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.133100] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.152487] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.161918] hub 1-0:1.0: USB hub found [ 3.166093] hub 1-0:1.0: 1 port detected [ 3.175235] input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input1 [ 3.186480] palmas-rtc rtc.8: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.229299] ALSA device list: [ 3.232310] #0: NVIDIA Tegra Dalmore [ 3.240186] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.250584] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.292915] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.301137] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.316988] devtmpfs: mounted [ 3.321681] Freeing unused kernel memory: 560K (c0a75000 - c0b01000) ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.756086] input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound.5/sound/card0/input0 [ 2.769044] TCP: cubic registered [ 2.772456] NET: Registered protocol family 17 [ 2.777530] Key type dns_resolver registered [ 2.783604] ThumbEE CPU extension supported. [ 2.787926] Registering SWP/SWPB emulation handler [ 2.792784] PJ4 iWMMXt coprocessor enabled. [ 2.803833] dvdd_ts: 1800 mV [ 2.808172] usb1_vbus: 5000 mV [ 2.811487] usb1_vbus: supplied by vdd-sys-5v0 [ 2.817491] usb2_vbus: 5000 mV [ 2.820821] usb2_vbus: supplied by vdd-sys-5v0 [ 2.826785] vdd_hdmi_5v0: 5000 mV [ 2.830369] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.839833] vdd_cam_1v8_reg: 1800 mV [ 2.858629] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.865369] [drm] No driver support for vblank timestamp query. [ 2.995913] Console: switching to colour frame buffer device 240x75 [ 3.082932] host1x drm: fb0: frame buffer device [ 3.087691] host1x drm: registered panic notifier [ 3.092596] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.100313] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.111828] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.117488] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.128508] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.152521] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.161818] hub 1-0:1.0: USB hub found [ 3.165934] hub 1-0:1.0: 1 port detected [ 3.175207] input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input1 [ 3.187231] palmas-rtc rtc.8: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.230119] ALSA device list: [ 3.233235] #0: NVIDIA Tegra Dalmore [ 3.241048] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.251052] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.294235] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.302565] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.319286] devtmpfs: mounted [ 3.324101] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.009981] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.034865] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.040974] hub 2-0:1.0: USB hub found [ 1.044768] hub 2-0:1.0: 1 port detected [ 1.049488] mousedev: PS/2 mouse device common for all mice [ 1.056989] i2c /dev entries driver [ 1.061221] usbcore: registered new interface driver uvcvideo [ 1.067019] USB Video Class driver (1.1.1) [ 1.071124] gspca_main: v2.14.0 registered [ 1.076925] sdhci: Secure Digital Host Controller Interface driver [ 1.083114] sdhci: Copyright(c) Pierre Ossman [ 1.088199] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.094734] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.103929] mmc0: no vqmmc regulator found [ 1.144876] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.152828] usbcore: registered new interface driver usbhid [ 1.158440] usbhid: USB HID core driver [ 1.168903] TCP: cubic registered [ 1.172260] NET: Registered protocol family 17 [ 1.176931] Key type dns_resolver registered [ 1.181325] ThumbEE CPU extension supported. [ 1.185651] Registering SWP/SWPB emulation handler [ 1.190451] PJ4 iWMMXt coprocessor enabled. [ 1.198118] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.212812] ALSA device list: [ 1.215872] No soundcards found. [ 1.219955] Waiting for root device /dev/mmcblk0p2... [ 1.272465] mmc0: host does not support reading read-only switch. assuming write-enable. [ 1.286599] mmc0: new high speed SDHC card at address b368 [ 1.292461] mmcblk0: mmc0:b368 00000 7.51 GiB [ 1.298427] mmcblk0: p1 p2 [ 1.336195] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.345296] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.367151] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.375308] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.391300] devtmpfs: mounted [ 1.394672] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 1.441754] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 46.717029] smps8: 600 <--> 1310 mV at 1040 mV [ 46.723016] smps9: 2100 mV [ 46.726841] smps10_out2: 5000 mV [ 46.731076] smps10_out1: 5000 mV [ 46.734941] ldo1: 1500 <--> 1800 mV [ 46.739554] ldo2: 2800 mV [ 46.743892] ldo3: 1500 mV [ 46.747337] ldo4: 1500 <--> 1800 mV [ 46.752572] ldo5: 1800 mV [ 46.758402] ldo6: 1200 mV [ 46.762084] ldo7: 2000 mV [ 46.766416] ldo8: 3000 mV [ 46.770616] ldo9: 1800 <--> 3000 mV at 900 mV [ 46.776772] ldoln: 1800 mV [ 46.781192] ldousb: 3250 mV [ 46.784687] REGEN1: no parameters [ 46.788234] REGEN2: no parameters [ 46.791943] regen3: no parameters [ 46.795738] SYSEN1: no parameters [ 46.799289] SYSEN2: no parameters [ 47.041491] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.048610] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.055921] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 47.101565] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.114999] ALSA device list: [ 47.118130] No soundcards found. [ 47.122159] Waiting for root device /dev/mmcblk1p2... [ 47.158058] mmc2: host does not support reading read-only switch. assuming write-enable. [ 47.168271] mmc2: new high speed SDHC card at address 0001 [ 47.174239] mmcblk1: mmc2:0001 00000 14.6 GiB [ 47.179730] mmcblk1: p1 p2 [ 47.231723] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 47.240578] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 47.263511] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 47.271985] VFS: Mounted root (ext4 filesystem) readonly on device 179:50. [ 47.286564] devtmpfs: mounted [ 47.289939] Freeing unused kernel memory: 560K (c0a75000 - c0b01000) [ 47.323946] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.601106] smps8: 600 <--> 1310 mV at 1040 mV [ 47.607066] smps9: 2100 mV [ 47.610888] smps10_out2: 5000 mV [ 47.615101] smps10_out1: 5000 mV [ 47.618938] ldo1: 1500 <--> 1800 mV [ 47.623535] ldo2: 2800 mV [ 47.627877] ldo3: 1500 mV [ 47.631348] ldo4: 1500 <--> 1800 mV [ 47.636593] ldo5: 1800 mV [ 47.642428] ldo6: 1200 mV [ 47.646132] ldo7: 2000 mV [ 47.650491] ldo8: 3000 mV [ 47.654692] ldo9: 1800 <--> 3000 mV at 900 mV [ 47.660861] ldoln: 1800 mV [ 47.665291] ldousb: 3250 mV [ 47.668778] REGEN1: no parameters [ 47.672342] REGEN2: no parameters [ 47.676033] regen3: no parameters [ 47.679829] SYSEN1: no parameters [ 47.683389] SYSEN2: no parameters [ 47.920236] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.200245] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.207510] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 48.250318] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.263807] ALSA device list: [ 48.266905] No soundcards found. [ 48.270907] Waiting for root device /dev/mmcblk1p2... [ 48.286804] mmc2: host does not support reading read-only switch. assuming write-enable. [ 48.297018] mmc2: new high speed SDHC card at address 0001 [ 48.302978] mmcblk1: mmc2:0001 00000 14.6 GiB [ 48.308454] mmcblk1: p1 p2 [ 48.380451] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 48.389260] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 48.412628] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 48.421098] VFS: Mounted root (ext4 filesystem) readonly on device 179:50. [ 48.430827] devtmpfs: mounted [ 48.434193] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 48.468916] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.759521] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.765014] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.770477] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.775909] VDAC: 1800 mV [ 1.779113] VANA: 2100 mV [ 1.782775] VCXIO: 1800 mV [ 1.782775] VUSB: 3300 mV [ 1.789703] V1V8: 1800 mV [ 1.793273] V2V1: 2100 mV [ 1.799316] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.869018] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.024108] hub 1-1:1.0: USB hub found [ 2.028137] hub 1-1:1.0: 5 ports detected [ 2.129913] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.309143] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.445648] smsc95xx v1.0.4 [ 2.449707] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.528533] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 62:a0:4b:9e:8f:57 [ 2.759521] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.767547] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.979614] twl_rtc rtc.15: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 2.993438] ALSA device list: [ 2.993530] No soundcards found. [ 3.000244] Waiting for root device /dev/mmcblk0p2... [ 3.013427] mmc0: host does not support reading read-only switch. assuming write-enable. [ 3.023834] mmc0: new high speed SDHC card at address b368 [ 3.029968] mmcblk0: mmc0:b368 00000 7.51 GiB [ 3.036376] mmcblk0: p1 p2 [ 3.044494] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 3.062774] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.069793] mmc1: new SDIO card at address 0001 [ 3.139831] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 3.149291] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 3.173034] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.173034] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 3.197906] devtmpfs: mounted [ 3.201080] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 3.250091] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.524726] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.524729] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.524732] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.524735] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.524739] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.524742] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.524745] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.700360] Alignment trap: not handling instruction e1923f9f at [<c07d22ac>] [ 2.707481] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 2.713994] Internal error: : 1 [#2] SMP ARM [ 2.718251] Modules linked in: [ 2.721306] CPU: 0 PID: 29042 Comm: %s [ 2.721306] Not tainted 3.14.0-12376-g4ba8526 #1 [ 2.729822] task: c09abe44 ti: ea03a000 task.ti: 70737573 [ 2.735220] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 2.740264] LR is at __down_read_trylock+0x14/0x54 [ 2.745045] pc : [<c07d22b0>] lr : [<c027cfb4>] psr: 40000193 [ 2.745045] sp : ea03bee8 ip : c0b06390 fp : ea03bfd0 [ 2.756499] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 2.761710] r7 : c09abe44 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 2.768222] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 2.774735] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 2.781940] Control: 10c5387d Table: 2a4ac04a DAC: 00000015 [ 2.787672] Process %s [ 2.787672] (pid: 29042, stack limit = 0x707377c3) [ 2.794966] Stack: (0xea03bee8 to 0x70739573) [ 2.799324] [<c07d22b0>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 2.808368] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 2.816709] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 2.824364] [<c02083d4>] (do_DataAbort) from [<c0212258>] (__dabt_svc+0x38/0x60) [ 2.831743] Exception stack(0xea03bfd0 to 0xea03c018) [ 2.836784] bfc0: 0000017c 00000017 ea03c000 00000193 [ 2.844947] bfe0: ea03c018 c0217c58 00000017 00000000 0000017c 00404100 ea068000 ea03c0f0 [ 2.853108] c000: c0b06390 ea03c018 c02083d4 c0217c84 00000193 ffffffff [ 2.859711] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 2.865792] ---[ end trace 5fdddc3b45c1f229 ]--- [ 2.870399] Alignment trap: not handling instruction e1923f9f at [<c07d22ac>] [ 2.877517] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.157 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $tftp 0x01000000 tmp/snowball-iIca3A/tmpFJLkj3-uImage tftp 0x01000000 tmp/snowball-iIca3A/tmpFJLkj3-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.157 Filename 'tmp/snowball-iIca3A/tmpFJLkj3-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4691233 (479521 hex) U8500 $printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4691169 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board trimslice-multi_v7_defconfig failure log: ------------------------------------------------- [ 4.795592] (pid: 29042, stack limit = 0x707377c3) [ 4.802901] Stack: (0xea03bee8 to 0x70739573) [ 4.807287] [<c07d22b0>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 4.816362] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 4.824726] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 4.832409] [<c02083d4>] (do_DataAbort) from [<c0212258>] (__dabt_svc+0x38/0x60) [ 4.839800] Exception stack(0xea03bfd0 to 0xea03c018) [ 4.844859] bfc0: 0000017c 00000017 ea03c000 00000193 [ 4.853042] bfe0: ea03c018 c0217c58 00000017 00000000 0000017c 00404100 ea068000 ea03c0f0 [ 4.861221] c000: c0b06390 ea03c018 c02083d4 c0217c84 00000193 ffffffff [ 4.867844] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 4.873942] ---[ end trace d4e346f53863bf64 ]--- [ 4.878564] Alignment trap: not handling instruction e1923f9f at [<c07d22ac>] [ 4.885696] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 4.890072] Unable to handle kernel paging request at virtual address fffffffe [ 4.890085] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.890093] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.890101] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.890109] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.890116] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.890123] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.890131] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.890138] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.890146] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.890153] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.890161] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.890168] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.890176] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.890183] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.890190] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.890197] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.890205] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.890212] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.890220] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.890227] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.890235] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.890242] Unable to handle kernel paging request at virtual address 00003aa0 [ 4.890249] Unable to handle kernel paging request at virtual address 00003aa0 ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.398218] mmc1: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.406774] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.408831] mmc1: queuing unknown CIS tuple 0x80 (4 bytes) [ 1.420374] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.431300] devtmpfs: mounted [ 1.434752] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 1.440796] mmc1: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.447873] mmc1: new SDIO card at address 0001 [ 1.501588] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 1.508412] Alignment trap: not handling instruction e1923f9f at [<c07d22ac>] [ 1.515553] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 1.516001] mmc2: host does not support reading read-only switch. assuming write-enable. [ 1.521904] mmc2: new high speed SDHC card at address 0001 [ 1.535656] Internal error: : 1 [#2] SMP ARM [ 1.539929] Modules linked in: [ 1.543008] CPU: 0 PID: 29042 Comm: %s [ 1.543008] Not tainted 3.14.0-12376-g4ba8526 #1 [ 1.551548] task: c09abe44 ti: e9844000 task.ti: 70737573 [ 1.556964] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 1.562024] LR is at __down_read_trylock+0x14/0x54 [ 1.566820] pc : [<c07d22b0>] lr : [<c027cfb4>] psr: 40000193 [ 1.566820] sp : e9845f18 ip : c0b06390 fp : e9846000 [ 1.578300] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.583528] r7 : c09abe44 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 1.590057] r3 : 20000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.596589] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.603814] Control: 10c5387d Table: 39d2404a DAC: 00000015 [ 1.609562] Process %s [ 1.609562] (pid: 29042, stack limit = 0x707377c3) [ 1.616877] Stack: (0xe9845f18 to 0x70739573) [ 1.621252] [<c07d22b0>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 1.630321] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 1.638684] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 1.646350] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.652450] ---[ end trace ffa3f5e9fa8896c7 ]--- [ 1.657073] Alignment trap: not handling instruction e1923f9f at [<c07d22ac>] [ 1.664210] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 60.168658] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout

10 years, 8 months

mainline build: 11 warnings 0 failures (mainline/v3.14-12376-g4ba8526)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 4ba8526 Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.14-12376-g4ba8526/ Runtime: 43m 30s Passed: 124 Failed: 0 Warnings: 11 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 8 months

← Newer
1
...
13
14
15
16
17
18
19
...
32
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports April 2014