Kernel-build-reports April 2014

kernel-build-reports@lists.linaro.org

20 participants
319 discussions

mainline boot: 16 passed 17 failed (mainline/v3.14-12042-g69cd9eb)

by Olof's autobooter

Failed boards: bbb multi_v7_defconfig : FAILED 3:06.01 beaver multi_v7_defconfig : FAILED 2:57.41 capri multi_v7_defconfig : FAILED 2:58.09 cubie multi_v7_defconfig : FAILED 3:01.04 cubie2 sunxi_defconfig : FAILED 1:21.56 cubie2 multi_v7_defconfig : FAILED 3:07.93 cubie2 multi_lpae_defconfig : FAILED 2:53.53 dalmore multi_v7_defconfig : FAILED 3:04.63 dalmore multi_lpae_defconfig : FAILED 3:01.98 hummingboard multi_v7_defconfig : FAILED 1:05.10 omap5uevm multi_v7_defconfig : FAILED 3:49.63 omap5uevm multi_lpae_defconfig : FAILED 3:48.93 panda multi_v7_defconfig : FAILED 3:09.58 seaboard multi_v7_defconfig : FAILED 3:02.28 snowball multi_v7_defconfig : FAILED 1:12.80 trimslice multi_v7_defconfig : FAILED 3:07.10 wandboard multi_v7_defconfig : FAILED 1:05.85 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:17.82 arndale exynos_defconfig : passed 1:07.61 bbb omap2plus_defconfig : passed 1:39.18 beaver tegra_defconfig : passed 0:52.97 capri bcm_defconfig : passed 0:43.75 cubie sunxi_defconfig : passed 1:00.13 dalmore tegra_defconfig : passed 1:25.88 hummingboard imx_v6_v7_defconfig : passed 1:22.93 omap5uevm omap2plus_defconfig : warnings 1:10.90 panda omap2plus_defconfig : passed 1:16.81 sama5 sama5_defconfig : passed 1:52.57 seaboard tegra_defconfig : passed 1:02.70 snow exynos_defconfig : passed 1:32.66 snowball u8500_defconfig : passed 1:55.90 trimslice tegra_defconfig : passed 1:05.17 wandboard imx_v6_v7_defconfig : passed 0:58.48 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board bbb-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.237108] gspca_main: v2.14.0 registered [ 1.243451] sdhci: Secure Digital Host Controller Interface driver [ 1.249995] sdhci: Copyright(c) Pierre Ossman [ 1.255755] 48060000.mmc supply vmmc_aux not found, using dummy regulator [ 1.297401] 481d8000.mmc supply vmmc_aux not found, using dummy regulator [ 1.337426] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.344294] usbcore: registered new interface driver usbhid [ 1.350208] usbhid: USB HID core driver [ 1.359290] TCP: cubic registered [ 1.362797] NET: Registered protocol family 17 [ 1.367874] Key type dns_resolver registered [ 1.373317] ThumbEE CPU extension supported. [ 1.377918] Registering SWP/SWPB emulation handler [ 1.382955] PJ4 iWMMXt coprocessor enabled. [ 1.395326] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.450083] mmc1: BKOPS_EN bit is not set [ 1.456752] mmc1: new high speed MMC card at address 0001 [ 1.463216] mmcblk0: mmc1:0001 MMC02G 1.78 GiB [ 1.468250] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 1.474663] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 1.481682] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.488366] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.495769] libphy: 4a101000.mdio: probed [ 1.500113] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver unknown [ 1.509875] Detected MACID = bc:6a:29:7a:42:a8 [ 1.516133] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.530219] ALSA device list: [ 1.533358] No soundcards found. [ 1.538287] mmcblk0: p1 p2 [ 1.544114] mmcblk0boot1: unknown partition table [ 1.551187] mmcblk0boot0: unknown partition table [ 1.558354] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.568134] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.628137] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.636728] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 1.663529] devtmpfs: mounted [ 1.667718] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 1.742492] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.660282] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.666368] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.674111] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.681195] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.686787] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.693168] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf002e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472 [ 3.703160] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.713511] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.720109] [drm] No driver support for vblank timestamp query. [ 3.726066] host1x drm: No connectors reported connected with modes [ 3.732323] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.750917] Console: switching to colour frame buffer device 128x48 [ 3.762982] host1x drm: fb0: frame buffer device [ 3.767691] host1x drm: registered panic notifier [ 3.772388] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.778597] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.785986] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.797335] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.802733] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.810531] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.833062] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.839431] hub 1-0:1.0: USB hub found [ 3.843208] hub 1-0:1.0: 1 port detected [ 3.847548] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.852943] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.860742] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.883060] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.889353] hub 2-0:1.0: USB hub found [ 3.893134] hub 2-0:1.0: 1 port detected [ 3.900985] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.913687] ALSA device list: [ 3.916656] #0: NVIDIA Tegra Beaver [ 3.922803] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.931719] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.947880] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.956005] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.982148] devtmpfs: mounted [ 3.985561] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.930000] mmcblk0boot0: mmc0:0001 016G4A partition 1 2.00 MiB [ 0.930000] mmcblk0boot1: mmc0:0001 016G4A partition 2 2.00 MiB [ 0.940000] mmcblk0rpmb: mmc0:0001 016G4A partition 3 256 KiB [ 0.940000] Alternate GPT is invalid, using primary GPT. [ 0.950000] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 [ 0.950000] mmcblk0boot1: unknown partition table [ 0.960000] mmcblk0boot0: unknown partition table [ 1.010000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 1.020000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 1.020000] devtmpfs: mounted [ 1.030000] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 1.050000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 1.050000] Alignment trap: not handling instruction e1923f9f at [<c07d1bfc>] [ 1.050000] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 1.050000] Internal error: : 1 [#2] SMP ARM [ 1.050000] Modules linked in: [ 1.050000] CPU: 0 PID: 29042 Comm: %s [ 1.050000] Not tainted 3.14.0-12042-g69cd9eb #1 [ 1.050000] task: c09ab4f4 ti: ea838000 task.ti: 70737573 [ 1.050000] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 1.050000] LR is at __down_read_trylock+0x14/0x54 [ 1.050000] pc : [<c07d1c00>] lr : [<c027cfb4>] psr: 40000193 [ 1.050000] sp : ea839f38 ip : c0b06390 fp : ea83a020 [ 1.050000] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.050000] r7 : c09ab4f4 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 1.050000] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.050000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.050000] Control: 10c5387d Table: babf404a DAC: 00000015 [ 1.050000] Process %s [ 1.050000] (pid: 29042, stack limit = 0x707377c3) [ 1.050000] Stack: (0xea839f38 to 0x70739573) [ 1.050000] [<c07d1c00>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 1.050000] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 1.050000] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 1.050000] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.050000] ---[ end trace 728a7ee926ace006 ]--- [ 1.050000] Alignment trap: not handling instruction e1923f9f at [<c07d1bfc>] [ 1.050000] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.976145] mousedev: PS/2 mouse device common for all mice [ 0.983048] i2c /dev entries driver [ 0.988182] usbcore: registered new interface driver uvcvideo [ 0.993998] USB Video Class driver (1.1.1) [ 0.998090] gspca_main: v2.14.0 registered [ 1.004988] sdhci: Secure Digital Host Controller Interface driver [ 1.011161] sdhci: Copyright(c) Pierre Ossman [ 1.015879] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.021992] usbcore: registered new interface driver usbhid [ 1.027583] usbhid: USB HID core driver [ 1.034019] TCP: cubic registered [ 1.037344] NET: Registered protocol family 17 [ 1.041955] Key type dns_resolver registered [ 1.046380] ThumbEE CPU extension supported. [ 1.050663] Registering SWP/SWPB emulation handler [ 1.055465] PJ4 iWMMXt coprocessor enabled. [ 1.060736] ahci-5v: 5000 mV [ 1.064204] usb1-vbus: 5000 mV [ 1.067711] usb2-vbus: 5000 mV [ 1.071387] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 1.079216] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 1.086865] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.100229] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 1.108107] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 3.432934] sun4i-emac 1c0b000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 3.452917] Sending DHCP requests ., OK [ 3.473357] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.173 [ 3.481120] IP-Config: Complete: [ 3.484377] device=eth0, hwaddr=08:00:08:1e:2f:44, ipaddr=172.16.1.173, mask=255.255.255.0, gw=172.16.1.1 [ 3.494386] host=172.16.1.173, domain=lixom.net, nis-domain=(none) [ 3.500992] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 3.507521] nameserver0=172.16.1.1 [ 3.511647] ALSA device list: [ 3.514630] No soundcards found. [ 3.523018] VFS: Mounted root (nfs filesystem) on device 0:11. [ 3.529294] devtmpfs: mounted [ 3.532830] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 3.557149] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- [ 3.429630] ., OK [ 3.450091] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.109 [ 3.457896] IP-Config: Complete: [ 3.461171] device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.1.109, mask=255.255.255.0, gw=172.16.1.1 [ 3.471169] host=172.16.1.109, domain=lixom.net, nis-domain=(none) [ 3.477773] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 3.484301] nameserver0=172.16.1.1 [ 3.488437] ALSA device list: [ 3.491417] No soundcards found. [ 3.500054] VFS: Mounted root (nfs filesystem) on device 0:11. [ 3.506331] devtmpfs: mounted [ 3.509940] Freeing unused kernel memory: 560K (c0a74000 - c0b00000) [ 3.533662] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 3.540468] Alignment trap: not handling instruction e1923f9f at [<c07d8abc>] [ 3.547594] Unhandled fault: alignment exception (0x221) at 0x20736eae [ 3.554113] Internal error: : 221 [#2] SMP ARM [ 3.558550] Modules linked in: [ 3.561617] CPU: 0 PID: 29042 Comm: %s [ 3.561617] Not tainted 3.14.0-12042-g69cd9eb #1 [ 3.570140] task: c09b1500 ti: ea03e000 task.ti: 70737573 [ 3.575541] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 3.580589] LR is at __down_read_trylock+0x14/0x54 [ 3.585375] pc : [<c07d8ac0>] lr : [<c027dd08>] psr: 40000193 [ 3.585375] sp : ea03ffb8 ip : c0b0c3e8 fp : ea0400a0 [ 3.596835] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 3.602052] r7 : c09b1500 r6 : 00000207 r5 : 20736eae r4 : 20736eaa [ 3.608569] r3 : 20000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 3.615087] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 3.622299] Control: 30c5387d Table: 6a3ec500 DAC: fffffffd [ 3.628037] Process %s [ 3.628037] (pid: 29042, stack limit = 0x707377c3) [ 3.635336] Stack: (0xea03ffb8 to 0x70739573) [ 3.639706] [<c07d8ac0>] (_raw_spin_lock_irqsave) from [<c027dd08>] (__down_read_trylock+0x14/0x54) [ 3.648753] [<c027dd08>] (__down_read_trylock) from [<c0218010>] (do_page_fault+0x78/0x27c) [ 3.657096] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 3.663187] ---[ end trace e5058bf1d38ea84f ]--- [ 3.667800] Alignment trap: not handling instruction e1923f9f at [<c07d8abc>] [ 3.674924] Unhandled fault: alignment exception (0x221) at 0x20736eae ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- [ 8.050115] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.109 [ 8.057942] IP-Config: Complete: [ 8.061219] device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.1.109, mask=255.255.255.0, gw=172.16.1.1 [ 8.071219] host=172.16.1.109, domain=lixom.net, nis-domain=(none) [ 8.077824] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 8.084353] nameserver0=172.16.1.1 [ 8.088490] ALSA device list: [ 8.091469] No soundcards found. [ 8.100645] VFS: Mounted root (nfs filesystem) on device 0:11. [ 8.106894] devtmpfs: mounted [ 8.110516] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 8.133966] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 8.140781] Alignment trap: not handling instruction e1923f9f at [<c07d1bfc>] [ 8.147906] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 8.154425] Internal error: : 1 [#2] SMP ARM [ 8.158688] Modules linked in: [ 8.161756] CPU: 0 PID: 29042 Comm: %s [ 8.161756] Not tainted 3.14.0-12042-g69cd9eb #1 [ 8.170280] task: c09ab4f4 ti: ea03c000 task.ti: 70737573 [ 8.175682] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 8.180731] LR is at __down_read_trylock+0x14/0x54 [ 8.185518] pc : [<c07d1c00>] lr : [<c027cfb4>] psr: 40000193 [ 8.185518] sp : ea03df18 ip : c0b06390 fp : ea03e000 [ 8.196977] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 8.202194] r7 : c09ab4f4 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 8.208703] r3 : 20000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 8.215222] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 8.222433] Control: 10c5387d Table: 6a47006a DAC: 00000015 [ 8.228169] Process %s [ 8.228169] (pid: 29042, stack limit = 0x707377c3) [ 8.235468] Stack: (0xea03df18 to 0x70739573) [ 8.239836] [<c07d1c00>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 8.248880] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 8.257226] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 8.264876] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 8.270965] ---[ end trace 852c517a27921b2f ]--- [ 8.275579] Alignment trap: not handling instruction e1923f9f at [<c07d1bfc>] [ 8.282702] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.017714] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017738] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.017750] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.017770] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.017783] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018733] Switched to clocksource arch_sys_counter [ 0.025766] NET: Registered protocol family 2 [ 0.026232] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026319] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026442] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026524] TCP: reno registered [ 0.026541] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026594] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.026793] NET: Registered protocol family 1 [ 0.027186] RPC: Registered named UNIX socket transport module. [ 0.027200] RPC: Registered udp transport module. [ 0.027205] RPC: Registered tcp transport module. [ 0.027211] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028170] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.028633] bounce pool size: 64 pages [ 0.036440] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.036458] io scheduler noop registered [ 0.036464] io scheduler deadline registered [ 0.036652] io scheduler cfq registered (default) [ 0.038302] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.079559] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.081979] console [ttyS0] disabled [ 0.102183] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.617240] console [ttyS0] enabled [ 0.621963] mousedev: PS/2 mouse device common for all mice [ 0.627788] i2c /dev entries driver [ 0.632615] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.641604] TCP: cubic registered [ 0.644925] NET: Registered protocol family 17 [ 0.649490] Registering SWP/SWPB emulation handler [ 0.655191] ahci-5v: 5000 mV [ 0.658422] usb1-vbus: 5000 mV [ 0.661836] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.746730] input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound.5/sound/card0/input0 [ 2.759695] TCP: cubic registered [ 2.763109] NET: Registered protocol family 17 [ 2.768159] Key type dns_resolver registered [ 2.774236] ThumbEE CPU extension supported. [ 2.778556] Registering SWP/SWPB emulation handler [ 2.783419] PJ4 iWMMXt coprocessor enabled. [ 2.794365] dvdd_ts: 1800 mV [ 2.798644] usb1_vbus: 5000 mV [ 2.801952] usb1_vbus: supplied by vdd-sys-5v0 [ 2.807829] usb2_vbus: 5000 mV [ 2.811150] usb2_vbus: supplied by vdd-sys-5v0 [ 2.817369] vdd_hdmi_5v0: 5000 mV [ 2.820963] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.830824] vdd_cam_1v8_reg: 1800 mV [ 2.848409] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.855171] [drm] No driver support for vblank timestamp query. [ 2.984544] Console: switching to colour frame buffer device 240x75 [ 3.071380] host1x drm: fb0: frame buffer device [ 3.076207] host1x drm: registered panic notifier [ 3.080988] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.088910] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.100575] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.106243] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.117104] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.142371] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.151820] hub 1-0:1.0: USB hub found [ 3.155936] hub 1-0:1.0: 1 port detected [ 3.165028] input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input1 [ 3.176973] palmas-rtc rtc.8: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.219194] ALSA device list: [ 3.222273] #0: NVIDIA Tegra Dalmore [ 3.229934] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.240749] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.282626] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.290915] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.306749] devtmpfs: mounted [ 3.311403] Freeing unused kernel memory: 560K (c0a74000 - c0b00000) ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.745487] input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound.5/sound/card0/input0 [ 2.758413] TCP: cubic registered [ 2.761762] NET: Registered protocol family 17 [ 2.766932] Key type dns_resolver registered [ 2.773024] ThumbEE CPU extension supported. [ 2.777347] Registering SWP/SWPB emulation handler [ 2.782205] PJ4 iWMMXt coprocessor enabled. [ 2.793107] dvdd_ts: 1800 mV [ 2.797383] usb1_vbus: 5000 mV [ 2.800694] usb1_vbus: supplied by vdd-sys-5v0 [ 2.806543] usb2_vbus: 5000 mV [ 2.809864] usb2_vbus: supplied by vdd-sys-5v0 [ 2.815826] vdd_hdmi_5v0: 5000 mV [ 2.819412] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.827851] vdd_cam_1v8_reg: 1800 mV [ 2.845234] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.851877] [drm] No driver support for vblank timestamp query. [ 2.973775] Console: switching to colour frame buffer device 240x75 [ 3.060484] host1x drm: fb0: frame buffer device [ 3.065303] host1x drm: registered panic notifier [ 3.070082] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.077984] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.089569] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.095224] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.106021] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.132323] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.141498] hub 1-0:1.0: USB hub found [ 3.145641] hub 1-0:1.0: 1 port detected [ 3.154664] input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input1 [ 3.166616] palmas-rtc rtc.8: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.209831] ALSA device list: [ 3.212891] #0: NVIDIA Tegra Dalmore [ 3.220663] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.230646] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.271811] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.280228] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.296084] devtmpfs: mounted [ 3.300730] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- C1 U-Boot > tftp 0x10800000 mainline/v3.14-12042-g69cd9eb/multi_v7_defconfig/zImage tftp 0x10800000 mainline/v3.14-12042-g69cd9eb/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.111 Filename 'mainline/v3.14-12042-g69cd9eb/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################### 2 MiB/s done Bytes transferred = 4647904 (46ebe0 hex) C1 U-Boot > setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot > tftp 0x11000000 mainline/v3.14-12042-g69cd9eb/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb tftp 0x11000000 mainline/v3.14-12042-g69cd9eb/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.111 Filename 'mainline/v3.14-12042-g69cd9eb/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'. Load address: 0x11000000 Loading: *## 809.6 KiB/s done Bytes transferred = 25705 (6469 hex) C1 U-Boot > printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk C1 U-Boot > bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x46ebe0 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009468 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 46.731727] smps9: 2100 mV [ 46.735533] smps10_out2: 5000 mV [ 46.739750] smps10_out1: 5000 mV [ 46.743615] ldo1: 1500 <--> 1800 mV [ 46.748192] ldo2: 2800 mV [ 46.752525] ldo3: 1500 mV [ 46.755969] ldo4: 1500 <--> 1800 mV [ 46.761208] ldo5: 1800 mV [ 46.767038] ldo6: 1200 mV [ 46.770729] ldo7: 2000 mV [ 46.775049] ldo8: 3000 mV [ 46.779254] ldo9: 1800 <--> 3000 mV at 900 mV [ 46.785420] ldoln: 1800 mV [ 46.789854] ldousb: 3250 mV [ 46.793357] REGEN1: no parameters [ 46.796910] REGEN2: no parameters [ 46.800607] regen3: no parameters [ 46.804403] SYSEN1: no parameters [ 46.807950] SYSEN2: no parameters [ 47.050670] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.057761] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.063997] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 47.071935] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 47.110737] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.124079] ALSA device list: [ 47.127168] No soundcards found. [ 47.131170] Waiting for root device /dev/mmcblk1p2... [ 47.147245] mmc2: host does not support reading read-only switch. assuming write-enable. [ 47.157453] mmc2: new high speed SDHC card at address 0001 [ 47.163413] mmcblk1: mmc2:0001 00000 14.6 GiB [ 47.168886] mmcblk1: p1 p2 [ 47.240887] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 47.249702] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 47.272792] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 47.281264] VFS: Mounted root (ext4 filesystem) readonly on device 179:50. [ 47.290987] devtmpfs: mounted [ 47.294359] Freeing unused kernel memory: 560K (c0a74000 - c0b00000) [ 47.328367] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.619741] smps9: 2100 mV [ 47.623534] smps10_out2: 5000 mV [ 47.627748] smps10_out1: 5000 mV [ 47.631618] ldo1: 1500 <--> 1800 mV [ 47.636199] ldo2: 2800 mV [ 47.640545] ldo3: 1500 mV [ 47.643990] ldo4: 1500 <--> 1800 mV [ 47.649223] ldo5: 1800 mV [ 47.655056] ldo6: 1200 mV [ 47.658752] ldo7: 2000 mV [ 47.663098] ldo8: 3000 mV [ 47.667283] ldo9: 1800 <--> 3000 mV at 900 mV [ 47.673429] ldoln: 1800 mV [ 47.677858] ldousb: 3250 mV [ 47.681351] REGEN1: no parameters [ 47.684899] REGEN2: no parameters [ 47.688582] regen3: no parameters [ 47.692383] SYSEN1: no parameters [ 47.695934] SYSEN2: no parameters [ 47.939232] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.946314] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.952554] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 47.960476] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 47.999314] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.012810] ALSA device list: [ 48.015910] No soundcards found. [ 48.019949] Waiting for root device /dev/mmcblk1p2... [ 48.055816] mmc2: host does not support reading read-only switch. assuming write-enable. [ 48.066022] mmc2: new high speed SDHC card at address 0001 [ 48.071980] mmcblk1: mmc2:0001 00000 14.6 GiB [ 48.077449] mmcblk1: p1 p2 [ 48.129463] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 48.138316] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 48.160951] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 48.169427] VFS: Mounted root (ext4 filesystem) readonly on device 179:50. [ 48.184012] devtmpfs: mounted [ 48.187376] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 48.220485] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.779235] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.784240] VDAC: 1800 mV [ 1.784240] VANA: 2100 mV [ 1.791534] VCXIO: 1800 mV [ 1.794921] VUSB: 3300 mV [ 1.798461] V1V8: 1800 mV [ 1.802062] V2V1: 2100 mV [ 1.808105] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.879364] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.031341] hub 1-1:1.0: USB hub found [ 2.035400] hub 1-1:1.0: 5 ports detected [ 2.138916] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.201751] gic_timer_retrigger: lost localtimer interrupt [ 2.338470] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.425048] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.475738] smsc95xx v1.0.4 [ 2.549041] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 96:06:88:c4:5e:95 [ 2.729675] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.736236] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 2.744720] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.790069] 480d5000.mmc supply vmmc_aux not found, using dummy regulator [ 2.840911] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.851318] mmc0: new high speed SDHC card at address b368 [ 2.857391] mmcblk0: mmc0:b368 00000 7.51 GiB [ 2.863494] mmcblk0: p1 p2 [ 2.994873] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 3.003417] twl_rtc rtc.15: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.017333] ALSA device list: [ 3.020507] No soundcards found. [ 3.025787] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 3.035339] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 3.050872] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.058013] mmc1: new SDIO card at address 0001 [ 3.063446] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.072692] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 3.088409] devtmpfs: mounted [ 3.088409] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 3.138458] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.524812] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.524815] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.524818] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.524822] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.524825] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.524828] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.524831] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.700825] Alignment trap: not handling instruction e1923f9f at [<c07d1bfc>] [ 2.707945] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 2.714458] Internal error: : 1 [#2] SMP ARM [ 2.718714] Modules linked in: [ 2.721769] CPU: 0 PID: 29042 Comm: %s [ 2.721769] Not tainted 3.14.0-12042-g69cd9eb #1 [ 2.730283] task: c09ab4f4 ti: ea03a000 task.ti: 70737573 [ 2.735682] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 2.740726] LR is at __down_read_trylock+0x14/0x54 [ 2.745506] pc : [<c07d1c00>] lr : [<c027cfb4>] psr: 40000193 [ 2.745506] sp : ea03bee8 ip : c0b06390 fp : ea03bfd0 [ 2.756959] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 2.762170] r7 : c09ab4f4 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 2.768682] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 2.775194] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 2.782399] Control: 10c5387d Table: 2a4c804a DAC: 00000015 [ 2.788131] Process %s [ 2.788131] (pid: 29042, stack limit = 0x707377c3) [ 2.795425] Stack: (0xea03bee8 to 0x70739573) [ 2.799783] [<c07d1c00>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 2.808825] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 2.817165] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 2.824819] [<c02083d4>] (do_DataAbort) from [<c0212258>] (__dabt_svc+0x38/0x60) [ 2.832197] Exception stack(0xea03bfd0 to 0xea03c018) [ 2.837237] bfc0: 0000017c 00000017 ea03c000 00000193 [ 2.845400] bfe0: ea03c018 c0217c58 00000017 00000000 0000017c 00404100 ea068000 ea03c0f0 [ 2.853561] c000: c0b06390 ea03c018 c02083d4 c0217c84 00000193 ffffffff [ 2.860164] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 2.866246] ---[ end trace 3df9de4ecc60a5ba ]--- [ 2.870852] Alignment trap: not handling instruction e1923f9f at [<c07d1bfc>] [ 2.877970] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.157 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-cmVM2v/tmpYLKyTH-uImage tftp 0x00100000 tmp/snowball-cmVM2v/tmpYLKyTH-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.157 Filename 'tmp/snowball-cmVM2v/tmpYLKyTH-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4689217 (478d41 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4689153 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board trimslice-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.621640] sd 0:0:0:0: [sda] 15649196 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 3.630610] sd 0:0:0:0: [sda] Write Protect is off [ 3.636726] sd 0:0:0:0: [sda] No Caching mode page found [ 3.642134] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 3.655154] sda: sda1 [ 3.663110] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.682174] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities [ 3.691234] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities [ 3.729708] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.737487] VFS: Mounted root (ext4 filesystem) on device 8:1. [ 3.758858] devtmpfs: mounted [ 3.763406] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 3.807155] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 3.813919] Unable to handle kernel NULL pointer dereference at virtual address 00000180 [ 3.822008] Unable to handle kernel paging request at virtual address 00021020 [ 3.829225] Unable to handle kernel paging request at virtual address 00021020 [ 3.836442] Unable to handle kernel paging request at virtual address 00021020 [ 3.843658] Unable to handle kernel paging request at virtual address 00021020 [ 3.850873] Unable to handle kernel paging request at virtual address 00021020 [ 3.858089] Unable to handle kernel paging request at virtual address 00021020 [ 3.865305] Unable to handle kernel paging request at virtual address 00021020 [ 3.872519] Unable to handle kernel paging request at virtual address 00021020 [ 3.879735] Unable to handle kernel paging request at virtual address 00021020 [ 3.886950] Unable to handle kernel paging request at virtual address 00021020 [ 3.894166] Unable to handle kernel paging request at virtual address 00021020 [ 3.901382] Unable to handle kernel paging request at virtual address 00021020 [ 3.908598] Unable to handle kernel paging request at virtual address 00021020 [ 3.915813] Unable to handle kernel paging request at virtual address 00021020 [ 3.923028] Unable to handle kernel paging request at virtual address 00021020 [ 3.930245] Unable to handle kernel paging request at virtual address 00021020 [ 3.937460] Unable to handle kernel paging request at virtual address 00021020 [ 3.944677] Unable to handle kernel paging request at virtual address 00021020 [ 3.951892] Unable to handle kernel paging request at virtual address 00021020 [ 3.959107] Unable to handle kernel paging request at virtual address 00021020 [ 3.966323] Unable to handle kernel paging request at virtual address 00021020 [ 3.973539] Unable to handle kernel paging request at virtual address 00021020 [ 3.980754] Unable to handle kernel paging request at virtual address 00021020 [ 3.987969] Unable to handle kernel paging request at virtual address 00021020 ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x10800node: wandboard status: on 000 mainline/v3.14-12042-g69cd9eb/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'mainline/v3.14-12042-g69cd9eb/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################### 6.1 MiB/s done Bytes transferred = 4647904 (46ebe0 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x11000000 mainline/v3.14-12042-g69cd9eb/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 mainline/v3.14-12042-g69cd9eb/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'mainline/v3.14-12042-g69cd9eb/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *## 790 KiB/s done Bytes transferred = 29143 (71d7 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x46ebe0 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a1d6 Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 8 months

mainline build: 11 warnings 0 failures (mainline/v3.14-12042-g69cd9eb)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 69cd9eb futex: avoid race between requeue and wake Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.14-12042-g69cd9eb/ Runtime: 40m 27s Passed: 124 Failed: 0 Warnings: 11 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 8 months

next boot: 46 pass, 0 fail (next-20140409)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20140409 Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm 0 min 53.3 sec: PASS am335x-boneblack 0 min 25.8 sec: PASS omap3-beagle-xm 1 min 3.8 sec: PASS legacy,3530beagle 0 min 34.1 sec: PASS (Warnings: 1) omap4-panda 1 min 10.7 sec: PASS omap3-overo-tobi 0 min 23.3 sec: PASS (Warnings: 1) am335x-bone 0 min 27.4 sec: PASS omap3-overo-storm-tobi 0 min 22.1 sec: PASS omap5-uevm 1 min 8.3 sec: PASS (Warnings: 1) omap4-panda-es 1 min 11.6 sec: PASS legacy,3730storm 0 min 22.9 sec: PASS legacy,3530overo 0 min 21.1 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 38.4 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 12.5 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.3 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.9 sec: PASS imx6dl-wandboard,wand-solo 0 min 19.0 sec: PASS imx6q-wandboard 0 min 16.9 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 25.7 sec: PASS sun4i-a10-cubieboard 0 min 13.0 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 23.4 sec: PASS mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 22.2 sec: PASS armada-370-mirabox 0 min 20.3 sec: PASS exynos_defconfig ---------------- exynos5420-arndale-octa 0 min 32.1 sec: PASS exynos5250-arndale 0 min 29.6 sec: PASS multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 16.0 sec: PASS tegra30-beaver 0 min 25.1 sec: PASS am335x-boneblack 0 min 24.1 sec: PASS omap3-beagle-xm 0 min 49.6 sec: PASS sun7i-a20-cubieboard2 0 min 12.4 sec: PASS armada-370-mirabox 0 min 22.4 sec: PASS omap4-panda 0 min 56.1 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.3 sec: PASS sun4i-a10-cubieboard 0 min 19.3 sec: PASS bcm28155-ap 0 min 27.6 sec: PASS omap3-overo-tobi 0 min 22.2 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.2 sec: PASS am335x-bone 0 min 26.8 sec: PASS omap3-overo-storm-tobi 0 min 24.0 sec: PASS omap5-uevm 1 min 40.7 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.0 sec: PASS omap4-panda-es 0 min 55.1 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.2 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.2 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.5 sec: PASS da850-evm 0 min 15.7 sec: PASS

10 years, 8 months

next build: 11 warnings 0 failures (next/next-20140409)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: 35e2933 Add linux-next specific files for 20140409 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140409/ Runtime: 39m 53s Passed: 124 Failed: 0 Warnings: 11 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 8 months

mainline boot: 43 pass, 1 fail (v3.14-12041-g75ff24f)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-12041-g75ff24f Failed boot tests (console logs at the end) =========================================== bcm28155-ap: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm 0 min 53.7 sec: PASS am335x-boneblack 0 min 25.9 sec: PASS omap3-beagle-xm 1 min 1.0 sec: PASS legacy,3530beagle 0 min 36.2 sec: PASS (Warnings: 1) omap4-panda 1 min 10.0 sec: PASS omap3-overo-tobi 0 min 23.5 sec: PASS (Warnings: 1) am335x-bone 0 min 27.5 sec: PASS omap3-overo-storm-tobi 0 min 21.8 sec: PASS omap5-uevm 1 min 6.2 sec: PASS (Warnings: 1) omap4-panda-es 1 min 11.5 sec: PASS legacy,3730storm 0 min 22.8 sec: PASS legacy,3530overo 0 min 21.4 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 41.0 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 12.1 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.2 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.8 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.9 sec: PASS imx6q-wandboard 0 min 17.2 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 22.8 sec: PASS sun4i-a10-cubieboard 0 min 16.1 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 23.7 sec: PASS mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 22.2 sec: PASS armada-370-mirabox 0 min 20.3 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 28.9 sec: PASS multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 16.4 sec: PASS tegra30-beaver 0 min 24.6 sec: PASS am335x-boneblack 0 min 24.1 sec: PASS omap3-beagle-xm 0 min 48.7 sec: PASS sun7i-a20-cubieboard2 0 min 12.3 sec: PASS armada-370-mirabox 0 min 22.4 sec: PASS omap4-panda 1 min 2.0 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.7 sec: PASS sun4i-a10-cubieboard 0 min 14.5 sec: PASS bcm28155-ap 0 min 23.4 sec: FAIL omap3-overo-tobi 0 min 22.3 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.2 sec: PASS am335x-bone 0 min 31.8 sec: PASS omap3-overo-storm-tobi 0 min 24.4 sec: PASS omap5-uevm 1 min 41.8 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.4 sec: PASS omap4-panda-es 0 min 55.6 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.4 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.4 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.5 sec: PASS Console logs for failures ========================= multi_v7_defconfig ------------------ bcm28155-ap: FAIL: last 80 lines of boot log: --------------------------------------------- [ 0.620000] ehci-orion: EHCI orion driver [ 0.620000] SPEAr-ehci: EHCI SPEAr driver [ 0.620000] tegra-ehci: Tegra EHCI driver [ 0.630000] usbcore: registered new interface driver usb-storage [ 0.630000] mousedev: PS/2 mouse device common for all mice [ 0.640000] i2c /dev entries driver [ 0.640000] bcm-kona-i2c 3e016000.i2c: device registered successfully [ 0.650000] bcm-kona-i2c 3e017000.i2c: device registered successfully [ 0.650000] bcm-kona-i2c 3e018000.i2c: device registered successfully [ 0.660000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.660000] usbcore: registered new interface driver uvcvideo [ 0.670000] USB Video Class driver (1.1.1) [ 0.670000] gspca_main: v2.14.0 registered [ 0.670000] sdhci: Secure Digital Host Controller Interface driver [ 0.680000] sdhci: Copyright(c) Pierre Ossman [ 0.680000] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.710000] mmc0: no vqmmc regulator found [ 0.710000] mmc0: no vmmc regulator found [ 0.770000] mmc0: SDHCI controller on 3f190000.sdio [3f190000.sdio] using ADMA [ 0.770000] sdhci-kona 3f1b0000.sdio: Got CD GPIO #14. [ 0.800000] mmc1: no vqmmc regulator found [ 0.800000] mmc1: no vmmc regulator found [ 0.850000] mmc1: SDHCI controller on 3f1b0000.sdio [3f1b0000.sdio] using ADMA [ 0.850000] usbcore: registered new interface driver usbhid [ 0.860000] usbhid: USB HID core driver [ 0.860000] TCP: cubic registered [ 0.860000] NET: Registered protocol family 17 [ 0.870000] Key type dns_resolver registered [ 0.870000] ThumbEE CPU extension supported. [ 0.870000] Registering SWP/SWPB emulation handler [ 0.880000] PJ4 iWMMXt coprocessor enabled. [ 0.880000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.890000] ALSA device list: [ 0.890000] No soundcards found. [ 0.890000] Waiting for root device /dev/mmcblk0p8... [ 0.910000] mmc0: BKOPS_EN bit is not set [ 0.920000] mmc0: new high speed MMC card at address 0001 [ 0.920000] mmcblk0: mmc0:0001 016G4A 14.8 GiB [ 0.930000] mmcblk0boot0: mmc0:0001 016G4A partition 1 2.00 MiB [ 0.930000] mmcblk0boot1: mmc0:0001 016G4A partition 2 2.00 MiB [ 0.940000] mmcblk0rpmb: mmc0:0001 016G4A partition 3 256 KiB [ 0.940000] Alternate GPT is invalid, using primary GPT. [ 0.950000] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 [ 0.950000] mmcblk0boot1: unknown partition table [ 0.960000] mmcblk0boot0: unknown partition table [ 1.010000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 1.020000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 1.020000] devtmpfs: mounted [ 1.030000] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 1.060000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 1.060000] Alignment trap: not handling instruction e1923f9f at [<c07d1b7c>] [ 1.060000] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 1.060000] Internal error: : 1 [#2] SMP ARM [ 1.060000] Modules linked in: [ 1.060000] CPU: 0 PID: 29042 Comm: %s [ 1.060000] Not tainted 3.14.0-12041-g75ff24f #1 [ 1.060000] task: c09ab4f4 ti: ea838000 task.ti: 70737573 [ 1.060000] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 1.060000] LR is at __down_read_trylock+0x14/0x54 [ 1.060000] pc : [<c07d1b80>] lr : [<c027cfb4>] psr: 40000193 [ 1.060000] sp : ea839f38 ip : ea83a020 fp : ea83a020 [ 1.060000] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.060000] r7 : c09ab4f4 r6 : 00000005 r5 : 20736eae r4 : 20736eaa [ 1.060000] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.060000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.060000] Control: 10c5387d Table: babf404a DAC: 00000015 [ 1.060000] Process %s [ 1.060000] (pid: 29042, stack limit = 0x707377c3) [ 1.060000] Stack: (0xea839f38 to 0x70739573) [ 1.060000] [<c07d1b80>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 1.060000] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 1.060000] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 1.060000] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.060000] ---[ end trace db73f9310cb11a77 ]--- [ 1.060000] Alignment trap: not handling instruction e1923f9f at [<c07d1b7c>] [ 1.060000] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: userspace: failed to find root shell: Unhandled fault # PYBOOT: Time: 23.45 seconds. # PYBOOT: Result: FAIL

10 years, 8 months

mainline boot: 16 passed 17 failed (mainline/v3.14-12041-g75ff24f)

by Olof's autobooter

Failed boards: bbb multi_v7_defconfig : FAILED 3:07.53 beaver multi_v7_defconfig : FAILED 2:57.52 capri multi_v7_defconfig : FAILED 2:57.87 cubie multi_v7_defconfig : FAILED 2:59.36 cubie2 sunxi_defconfig : FAILED 1:21.81 cubie2 multi_v7_defconfig : FAILED 3:10.72 cubie2 multi_lpae_defconfig : FAILED 2:54.55 dalmore multi_v7_defconfig : FAILED 3:03.89 dalmore multi_lpae_defconfig : FAILED 3:01.94 hummingboard multi_v7_defconfig : FAILED 1:05.16 omap5uevm multi_v7_defconfig : FAILED 3:50.23 omap5uevm multi_lpae_defconfig : FAILED 3:50.36 panda multi_v7_defconfig : FAILED 1:35.78 seaboard multi_v7_defconfig : FAILED 3:02.21 snowball multi_v7_defconfig : FAILED 1:11.61 trimslice multi_v7_defconfig : FAILED 3:03.93 wandboard multi_v7_defconfig : FAILED 1:05.45 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:23.04 arndale exynos_defconfig : passed 1:11.83 bbb omap2plus_defconfig : passed 1:39.11 beaver tegra_defconfig : passed 0:57.39 capri bcm_defconfig : passed 0:46.15 cubie sunxi_defconfig : passed 0:52.31 dalmore tegra_defconfig : passed 1:23.53 hummingboard imx_v6_v7_defconfig : passed 1:23.06 omap5uevm omap2plus_defconfig : warnings 1:11.26 panda omap2plus_defconfig : passed 1:18.25 sama5 sama5_defconfig : passed 1:54.62 seaboard tegra_defconfig : passed 1:04.83 snow exynos_defconfig : passed 1:34.10 snowball u8500_defconfig : passed 1:58.21 trimslice tegra_defconfig : passed 1:02.71 wandboard imx_v6_v7_defconfig : passed 0:57.84 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board bbb-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.238904] gspca_main: v2.14.0 registered [ 1.245234] sdhci: Secure Digital Host Controller Interface driver [ 1.251775] sdhci: Copyright(c) Pierre Ossman [ 1.257581] 48060000.mmc supply vmmc_aux not found, using dummy regulator [ 1.297116] 481d8000.mmc supply vmmc_aux not found, using dummy regulator [ 1.337137] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.344004] usbcore: registered new interface driver usbhid [ 1.349916] usbhid: USB HID core driver [ 1.358994] TCP: cubic registered [ 1.362499] NET: Registered protocol family 17 [ 1.367575] Key type dns_resolver registered [ 1.373006] ThumbEE CPU extension supported. [ 1.377604] Registering SWP/SWPB emulation handler [ 1.382643] PJ4 iWMMXt coprocessor enabled. [ 1.395010] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.449800] mmc1: BKOPS_EN bit is not set [ 1.456462] mmc1: new high speed MMC card at address 0001 [ 1.462917] mmcblk0: mmc1:0001 MMC02G 1.78 GiB [ 1.467943] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 1.474372] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 1.481367] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.488059] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.495458] libphy: 4a101000.mdio: probed [ 1.499792] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver unknown [ 1.509549] Detected MACID = bc:6a:29:7a:42:a8 [ 1.515801] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.529895] ALSA device list: [ 1.533035] No soundcards found. [ 1.537968] mmcblk0: p1 p2 [ 1.543809] mmcblk0boot1: unknown partition table [ 1.550893] mmcblk0boot0: unknown partition table [ 1.558071] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.567865] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.627757] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.636356] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 1.663160] devtmpfs: mounted [ 1.667344] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 1.742006] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.660353] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.666439] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.674183] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.681280] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.686871] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.693233] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf002e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472 [ 3.703224] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.713213] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.719814] [drm] No driver support for vblank timestamp query. [ 3.725781] host1x drm: No connectors reported connected with modes [ 3.732037] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.750586] Console: switching to colour frame buffer device 128x48 [ 3.762662] host1x drm: fb0: frame buffer device [ 3.767371] host1x drm: registered panic notifier [ 3.772068] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.778268] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.785657] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.797000] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.802398] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.810204] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.833068] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.839430] hub 1-0:1.0: USB hub found [ 3.843207] hub 1-0:1.0: 1 port detected [ 3.847544] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.852939] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.860747] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.883066] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.889368] hub 2-0:1.0: USB hub found [ 3.893145] hub 2-0:1.0: 1 port detected [ 3.901014] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.913758] ALSA device list: [ 3.916725] #0: NVIDIA Tegra Beaver [ 3.922861] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.932564] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.948902] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.957023] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.983213] devtmpfs: mounted [ 3.986610] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.930000] mmcblk0boot0: mmc0:0001 016G4A partition 1 2.00 MiB [ 0.930000] mmcblk0boot1: mmc0:0001 016G4A partition 2 2.00 MiB [ 0.940000] mmcblk0rpmb: mmc0:0001 016G4A partition 3 256 KiB [ 0.940000] Alternate GPT is invalid, using primary GPT. [ 0.950000] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 [ 0.950000] mmcblk0boot1: unknown partition table [ 0.960000] mmcblk0boot0: unknown partition table [ 1.010000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 1.020000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 1.020000] devtmpfs: mounted [ 1.030000] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 1.050000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 1.050000] Alignment trap: not handling instruction e1923f9f at [<c07d1b7c>] [ 1.050000] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 1.050000] Internal error: : 1 [#2] SMP ARM [ 1.050000] Modules linked in: [ 1.050000] CPU: 0 PID: 29042 Comm: %s [ 1.050000] Not tainted 3.14.0-12041-g75ff24f #1 [ 1.050000] task: c09ab4f4 ti: ea838000 task.ti: 70737573 [ 1.050000] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 1.050000] LR is at __down_read_trylock+0x14/0x54 [ 1.050000] pc : [<c07d1b80>] lr : [<c027cfb4>] psr: 40000193 [ 1.050000] sp : ea839f38 ip : c0b06390 fp : ea83a020 [ 1.050000] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.050000] r7 : c09ab4f4 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 1.050000] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.050000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.050000] Control: 10c5387d Table: babf404a DAC: 00000015 [ 1.050000] Process %s [ 1.050000] (pid: 29042, stack limit = 0x707377c3) [ 1.050000] Stack: (0xea839f38 to 0x70739573) [ 1.050000] [<c07d1b80>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 1.050000] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 1.050000] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 1.050000] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.050000] ---[ end trace 253fb8db3307ab89 ]--- [ 1.050000] Alignment trap: not handling instruction e1923f9f at [<c07d1b7c>] [ 1.050000] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.968881] usbcore: registered new interface driver usb-storage [ 0.976002] mousedev: PS/2 mouse device common for all mice [ 0.982883] i2c /dev entries driver [ 0.988022] usbcore: registered new interface driver uvcvideo [ 0.993833] USB Video Class driver (1.1.1) [ 0.997924] gspca_main: v2.14.0 registered [ 1.004841] sdhci: Secure Digital Host Controller Interface driver [ 1.011014] sdhci: Copyright(c) Pierre Ossman [ 1.015748] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.021860] usbcore: registered new interface driver usbhid [ 1.027448] usbhid: USB HID core driver [ 1.033898] TCP: cubic registered [ 1.037219] NET: Registered protocol family 17 [ 1.041824] Key type dns_resolver registered [ 1.046251] ThumbEE CPU extension supported. [ 1.050534] Registering SWP/SWPB emulation handler [ 1.055334] PJ4 iWMMXt coprocessor enabled. [ 1.060614] ahci-5v: 5000 mV [ 1.064080] usb1-vbus: 5000 mV [ 1.067587] usb2-vbus: 5000 mV [ 1.071256] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 1.079087] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 1.086740] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.100108] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 1.107988] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 3.432790] sun4i-emac 1c0b000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 3.452776] Sending DHCP requests ., OK [ 3.473215] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.173 [ 3.480980] IP-Config: Complete: [ 3.484240] device=eth0, hwaddr=08:00:08:1e:2f:44, ipaddr=172.16.1.173, mask=255.255.255.0, gw=172.16.1.1 [ 3.494246] host=172.16.1.173, domain=lixom.net, nis-domain=(none) [ 3.500851] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 3.507380] nameserver0=172.16.1.1 [ 3.511503] ALSA device list: [ 3.514485] No soundcards found. [ 3.523303] VFS: Mounted root (nfs filesystem) on device 0:11. [ 3.529556] devtmpfs: mounted [ 3.533141] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- [ 3.929565] ., OK [ 3.950023] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.109 [ 3.957833] IP-Config: Complete: [ 3.961098] device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.1.109, mask=255.255.255.0, gw=172.16.1.1 [ 3.971097] host=172.16.1.109, domain=lixom.net, nis-domain=(none) [ 3.977703] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 3.984232] nameserver0=172.16.1.1 [ 3.988365] ALSA device list: [ 3.991348] No soundcards found. [ 4.000397] VFS: Mounted root (nfs filesystem) on device 0:11. [ 4.006646] devtmpfs: mounted [ 4.010283] Freeing unused kernel memory: 560K (c0a74000 - c0b00000) [ 4.033989] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 4.040794] Alignment trap: not handling instruction e1923f9f at [<c07d8a3c>] [ 4.047922] Unhandled fault: alignment exception (0x221) at 0x20736eae [ 4.054440] Internal error: : 221 [#2] SMP ARM [ 4.058876] Modules linked in: [ 4.061944] CPU: 0 PID: 29042 Comm: %s [ 4.061944] Not tainted 3.14.0-12041-g75ff24f #1 [ 4.070467] task: c09b1500 ti: ea03e000 task.ti: 70737573 [ 4.075872] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 4.080920] LR is at __down_read_trylock+0x14/0x54 [ 4.085707] pc : [<c07d8a40>] lr : [<c027dd08>] psr: 40000193 [ 4.085707] sp : ea03ffb8 ip : c0b0c3e8 fp : ea0400a0 [ 4.097166] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 4.102383] r7 : c09b1500 r6 : 00000207 r5 : 20736eae r4 : 20736eaa [ 4.108900] r3 : 20000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 4.115418] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 4.122629] Control: 30c5387d Table: 6a3ec500 DAC: fffffffd [ 4.128366] Process %s [ 4.128366] (pid: 29042, stack limit = 0x707377c3) [ 4.135665] Stack: (0xea03ffb8 to 0x70739573) [ 4.140033] [<c07d8a40>] (_raw_spin_lock_irqsave) from [<c027dd08>] (__down_read_trylock+0x14/0x54) [ 4.149077] [<c027dd08>] (__down_read_trylock) from [<c0218010>] (do_page_fault+0x78/0x27c) [ 4.157424] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 4.163512] ---[ end trace a7f797905b63dd90 ]--- [ 4.168125] Alignment trap: not handling instruction e1923f9f at [<c07d8a3c>] [ 4.175250] Unhandled fault: alignment exception (0x221) at 0x20736eae ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- [ 9.500022] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.109 [ 9.507856] IP-Config: Complete: [ 9.511131] device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.1.109, mask=255.255.255.0, gw=172.16.1.1 [ 9.521134] host=172.16.1.109, domain=lixom.net, nis-domain=(none) [ 9.527739] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 9.534267] nameserver0=172.16.1.1 [ 9.538404] ALSA device list: [ 9.541383] No soundcards found. [ 9.550126] VFS: Mounted root (nfs filesystem) on device 0:11. [ 9.556453] devtmpfs: mounted [ 9.560078] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 9.583737] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 9.590551] Alignment trap: not handling instruction e1923f9f at [<c07d1b7c>] [ 9.597678] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 9.604197] Internal error: : 1 [#2] SMP ARM [ 9.608460] Modules linked in: [ 9.611527] CPU: 0 PID: 29042 Comm: %s [ 9.611527] Not tainted 3.14.0-12041-g75ff24f #1 [ 9.620051] task: c09ab4f4 ti: ea03c000 task.ti: 70737573 [ 9.625452] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 9.630501] LR is at __down_read_trylock+0x14/0x54 [ 9.635288] pc : [<c07d1b80>] lr : [<c027cfb4>] psr: 40000193 [ 9.635288] sp : ea03df18 ip : c0b06390 fp : ea03e000 [ 9.646747] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 9.651964] r7 : c09ab4f4 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 9.658482] r3 : 20000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 9.665000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 9.672211] Control: 10c5387d Table: 6a47806a DAC: 00000015 [ 9.677948] Process %s [ 9.677948] (pid: 29042, stack limit = 0x707377c3) [ 9.685247] Stack: (0xea03df18 to 0x70739573) [ 9.689618] [<c07d1b80>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 9.698661] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 9.707007] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 9.714656] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 9.720744] ---[ end trace 2da0be00bcc77b44 ]--- [ 9.725358] Alignment trap: not handling instruction e1923f9f at [<c07d1b7c>] [ 9.732481] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.017709] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017732] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.017746] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.017768] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.017781] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018724] Switched to clocksource arch_sys_counter [ 0.025693] NET: Registered protocol family 2 [ 0.026157] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026245] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026366] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026450] TCP: reno registered [ 0.026466] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026522] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.026725] NET: Registered protocol family 1 [ 0.027113] RPC: Registered named UNIX socket transport module. [ 0.027126] RPC: Registered udp transport module. [ 0.027132] RPC: Registered tcp transport module. [ 0.027138] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028103] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.028577] bounce pool size: 64 pages [ 0.036351] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.036368] io scheduler noop registered [ 0.036375] io scheduler deadline registered [ 0.036557] io scheduler cfq registered (default) [ 0.038192] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.079181] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.081608] console [ttyS0] disabled [ 0.101807] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.616871] console [ttyS0] enabled [ 0.621584] mousedev: PS/2 mouse device common for all mice [ 0.627407] i2c /dev entries driver [ 0.632244] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.641231] TCP: cubic registered [ 0.644553] NET: Registered protocol family 17 [ 0.649114] Registering SWP/SWPB emulation handler [ 0.654805] ahci-5v: 5000 mV [ 0.658030] usb1-vbus: 5000 mV [ 0.661453] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.746497] input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound.5/sound/card0/input0 [ 2.759481] TCP: cubic registered [ 2.762894] NET: Registered protocol family 17 [ 2.767957] Key type dns_resolver registered [ 2.774032] ThumbEE CPU extension supported. [ 2.778354] Registering SWP/SWPB emulation handler [ 2.783214] PJ4 iWMMXt coprocessor enabled. [ 2.794172] dvdd_ts: 1800 mV [ 2.798761] usb1_vbus: 5000 mV [ 2.802098] usb1_vbus: supplied by vdd-sys-5v0 [ 2.808180] usb2_vbus: 5000 mV [ 2.811511] usb2_vbus: supplied by vdd-sys-5v0 [ 2.817513] vdd_hdmi_5v0: 5000 mV [ 2.821102] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.830748] vdd_cam_1v8_reg: 1800 mV [ 2.850651] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.857391] [drm] No driver support for vblank timestamp query. [ 2.988199] Console: switching to colour frame buffer device 240x75 [ 3.075056] host1x drm: fb0: frame buffer device [ 3.079837] host1x drm: registered panic notifier [ 3.084740] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.092501] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.104290] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.109856] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.120974] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.142402] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.151789] hub 1-0:1.0: USB hub found [ 3.155954] hub 1-0:1.0: 1 port detected [ 3.165025] input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input1 [ 3.176093] palmas-rtc rtc.8: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.218696] ALSA device list: [ 3.221708] #0: NVIDIA Tegra Dalmore [ 3.229462] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.239417] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.279418] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.287771] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.303684] devtmpfs: mounted [ 3.308373] Freeing unused kernel memory: 560K (c0a74000 - c0b00000) ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.745545] input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound.5/sound/card0/input0 [ 2.758532] TCP: cubic registered [ 2.761945] NET: Registered protocol family 17 [ 2.767029] Key type dns_resolver registered [ 2.773133] ThumbEE CPU extension supported. [ 2.777455] Registering SWP/SWPB emulation handler [ 2.782312] PJ4 iWMMXt coprocessor enabled. [ 2.793233] dvdd_ts: 1800 mV [ 2.797534] usb1_vbus: 5000 mV [ 2.800844] usb1_vbus: supplied by vdd-sys-5v0 [ 2.806882] usb2_vbus: 5000 mV [ 2.810208] usb2_vbus: supplied by vdd-sys-5v0 [ 2.816231] vdd_hdmi_5v0: 5000 mV [ 2.819816] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.829244] vdd_cam_1v8_reg: 1800 mV [ 2.849069] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.855809] [drm] No driver support for vblank timestamp query. [ 2.987184] Console: switching to colour frame buffer device 240x75 [ 3.074071] host1x drm: fb0: frame buffer device [ 3.078829] host1x drm: registered panic notifier [ 3.083738] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.091393] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.103231] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.108807] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.119636] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.142065] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.151448] hub 1-0:1.0: USB hub found [ 3.155607] hub 1-0:1.0: 1 port detected [ 3.164674] input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input1 [ 3.175733] palmas-rtc rtc.8: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.218890] ALSA device list: [ 3.221950] #0: NVIDIA Tegra Dalmore [ 3.229608] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.239551] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.279276] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.287619] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.303535] devtmpfs: mounted [ 3.308219] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- C1 U-Boot > tftp 0x10800000 mainline/v3.14-12041-g75ff24f/multi_v7_defconfig/zImage tftp 0x10800000 mainline/v3.14-12041-g75ff24f/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.111 Filename 'mainline/v3.14-12041-g75ff24f/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################### 2 MiB/s done Bytes transferred = 4647720 (46eb28 hex) C1 U-Boot > setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot > tftp 0x11000000 mainline/v3.14-12041-g75ff24f/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb tftp 0x11000000 mainline/v3.14-12041-g75ff24f/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.111 Filename 'mainline/v3.14-12041-g75ff24f/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'. Load address: 0x11000000 Loading: *## 677.7 KiB/s done Bytes transferred = 25705 (6469 hex) C1 U-Boot > printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk C1 U-Boot > bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x46eb28 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009468 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 46.727789] smps9: 2100 mV [ 46.731614] smps10_out2: 5000 mV [ 46.735827] smps10_out1: 5000 mV [ 46.739686] ldo1: 1500 <--> 1800 mV [ 46.744277] ldo2: 2800 mV [ 46.748606] ldo3: 1500 mV [ 46.752059] ldo4: 1500 <--> 1800 mV [ 46.757290] ldo5: 1800 mV [ 46.763119] ldo6: 1200 mV [ 46.766798] ldo7: 2000 mV [ 46.771127] ldo8: 3000 mV [ 46.775320] ldo9: 1800 <--> 3000 mV at 900 mV [ 46.781462] ldoln: 1800 mV [ 46.785892] ldousb: 3250 mV [ 46.789380] REGEN1: no parameters [ 46.792955] REGEN2: no parameters [ 46.796641] regen3: no parameters [ 46.800435] SYSEN1: no parameters [ 46.804001] SYSEN2: no parameters [ 47.041058] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.321067] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.327314] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 47.335233] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 47.381136] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.394483] ALSA device list: [ 47.397571] No soundcards found. [ 47.401585] Waiting for root device /dev/mmcblk1p2... [ 47.417627] mmc2: host does not support reading read-only switch. assuming write-enable. [ 47.427830] mmc2: new high speed SDHC card at address 0001 [ 47.433796] mmcblk1: mmc2:0001 00000 14.6 GiB [ 47.439276] mmcblk1: p1 p2 [ 47.511297] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 47.520147] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 47.542679] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 47.551146] VFS: Mounted root (ext4 filesystem) readonly on device 179:50. [ 47.560867] devtmpfs: mounted [ 47.564238] Freeing unused kernel memory: 560K (c0a74000 - c0b00000) [ 47.598134] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.615933] smps9: 2100 mV [ 47.619769] smps10_out2: 5000 mV [ 47.623982] smps10_out1: 5000 mV [ 47.627846] ldo1: 1500 <--> 1800 mV [ 47.632452] ldo2: 2800 mV [ 47.636763] ldo3: 1500 mV [ 47.640225] ldo4: 1500 <--> 1800 mV [ 47.645464] ldo5: 1800 mV [ 47.651296] ldo6: 1200 mV [ 47.654985] ldo7: 2000 mV [ 47.659329] ldo8: 3000 mV [ 47.663535] ldo9: 1800 <--> 3000 mV at 900 mV [ 47.669683] ldoln: 1800 mV [ 47.674106] ldousb: 3250 mV [ 47.677593] REGEN1: no parameters [ 47.681172] REGEN2: no parameters [ 47.684858] regen3: no parameters [ 47.688644] SYSEN1: no parameters [ 47.692204] SYSEN2: no parameters [ 47.929212] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.209224] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.215455] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 48.223368] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 48.269290] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.282647] ALSA device list: [ 48.285740] No soundcards found. [ 48.289751] Waiting for root device /dev/mmcblk1p2... [ 48.305787] mmc2: host does not support reading read-only switch. assuming write-enable. [ 48.315986] mmc2: new high speed SDHC card at address 0001 [ 48.321939] mmcblk1: mmc2:0001 00000 14.6 GiB [ 48.327414] mmcblk1: p1 p2 [ 48.399428] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 48.408241] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 48.430756] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 48.439225] VFS: Mounted root (ext4 filesystem) readonly on device 179:50. [ 48.448939] devtmpfs: mounted [ 48.452318] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 48.486171] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.657592] usbhid: USB HID core driver [ 1.665496] TCP: cubic registered [ 1.669006] NET: Registered protocol family 17 [ 1.673858] Key type dns_resolver registered [ 1.678802] Power Management for TI OMAP4+ devices. [ 1.683990] Power Management for TI OMAP4. [ 1.688293] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.695434] ThumbEE CPU extension supported. [ 1.700195] Registering SWP/SWPB emulation handler [ 1.705230] PJ4 iWMMXt coprocessor enabled. [ 1.710296] vwl1271: 1800 mV [ 1.714782] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.724700] twl 0-0048: PIH (irq 39) nested IRQs [ 1.730407] twl_rtc rtc.15: Power up reset detected. [ 1.736297] twl_rtc rtc.15: Enabling TWL-RTC [ 1.743286] twl_rtc rtc.15: rtc core: registered rtc.15 as rtc0 [ 1.750244] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.756317] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.762390] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.768585] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.774139] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.779602] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.785064] VDAC: 1800 mV [ 1.785064] VANA: 2100 mV [ 1.791900] VCXIO: 1800 mV [ 1.795288] VUSB: 3300 mV [ 1.798828] V1V8: 1800 mV [ 1.802429] V2V1: 2100 mV [ 1.879119] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.019653] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.027465] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.034942] hub 1-1:1.0: USB hub found [ 2.039184] hub 1-1:1.0: 5 ports detected [ 2.045593] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.053100] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.059448] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 2.068054] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.425781] usb 1-1.1: new high-speed USB device number 3 using ehci-omap ~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.475447] [<c05d5074>] (hub_port_reset) from [<c05d6c18>] (hub_port_init+0x4c4/0xa90) [ 2.475457] [<c05d6c18>] (hub_port_init) from [<c05d7df0>] (hub_port_connect_change+0x14c/0x924) [ 2.475467] [<c05d7df0>] (hub_port_connect_change) from [<c05d8a40>] (hub_events+0x478/0x754) [ 2.475476] [<c05d8a40>] (hub_events) from [<c05d8d4c>] (hub_thread+0x30/0x124) [ 2.475490] [<c05d8d4c>] (hub_thread) from [<c0260420>] (kthread+0xd8/0xf0) [ 2.475501] [<c0260420>] (kthread) from [<c020e678>] (ret_from_fork+0x14/0x3c) [ 2.475505] ---[ end trace cc1d7494f49aa5f4 ]--- [ 2.656614] Alignment trap: not handling instruction e1923f9f at [<c07d1b7c>] [ 2.663733] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 2.670244] Internal error: : 1 [#2] SMP ARM [ 2.674499] Modules linked in: [ 2.677551] CPU: 0 PID: 29042 Comm: %s [ 2.677551] Tainted: G W 3.14.0-12041-g75ff24f #1 [ 2.687105] task: c09ab4f4 ti: ea03a000 task.ti: 70737573 [ 2.692499] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 2.697543] LR is at __down_read_trylock+0x14/0x54 [ 2.702323] pc : [<c07d1b80>] lr : [<c027cfb4>] psr: 40000193 [ 2.702323] sp : ea03bee8 ip : c0b06390 fp : ea03bfd0 [ 2.713775] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 2.718986] r7 : c09ab4f4 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 2.725497] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 2.732009] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 2.739213] Control: 10c5387d Table: 2a4a804a DAC: 00000015 [ 2.744944] Process %s [ 2.744944] (pid: 29042, stack limit = 0x707377c3) [ 2.752236] Stack: (0xea03bee8 to 0x70739573) [ 2.756589] [<c07d1b80>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 2.765626] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 2.773964] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 2.781611] [<c02083d4>] (do_DataAbort) from [<c0212258>] (__dabt_svc+0x38/0x60) [ 2.788989] Exception stack(0xea03bfd0 to 0xea03c018) [ 2.794029] bfc0: 0000017c 00000017 ea03c000 00000193 [ 2.802191] bfe0: ea03c018 c0217c58 00000017 00000000 0000017c 00404100 ea068000 ea03c0f0 [ 2.810351] c000: c0b06390 ea03c018 c02083d4 c0217c84 00000193 ffffffff [ 2.816954] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 2.823034] ---[ end trace cc1d7494f49aa5f5 ]--- [ 2.827641] Alignment trap: not handling instruction e1923f9f at [<c07d1b7c>] [ 2.834760] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.157 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-bD9v8c/tmpn1WUPR-uImage tftp 0x00100000 tmp/snowball-bD9v8c/tmpn1WUPR-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.157 Filename 'tmp/snowball-bD9v8c/tmpn1WUPR-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4689033 (478c89 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4688969 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board trimslice-multi_v7_defconfig failure log: ------------------------------------------------- [ 4.626880] VFS: Mounted root (ext4 filesystem) on device 8:1. [ 4.647164] devtmpfs: mounted [ 4.651212] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 4.698777] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 4.705887] Alignment trap: not handling instruction e1923f9f at [<c07d1b7c>] [ 4.713024] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 4.719551] Internal error: : 1 [#2] SMP ARM [ 4.723818] Modules linked in: [ 4.726894] CPU: 0 PID: 29042 Comm: %s [ 4.726894] Not tainted 3.14.0-12041-g75ff24f #1 [ 4.735435] task: c09ab4f4 ti: ea03a000 task.ti: 70737573 [ 4.740855] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 4.745918] LR is at __down_read_trylock+0x14/0x54 [ 4.750715] pc : [<c07d1b80>] lr : [<c027cfb4>] psr: 40000193 [ 4.750715] sp : ea03bee8 ip : c0b06390 fp : ea03bfd0 [ 4.762184] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 4.767409] r7 : c09ab4f4 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 4.773934] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 4.780462] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 4.787680] Control: 10c5387d Table: 2a4c404a DAC: 00000015 [ 4.793424] Process %s [ 4.793424] (pid: 29042, stack limit = 0x707377c3) [ 4.800732] Stack: (0xea03bee8 to 0x70739573) [ 4.805117] [<c07d1b80>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 4.814190] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 4.822554] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 4.830237] [<c02083d4>] (do_DataAbort) from [<c0212258>] (__dabt_svc+0x38/0x60) [ 4.837628] Exception stack(0xea03bfd0 to 0xea03c018) [ 4.842685] bfc0: 0000017c 00000017 ea03c000 00000193 [ 4.850867] bfe0: ea03c018 c0217c58 00000017 00000000 0000017c 00404100 ea068000 ea03c0f0 [ 4.859044] c000: c0b06390 ea03c018 c02083d4 c0217c84 00000193 ffffffff [ 4.865666] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 4.871762] ---[ end trace a4cfc38184c68b27 ]--- [ 4.876384] Alignment trap: not handling instruction e1923f9f at [<c07d1b7c>] [ 4.883516] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 4.890384] Unable to handle kernel paging request at virtual address 200000f3 [ 4.897607] pgd = c0204000 [ 4.900316] [200000f3] *pgd=00000000 ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x10800000 mainline/v3.14-12041-g75ff24f/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'mainline/v3.14-12041-g75ff24f/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #####################################node: wandboard status: on #################### 6.1 MiB/s done Bytes transferred = 4647720 (46eb28 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x11000000 mainline/v3.14-12041-g75ff24f/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 mainline/v3.14-12041-g75ff24f/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'mainline/v3.14-12041-g75ff24f/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *## 918 KiB/s done Bytes transferred = 29143 (71d7 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x46eb28 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a1d6 Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 8 months

mainline build: 11 warnings 0 failures (mainline/v3.14-12041-g75ff24f)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 75ff24f Merge branch 'for-3.15' of git://linux-nfs.org/~bfields/linux Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.14-12041-g75ff24f/ Runtime: 40m 42s Passed: 124 Failed: 0 Warnings: 11 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 8 months

mainline boot: 44 pass, 0 fail (v3.14-11993-gce7613d)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-11993-gce7613d Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm 0 min 51.2 sec: PASS am335x-boneblack 0 min 25.8 sec: PASS omap3-beagle-xm 1 min 1.1 sec: PASS legacy,3530beagle 0 min 45.9 sec: PASS (Warnings: 1) omap4-panda 1 min 7.5 sec: PASS omap3-overo-tobi 0 min 23.2 sec: PASS (Warnings: 1) am335x-bone 0 min 27.6 sec: PASS omap3-overo-storm-tobi 0 min 24.6 sec: PASS omap5-uevm 1 min 6.2 sec: PASS (Warnings: 1) omap4-panda-es 1 min 9.4 sec: PASS legacy,3730storm 0 min 20.3 sec: PASS legacy,3530overo 0 min 21.9 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 38.1 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 12.4 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.4 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.7 sec: PASS imx6dl-wandboard,wand-solo 0 min 19.1 sec: PASS imx6q-wandboard 0 min 17.3 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 22.5 sec: PASS sun4i-a10-cubieboard 0 min 13.0 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 21.9 sec: PASS mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 22.5 sec: PASS armada-370-mirabox 0 min 20.3 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 29.5 sec: PASS multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 16.9 sec: PASS tegra30-beaver 0 min 17.1 sec: PASS am335x-boneblack 0 min 24.1 sec: PASS omap3-beagle-xm 0 min 48.4 sec: PASS sun7i-a20-cubieboard2 0 min 12.3 sec: PASS armada-370-mirabox 0 min 22.4 sec: PASS omap4-panda 0 min 53.1 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.2 sec: PASS sun4i-a10-cubieboard 0 min 19.1 sec: PASS bcm28155-ap 0 min 22.9 sec: PASS omap3-overo-tobi 0 min 22.1 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 17.9 sec: PASS am335x-bone 0 min 26.6 sec: PASS omap3-overo-storm-tobi 0 min 21.4 sec: PASS omap5-uevm 1 min 37.8 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.5 sec: PASS omap4-panda-es 0 min 52.0 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.0 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.2 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.5 sec: PASS

10 years, 8 months

mainline boot: 31 pass, 13 fail (v3.14-11993-gce7613d)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-11993-gce7613d Failed boot tests (console logs at the end) =========================================== legacy,3530beagle: OFFLINE: omap2plus_defconfig omap4-panda: OFFLINE: omap2plus_defconfig omap4-panda-es: OFFLINE: omap2plus_defconfig tegra30-beaver: OFFLINE: tegra_defconfig imx6dl-wandboard,wand-dual: OFFLINE: imx_v6_v7_defconfig imx6dl-wandboard,wand-solo: OFFLINE: imx_v6_v7_defconfig imx6q-wandboard: OFFLINE: imx_v6_v7_defconfig tegra30-beaver: OFFLINE: multi_v7_defconfig omap4-panda: OFFLINE: multi_v7_defconfig imx6dl-wandboard,wand-solo: OFFLINE: multi_v7_defconfig imx6q-wandboard: OFFLINE: multi_v7_defconfig omap4-panda-es: OFFLINE: multi_v7_defconfig imx6dl-wandboard,wand-dual: OFFLINE: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm 0 min 51.2 sec: PASS am335x-boneblack 0 min 25.8 sec: PASS omap3-beagle-xm 1 min 1.1 sec: PASS legacy,3530beagle 0 min 31.4 sec: OFFLINE omap4-panda 0 min 31.4 sec: OFFLINE omap3-overo-tobi 0 min 23.2 sec: PASS (Warnings: 1) am335x-bone 0 min 27.6 sec: PASS omap3-overo-storm-tobi 0 min 24.6 sec: PASS omap5-uevm 1 min 6.2 sec: PASS (Warnings: 1) omap4-panda-es 0 min 31.4 sec: OFFLINE legacy,3730storm 0 min 20.3 sec: PASS legacy,3530overo 0 min 21.9 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 38.1 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 12.4 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 31.4 sec: OFFLINE imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 31.4 sec: OFFLINE imx6dl-wandboard,wand-solo 0 min 31.4 sec: OFFLINE imx6q-wandboard 0 min 31.4 sec: OFFLINE sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 22.5 sec: PASS sun4i-a10-cubieboard 0 min 13.0 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 21.9 sec: PASS mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 22.5 sec: PASS armada-370-mirabox 0 min 20.3 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 29.5 sec: PASS multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 16.9 sec: PASS tegra30-beaver 0 min 31.4 sec: OFFLINE am335x-boneblack 0 min 24.1 sec: PASS omap3-beagle-xm 0 min 48.4 sec: PASS sun7i-a20-cubieboard2 0 min 12.3 sec: PASS armada-370-mirabox 0 min 22.4 sec: PASS omap4-panda 0 min 31.4 sec: OFFLINE armada-xp-openblocks-ax3-4 0 min 25.2 sec: PASS sun4i-a10-cubieboard 0 min 19.1 sec: PASS bcm28155-ap 0 min 22.9 sec: PASS omap3-overo-tobi 0 min 22.1 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 31.4 sec: OFFLINE am335x-bone 0 min 26.6 sec: PASS omap3-overo-storm-tobi 0 min 21.4 sec: PASS omap5-uevm 1 min 37.8 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 31.4 sec: OFFLINE omap4-panda-es 0 min 31.4 sec: OFFLINE imx6dl-wandboard,wand-dual 0 min 31.4 sec: OFFLINE sama5_defconfig --------------- sama5d35ek 0 min 17.2 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.5 sec: PASS Console logs for failures ========================= omap2plus_defconfig ------------------- legacy,3530beagle: OFFLINE: last 80 lines of boot log: ------------------------------------------------------ Connected to 3530beagle console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(3530beagle console)> hardreset (user:khilman) Reboot 3530beagle Reboot: 3530beagle ; phidget 0 3 : off, sleep, on ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.41 seconds. # PYBOOT: Result: OFFLINE omap4-panda: OFFLINE: last 80 lines of boot log: ------------------------------------------------ Connected to 4430panda console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(4430panda console)> hardreset (user:khilman) Reboot 4430panda Reboot: 4430panda ; phidget 0 1 : off, sleep, on ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.37 seconds. # PYBOOT: Result: OFFLINE omap4-panda-es: OFFLINE: last 80 lines of boot log: --------------------------------------------------- Connected to 4460panda-es console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(4460panda-es console)> hardreset (user:khilman) Reboot 4460panda-es Reboot: 4460panda-es ; phidget 0 0 : off, sleep, on ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: OFFLINE tegra_defconfig --------------- tegra30-beaver: OFFLINE: last 80 lines of boot log: --------------------------------------------------- Connected to beaver console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(beaver console)> hardreset (user:khilman) Reboot beaver Reboot: beaver ; ip9258 1 2 : off, sleep, on ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.37 seconds. # PYBOOT: Result: OFFLINE imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual: OFFLINE: last 80 lines of boot log: --------------------------------------------------------------- Connected to wand-dual console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-dual console)> hardreset (user:khilman) Reboot wand-dual Reboot: wand-dual ; phidget 2 1 : off, sleep, on ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: OFFLINE imx6dl-wandboard,wand-solo: OFFLINE: last 80 lines of boot log: --------------------------------------------------------------- Connected to wand-solo console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-solo console)> hardreset (user:khilman) Reboot wand-solo Reboot: wand-solo ; phidget 2 2 : off, sleep, on ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.44 seconds. # PYBOOT: Result: OFFLINE imx6q-wandboard: OFFLINE: last 80 lines of boot log: ---------------------------------------------------- Connected to wand-quad console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-quad console)> hardreset (user:khilman) Reboot wand-quad Reboot: wand-quad ; phidget 2 3 : off, sleep, on ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.40 seconds. # PYBOOT: Result: OFFLINE multi_v7_defconfig ------------------ tegra30-beaver: OFFLINE: last 80 lines of boot log: --------------------------------------------------- Connected to beaver console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(beaver console)> hardreset (user:khilman) Reboot beaver Reboot: beaver ; ip9258 1 2 : off, sleep, on ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: OFFLINE omap4-panda: OFFLINE: last 80 lines of boot log: ------------------------------------------------ Connected to 4430panda console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(4430panda console)> hardreset (user:khilman) Reboot 4430panda Reboot: 4430panda ; phidget 0 1 : off, sleep, on ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: OFFLINE imx6dl-wandboard,wand-solo: OFFLINE: last 80 lines of boot log: --------------------------------------------------------------- Connected to wand-solo console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-solo console)> hardreset (user:khilman) Reboot wand-solo Reboot: wand-solo ; phidget 2 2 : off, sleep, on ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.37 seconds. # PYBOOT: Result: OFFLINE imx6q-wandboard: OFFLINE: last 80 lines of boot log: ---------------------------------------------------- Connected to wand-quad console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-quad console)> hardreset (user:khilman) Reboot wand-quad Reboot: wand-quad ; phidget 2 3 : off, sleep, on ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: OFFLINE omap4-panda-es: OFFLINE: last 80 lines of boot log: --------------------------------------------------- Connected to 4460panda-es console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(4460panda-es console)> hardreset (user:khilman) Reboot 4460panda-es Reboot: 4460panda-es ; phidget 0 0 : off, sleep, on ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: OFFLINE imx6dl-wandboard,wand-dual: OFFLINE: last 80 lines of boot log: --------------------------------------------------------------- Connected to wand-dual console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-dual console)> hardreset (user:khilman) Reboot wand-dual Reboot: wand-dual ; phidget 2 1 : off, sleep, on ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: OFFLINE

10 years, 8 months

mainline boot: 31 pass, 13 fail (v3.14-11940-ge4f3054)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-11940-ge4f3054 Failed boot tests (console logs at the end) =========================================== legacy,3530beagle: OFFLINE: omap2plus_defconfig omap4-panda: OFFLINE: omap2plus_defconfig omap4-panda-es: OFFLINE: omap2plus_defconfig tegra30-beaver: OFFLINE: tegra_defconfig imx6dl-wandboard,wand-dual: OFFLINE: imx_v6_v7_defconfig imx6dl-wandboard,wand-solo: OFFLINE: imx_v6_v7_defconfig imx6q-wandboard: OFFLINE: imx_v6_v7_defconfig tegra30-beaver: OFFLINE: multi_v7_defconfig omap4-panda: OFFLINE: multi_v7_defconfig imx6dl-wandboard,wand-solo: OFFLINE: multi_v7_defconfig imx6q-wandboard: OFFLINE: multi_v7_defconfig omap4-panda-es: OFFLINE: multi_v7_defconfig imx6dl-wandboard,wand-dual: OFFLINE: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm 0 min 49.5 sec: PASS am335x-boneblack 0 min 25.9 sec: PASS omap3-beagle-xm 1 min 0.9 sec: PASS legacy,3530beagle 0 min 31.4 sec: OFFLINE omap4-panda 0 min 31.4 sec: OFFLINE omap3-overo-tobi 0 min 23.8 sec: PASS (Warnings: 1) am335x-bone 0 min 32.7 sec: PASS omap3-overo-storm-tobi 0 min 25.1 sec: PASS omap5-uevm 1 min 5.0 sec: PASS (Warnings: 1) omap4-panda-es 0 min 31.4 sec: OFFLINE legacy,3730storm 0 min 23.2 sec: PASS legacy,3530overo 0 min 21.2 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 36.9 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 12.6 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 31.4 sec: OFFLINE imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 31.4 sec: OFFLINE imx6dl-wandboard,wand-solo 0 min 31.4 sec: OFFLINE imx6q-wandboard 0 min 31.4 sec: OFFLINE sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 22.6 sec: PASS sun4i-a10-cubieboard 0 min 12.7 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 21.1 sec: PASS mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 22.1 sec: PASS armada-370-mirabox 0 min 20.3 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 29.5 sec: PASS multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 16.9 sec: PASS tegra30-beaver 0 min 31.4 sec: OFFLINE am335x-boneblack 0 min 24.0 sec: PASS omap3-beagle-xm 0 min 49.5 sec: PASS sun7i-a20-cubieboard2 0 min 12.5 sec: PASS armada-370-mirabox 0 min 22.4 sec: PASS omap4-panda 0 min 31.4 sec: OFFLINE armada-xp-openblocks-ax3-4 0 min 25.4 sec: PASS sun4i-a10-cubieboard 0 min 14.5 sec: PASS bcm28155-ap 0 min 23.6 sec: PASS omap3-overo-tobi 0 min 21.9 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 31.4 sec: OFFLINE am335x-bone 0 min 26.6 sec: PASS omap3-overo-storm-tobi 0 min 24.3 sec: PASS omap5-uevm 1 min 38.0 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 31.4 sec: OFFLINE omap4-panda-es 0 min 31.4 sec: OFFLINE imx6dl-wandboard,wand-dual 0 min 31.4 sec: OFFLINE sama5_defconfig --------------- sama5d35ek 0 min 38.1 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.5 sec: PASS Console logs for failures ========================= omap2plus_defconfig ------------------- legacy,3530beagle: OFFLINE: last 80 lines of boot log: ------------------------------------------------------ Connected to 3530beagle console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(3530beagle console)> hardreset (user:khilman) Reboot 3530beagle Reboot: 3530beagle ; phidget 0 3 : off, sleep, on ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: OFFLINE omap4-panda: OFFLINE: last 80 lines of boot log: ------------------------------------------------ Connected to 4430panda console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(4430panda console)> hardreset (user:khilman) Reboot 4430panda Reboot: 4430panda ; phidget 0 1 : off, sleep, on ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.36 seconds. # PYBOOT: Result: OFFLINE omap4-panda-es: OFFLINE: last 80 lines of boot log: --------------------------------------------------- Connected to 4460panda-es console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(4460panda-es console)> hardreset (user:khilman) Reboot 4460panda-es Reboot: 4460panda-es ; phidget 0 0 : off, sleep, on ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.37 seconds. # PYBOOT: Result: OFFLINE tegra_defconfig --------------- tegra30-beaver: OFFLINE: last 80 lines of boot log: --------------------------------------------------- Connected to beaver console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(beaver console)> hardreset (user:khilman) Reboot beaver Reboot: beaver ; ip9258 1 2 : off, sleep, on ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: OFFLINE imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual: OFFLINE: last 80 lines of boot log: --------------------------------------------------------------- Connected to wand-dual console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-dual console)> hardreset (user:khilman) Reboot wand-dual Reboot: wand-dual ; phidget 2 1 : off, sleep, on ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.40 seconds. # PYBOOT: Result: OFFLINE imx6dl-wandboard,wand-solo: OFFLINE: last 80 lines of boot log: --------------------------------------------------------------- Connected to wand-solo console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-solo console)> hardreset (user:khilman) Reboot wand-solo Reboot: wand-solo ; phidget 2 2 : off, sleep, on ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: OFFLINE imx6q-wandboard: OFFLINE: last 80 lines of boot log: ---------------------------------------------------- Connected to wand-quad console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-quad console)> hardreset (user:khilman) Reboot wand-quad Reboot: wand-quad ; phidget 2 3 : off, sleep, on ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: OFFLINE multi_v7_defconfig ------------------ tegra30-beaver: OFFLINE: last 80 lines of boot log: --------------------------------------------------- Connected to beaver console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(beaver console)> hardreset (user:khilman) Reboot beaver Reboot: beaver ; ip9258 1 2 : off, sleep, on ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: OFFLINE omap4-panda: OFFLINE: last 80 lines of boot log: ------------------------------------------------ Connected to 4430panda console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(4430panda console)> hardreset (user:khilman) Reboot 4430panda Reboot: 4430panda ; phidget 0 1 : off, sleep, on ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: OFFLINE imx6dl-wandboard,wand-solo: OFFLINE: last 80 lines of boot log: --------------------------------------------------------------- Connected to wand-solo console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-solo console)> hardreset (user:khilman) Reboot wand-solo Reboot: wand-solo ; phidget 2 2 : off, sleep, on ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.36 seconds. # PYBOOT: Result: OFFLINE imx6q-wandboard: OFFLINE: last 80 lines of boot log: ---------------------------------------------------- Connected to wand-quad console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-quad console)> hardreset (user:khilman) Reboot wand-quad Reboot: wand-quad ; phidget 2 3 : off, sleep, on ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.36 seconds. # PYBOOT: Result: OFFLINE omap4-panda-es: OFFLINE: last 80 lines of boot log: --------------------------------------------------- Connected to 4460panda-es console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(4460panda-es console)> hardreset (user:khilman) Reboot 4460panda-es Reboot: 4460panda-es ; phidget 0 0 : off, sleep, on ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: OFFLINE imx6dl-wandboard,wand-dual: OFFLINE: last 80 lines of boot log: --------------------------------------------------------------- Connected to wand-dual console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-dual console)> hardreset (user:khilman) Reboot wand-dual Reboot: wand-dual ; phidget 2 1 : off, sleep, on ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: OFFLINE

10 years, 8 months

← Newer
1
...
15
16
17
18
19
20
21
...
32
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports April 2014