Kernel-build-reports April 2014

kernel-build-reports@lists.linaro.org

20 participants
319 discussions

next boot: 46 pass, 0 fail (next-20140410)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20140410 Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm 0 min 57.4 sec: PASS am335x-boneblack 0 min 25.9 sec: PASS omap3-beagle-xm 1 min 0.2 sec: PASS legacy,3530beagle 0 min 55.9 sec: PASS (Warnings: 1) omap4-panda 1 min 11.3 sec: PASS omap3-overo-tobi 0 min 23.1 sec: PASS (Warnings: 1) am335x-bone 0 min 27.3 sec: PASS omap3-overo-storm-tobi 0 min 21.9 sec: PASS omap5-uevm 1 min 2.9 sec: PASS (Warnings: 1) omap4-panda-es 1 min 11.7 sec: PASS legacy,3730storm 0 min 23.0 sec: PASS legacy,3530overo 0 min 21.6 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 40.3 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 12.1 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.2 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.3 sec: PASS imx6dl-wandboard,wand-solo 0 min 19.1 sec: PASS imx6q-wandboard 0 min 17.1 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 22.8 sec: PASS sun4i-a10-cubieboard 0 min 17.8 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 22.6 sec: PASS mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 22.1 sec: PASS armada-370-mirabox 0 min 20.3 sec: PASS exynos_defconfig ---------------- exynos5420-arndale-octa 0 min 34.6 sec: PASS exynos5250-arndale 0 min 29.4 sec: PASS multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 15.4 sec: PASS tegra30-beaver 0 min 17.1 sec: PASS am335x-boneblack 0 min 24.0 sec: PASS omap3-beagle-xm 0 min 53.3 sec: PASS sun7i-a20-cubieboard2 0 min 12.4 sec: PASS armada-370-mirabox 0 min 22.4 sec: PASS omap4-panda 1 min 10.6 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.3 sec: PASS sun4i-a10-cubieboard 0 min 18.9 sec: PASS bcm28155-ap 0 min 26.4 sec: PASS omap3-overo-tobi 0 min 22.1 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.0 sec: PASS am335x-bone 0 min 26.8 sec: PASS omap3-overo-storm-tobi 0 min 24.2 sec: PASS omap5-uevm 1 min 37.3 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 16.9 sec: PASS omap4-panda-es 0 min 55.7 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.4 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.3 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.7 sec: PASS da850-evm 0 min 15.5 sec: PASS

10 years, 8 months

next boot: 31 passed 2 failed (next/next-20140410)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:21.27 snowball multi_v7_defconfig : FAILED 1:16.94 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:23.04 arndale exynos_defconfig : passed 1:07.69 bbb omap2plus_defconfig : passed 1:37.44 bbb multi_v7_defconfig : passed 1:22.09 beaver tegra_defconfig : passed 0:53.75 beaver multi_v7_defconfig : passed 0:47.39 capri bcm_defconfig : passed 0:42.43 capri multi_v7_defconfig : passed 0:44.36 cubie sunxi_defconfig : passed 0:53.61 cubie multi_v7_defconfig : passed 0:51.97 cubie2 multi_v7_defconfig : passed 1:02.78 cubie2 multi_lpae_defconfig : passed 0:53.55 dalmore tegra_defconfig : passed 1:22.82 dalmore multi_v7_defconfig : passed 1:15.21 dalmore multi_lpae_defconfig : passed 1:16.73 hummingboard imx_v6_v7_defconfig : passed 1:18.35 hummingboard multi_v7_defconfig : passed 1:05.56 omap5uevm omap2plus_defconfig : warnings 1:06.21 omap5uevm multi_v7_defconfig : warnings 1:43.55 omap5uevm multi_lpae_defconfig : warnings 1:39.44 panda omap2plus_defconfig : warnings 1:20.92 panda multi_v7_defconfig : passed 2:15.87 sama5 sama5_defconfig : passed 1:55.95 seaboard tegra_defconfig : passed 1:01.24 seaboard multi_v7_defconfig : passed 1:13.31 snow exynos_defconfig : passed 1:33.88 snowball u8500_defconfig : passed 1:20.15 trimslice tegra_defconfig : passed 1:03.76 trimslice multi_v7_defconfig : passed 0:59.35 wandboard imx_v6_v7_defconfig : passed 1:02.91 wandboard multi_v7_defconfig : passed 1:02.13 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.017849] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017873] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.017888] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.017908] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.017920] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018874] Switched to clocksource arch_sys_counter [ 0.025978] NET: Registered protocol family 2 [ 0.026443] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026533] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026654] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026738] TCP: reno registered [ 0.026754] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026811] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.027020] NET: Registered protocol family 1 [ 0.027414] RPC: Registered named UNIX socket transport module. [ 0.027431] RPC: Registered udp transport module. [ 0.027437] RPC: Registered tcp transport module. [ 0.027443] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028419] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.028985] bounce pool size: 64 pages [ 0.036759] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.036779] io scheduler noop registered [ 0.036786] io scheduler deadline registered [ 0.036964] io scheduler cfq registered (default) [ 0.038604] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.080273] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.082717] console [ttyS0] disabled [ 0.102920] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.617909] console [ttyS0] enabled [ 0.622624] mousedev: PS/2 mouse device common for all mice [ 0.628442] i2c /dev entries driver [ 0.633334] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.642328] TCP: cubic registered [ 0.645647] NET: Registered protocol family 17 [ 0.650212] Registering SWP/SWPB emulation handler [ 0.655928] ahci-5v: 5000 mV [ 0.659218] usb1-vbus: 5000 mV [ 0.662579] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- node: snowball status: on *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.157 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-Zfa8T4/tmpjDTDyt-uImage tftp 0x01000000 tmp/snowball-Zfa8T4/tmpjDTDyt-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.157 Filename 'tmp/snowball-Zfa8T4/tmpjDTDyt-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4691249 (479531 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4691185 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 8 months

next build: 11 warnings 0 failures (next/next-20140410)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: 53101f8 Add linux-next specific files for 20140410 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140410/ Runtime: 39m 30s Passed: 124 Failed: 0 Warnings: 11 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 8 months

mainline boot: 43 pass, 1 fail (v3.14-12236-g39de65a)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-12236-g39de65a Failed boot tests (console logs at the end) =========================================== bcm28155-ap: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm 0 min 51.8 sec: PASS am335x-boneblack 0 min 25.9 sec: PASS omap3-beagle-xm 0 min 57.9 sec: PASS legacy,3530beagle 0 min 31.0 sec: PASS (Warnings: 1) omap4-panda 1 min 7.2 sec: PASS omap3-overo-tobi 0 min 26.6 sec: PASS (Warnings: 1) am335x-bone 0 min 27.6 sec: PASS omap3-overo-storm-tobi 0 min 25.0 sec: PASS omap5-uevm 1 min 5.6 sec: PASS (Warnings: 1) omap4-panda-es 1 min 6.6 sec: PASS legacy,3730storm 0 min 20.1 sec: PASS legacy,3530overo 0 min 21.5 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 38.5 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 22.3 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.3 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.7 sec: PASS imx6dl-wandboard,wand-solo 0 min 19.0 sec: PASS imx6q-wandboard 0 min 17.2 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 22.8 sec: PASS sun4i-a10-cubieboard 0 min 17.7 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 23.3 sec: PASS mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 22.4 sec: PASS armada-370-mirabox 0 min 20.3 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 29.7 sec: PASS multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 15.7 sec: PASS tegra30-beaver 0 min 17.3 sec: PASS am335x-boneblack 0 min 24.1 sec: PASS omap3-beagle-xm 0 min 47.6 sec: PASS sun7i-a20-cubieboard2 0 min 12.6 sec: PASS armada-370-mirabox 0 min 22.4 sec: PASS omap4-panda 0 min 53.3 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.1 sec: PASS sun4i-a10-cubieboard 0 min 14.5 sec: PASS bcm28155-ap 0 min 22.5 sec: FAIL omap3-overo-tobi 0 min 22.0 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.3 sec: PASS am335x-bone 0 min 26.8 sec: PASS omap3-overo-storm-tobi 0 min 23.9 sec: PASS omap5-uevm 1 min 39.1 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 16.9 sec: PASS omap4-panda-es 0 min 52.4 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.2 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.2 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.5 sec: PASS Console logs for failures ========================= multi_v7_defconfig ------------------ bcm28155-ap: FAIL: last 80 lines of boot log: --------------------------------------------- [ 0.620000] ehci-orion: EHCI orion driver [ 0.620000] SPEAr-ehci: EHCI SPEAr driver [ 0.620000] tegra-ehci: Tegra EHCI driver [ 0.630000] usbcore: registered new interface driver usb-storage [ 0.630000] mousedev: PS/2 mouse device common for all mice [ 0.640000] i2c /dev entries driver [ 0.640000] bcm-kona-i2c 3e016000.i2c: device registered successfully [ 0.650000] bcm-kona-i2c 3e017000.i2c: device registered successfully [ 0.650000] bcm-kona-i2c 3e018000.i2c: device registered successfully [ 0.660000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.660000] usbcore: registered new interface driver uvcvideo [ 0.670000] USB Video Class driver (1.1.1) [ 0.670000] gspca_main: v2.14.0 registered [ 0.670000] sdhci: Secure Digital Host Controller Interface driver [ 0.680000] sdhci: Copyright(c) Pierre Ossman [ 0.680000] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.710000] mmc0: no vqmmc regulator found [ 0.710000] mmc0: no vmmc regulator found [ 0.770000] mmc0: SDHCI controller on 3f190000.sdio [3f190000.sdio] using ADMA [ 0.770000] sdhci-kona 3f1b0000.sdio: Got CD GPIO #14. [ 0.800000] mmc1: no vqmmc regulator found [ 0.800000] mmc1: no vmmc regulator found [ 0.850000] mmc1: SDHCI controller on 3f1b0000.sdio [3f1b0000.sdio] using ADMA [ 0.850000] usbcore: registered new interface driver usbhid [ 0.860000] usbhid: USB HID core driver [ 0.860000] TCP: cubic registered [ 0.860000] NET: Registered protocol family 17 [ 0.870000] Key type dns_resolver registered [ 0.870000] ThumbEE CPU extension supported. [ 0.870000] Registering SWP/SWPB emulation handler [ 0.880000] PJ4 iWMMXt coprocessor enabled. [ 0.880000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.890000] ALSA device list: [ 0.890000] No soundcards found. [ 0.890000] Waiting for root device /dev/mmcblk0p8... [ 0.910000] mmc0: BKOPS_EN bit is not set [ 0.920000] mmc0: new high speed MMC card at address 0001 [ 0.920000] mmcblk0: mmc0:0001 016G4A 14.8 GiB [ 0.930000] mmcblk0boot0: mmc0:0001 016G4A partition 1 2.00 MiB [ 0.930000] mmcblk0boot1: mmc0:0001 016G4A partition 2 2.00 MiB [ 0.940000] mmcblk0rpmb: mmc0:0001 016G4A partition 3 256 KiB [ 0.940000] Alternate GPT is invalid, using primary GPT. [ 0.950000] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 [ 0.950000] mmcblk0boot1: unknown partition table [ 0.960000] mmcblk0boot0: unknown partition table [ 1.010000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 1.020000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 1.020000] devtmpfs: mounted [ 1.030000] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 1.060000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 1.060000] Alignment trap: not handling instruction e1923f9f at [<c07d2054>] [ 1.060000] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 1.060000] Internal error: : 1 [#2] SMP ARM [ 1.060000] Modules linked in: [ 1.060000] CPU: 0 PID: 29042 Comm: %s [ 1.060000] Not tainted 3.14.0-12236-g39de65a #1 [ 1.060000] task: c09ab714 ti: ea838000 task.ti: 70737573 [ 1.060000] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 1.060000] LR is at __down_read_trylock+0x14/0x54 [ 1.060000] pc : [<c07d2058>] lr : [<c027cfb4>] psr: 40000193 [ 1.060000] sp : ea839f38 ip : ea83a020 fp : ea83a020 [ 1.060000] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.060000] r7 : c09ab714 r6 : 00000005 r5 : 20736eae r4 : 20736eaa [ 1.060000] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.060000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.060000] Control: 10c5387d Table: babf404a DAC: 00000015 [ 1.060000] Process %s [ 1.060000] (pid: 29042, stack limit = 0x707377c3) [ 1.060000] Stack: (0xea839f38 to 0x70739573) [ 1.060000] [<c07d2058>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 1.060000] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 1.060000] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 1.060000] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.060000] ---[ end trace 4917642de33186d7 ]--- [ 1.060000] Alignment trap: not handling instruction e1923f9f at [<c07d2054>] [ 1.060000] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: userspace: failed to find root shell: Unhandled fault # PYBOOT: Time: 22.48 seconds. # PYBOOT: Result: FAIL

10 years, 8 months

mainline boot: 43 pass, 1 fail (v3.14-12042-g69cd9eb)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-12042-g69cd9eb Failed boot tests (console logs at the end) =========================================== bcm28155-ap: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm 0 min 57.5 sec: PASS am335x-boneblack 0 min 25.6 sec: PASS omap3-beagle-xm 1 min 3.2 sec: PASS legacy,3530beagle 0 min 43.2 sec: PASS (Warnings: 1) omap4-panda 1 min 10.2 sec: PASS omap3-overo-tobi 0 min 23.3 sec: PASS (Warnings: 1) am335x-bone 0 min 27.7 sec: PASS omap3-overo-storm-tobi 0 min 25.1 sec: PASS omap5-uevm 1 min 1.6 sec: PASS (Warnings: 1) omap4-panda-es 1 min 12.5 sec: PASS legacy,3730storm 0 min 24.0 sec: PASS legacy,3530overo 0 min 21.2 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 33.5 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 12.3 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.4 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.5 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.8 sec: PASS imx6q-wandboard 0 min 17.1 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 22.8 sec: PASS sun4i-a10-cubieboard 0 min 17.7 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 23.5 sec: PASS mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 22.4 sec: PASS armada-370-mirabox 0 min 20.4 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 30.0 sec: PASS multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 16.5 sec: PASS tegra30-beaver 0 min 20.1 sec: PASS am335x-boneblack 0 min 24.1 sec: PASS omap3-beagle-xm 0 min 47.3 sec: PASS sun7i-a20-cubieboard2 0 min 12.2 sec: PASS armada-370-mirabox 0 min 22.4 sec: PASS omap4-panda 0 min 51.8 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.2 sec: PASS sun4i-a10-cubieboard 0 min 19.2 sec: PASS bcm28155-ap 0 min 23.6 sec: FAIL omap3-overo-tobi 0 min 22.2 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.1 sec: PASS am335x-bone 0 min 26.8 sec: PASS omap3-overo-storm-tobi 0 min 24.4 sec: PASS omap5-uevm 1 min 43.0 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.1 sec: PASS omap4-panda-es 0 min 55.6 sec: PASS imx6dl-wandboard,wand-dual 0 min 17.9 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.2 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.5 sec: PASS Console logs for failures ========================= multi_v7_defconfig ------------------ bcm28155-ap: FAIL: last 80 lines of boot log: --------------------------------------------- [ 0.620000] ehci-orion: EHCI orion driver [ 0.620000] SPEAr-ehci: EHCI SPEAr driver [ 0.620000] tegra-ehci: Tegra EHCI driver [ 0.630000] usbcore: registered new interface driver usb-storage [ 0.630000] mousedev: PS/2 mouse device common for all mice [ 0.640000] i2c /dev entries driver [ 0.640000] bcm-kona-i2c 3e016000.i2c: device registered successfully [ 0.650000] bcm-kona-i2c 3e017000.i2c: device registered successfully [ 0.650000] bcm-kona-i2c 3e018000.i2c: device registered successfully [ 0.660000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.660000] usbcore: registered new interface driver uvcvideo [ 0.670000] USB Video Class driver (1.1.1) [ 0.670000] gspca_main: v2.14.0 registered [ 0.670000] sdhci: Secure Digital Host Controller Interface driver [ 0.680000] sdhci: Copyright(c) Pierre Ossman [ 0.680000] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.710000] mmc0: no vqmmc regulator found [ 0.710000] mmc0: no vmmc regulator found [ 0.770000] mmc0: SDHCI controller on 3f190000.sdio [3f190000.sdio] using ADMA [ 0.770000] sdhci-kona 3f1b0000.sdio: Got CD GPIO #14. [ 0.800000] mmc1: no vqmmc regulator found [ 0.800000] mmc1: no vmmc regulator found [ 0.850000] mmc1: SDHCI controller on 3f1b0000.sdio [3f1b0000.sdio] using ADMA [ 0.850000] usbcore: registered new interface driver usbhid [ 0.860000] usbhid: USB HID core driver [ 0.860000] TCP: cubic registered [ 0.860000] NET: Registered protocol family 17 [ 0.870000] Key type dns_resolver registered [ 0.870000] ThumbEE CPU extension supported. [ 0.870000] Registering SWP/SWPB emulation handler [ 0.880000] PJ4 iWMMXt coprocessor enabled. [ 0.880000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.890000] ALSA device list: [ 0.890000] No soundcards found. [ 0.890000] Waiting for root device /dev/mmcblk0p8... [ 0.910000] mmc0: BKOPS_EN bit is not set [ 0.920000] mmc0: new high speed MMC card at address 0001 [ 0.920000] mmcblk0: mmc0:0001 016G4A 14.8 GiB [ 0.930000] mmcblk0boot0: mmc0:0001 016G4A partition 1 2.00 MiB [ 0.930000] mmcblk0boot1: mmc0:0001 016G4A partition 2 2.00 MiB [ 0.940000] mmcblk0rpmb: mmc0:0001 016G4A partition 3 256 KiB [ 0.940000] Alternate GPT is invalid, using primary GPT. [ 0.950000] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 [ 0.950000] mmcblk0boot1: unknown partition table [ 0.960000] mmcblk0boot0: unknown partition table [ 1.010000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 1.020000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 1.020000] devtmpfs: mounted [ 1.030000] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 1.060000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 1.060000] Alignment trap: not handling instruction e1923f9f at [<c07d1bfc>] [ 1.060000] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 1.060000] Internal error: : 1 [#2] SMP ARM [ 1.060000] Modules linked in: [ 1.060000] CPU: 0 PID: 29042 Comm: %s [ 1.060000] Not tainted 3.14.0-12042-g69cd9eb #1 [ 1.060000] task: c09ab4f4 ti: ea838000 task.ti: 70737573 [ 1.060000] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 1.060000] LR is at __down_read_trylock+0x14/0x54 [ 1.060000] pc : [<c07d1c00>] lr : [<c027cfb4>] psr: 40000193 [ 1.060000] sp : ea839f38 ip : ea83a020 fp : ea83a020 [ 1.060000] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.060000] r7 : c09ab4f4 r6 : 00000005 r5 : 20736eae r4 : 20736eaa [ 1.060000] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.060000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.060000] Control: 10c5387d Table: babf404a DAC: 00000015 [ 1.060000] Process %s [ 1.060000] (pid: 29042, stack limit = 0x707377c3) [ 1.060000] Stack: (0xea839f38 to 0x70739573) [ 1.060000] [<c07d1c00>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 1.060000] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 1.060000] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 1.060000] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.060000] ---[ end trace 3fa06a5f76b8654e ]--- [ 1.060000] Alignment trap: not handling instruction e1923f9f at [<c07d1bfc>] [ 1.060000] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: userspace: failed to find root shell: Unhandled fault # PYBOOT: Time: 23.59 seconds. # PYBOOT: Result: FAIL

10 years, 8 months

mainline boot: 43 pass, 1 fail (v3.14-12041-g75ff24f)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-12041-g75ff24f Failed boot tests (console logs at the end) =========================================== bcm28155-ap: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm 0 min 53.7 sec: PASS am335x-boneblack 0 min 25.9 sec: PASS omap3-beagle-xm 1 min 1.0 sec: PASS legacy,3530beagle 0 min 36.2 sec: PASS (Warnings: 1) omap4-panda 1 min 10.0 sec: PASS omap3-overo-tobi 0 min 23.5 sec: PASS (Warnings: 1) am335x-bone 0 min 27.5 sec: PASS omap3-overo-storm-tobi 0 min 21.8 sec: PASS omap5-uevm 1 min 6.2 sec: PASS (Warnings: 1) omap4-panda-es 1 min 11.5 sec: PASS legacy,3730storm 0 min 22.8 sec: PASS legacy,3530overo 0 min 21.4 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 41.0 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 12.1 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.2 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.8 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.9 sec: PASS imx6q-wandboard 0 min 17.2 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 22.8 sec: PASS sun4i-a10-cubieboard 0 min 16.1 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 23.7 sec: PASS mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 22.2 sec: PASS armada-370-mirabox 0 min 20.3 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 28.9 sec: PASS multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 16.4 sec: PASS tegra30-beaver 0 min 24.6 sec: PASS am335x-boneblack 0 min 24.1 sec: PASS omap3-beagle-xm 0 min 48.7 sec: PASS sun7i-a20-cubieboard2 0 min 12.3 sec: PASS armada-370-mirabox 0 min 22.4 sec: PASS omap4-panda 1 min 2.0 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.7 sec: PASS sun4i-a10-cubieboard 0 min 14.5 sec: PASS bcm28155-ap 0 min 23.4 sec: FAIL omap3-overo-tobi 0 min 22.3 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.2 sec: PASS am335x-bone 0 min 31.8 sec: PASS omap3-overo-storm-tobi 0 min 24.4 sec: PASS omap5-uevm 1 min 41.8 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.4 sec: PASS omap4-panda-es 0 min 55.6 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.4 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.4 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.5 sec: PASS Console logs for failures ========================= multi_v7_defconfig ------------------ bcm28155-ap: FAIL: last 80 lines of boot log: --------------------------------------------- [ 0.620000] ehci-orion: EHCI orion driver [ 0.620000] SPEAr-ehci: EHCI SPEAr driver [ 0.620000] tegra-ehci: Tegra EHCI driver [ 0.630000] usbcore: registered new interface driver usb-storage [ 0.630000] mousedev: PS/2 mouse device common for all mice [ 0.640000] i2c /dev entries driver [ 0.640000] bcm-kona-i2c 3e016000.i2c: device registered successfully [ 0.650000] bcm-kona-i2c 3e017000.i2c: device registered successfully [ 0.650000] bcm-kona-i2c 3e018000.i2c: device registered successfully [ 0.660000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.660000] usbcore: registered new interface driver uvcvideo [ 0.670000] USB Video Class driver (1.1.1) [ 0.670000] gspca_main: v2.14.0 registered [ 0.670000] sdhci: Secure Digital Host Controller Interface driver [ 0.680000] sdhci: Copyright(c) Pierre Ossman [ 0.680000] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.710000] mmc0: no vqmmc regulator found [ 0.710000] mmc0: no vmmc regulator found [ 0.770000] mmc0: SDHCI controller on 3f190000.sdio [3f190000.sdio] using ADMA [ 0.770000] sdhci-kona 3f1b0000.sdio: Got CD GPIO #14. [ 0.800000] mmc1: no vqmmc regulator found [ 0.800000] mmc1: no vmmc regulator found [ 0.850000] mmc1: SDHCI controller on 3f1b0000.sdio [3f1b0000.sdio] using ADMA [ 0.850000] usbcore: registered new interface driver usbhid [ 0.860000] usbhid: USB HID core driver [ 0.860000] TCP: cubic registered [ 0.860000] NET: Registered protocol family 17 [ 0.870000] Key type dns_resolver registered [ 0.870000] ThumbEE CPU extension supported. [ 0.870000] Registering SWP/SWPB emulation handler [ 0.880000] PJ4 iWMMXt coprocessor enabled. [ 0.880000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.890000] ALSA device list: [ 0.890000] No soundcards found. [ 0.890000] Waiting for root device /dev/mmcblk0p8... [ 0.910000] mmc0: BKOPS_EN bit is not set [ 0.920000] mmc0: new high speed MMC card at address 0001 [ 0.920000] mmcblk0: mmc0:0001 016G4A 14.8 GiB [ 0.930000] mmcblk0boot0: mmc0:0001 016G4A partition 1 2.00 MiB [ 0.930000] mmcblk0boot1: mmc0:0001 016G4A partition 2 2.00 MiB [ 0.940000] mmcblk0rpmb: mmc0:0001 016G4A partition 3 256 KiB [ 0.940000] Alternate GPT is invalid, using primary GPT. [ 0.950000] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 [ 0.950000] mmcblk0boot1: unknown partition table [ 0.960000] mmcblk0boot0: unknown partition table [ 1.010000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 1.020000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 1.020000] devtmpfs: mounted [ 1.030000] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 1.060000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 1.060000] Alignment trap: not handling instruction e1923f9f at [<c07d1b7c>] [ 1.060000] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 1.060000] Internal error: : 1 [#2] SMP ARM [ 1.060000] Modules linked in: [ 1.060000] CPU: 0 PID: 29042 Comm: %s [ 1.060000] Not tainted 3.14.0-12041-g75ff24f #1 [ 1.060000] task: c09ab4f4 ti: ea838000 task.ti: 70737573 [ 1.060000] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 1.060000] LR is at __down_read_trylock+0x14/0x54 [ 1.060000] pc : [<c07d1b80>] lr : [<c027cfb4>] psr: 40000193 [ 1.060000] sp : ea839f38 ip : ea83a020 fp : ea83a020 [ 1.060000] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.060000] r7 : c09ab4f4 r6 : 00000005 r5 : 20736eae r4 : 20736eaa [ 1.060000] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.060000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.060000] Control: 10c5387d Table: babf404a DAC: 00000015 [ 1.060000] Process %s [ 1.060000] (pid: 29042, stack limit = 0x707377c3) [ 1.060000] Stack: (0xea839f38 to 0x70739573) [ 1.060000] [<c07d1b80>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 1.060000] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 1.060000] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 1.060000] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.060000] ---[ end trace db73f9310cb11a77 ]--- [ 1.060000] Alignment trap: not handling instruction e1923f9f at [<c07d1b7c>] [ 1.060000] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: userspace: failed to find root shell: Unhandled fault # PYBOOT: Time: 23.45 seconds. # PYBOOT: Result: FAIL

10 years, 8 months

mainline boot: 16 passed 17 failed (mainline/v3.14-12236-g39de65a)

by Olof's autobooter

Failed boards: bbb multi_v7_defconfig : FAILED 3:11.70 beaver multi_v7_defconfig : FAILED 2:57.42 capri multi_v7_defconfig : FAILED 2:57.83 cubie multi_v7_defconfig : FAILED 2:57.08 cubie2 sunxi_defconfig : FAILED 1:19.14 cubie2 multi_v7_defconfig : FAILED 3:02.57 cubie2 multi_lpae_defconfig : FAILED 2:54.06 dalmore multi_v7_defconfig : FAILED 3:04.64 dalmore multi_lpae_defconfig : FAILED 3:01.94 hummingboard multi_v7_defconfig : FAILED 1:05.40 omap5uevm multi_v7_defconfig : FAILED 3:55.31 omap5uevm multi_lpae_defconfig : FAILED 3:49.15 panda multi_v7_defconfig : FAILED 3:08.56 seaboard multi_v7_defconfig : FAILED 3:02.59 snowball multi_v7_defconfig : FAILED 1:12.33 trimslice multi_v7_defconfig : FAILED 3:07.03 wandboard multi_v7_defconfig : FAILED 1:05.42 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:19.84 arndale exynos_defconfig : passed 1:03.18 bbb omap2plus_defconfig : passed 1:33.27 beaver tegra_defconfig : passed 0:50.44 capri bcm_defconfig : passed 0:43.38 cubie sunxi_defconfig : passed 0:52.67 dalmore tegra_defconfig : passed 1:18.08 hummingboard imx_v6_v7_defconfig : passed 1:17.95 omap5uevm omap2plus_defconfig : warnings 1:13.27 panda omap2plus_defconfig : warnings 1:16.44 sama5 sama5_defconfig : passed 1:50.78 seaboard tegra_defconfig : passed 0:57.74 snow exynos_defconfig : passed 1:32.22 snowball u8500_defconfig : passed 1:22.50 trimslice tegra_defconfig : passed 0:58.35 wandboard imx_v6_v7_defconfig : passed 0:55.07 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board bbb-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.226501] usbcore: registered new interface driver uvcvideo [ 1.232632] USB Video Class driver (1.1.1) [ 1.236960] gspca_main: v2.14.0 registered [ 1.243290] sdhci: Secure Digital Host Controller Interface driver [ 1.249834] sdhci: Copyright(c) Pierre Ossman [ 1.327207] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.334068] usbcore: registered new interface driver usbhid [ 1.339983] usbhid: USB HID core driver [ 1.348995] TCP: cubic registered [ 1.352498] NET: Registered protocol family 17 [ 1.357611] Key type dns_resolver registered [ 1.363046] ThumbEE CPU extension supported. [ 1.367641] Registering SWP/SWPB emulation handler [ 1.372678] PJ4 iWMMXt coprocessor enabled. [ 1.384904] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.439784] mmc1: BKOPS_EN bit is not set [ 1.446463] mmc1: new high speed MMC card at address 0001 [ 1.452891] mmcblk0: mmc1:0001 MMC02G 1.78 GiB [ 1.457902] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 1.464314] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 1.471306] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.477972] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.485391] libphy: 4a101000.mdio: probed [ 1.489732] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver unknown [ 1.499496] Detected MACID = bc:6a:29:7a:42:a8 [ 1.505746] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.519819] ALSA device list: [ 1.522959] No soundcards found. [ 1.527895] mmcblk0: p1 p2 [ 1.533720] mmcblk0boot1: unknown partition table [ 1.540802] mmcblk0boot0: unknown partition table [ 1.548003] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.557794] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.617377] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.625952] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 1.652733] devtmpfs: mounted [ 1.656918] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 1.731764] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.660260] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.666345] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.674088] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.681172] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.686763] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.693146] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf002e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472 [ 3.703137] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.713097] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.719699] [drm] No driver support for vblank timestamp query. [ 3.725657] host1x drm: No connectors reported connected with modes [ 3.731913] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.750465] Console: switching to colour frame buffer device 128x48 [ 3.762508] host1x drm: fb0: frame buffer device [ 3.767217] host1x drm: registered panic notifier [ 3.771914] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.778112] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.785494] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.796833] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.802231] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.810031] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.833062] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.839433] hub 1-0:1.0: USB hub found [ 3.843210] hub 1-0:1.0: 1 port detected [ 3.847551] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.852946] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.860751] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.883060] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.889350] hub 2-0:1.0: USB hub found [ 3.893134] hub 2-0:1.0: 1 port detected [ 3.901015] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.913702] ALSA device list: [ 3.916670] #0: NVIDIA Tegra Beaver [ 3.922818] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.932504] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.948387] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.956505] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.982693] devtmpfs: mounted [ 3.986124] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.930000] mmcblk0boot0: mmc0:0001 016G4A partition 1 2.00 MiB [ 0.930000] mmcblk0boot1: mmc0:0001 016G4A partition 2 2.00 MiB [ 0.940000] mmcblk0rpmb: mmc0:0001 016G4A partition 3 256 KiB [ 0.940000] Alternate GPT is invalid, using primary GPT. [ 0.950000] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 [ 0.950000] mmcblk0boot1: unknown partition table [ 0.960000] mmcblk0boot0: unknown partition table [ 1.010000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 1.020000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 1.020000] devtmpfs: mounted [ 1.030000] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 1.050000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 1.050000] Alignment trap: not handling instruction e1923f9f at [<c07d2054>] [ 1.050000] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 1.050000] Internal error: : 1 [#2] SMP ARM [ 1.050000] Modules linked in: [ 1.050000] CPU: 0 PID: 29042 Comm: %s [ 1.050000] Not tainted 3.14.0-12236-g39de65a #1 [ 1.050000] task: c09ab714 ti: ea838000 task.ti: 70737573 [ 1.050000] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 1.050000] LR is at __down_read_trylock+0x14/0x54 [ 1.050000] pc : [<c07d2058>] lr : [<c027cfb4>] psr: 40000193 [ 1.050000] sp : ea839f38 ip : c0b06390 fp : ea83a020 [ 1.050000] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.050000] r7 : c09ab714 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 1.050000] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.050000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.050000] Control: 10c5387d Table: babf404a DAC: 00000015 [ 1.050000] Process %s [ 1.050000] (pid: 29042, stack limit = 0x707377c3) [ 1.050000] Stack: (0xea839f38 to 0x70739573) [ 1.050000] [<c07d2058>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 1.050000] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 1.050000] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 1.050000] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.050000] ---[ end trace 01ccce6300bf521f ]--- [ 1.050000] Alignment trap: not handling instruction e1923f9f at [<c07d2054>] [ 1.050000] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.968913] usbcore: registered new interface driver usb-storage [ 0.976042] mousedev: PS/2 mouse device common for all mice [ 0.982900] i2c /dev entries driver [ 0.988055] usbcore: registered new interface driver uvcvideo [ 0.993869] USB Video Class driver (1.1.1) [ 0.997961] gspca_main: v2.14.0 registered [ 1.004857] sdhci: Secure Digital Host Controller Interface driver [ 1.011030] sdhci: Copyright(c) Pierre Ossman [ 1.015750] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.021871] usbcore: registered new interface driver usbhid [ 1.027464] usbhid: USB HID core driver [ 1.033885] TCP: cubic registered [ 1.037204] NET: Registered protocol family 17 [ 1.041806] Key type dns_resolver registered [ 1.046234] ThumbEE CPU extension supported. [ 1.050519] Registering SWP/SWPB emulation handler [ 1.055324] PJ4 iWMMXt coprocessor enabled. [ 1.060590] ahci-5v: 5000 mV [ 1.064057] usb1-vbus: 5000 mV [ 1.067566] usb2-vbus: 5000 mV [ 1.071248] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 1.079078] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 1.086735] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.100073] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 1.107962] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 3.432853] sun4i-emac 1c0b000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 3.452838] Sending DHCP requests ., OK [ 3.473279] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.173 [ 3.481057] IP-Config: Complete: [ 3.484315] device=eth0, hwaddr=08:00:08:1e:2f:44, ipaddr=172.16.1.173, mask=255.255.255.0, gw=172.16.1.1 [ 3.494320] host=172.16.1.173, domain=lixom.net, nis-domain=(none) [ 3.500926] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 3.507458] nameserver0=172.16.1.1 [ 3.511585] ALSA device list: [ 3.514565] No soundcards found. [ 3.523312] VFS: Mounted root (nfs filesystem) on device 0:11. [ 3.529576] devtmpfs: mounted [ 3.533162] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- [ 3.789616] ., OK [ 3.810078] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.109 [ 3.817890] IP-Config: Complete: [ 3.821162] device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.1.109, mask=255.255.255.0, gw=172.16.1.1 [ 3.831162] host=172.16.1.109, domain=lixom.net, nis-domain=(none) [ 3.837768] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 3.844296] nameserver0=172.16.1.1 [ 3.848429] ALSA device list: [ 3.851411] No soundcards found. [ 3.860228] VFS: Mounted root (nfs filesystem) on device 0:11. [ 3.866485] devtmpfs: mounted [ 3.870105] Freeing unused kernel memory: 560K (c0a75000 - c0b01000) [ 3.893978] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 3.900786] Alignment trap: not handling instruction e1923f9f at [<c07d8ec4>] [ 3.907914] Unhandled fault: alignment exception (0x221) at 0x20736eae [ 3.914432] Internal error: : 221 [#2] SMP ARM [ 3.918869] Modules linked in: [ 3.921937] CPU: 0 PID: 29042 Comm: %s [ 3.921937] Not tainted 3.14.0-12236-g39de65a #1 [ 3.930460] task: c09b2750 ti: ea03e000 task.ti: 70737573 [ 3.935864] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 3.940912] LR is at __down_read_trylock+0x14/0x54 [ 3.945699] pc : [<c07d8ec8>] lr : [<c027dd08>] psr: 40000193 [ 3.945699] sp : ea03ffb8 ip : c0b0e3e8 fp : ea0400a0 [ 3.957159] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 3.962376] r7 : c09b2750 r6 : 00000207 r5 : 20736eae r4 : 20736eaa [ 3.968893] r3 : 20000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 3.975412] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 3.982623] Control: 30c5387d Table: 6a3ed500 DAC: fffffffd [ 3.988360] Process %s [ 3.988360] (pid: 29042, stack limit = 0x707377c3) [ 3.995659] Stack: (0xea03ffb8 to 0x70739573) [ 4.000027] [<c07d8ec8>] (_raw_spin_lock_irqsave) from [<c027dd08>] (__down_read_trylock+0x14/0x54) [ 4.009071] [<c027dd08>] (__down_read_trylock) from [<c0218010>] (do_page_fault+0x78/0x27c) [ 4.017416] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 4.023503] ---[ end trace 689d023ed820a22b ]--- [ 4.028117] Alignment trap: not handling instruction e1923f9f at [<c07d8ec4>] [ 4.035240] Unhandled fault: alignment exception (0x221) at 0x20736eae ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.429955] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.109 [ 3.437786] IP-Config: Complete: [ 3.441061] device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.1.109, mask=255.255.255.0, gw=172.16.1.1 [ 3.451061] host=172.16.1.109, domain=lixom.net, nis-domain=(none) [ 3.457666] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 3.464194] nameserver0=172.16.1.1 [ 3.468332] ALSA device list: [ 3.471312] No soundcards found. [ 3.480232] VFS: Mounted root (nfs filesystem) on device 0:11. [ 3.486509] devtmpfs: mounted [ 3.490124] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 3.513685] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 3.520495] Alignment trap: not handling instruction e1923f9f at [<c07d2054>] [ 3.527622] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 3.534141] Internal error: : 1 [#2] SMP ARM [ 3.538403] Modules linked in: [ 3.541472] CPU: 0 PID: 29042 Comm: %s [ 3.541472] Not tainted 3.14.0-12236-g39de65a #1 [ 3.549995] task: c09ab714 ti: ea03c000 task.ti: 70737573 [ 3.555401] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 3.560450] LR is at __down_read_trylock+0x14/0x54 [ 3.565236] pc : [<c07d2058>] lr : [<c027cfb4>] psr: 40000193 [ 3.565236] sp : ea03df18 ip : c0b06390 fp : ea03e000 [ 3.576696] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 3.581913] r7 : c09ab714 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 3.588430] r3 : 20000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 3.594951] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 3.602162] Control: 10c5387d Table: 6a47006a DAC: 00000015 [ 3.607899] Process %s [ 3.607899] (pid: 29042, stack limit = 0x707377c3) [ 3.615198] Stack: (0xea03df18 to 0x70739573) [ 3.619567] [<c07d2058>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 3.628611] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 3.636958] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 3.644607] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 3.650697] ---[ end trace 8cb9206db3b7b9b8 ]--- [ 3.655311] Alignment trap: not handling instruction e1923f9f at [<c07d2054>] [ 3.662434] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.017742] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017766] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.017780] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.017803] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.017816] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018768] Switched to clocksource arch_sys_counter [ 0.025784] NET: Registered protocol family 2 [ 0.026258] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026344] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026466] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026552] TCP: reno registered [ 0.026567] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026623] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.026830] NET: Registered protocol family 1 [ 0.027219] RPC: Registered named UNIX socket transport module. [ 0.027232] RPC: Registered udp transport module. [ 0.027238] RPC: Registered tcp transport module. [ 0.027244] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028221] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.028692] bounce pool size: 64 pages [ 0.036501] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.036519] io scheduler noop registered [ 0.036526] io scheduler deadline registered [ 0.036707] io scheduler cfq registered (default) [ 0.038352] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.079594] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.082002] console [ttyS0] disabled [ 0.102202] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.617262] console [ttyS0] enabled [ 0.621977] mousedev: PS/2 mouse device common for all mice [ 0.627799] i2c /dev entries driver [ 0.632658] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.641650] TCP: cubic registered [ 0.644968] NET: Registered protocol family 17 [ 0.649528] Registering SWP/SWPB emulation handler [ 0.655237] ahci-5v: 5000 mV [ 0.658471] usb1-vbus: 5000 mV [ 0.661885] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.746281] input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound.5/sound/card0/input0 [ 2.759231] TCP: cubic registered [ 2.762643] NET: Registered protocol family 17 [ 2.767705] Key type dns_resolver registered [ 2.773749] ThumbEE CPU extension supported. [ 2.778073] Registering SWP/SWPB emulation handler [ 2.782936] PJ4 iWMMXt coprocessor enabled. [ 2.793880] dvdd_ts: 1800 mV [ 2.798132] usb1_vbus: 5000 mV [ 2.801441] usb1_vbus: supplied by vdd-sys-5v0 [ 2.807306] usb2_vbus: 5000 mV [ 2.810604] usb2_vbus: supplied by vdd-sys-5v0 [ 2.816389] vdd_hdmi_5v0: 5000 mV [ 2.819946] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.829530] vdd_cam_1v8_reg: 1800 mV [ 2.846197] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.852939] [drm] No driver support for vblank timestamp query. [ 2.973922] Console: switching to colour frame buffer device 240x75 [ 3.060680] host1x drm: fb0: frame buffer device [ 3.065503] host1x drm: registered panic notifier [ 3.070287] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.078293] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.089923] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.095586] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.107356] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.132258] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.141742] hub 1-0:1.0: USB hub found [ 3.145874] hub 1-0:1.0: 1 port detected [ 3.154890] input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input1 [ 3.166814] palmas-rtc rtc.8: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.209873] ALSA device list: [ 3.212933] #0: NVIDIA Tegra Dalmore [ 3.220595] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.230983] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.271682] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.280099] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.295986] devtmpfs: mounted [ 3.300645] Freeing unused kernel memory: 560K (c0a75000 - c0b01000) ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.745692] input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound.5/sound/card0/input0 [ 2.758619] TCP: cubic registered [ 2.761968] NET: Registered protocol family 17 [ 2.767059] Key type dns_resolver registered [ 2.773151] ThumbEE CPU extension supported. [ 2.777474] Registering SWP/SWPB emulation handler [ 2.782331] PJ4 iWMMXt coprocessor enabled. [ 2.793285] dvdd_ts: 1800 mV [ 2.797556] usb1_vbus: 5000 mV [ 2.800868] usb1_vbus: supplied by vdd-sys-5v0 [ 2.806659] usb2_vbus: 5000 mV [ 2.809976] usb2_vbus: supplied by vdd-sys-5v0 [ 2.816003] vdd_hdmi_5v0: 5000 mV [ 2.819585] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.829136] vdd_cam_1v8_reg: 1800 mV [ 2.848854] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.855553] [drm] No driver support for vblank timestamp query. [ 2.986174] Console: switching to colour frame buffer device 240x75 [ 3.073067] host1x drm: fb0: frame buffer device [ 3.077825] host1x drm: registered panic notifier [ 3.082724] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.090410] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.102020] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.107676] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.118513] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.142508] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.152023] hub 1-0:1.0: USB hub found [ 3.156095] hub 1-0:1.0: 1 port detected [ 3.165143] input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input1 [ 3.177066] palmas-rtc rtc.8: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.220003] ALSA device list: [ 3.223086] #0: NVIDIA Tegra Dalmore [ 3.230874] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.241080] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.282266] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.290504] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.307206] devtmpfs: mounted [ 3.311892] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- C1 U-Boot > tftp 0x10800000 mainline/v3.14-12236-g39de65a/multi_v7_defconfig/zImage tftp 0x10800000 mainline/v3.14-12236-g39de65a/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.111 Filename 'mainline/v3.14-12236-g39de65a/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################### 2 MiB/s done Bytes transferred = 4649664 (46f2c0 hex) C1 U-Boot > setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot > tftp 0x11000000 mainline/v3.14-12236-g39de65a/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb tftp 0x11000000 mainline/v3.14-12236-g39de65a/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.111 Filename 'mainline/v3.14-12236-g39de65a/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'. Load address: 0x11000000 Loading: *## 809.6 KiB/s done Bytes transferred = 25705 (6469 hex) C1 U-Boot > printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk C1 U-Boot > bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x46f2c0 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009468 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 46.716570] smps8: 600 <--> 1310 mV at 1040 mV [ 46.722538] smps9: 2100 mV [ 46.726347] smps10_out2: 5000 mV [ 46.730566] smps10_out1: 5000 mV [ 46.734426] ldo1: 1500 <--> 1800 mV [ 46.739011] ldo2: 2800 mV [ 46.743347] ldo3: 1500 mV [ 46.746791] ldo4: 1500 <--> 1800 mV [ 46.752038] ldo5: 1800 mV [ 46.757862] ldo6: 1200 mV [ 46.761563] ldo7: 2000 mV [ 46.765894] ldo8: 3000 mV [ 46.770088] ldo9: 1800 <--> 3000 mV at 900 mV [ 46.776240] ldoln: 1800 mV [ 46.780662] ldousb: 3250 mV [ 46.784165] REGEN1: no parameters [ 46.787714] REGEN2: no parameters [ 46.791416] regen3: no parameters [ 46.795208] SYSEN1: no parameters [ 46.798750] SYSEN2: no parameters [ 47.041353] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.048464] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.055754] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 47.101434] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.114927] ALSA device list: [ 47.118058] No soundcards found. [ 47.122085] Waiting for root device /dev/mmcblk1p2... [ 47.157921] mmc2: host does not support reading read-only switch. assuming write-enable. [ 47.168140] mmc2: new high speed SDHC card at address 0001 [ 47.174107] mmcblk1: mmc2:0001 00000 14.6 GiB [ 47.179573] mmcblk1: p1 p2 [ 47.231580] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 47.240416] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 47.262987] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 47.271463] VFS: Mounted root (ext4 filesystem) readonly on device 179:50. [ 47.286055] devtmpfs: mounted [ 47.289425] Freeing unused kernel memory: 560K (c0a75000 - c0b01000) [ 47.322552] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.604549] smps8: 600 <--> 1310 mV at 1040 mV [ 47.610524] smps9: 2100 mV [ 47.614335] smps10_out2: 5000 mV [ 47.618544] smps10_out1: 5000 mV [ 47.622410] ldo1: 1500 <--> 1800 mV [ 47.627000] ldo2: 2800 mV [ 47.631325] ldo3: 1500 mV [ 47.634786] ldo4: 1500 <--> 1800 mV [ 47.640057] ldo5: 1800 mV [ 47.645874] ldo6: 1200 mV [ 47.649549] ldo7: 2000 mV [ 47.653871] ldo8: 3000 mV [ 47.658066] ldo9: 1800 <--> 3000 mV at 900 mV [ 47.664248] ldoln: 1800 mV [ 47.668653] ldousb: 3250 mV [ 47.672149] REGEN1: no parameters [ 47.675694] REGEN2: no parameters [ 47.679387] regen3: no parameters [ 47.683182] SYSEN1: no parameters [ 47.686740] SYSEN2: no parameters [ 47.929725] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.936804] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.944074] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 47.989812] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.003275] ALSA device list: [ 48.006405] No soundcards found. [ 48.010431] Waiting for root device /dev/mmcblk1p2... [ 48.046295] mmc2: host does not support reading read-only switch. assuming write-enable. [ 48.056506] mmc2: new high speed SDHC card at address 0001 [ 48.062471] mmcblk1: mmc2:0001 00000 14.6 GiB [ 48.067939] mmcblk1: p1 p2 [ 48.119956] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 48.128799] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 48.151368] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 48.159847] VFS: Mounted root (ext4 filesystem) readonly on device 179:50. [ 48.174424] devtmpfs: mounted [ 48.177804] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 48.210923] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.764190] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.770233] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.775756] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.781219] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.786193] VDAC: 1800 mV [ 1.786193] VANA: 2100 mV [ 1.793518] VCXIO: 1800 mV [ 1.793518] VUSB: 3300 mV [ 1.800445] V1V8: 1800 mV [ 1.803985] V2V1: 2100 mV [ 1.888946] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.042541] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.050598] hub 1-1:1.0: USB hub found [ 2.054840] hub 1-1:1.0: 5 ports detected [ 2.060485] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.070007] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.077789] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.085723] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.279388] twl_rtc rtc.15: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.293273] ALSA device list: [ 2.296478] No soundcards found. [ 2.300628] Waiting for root device /dev/mmcblk0p2... [ 2.305206] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.307128] mmc0: new high speed SDHC card at address b368 [ 2.320343] mmcblk0: mmc0:b368 00000 7.51 GiB [ 2.326416] mmcblk0: p1 p2 [ 2.335083] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 2.353240] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 2.359832] mmc1: new SDIO card at address 0001 [ 2.365081] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.430480] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 2.440002] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 2.462432] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.470947] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 2.486511] devtmpfs: mounted [ 2.489685] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 2.494140] smsc95xx v1.0.4 [ 2.543823] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.524633] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.524637] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.524640] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.524643] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.524647] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.524650] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.524653] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.700634] Alignment trap: not handling instruction e1923f9f at [<c07d2054>] [ 2.707755] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 2.714267] Internal error: : 1 [#2] SMP ARM [ 2.718523] Modules linked in: [ 2.721577] CPU: 0 PID: 29042 Comm: %s [ 2.721577] Not tainted 3.14.0-12236-g39de65a #1 [ 2.730092] task: c09ab714 ti: ea03a000 task.ti: 70737573 [ 2.735491] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 2.740535] LR is at __down_read_trylock+0x14/0x54 [ 2.745316] pc : [<c07d2058>] lr : [<c027cfb4>] psr: 40000193 [ 2.745316] sp : ea03bee8 ip : c0b06390 fp : ea03bfd0 [ 2.756769] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 2.761980] r7 : c09ab714 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 2.768491] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 2.775003] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 2.782209] Control: 10c5387d Table: 2a4ac04a DAC: 00000015 [ 2.787940] Process %s [ 2.787940] (pid: 29042, stack limit = 0x707377c3) [ 2.795233] Stack: (0xea03bee8 to 0x70739573) [ 2.799591] [<c07d2058>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 2.808634] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 2.816974] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 2.824628] [<c02083d4>] (do_DataAbort) from [<c0212258>] (__dabt_svc+0x38/0x60) [ 2.832005] Exception stack(0xea03bfd0 to 0xea03c018) [ 2.837046] bfc0: 0000017c 00000017 ea03c000 00000193 [ 2.845209] bfe0: ea03c018 c0217c58 00000017 00000000 0000017c 00404100 ea068000 ea03c0f0 [ 2.853370] c000: c0b06390 ea03c018 c02083d4 c0217c84 00000193 ffffffff [ 2.859974] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 2.866055] ---[ end trace e587eca25db11308 ]--- [ 2.870662] Alignment trap: not handling instruction e1923f9f at [<c07d2054>] [ 2.877780] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- node: snowball status: on *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.157 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-kHvlZp/tmpdEImZM-uImage tftp 0x00100000 tmp/snowball-kHvlZp/tmpdEImZM-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.157 Filename 'tmp/snowball-kHvlZp/tmpdEImZM-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4690977 (479421 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4690913 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board trimslice-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.688139] tegra-ehci c5008000.usb: EHCI Host Controller [ 1.693576] tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 2 [ 1.701429] tegra-ehci c5008000.usb: irq 129, io mem 0xc5008000 [ 1.720132] tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00 [ 1.726894] hub 2-0:1.0: USB hub found [ 1.730712] hub 2-0:1.0: 1 port detected [ 1.738668] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.744105] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.751938] tegra-ehci c5000000.usb: irq 52, io mem 0xc5000000 [ 1.770132] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.776915] hub 3-0:1.0: USB hub found [ 1.780766] hub 3-0:1.0: 1 port detected [ 1.785781] input: gpio-keys.2 as /devices/soc0/gpio-keys.2/input/input0 [ 1.793148] rtc-em3027 2-0056: setting system clock to 2014-04-09 17:44:43 UTC (1397065483) [ 1.805664] ALSA device list: [ 1.808631] #0: tegra-trimslice [ 1.812640] Waiting for root device /dev/sda1... [ 2.050170] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 2.201270] hub 2-1:1.0: USB hub found [ 2.205195] hub 2-1:1.0: 4 ports detected [ 2.380285] usb 3-1: new high-speed USB device number 2 using tegra-ehci [ 2.596799] usb-storage 3-1:1.0: USB Mass Storage device detected [ 2.604201] scsi0 : usb-storage 3-1:1.0 [ 2.690531] usb 2-1.1: new high-speed USB device number 3 using tegra-ehci [ 3.153572] asix 2-1.1:1.0 eth1: register 'asix' at usb-c5008000.usb-1.1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:28:b1 [ 4.493025] scsi 0:0:0:0: Direct-Access SanDisk SSD P4 8GB 0015 PQ: 0 ANSI: 0 [ 4.504490] sd 0:0:0:0: [sda] 15649196 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 4.513371] sd 0:0:0:0: [sda] Write Protect is off [ 4.519496] sd 0:0:0:0: [sda] No Caching mode page found [ 4.524889] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 4.537790] sda: sda1 [ 4.545611] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.561693] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities [ 4.571137] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities [ 4.608943] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 4.616728] VFS: Mounted root (ext4 filesystem) on device 8:1. [ 4.637266] devtmpfs: mounted [ 4.641293] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x10800000 mainline/v3.14-12236-g39de65a/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'mainline/v3.14-12236-g39de65a/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################### 6.1 MiB/s done Bytes transferred = 4649664 (46f2c0 hex) => setenv serverip 172.16.1.3 setenv servenode: wandboard status: on rip 172.16.1.3 => tftp 0x11000000 mainline/v3.14-12236-g39de65a/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 mainline/v3.14-12236-g39de65a/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'mainline/v3.14-12236-g39de65a/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1 MiB/s done Bytes transferred = 29143 (71d7 hex) =>printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x46f2c0 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a1d6 Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 8 months

mainline build: 11 warnings 0 failures (mainline/v3.14-12236-g39de65a)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 39de65a Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.14-12236-g39de65a/ Runtime: 40m 51s Passed: 124 Failed: 0 Warnings: 11 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 8 months

arm-soc boot: 14 passed 19 failed (arm-soc/v3.14-10075-g2bf73dd6)

by Olof's autobooter

Failed boards: bbb multi_v7_defconfig : FAILED 3:16.01 beaver multi_v7_defconfig : FAILED 0:29.17 capri multi_v7_defconfig : FAILED 2:58.06 cubie sunxi_defconfig : FAILED 1:05.94 cubie multi_v7_defconfig : FAILED 1:05.84 cubie2 sunxi_defconfig : FAILED 0:58.72 cubie2 multi_v7_defconfig : FAILED 1:05.76 cubie2 multi_lpae_defconfig : FAILED 1:01.02 dalmore multi_v7_defconfig : FAILED 0:32.98 dalmore multi_lpae_defconfig : FAILED 3:02.13 hummingboard multi_v7_defconfig : FAILED 1:05.06 omap5uevm multi_v7_defconfig : FAILED 3:51.98 omap5uevm multi_lpae_defconfig : FAILED 3:50.27 panda multi_v7_defconfig : FAILED 3:15.10 seaboard multi_v7_defconfig : FAILED 3:01.57 snowball multi_v7_defconfig : FAILED 1:12.66 trimslice multi_v7_defconfig : FAILED 3:07.84 wandboard imx_v6_v7_defconfig : FAILED 2:53.23 wandboard multi_v7_defconfig : FAILED 1:02.60 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:17.60 arndale exynos_defconfig : passed 1:02.01 bbb omap2plus_defconfig : passed 1:29.99 beaver tegra_defconfig : passed 0:51.42 capri bcm_defconfig : passed 0:42.90 dalmore tegra_defconfig : passed 1:19.90 hummingboard imx_v6_v7_defconfig : passed 1:19.26 omap5uevm omap2plus_defconfig : warnings 1:14.11 panda omap2plus_defconfig : passed 1:20.17 sama5 sama5_defconfig : passed 1:52.86 seaboard tegra_defconfig : passed 0:59.51 snow exynos_defconfig : passed 1:31.34 snowball u8500_defconfig : passed 1:33.37 trimslice tegra_defconfig : passed 0:57.87 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board bbb-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.236106] gspca_main: v2.14.0 registered [ 1.242418] sdhci: Secure Digital Host Controller Interface driver [ 1.248950] sdhci: Copyright(c) Pierre Ossman [ 1.254706] 48060000.mmc supply vmmc_aux not found, using dummy regulator [ 1.296105] 481d8000.mmc supply vmmc_aux not found, using dummy regulator [ 1.336136] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.342998] usbcore: registered new interface driver usbhid [ 1.348904] usbhid: USB HID core driver [ 1.357940] TCP: cubic registered [ 1.361444] NET: Registered protocol family 17 [ 1.366533] Key type dns_resolver registered [ 1.371963] ThumbEE CPU extension supported. [ 1.376550] Registering SWP/SWPB emulation handler [ 1.381578] PJ4 iWMMXt coprocessor enabled. [ 1.393916] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.448791] mmc1: BKOPS_EN bit is not set [ 1.455454] mmc1: new high speed MMC card at address 0001 [ 1.461897] mmcblk0: mmc1:0001 MMC02G 1.78 GiB [ 1.466918] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 1.473318] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 1.480323] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.486983] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.494375] libphy: 4a101000.mdio: probed [ 1.498710] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver unknown [ 1.508442] Detected MACID = bc:6a:29:7a:42:a8 [ 1.514708] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.528843] ALSA device list: [ 1.531978] No soundcards found. [ 1.536892] mmcblk0: p1 p2 [ 1.542731] mmcblk0boot1: unknown partition table [ 1.549810] mmcblk0boot0: unknown partition table [ 1.556967] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.566722] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.626076] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.634654] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 1.662211] devtmpfs: mounted [ 1.666343] Freeing unused kernel memory: 544K (c0a65000 - c0aed000) [ 1.746140] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- [ 5.741762] 3f80: ea7aede8 c0aebde0 00000001 e98a2000 00000015 e98a3fa8 c0678a64 c0678a70 [ 5.749917] 3fa0: 60000113 ffffffff [ 5.753411] [<c02122c0>] (__irq_svc) from [<c0678a70>] (cpuidle_enter_state+0x68/0x100) [ 5.761412] [<c0678a70>] (cpuidle_enter_state) from [<c0278bb8>] (cpu_startup_entry+0x1c0/0x230) [ 5.770180] [<c0278bb8>] (cpu_startup_entry) from [<80208a04>] (0x80208a04) [ 5.777124] CPU1: stopping [ 5.779824] CPU: 1 PID: -1062231336 Comm: P éa: Tainted: G D 3.14.0-10075-g2bf73dd6 #1 [ 5.788681] [<c0215bac>] (unwind_backtrace) from [<c0211768>] (show_stack+0x10/0x14) [ 5.796409] [<c0211768>] (show_stack) from [<c07c6d0c>] (dump_stack+0x88/0x98) [ 5.803614] [<c07c6d0c>] (dump_stack) from [<c02143ac>] (handle_IPI+0x148/0x174) [ 5.810992] [<c02143ac>] (handle_IPI) from [<c02088b0>] (gic_handle_irq+0x58/0x5c) [ 5.818544] [<c02088b0>] (gic_handle_irq) from [<c02122c0>] (__irq_svc+0x40/0x50) [ 5.826006] Exception stack(0xe98a1f60 to 0xe98a1fa8) [ 5.831044] 1f60: 00000000 c0b31750 c0b3179c 0000004c ec0f3e70 00000000 524c0cb8 00000001 [ 5.839201] 1f80: ea7a6de8 c0aebde0 00000001 e98a0000 00000015 e98a1fa8 c0678a64 c0678a70 [ 5.847356] 1fa0: 60000113 ffffffff [ 5.850837] [<c02122c0>] (__irq_svc) from [<c0678a70>] (cpuidle_enter_state+0x68/0x100) [ 5.858824] [<c0678a70>] (cpuidle_enter_state) from [<c0278bb8>] (cpu_startup_entry+0x1c0/0x230) [ 5.867589] [<c0278bb8>] (cpu_startup_entry) from [<80208a04>] (0x80208a04) [ 5.874532] CPU3: stopping [ 5.877232] CPU: 3 PID: -1071554224 Comm: h éh éJ@Ù©Ø¢¯ÀTa!À Tainted: G D 3.14.0-10075-g2bf73dd6 #1 [ 5.887301] Workqueue: 0xe8ddffff [ 5.890702] [<c0215bac>] (unwind_backtrace) from [<c0211768>] (show_stack+0x10/0x14) [ 5.898430] [<c0211768>] (show_stack) from [<c07c6d0c>] (dump_stack+0x88/0x98) [ 5.905635] [<c07c6d0c>] (dump_stack) from [<c02143ac>] (handle_IPI+0x148/0x174) [ 5.913013] [<c02143ac>] (handle_IPI) from [<c02088b0>] (gic_handle_irq+0x58/0x5c) [ 5.920564] [<c02088b0>] (gic_handle_irq) from [<c02122c0>] (__irq_svc+0x40/0x50) [ 5.928027] Exception stack(0xe98a5f60 to 0xe98a5fa8) [ 5.933064] 5f60: 00000000 c0b31750 c0b3179c 0000004c e855d438 00000000 524c1488 00000001 [ 5.941221] 5f80: ea7b6de8 c0aebde0 00000001 e98a4000 00000015 e98a5fa8 c0678a64 c0678a70 [ 5.949376] 5fa0: 60000113 ffffffff [ 5.952857] [<c02122c0>] (__irq_svc) from [<c0678a70>] (cpuidle_enter_state+0x68/0x100) [ 5.960844] [<c0678a70>] (cpuidle_enter_state) from [<c0278bb8>] (cpu_startup_entry+0x1c0/0x230) [ 5.969609] [<c0278bb8>] (cpu_startup_entry) from [<80208a04>] (0x80208a04) [ 5.976552] drm_kms_helper: panic occurred, switching back to text console [ 5.983452] Unable to handle kernel NULL pointer dereference at virtual address 000000c8 [ 5.991521] pgd = c0204000 [ 5.994216] [000000c8] *pgd=00000000 ~$off # PYBOOT: Exception: panic ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.920000] mmcblk0: mmc0:0001 016G4A 14.8 GiB [ 0.930000] mmcblk0boot0: mmc0:0001 016G4A partition 1 2.00 MiB [ 0.930000] mmcblk0boot1: mmc0:0001 016G4A partition 2 2.00 MiB [ 0.940000] mmcblk0rpmb: mmc0:0001 016G4A partition 3 256 KiB [ 0.940000] Alternate GPT is invalid, using primary GPT. [ 0.950000] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 [ 0.950000] mmcblk0boot1: unknown partition table [ 0.960000] mmcblk0boot0: unknown partition table [ 1.010000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 1.020000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 1.020000] devtmpfs: mounted [ 1.030000] Freeing unused kernel memory: 544K (c0a65000 - c0aed000) [ 1.050000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 1.050000] Alignment trap: not handling instruction e1923f9f at [<c07cbc7c>] [ 1.050000] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 1.050000] Internal error: : 1 [#2] SMP ARM [ 1.050000] Modules linked in: [ 1.050000] CPU: 0 PID: 1702063392 Comm: e wakeup source: %s [ 1.050000] Not tainted 3.14.0-10075-g2bf73dd6 #1 [ 1.050000] task: c09a3734 ti: ea838000 task.ti: 70737573 [ 1.050000] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 1.050000] LR is at __down_read_trylock+0x14/0x54 [ 1.050000] pc : [<c07cbc80>] lr : [<c027cf3c>] psr: 40000193 [ 1.050000] sp : ea839f38 ip : c0afa380 fp : ea83a020 [ 1.050000] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.050000] r7 : c09a3734 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 1.050000] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.050000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.050000] Control: 10c5387d Table: babf404a DAC: 00000015 [ 1.050000] Process e wakeup source: (pid: 1702063392, stack limit = 0x707377c3) [ 1.050000] Stack: (0xea839f38 to 0x70739573) [ 1.050000] [<c07cbc80>] (_raw_spin_lock_irqsave) from [<c027cf3c>] (__down_read_trylock+0x14/0x54) [ 1.050000] [<c027cf3c>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 1.050000] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 1.050000] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.050000] ---[ end trace e9501dd3fade848b ]--- [ 1.050000] Alignment trap: not handling instruction e1923f9f at [<c07cbc7c>] [ 1.050000] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x41008000 arm-soc/v3.14-10075-g2bf73dd6/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.173 Filename 'arm-soc/v3.14-10075-g2bf73dd6/multi_v7_defconfig/zImage'. Load address: 0x41008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################## 2.8 MiB/s done Bytes transferred = 4627040 (469a60 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x42000000 arm-soc/v3.14-10075-g2bf73dd6/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x42000000 arm-soc/v3.14-10075-g2bf73dd6/multi_v7_defconfig/dtbs/sun4i-a10-cubieboardnode: cubie status: on .dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.173 Filename 'arm-soc/v3.14-10075-g2bf73dd6/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x42000000 Loading: *## 706.1 KiB/s done Bytes transferred = 15184 (3b50 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x41008000 - 0x42000000 bootz 0x41008000 - 0x42000000 Kernel image @ 0x41008000 [ 0x000000 - 0x469a60 ] ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.173 sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41008000 arm-soc/v3.14-10075-g2bf73dd6/sunxi_defconfig/zImage tftp 0x41008000 arm-soc/v3.14-10075-g2bf73dd6/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.173 Filename 'arm-soc/v3.14-10075-g2bf73dd6/sunxi_defconfig/zImage'. Load address: 0x41008000 Loading: *################################################################# ########################################################## 2.7 MiB/s done Bytes transferred = 1804568 (1b8918 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x42000000 arm-soc/v3.14-10075-g2bf73dd6/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x42000000 arm-soc/v3.14-10075-g2bf73dd6/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.173 Filename 'arm-soc/v3.14-10075-g2bf73dd6/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x42000000 Loading: *## 435.5 KiB/s done Bytes transferred = 15184 (3b50 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x41008000 - 0x42000000 bootz 0x41008000 - 0x42000000 Kernel image @ 0x41008000 [ 0x000000 - 0x1b8918 ] ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- tftp 0x41008000 arm-soc/v3.14-10075-g2bf73dd6/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.109 Filename 'arm-soc/v3.14-10075-g2bf73dd6/multi_lpae_defconfig/zImage'. Load address: 0x41008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################node: cubie2 status: on ################################### 3.9 MiB/s done Bytes transferred = 4650392 (46f598 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x42000000 arm-soc/v3.14-10075-g2bf73dd6/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x42000000 arm-soc/v3.14-10075-g2bf73dd6/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.109 Filename 'arm-soc/v3.14-10075-g2bf73dd6/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: *## 255.9 KiB/s done Bytes transferred = 18361 (47b9 hex) sun7i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x41008000 - 0x42000000 bootz 0x41008000 - 0x42000000 Kernel image @ 0x41008000 [ 0x000000 - 0x46f598 ] ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Loading Device Tree to 40ff8000, end 40fff7b8 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x41008000 arm-soc/v3.14-10075-g2bf73dd6/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.109 Filename 'arm-soc/v3.14-10075-g2bf73dd6/multi_v7_defconfig/zImage'. Load address: 0x41008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################## 3.9 MiB/s done Bytes transferred = 4627040 (469a60 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x42000000 arm-soc/v3.14-10075-g2bf73dd6/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x42000000 arm-soc/v3.14-10075-g2bf73dd6/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.109 Filename 'arm-soc/v3.14-10075-g2bf73dd6/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: *## 121.1 KiB/s done Bytes transferred = 18361 (47b9 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x41008000 - 0x42000000 bootz 0x4100node: cubie2 status: on 8000 - 0x42000000 Kernel image @ 0x41008000 [ 0x000000 - 0x469a60 ] ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Loading Device Tree to 40ff8000, end 40fff7b8 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1node: cubie2 status: on .3 sun7i# tftp 0x41008000 arm-soc/v3.14-10075-g2bf73dd6/sunxi_defconfig/zImage tftp 0x41008000 arm-soc/v3.14-10075-g2bf73dd6/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.109 Filename 'arm-soc/v3.14-10075-g2bf73dd6/sunxi_defconfig/zImage'. Load address: 0x41008000 Loading: *################################################################# ########################################################## 4 MiB/s done Bytes transferred = 1804568 (1b8918 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x42000000 arm-soc/v3.14-10075-g2bf73dd6/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x42000000 arm-soc/v3.14-10075-g2bf73dd6/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.109 Filename 'arm-soc/v3.14-10075-g2bf73dd6/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: *## 896.5 KiB/s done Bytes transferred = 18361 (47b9 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x41008000 - 0x42000000 bootz 0x41008000 - 0x42000000 Kernel image @ 0x41008000 [ 0x000000 - 0x1b8918 ] ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Loading Device Tree to 40ff8000, end 40fff7b8 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- [ 3.131372] hub 1-0:1.0: USB hub found [ 3.135434] hub 1-0:1.0: 1 port detected [ 3.144459] input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input1 [ 3.154602] palmas-rtc rtc.8: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.197735] ALSA device list: [ 3.200747] #0: NVIDIA Tegra Dalmore [ 3.208591] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.218566] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.261447] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.269789] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.285722] devtmpfs: mounted [ 3.290352] Freeing unused kernel memory: 548K (c0a6b000 - c0af4000) [ 3.341224] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 3.348860] Alignment trap: not handling instruction e1923f9f at [<c07d2a44>] [ 3.356017] Unhandled fault: alignment exception (0x221) at 0x20736eae [ 3.362566] Internal error: : 221 [#2] SMP ARM [ 3.367024] Modules linked in: [ 3.370137] CPU: 0 PID: 1702063392 Comm: e wakeup source: %s [ 3.370137] Not tainted 3.14.0-10075-g2bf73dd6 #1 [ 3.380628] task: c09a9730 ti: e9850000 task.ti: 70737573 [ 3.386065] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 3.391147] LR is at __down_read_trylock+0x14/0x54 [ 3.395964] pc : [<c07d2a48>] lr : [<c027dc90>] psr: 40000193 [ 3.395964] sp : e9851fa8 ip : c0b003d8 fp : e9852090 [ 3.407455] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 3.412697] r7 : c09a9730 r6 : 00000207 r5 : 20736eae r4 : 20736eaa [ 3.419239] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 3.425787] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 3.433023] Control: 30c5387d Table: a9dad000 DAC: fffffffd [ 3.438789] Process e wakeup source: (pid: 1702063392, stack limit = 0x707377c3) [ 3.446198] Stack: (0xe9851fa8 to 0x70739573) [ 3.450609] [<c07d2a48>] (_raw_spin_lock_irqsave) from [<c027dc90>] (__down_read_trylock+0x14/0x54) [ 3.459703] [<c027dc90>] (__down_read_trylock) from [<c0218010>] (do_page_fault+0x78/0x27c) [ 3.468096] [<c0218010>] (do_page_fault) from [<c020840c>] (do_DataAbort+0x30/0x90) [ 3.475782] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 3.481906] ---[ end trace 3503f4aacc89a014 ]--- [ 3.486553] Alignment trap: not handling instruction e1923f9f at [<c07d2a44>] [ 3.493704] Unhandled fault: alignment exception (0x221) at 0x20736eae ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- [ 5.022595] 3f80: ea7a4de8 c0aebde0 00000001 e98a2000 00000018 e98a3fa8 c0678a64 c0678a70 [ 5.030784] 3fa0: 60000113 ffffffff [ 5.034349] [<c02122c0>] (__irq_svc) from [<c0678a70>] (cpuidle_enter_state+0x68/0x100) [ 5.042410] [<c0678a70>] (cpuidle_enter_state) from [<c0278bb8>] (cpu_startup_entry+0x1c0/0x230) [ 5.051233] [<c0278bb8>] (cpu_startup_entry) from [<80208a04>] (0x80208a04) [ 5.058217] CPU1: stopping [ 5.060974] CPU: 1 PID: -1062231336 Comm: P éa: Tainted: G D 3.14.0-10075-g2bf73dd6 #1 [ 5.069918] [<c0215bac>] (unwind_backtrace) from [<c0211768>] (show_stack+0x10/0x14) [ 5.077719] [<c0211768>] (show_stack) from [<c07c6d0c>] (dump_stack+0x88/0x98) [ 5.084987] [<c07c6d0c>] (dump_stack) from [<c02143ac>] (handle_IPI+0x148/0x174) [ 5.092415] [<c02143ac>] (handle_IPI) from [<c02088b0>] (gic_handle_irq+0x58/0x5c) [ 5.100024] [<c02088b0>] (gic_handle_irq) from [<c02122c0>] (__irq_svc+0x40/0x50) [ 5.107521] Exception stack(0xe98a1f60 to 0xe98a1fa8) [ 5.112604] 1f60: 00000000 c0b31a64 c0b31ab0 0000004c c7b256ad 00000000 26dea3be 00000001 [ 5.120808] 1f80: ea79cde8 c0aebde0 00000001 e98a0000 00000018 e98a1fa8 c0678a64 c0678a70 [ 5.128997] 1fa0: 60000113 ffffffff [ 5.132558] [<c02122c0>] (__irq_svc) from [<c0678a70>] (cpuidle_enter_state+0x68/0x100) [ 5.140627] [<c0678a70>] (cpuidle_enter_state) from [<c0278bb8>] (cpu_startup_entry+0x1c0/0x230) [ 5.149451] [<c0278bb8>] (cpu_startup_entry) from [<80208a04>] (0x80208a04) [ 5.156434] CPU3: stopping [ 5.159190] CPU: 3 PID: -1071554224 Comm: h éh éj@Ý©Ø¢¯ÀTa!À Tainted: G D 3.14.0-10075-g2bf73dd6 #1 [ 5.169314] Workqueue: 0xe8ddffff [ 5.172813] [<c0215bac>] (unwind_backtrace) from [<c0211768>] (show_stack+0x10/0x14) [ 5.180612] [<c0211768>] (show_stack) from [<c07c6d0c>] (dump_stack+0x88/0x98) [ 5.187880] [<c07c6d0c>] (dump_stack) from [<c02143ac>] (handle_IPI+0x148/0x174) [ 5.195310] [<c02143ac>] (handle_IPI) from [<c02088b0>] (gic_handle_irq+0x58/0x5c) [ 5.202924] [<c02088b0>] (gic_handle_irq) from [<c02122c0>] (__irq_svc+0x40/0x50) [ 5.210419] Exception stack(0xe98a5f60 to 0xe98a5fa8) [ 5.215504] 5f60: 00000000 c0b31a64 c0b31ab0 0000004c bc9fdfa1 00000000 26decf0a 00000001 [ 5.223707] 5f80: ea7acde8 c0aebde0 00000001 e98a4000 00000018 e98a5fa8 c0678a64 c0678a70 [ 5.231897] 5fa0: 60000113 ffffffff [ 5.235454] [<c02122c0>] (__irq_svc) from [<c0678a70>] (cpuidle_enter_state+0x68/0x100) [ 5.243517] [<c0678a70>] (cpuidle_enter_state) from [<c0278bb8>] (cpu_startup_entry+0x1c0/0x230) [ 5.252339] [<c0278bb8>] (cpu_startup_entry) from [<80208a04>] (0x80208a04) [ 5.259322] drm_kms_helper: panic occurred, switching back to text console [ 5.266396] Unable to handle kernel NULL pointer dereference at virtual address 000000c8 [ 5.274496] pgd = c0204000 [ 5.277220] [000000c8] *pgd=00000000 ~$off # PYBOOT: Exception: panic ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- C1 U-Boot >tftp 0x10800000 arm-soc/v3.14-10075-g2bf73dd6/multi_v7_defconfig/zImage tftp 0x10800000 arm-soc/v3.14-10075-g2bf73dd6/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.111 Filename 'arm-soc/v3.14-10075-g2bf73dd6/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################## 2 MiB/s done Bytes transferred = 4627040 (469a60 hex) C1 U-Boot >setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot > tftp 0x11000000 arm-soc/v3.14-10075-g2bf73dd6/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb tftp 0x11000000 arm-soc/v3.14-10075-g2bf73dd6/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.111 Filename 'arm-soc/v3.14-10075-g2bf73dd6/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'. Load address: 0x11000000 Loading: *## 177.7 KiB/s done Bytes transferred = 25705 (6469 hex) C1 U-Boot > printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk C1 U-Boot > bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x469a60 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009468 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 46.629333] smps9: 2100 mV [ 46.633161] smps10_out2: 5000 mV [ 46.637381] smps10_out1: 5000 mV [ 46.641229] ldo1: 1500 <--> 1800 mV [ 46.645812] ldo2: 2800 mV [ 46.650133] ldo3: 1500 mV [ 46.653580] ldo4: 1500 <--> 1800 mV [ 46.658810] ldo5: 1800 mV [ 46.664641] ldo6: 1200 mV [ 46.668317] ldo7: 2000 mV [ 46.672654] ldo8: 3000 mV [ 46.676845] ldo9: 1800 <--> 3000 mV at 900 mV [ 46.683002] ldoln: 1800 mV [ 46.687406] ldousb: 3250 mV [ 46.690895] REGEN1: no parameters [ 46.694438] REGEN2: no parameters [ 46.698122] regen3: no parameters [ 46.701914] SYSEN1: no parameters [ 46.705465] SYSEN2: no parameters [ 46.939569] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.219576] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.225816] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 47.233730] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 47.279640] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.293055] ALSA device list: [ 47.296155] No soundcards found. [ 47.300163] Waiting for root device /dev/mmcblk1p2... [ 47.316143] mmc2: host does not support reading read-only switch. assuming write-enable. [ 47.326359] mmc2: new high speed SDHC card at address 0001 [ 47.332324] mmcblk1: mmc2:0001 00000 14.6 GiB [ 47.337813] mmcblk1: p1 p2 [ 47.409786] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 47.418603] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 47.441525] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 47.449993] VFS: Mounted root (ext4 filesystem) readonly on device 179:50. [ 47.459720] devtmpfs: mounted [ 47.463077] Freeing unused kernel memory: 548K (c0a6b000 - c0af4000) [ 47.497046] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.538185] smps10_out1: 5000 mV [ 47.542033] ldo1: 1500 <--> 1800 mV [ 47.546632] ldo2: 2800 mV [ 47.550959] ldo3: 1500 mV [ 47.554401] ldo4: 1500 <--> 1800 mV [ 47.559631] ldo5: 1800 mV [ 47.565461] ldo6: 1200 mV [ 47.569157] ldo7: 2000 mV [ 47.573482] ldo8: 3000 mV [ 47.577679] ldo9: 1800 <--> 3000 mV at 900 mV [ 47.583857] ldoln: 1800 mV [ 47.588265] ldousb: 3250 mV [ 47.591756] REGEN1: no parameters [ 47.595310] REGEN2: no parameters [ 47.599016] regen3: no parameters [ 47.602803] SYSEN1: no parameters [ 47.606356] SYSEN2: no parameters [ 47.848859] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.190459] random: nonblocking pool is initialized [ 49.128660] omap_i2c 4807c000.i2c: controller timed out [ 49.148716] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 49.154935] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 49.162855] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 49.208934] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 49.222338] ALSA device list: [ 49.225434] No soundcards found. [ 49.229438] Waiting for root device /dev/mmcblk1p2... [ 49.245430] mmc2: host does not support reading read-only switch. assuming write-enable. [ 49.255629] mmc2: new high speed SDHC card at address 0001 [ 49.261583] mmcblk1: mmc2:0001 00000 14.6 GiB [ 49.267074] mmcblk1: p1 p2 [ 49.339074] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 49.347883] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 49.370818] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 49.379295] VFS: Mounted root (ext4 filesystem) readonly on device 179:50. [ 49.389022] devtmpfs: mounted [ 49.392381] Freeing unused kernel memory: 544K (c0a65000 - c0aed000) [ 49.426351] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.774047] VANA: 2100 mV [ 1.781341] VCXIO: 1800 mV [ 1.781341] VUSB: 3300 mV [ 1.788238] V1V8: 1800 mV [ 1.791809] V2V1: 2100 mV [ 1.797790] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.868896] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.020355] hub 1-1:1.0: USB hub found [ 2.024902] hub 1-1:1.0: 5 ports detected [ 2.148742] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.309051] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.316528] gic_timer_retrigger: lost localtimer interrupt [ 2.322845] gic_timer_retrigger: lost localtimer interrupt [ 2.329650] gic_timer_retrigger: lost localtimer interrupt [ 2.431549] smsc95xx v1.0.4 [ 2.469268] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.493682] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, f6:6c:e8:3e:01:81 [ 2.759185] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.765502] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 2.774230] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.819396] 480d5000.mmc supply vmmc_aux not found, using dummy regulator [ 2.877288] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.887664] mmc0: new high speed SDHC card at address b368 [ 2.893768] mmcblk0: mmc0:b368 00000 7.51 GiB [ 2.900177] mmcblk0: p1 p2 [ 3.063385] twl_rtc rtc.11: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.077453] ALSA device list: [ 3.077514] No soundcards found. [ 3.084594] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 3.094299] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 3.103851] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 3.120056] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.126647] mmc1: new SDIO card at address 0001 [ 3.134216] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.143493] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 3.159149] devtmpfs: mounted [ 3.162414] Freeing unused kernel memory: 544K (c0a65000 - c0aed000) [ 3.210906] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.938466] mmc0: new SDIO card at address 0001 [ 1.946072] platform 54200000.dc: Driver tegra-dc requests probe deferral [ 1.955918] platform c5000000.usb: Driver tegra-ehci requests probe deferral [ 1.995011] tegra-ehci c5004000.usb: EHCI Host Controller [ 2.000451] tegra-ehci c5004000.usb: new USB bus registered, assigned bus number 1 [ 2.008324] tegra-ehci c5004000.usb: irq 53, io mem 0xc5004000 [ 2.024903] tegra-ehci c5004000.usb: USB 2.0 started, EHCI 1.00 [ 2.031976] hub 1-0:1.0: USB hub found [ 2.035826] hub 1-0:1.0: 1 port detected [ 2.043535] tegra-ehci c5008000.usb: EHCI Host Controller [ 2.049008] tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 2 [ 2.056836] tegra-ehci c5008000.usb: irq 129, io mem 0xc5008000 [ 2.074883] tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00 [ 2.081932] hub 2-0:1.0: USB hub found [ 2.085770] hub 2-0:1.0: 1 port detected [ 2.093212] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.099846] [drm] No driver support for vblank timestamp query. [ 2.167322] Console: switching to colour frame buffer device 170x48 [ 2.195823] host1x drm: fb0: frame buffer device [ 2.200535] host1x drm: registered panic notifier [ 2.205261] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.214420] tegra-ehci c5000000.usb: EHCI Host Controller [ 2.219874] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 2.228077] tegra-ehci c5000000.usb: irq 52, io mem 0xc5000000 [ 2.246097] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 2.252744] hub 3-0:1.0: USB hub found [ 2.256547] hub 3-0:1.0: 1 port detected [ 2.261481] input: gpio-keys.4 as /devices/soc0/gpio-keys.4/input/input4 [ 2.268773] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-04-09 17:02:15 UTC (1397062935) [ 2.281257] ALSA device list: [ 2.284220] #0: NVIDIA Tegra Seaboard [ 2.289523] EXT4-fs (mmcblk0p3): mounting ext3 file system using the ext4 subsystem [ 2.325518] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.333618] VFS: Mounted root (ext3 filesystem) readonly on device 179:3. [ 2.347549] devtmpfs: mounted [ 2.350963] Freeing unused kernel memory: 544K (c0a65000 - c0aed000) [ 2.444899] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 2.500469] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.157 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-zVc1qn/tmprPH5GB-uImage tftp 0x00100000 tmp/snowball-zVc1qn/tmprPH5GB-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.157 Filename 'tmp/snowball-zVc1qn/tmprPH5GB-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################### done Bytes transferred = 4668353 (473bc1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4668289 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board trimslice-multi_v7_defconfig failure log: ------------------------------------------------- [ 4.992672] [<c07cbc80>] (_raw_spin_lock_irqsave) from [<c027cf3c>] (__down_read_trylock+0x14/0x54) [ 5.001745] [<c027cf3c>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 5.010111] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 5.017796] [<c02083d4>] (do_DataAbort) from [<c0212258>] (__dabt_svc+0x38/0x60) [ 5.025186] Exception stack(0xea03bfb8 to 0xea03c000) [ 5.030241] bfa0: 0000017c 00000017 [ 5.038424] bfc0: ea03c000 00000193 ea03c000 c0217c58 00000017 00000000 0000017c 00404100 [ 5.046605] bfe0: ea068000 ea03c0d8 c0afa380 ea03c000 c02083d4 c0217c84 00000193 ffffffff [ 5.054789] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 5.060885] ---[ end trace 982eae5966a1ca59 ]--- [ 5.065506] Alignment trap: not handling instruction e1923f9f at [<c07cbc7c>] [ 5.072637] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 8.060104] ------------[ cut here ]------------ [ 8.064749] WARNING: CPU: 0 PID: 0 at /home/build/work/batch/kernel/sched/core.c:1685 wake_up_process+0x40/0x44() [ 8.074997] Modules linked in: [ 8.078073] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 3.14.0-10075-g2bf73dd6 #1 [ 8.086372] [<c0215bac>] (unwind_backtrace) from [<c0211768>] (show_stack+0x10/0x14) [ 8.094143] [<c0211768>] (show_stack) from [<c07c6d0c>] (dump_stack+0x88/0x98) [ 8.101399] [<c07c6d0c>] (dump_stack) from [<c02454a8>] (warn_slowpath_common+0x6c/0x88) [ 8.109507] [<c02454a8>] (warn_slowpath_common) from [<c0245560>] (warn_slowpath_null+0x1c/0x24) [ 8.118300] [<c0245560>] (warn_slowpath_null) from [<c026c0f8>] (wake_up_process+0x40/0x44) [ 8.126674] [<c026c0f8>] (wake_up_process) from [<c02a292c>] (watchdog_timer_fn+0x54/0x17c) [ 8.135038] [<c02a292c>] (watchdog_timer_fn) from [<c0262da0>] (__run_hrtimer.isra.32+0x54/0xe4) [ 8.143832] [<c0262da0>] (__run_hrtimer.isra.32) from [<c0263688>] (hrtimer_interrupt+0x11c/0x2d0) [ 8.152797] [<c0263688>] (hrtimer_interrupt) from [<c0215010>] (twd_handler+0x34/0x44) [ 8.160725] [<c0215010>] (twd_handler) from [<c02860e0>] (handle_percpu_devid_irq+0x6c/0x84) [ 8.169181] [<c02860e0>] (handle_percpu_devid_irq) from [<c02824b0>] (generic_handle_irq+0x2c/0x3c) [ 8.178239] [<c02824b0>] (generic_handle_irq) from [<c020eebc>] (handle_IRQ+0x40/0x90) [ 8.186163] [<c020eebc>] (handle_IRQ) from [<c0208884>] (gic_handle_irq+0x2c/0x5c) [ 8.193744] [<c0208884>] (gic_handle_irq) from [<c02122c0>] (__irq_svc+0x40/0x50) [ 8.201223] Exception stack(0xc0aeff28 to 0xc0aeff70) [ 8.206284] ff20: 00000000 c0b3143c c0b3143c 0000004c dd957980 00000001 [ 8.214466] ff40: e069dae8 00000001 eafb3de8 c0aebde0 00000000 c0aee000 00000015 c0aeff70 [ 8.222640] ff60: c0678a64 c0678a70 60000113 ffffffff [ 8.227733] [<c02122c0>] (__irq_svc) from [<c0678a70>] (cpuidle_enter_state+0x68/0x100) [ 8.235770] [<c0678a70>] (cpuidle_enter_state) from [<c0278bb8>] (cpu_startup_entry+0x1c0/0x230) [ 8.244575] [<c0278bb8>] (cpu_startup_entry) from [<c0a65af0>] (start_kernel+0x348/0x354) [ 8.252745] ---[ end trace 982eae5966a1ca5a ]--- ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-imx_v6_v7_defconfig failure log: ------------------------------------------------- 1e40: 00000014 ed551e50 00000000 ed551e58 802bb6dc 800c5014 ee2df000 00000ff0 1e60: 7e82fc64 00000001 ee2df000 ed551eb0 ffffff9c ffffff9c ed550000 00000000 1e80: ed551eac ed551e90 800eea68 800ee324 ee2df000 00000001 ed551eb0 ed551f60 1ea0: ed551f34 ed551eb0 800f154c 800eea4c edbe1490 edc0cb80 20e1b544 00000005 1ec0: ee2df020 ee262ec0 edbe1490 edd8d8a0 eddfaa78 00000041 00000002 00000040 1ee0: 00000000 00000000 00000008 00000000 51ff4670 3361b560 4feb26b3 00000000 1f00: 51ff4670 000009e8 0005fca1 76fe4f10 ed4cc280 00000001 ed4aaa80 ffffff9c 1f20: 7e82fc64 00000014 ed551f4c ed551f38 800f1590 800f14fc 00000000 7e82fc64 1f40: ed551f94 ed551f50 800e1250 800f1580 ed551f7c edba6000 00000004 00000000 1f60: 7e832fa2 7e82fc64 76fe4f10 76fe4f10 7e82fc64 00000004 00000021 8000eac4 1f80: ed550000 00000000 ed551fa4 ed551f98 800e13b0 800e11c4 00000000 ed551fa8 1fa0: 8000e900 800e13a0 76fe4f10 7e82fc64 7e82fc64 00000004 7e82ebf4 4dd5af00 1fc0: 76fe4f10 7e82fc64 00000004 00000021 76fbbc10 00000001 76fe5000 00000000 1fe0: 00000000 7e82dbf0 76fac49b 76f48c1c 00000010 7e82fc64 7f7fa811 7f7fac11 Backtrace: [<800ec6c0>] (lookup_fast) from [<800ee440>] (path_lookupat+0x128/0x728) r10:00000000 r9:ed550000 r8:ed550030 r7:ed551eb0 r6:00000041 r5:00000000 r4:ed551e58 [<800ee318>] (path_lookupat) from [<800eea68>] (filename_lookup.isra.53+0x28/0x68) r10:00000000 r9:ed550000 r8:ffffff9c r7:ffffff9c r6:ed551eb0 r5:ee2df000 r4:00000001 [<800eea40>] (filename_lookup.isra.53) from [<800f154c>] (user_path_at_empty+0x5c/0x84) r7:ed551f60 r6:ed551eb0 r5:00000001 r4:ee2df000 [<800f14f0>] (user_path_at_empty) from [<800f1590>] (user_path_at+0x1c/0x24) r8:00000014 r7:7e82fc64 r6:ffffff9c r5:ed4aaa80 r4:00000001 [<800f1574>] (user_path_at) from [<800e1250>] (SyS_faccessat+0x98/0x1dc) [<800e11b8>] (SyS_faccessat) from [<800e13b0>] (SyS_access+0x1c/0x20) r10:00000000 r9:ed550000 r8:8000eac4 r7:00000021 r6:00000004 r5:7e82fc64 r4:76fe4f10 [<800e1394>] (SyS_access) from [<8000e900>] (ret_fast_syscall+0x0/0x48) Code: e3500000 e50b003c 0a00008d e51b1038 (e5903038) ---[ end trace 8206077c1a6f3b4b ]--- INFO: rcu_sched detected stalls on CPUs/tasks: {} (detected by 1, t=2102 jiffies, g=4294967070, c=4294967069, q=20) INFO: Stall ended before state dump start INFO: rcu_sched detected stalls on CPUs/tasks: {} (detected by 1, t=8407 jiffies, g=4294967070, c=4294967069, q=20) INFO: Stall ended before state dump start INFO: rcu_sched detected stalls on CPUs/tasks: {} (detected by 0, t=14712 jiffies, g=4294967070, c=4294967069, q=20) INFO: Stall ended before state dump start ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- => tftp 0x10800000 arm-soc/v3.14-10075-g2bf73dd6/multi_v7_defconfig/zImage tftp 0x10800000 arm-soc/v3.14-10075-g2bf73dd6/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'arm-soc/v3.14-10075-g2bf73dd6/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################## 5.1 MiB/s done Bytes transferred = 4627040 (469a60 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x11000000 arm-soc/v3.14-10075-g2bf73dd6/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 arm-soc/v3.14-10075-g2bf73dd6/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'arm-soc/v3.14-10075-g2bf73dd6/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *## 451.2 KiB/s done Bytes transferred = 29143 (71d7 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x469a60 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a1d6 Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 8 months

arm-soc build: 12 warnings 0 failures (arm-soc/v3.14-10075-g2bf73dd6)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: 2bf73dd6 Merge tag 'tags/cleanup2-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.14-10075-g2bf73dd6/ Runtime: 43m 29s Passed: 124 Failed: 0 Warnings: 12 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/mfd/sec-core.c:342:45: warning: 'regmap_rtc' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 1 net/netfilter/xt_connlimit.c:380:45: warning: division by zero [-Wdiv-by-zero] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b80): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 8 months

← Newer
1
...
14
15
16
17
18
19
20
...
32
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports April 2014