Kernel-build-reports May 2014

kernel-build-reports@lists.linaro.org

20 participants
299 discussions

next boot: 45 pass, 10 fail (next-20140516)

by Kevin's boot bot

Tree/Branch: next Git describe: next-20140516 Failed boot tests (console logs at the end) =========================================== legacy,dm365evm: FAIL: arm-davinci_all_defconfig da850-evm: FAIL: arm-davinci_all_defconfig tegra124-jetson-tk1: FAIL: arm-tegra_defconfig tegra30-beaver: FAIL: arm-tegra_defconfig sun7i-a20-cubieboard2: OFFLINE: arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y sun7i-a20-cubieboard2: FAIL: arm-multi_v7_defconfig sun4i-a10-cubieboard: FAIL: arm-multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: arm-sunxi_defconfig sun4i-a10-cubieboard: FAIL: arm-sunxi_defconfig bcm28155-ap: FAIL: arm-bcm_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 16.1 sec: FAIL da850-evm 0 min 14.2 sec: FAIL arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 59.4 sec: FAIL tegra30-beaver 0 min 41.8 sec: FAIL arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 37.6 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.8 sec: PASS omap5-uevm 1 min 36.9 sec: PASS sun7i-a20-cubieboard2 0 min 31.4 sec: OFFLINE arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 19.0 sec: PASS imx6dl-wandboard,wand-solo 0 min 19.4 sec: PASS imx6q-wandboard 0 min 17.4 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 50.4 sec: PASS am335x-boneblack 0 min 25.7 sec: PASS omap3-beagle-xm 1 min 0.9 sec: PASS legacy,3530beagle 0 min 34.4 sec: PASS (Warnings: 1) omap4-panda 1 min 12.2 sec: PASS omap3-overo-tobi 0 min 23.7 sec: PASS (Warnings: 1) am335x-bone 0 min 27.3 sec: PASS omap3-overo-storm-tobi 0 min 25.0 sec: PASS omap5-uevm 1 min 2.7 sec: PASS omap3-n900 0 min 17.6 sec: PASS (Warnings: 1) legacy,n900 0 min 17.0 sec: PASS (Warnings: 1) omap4-panda-es 1 min 8.3 sec: PASS legacy,3730storm 0 min 22.7 sec: PASS legacy,3530overo 0 min 21.0 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- qcom-apq8074-dragonboard 0 min 17.8 sec: PASS ste-snowball 1 min 19.2 sec: PASS tegra30-beaver 0 min 23.4 sec: PASS am335x-boneblack 0 min 24.1 sec: PASS omap3-beagle-xm 0 min 51.9 sec: PASS sun7i-a20-cubieboard2 0 min 39.8 sec: FAIL armada-370-mirabox 0 min 22.5 sec: PASS omap4-panda 0 min 58.9 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.3 sec: PASS sun4i-a10-cubieboard 0 min 47.6 sec: FAIL bcm28155-ap 0 min 27.9 sec: PASS omap3-overo-tobi 0 min 22.1 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.5 sec: PASS am335x-bone 0 min 26.8 sec: PASS omap3-overo-storm-tobi 0 min 21.0 sec: PASS omap5-uevm 1 min 40.2 sec: PASS omap3-n900 0 min 16.4 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.4 sec: PASS omap4-panda-es 0 min 56.1 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.4 sec: PASS tegra124-jetson-tk1 0 min 52.2 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 39.2 sec: FAIL sun4i-a10-cubieboard 0 min 43.7 sec: FAIL arm-bcm_defconfig ----------------- bcm28155-ap 0 min 45.0 sec: FAIL arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 32.6 sec: PASS exynos5250-arndale 0 min 29.8 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 0 min 33.8 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.6 sec: PASS armada-370-mirabox 0 min 20.5 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 17.1 sec: PASS Console logs for failures ========================= arm-davinci_all_defconfig ------------------------- legacy,dm365evm: FAIL: last 40 lines of boot log: ------------------------------------------------- [<c021ae68>] (cpdma_ctlr_create) from [<c0218d20>] (davinci_emac_probe+0x31c/0x5dc) r10:c7b144c0 r9:c0435c54 r8:c7b14508 r7:c04338d8 r6:c04338c8 r5:c04359a8 r4:c7b14000 [<c0218a04>] (davinci_emac_probe) from [<c01fcd40>] (platform_drv_probe+0x20/0x50) r10:c783c000 r9:00000000 r8:00000001 r7:c0457b80 r6:00000000 r5:c0457b80 r4:c04338d8 [<c01fcd20>] (platform_drv_probe) from [<c01fb6ec>] (driver_probe_device+0x118/0x240) r5:c0484330 r4:c04338d8 [<c01fb5d4>] (driver_probe_device) from [<c01fb8a8>] (__driver_attach+0x94/0x98) r8:c040c9a4 r7:00000000 r6:c043390c r5:c0457b80 r4:c04338d8 r3:00000000 [<c01fb814>] (__driver_attach) from [<c01f9cc8>] (bus_for_each_dev+0x60/0x90) r6:c01fb814 r5:c0457b80 r4:00000000 r3:00000000 [<c01f9c68>] (bus_for_each_dev) from [<c01fb1dc>] (driver_attach+0x20/0x28) r6:c0456a90 r5:c7bb9660 r4:c0457b80 [<c01fb1bc>] (driver_attach) from [<c01fade4>] (bus_add_driver+0xdc/0x1dc) [<c01fad08>] (bus_add_driver) from [<c01fbf8c>] (driver_register+0x80/0xfc) r7:c03f556c r6:c7b91940 r5:c0428b78 r4:c0457b80 [<c01fbf0c>] (driver_register) from [<c01fcc54>] (__platform_driver_register+0x50/0x64) r5:c0428b78 r4:c0428b78 [<c01fcc04>] (__platform_driver_register) from [<c040c9bc>] (davinci_emac_init+0x18/0x20) [<c040c9a4>] (davinci_emac_init) from [<c0008934>] (do_one_initcall+0x88/0x1e0) [<c00088ac>] (do_one_initcall) from [<c03f5d34>] (kernel_init_freeable+0xf4/0x1bc) r10:0000004f r9:c0415c00 r8:c0415c08 r6:c045f140 r5:00000007 r4:c041cd8c [<c03f5c40>] (kernel_init_freeable) from [<c02f7798>] (kernel_init+0x10/0xf4) r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c02f7788 r4:00000000 [<c02f7788>] (kernel_init) from [<c0009770>] (ret_from_fork+0x14/0x24) r4:00000000 r3:00000000 Code: e5903140 e2802f4f e5801140 e881000c (e5831000) ---[ end trace 82e85ba31d226190 ]--- note: swapper[1] exited with preempt_count 1 Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000000 # PYBOOT: Time: 16.12 seconds. # PYBOOT: Result: FAIL da850-evm: FAIL: last 40 lines of boot log: ------------------------------------------- [<c021ae68>] (cpdma_ctlr_create) from [<c0218d20>] (davinci_emac_probe+0x31c/0x5dc) r10:c79614c0 r9:c7831c00 r8:c7961508 r7:c7885610 r6:c7885600 r5:c7b762d0 r4:c7961000 [<c0218a04>] (davinci_emac_probe) from [<c01fcd40>] (platform_drv_probe+0x20/0x50) r10:c783c000 r9:00000000 r8:00000004 r7:c0457b80 r6:00000000 r5:c0457b80 r4:c7885610 [<c01fcd20>] (platform_drv_probe) from [<c01fb6ec>] (driver_probe_device+0x118/0x240) r5:c0484330 r4:c7885610 [<c01fb5d4>] (driver_probe_device) from [<c01fb8a8>] (__driver_attach+0x94/0x98) r8:c040c9a4 r7:00000000 r6:c7885644 r5:c0457b80 r4:c7885610 r3:00000000 [<c01fb814>] (__driver_attach) from [<c01f9cc8>] (bus_for_each_dev+0x60/0x90) r6:c01fb814 r5:c0457b80 r4:00000000 r3:00000000 [<c01f9c68>] (bus_for_each_dev) from [<c01fb1dc>] (driver_attach+0x20/0x28) r6:c0456a90 r5:c7bd8780 r4:c0457b80 [<c01fb1bc>] (driver_attach) from [<c01fade4>] (bus_add_driver+0xdc/0x1dc) [<c01fad08>] (bus_add_driver) from [<c01fbf8c>] (driver_register+0x80/0xfc) r7:c03f556c r6:c7ae9b80 r5:c0428b78 r4:c0457b80 [<c01fbf0c>] (driver_register) from [<c01fcc54>] (__platform_driver_register+0x50/0x64) r5:c0428b78 r4:c0428b78 [<c01fcc04>] (__platform_driver_register) from [<c040c9bc>] (davinci_emac_init+0x18/0x20) [<c040c9a4>] (davinci_emac_init) from [<c0008934>] (do_one_initcall+0x88/0x1e0) [<c00088ac>] (do_one_initcall) from [<c03f5d34>] (kernel_init_freeable+0xf4/0x1bc) r10:0000004f r9:c0415c00 r8:c0415c08 r6:c045f140 r5:00000007 r4:c041cd8c [<c03f5c40>] (kernel_init_freeable) from [<c02f7798>] (kernel_init+0x10/0xf4) r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c02f7788 r4:00000000 [<c02f7788>] (kernel_init) from [<c0009770>] (ret_from_fork+0x14/0x24) r4:00000000 r3:00000000 Code: e5903140 e2802f4f e5801140 e881000c (e5831000) ---[ end trace 8e523f42a65c4a3c ]--- note: swapper[1] exited with preempt_count 1 Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000000 # PYBOOT: Time: 14.21 seconds. # PYBOOT: Result: FAIL arm-tegra_defconfig ------------------- tegra124-jetson-tk1: FAIL: last 40 lines of boot log: ----------------------------------------------------- Filename 'buildroot.cpio.gz.uboot'. Load address: 0x83000000 Loading: *############################################ 816.4 KiB/s done Bytes transferred = 642602 (9ce2a hex) Tegra124 (Jetson TK1) # tftp 0x82000000 192.168.1.2:tmp/jetson-lmF48z/tegra124-jetson-tk1.dtb tftp 0x82000000 192.168.1.2:tmp/jetson-lmF48z/tegra124-jetson-tk1.dtb Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.189 Filename 'tmp/jetson-lmF48z/tegra124-jetson-tk1.dtb'. Load address: 0x82000000 Loading: *### 788.1 KiB/s done Bytes transferred = 42784 (a720 hex) Tegra124 (Jetson TK1) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 debug earlyprintk ip=192.168.1.189:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 Tegra124 (Jetson TK1) # bootz 0x81000000 0x83000000 0x82000000 bootz 0x81000000 0x83000000 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x430d48 ] ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200d71f Starting kernel ... Uncompressing Linux... done, booting the kernel. ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 59.36 seconds. # PYBOOT: Result: FAIL tegra30-beaver: FAIL: last 40 lines of boot log: ------------------------------------------------ Filename 'buildroot.cpio.gz.uboot'. Load address: 0x82000000 Loading: *############################################ 2.2 MiB/s done Bytes transferred = 642602 (9ce2a hex) Tegra30 (Beaver) # tftp 0x83000000 192.168.1.2:tmp/beaver-esJWpD/tegra30-beaver.dtb tftp 0x83000000 192.168.1.2:tmp/beaver-esJWpD/tegra30-beaver.dtb Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.222 Filename 'tmp/beaver-esJWpD/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: *## 1.9 MiB/s done Bytes transferred = 24197 (5e85 hex) Tegra30 (Beaver) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 debug earlyprintk Tegra30 (Beaver) # bootz 0x81000000 0x82000000 0x83000000 bootz 0x81000000 0x82000000 0x83000000 Kernel image @ 0x81000000 [ 0x000000 - 0x430d48 ] ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83008e84 Starting kernel ... Uncompressing Linux... done, booting the kernel. ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 41.81 seconds. # PYBOOT: Result: FAIL arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- sun7i-a20-cubieboard2: OFFLINE: last 40 lines of boot log: ---------------------------------------------------------- Connected to cubie2 console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(cubie2 console)> hardreset (user:khilman) Reboot cubie2 Reboot: cubie2 ; phidget 3 0 : off, sleep, on 0 sun7i# ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.41 seconds. # PYBOOT: Result: OFFLINE arm-multi_v7_defconfig ---------------------- sun7i-a20-cubieboard2: FAIL: last 40 lines of boot log: ------------------------------------------------------- Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x42000000 192.168.1.2:tmp/cubie2-wKyc4e/sun7i-a20-cubieboard2.dtb tftp 0x42000000 192.168.1.2:tmp/cubie2-wKyc4e/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.186 Filename 'tmp/cubie2-wKyc4e/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: *## 2.2 MiB/s done Bytes transferred = 18501 (4845 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.186:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 sun7i# bootz 0x41000000 0x43000000 0x42000000 bootz 0x41000000 0x43000000 0x42000000 Kernel image @ 0x41000000 [ 0x000000 - 0x47b1c0 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Using Device Tree in place at 42000000, end 42007844 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 39.81 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 40 lines of boot log: ------------------------------------------------------ Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x42000000 192.168.1.2:tmp/cubie-u4EJcA/sun4i-a10-cubieboard.dtb tftp 0x42000000 192.168.1.2:tmp/cubie-u4EJcA/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-u4EJcA/sun4i-a10-cubieboard.dtb'. Load address: 0x42000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15184 (3b50 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 sun4i# bootz 0x41008000 0x43000000 0x42000000 bootz 0x41008000 0x43000000 0x42000000 Kernel image @ 0x41008000 [ 0x000000 - 0x47b1c0 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 47.56 seconds. # PYBOOT: Result: FAIL arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2: FAIL: last 40 lines of boot log: ------------------------------------------------------- Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.8 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x42000000 192.168.1.2:tmp/cubie2-REEdbW/sun7i-a20-cubieboard2.dtb tftp 0x42000000 192.168.1.2:tmp/cubie2-REEdbW/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.186 Filename 'tmp/cubie2-REEdbW/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: *## 2.2 MiB/s done Bytes transferred = 18501 (4845 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.186:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 sun7i# bootz 0x41000000 0x43000000 0x42000000 bootz 0x41000000 0x43000000 0x42000000 Kernel image @ 0x41000000 [ 0x000000 - 0x1c4bf8 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Using Device Tree in place at 42000000, end 42007844 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 39.18 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 40 lines of boot log: ------------------------------------------------------ Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x42000000 192.168.1.2:tmp/cubie-M7sqOr/sun4i-a10-cubieboard.dtb tftp 0x42000000 192.168.1.2:tmp/cubie-M7sqOr/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-M7sqOr/sun4i-a10-cubieboard.dtb'. Load address: 0x42000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15184 (3b50 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 sun4i# bootz 0x41008000 0x43000000 0x42000000 bootz 0x41008000 0x43000000 0x42000000 Kernel image @ 0x41008000 [ 0x000000 - 0x1c4bf8 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 43.67 seconds. # PYBOOT: Result: FAIL arm-bcm_defconfig ----------------- bcm28155-ap: FAIL: last 40 lines of boot log: --------------------------------------------- OKAY [ 0.684s] finished. total time: 0.934s GET_DESC ->STRING DESC sending 'device-tree' (7 KB)... OKAY [ 0.001s] writing 'device-tree'... downloading of 7575 bytes finished Flashing Raw Image Writing to partition 'device-tree' Writing 'device-tree' DOKAY [ 0.013s] finished. total time: 0.014s ONE! GET_DESC ->STunknown partition 'initrd' error: cannot determine image filename for 'initrd' RING DESC GET_DESC ->STresuming boot... RING DESC MMCOKAY [ 0.001s] finished. total time: 0.001s read: dev #['/home/khilman/bin/fastboot.py', 'capri', 'tmp/capri-KRV1JZ/zImage', 'tmp/capri-KRV1JZ/bcm28155-ap.dtb', 'None'] /home/khilman/bin/fastboot.py capri tmp/capri-KRV1JZ/zImage tmp/capri-KRV1JZ/bcm28155-ap.dtb None TFTP: download kernel (tmp/capri-KRV1JZ/zImage) to /tmp/kernel-fMEXCc TFTP: download dtb (tmp/capri-KRV1JZ/bcm28155-ap.dtb) to /tmp/dtb-1p4f0k Deleting /tmp/kernel-fMEXCc Deleting /tmp/dtb-1p4f0k 0, block # 72320, count 16384 ... 16384 blocks read: OK MMC read: dev # 0, block # 114688, count 32768 ... 32768 blocks read: OK ## Flattened Device Tree blob at 9e000000 Booting using the fdt blob at 0x9e000000 Using Device Tree in place at 9e000000, end 9e004d96 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 45.01 seconds. # PYBOOT: Result: FAIL

10 years, 7 months

next boot: 22 passed 11 failed (next/next-20140516)

by Olof's autobooter

Failed boards: beaver tegra_defconfig : FAILED 1:04.23 capri bcm_defconfig : FAILED 1:06.75 cubie sunxi_defconfig : FAILED 1:02.86 cubie multi_v7_defconfig : FAILED 1:01.22 cubie2 sunxi_defconfig : FAILED 1:00.59 cubie2 multi_v7_defconfig : FAILED 0:59.32 cubie2 multi_lpae_defconfig : FAILED 0:58.85 dalmore tegra_defconfig : FAILED 1:10.14 seaboard tegra_defconfig : FAILED 1:09.56 snowball multi_v7_defconfig : FAILED 1:07.81 trimslice tegra_defconfig : FAILED 1:08.29 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:15.64 arndale exynos_defconfig : passed 1:07.27 bbb omap2plus_defconfig : passed 1:37.92 bbb multi_v7_defconfig : passed 1:22.56 beaver multi_v7_defconfig : passed 0:52.25 capri multi_v7_defconfig : passed 0:44.42 dalmore multi_v7_defconfig : passed 1:16.70 dalmore multi_lpae_defconfig : passed 1:21.76 hummingboard imx_v6_v7_defconfig : passed 1:25.85 hummingboard multi_v7_defconfig : passed 1:08.93 omap5uevm omap2plus_defconfig : passed 1:12.71 omap5uevm multi_v7_defconfig : passed 1:44.04 omap5uevm multi_lpae_defconfig : passed 1:38.09 panda omap2plus_defconfig : warnings 1:14.71 panda multi_v7_defconfig : passed 2:17.00 sama5 sama5_defconfig : passed 2:07.99 seaboard multi_v7_defconfig : passed 1:02.52 snow exynos_defconfig : passed 1:31.95 snowball u8500_defconfig : passed 2:16.98 trimslice multi_v7_defconfig : passed 0:58.13 wandboard imx_v6_v7_defconfig : passed 0:59.05 wandboard multi_v7_defconfig : passed 0:55.37 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-tegra_defconfig failure log: ------------------------------------------------- tftp 0x82000000 next/next-20140516/tegra_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.108 Filename 'next/next-20140516/tegra_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################### 3.4 MiB/s done Bytes transferred = 4377400 (42cb38 hex) Tegra30 (Beaver) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra30 (Beaver) # tftp 0x83000000 next/next-20140516/tegra_defconfig/dtbs/tegra30-beaver.dtb tftp 0x83000000 next/next-20140516/tegra_defconfig/dtbs/tegra30-beaver.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.108 Filename 'next/next-20140516/tegra_defconfig/dtbs/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: *## 2.9 MiB/s done Bytes transferred = 24197 (5e85 hex) Tegra30 (Beaver) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 earlyprintk debug root=/dev/mmcblk0p1 rootwait Tegra30 (Beaver) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x42cb38 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff7000, end 8ffffe84 ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-bcm_defconfig failure log: ------------------------------------------------- bcm_defconfig/zImage next/next-20140516/bcm_defconfig/dtbs/bcm28155-ap.dtb (user:build) Load fastboot kernel GET_DESC ->STRING DESC sending 'kernel' (2401 KB)... ..........................................................................OKAY [ 0.529s] writing 'kernel'... . downloading of 2459384 bytes finished Flashing Raw Image Writing to partition 'kernel' Writing 'OKAY [ 0.190s] finished. total time: 0.720s kernel' DONE! GET_DESC ->STRING DESC sending 'device-tree' (7 KB)... OKAY [ 0.005s] writing 'device-tree'... downloading of 7575 bytes finished Flashing Raw Image Writing to partition 'device-tree' Writing 'device-tree' DONE! OKAY [ 0.013s] finished. total time: 0.019s GET_DESC ->STRING DESC resuming boot... OKAY [ 0.001s] finished. total time: 0.001s MMC read: dev # 0, block # 72320, count 16384 ... 16384 blocks read: OK MMC read: dev # 0, block # 114688, count 32768 ... 32768 blocks read: OK ## Flattened Device Tree blob at 9e000000 Booting using the fdt blob at 0x9e000000 Using Device Tree in place at 9e000000, end 9e004d96 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- sun4i#tftp 0x42000000 next/next-20140516/multi_v7_defconfig/zImage tftp 0x42000000 next/next-20140516/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.141 Filename 'next/next-20140516/multi_v7_defconfig/zImage'. Load address: 0x42000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################### 2.9 MiB/s done Bytes transferred = 4668848 (473db0 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x48000000 next/next-20140516/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x48000000 next/next-20140516/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.141 Filename 'next/next-20140516/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x48000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15184 (3b50 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x42000000 - 0x48000000 bootz 0x42000000 - 0x48000000 Kernel image @ 0x42000000 [ 0x000000 - 0x473db0 ] ## Flattened Device Tree blob at 48000000 Booting using the fdt blob at 0x48000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.141 sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x42000000 next/next-20140516/sunxi_defconfig/zImage tftp 0x42000000 next/next-20140516/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.141 Filename 'next/next-20140516/sunxi_defconfig/zImage'. Load address: 0x42000000 Loading: *################################################################# ############################################################# 3 MiB/s done Bytes transferred = 1845656 (1c2998 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x48000000 next/next-20140516/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x48000000 next/next-20140516/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.141 Filename 'next/next-20140516/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x48000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15184 (3b50 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x42000000 - 0x48000000 bootz 0x42000000 - 0x48000000 Kernel image @ 0x42000000 [ 0x000000 - 0x1c2998 ] ## Flattened Device Tree blob at 48000000 Booting using the fdt blob at 0x48000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- sun7i# tftp 0x42000000 next/next-20140516/multi_lpae_defconfig/zImage tftp 0x42000000 next/next-20140516/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.117 Filename 'next/next-20140516/multi_lpae_defconfig/zImage'. Load address: 0x42000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ 4.2 MiB/s done Bytes transferred = 4693776 (479f10 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x44000000 next/next-20140516/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x44000000 next/next-20140516/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.117 Filename 'next/next-20140516/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x44000000 Loading: *## 785.2 KiB/s done Bytes transferred = 18501 (4845 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x42000000 - 0x44000000 bootz 0x42000000 - 0x44000000 Kernel image @ 0x42000000 [ 0x000000 - 0x479f10 ] ## Flattened Device Tree blob at 44000000 Booting using the fdt blob at 0x44000000 Loading Device Tree to 40ff8000, end 40fff844 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x42000000 next/next-20140516/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.117 Filename 'next/next-20140516/multi_v7_defconfig/zImage'. Load address: 0x42000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################### 4.3 MiB/s done Bytes transferred = 4668848 (473db0 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x44000000 next/next-20140516/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x44000000 nenode: cubie2 status: on xt/next-20140516/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.117 Filename 'next/next-20140516/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x44000000 Loading: *## 3.5 MiB/s done Bytes transferred = 18501 (4845 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i#bootz 0x42000000 - 0x44000000 bootz 0x42000000 - 0x44000000 Kernel image @ 0x42000000 [ 0x000000 - 0x473db0 ] ## Flattened Device Tree blob at 44000000 Booting using the fdt blob at 0x44000000 Loading Device Tree to 40ff8000, end 40fff844 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.117 sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x42000000 next/next-20140516/sunxi_defconfig/zImage tftp 0x42000000 next/next-20140516/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.117 Filename 'next/next-20140516/sunxi_defconfig/zImage'. Load address: 0x42000000 Loading: *################################################################# ############################################################# 4.4 MiB/s done Bytes transferred = 1845656 (1c2998 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x44000000 next/next-20140516/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x44000000 next/next-20140516/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.117 Filename 'next/next-20140516/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x44000000 Loading: *## 4.4 MiB/s done Bytes transferred = 18501 (4845 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i#bootz 0x42000000 - 0x44000000 bootz 0x42000000 - 0x44000000 Kernel image @ 0x42000000 [ 0x000000 - 0x1c2998 ] ## Flattened Device Tree blob at 44000000 Booting using the fdt blob at 0x44000000 Loading Device Tree to 40ff8000, end 40fff844 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-tegra_defconfig failure log: ------------------------------------------------- tftp 0x82000000 next/next-20140516/tegra_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'next/next-20140516/tegra_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################### 3 MiB/s done Bytes transferred = 4377400 (42cb38 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 next/next-20140516/tegra_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 next/next-20140516/tegra_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'next/next-20140516/tegra_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 2.5 MiB/s done Bytes transferred = 34244 (85c4 hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x42cb38 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff5c3 ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. ~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-tegra_defconfig failure log: ------------------------------------------------- tftp 0x800000 next/next-20140516/tegra_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.119 Filename 'next/next-20140516/tegra_defconfig/zImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################### 3.4 MiB/s done Bytes transferred = 4377400 (42cb38 hex) Tegra20 (SeaBoard) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra20 (SeaBoard) # tftp 0x1800000 next/next-20140516/tegra_defconfig/dtbs/tegra20-seaboard.dtb tftp 0x1800000 next/next-20140516/tegra_defconfig/dtbs/tegra20-seaboard.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.119 Filename 'next/next-20140516/tegra_defconfig/dtbs/tegra20-seaboard.dtb'. Load address: 0x1800000 Loading: *## 90.8 KiB/s done Bytes transferred = 26465 (6761 hex) Tegra20 (SeaBoard) # printenv bootargs printenv bootargs bootargs=root=/dev/mmcblk0p3 console=ttyS0,115200 debug earlyprintk Tegra20 (SeaBoard) # bootz 0x800000 - 0x1800000 bootz 0x800000 - 0x1800000 Kernel image @ 0x800000 [ 0x000000 - 0x42cb38 ] ## Flattened Device Tree blob at 01800000 Booting using the fdt blob at 0x1800000 Loading Device Tree to 0fff6000, end 0ffff760 ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.115 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-ERYZMz/tmpOCNBfF-uImage tftp 0x01000000 tmp/snowball-ERYZMz/tmpOCNBfF-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.115 Filename 'tmp/snowball-ERYZMz/tmpOCNBfF-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################# done Bytes transferred = 4710157 (47df0d hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4710093 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board trimslice-tegra_defconfig failure log: ------------------------------------------------- tftp 0x800000 next/next-20140516/tegra_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.105 Filename 'next/next-20140516/tegra_defconfig/zImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################### 2.9 MiB/s done Bytes transferred = 4377400 (42cb38 hex) Tegra20 (TrimSlice) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra20 (TrimSlice) # tftp 0x1800000 next/next-20140516/tegra_defconfig/dtbs/tegra20-trimslice.dtb tftp 0x1800000 next/next-20140516/tegra_defconfig/dtbs/tegra20-trimslice.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.105 Filename 'next/next-20140516/tegra_defconfig/dtbs/tegra20-trimslice.dtb'. Load address: 0x1800000 Loading: *## 2.4 MiB/s done Bytes transferred = 20401 (4fb1 hex) Tegra20 (TrimSlice) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw Tegra20 (TrimSlice) # bootz 0x800000 - 0x1800000 bootz 0x800000 - 0x1800000 Kernel image @ 0x800000 [ 0x000000 - 0x42cb38 ] ## Flattened Device Tree blob at 01800000 Booting using the fdt blob at 0x1800000 Loading Device Tree to 0fff8000, end 0fffffb0 ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. ~$off # PYBOOT: Exception: timeout

10 years, 7 months

next build: 380 warnings 2 failures (next/next-20140516)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: 4151fa6 Add linux-next specific files for 20140516 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140516/ Runtime: 42m 33s Passed: 122 Failed: 2 Warnings: 380 Section mismatches: 50 ------------------------------------------------------------------------------- Failed defconfigs: exynos_defconfig lpc32xx_defconfig ------------------------------------------------------------------------------- Errors: exynos_defconfig: arch/arm/boot/dts/exynos5260.dtsi:14:46: fatal error: dt-bindings/clock/exynos5260-clk.h: No such file or directory lpc32xx_defconfig: arch/arm/mach-lpc32xx/phy3250.c:205:2: error: unknown field 'dma_filter' specified in initializer Warnings: 1 arch/arm/mach-exynos/exynos.c:207:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 1 drivers/char/hw_random/timeriomem-rng.c:156:33: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 7 drivers/char/hw_random/atmel-rng.c:75:17: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 10 include/linux/bitops.h:48) [-Wdeprecated-declarations] 25 kernel/events/core.c:7435:35: warning: unused variable 'tmp' [-Wunused-variable] 108 mm/compaction.c:773:15: warning: 'next_free_pfn' may be used uninitialized in this function [-Wmaybe-uninitialized] 111 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 111 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128a8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128b0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128b8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128c0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128c8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128d0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128d8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128e0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128e8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128f0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128f8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x12900): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x1e4): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x1ec): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x1f4): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x1fc): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x204): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x20c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x214): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x21c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x224): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x22c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x234): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x23c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x15c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x164): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x16c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x174): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x17c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x184): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x18c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x194): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x19c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x1a4): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x1ac): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x1b4): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28388): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28390): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28398): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283a0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283a8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283b0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283b8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283c0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283c8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283d0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283d8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283e0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown)

10 years, 7 months

next boot: 21 passed 12 failed (next/next-20140515)

by Olof's autobooter

Failed boards: beaver tegra_defconfig : FAILED 1:03.90 capri bcm_defconfig : FAILED 1:02.98 cubie sunxi_defconfig : FAILED 1:05.33 cubie multi_v7_defconfig : FAILED 1:00.77 cubie2 sunxi_defconfig : FAILED 1:00.01 cubie2 multi_v7_defconfig : FAILED 1:01.68 cubie2 multi_lpae_defconfig : FAILED 0:58.75 dalmore tegra_defconfig : FAILED 1:09.44 panda multi_v7_defconfig : FAILED 1:35.41 seaboard tegra_defconfig : FAILED 1:09.85 snowball multi_v7_defconfig : FAILED 1:08.39 trimslice tegra_defconfig : FAILED 1:07.78 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:16.05 arndale exynos_defconfig : passed 1:07.83 bbb omap2plus_defconfig : passed 1:34.57 bbb multi_v7_defconfig : passed 1:24.49 beaver multi_v7_defconfig : passed 0:48.15 capri multi_v7_defconfig : passed 0:44.59 dalmore multi_v7_defconfig : passed 1:17.10 dalmore multi_lpae_defconfig : passed 1:16.70 hummingboard imx_v6_v7_defconfig : passed 1:25.40 hummingboard multi_v7_defconfig : passed 1:08.42 omap5uevm omap2plus_defconfig : passed 1:11.72 omap5uevm multi_v7_defconfig : passed 1:44.62 omap5uevm multi_lpae_defconfig : passed 1:37.44 panda omap2plus_defconfig : warnings 1:14.07 sama5 sama5_defconfig : passed 1:51.04 seaboard multi_v7_defconfig : passed 1:08.19 snow exynos_defconfig : passed 1:53.03 snowball u8500_defconfig : passed 2:09.61 trimslice multi_v7_defconfig : passed 0:55.36 wandboard imx_v6_v7_defconfig : passed 1:00.07 wandboard multi_v7_defconfig : passed 1:01.51 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-tegra_defconfig failure log: ------------------------------------------------- tftp 0x82000000 next/next-20140515/tegra_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.108 Filename 'next/next-20140515/tegra_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################### 3.3 MiB/s done Bytes transferred = 4377496 (42cb98 hex) Tegra30 (Beaver) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra30 (Beaver) # tftp 0x83000000 next/next-20140515/tegra_defconfig/dtbs/tegra30-beaver.dtb tftp 0x83000000 next/next-20140515/tegra_defconfig/dtbs/tegra30-beaver.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.108 Filename 'next/next-20140515/tegra_defconfig/dtbs/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: *## 454.1 KiB/s done Bytes transferred = 24197 (5e85 hex) Tegra30 (Beaver) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 earlyprintk debug root=/dev/mmcblk0p1 rootwait Tegra30 (Beaver) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x42cb98 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff7000, end 8ffffe84 ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-bcm_defconfig failure log: ------------------------------------------------- bcm_defconfig/zImage next/next-20140515/bcm_defconfig/dtbs/bcm28155-ap.dtb (user:build) Load fastboot kernel GET_DESC ->STRING DESC sending 'kernel' (2401 KB)... ...........................................................................OKAY [ 0.492s] writing 'kernel'... downloading of 2459224 bytes finished Flashing Raw Image Writing to partition 'kernel' WriOKAY [ 0.679s] finished. total time: 1.170s ting 'kernel' DONE! GET_DESC ->STRING DESC sending 'device-tree' (7 KB)... downloaOKAY [ 0.009s] writing 'device-tree'... ding of 7575 bytes finished Flashing Raw Image Writing to partition 'device-tree' Writing 'devicOKAY [ 0.009s] finished. total time: 0.018s e-tree' DONE! GET_DESC ->STRING DESC resuming boot... OKAY [ 0.002s] finished. total time: 0.002s MMC read: dev # 0, block # 72320, count 16384 ... 16384 blocks read: OK MMC read: dev # 0, block # 114688, count 32768 ... 32768 blocks read: OK ## Flattened Device Tree blob at 9e000000 Booting using the fdt blob at 0x9e000000 Using Device Tree in place at 9e000000, end 9e004d96 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- sun4i#tftp 0x42000000 next/next-20140515/multi_v7_defconfig/zImage tftp 0x42000000 next/next-20140515/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.139 Filename 'next/next-20140515/multi_v7_defconfig/zImage'. Load address: 0x42000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################### 2.9 MiB/s done Bytes transferred = 4668648 (473ce8 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x48000000 next/next-20140515/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x48000000 next/next-20140515/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.139 Filename 'next/next-20140515/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x48000000 Loading: *## 529.3 KiB/s done Bytes transferred = 15184 (3b50 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x42000000 - 0x48000000 bootz 0x42000000 - 0x48000000 Kernel image @ 0x42000000 [ 0x000000 - 0x473ce8 ] ## Flattened Device Tree blob at 48000000 Booting using the fdt blob at 0x48000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.139 sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x42000000 next/next-20140515/sunxi_defconfig/zImage tftp 0x42000000 next/next-20140515/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.139 Filename 'next/next-20140515/sunxi_defconfig/zImage'. Load address: 0x42000000 Loading: *################################################################# ############################################################# 2.8 MiB/s done Bytes transferred = 1845608 (1c2968 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x48000000 next/next-20140515/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x48000000 next/next-20140515/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.139 Filename 'next/next-20140515/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x48000000 Loading: *## 570.3 KiB/s done Bytes transferred = 15184 (3b50 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x42000000 - 0x48000000 bootz 0x42000000 - 0x48000000 Kernel image @ 0x42000000 [ 0x000000 - 0x1c2968 ] ## Flattened Device Tree blob at 48000000 Booting using the fdt blob at 0x48000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- sun7i# tftp 0x42000000 next/next-20140515/multi_lpae_defconfig/zImage tftp 0x42000000 next/next-20140515/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.116 Filename 'next/next-20140515/multi_lpae_defconfig/zImage'. Load address: 0x42000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ 4.3 MiB/s done Bytes transferred = 4691800 (479758 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x44000000 next/next-20140515/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x44000000 next/next-20140515/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.116 Filename 'next/next-20140515/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x44000000 Loading: *## 3.5 MiB/s done Bytes transferred = 18501 (4845 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x42000000 - 0x44000000 bootz 0x42000000 - 0x44000000 Kernel image @ 0x42000000 [ 0x000000 - 0x479758 ] ## Flattened Device Tree blob at 44000000 Booting using the fdt blob at 0x44000000 Loading Device Tree to 40ff8000, end 40fff844 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x42000000 next/next-20140515/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.116 Filename 'next/next-20140515/multi_v7_defconfig/zImage'. Load address: 0x42000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################### 4.4 MiB/s done Bytes transferred = 4668648 (473ce8 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x44000000 next/next-20140515/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x44000000 nenode: cubie2 status: on xt/next-20140515/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.116 Filename 'next/next-20140515/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x44000000 Loading: *## 752 KiB/s done Bytes transferred = 18501 (4845 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x42000000 - 0x44000000 bootz 0x42000000 - 0x44000000 Kernel image @ 0x42000000 [ 0x000000 - 0x473ce8 ] ## Flattened Device Tree blob at 44000000 Booting using the fdt blob at 0x44000000 Loading Device Tree to 40ff8000, end 40fff844 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.116 sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x42000000 next/next-20140515/sunxi_defconfig/zImage tftp 0x42000000 next/next-20140515/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.116 Filename 'next/next-20140515/sunxi_defconfig/zImage'. Load address: 0x42000000 Loading: *################################################################# ############################################################# 4.3 MiB/s done Bytes transferred = 1845608 (1c2968 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x44000000 next/next-20140515/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x44000000 next/next-20140515/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.116 Filename 'next/next-20140515/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x44000000 Loading: *## 3.5 MiB/s done Bytes transferred = 18501 (4845 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x42000000 - 0x44000000 bootz 0x42000000 - 0x44000000 Kernel image @ 0x42000000 [ 0x000000 - 0x1c2968 ] ## Flattened Device Tree blob at 44000000 Booting using the fdt blob at 0x44000000 Loading Device Tree to 40ff8000, end 40fff844 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-tegra_defconfig failure log: ------------------------------------------------- tftp 0x82000000 next/next-20140515/tegra_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'next/next-20140515/tegra_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################### 3 MiB/s done Bytes transferred = 4377496 (42cb98 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 next/next-20140515/tegra_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 next/next-20140515/tegra_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'next/next-20140515/tegra_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 928.7 KiB/s done Bytes transferred = 34244 (85c4 hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x42cb98 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff5c3 ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.687561] usbhid: USB HID core driver [ 1.695922] TCP: cubic registered [ 1.699432] NET: Registered protocol family 17 [ 1.704284] Key type dns_resolver registered [ 1.709259] Power Management for TI OMAP4+ devices. [ 1.714416] Power Management for TI OMAP4. [ 1.718719] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.726135] ThumbEE CPU extension supported. [ 1.726135] Registering SWP/SWPB emulation handler [ 1.736450] vwl1271: 1800 mV [ 1.741149] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.750885] twl 0-0048: PIH (irq 39) nested IRQs [ 1.756927] twl_rtc rtc.15: Power up reset detected. [ 1.762817] twl_rtc rtc.15: Enabling TWL-RTC [ 1.769622] twl_rtc rtc.15: rtc core: registered rtc.15 as rtc0 [ 1.776702] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.782806] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.788970] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.795074] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.800628] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.806091] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.811126] VDAC: 1800 mV [ 1.811126] VANA: 2100 mV [ 1.818450] VCXIO: 1800 mV [ 1.821838] VUSB: 3300 mV [ 1.825408] V1V8: 1800 mV [ 1.829010] V2V1: 2100 mV [ 1.834960] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.906402] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.077819] hub 1-1:1.0: USB hub found [ 2.082061] hub 1-1:1.0: 5 ports detected [ 2.146820] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.236572] gic_timer_retrigger: lost localtimer interrupt [ 2.242706] gic_timer_retrigger: lost localtimer interrupt [ 2.376312] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.457000] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.511047] smsc95xx v1.0.4 [ 2.608184] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, fa:ac:02:a1:b3:b0 ~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-tegra_defconfig failure log: ------------------------------------------------- tftp 0x800000 next/next-20140515/tegra_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.117 Filename 'next/next-20140515/tegra_defconfig/zImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################### 3.3 MiB/s done Bytes transferred = 4377496 (42cb98 hex) Tegra20 (SeaBoard) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra20 (SeaBoard) # tftp 0x1800000 next/next-20140515/tegra_defconfig/dtbs/tegra20-seaboard.dtb tftp 0x1800000 next/next-20140515/tegra_defconfig/dtbs/tegra20-seaboard.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.117 Filename 'next/next-20140515/tegra_defconfig/dtbs/tegra20-seaboard.dtb'. Load address: 0x1800000 Loading: *## 2.8 MiB/s done Bytes transferred = 26465 (6761 hex) Tegra20 (SeaBoard) # printenv bootargs printenv bootargs bootargs=root=/dev/mmcblk0p3 console=ttyS0,115200 debug earlyprintk Tegra20 (SeaBoard) # bootz 0x800000 - 0x1800000 bootz 0x800000 - 0x1800000 Kernel image @ 0x800000 [ 0x000000 - 0x42cb98 ] ## Flattened Device Tree blob at 01800000 Booting using the fdt blob at 0x1800000 Loading Device Tree to 0fff6000, end 0ffff760 ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.118 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-iuFyYC/tmpGIQ3M3-uImage tftp 0x01000000 tmp/snowball-iuFyYC/tmpGIQ3M3-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.118 Filename 'tmp/snowball-iuFyYC/tmpGIQ3M3-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################# done Bytes transferred = 4709957 (47de45 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4709893 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board trimslice-tegra_defconfig failure log: ------------------------------------------------- tftp 0x800000 next/next-20140515/tegra_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.105 Filename 'next/next-20140515/tegra_defconfig/zImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################### 2.9 MiB/s done Bytes transferred = 4377496 (42cb98 hex) Tegra20 (TrimSlice) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra20 (TrimSlice) # tftp 0x1800000 next/next-20140515/tegra_defconfig/dtbs/tegra20-trimslice.dtb tftp 0x1800000 next/next-20140515/tegra_defconfig/dtbs/tegra20-trimslice.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.105 Filename 'next/next-20140515/tegra_defconfig/dtbs/tegra20-trimslice.dtb'. Load address: 0x1800000 Loading: *## 2.8 MiB/s done Bytes transferred = 20401 (4fb1 hex) Tegra20 (TrimSlice) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw Tegra20 (TrimSlice) # bootz 0x800000 - 0x1800000 bootz 0x800000 - 0x1800000 Kernel image @ 0x800000 [ 0x000000 - 0x42cb98 ] ## Flattened Device Tree blob at 01800000 Booting using the fdt blob at 0x1800000 Loading Device Tree to 0fff8000, end 0fffffb0 ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. ~$off # PYBOOT: Exception: timeout

10 years, 7 months

next boot: 45 pass, 7 fail (next-20140515)

by Kevin's boot bot

Tree/Branch: next Git describe: next-20140515 Failed boot tests (console logs at the end) =========================================== tegra30-beaver: FAIL: arm-tegra_defconfig sun7i-a20-cubieboard2: OFFLINE: arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y sun7i-a20-cubieboard2: FAIL: arm-multi_v7_defconfig sun4i-a10-cubieboard: FAIL: arm-multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: arm-sunxi_defconfig sun4i-a10-cubieboard: FAIL: arm-sunxi_defconfig bcm28155-ap: FAIL: arm-bcm_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.4 sec: PASS da850-evm 0 min 15.6 sec: PASS arm-tegra_defconfig ------------------- tegra30-beaver 0 min 41.9 sec: FAIL arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- armada-xp-openblocks-ax3-4 0 min 26.4 sec: PASS omap5-uevm 1 min 39.5 sec: PASS sun7i-a20-cubieboard2 0 min 31.4 sec: OFFLINE arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 18.8 sec: PASS imx6dl-wandboard,wand-solo 0 min 19.0 sec: PASS imx6q-wandboard 0 min 17.4 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 52.6 sec: PASS am335x-boneblack 0 min 25.6 sec: PASS omap3-beagle-xm 1 min 0.8 sec: PASS legacy,3530beagle 0 min 39.7 sec: PASS (Warnings: 1) omap4-panda 1 min 2.3 sec: PASS omap3-overo-tobi 0 min 23.4 sec: PASS (Warnings: 1) am335x-bone 0 min 27.4 sec: PASS omap3-overo-storm-tobi 0 min 23.1 sec: PASS omap5-uevm 1 min 5.4 sec: PASS omap3-n900 0 min 17.6 sec: PASS (Warnings: 1) legacy,n900 0 min 17.2 sec: PASS (Warnings: 1) omap4-panda-es 1 min 11.4 sec: PASS legacy,3730storm 0 min 23.2 sec: PASS legacy,3530overo 0 min 20.9 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- qcom-apq8074-dragonboard 0 min 17.8 sec: PASS ste-snowball 1 min 22.4 sec: PASS tegra30-beaver 0 min 21.0 sec: PASS am335x-boneblack 0 min 24.1 sec: PASS omap3-beagle-xm 0 min 50.7 sec: PASS sun7i-a20-cubieboard2 0 min 40.0 sec: FAIL armada-370-mirabox 0 min 22.4 sec: PASS omap4-panda 0 min 57.2 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.4 sec: PASS sun4i-a10-cubieboard 0 min 44.6 sec: FAIL bcm28155-ap 0 min 27.9 sec: PASS omap3-overo-tobi 0 min 22.0 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.3 sec: PASS am335x-bone 0 min 26.8 sec: PASS omap3-overo-storm-tobi 0 min 21.1 sec: PASS omap5-uevm 1 min 35.6 sec: PASS omap3-n900 0 min 16.2 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.0 sec: PASS omap4-panda-es 0 min 58.3 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.4 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 39.1 sec: FAIL sun4i-a10-cubieboard 0 min 43.5 sec: FAIL arm-bcm_defconfig ----------------- bcm28155-ap 0 min 44.8 sec: FAIL arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 32.8 sec: PASS exynos5250-arndale 0 min 29.9 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 0 min 31.3 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.7 sec: PASS armada-370-mirabox 0 min 21.3 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 17.3 sec: PASS Console logs for failures ========================= arm-tegra_defconfig ------------------- tegra30-beaver: FAIL: last 40 lines of boot log: ------------------------------------------------ Filename 'buildroot.cpio.gz.uboot'. Load address: 0x82000000 Loading: *############################################ 2.2 MiB/s done Bytes transferred = 642602 (9ce2a hex) Tegra30 (Beaver) # tftp 0x83000000 192.168.1.2:tmp/beaver-bjDo2A/tegra30-beaver.dtb tftp 0x83000000 192.168.1.2:tmp/beaver-bjDo2A/tegra30-beaver.dtb Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.224 Filename 'tmp/beaver-bjDo2A/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: *## 1.9 MiB/s done Bytes transferred = 24197 (5e85 hex) Tegra30 (Beaver) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 debug earlyprintk Tegra30 (Beaver) # bootz 0x81000000 0x82000000 0x83000000 bootz 0x81000000 0x82000000 0x83000000 Kernel image @ 0x81000000 [ 0x000000 - 0x430db8 ] ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83008e84 Starting kernel ... Uncompressing Linux... done, booting the kernel. ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 41.85 seconds. # PYBOOT: Result: FAIL arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- sun7i-a20-cubieboard2: OFFLINE: last 40 lines of boot log: ---------------------------------------------------------- Connected to cubie2 console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(cubie2 console)> hardreset (user:khilman) Reboot cubie2 Reboot: cubie2 ; phidget 3 0 : off, sleep, on 0 sun7i# ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.42 seconds. # PYBOOT: Result: OFFLINE arm-multi_v7_defconfig ---------------------- sun7i-a20-cubieboard2: FAIL: last 40 lines of boot log: ------------------------------------------------------- Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x42000000 192.168.1.2:tmp/cubie2-weZLri/sun7i-a20-cubieboard2.dtb tftp 0x42000000 192.168.1.2:tmp/cubie2-weZLri/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.186 Filename 'tmp/cubie2-weZLri/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: *## 2.5 MiB/s done Bytes transferred = 18501 (4845 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.186:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 sun7i# bootz 0x41000000 0x43000000 0x42000000 bootz 0x41000000 0x43000000 0x42000000 Kernel image @ 0x41000000 [ 0x000000 - 0x47abc0 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Using Device Tree in place at 42000000, end 42007844 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 40.01 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 40 lines of boot log: ------------------------------------------------------ Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x42000000 192.168.1.2:tmp/cubie-JT5LEU/sun4i-a10-cubieboard.dtb tftp 0x42000000 192.168.1.2:tmp/cubie-JT5LEU/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-JT5LEU/sun4i-a10-cubieboard.dtb'. Load address: 0x42000000 Loading: *## 2.1 MiB/s done Bytes transferred = 15184 (3b50 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 sun4i# bootz 0x41008000 0x43000000 0x42000000 bootz 0x41008000 0x43000000 0x42000000 Kernel image @ 0x41008000 [ 0x000000 - 0x47abc0 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 44.63 seconds. # PYBOOT: Result: FAIL arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2: FAIL: last 40 lines of boot log: ------------------------------------------------------- Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x42000000 192.168.1.2:tmp/cubie2-74251m/sun7i-a20-cubieboard2.dtb tftp 0x42000000 192.168.1.2:tmp/cubie2-74251m/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.186 Filename 'tmp/cubie2-74251m/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: *## 2.5 MiB/s done Bytes transferred = 18501 (4845 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.186:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 sun7i#bootz 0x41000000 0x43000000 0x42000000 bootz 0x41000000 0x43000000 0x42000000 Kernel image @ 0x41000000 [ 0x000000 - 0x1c4c10 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Using Device Tree in place at 42000000, end 42007844 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 39.06 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 40 lines of boot log: ------------------------------------------------------ Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x42000000 192.168.1.2:tmp/cubie-UJgaq3/sun4i-a10-cubieboard.dtb tftp 0x42000000 192.168.1.2:tmp/cubie-UJgaq3/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-UJgaq3/sun4i-a10-cubieboard.dtb'. Load address: 0x42000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15184 (3b50 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 sun4i#bootz 0x41008000 0x43000000 0x42000000 bootz 0x41008000 0x43000000 0x42000000 Kernel image @ 0x41008000 [ 0x000000 - 0x1c4c10 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 43.50 seconds. # PYBOOT: Result: FAIL arm-bcm_defconfig ----------------- bcm28155-ap: FAIL: last 40 lines of boot log: --------------------------------------------- finished. total time: 0.417s NE! GET_DESC ->STRING DESC sending 'device-tree' (7 KB)... OKAY [ 0.001s] writing 'device-tree'... downloading of 7575 bytes finished Flashing Raw Image Writing to partition 'device-tree' Writing 'device-tree' OKAY [ 0.013s] finished. total time: 0.014s DONE! GET_DESC ->STRING unknown partition 'initrd' error: cannot determine image filename for 'initrd' DESC GET_DESC ->STRING DEresuming boot... OKAY [ 0.000s] finished. total time: 0.001s SC ['/home/khilman/bin/fastboot.py', 'capri', 'tmp/capri-sarGJq/zImage', 'tmp/capri-sarGJq/bcm28155-ap.dtb', 'None'] /home/khilman/bin/fastboot.py capri tmp/capri-sarGJq/zImage tmp/capri-sarGJq/bcm28155-ap.dtb None TFTP: download kernel (tmp/capri-sarGJq/zImage) to /tmp/kernel-02ZCL7 TFTP: download dtb (tmp/capri-sarGJq/bcm28155-ap.dtb) to /tmp/dtb-zg13Wa Deleting /tmp/kernel-02ZCL7 Deleting /tmp/dtb-zg13Wa MMC read: dev # 0, block # 72320, count 16384 ... 16384 blocks read: OK MMC read: dev # 0, block # 114688, count 32768 ... 32768 blocks read: OK ## Flattened Device Tree blob at 9e000000 Booting using the fdt blob at 0x9e000000 Using Device Tree in place at 9e000000, end 9e004d96 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 44.78 seconds. # PYBOOT: Result: FAIL

10 years, 7 months

next build: 417 warnings 2 failures (next/next-20140515)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: b2fef0d Add linux-next specific files for 20140515 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140515/ Runtime: 42m 38s Passed: 122 Failed: 2 Warnings: 417 Section mismatches: 50 ------------------------------------------------------------------------------- Failed defconfigs: exynos_defconfig lpc32xx_defconfig ------------------------------------------------------------------------------- Errors: exynos_defconfig: arch/arm/boot/dts/exynos5260.dtsi:14:46: fatal error: dt-bindings/clock/exynos5260-clk.h: No such file or directory lpc32xx_defconfig: arch/arm/mach-lpc32xx/phy3250.c:205:2: error: unknown field 'dma_filter' specified in initializer Warnings: 1 arch/arm/mach-exynos/exynos.c:207:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 1 drivers/char/hw_random/timeriomem-rng.c:156:33: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 7 drivers/char/hw_random/atmel-rng.c:75:17: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 10 include/linux/bitops.h:48) [-Wdeprecated-declarations] 12 sound/soc/soc-core.c:1667:3: warning: passing argument 1 of 'of_node_full_name' discards 'const' qualifier from pointer target type [enabled by default] 12 sound/soc/soc-core.c:1682:4: warning: passing argument 1 of 'of_node_full_name' discards 'const' qualifier from pointer target type [enabled by default] 13 include/net/ip.h:211:5: warning: "CONFIG_SYSCTL" is not defined [-Wundef] 25 kernel/events/core.c:7435:35: warning: unused variable 'tmp' [-Wunused-variable] 108 mm/compaction.c:773:15: warning: 'next_free_pfn' may be used uninitialized in this function [-Wmaybe-uninitialized] 111 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 111 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128a8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128b0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128b8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128c0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128c8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128d0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128d8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128e0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128e8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128f0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128f8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x12900): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x1e4): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x1ec): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x1f4): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x1fc): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x204): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x20c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x214): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x21c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x224): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x22c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x234): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x23c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x15c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x164): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x16c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x174): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x17c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x184): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x18c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x194): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x19c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x1a4): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x1ac): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x1b4): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28388): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28390): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28398): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283a0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283a8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283b0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283b8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283c0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283c8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283d0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283d8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283e0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown)

10 years, 7 months

OMAP baseline test results for v3.15-rc5

by Paul Walmsley

Here are some basic OMAP test results for Linux v3.15-rc5. Logs and other details at: http://www.pwsan.com/omap/testlogs/test_v3.15-rc5/20140511121007/ Test summary ------------ Build: uImage+dtb: Pass ( 9/ 9): omap2plus_defconfig_am33xx_only/am335x-bone, omap2plus_defconfig/omap4-panda, omap2plus_defconfig/omap4-panda-es, omap2plus_defconfig/am3517-evm, omap2plus_defconfig/omap2430-sdp, omap2plus_defconfig/omap3-beagle, omap2plus_defconfig/omap3-beagle-xm, omap2plus_defconfig/omap3-evm-37xx, omap2plus_defconfig/omap4-var-som Build: uImage: Pass ( 3/ 3): omap1_defconfig, omap1_defconfig_1510innovator_only, omap1_defconfig_5912osk_only Build: zImage: Pass (14/14): multi_v7_defconfig, omap2plus_defconfig, omap2plus_defconfig_am33xx_only, omap2plus_defconfig_2430sdp_only, omap2plus_defconfig_cpupm, omap2plus_defconfig_no_pm, omap2plus_defconfig_n800_only_a, omap2plus_defconfig_n800_multi_omap2xxx, omap2plus_defconfig_omap2_4_only, omap2plus_defconfig_omap3_4_only, rmk_omap3430_ldp_allnoconfig, rmk_omap3430_ldp_oldconfig, rmk_omap4430_sdp_allnoconfig, rmk_omap4430_sdp_oldconfig Boot to userspace: FAIL ( 1/12): 2430sdp skip ( 3/12): 5912osk, cmt3517, 4460varsomom Pass ( 8/12): 3517evm, 3530es3beagle, 3730beaglexm, 37xxevm, 4430es2panda, 4460pandaes, am335xbone, am335xbonelt PM: chip retention via suspend: skip ( 1/ 7): 4460varsomom FAIL ( 2/ 7): 2430sdp, 4430es2panda Pass ( 4/ 7): 3530es3beagle, 3730beaglexm, 37xxevm, 4460pandaes PM: chip retention via dynamic idle: skip ( 1/ 7): 4460varsomom FAIL ( 6/ 7): 2430sdp, 3530es3beagle, 3730beaglexm, 37xxevm, 4430es2panda, 4460pandaes PM: chip off except CORE via suspend: FAIL ( 1/ 1): 3730beaglexm PM: chip off except CORE via dynamic idle: FAIL ( 1/ 1): 3730beaglexm PM: chip off via suspend: skip ( 1/ 5): 4460varsomom FAIL ( 4/ 5): 3530es3beagle, 37xxevm, 4430es2panda, 4460pandaes PM: chip off via dynamic idle: skip ( 1/ 5): 4460varsomom FAIL ( 4/ 5): 3530es3beagle, 37xxevm, 4430es2panda, 4460pandaes vmlinux object size (delta in bytes from test_v3.15-rc4 (89ca3b881987f5a4be4c5dbaa7f0df12bbdde2fd)): text data bss total kernel +303 +64 0 +367 omap1_defconfig +335 +96 0 +431 omap1_defconfig_1510innovator_only +303 +64 0 +367 omap1_defconfig_5912osk_only +363 +120 0 +483 multi_v7_defconfig +179 +64 -64 +179 omap2plus_defconfig +79 +96 0 +175 omap2plus_defconfig_2430sdp_only +179 +64 -64 +179 omap2plus_defconfig_am33xx_only +175 +64 0 +239 omap2plus_defconfig_am43xx_only +179 +64 -64 +179 omap2plus_defconfig_cpupm +4271 +64 0 +4335 omap2plus_defconfig_dra7xx_only -369 0 -32 -401 omap2plus_defconfig_n800_multi_omap2xxx -305 0 -32 -337 omap2plus_defconfig_n800_only_a +115 +64 -64 +115 omap2plus_defconfig_no_pm +239 +64 -64 +239 omap2plus_defconfig_omap2_4_only +175 +64 -64 +175 omap2plus_defconfig_omap3_4_only +111 +64 0 +175 omap2plus_defconfig_omap5_only -68 0 -68 -136 rmk_omap3430_ldp_allnoconfig +95 0 0 +95 rmk_omap3430_ldp_oldconfig +12 0 -148 -136 rmk_omap4430_sdp_allnoconfig +95 0 0 +95 rmk_omap4430_sdp_oldconfig Boot-time memory difference (delta in bytes from test_v3.15-rc4 (89ca3b881987f5a4be4c5dbaa7f0df12bbdde2fd)) avail rsrvd high freed board kconfig -4k 4k . . 2420n800 omap2plus_defconfig_n800_only_a

10 years, 7 months

next boot: 46 pass, 6 fail (next-20140514)

by Kevin's boot bot

Tree/Branch: next Git describe: next-20140514 Failed boot tests (console logs at the end) =========================================== omap5-uevm: OFFLINE: arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y sun7i-a20-cubieboard2: OFFLINE: arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y sun7i-a20-cubieboard2: FAIL: arm-multi_v7_defconfig sun4i-a10-cubieboard: FAIL: arm-multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: arm-sunxi_defconfig sun4i-a10-cubieboard: FAIL: arm-sunxi_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.4 sec: PASS da850-evm 0 min 15.6 sec: PASS arm-tegra_defconfig ------------------- tegra30-beaver 0 min 17.7 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- armada-xp-openblocks-ax3-4 0 min 25.6 sec: PASS omap5-uevm 0 min 31.4 sec: OFFLINE sun7i-a20-cubieboard2 0 min 31.4 sec: OFFLINE arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 19.0 sec: PASS imx6dl-wandboard,wand-solo 0 min 19.0 sec: PASS imx6q-wandboard 0 min 17.3 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 47.9 sec: PASS am335x-boneblack 0 min 25.8 sec: PASS omap3-beagle-xm 1 min 1.6 sec: PASS legacy,3530beagle 0 min 52.5 sec: PASS (Warnings: 1) omap4-panda 1 min 6.9 sec: PASS omap3-overo-tobi 0 min 22.9 sec: PASS (Warnings: 1) am335x-bone 0 min 27.4 sec: PASS omap3-overo-storm-tobi 0 min 22.2 sec: PASS omap5-uevm 1 min 5.1 sec: PASS omap3-n900 0 min 17.3 sec: PASS (Warnings: 1) legacy,n900 0 min 16.9 sec: PASS (Warnings: 1) omap4-panda-es 1 min 5.8 sec: PASS legacy,3730storm 0 min 23.0 sec: PASS legacy,3530overo 0 min 21.1 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- qcom-apq8074-dragonboard 0 min 16.1 sec: PASS ste-snowball 1 min 21.1 sec: PASS tegra30-beaver 0 min 19.7 sec: PASS am335x-boneblack 0 min 24.0 sec: PASS omap3-beagle-xm 0 min 51.7 sec: PASS sun7i-a20-cubieboard2 0 min 39.6 sec: FAIL armada-370-mirabox 0 min 22.5 sec: PASS omap4-panda 0 min 53.2 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.3 sec: PASS sun4i-a10-cubieboard 0 min 44.4 sec: FAIL bcm28155-ap 0 min 28.1 sec: PASS omap3-overo-tobi 0 min 22.1 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.3 sec: PASS am335x-bone 0 min 26.6 sec: PASS omap3-overo-storm-tobi 0 min 20.8 sec: PASS omap5-uevm 1 min 40.2 sec: PASS omap3-n900 0 min 14.8 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.5 sec: PASS omap4-panda-es 0 min 58.6 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.3 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 38.7 sec: FAIL sun4i-a10-cubieboard 0 min 43.0 sec: FAIL arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.9 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 32.1 sec: PASS exynos5250-arndale 0 min 31.2 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 0 min 33.3 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.9 sec: PASS armada-370-mirabox 0 min 20.7 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 17.2 sec: PASS Console logs for failures ========================= arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- omap5-uevm: OFFLINE: last 40 lines of boot log: ----------------------------------------------- Connected to omap5uevm console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(omap5uevm console)> hardreset (user:khilman) Reboot omap5uevm Reboot: omap5uevm ; phidget 1 2 : ('off', 4, 'on') , sleep 4, found: 002/056 2 ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: OFFLINE sun7i-a20-cubieboard2: OFFLINE: last 40 lines of boot log: ---------------------------------------------------------- Connected to cubie2 console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(cubie2 console)> hardreset (user:khilman) Reboot cubie2 Reboot: cubie2 ; phidget 3 0 : off, sleep, on 0 sun7i# ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: OFFLINE arm-multi_v7_defconfig ---------------------- sun7i-a20-cubieboard2: FAIL: last 40 lines of boot log: ------------------------------------------------------- Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x42000000 192.168.1.2:tmp/cubie2-vRN4XS/sun7i-a20-cubieboard2.dtb tftp 0x42000000 192.168.1.2:tmp/cubie2-vRN4XS/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.186 Filename 'tmp/cubie2-vRN4XS/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: *## 2.2 MiB/s done Bytes transferred = 18501 (4845 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.186:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 sun7i# bootz 0x41000000 0x43000000 0x42000000 bootz 0x41000000 0x43000000 0x42000000 Kernel image @ 0x41000000 [ 0x000000 - 0x47c130 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Using Device Tree in place at 42000000, end 42007844 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 39.62 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 40 lines of boot log: ------------------------------------------------------ Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x42000000 192.168.1.2:tmp/cubie-nuDuy8/sun4i-a10-cubieboard.dtb tftp 0x42000000 192.168.1.2:tmp/cubie-nuDuy8/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-nuDuy8/sun4i-a10-cubieboard.dtb'. Load address: 0x42000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15184 (3b50 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 sun4i# bootz 0x41008000 0x43000000 0x42000000 bootz 0x41008000 0x43000000 0x42000000 Kernel image @ 0x41008000 [ 0x000000 - 0x47c130 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 44.44 seconds. # PYBOOT: Result: FAIL arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2: FAIL: last 40 lines of boot log: ------------------------------------------------------- Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i#tftp 0x42000000 192.168.1.2:tmp/cubie2-x6O6E1/sun7i-a20-cubieboard2.dtb tftp 0x42000000 192.168.1.2:tmp/cubie2-x6O6E1/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.186 Filename 'tmp/cubie2-x6O6E1/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: *## 2.2 MiB/s done Bytes transferred = 18501 (4845 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.186:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 sun7i# bootz 0x41000000 0x43000000 0x42000000 bootz 0x41000000 0x43000000 0x42000000 Kernel image @ 0x41000000 [ 0x000000 - 0x1c4c38 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Using Device Tree in place at 42000000, end 42007844 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 38.73 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 40 lines of boot log: ------------------------------------------------------ Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x42000000 192.168.1.2:tmp/cubie-pTYUsG/sun4i-a10-cubieboard.dtb tftp 0x42000000 192.168.1.2:tmp/cubie-pTYUsG/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-pTYUsG/sun4i-a10-cubieboard.dtb'. Load address: 0x42000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15184 (3b50 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 sun4i# bootz 0x41008000 0x43000000 0x42000000 bootz 0x41008000 0x43000000 0x42000000 Kernel image @ 0x41008000 [ 0x000000 - 0x1c4c38 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 43.05 seconds. # PYBOOT: Result: FAIL

10 years, 7 months

next boot: 26 passed 7 failed (next/next-20140514)

by Olof's autobooter

Failed boards: cubie sunxi_defconfig : FAILED 1:03.09 cubie multi_v7_defconfig : FAILED 1:01.10 cubie2 sunxi_defconfig : FAILED 1:00.85 cubie2 multi_v7_defconfig : FAILED 0:59.52 cubie2 multi_lpae_defconfig : FAILED 0:58.97 panda multi_v7_defconfig : FAILED 1:36.63 snowball multi_v7_defconfig : FAILED 1:07.57 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:14.60 arndale exynos_defconfig : passed 1:10.66 bbb omap2plus_defconfig : passed 1:38.58 bbb multi_v7_defconfig : passed 1:22.28 beaver tegra_defconfig : passed 0:57.97 beaver multi_v7_defconfig : passed 0:49.93 capri bcm_defconfig : passed 0:43.84 capri multi_v7_defconfig : passed 0:44.99 dalmore tegra_defconfig : passed 1:24.39 dalmore multi_v7_defconfig : passed 1:15.54 dalmore multi_lpae_defconfig : passed 1:21.60 hummingboard imx_v6_v7_defconfig : passed 1:17.51 hummingboard multi_v7_defconfig : passed 1:04.95 omap5uevm omap2plus_defconfig : passed 1:06.36 omap5uevm multi_v7_defconfig : passed 1:43.30 omap5uevm multi_lpae_defconfig : passed 1:39.99 panda omap2plus_defconfig : warnings 1:13.97 sama5 sama5_defconfig : passed 1:54.88 seaboard tegra_defconfig : passed 1:02.15 seaboard multi_v7_defconfig : passed 1:12.58 snow exynos_defconfig : passed 1:28.75 snowball u8500_defconfig : passed 2:13.64 trimslice tegra_defconfig : passed 1:02.85 trimslice multi_v7_defconfig : passed 0:57.59 wandboard imx_v6_v7_defconfig : passed 1:02.51 wandboard multi_v7_defconfig : passed 0:58.23 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- sun4i#tftp 0x42000000 next/next-20140514/multi_v7_defconfig/zImage tftp 0x42000000 next/next-20140514/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.139 Filename 'next/next-20140514/multi_v7_defconfig/zImage'. Load address: 0x42000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################## 3 MiB/s done Bytes transferred = 4666320 (4733d0 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x48000000 next/next-20140514/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x48000000 next/next-20140514/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.139 Filename 'next/next-20140514/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x48000000 Loading: *## 2.9 MiB/s done Bytes transferred = 15184 (3b50 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x42000000 - 0x48000000 bootz 0x42000000 - 0x48000000 Kernel image @ 0x42000000 [ 0x000000 - 0x4733d0 ] ## Flattened Device Tree blob at 48000000 Booting using the fdt blob at 0x48000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.139 sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x42000000 next/next-20140514/sunxi_defconfig/zImage tftp 0x42000000 next/next-20140514/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.139 Filename 'next/next-20140514/sunxi_defconfig/zImage'. Load address: 0x42000000 Loading: *################################################################# ############################################################# 2.8 MiB/s done Bytes transferred = 1845720 (1c29d8 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x48000000 next/next-20140514/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x48000000 next/next-20140514/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.139 Filename 'next/next-20140514/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x48000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15184 (3b50 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x42000000 - 0x48000000 bootz 0x42000000 - 0x48000000 Kernel image @ 0x42000000 [ 0x000000 - 0x1c29d8 ] ## Flattened Device Tree blob at 48000000 Booting using the fdt blob at 0x48000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- sun7i# tftp 0x42000000 next/next-20140514/multi_lpae_defconfig/zImage tftp 0x42000000 next/next-20140514/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.117 Filename 'next/next-20140514/multi_lpae_defconfig/zImage'. Load address: 0x42000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ 3.9 MiB/s done Bytes transferred = 4694816 (47a320 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x44000000 next/next-20140514/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x44000000 next/next-20140514/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.117 Filename 'next/next-20140514/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x44000000 Loading: *## 3.5 MiB/s done Bytes transferred = 18501 (4845 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x42000000 - 0x44000000 bootz 0x42000000 - 0x44000000 Kernel image @ 0x42000000 [ 0x000000 - 0x47a320 ] ## Flattened Device Tree blob at 44000000 Booting using the fdt blob at 0x44000000 Loading Device Tree to 40ff8000, end 40fff844 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x42000000 next/next-20140514/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.117 Filename 'next/next-20140514/multi_v7_defconfig/zImage'. Load address: 0x42000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################## 4.4 MiB/s done Bytes transferred = 4666320 (4733d0 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x44000000 next/next-20140514/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x44000000 nenode: cubie2 status: on xt/next-20140514/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.117 Filename 'next/next-20140514/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x44000000 Loading: *## 3.5 MiB/s done Bytes transferred = 18501 (4845 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x42000000 - 0x44000000 bootz 0x42000000 - 0x44000000 Kernel image @ 0x42000000 [ 0x000000 - 0x4733d0 ] ## Flattened Device Tree blob at 44000000 Booting using the fdt blob at 0x44000000 Loading Device Tree to 40ff8000, end 40fff844 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.117 sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x42000000 next/next-20140514/sunxi_defconfig/zImage tftp 0x42000000 next/next-20140514/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.117 Filename 'next/next-20140514/sunxi_defconfig/zImage'. Load address: 0x42000000 Loading: *################################################################# ############################################################# 4.4 MiB/s done Bytes transferred = 1845720 (1c29d8 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x44000000 next/next-20140514/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x44000000 next/next-20140514/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.117 Filename 'next/next-20140514/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x44000000 Loading: *## 3.5 MiB/s done Bytes transferred = 18501 (4845 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x42000000 - 0x44000000 bootz 0x42000000 - 0x44000000 Kernel image @ 0x42000000 [ 0x000000 - 0x1c29d8 ] ## Flattened Device Tree blob at 44000000 Booting using the fdt blob at 0x44000000 Loading Device Tree to 40ff8000, end 40fff844 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.687591] usbhid: USB HID core driver [ 1.695953] TCP: cubic registered [ 1.699462] NET: Registered protocol family 17 [ 1.704315] Key type dns_resolver registered [ 1.709289] Power Management for TI OMAP4+ devices. [ 1.714447] Power Management for TI OMAP4. [ 1.718780] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.726135] ThumbEE CPU extension supported. [ 1.726135] Registering SWP/SWPB emulation handler [ 1.736907] vwl1271: 1800 mV [ 1.741210] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.750946] twl 0-0048: PIH (irq 39) nested IRQs [ 1.756622] twl_rtc rtc.15: Power up reset detected. [ 1.762512] twl_rtc rtc.15: Enabling TWL-RTC [ 1.769592] twl_rtc rtc.15: rtc core: registered rtc.15 as rtc0 [ 1.776428] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.782531] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.788726] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.794799] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.800354] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.805816] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.811309] VDAC: 1800 mV [ 1.811309] VANA: 2100 mV [ 1.818176] VCXIO: 1800 mV [ 1.818176] VUSB: 3300 mV [ 1.825134] V1V8: 1800 mV [ 1.828735] V2V1: 2100 mV [ 1.906188] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.057098] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.064605] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.072052] hub 1-1:1.0: USB hub found [ 2.076232] hub 1-1:1.0: 5 ports detected [ 2.082702] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.090118] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.098083] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.534759] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.731353] smsc95xx v1.0.4 [ 3.075988] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 56:6e:ec:58:c2:c9 ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.112 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-Yo5fuf/tmpvboqfT-uImage tftp 0x01000000 tmp/snowball-Yo5fuf/tmpvboqfT-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.112 Filename 'tmp/snowball-Yo5fuf/tmpvboqfT-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################# done Bytes transferred = 4707629 (47d52d hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4707565 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 7 months

next build: 396 warnings 2 failures (next/next-20140514)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: 80bb35b Add linux-next specific files for 20140514 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140514/ Runtime: 42m 50s Passed: 122 Failed: 2 Warnings: 396 Section mismatches: 50 ------------------------------------------------------------------------------- Failed defconfigs: exynos_defconfig lpc32xx_defconfig ------------------------------------------------------------------------------- Errors: exynos_defconfig: arch/arm/boot/dts/exynos5260.dtsi:14:46: fatal error: dt-bindings/clock/exynos5260-clk.h: No such file or directory lpc32xx_defconfig: arch/arm/mach-lpc32xx/phy3250.c:205:2: error: unknown field 'dma_filter' specified in initializer Warnings: 1 arch/arm/mach-exynos/exynos.c:207:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 10 include/linux/bitops.h:48) [-Wdeprecated-declarations] 12 sound/soc/soc-core.c:1667:3: warning: passing argument 1 of 'of_node_full_name' discards 'const' qualifier from pointer target type [enabled by default] 12 sound/soc/soc-core.c:1682:4: warning: passing argument 1 of 'of_node_full_name' discards 'const' qualifier from pointer target type [enabled by default] 25 kernel/events/core.c:7435:35: warning: unused variable 'tmp' [-Wunused-variable] 108 mm/compaction.c:773:15: warning: 'next_free_pfn' may be used uninitialized in this function [-Wmaybe-uninitialized] 111 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 111 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128a8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128b0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128b8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128c0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128c8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128d0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128d8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128e0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128e8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128f0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128f8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x12900): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x1e4): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x1ec): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x1f4): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x1fc): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x204): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x20c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x214): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x21c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x224): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x22c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x234): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x23c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x15c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x164): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x16c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x174): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x17c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x184): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x18c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x194): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x19c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x1a4): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x1ac): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x1b4): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28388): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28390): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28398): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283a0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283a8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283b0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283b8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283c0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283c8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283d0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283d8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283e0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown)

10 years, 7 months

← Newer
1
...
15
16
17
18
19
20
21
...
30
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports May 2014