Kernel-build-reports May 2014

kernel-build-reports@lists.linaro.org

20 participants
299 discussions

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.10.36 Failed boot tests (console logs at the end) =========================================== imx6dl-wandboard,wand-dual: FAIL: imx_v6_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: imx_v6_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig armada-370-mirabox: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig da850-evm: FAIL: davinci_all_defconfig Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm 0 min 14.9 sec: PASS legacy,da850evm 0 min 13.9 sec: PASS omap2plus_defconfig ------------------- legacy,3730xm 0 min 51.2 sec: PASS omap3-beagle-xm 0 min 57.8 sec: PASS legacy,3530beagle 0 min 41.2 sec: PASS omap4-panda 1 min 5.9 sec: PASS omap3-tobi 0 min 33.8 sec: PASS am335x-bone 0 min 26.5 sec: PASS omap4-panda-es 1 min 8.0 sec: PASS legacy,3730storm 0 min 23.7 sec: PASS legacy,3530overo 0 min 21.2 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.1 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 42.2 sec: FAIL imx6dl-wandboard,wand-solo 0 min 42.3 sec: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 0 min 21.4 sec: PASS armada-370-mirabox 0 min 19.6 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 29.2 sec: PASS multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 21.2 sec: FAIL armada-370-mirabox 0 min 18.6 sec: FAIL sun4i-a10-cubieboard 1 min 45.0 sec: FAIL sama5_defconfig --------------- sama5d35ek 0 min 17.9 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 16.5 sec: PASS da850-evm 0 min 40.8 sec: FAIL Console logs for failures ========================= imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ => version version U-Boot 2013.04-00012-g0b44183 (May 15 2013 - 16:00:22) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.156 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 => if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x18000000 192.168.1.2:tmp/wand-dual-LSxcYU/zImage tftp 0x18000000 192.168.1.2:tmp/wand-dual-LSxcYU/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-LSxcYU/zImage'. Load address: 0x18000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################### 1.5 MiB/s done Bytes transferred = 4207992 (403578 hex) => tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x20000000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x1f000000 192.168.1.2:tmp/wand-dual-LSxcYU/imx6dl-wandboard.dtb tftp 0x1f000000 192.168.1.2:tmp/wand-dual-LSxcYU/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-LSxcYU/imx6dl-wandboard.dtb'. Load address: 0x1f000000 Loading: *## 1.4 MiB/s done Bytes transferred = 18975 (4a1f hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 => bootz 0x18000000 0x20000000 0x1f000000 bootz 0x18000000 0x20000000 0x1f000000 ## Loading init Ramdisk from Legacy Image at 20000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 1f000000 Booting using the fdt blob at 0x1f000000 Using Device Tree in place at 1f000000, end 1f007a1e Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 42.23 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log: ------------------------------------------------------------ => version version U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' =>if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.164 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 => if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x18000000 192.168.1.2:tmp/wand-solo-GXiVoz/zImage tftp 0x18000000 192.168.1.2:tmp/wand-solo-GXiVoz/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-GXiVoz/zImage'. Load address: 0x18000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################### 1.5 MiB/s done Bytes transferred = 4207992 (403578 hex) => tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x20000000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x1f000000 192.168.1.2:tmp/wand-solo-GXiVoz/imx6dl-wandboard.dtb tftp 0x1f000000 192.168.1.2:tmp/wand-solo-GXiVoz/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-GXiVoz/imx6dl-wandboard.dtb'. Load address: 0x1f000000 Loading: *## 1.4 MiB/s done Bytes transferred = 18975 (4a1f hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.164:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 => bootz 0x18000000 0x20000000 0x1f000000 bootz 0x18000000 0x20000000 0x1f000000 ## Loading init Ramdisk from Legacy Image at 20000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 1f000000 Booting using the fdt blob at 0x1f000000 Using Device Tree in place at 1f000000, end 1f007a1e Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 42.34 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Switching to clocksource armada_370_xp_clocksource bounce pool size: 64 pages Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) armada-xp-pinctrl d0018000.pinctrl: registered pinctrl driver ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2> Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 17) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 18) is a 16550A sata_mv d00a0000.sata: slots 32 ports 2 scsi0 : sata_mv scsi1 : sata_mv ata1: SATA max UDMA/133 irq 24 ata2: SATA max UDMA/133 irq 24 usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 Registering SWP/SWPB emulation handler /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) ata1: SATA link down (SStatus 0 SControl F300) ata2: SATA link down (SStatus 0 SControl F300) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.10.36 #1 [<c0013c0c>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14) [<c00114b0>] (show_stack+0x10/0x14) from [<c0276480>] (panic+0xa0/0x1e8) [<c0276480>] (panic+0xa0/0x1e8) from [<c0329110>] (mount_block_root+0x294/0x298) [<c0329110>] (mount_block_root+0x294/0x298) from [<c03292c4>] (prepare_namespace+0x14c/0x184) [<c03292c4>] (prepare_namespace+0x14c/0x184) from [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c02721dc>] (kernel_init+0x8/0x158) [<c02721dc>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) CPU0: stopping CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.36 #1 [<c0013c0c>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14) [<c00114b0>] (show_stack+0x10/0x14) from [<c001238c>] (handle_IPI+0x108/0x130) [<c001238c>] (handle_IPI+0x108/0x130) from [<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8) [<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8) from [<c000dac0>] (__irq_svc+0x40/0x50) Exception stack(0xc0359f70 to 0xc0359fb8) 9f60: c1d5c6d8 00000000 000000ba 000000ba 9f80: c03604a8 c0358000 c036045c c0383c6c c027deb0 c0358000 c0383c6c c0358000 9fa0: 0000001f c0359fb8 c000f070 c004fa8c 60000113 ffffffff [<c000dac0>] (__irq_svc+0x40/0x50) from [<c004fa8c>] (cpu_startup_entry+0xfc/0x140) [<c004fa8c>] (cpu_startup_entry+0xfc/0x140) from [<c0328a3c>] (start_kernel+0x2c4/0x2d0) [<c0328a3c>] (start_kernel+0x2c4/0x2d0) from [<00008074>] (0x8074) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 21.22 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 80 lines of boot log: ---------------------------------------------------- Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket -1, mpidr 0 Setting up static identity map for 0xc027be58 - 0xc027beb0 unable to find compatible sirf rstc node in dtb Brought up 1 CPUs SMP: Total of 1 processors activated (1196.85 BogoMIPS). CPU: All CPU(s) started in SVC mode. pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations unable to find compatible sirf pwrc node in dtb irq: Cannot allocate irq_descs @ IRQ34, assuming pre-allocated irq: Cannot allocate irq_descs @ IRQ70, assuming pre-allocated irq: Cannot allocate irq_descs @ IRQ103, assuming pre-allocated Initializing Coherency fabric Serial: AMBA PL011 UART driver bio: create slab <bio-0> at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Switching to clocksource armada_370_xp_clocksource Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) armada-370-pinctrl d0018000.pinctrl: registered pinctrl driver ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2> Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 17) is a 16550A console [ttyS0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 Registering SWP/SWPB emulation handler /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.36 #1 [<c0013c0c>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14) [<c00114b0>] (show_stack+0x10/0x14) from [<c0276480>] (panic+0xa0/0x1e8) [<c0276480>] (panic+0xa0/0x1e8) from [<c0329110>] (mount_block_root+0x294/0x298) [<c0329110>] (mount_block_root+0x294/0x298) from [<c03292c4>] (prepare_namespace+0x14c/0x184) [<c03292c4>] (prepare_namespace+0x14c/0x184) from [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c02721dc>] (kernel_init+0x8/0x158) [<c02721dc>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 18.61 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) .text : 0xc0008000 - 0xc0327ac0 (3199 kB) .init : 0xc0328000 - 0xc0356780 ( 186 kB) .data : 0xc0358000 - 0xc0383d20 ( 176 kB) .bss : 0xc0383d20 - 0xc03b68ac ( 203 kB) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. NR_IRQS:16 nr_irqs:16 16 sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms Console: colour dummy device 80x30 Calibrating delay loop... 669.28 BogoMIPS (lpj=3346432) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket -1, mpidr 0 Setting up static identity map for 0xc027be58 - 0xc027beb0 unable to find compatible sirf rstc node in dtb Brought up 1 CPUs SMP: Total of 1 processors activated (669.28 BogoMIPS). CPU: All CPU(s) started in SVC mode. pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations unable to find compatible sirf pwrc node in dtb Serial: AMBA PL011 UART driver bio: create slab <bio-0> at 0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 bounce pool size: 64 pages Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2> Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A console [ttyS0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 Registering SWP/SWPB emulation handler /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 104.96 seconds. # PYBOOT: Result: FAIL davinci_all_defconfig --------------------- da850-evm: FAIL: last 80 lines of boot log: ------------------------------------------- Starting SPI Memory Copy... Valid magicnum, 0x55424CBB, found at offset 0x00010000. DONE Jumping to entry point at 0xC1080000. MMC: davinci: 0 SF: Detected M25P64 with page size 256 Bytes, erase size 64 KiB, total 8 MiB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial SF: Detected M25P64 with page size 256 Bytes, erase size 64 KiB, total 8 MiB Net: DaVinci-EMAC Hit any key to stop autoboot: 3 0 U-Boot > U-Boot > version version U-Boot 2014.01-dirty (Feb 27 2014 - 15:12:48) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3 GNU ld (GNU Binutils for Ubuntu) 2.23.52.20130913 U-Boot >setenv bootargs console=ttyS2,115200n8 debug earlyprintk setenv bootargs console=ttyS2,115200n8 debug earlyprintk U-Boot >if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U-Boot > if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U-Boot > setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot > dhcp dhcp BOOTP broadcast 1 DHCP client bound to address 192.168.1.194 U-Boot > setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot > if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot > tftp 0xc0800000 192.168.1.2:tmp/da850evm-xqp607/zImage-dtb-gNhknO tftp 0xc0800000 192.168.1.2:tmp/da850evm-xqp607/zImage-dtb-gNhknO Using DaVinci-EMAC device TFTP from server 192.168.1.2; our IP address is 192.168.1.194 Filename 'tmp/da850evm-xqp607/zImage-dtb-gNhknO'. Load address: 0xc0800000 Loading: *################################################################# ################################################################# ######## 1.7 MiB/s done Bytes transferred = 2023756 (1ee14c hex) U-Boot > tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot Using DaVinci-EMAC device TFTP from server 192.168.1.2; our IP address is 192.168.1.194 Filename 'buildroot.cpio.gz.uboot'. Load address: 0xc0c00000 Loading: *############################################ 1.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot >printenv bootargs printenv bootargs bootargs=console=ttyS2,115200n8 debug earlyprintk U-Boot > bootz 0xc0800000 0xc0c00000 bootz 0xc0800000 0xc0c00000 Kernel image @ 0xc0800000 [ 0x000000 - 0x1ec9f8 ] ## Loading init Ramdisk from Legacy Image at c0c00000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 40.83 seconds. # PYBOOT: Result: FAIL

10 years, 7 months

queue boot: 33 passed 0 failed (queue/v3.14.4)

by Olof's autobooter

Failed boards: Successful boards: apc vt8500_v6_v7_defconfig : passed 1:23.29 arndale exynos_defconfig : passed 1:10.13 bbb omap2plus_defconfig : passed 1:39.19 bbb multi_v7_defconfig : passed 1:23.97 beaver tegra_defconfig : passed 0:54.32 beaver multi_v7_defconfig : passed 0:48.21 capri bcm_defconfig : passed 0:44.47 capri multi_v7_defconfig : passed 0:44.13 cubie sunxi_defconfig : passed 1:04.29 cubie multi_v7_defconfig : passed 0:58.23 cubie2 sunxi_defconfig : passed 1:06.17 cubie2 multi_v7_defconfig : passed 1:05.18 cubie2 multi_lpae_defconfig : passed 0:58.12 cubox dove_defconfig : passed 0:57.68 dalmore tegra_defconfig : passed 1:22.90 dalmore multi_v7_defconfig : passed 1:16.46 dalmore multi_lpae_defconfig : passed 1:22.33 hummingboard imx_v6_v7_defconfig : passed 1:26.41 hummingboard multi_v7_defconfig : passed 1:03.51 omap5uevm multi_v7_defconfig : warnings 1:40.34 omap5uevm multi_lpae_defconfig : warnings 1:34.72 panda omap2plus_defconfig : passed 1:14.98 panda multi_v7_defconfig : passed 1:41.43 sama5 sama5_defconfig : passed 1:54.73 seaboard tegra_defconfig : passed 1:04.04 seaboard multi_v7_defconfig : passed 1:09.42 snow exynos_defconfig : passed 1:22.52 snowball u8500_defconfig : passed 2:16.83 snowball multi_v7_defconfig : passed 4:01.05 trimslice tegra_defconfig : passed 0:53.78 trimslice multi_v7_defconfig : passed 1:07.62 wandboard imx_v6_v7_defconfig : passed 1:01.54 wandboard multi_v7_defconfig : passed 1:08.85 Offline boards: omap5uevm omap2plus_defconfig : OFFLINE 2:10.34 Board legend is available at http://arm-soc.lixom.net/boards.html

10 years, 7 months

queue build: 7 warnings 0 failures (queue/v3.14.4)

by Olof's autobuilder

10 years, 7 months

stable boot: 18 pass, 0 fail (v3.10.40)

by Kevin's boot bot

Tree/Branch: stable Git describe: v3.10.40 Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 16.6 sec: PASS arm-tegra_defconfig ------------------- tegra30-beaver 0 min 17.3 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 51.9 sec: PASS omap3-beagle-xm 1 min 1.3 sec: PASS legacy,3530beagle 0 min 38.3 sec: PASS omap4-panda 1 min 8.3 sec: PASS omap3-tobi 0 min 34.1 sec: PASS am335x-bone 0 min 26.5 sec: PASS legacy,n900 0 min 16.3 sec: PASS omap4-panda-es 1 min 9.3 sec: PASS legacy,3730storm 0 min 23.8 sec: PASS legacy,3530overo 0 min 21.2 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 17.5 sec: PASS imx6dl-wandboard,wand-solo 0 min 17.3 sec: PASS arm-exynos_defconfig -------------------- exynos5250-arndale 0 min 30.5 sec: PASS arm-da8xx_omapl_defconfig ------------------------- da850-evm 0 min 15.0 sec: PASS legacy,da850evm 0 min 14.0 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 51.5 sec: PASS

10 years, 7 months

next boot: 13 pass, 39 fail (next-20140513)

by Kevin's boot bot

Tree/Branch: next Git describe: next-20140513 Failed boot tests (console logs at the end) =========================================== tegra30-beaver: FAIL: arm-tegra_defconfig armada-xp-openblocks-ax3-4: FAIL: arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y omap5-uevm: FAIL: arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y sun7i-a20-cubieboard2: FAIL: arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y imx6dl-wandboard,wand-dual: FAIL: arm-imx_v6_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: arm-imx_v6_v7_defconfig imx6q-wandboard: FAIL: arm-imx_v6_v7_defconfig am335x-boneblack: FAIL: arm-omap2plus_defconfig omap3-beagle-xm: FAIL: arm-omap2plus_defconfig omap4-panda: FAIL: arm-omap2plus_defconfig omap3-overo-tobi: FAIL: arm-omap2plus_defconfig omap3-overo-storm-tobi: FAIL: arm-omap2plus_defconfig omap5-uevm: FAIL: arm-omap2plus_defconfig omap3-n900: FAIL: arm-omap2plus_defconfig omap4-panda-es: FAIL: arm-omap2plus_defconfig tegra30-beaver: FAIL: arm-multi_v7_defconfig am335x-boneblack: FAIL: arm-multi_v7_defconfig omap3-beagle-xm: FAIL: arm-multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: arm-multi_v7_defconfig armada-370-mirabox: FAIL: arm-multi_v7_defconfig omap4-panda: FAIL: arm-multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: arm-multi_v7_defconfig sun4i-a10-cubieboard: FAIL: arm-multi_v7_defconfig bcm28155-ap: FAIL: arm-multi_v7_defconfig omap3-overo-tobi: FAIL: arm-multi_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: arm-multi_v7_defconfig omap3-overo-storm-tobi: FAIL: arm-multi_v7_defconfig omap5-uevm: FAIL: arm-multi_v7_defconfig omap3-n900: FAIL: arm-multi_v7_defconfig imx6q-wandboard: FAIL: arm-multi_v7_defconfig omap4-panda-es: FAIL: arm-multi_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: arm-multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: arm-sunxi_defconfig sun4i-a10-cubieboard: FAIL: arm-sunxi_defconfig bcm28155-ap: FAIL: arm-bcm_defconfig exynos5250-arndale: FAIL: arm-exynos_defconfig armada-xp-openblocks-ax3-4: FAIL: arm-mvebu_v7_defconfig armada-370-mirabox: FAIL: arm-mvebu_v7_defconfig sama5d35ek: FAIL: arm-sama5_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.4 sec: PASS da850-evm 0 min 15.6 sec: PASS arm-tegra_defconfig ------------------- tegra30-beaver 1 min 42.0 sec: FAIL arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- armada-xp-openblocks-ax3-4 0 min 50.6 sec: FAIL omap5-uevm 1 min 20.2 sec: FAIL sun7i-a20-cubieboard2 0 min 40.0 sec: FAIL arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 42.8 sec: FAIL imx6dl-wandboard,wand-solo 0 min 43.1 sec: FAIL imx6q-wandboard 0 min 41.1 sec: FAIL arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 49.2 sec: PASS am335x-boneblack 1 min 48.8 sec: FAIL omap3-beagle-xm 1 min 15.9 sec: FAIL legacy,3530beagle 0 min 36.3 sec: PASS (Warnings: 1) omap4-panda 1 min 20.6 sec: FAIL omap3-overo-tobi 0 min 48.1 sec: FAIL am335x-bone 0 min 35.8 sec: PASS omap3-overo-storm-tobi 0 min 46.2 sec: FAIL omap5-uevm 1 min 16.5 sec: FAIL omap3-n900 0 min 33.5 sec: FAIL legacy,n900 0 min 16.9 sec: PASS (Warnings: 1) omap4-panda-es 1 min 19.8 sec: FAIL legacy,3730storm 0 min 23.0 sec: PASS legacy,3530overo 0 min 21.0 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- qcom-apq8074-dragonboard 0 min 16.2 sec: PASS ste-snowball 1 min 32.7 sec: PASS tegra30-beaver 0 min 41.9 sec: FAIL am335x-boneblack 1 min 49.1 sec: FAIL omap3-beagle-xm 1 min 20.5 sec: FAIL sun7i-a20-cubieboard2 0 min 39.9 sec: FAIL armada-370-mirabox 0 min 49.5 sec: FAIL omap4-panda 1 min 22.9 sec: FAIL armada-xp-openblocks-ax3-4 0 min 51.7 sec: FAIL sun4i-a10-cubieboard 0 min 44.7 sec: FAIL bcm28155-ap 1 min 52.8 sec: FAIL omap3-overo-tobi 0 min 48.1 sec: FAIL imx6dl-wandboard,wand-solo 0 min 42.7 sec: FAIL am335x-bone 0 min 35.6 sec: PASS omap3-overo-storm-tobi 0 min 49.0 sec: FAIL omap5-uevm 1 min 18.8 sec: FAIL omap3-n900 0 min 33.5 sec: FAIL imx6q-wandboard 0 min 41.0 sec: FAIL omap4-panda-es 1 min 22.4 sec: FAIL imx6dl-wandboard,wand-dual 0 min 42.5 sec: FAIL arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 39.0 sec: FAIL sun4i-a10-cubieboard 0 min 43.5 sec: FAIL arm-bcm_defconfig ----------------- bcm28155-ap 1 min 49.9 sec: FAIL arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 31.6 sec: PASS exynos5250-arndale 1 min 55.7 sec: FAIL arm-u8500_defconfig ------------------- ste-snowball 0 min 46.8 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 49.5 sec: FAIL armada-370-mirabox 0 min 48.3 sec: FAIL arm-sama5_defconfig ------------------- sama5d35ek 1 min 2.7 sec: FAIL Console logs for failures ========================= arm-tegra_defconfig ------------------- tegra30-beaver: FAIL: last 40 lines of boot log: ------------------------------------------------ [ 0.895342] usbcore: registered new interface driver smsc75xx [ 0.901135] usbcore: registered new interface driver smsc95xx [ 0.906938] usbcore: registered new interface driver net1080 [ 0.912649] usbcore: registered new interface driver cdc_subset [ 0.918602] usbcore: registered new interface driver zaurus [ 0.924295] usbcore: registered new interface driver cdc_ncm [ 0.929897] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.936451] ehci-pci: EHCI PCI platform driver [ 0.941048] tegra-ehci: Tegra EHCI driver [ 0.945408] usbcore: registered new interface driver cdc_acm [ 0.950734] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 0.958914] usbcore: registered new interface driver cdc_wdm [ 0.964668] usbcore: registered new interface driver usb-storage [ 0.971266] mousedev: PS/2 mouse device common for all mice [ 0.978002] usbcore: registered new interface driver uvcvideo [ 0.982035] USB Video Class driver (1.1.1) [ 0.986187] gspca_main: v2.14.0 registered [ 0.990940] sdhci: Secure Digital Host Controller Interface driver [ 0.996612] sdhci: Copyright(c) Pierre Ossman [ 1.001008] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.007459] usbcore: registered new interface driver usbhid [ 1.012372] usbhid: USB HID core driver [ 1.019658] TCP: cubic registered [ 1.021397] NET: Registered protocol family 10 [ 1.026859] mip6: Mobile IPv6 [ 1.028690] sit: IPv6 over IPv4 tunneling driver [ 1.035689] NET: Registered protocol family 17 [ 1.038347] NET: Registered protocol family 15 [ 1.042922] Bluetooth: RFCOMM socket layer initialized [ 1.048025] Bluetooth: RFCOMM ver 1.11 [ 1.051856] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.057207] Bluetooth: BNEP socket layer initialized [ 1.062242] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.068213] Bluetooth: HIDP socket layer initialized [ 1.074319] Registering SWP/SWPB emulation handler [ 1.078817] bootconsole [earlycon0] disabled ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 102.02 seconds. # PYBOOT: Result: FAIL arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- armada-xp-openblocks-ax3-4: FAIL: last 40 lines of boot log: ------------------------------------------------------------ Bytes transferred = 4739550 (4851de hex) openblocks> tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.158 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x3000000 Loading: *############################################ done Bytes transferred = 642602 (9ce2a hex) openblocks> printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk openblocks>bootm 0x02000000 0x03000000 bootm 0x02000000 0x03000000 ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux Created: 2014-05-13 10:07:19 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4739486 Bytes = 4.5 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 50.64 seconds. # PYBOOT: Result: FAIL omap5-uevm: FAIL: last 40 lines of boot log: -------------------------------------------- Load address: 0x82000000 Loading: *T ############################################ 94.7 KiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x81f00000 192.168.1.2:tmp/omap5uevm-haDix_/omap5-uevm.dtb tftp 0x81f00000 192.168.1.2:tmp/omap5uevm-haDix_/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.201 Filename 'tmp/omap5uevm-haDix_/omap5-uevm.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x8008d80 T #### 4.9 KiB/s done Bytes transferred = 45220 (b0a4 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.201:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 U-Boot# bootz 0x81000000 0x82000000 0x81f00000 bootz 0x81000000 0x82000000 0x81f00000 Kernel image @ 0x81000000 [ 0x000000 - 0x481640 ] ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0e0a3 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 80.22 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 40 lines of boot log: ------------------------------------------------------- Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x42000000 192.168.1.2:tmp/cubie2-ONaxrZ/sun7i-a20-cubieboard2.dtb tftp 0x42000000 192.168.1.2:tmp/cubie2-ONaxrZ/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.186 Filename 'tmp/cubie2-ONaxrZ/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: *## 2.5 MiB/s done Bytes transferred = 18501 (4845 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.186:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 sun7i# bootz 0x41000000 0x43000000 0x42000000 bootz 0x41000000 0x43000000 0x42000000 Kernel image @ 0x41000000 [ 0x000000 - 0x481640 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Using Device Tree in place at 42000000, end 42007844 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 39.96 seconds. # PYBOOT: Result: FAIL arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual: FAIL: last 40 lines of boot log: ------------------------------------------------------------ tftp 0x13000000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x13000000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x12000000 192.168.1.2:tmp/wand-dual-UmhxEH/imx6dl-wandboard.dtb tftp 0x12000000 192.168.1.2:tmp/wand-dual-UmhxEH/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-UmhxEH/imx6dl-wandboard.dtb'. Load address: 0x12000000 Loading: *## 1.5 MiB/s done Bytes transferred = 26881 (6901 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 => bootz 0x11000000 0x13000000 0x12000000 bootz 0x11000000 0x13000000 0x12000000 ## Loading init Ramdisk from Legacy Image at 13000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 12000000 Booting using the fdt blob at 0x12000000 Using Device Tree in place at 12000000, end 12009900 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 42.76 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 40 lines of boot log: ------------------------------------------------------------ tftp 0x13000000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x13000000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) =>tftp 0x12000000 192.168.1.2:tmp/wand-solo-6yvny9/imx6dl-wandboard.dtb tftp 0x12000000 192.168.1.2:tmp/wand-solo-6yvny9/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-6yvny9/imx6dl-wandboard.dtb'. Load address: 0x12000000 Loading: *## 1.3 MiB/s done Bytes transferred = 26881 (6901 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.164:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 => bootz 0x11000000 0x13000000 0x12000000 bootz 0x11000000 0x13000000 0x12000000 ## Loading init Ramdisk from Legacy Image at 13000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 12000000 Booting using the fdt blob at 0x12000000 Using Device Tree in place at 12000000, end 12009900 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 43.09 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: FAIL: last 40 lines of boot log: ------------------------------------------------- TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x13000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x12000000 192.168.1.2:tmp/wand-quad-JSQ6PF/imx6q-wandboard.dtb tftp 0x12000000 192.168.1.2:tmp/wand-quad-JSQ6PF/imx6q-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'tmp/wand-quad-JSQ6PF/imx6q-wandboard.dtb'. Load address: 0x12000000 Loading: *### 2.6 MiB/s done Bytes transferred = 29638 (73c6 hex) =>printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0:::none:192.168.1.254 => bootz 0x11000000 0x13000000 0x12000000 bootz 0x11000000 0x13000000 0x12000000 Kernel image @ 0x11000000 [ 0x000000 - 0x505d98 ] ## Loading init Ramdisk from Legacy Image at 13000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 12000000 Booting using the fdt blob at 0x12000000 Using Device Tree in place at 12000000, end 1200a3c5 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 41.07 seconds. # PYBOOT: Result: FAIL arm-omap2plus_defconfig ----------------------- am335x-boneblack: FAIL: last 40 lines of boot log: -------------------------------------------------- [ 0.781645] io scheduler cfq registered (default) [ 0.784489] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.787966] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.797760] omap_uart 44e09000.serial: no wakeirq for uart0 [ 0.798595] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 1.444794] console [ttyO0] enabled [ 1.491849] brd: module loaded [ 1.520527] loop: module loaded [ 1.528121] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.538876] usbcore: registered new interface driver asix [ 1.544802] usbcore: registered new interface driver ax88179_178a [ 1.551495] usbcore: registered new interface driver cdc_ether [ 1.557972] usbcore: registered new interface driver smsc95xx [ 1.564218] usbcore: registered new interface driver net1080 [ 1.570448] usbcore: registered new interface driver cdc_subset [ 1.576870] usbcore: registered new interface driver zaurus [ 1.583143] usbcore: registered new interface driver cdc_ncm [ 1.591431] usbcore: registered new interface driver cdc_wdm [ 1.597841] usbcore: registered new interface driver usb-storage [ 1.604455] usbcore: registered new interface driver usbtest [ 1.619429] mousedev: PS/2 mouse device common for all mice [ 1.630558] i2c /dev entries driver [ 1.634376] Driver for 1-wire Dallas network protocol. [ 1.642434] ledtrig-cpu: registered to indicate activity on CPUs [ 1.649724] usbcore: registered new interface driver usbhid [ 1.655576] usbhid: USB HID core driver [ 1.661061] oprofile: using arm/armv7 [ 1.665826] TCP: cubic registered [ 1.669497] Initializing XFRM netlink socket [ 1.674184] NET: Registered protocol family 17 [ 1.679044] NET: Registered protocol family 15 [ 1.684203] Key type dns_resolver registered [ 1.690682] ThumbEE CPU extension supported. [ 1.695247] Registering SWP/SWPB emulation handler [ 1.710228] /home/buildslave/workspace/khilman-kbuilder/next/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 13.871927] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 108.77 seconds. # PYBOOT: Result: FAIL omap3-beagle-xm: FAIL: last 40 lines of boot log: ------------------------------------------------- TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x82000000 Loading: *T ############################################ 110.4 KiB/s done Bytes transferred = 642602 (9ce2a hex) OMAP3 beagleboard.org # tftp 0x81f00000 192.168.1.2:tmp/3730xm-OWGQ7j/omap3-beagle-xm.dtb tftp 0x81f00000 192.168.1.2:tmp/3730xm-OWGQ7j/omap3-beagle-xm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-OWGQ7j/omap3-beagle-xm.dtb'. Load address: 0x81f00000 Loading: *T ##### 7.8 KiB/s done Bytes transferred = 60981 (ee35 hex) OMAP3 beagleboard.org #printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk ip=192.168.1.190:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 OMAP3 beagleboard.org # bootz 0x80200000 0x82000000 0x81f00000 bootz 0x80200000 0x82000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffffdea ... OK Loading Device Tree to 8ff51000, end 8ff62e34 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 75.87 seconds. # PYBOOT: Result: FAIL omap4-panda: FAIL: last 40 lines of boot log: --------------------------------------------- TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ############################################ 82 KiB/s done Bytes transferred = 642602 (9ce2a hex) Panda # tftp 0x81f00000 192.168.1.2:tmp/4430panda-AEWMfM/omap4-panda.dtb tftp 0x81f00000 192.168.1.2:tmp/4430panda-AEWMfM/omap4-panda.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'tmp/4430panda-AEWMfM/omap4-panda.dtb'. Load address: 0x81f00000 Loading: *T #### 5.9 KiB/s done Bytes transferred = 54887 (d667 hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 Panda # bootz 0x81000000 0x82000000 0x81f00000 bootz 0x81000000 0x82000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f10666 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 80.60 seconds. # PYBOOT: Result: FAIL omap3-overo-tobi: FAIL: last 40 lines of boot log: -------------------------------------------------- Load address: 0x82000000 Loading: *############################################ 2.4 MiB/s done Bytes transferred = 642602 (9ce2a hex) Overo # tftp 0x81f00000 192.168.1.2:tmp/3530overo-PvsMj2/omap3-overo-tobi.dtb tftp 0x81f00000 192.168.1.2:tmp/3530overo-PvsMj2/omap3-overo-tobi.dtb smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'tmp/3530overo-PvsMj2/omap3-overo-tobi.dtb'. Load address: 0x81f00000 Loading: *##### 2.3 MiB/s done Bytes transferred = 62205 (f2fd hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk debug ip=192.168.1.155:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 Overo # bootz 0x80200000 0x82000000 0x81f00000 bootz 0x80200000 0x82000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffffdea ... OK Loading Device Tree to 8ff50000, end 8ff622fc ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 48.15 seconds. # PYBOOT: Result: FAIL omap3-overo-storm-tobi: FAIL: last 40 lines of boot log: -------------------------------------------------------- Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.195 Filename 'tmp/3730storm-U6QxGu/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################### 2.4 MiB/s done Bytes transferred = 4319792 (41ea30 hex) Overo # tftp 0x81f00000 192.168.1.2:tmp/3730storm-U6QxGu/omap3-overo-storm-tobi.dtb tftp 0x81f00000 192.168.1.2:tmp/3730storm-U6QxGu/omap3-overo-storm-tobi.dtb smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.195 Filename 'tmp/3730storm-U6QxGu/omap3-overo-storm-tobi.dtb'. Load address: 0x81f00000 Loading: *##### 2.3 MiB/s done Bytes transferred = 63065 (f659 hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.195:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 Overo # bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8ffed000, end 8ffff658 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 46.25 seconds. # PYBOOT: Result: FAIL omap5-uevm: FAIL: last 40 lines of boot log: -------------------------------------------- Load address: 0x82000000 Loading: *T ############################################ 91.8 KiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x81f00000 192.168.1.2:tmp/omap5uevm-43SHMQ/omap5-uevm.dtb tftp 0x81f00000 192.168.1.2:tmp/omap5uevm-43SHMQ/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.201 Filename 'tmp/omap5uevm-43SHMQ/omap5-uevm.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x8008d80 T #### 4.9 KiB/s done Bytes transferred = 45220 (b0a4 hex) U-Boot#printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.201:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 U-Boot# bootz 0x81000000 0x82000000 0x81f00000 bootz 0x81000000 0x82000000 0x81f00000 Kernel image @ 0x81000000 [ 0x000000 - 0x41ea30 ] ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0e0a3 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 76.54 seconds. # PYBOOT: Result: FAIL omap3-n900: FAIL: last 40 lines of boot log: -------------------------------------------- [ 0.866] SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 04, index 0409, length 255 bytes) [ 0.876] SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 04, index 0409, length 255 bytes) [ 0.886] SETUP: WR STD INTERFACE SET_INTERFACE value 0000 index 0002 length 0000 [ 0.895] SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 04, index 0409, length 255 bytes) [ 1.244] SETUP: WR STD INTERFACE SET_INTERFACE value 0001 index 0002 length 0000 [ 1.252] Flashing interface selected [ 1.256] SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 04, index 0409, length 255 bytes) [ 1.266] SETUP: RD VND DEVICE req 01 value 0000 index 0000 length 0004 [ 1.274] Flashing mode entered [ 1.277] SETUP: RD VND DEVICE req 01 value 0000 index 0000 length 0004 [ 1.284] SETUP: RD VND DEVICE req 04 value 0000 index 0000 length 0200 [ 1.292] SETUP: RD VND DEVICE req 03 value 0000 index 0000 length 0004 [ 1.300] SETUP: WR VND DEVICE req 12 value 0000 index 0000 length 0012 [ 1.307] SETUP: RD VND DEVICE req 14 value 0000 index 0000 length 0200 [ 1.315] SETUP: WR VND DEVICE req 42 value 0000 index 0000 length 002d [ 1.322] Image 'kernel' won't fit to the partition, still loading it (4384000 bytes, while maximum is 2097152 bytes) [ 1.333] Receiving kernel (length 4384000) USB device found found at bus 002, device address 118. NOLO version 1.4.10 Version of 'sw-release': <no version> Found device RX-51, hardware revision 0010 Sending kernel image (4281 kB)... 2% (128 of 4281 kB, 4740 kB/s) 5% (256 of 4281 kB, 6564 kB/s) 8% (384 of 4281 kB, 7529 kB/s) 11% (512 of 4281 kB, 8000 kB/s) 14% (640 of 4281 kB, 8421 kB/s) 17% (768 of 4281 kB, 8727 kB/s) 20% (896 of 4281 kB, 8871 kB/s) 23% (1024 of 4281 kB, 9061 kB/s) 26% (1152 of 4281 kB, 9216 kB/s) 29% (1280 of 4281 kB, 9275 kB/s) 32% (1408 of 4281 kB, 9386 kB/s) 35% (1536 of 4281 kB, 9481 kB/s) 38% (1664 of 4281 kB, 9563 kB/s) 41% (1792 of 4281 kB, 9582 kB/s) 44% (1920 of 4281 kB, 9458 kB/s) 47% (2048 of 4281 kB, 9525 kB/s) 50% (2176 of 4281 kB, 9585 kB/s) 53% (2304 of 4281 kB, 9600 kB/s) 56% (2432 of 4281 kB, 9650 kB/s) 59% (2560 of 4281 kB, 9696 kB/s) 62% (2688 of 4281 kB, 9703 kB/s) 65% (2816 of 4281 kB, 9743 kB/s) 68% (2944 of 4281 kB, 9780 kB/s) 71% (3072 of 4281 kB, 9783 kB/s) 74% (3200 of 4281 kB, 9815 kB/s) 77% (3328 of 4281 kB, 9846 kB/s) 80% (3456 of 4281 kB, 9874 kB/s) 83% (3584 of 4281 kB, 9900 kB/s) 86% (3712 of 4281 kB, 9898 kB/s) 89% (3840 of 4281 kB, 9922 kB/s) 92% (3968 of 4281 kB, 9797 kB/s) 95% (4096 of 4281 kB, 9822 kB/s) 98% (4224 of 4281 kB, 9823 kB/s)100% (4281 of 4281 kB, avg. 9841 kB/s) [ 1.758] Image successfully received [ 1.858] SETUP: WR VND DEVICE req 82 value 0000 index 0000 length 0055 [ 1.866] SETUP: WR STD INTERFACE SET_

10 years, 7 months

queue boot: 9 passed 1 failed (queue/v3.10.40)

by Olof's autobooter

Failed boards: cubie multi_v7_defconfig : FAILED 0:24.04 Successful boards: arndale exynos_defconfig : passed 1:03.33 beaver tegra_defconfig : passed 0:45.08 cubox dove_defconfig : passed 0:58.68 dalmore tegra_defconfig : passed 1:05.09 panda omap2plus_defconfig : passed 1:13.02 sama5 sama5_defconfig : passed 2:01.44 seaboard tegra_defconfig : passed 0:59.45 snow exynos_defconfig : passed 1:20.99 trimslice tegra_defconfig : passed 0:56.07 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A console [ttyS0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 Registering SWP/SWPB emulation handler /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,255) CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.40 #1 [<c0013c0c>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14) [<c00114b0>] (show_stack+0x10/0x14) from [<c0276500>] (panic+0xa0/0x1e8) [<c0276500>] (panic+0xa0/0x1e8) from [<c0329110>] (mount_block_root+0x294/0x298) [<c0329110>] (mount_block_root+0x294/0x298) from [<c03292c4>] (prepare_namespace+0x14c/0x184) [<c03292c4>] (prepare_namespace+0x14c/0x184) from [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c0272260>] (kernel_init+0x8/0x158) [<c0272260>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) ~$off # PYBOOT: Exception: panic

10 years, 7 months

queue build: 23 warnings 0 failures (queue/v3.10.40)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: be67db1 Linux 3.10.40 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.10.40/ Runtime: 32m 20s Passed: 121 Failed: 0 Warnings: 23 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 arch/arm/mach-pxa/em-x270.c:480:18: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 arch/arm/mach-pxa/em-x270.c:484:18: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 arch/arm/mach-pxa/em-x270.c:603:19: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 drivers/gpio/gpio-omap.c:1529:13: warning: 'omap_gpio_init_context' defined but not used [-Wunused-function] 1 drivers/spi/spi-pl022.c:2226:9: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 drivers/video/backlight/max8925_bl.c:124:41: warning: statement with no effect [-Wunused-value] 1 include/linux/clocksource.h:345:20: warning: comparison of distinct pointer types lacks a cast [enabled by default] 4 arch/arm/mm/init.c:603:2: warning: passing argument 1 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:603:2: warning: passing argument 2 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:731:2: warning: passing argument 1 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:731:2: warning: passing argument 2 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] Section mismatches:

10 years, 7 months

stable boot: 18 pass, 1 fail (v3.10.40)

by Kevin's boot bot

Tree/Branch: stable Git describe: v3.10.40 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 16.6 sec: PASS arm-tegra_defconfig ------------------- tegra30-beaver 0 min 17.3 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- armada-xp-openblocks-ax3-4 0 min 19.9 sec: FAIL arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 17.5 sec: PASS imx6dl-wandboard,wand-solo 0 min 17.3 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 51.9 sec: PASS omap3-beagle-xm 1 min 1.3 sec: PASS legacy,3530beagle 0 min 38.3 sec: PASS omap4-panda 1 min 8.3 sec: PASS omap3-tobi 0 min 34.1 sec: PASS am335x-bone 0 min 26.5 sec: PASS legacy,n900 0 min 16.3 sec: PASS omap4-panda-es 1 min 9.3 sec: PASS legacy,3730storm 0 min 23.8 sec: PASS legacy,3530overo 0 min 21.2 sec: PASS arm-exynos_defconfig -------------------- exynos5250-arndale 0 min 30.5 sec: PASS arm-da8xx_omapl_defconfig ------------------------- da850-evm 0 min 15.0 sec: PASS legacy,da850evm 0 min 14.0 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 51.5 sec: PASS Console logs for failures ========================= arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- armada-xp-openblocks-ax3-4: FAIL: last 40 lines of boot log: ------------------------------------------------------------ usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 Registering SWP/SWPB emulation handler /home/buildslave/workspace/khilman-kbuilder/stable/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) ata1: SATA link down (SStatus 0 SControl F300) ata2: SATA link down (SStatus 0 SControl F300) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.10.40 #1 [<c0013c48>] (unwind_backtrace+0x0/0xf8) from [<c00115f4>] (show_stack+0x10/0x14) [<c00115f4>] (show_stack+0x10/0x14) from [<c0270fd8>] (panic+0x90/0x1e8) [<c0270fd8>] (panic+0x90/0x1e8) from [<c03280ac>] (mount_block_root+0x254/0x29c) [<c03280ac>] (mount_block_root+0x254/0x29c) from [<c0328278>] (prepare_namespace+0x120/0x174) [<c0328278>] (prepare_namespace+0x120/0x174) from [<c0327d04>] (kernel_init_freeable+0x180/0x1c8) [<c0327d04>] (kernel_init_freeable+0x180/0x1c8) from [<c026d2b8>] (kernel_init+0x8/0xe4) [<c026d2b8>] (kernel_init+0x8/0xe4) from [<c000e118>] (ret_from_fork+0x14/0x3c) CPU0: stopping CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.40 #1 [<c0013c48>] (unwind_backtrace+0x0/0xf8) from [<c00115f4>] (show_stack+0x10/0x14) [<c00115f4>] (show_stack+0x10/0x14) from [<c0012450>] (handle_IPI+0xfc/0x130) [<c0012450>] (handle_IPI+0xfc/0x130) from [<c000852c>] (armada_370_xp_handle_irq+0x8c/0xac) [<c000852c>] (armada_370_xp_handle_irq+0x8c/0xac) from [<c000dcc0>] (__irq_svc+0x40/0x50) Exception stack(0xc0357f80 to 0xc0357fc8) 7f80: c1d5f6d8 00000000 000000c2 000000c2 c0356000 c035e4a8 c035e45c c0381eec 7fa0: 00000001 c0278f0c c0381eec 00000000 0000001f c0357fc8 c000f254 c004ee34 7fc0: 60000113 ffffffff [<c000dcc0>] (__irq_svc+0x40/0x50) from [<c004ee34>] (cpu_startup_entry+0x60/0x130) [<c004ee34>] (cpu_startup_entry+0x60/0x130) from [<c03279ec>] (start_kernel+0x27c/0x2c4) [<c03279ec>] (start_kernel+0x27c/0x2c4) from [<00008084>] (0x8084) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 19.91 seconds. # PYBOOT: Result: FAIL

10 years, 7 months

next boot: 2 passed 31 failed (next/next-20140513)

by Olof's autobooter

Failed boards: arndale exynos_defconfig : FAILED 1:47.01 bbb omap2plus_defconfig : FAILED 1:36.76 bbb multi_v7_defconfig : FAILED 1:38.42 beaver tegra_defconfig : FAILED 1:24.33 beaver multi_v7_defconfig : FAILED 1:01.47 capri bcm_defconfig : FAILED 1:25.67 capri multi_v7_defconfig : FAILED 1:26.16 cubie sunxi_defconfig : FAILED 1:02.72 cubie multi_v7_defconfig : FAILED 1:01.13 cubie2 sunxi_defconfig : FAILED 1:00.62 cubie2 multi_v7_defconfig : FAILED 0:59.77 cubie2 multi_lpae_defconfig : FAILED 0:58.81 dalmore tegra_defconfig : FAILED 1:35.37 dalmore multi_v7_defconfig : FAILED 1:04.59 dalmore multi_lpae_defconfig : FAILED 1:04.71 hummingboard imx_v6_v7_defconfig : FAILED 1:10.46 hummingboard multi_v7_defconfig : FAILED 1:01.55 omap5uevm omap2plus_defconfig : FAILED 1:29.17 omap5uevm multi_v7_defconfig : FAILED 1:13.98 omap5uevm multi_lpae_defconfig : FAILED 1:10.09 panda omap2plus_defconfig : FAILED 1:12.90 panda multi_v7_defconfig : FAILED 1:15.98 sama5 sama5_defconfig : FAILED 1:12.60 seaboard tegra_defconfig : FAILED 1:28.80 seaboard multi_v7_defconfig : FAILED 1:05.45 snow exynos_defconfig : FAILED 2:01.33 snowball multi_v7_defconfig : FAILED 1:08.32 trimslice tegra_defconfig : FAILED 1:14.19 trimslice multi_v7_defconfig : FAILED 1:03.94 wandboard imx_v6_v7_defconfig : FAILED 1:02.36 wandboard multi_v7_defconfig : FAILED 1:08.38 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:16.24 snowball u8500_defconfig : passed 1:53.84 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board arndale-exynos_defconfig failure log: ------------------------------------------------- [ 0.680420] io scheduler cfq registered (default) [ 0.730004] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.731269] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 83, base_baud = 0) is a S3C6400/10 [ 0.731607] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 84, base_baud = 0) is a S3C6400/10 [ 0.731924] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 85, base_baud = 0) is a S3C6400/10 [ 1.988238] console [ttySAC2] enabled [ 1.992260] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 86, base_baud = 0) is a S3C6400/10 [ 2.008218] brd: module loaded [ 2.013232] loop: module loaded [ 2.015383] usbcore: registered new interface driver asix [ 2.020357] usbcore: registered new interface driver ax88179_178a [ 2.026432] usbcore: registered new interface driver cdc_ether [ 2.032263] usbcore: registered new interface driver smsc75xx [ 2.038001] usbcore: registered new interface driver smsc95xx [ 2.043698] usbcore: registered new interface driver net1080 [ 2.049344] usbcore: registered new interface driver cdc_subset [ 2.055244] usbcore: registered new interface driver zaurus [ 2.060843] usbcore: registered new interface driver cdc_ncm [ 2.066591] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.072901] ehci-exynos: EHCI EXYNOS driver [ 2.077225] usbcore: registered new interface driver usb-storage [ 2.083551] mousedev: PS/2 mouse device common for all mice [ 2.089061] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling [ 2.094419] s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc0 [ 2.100341] s3c-rtc 101e0000.rtc: warning: invalid RTC value so initializing it [ 2.108398] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel(a)redhat.com [ 2.116096] sdhci: Secure Digital Host Controller Interface driver [ 2.122190] sdhci: Copyright(c) Pierre Ossman [ 2.126652] Synopsys Designware Multimedia Card Interface Driver [ 2.133554] usbcore: registered new interface driver usbhid [ 2.138081] usbhid: USB HID core driver [ 2.142040] TCP: cubic registered [ 2.145202] NET: Registered protocol family 17 [ 2.149668] NET: Registered protocol family 15 [ 2.154111] Registering SWP/SWPB emulation handler [ 2.176333] VDD_IOPERI_1.8V: disabling [ 2.182601] s3c-rtc 101e0000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.190819] Waiting for root device /dev/mmcblk0p1... ~$off # PYBOOT: Exception: timeout ======================================================================== Board bbb-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.067941] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.075927] usbcore: registered new interface driver pegasus [ 1.082030] usbcore: registered new interface driver asix [ 1.087794] usbcore: registered new interface driver ax88179_178a [ 1.094311] usbcore: registered new interface driver cdc_ether [ 1.100587] usbcore: registered new interface driver smsc75xx [ 1.106753] usbcore: registered new interface driver smsc95xx [ 1.112908] usbcore: registered new interface driver net1080 [ 1.118940] usbcore: registered new interface driver cdc_subset [ 1.125272] usbcore: registered new interface driver zaurus [ 1.131332] usbcore: registered new interface driver cdc_ncm [ 1.137333] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.144234] ehci-pci: EHCI PCI platform driver [ 1.149002] ehci-platform: EHCI generic platform driver [ 1.154678] ehci-omap: OMAP-EHCI Host Controller driver [ 1.160317] ehci-orion: EHCI orion driver [ 1.164641] SPEAr-ehci: EHCI SPEAr driver [ 1.168974] tegra-ehci: Tegra EHCI driver [ 1.173911] usbcore: registered new interface driver usb-storage [ 1.182198] mousedev: PS/2 mouse device common for all mice [ 1.190361] i2c /dev entries driver [ 1.194789] usbcore: registered new interface driver uvcvideo [ 1.200875] USB Video Class driver (1.1.1) [ 1.205189] gspca_main: v2.14.0 registered [ 1.211295] sdhci: Secure Digital Host Controller Interface driver [ 1.217793] sdhci: Copyright(c) Pierre Ossman [ 1.223080] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.229743] usbcore: registered new interface driver usbhid [ 1.235645] usbhid: USB HID core driver [ 1.244217] TCP: cubic registered [ 1.247736] NET: Registered protocol family 17 [ 1.252891] Key type dns_resolver registered [ 1.258342] ThumbEE CPU extension supported. [ 1.262943] Registering SWP/SWPB emulation handler [ 1.269938] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.284255] ALSA device list: [ 1.287399] No soundcards found. [ 1.292221] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board bbb-omap2plus_defconfig failure log: ------------------------------------------------- [ 0.777081] io scheduler deadline registered [ 0.777202] io scheduler cfq registered (default) [ 0.780055] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.783661] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.794629] omap_uart 44e09000.serial: no wakeirq for uart0 [ 0.794704] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@44e09000[0]' [ 0.795471] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 1.499893] console [ttyO0] enabled [ 1.552810] brd: module loaded [ 1.584140] loop: module loaded [ 1.591988] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.602819] usbcore: registered new interface driver asix [ 1.608737] usbcore: registered new interface driver ax88179_178a [ 1.615439] usbcore: registered new interface driver cdc_ether [ 1.621913] usbcore: registered new interface driver smsc95xx [ 1.628149] usbcore: registered new interface driver net1080 [ 1.634356] usbcore: registered new interface driver cdc_subset [ 1.640835] usbcore: registered new interface driver zaurus [ 1.647041] usbcore: registered new interface driver cdc_ncm [ 1.656594] usbcore: registered new interface driver cdc_wdm [ 1.663105] usbcore: registered new interface driver usb-storage [ 1.669694] usbcore: registered new interface driver usbtest [ 1.680832] mousedev: PS/2 mouse device common for all mice [ 1.692382] i2c /dev entries driver [ 1.696205] Driver for 1-wire Dallas network protocol. [ 1.704574] ledtrig-cpu: registered to indicate activity on CPUs [ 1.711913] usbcore: registered new interface driver usbhid [ 1.717755] usbhid: USB HID core driver [ 1.723319] oprofile: using arm/armv7 [ 1.728226] TCP: cubic registered [ 1.731899] Initializing XFRM netlink socket [ 1.736581] NET: Registered protocol family 17 [ 1.741435] NET: Registered protocol family 15 [ 1.746612] Key type dns_resolver registered [ 1.753099] ThumbEE CPU extension supported. [ 1.757653] Registering SWP/SWPB emulation handler [ 1.772415] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.813816] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- Tegra30 (Beaver) # tftp 0x82000000 next/next-20140513/multi_v7_defconfig/zImage tftp 0x82000000 next/next-20140513/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.105 Filename 'next/next-20140513/multi_v7_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################## 3.5 MiB/s done Bytes transferred = 4666616 (4734f8 hex) Tegra30 (Beaver) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra30 (Beaver) # tftp 0x83000000 next/next-20140513/multi_v7_defconfig/dtbs/tegra30-beaver.dtb tftp 0x83000000 next/next-20140513/multi_v7_defconfig/dtbs/tegra30-beaver.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.105 Filename 'next/next-20140513/multi_v7_defconfig/dtbs/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: *## 814.5 KiB/s done Bytes transferred = 24197 (5e85 hex) Tegra30 (Beaver) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 earlyprintk debug root=/dev/mmcblk0p1 rootwait Tegra30 (Beaver) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x4734f8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff7000, end 8ffffe84 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board beaver-tegra_defconfig failure log: ------------------------------------------------- [ 0.801197] usbcore: registered new interface driver ax88179_178a [ 0.807319] usbcore: registered new interface driver cdc_ether [ 0.813266] usbcore: registered new interface driver smsc75xx [ 0.819053] usbcore: registered new interface driver smsc95xx [ 0.824840] usbcore: registered new interface driver net1080 [ 0.830544] usbcore: registered new interface driver cdc_subset [ 0.836552] usbcore: registered new interface driver zaurus [ 0.842230] usbcore: registered new interface driver cdc_ncm [ 0.847825] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.854381] ehci-pci: EHCI PCI platform driver [ 0.858977] tegra-ehci: Tegra EHCI driver [ 0.863315] usbcore: registered new interface driver cdc_acm [ 0.868665] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 0.876853] usbcore: registered new interface driver cdc_wdm [ 0.882595] usbcore: registered new interface driver usb-storage [ 0.889192] mousedev: PS/2 mouse device common for all mice [ 0.895919] usbcore: registered new interface driver uvcvideo [ 0.899951] USB Video Class driver (1.1.1) [ 0.904157] gspca_main: v2.14.0 registered [ 0.908852] sdhci: Secure Digital Host Controller Interface driver [ 0.914524] sdhci: Copyright(c) Pierre Ossman [ 0.918936] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.925270] usbcore: registered new interface driver usbhid [ 0.930284] usbhid: USB HID core driver [ 0.937544] TCP: cubic registered [ 0.939258] NET: Registered protocol family 10 [ 0.944761] mip6: Mobile IPv6 [ 0.946574] sit: IPv6 over IPv4 tunneling driver [ 0.953508] NET: Registered protocol family 17 [ 0.956156] NET: Registered protocol family 15 [ 0.960742] Bluetooth: RFCOMM socket layer initialized [ 0.965866] Bluetooth: RFCOMM ver 1.11 [ 0.969655] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 0.975041] Bluetooth: BNEP socket layer initialized [ 0.980045] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 0.986043] Bluetooth: HIDP socket layer initialized [ 0.992119] Registering SWP/SWPB emulation handler [ 0.996627] bootconsole [earlycon0] disabled ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-bcm_defconfig failure log: ------------------------------------------------- [ 0.060000] NET: Registered protocol family 16 [ 0.060000] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.060000] cpuidle: using governor ladder [ 0.060000] cpuidle: using governor menu [ 0.060000] Kona Secure API initialized [ 0.060000] L310 cache controller enabled [ 0.060000] l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x1e050000, Cache size: 512 kB [ 0.100000] SCSI subsystem initialized [ 0.100000] NET: Registered protocol family 2 [ 0.100000] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.100000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 0.100000] TCP: Hash tables configured (established 8192 bind 8192) [ 0.100000] TCP: reno registered [ 0.100000] UDP hash table entries: 512 (order: 1, 8192 bytes) [ 0.100000] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) [ 0.100000] NET: Registered protocol family 1 [ 0.100000] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.110000] fuse init (API version 7.23) [ 0.110000] msgmni has been set to 1496 [ 0.110000] io scheduler noop registered [ 0.110000] io scheduler deadline registered [ 0.110000] io scheduler cfq registered (default) [ 0.110000] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.110000] console [ttyS0] disabled [ 0.110000] 3e000000.uart: ttyS0 at MMIO 0x3e000000 (irq = 99, base_baud = 808290) is a 16550A [ 0.390000] console [ttyS0] enabled [ 0.390000] mousedev: PS/2 mouse device common for all mice [ 0.390000] i2c /dev entries driver [ 0.400000] sdhci: Secure Digital Host Controller Interface driver [ 0.400000] sdhci: Copyright(c) Pierre Ossman [ 0.410000] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.410000] TCP: cubic registered [ 0.410000] NET: Registered protocol family 10 [ 0.420000] sit: IPv6 over IPv4 tunneling driver [ 0.420000] NET: Registered protocol family 17 [ 0.420000] NET: Registered protocol family 15 [ 0.430000] ThumbEE CPU extension supported. [ 0.430000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.540000] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 0.550000] usbcore: registered new interface driver pegasus [ 0.550000] usbcore: registered new interface driver asix [ 0.560000] usbcore: registered new interface driver ax88179_178a [ 0.560000] usbcore: registered new interface driver cdc_ether [ 0.570000] usbcore: registered new interface driver smsc75xx [ 0.570000] usbcore: registered new interface driver smsc95xx [ 0.580000] usbcore: registered new interface driver net1080 [ 0.580000] usbcore: registered new interface driver cdc_subset [ 0.590000] usbcore: registered new interface driver zaurus [ 0.590000] usbcore: registered new interface driver cdc_ncm [ 0.600000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.600000] ehci-pci: EHCI PCI platform driver [ 0.610000] ehci-platform: EHCI generic platform driver [ 0.610000] ehci-omap: OMAP-EHCI Host Controller driver [ 0.620000] ehci-orion: EHCI orion driver [ 0.620000] SPEAr-ehci: EHCI SPEAr driver [ 0.620000] tegra-ehci: Tegra EHCI driver [ 0.630000] usbcore: registered new interface driver usb-storage [ 0.630000] mousedev: PS/2 mouse device common for all mice [ 0.640000] i2c /dev entries driver [ 0.640000] usbcore: registered new interface driver uvcvideo [ 0.650000] USB Video Class driver (1.1.1) [ 0.650000] gspca_main: v2.14.0 registered [ 0.650000] sdhci: Secure Digital Host Controller Interface driver [ 0.660000] sdhci: Copyright(c) Pierre Ossman [ 0.660000] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.670000] usbcore: registered new interface driver usbhid [ 0.670000] usbhid: USB HID core driver [ 0.680000] TCP: cubic registered [ 0.680000] NET: Registered protocol family 17 [ 0.680000] Key type dns_resolver registered [ 0.690000] ThumbEE CPU extension supported. [ 0.690000] Registering SWP/SWPB emulation handler [ 0.690000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.700000] ALSA device list: [ 0.700000] No soundcards found. [ 0.700000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- sun4i#tftp 0x42000000 next/next-20140513/multi_v7_defconfig/zImage tftp 0x42000000 next/next-20140513/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.139 Filename 'next/next-20140513/multi_v7_defconfig/zImage'. Load address: 0x42000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################## 2.6 MiB/s done Bytes transferred = 4666616 (4734f8 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x48000000 next/next-20140513/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x48000000 next/next-20140513/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.139 Filename 'next/next-20140513/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x48000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15184 (3b50 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x42000000 - 0x48000000 bootz 0x42000000 - 0x48000000 Kernel image @ 0x42000000 [ 0x000000 - 0x4734f8 ] ## Flattened Device Tree blob at 48000000 Booting using the fdt blob at 0x48000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.139 sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x42000000 next/next-20140513/sunxi_defconfig/zImage tftp 0x42000000 next/next-20140513/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.139 Filename 'next/next-20140513/sunxi_defconfig/zImage'. Load address: 0x42000000 Loading: *################################################################# ############################################################# 3 MiB/s done Bytes transferred = 1845104 (1c2770 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x48000000 next/next-20140513/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x48000000 next/next-20140513/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.139 Filename 'next/next-20140513/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x48000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15184 (3b50 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x42000000 - 0x48000000 bootz 0x42000000 - 0x48000000 Kernel image @ 0x42000000 [ 0x000000 - 0x1c2770 ] ## Flattened Device Tree blob at 48000000 Booting using the fdt blob at 0x48000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- sun7i# tftp 0x42000000 next/next-20140513/multi_lpae_defconfig/zImage tftp 0x42000000 next/next-20140513/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.117 Filename 'next/next-20140513/multi_lpae_defconfig/zImage'. Load address: 0x42000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ 4.4 MiB/s done Bytes transferred = 4689824 (478fa0 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x44000000 next/next-20140513/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x44000000 next/next-20140513/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.117 Filename 'next/next-20140513/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x44000000 Loading: *## 668.9 KiB/s done Bytes transferred = 18501 (4845 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x42000000 - 0x44000000 bootz 0x42000000 - 0x44000000 Kernel image @ 0x42000000 [ 0x000000 - 0x478fa0 ] ## Flattened Device Tree blob at 44000000 Booting using the fdt blob at 0x44000000 Loading Device Tree to 40ff8000, end 40fff844 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x42000000 next/next-20140513/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.117 Filename 'next/next-20140513/multi_v7_defconfig/zImage'. Load address: 0x42000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################## 4.3 MiB/s done Bytes transferred = 4666616 (4734f8 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x44000000 next/next-20140513/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x44000000 nenode: cubie2 status: on xt/next-20140513/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.117 Filename 'next/next-20140513/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x44000000 Loading: *## 694.3 KiB/s done Bytes transferred = 18501 (4845 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x42000000 - 0x44000000 bootz 0x42000000 - 0x44000000 Kernel image @ 0x42000000 [ 0x000000 - 0x4734f8 ] ## Flattened Device Tree blob at 44000000 Booting using the fdt blob at 0x44000000 Loading Device Tree to 40ff8000, end 40fff844 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.117 sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x42000000 next/next-20140513/sunxi_defconfig/zImage tftp 0x42000000 next/next-20140513/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.117 Filename 'next/next-20140513/sunxi_defconfig/zImage'. Load address: 0x42000000 Loading: *################################################################# ############################################################# 4.4 MiB/s done Bytes transferred = 1845104 (1c2770 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x44000000 next/next-20140513/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x44000000 next/next-20140513/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.117 Filename 'next/next-20140513/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x44000000 Loading: *## 3.5 MiB/s done Bytes transferred = 18501 (4845 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x42000000 - 0x44000000 bootz 0x42000000 - 0x44000000 Kernel image @ 0x42000000 [ 0x000000 - 0x1c2770 ] ## Flattened Device Tree blob at 44000000 Booting using the fdt blob at 0x44000000 Loading Device Tree to 40ff8000, end 40fff844 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- Tegra114 (Dalmore) # tftp 0x82000000 next/next-20140513/multi_lpae_defconfig/zImage tftp 0x82000000 next/next-20140513/multi_lpae_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.120 Filename 'next/next-20140513/multi_lpae_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ 2.9 MiB/s done Bytes transferred = 4689824 (478fa0 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 next/next-20140513/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 next/next-20140513/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.120 Filename 'next/next-20140513/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 619.1 KiB/s done Bytes transferred = 34244 (85c4 hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x478fa0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff5c3 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- Tegra114 (Dalmore) # tftp 0x82000000 next/next-20140513/multi_v7_defconfig/zImage tftp 0x82000000 next/next-20140513/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.120 Filename 'next/next-20140513/multi_v7_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################## 3 MiB/s done Bytes transferred = 4666616 (4734f8 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) #tftp 0x83000000 next/next-20140513/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 next/next-20140513/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.120 Filename 'next/next-20140513/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 903.3 KiB/s done Bytes transferred = 34244 (85c4 hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x4734f8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff5c3 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-tegra_defconfig failure log: ------------------------------------------------- [ 1.024492] usbcore: registered new interface driver ax88179_178a [ 1.030706] usbcore: registered new interface driver cdc_ether [ 1.036800] usbcore: registered new interface driver smsc75xx [ 1.042537] usbcore: registered new interface driver smsc95xx [ 1.048216] usbcore: registered new interface driver net1080 [ 1.053913] usbcore: registered new interface driver cdc_subset [ 1.059914] usbcore: registered new interface driver zaurus [ 1.065738] usbcore: registered new interface driver cdc_ncm [ 1.071150] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.077379] ehci-pci: EHCI PCI platform driver [ 1.082319] tegra-ehci: Tegra EHCI driver [ 1.087691] usbcore: registered new interface driver cdc_acm [ 1.091596] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.100259] usbcore: registered new interface driver cdc_wdm [ 1.106076] usbcore: registered new interface driver usb-storage [ 1.114793] mousedev: PS/2 mouse device common for all mice [ 1.126532] usbcore: registered new interface driver uvcvideo [ 1.130472] USB Video Class driver (1.1.1) [ 1.134658] gspca_main: v2.14.0 registered [ 1.141555] sdhci: Secure Digital Host Controller Interface driver [ 1.145924] sdhci: Copyright(c) Pierre Ossman [ 1.150456] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.159071] usbcore: registered new interface driver usbhid [ 1.162834] usbhid: USB HID core driver [ 1.183620] TCP: cubic registered [ 1.186305] NET: Registered protocol family 10 [ 1.195181] mip6: Mobile IPv6 [ 1.196466] sit: IPv6 over IPv4 tunneling driver [ 1.212046] NET: Registered protocol family 17 [ 1.214870] NET: Registered protocol family 15 [ 1.219729] Bluetooth: RFCOMM socket layer initialized [ 1.224456] Bluetooth: RFCOMM ver 1.11 [ 1.228348] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.233640] Bluetooth: BNEP socket layer initialized [ 1.238701] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.244653] Bluetooth: HIDP socket layer initialized [ 1.254731] Registering SWP/SWPB emulation handler [ 1.261231] bootconsole [earlycon0] disabled ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-imx_v6_v7_defconfig failure log: ------------------------------------------------- tftp 0x12000000 next/next-20140513/imx_v6_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'next/next-20140513/imx_v6_v7_defconfig/zImage'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################################### 2 MiB/s done Bytes transferred = 5287104 (50acc0 hex) C1 U-Boot > setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot > tftp 0x18000000 next/next-20140513/imx_v6_v7_defconfig/dtbs/imx6dl-hummingboard.dtb tftp 0x18000000 next/next-20140513/imx_v6_v7_defconfig/dtbs/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'next/next-20140513/imx_v6_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'. Load address: 0x18000000 Loading: *## 1 MiB/s done Bytes transferred = 26460 (675c hex) C1 U-Boot > printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk C1 U-Boot > bootz 0x12000000 - 0x18000000 bootz 0x12000000 - 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0x50acc0 ] ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800975b Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- C1 U-Boot > tftp 0x12000000 next/next-20140513/multi_v7_defconfig/zImage tftp 0x12000000 next/next-20140513/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'next/next-20140513/multi_v7_defconfig/zImage'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################## 2 MiB/s done Bytes transferred = 4666616 (4734f8 hex) C1 U-Boot > setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot > tftp 0x18000000 next/next-20140513/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb tftp 0x18000000 next/next-20140513/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'next/next-20140513/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'. Load address: 0x18000000 Loading: *## 738.3 KiB/s done Bytes transferred = 26460 (675c hex) C1 U-Boot >printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk C1 U-Boot >bootz 0x12000000 - 0x18000000 bootz 0x12000000 - 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0x4734f8 ] ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800975b Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.106 Filename 'next/next-20140513/multi_lpae_defconfig/zImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ 2.7 MiB/s done Bytes transferred = 4689824 (478fa0 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot#tftp 0x82000000 next/next-20140513/multi_lpae_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 next/next-20140513/multi_lpae_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.106 Filename 'next/next-20140513/multi_lpae_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *#### 1.1 MiB/s done Bytes transferred = 45220 (b0a4 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk1p2 rootwait debug U-Boot# bootz 0x81000000 - 0x82000000 bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x478fa0 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200e0a3 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.106 Filename 'next/next-20140513/multi_v7_defconfig/zImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################## 2.6 MiB/s done Bytes transferred = 4666616 (4734f8 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x82000000 next/next-20140513/multi_v7_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 next/next-20140513/multi_v7_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.106 Filename 'next/next-20140513/multi_v7_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *#### 833 KiB/s done Bytes transferred = 45220 (b0a4 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk1p2 rootwait debug U-Boot# bootz 0x81000000 - 0x82000000 bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x4734f8 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200e0a3 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.106 Filename 'next/next-20140513/omap2plus_defconfig/zImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################### 2.7 MiB/s done Bytes transferred = 4330304 (421340 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x82000000 next/next-20140513/omap2plus_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 next/next-20140513/omap2plus_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.106 Filename 'next/next-20140513/omap2plus_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *#### 1.1 MiB/s done Bytes transferred = 45220 (b0a4 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk1p2 rootwait debug U-Boot# bootz 0x81000000 - 0x82000000 bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x421340 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200e0a3 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- ################################################################# ################################################################# ################################################################# ########################################################## done Bytes transferred = 4666680 (473538 hex) Panda # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Panda # tftp 0x82000000 next/next-20140513/multi_v7_defconfig/dtbs/omap4-panda-es.dtb tftp 0x82000000 next/next-20140513/multi_v7_defconfig/dtbs/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.182 Filename 'next/next-20140513/multi_v7_defconfig/dtbs/omap4-panda-es.dtb'. Load address: 0x82000000 Loading: *#### done Bytes transferred = 55467 (d8ab hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk Panda # bootm 0x81000000 - 0x82000000 bootm 0x81000000 - 0x82000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4666616 Bytes = 4.5 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Kernel Image ... OK OK Using Device Tree in place at 82000000, end 820108aa Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-omap2plus_defconfig failure log: ------------------------------------------------- ################################################################# ################################################################# ################################################################# ################################### done Bytes transferred = 4330368 (421380 hex) Panda # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Panda # tftp 0x82000000 next/next-20140513/omap2plus_defconfig/dtbs/omap4-panda-es.dtb tftp 0x82000000 next/next-20140513/omap2plus_defconfig/dtbs/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.182 Filename 'next/next-20140513/omap2plus_defconfig/dtbs/omap4-panda-es.dtb'. Load address: 0x82000000 Loading: *#### done Bytes transferred = 55467 (d8ab hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk Panda # bootm 0x81000000 - 0x82000000 bootm 0x81000000 - 0x82000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4330304 Bytes = 4.1 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Kernel Image ... OK OK Using Device Tree in place at 82000000, end 820108aa Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board sama5-sama5_defconfig failure log: ------------------------------------------------- done Bytes transferred = 3040656 (2e6590 hex) U-Boot> setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot> tftp 0x21000000 next/next-20140513/sama5_defconfig/dtbs/sama5d35ek.dtb tftp 0x21000000 next/next-20140513/sama5_defconfig/dtbs/sama5d35ek.dtb gmacb0: PHY present at 1 gmacb0: link up, 1000Mbps full-duplex (lpa: 0x0300) Using gmacb0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.199 Filename 'next/next-20140513/sama5_defconfig/dtbs/sama5d35ek.dtb'. Load address: 0x21000000 Loading: *## done Bytes transferred = 28144 (6df0 hex) U-Boot> setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait rw setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait rw U-Boot> printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait rw U-Boot> bootm 0x22000000 - 0x21000000 bootm 0x22000000 - 0x21000000 ## Booting kernel from Legacy Image at 22000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3040592 Bytes = 2.9 MiB Load Address: 20008000 Entry Point: 20008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 21000000 Booting using the fdt blob at 0x21000000 Loading Kernel Image ... OK OK Loading Device Tree to 3fd80000, end 3fd89def ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. ~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- Tegra20 (SeaBoard) # tftp 0x800000 next/next-20140513/multi_v7_defconfig/zImage tftp 0x800000 next/next-20140513/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.118 Filename 'next/next-20140513/multi_v7_defconfig/zImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################## 3.3 MiB/s done Bytes transferred = 4666616 (4734f8 hex) Tegra20 (SeaBoard) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra20 (SeaBoard) # tftp 0x1800000 next/next-20140513/multi_v7_defconfig/dtbs/tegra20-seaboard.dtb tftp 0x1800000 next/next-20140513/multi_v7_defconfig/dtbs/tegra20-seaboard.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.118 Filename 'next/next-20140513/multi_v7_defconfig/dtbs/tegra20-seaboard.dtb'. Load address: 0x1800000 Loading: *## 538.1 KiB/s done Bytes transferred = 26465 (6761 hex) Tegra20 (SeaBoard) # printenv bootargs printenv bootargs bootargs=root=/dev/mmcblk0p3 console=ttyS0,115200 debug earlyprintk Tegra20 (SeaBoard) # bootz 0x800000 - 0x1800000 bootz 0x800000 - 0x1800000 Kernel image @ 0x800000 [ 0x000000 - 0x4734f8 ] ## Flattened Device Tree blob at 01800000 Booting using the fdt blob at 0x1800000 Loading Device Tree to 0fff6000, end 0ffff760 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-tegra_defconfig failure log: ------------------------------------------------- [ 0.694549] usbcore: registered new interface driver smsc75xx [ 0.700454] usbcore: registered new interface driver smsc95xx [ 0.706300] usbcore: registered new interface driver net1080 [ 0.712071] usbcore: registered new interface driver cdc_subset [ 0.718099] usbcore: registered new interface driver zaurus [ 0.723825] usbcore: registered new interface driver cdc_ncm [ 0.729533] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.736059] ehci-pci: EHCI PCI platform driver [ 0.740700] tegra-ehci: Tegra EHCI driver [ 0.745110] usbcore: registered new interface driver cdc_acm [ 0.750765] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 0.758946] usbcore: registered new interface driver cdc_wdm [ 0.764748] usbcore: registered new interface driver usb-storage [ 0.771489] mousedev: PS/2 mouse device common for all mice [ 0.779019] usbcore: registered new interface driver uvcvideo [ 0.784749] USB Video Class driver (1.1.1) [ 0.788941] gspca_main: v2.14.0 registered [ 0.793618] cpufreq: __cpufreq_add_dev: CPU0: Running at unlisted freq: 1200000 KHz [ 0.803083] cpufreq: __cpufreq_add_dev: CPU0: Unlisted initial frequency changed to: 1000000 KHz [ 0.812452] sdhci: Secure Digital Host Controller Interface driver [ 0.818635] sdhci: Copyright(c) Pierre Ossman [ 0.823043] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.829582] usbcore: registered new interface driver usbhid [ 0.835140] usbhid: USB HID core driver [ 0.843580] TCP: cubic registered [ 0.847145] NET: Registered protocol family 10 [ 0.853024] mip6: Mobile IPv6 [ 0.855989] sit: IPv6 over IPv4 tunneling driver [ 0.863712] NET: Registered protocol family 17 [ 0.868217] NET: Registered protocol family 15 [ 0.872747] Bluetooth: RFCOMM socket layer initialized [ 0.877889] Bluetooth: RFCOMM ver 1.11 [ 0.881727] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 0.887077] Bluetooth: BNEP socket layer initialized [ 0.892109] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 0.898093] Bluetooth: HIDP socket layer initialized [ 0.903929] Registering SWP/SWPB emulation handler [ 0.909603] bootconsole [earlycon0] disabled ~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-exynos_defconfig failure log: ------------------------------------------------- [ 2920.662954] Console: switching to colour frame buffer device 195x54 [ 2920.669332] simple-framebuffer bfc00000.framebuffer: fb0: simplefb registered! [ 2920.708005] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2920.708809] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 83, base_baud = 0) is a S3C6400/10 [ 2920.709022] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 84, base_baud = 0) is a S3C6400/10 [ 2920.709223] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 85, base_baud = 0) is a S3C6400/10 [ 2920.709422] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 86, base_baud = 0) is a S3C6400/10 [ 2921.258471] console [ttySAC3] enabled [ 2921.266618] brd: module loaded [ 2921.270261] loop: module loaded [ 2921.272207] usbcore: registered new interface driver asix [ 2921.277353] usbcore: registered new interface driver ax88179_178a [ 2921.283417] usbcore: registered new interface driver cdc_ether [ 2921.289247] usbcore: registered new interface driver smsc75xx [ 2921.294986] usbcore: registered new interface driver smsc95xx [ 2921.300708] usbcore: registered new interface driver net1080 [ 2921.306334] usbcore: registered new interface driver cdc_subset [ 2921.312231] usbcore: registered new interface driver zaurus [ 2921.317819] usbcore: registered new interface driver cdc_ncm [ 2921.323480] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2921.329911] ehci-exynos: EHCI EXYNOS driver [ 2921.334156] usbcore: registered new interface driver usb-storage [ 2921.340339] mousedev: PS/2 mouse device common for all mice [ 2921.345887] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling [ 2921.351337] s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc0 [ 2921.357345] s3c-rtc 101e0000.rtc: warning: invalid RTC value so initializing it [ 2921.365083] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel(a)redhat.com [ 2921.373085] sdhci: Secure Digital Host Controller Interface driver [ 2921.379206] sdhci: Copyright(c) Pierre Ossman [ 2921.383602] Synopsys Designware Multimedia Card Interface Driver [ 2921.390133] usbcore: registered new interface driver usbhid [ 2921.395090] usbhid: USB HID core driver [ 2921.399004] TCP: cubic registered [ 2921.402218] NET: Registered protocol family 17 [ 2921.406660] NET: Registered protocol family 15 [ 2921.411108] Registering SWP/SWPB emulation handler [ 2921.416274] s3c-rtc 101e0000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2921.425065] Waiting for root device /dev/mmcblk0p3... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.112 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-XVehHX/tmp3qQe0I-uImage tftp 0x01000000 tmp/snowball-XVehHX/tmp3qQe0I-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.112 Filename 'tmp/snowball-XVehHX/tmp3qQe0I-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################# done Bytes transferred = 4707925 (47d655 hex) U8500 $printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4707861 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board trimslice-multi_v7_defconfig failure log: ------------------------------------------------- Tegra20 (TrimSlice) # tftp 0x800000 next/next-20140513/multi_v7_defconfig/zImage tftp 0x800000 next/next-20140513/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.102 Filename 'next/next-20140513/multi_v7_defconfig/zImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################## 3.4 MiB/s done Bytes transferred = 4666616 (4734f8 hex) Tegra20 (TrimSlice) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra20 (TrimSlice) # tftp 0x1800000 next/next-20140513/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb tftp 0x1800000 next/next-20140513/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.102 Filename 'next/next-20140513/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb'. Load address: 0x1800000 Loading: *## 2.4 MiB/s done Bytes transferred = 20401 (4fb1 hex) Tegra20 (TrimSlice) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw Tegra20 (TrimSlice) # bootz 0x800000 - 0x1800000 bootz 0x800000 - 0x1800000 Kernel image @ 0x800000 [ 0x000000 - 0x4734f8 ] ## Flattened Device Tree blob at 01800000 Booting using the fdt blob at 0x1800000 Loading Device Tree to 0fff8000, end 0fffffb0 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board trimslice-tegra_defconfig failure log: ------------------------------------------------- Waiting for Ethernet connection... done. Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.102 Filename 'next/next-20140513/tegra_defconfig/zImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################### 3.4 MiB/s done Bytes transferred = 4344744 (424ba8 hex) Tegra20 (TrimSlice) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra20 (TrimSlice) # tftp 0x1800000 next/next-20140513/tegra_defconfig/dtbs/tegra20-trimslice.dtb tftp 0x1800000 next/next-20140513/tegra_defconfig/dtbs/tegra20-trimslice.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.102 Filename 'next/next-20140513/tegra_defconfig/dtbs/tegra20-trimslice.dtb'. Load address: 0x1800000 Loading: *## 2.4 MiB/s done Bytes transferred = 20401 (4fb1 hex) Tegra20 (TrimSlice) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw Tegra20 (TrimSlice) # bootz 0x800000 - 0x1800000 bootz 0x800000 - 0x1800000 Kernel image @ 0x800000 [ 0x000000 - 0x424ba8 ] ## Flattened Device Tree blob at 01800000 Booting using the fdt blob at 0x1800000 Loading Device Tree to 0fff8000, end 0fffffb0 ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-imx_v6_v7_defconfig failure log: ------------------------------------------------- tftp 0x12000000 next/next-20140513/imx_v6_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.145 Filename 'next/next-20140513/imx_v6_v7_defconfig/zImage'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################################### 6.4 MiB/s done Bytes transferred = 5287104 (50acc0 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x18000000 next/next-20140513/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x18000000 next/next-20140513/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.145 Filename 'next/next-20140513/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x18000000 Loading: *### 998 KiB/s done Bytes transferred = 29638 (73c6 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x12000000 - 0x18000000 bootz 0x12000000 - 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0x50acc0 ] ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800a3c5 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x12000000 next/next-20140513/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.145 Filename 'next/next-20140513/multi_v7_defconfig/zImage'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################## 7.1 MiB/s done Bytes transferred = 4666616 (4734f8 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x18000000 next/next-20140513/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x18000000 next/next-20140513/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.145 Filename 'next/next-20140513/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x18000000 Loading: *### 963.9 KiB/s done Bytes transferred = 29638 (73c6 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x12000000 - 0x18000000 bootz node: wandboard status: on 0x12000000 - 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0x4734f8 ] ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800a3c5 Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 7 months

next build: 396 warnings 2 failures (next/next-20140513)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: 07af2b6 Add linux-next specific files for 20140513 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140513/ Runtime: 41m 23s Passed: 122 Failed: 2 Warnings: 396 Section mismatches: 50 ------------------------------------------------------------------------------- Failed defconfigs: exynos_defconfig lpc32xx_defconfig ------------------------------------------------------------------------------- Errors: exynos_defconfig: arch/arm/boot/dts/exynos5260.dtsi:14:46: fatal error: dt-bindings/clock/exynos5260-clk.h: No such file or directory lpc32xx_defconfig: arch/arm/mach-lpc32xx/phy3250.c:205:2: error: unknown field 'dma_filter' specified in initializer Warnings: 1 arch/arm/mach-exynos/exynos.c:207:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 10 include/linux/bitops.h:48) [-Wdeprecated-declarations] 12 sound/soc/soc-core.c:1667:3: warning: passing argument 1 of 'of_node_full_name' discards 'const' qualifier from pointer target type [enabled by default] 12 sound/soc/soc-core.c:1682:4: warning: passing argument 1 of 'of_node_full_name' discards 'const' qualifier from pointer target type [enabled by default] 25 kernel/events/core.c:7434:35: warning: unused variable 'tmp' [-Wunused-variable] 108 mm/compaction.c:773:15: warning: 'next_free_pfn' may be used uninitialized in this function [-Wmaybe-uninitialized] 111 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 111 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128a8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128b0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128b8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128c0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128c8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128d0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128d8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128e0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128e8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128f0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128f8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x12900): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x1e4): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x1ec): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x1f4): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x1fc): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x204): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x20c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x214): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x21c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x224): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x22c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x234): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x23c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x15c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x164): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x16c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x174): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x17c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x184): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x18c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x194): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x19c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x1a4): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x1ac): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x1b4): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28388): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28390): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28398): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283a0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283a8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283b0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283b8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283c0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283c8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283d0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283d8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283e0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown)

10 years, 7 months

← Newer
1
...
16
17
18
19
20
21
22
...
30
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports May 2014