Linaro-mm-sig July 2025

linaro-mm-sig@lists.linaro.org

20 participants
66 discussions

Re: [PATCH v2 02/13] dt-bindings: media: mediatek: add seninf-core binding

by Krzysztof Kozlowski

On Mon, Jul 07, 2025 at 09:31:43AM +0800, shangyao lin wrote: > From: "shangyao.lin" <shangyao.lin(a)mediatek.com> > > 1. Add camera isp7x module device document > Still no SoB, still not tested, still no checkpatch... and also: ... > + > +... > \ No newline at end of file Look, you have patch warnings. Review your patches before you post them. You should reach internally to mediatek colleagues to explain you how this process works. I really do not understand why mediatek has so poor quality of work and cannot improve over last 1-2 years! > -- > 2.18.0 >

2 weeks

Re: [PATCH v2 01/13] dt-bindings: media: mediatek: add camisp binding

by Krzysztof Kozlowski

On Mon, Jul 07, 2025 at 09:31:42AM +0800, shangyao lin wrote: > From: "shangyao.lin" <shangyao.lin(a)mediatek.com> > > Add camera isp7x module device document. Missing SoB, missing checkpatch. > > --- > > Changes in v2: > - Rename binding file to mediatek,mt8188-camisp.yaml > - Split bindings into four separate patches (one per YAML file) > - Various fixes per review comments > - Update maintainers list > > Signed-off-by: shangyao.lin <shangyao.lin(a)mediatek.com> Apply this patch and see by yourself. This wasn't tested either, so I will skip review. Best regards, Krzysztof

2 weeks

Re: [PATCH v2 04/13] dt-bindings: media: mediatek: add cam-yuv binding

by Rob Herring (Arm)

On Mon, 07 Jul 2025 09:31:45 +0800, shangyao lin wrote: > From: "shangyao.lin" <shangyao.lin(a)mediatek.com> > > Add camera isp7x module device document. > > --- > > Changes in v2: > - Rename binding file to mediatek,mt8188-cam-yuv.yaml > - Various fixes per review comments > - Update maintainers list > > Signed-off-by: shangyao.lin <shangyao.lin(a)mediatek.com> > --- > .../mediatek/mediatek,mt8188-cam-yuv.yaml | 134 ++++++++++++++++++ > 1 file changed, 134 insertions(+) > create mode 100755 Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-yuv.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-yuv.yaml: properties:reg-names: {'items': [{'const': 'base'}, {'const': 'inner_base'}], 'minItems': 1, 'maxItems': 2, 'description': 'Names for each register region. Must be "base" and optionally "inner_base".'} should not be valid under {'required': ['maxItems']} hint: "maxItems" is not needed with an "items" list from schema $id: http://devicetree.org/meta-schemas/items.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-yuv.yaml: properties:clock-names: {'items': [{'const': 'camsys_cam2mm0_cgpdn'}, {'const': 'camsys_cam2mm1_cgpdn'}, {'const': 'camsys_cam2sys_cgpdn'}, {'const': 'camsys_yuva_larbx'}, {'const': 'camsys_yuva_cam_cgpdn'}, {'const': 'camsys_yuva_camtg_cgpdn'}, {'const': 'camsys_yuvb_larbx_cgpdn'}, {'const': 'camsys_yuvb_cam_cgpdn'}, {'const': 'camsys_yuvb_camtg_cgpdn'}], 'minItems': 4, 'maxItems': 16, 'description': 'Names of the clocks, must match the order of the clocks property.'} should not be valid under {'required': ['maxItems']} hint: "maxItems" is not needed with an "items" list from schema $id: http://devicetree.org/meta-schemas/items.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-yuv.yaml: $id: Cannot determine base path from $id, relative path/filename doesn't match actual path or filename $id: http://devicetree.org/schemas/media/mediatek/mediatek,cam-yuv.yaml file: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-yuv.yaml Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-yuv.example.dts:33.13-43: Warning (reg_format): /example-0/soc/yuv@16050000:reg: property has invalid length (16 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-yuv.example.dts:37.13-59: Warning (dma_ranges_format): /example-0/soc/yuv@16050000:dma-ranges: "dma-ranges" property has invalid length (24 bytes) (parent #address-cells == 2, child #address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-yuv.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-yuv.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-yuv.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-yuv.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-yuv.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-yuv.example.dts:31.24-58.13: Warning (avoid_default_addr_size): /example-0/soc/yuv@16050000: Relying on default #address-cells value Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-yuv.example.dts:31.24-58.13: Warning (avoid_default_addr_size): /example-0/soc/yuv@16050000: Relying on default #size-cells value Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-yuv.example.dtb: Warning (unique_unit_address_if_enabled): Failed prerequisite 'avoid_default_addr_size' /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-yuv.example.dtb: yuv@16050000 (mediatek,mt8188-cam-yuv): clock-names:3: 'camsys_yuva_larbx' was expected from schema $id: http://devicetree.org/schemas/media/mediatek/mediatek,cam-yuv.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-yuv.example.dtb: yuv@16050000 (mediatek,mt8188-cam-yuv): dma-ranges: [[2], [0], [0], [1073741824], [1], [0]] is too long from schema $id: http://devicetree.org/schemas/media/mediatek/mediatek,cam-yuv.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/202507070131… The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.

2 weeks

Re: [PATCH v2 03/13] dt-bindings: media: mediatek: add cam-raw binding

by Rob Herring (Arm)

On Mon, 07 Jul 2025 09:31:44 +0800, shangyao lin wrote: > From: "shangyao.lin" <shangyao.lin(a)mediatek.com> > > Add camera isp7x module device document. > > --- > > Changes in v2: > - Rename binding file to mediatek,mt8188-cam-raw.yaml > - Various fixes per review comments > - Update maintainers list > > Signed-off-by: shangyao.lin <shangyao.lin(a)mediatek.com> > --- > .../mediatek/mediatek,mt8188-cam-raw.yaml | 156 ++++++++++++++++++ > 1 file changed, 156 insertions(+) > create mode 100755 Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: ./Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.yaml:156:4: [error] no new line character at the end of file (new-line-at-end-of-file) dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.yaml: properties:clock-names: {'items': [{'const': 'camsys_cam2mm0_cgpdn'}, {'const': 'camsys_cam2mm1_cgpdn'}, {'const': 'camsys_cam2sys_cgpdn'}, {'const': 'camsys_cam_cgpdn'}, {'const': 'camsys_camtg_cgpdn'}, {'const': 'camsys_rawa_larbx_cgpdn'}, {'const': 'camsys_rawa_cam_cgpdn'}, {'const': 'camsys_rawa_camtg_cgpdn'}, {'const': 'topckgen_top_cam'}, {'const': 'topckgen_top_camtg'}, {'const': 'topckgen_top_camtm'}], 'minItems': 4, 'maxItems': 16, 'description': 'Names of the clocks, must match the order of the clocks property.'} should not be valid under {'required': ['maxItems']} hint: "maxItems" is not needed with an "items" list from schema $id: http://devicetree.org/meta-schemas/items.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.yaml: properties:reg-names: {'items': [{'const': 'base'}, {'const': 'inner_base'}], 'minItems': 1, 'maxItems': 2, 'description': 'Names for each register region. Must be "base" and optionally "inner_base".'} should not be valid under {'required': ['maxItems']} hint: "maxItems" is not needed with an "items" list from schema $id: http://devicetree.org/meta-schemas/items.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.yaml: $id: Cannot determine base path from $id, relative path/filename doesn't match actual path or filename $id: http://devicetree.org/schemas/media/mediatek/mediatek,cam-raw.yaml file: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.yaml Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.example.dts:33.13-34.43: Warning (reg_format): /example-0/soc/raw@16030000:reg: property has invalid length (32 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.example.dts:37.13-59: Warning (dma_ranges_format): /example-0/soc/raw@16030000:dma-ranges: "dma-ranges" property has invalid length (24 bytes) (parent #address-cells == 2, child #address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.example.dts:31.24-78.13: Warning (avoid_default_addr_size): /example-0/soc/raw@16030000: Relying on default #address-cells value Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.example.dts:31.24-78.13: Warning (avoid_default_addr_size): /example-0/soc/raw@16030000: Relying on default #size-cells value Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.example.dtb: Warning (unique_unit_address_if_enabled): Failed prerequisite 'avoid_default_addr_size' /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.example.dtb: raw@16030000 (mediatek,mt8188-cam-raw): dma-ranges: [[2], [0], [0], [1073741824], [1], [0]] is too long from schema $id: http://devicetree.org/schemas/media/mediatek/mediatek,cam-raw.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-cam-raw.example.dtb: raw@16030000 (mediatek,mt8188-cam-raw): reg: [[0, 369295360], [0, 32768], [0, 369328128], [0, 32768]] is too long from schema $id: http://devicetree.org/schemas/media/mediatek/mediatek,cam-raw.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/202507070131… The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.

2 weeks

Re: [PATCH v2 02/13] dt-bindings: media: mediatek: add seninf-core binding

by Rob Herring (Arm)

On Mon, 07 Jul 2025 09:31:43 +0800, shangyao lin wrote: > From: "shangyao.lin" <shangyao.lin(a)mediatek.com> > > 1. Add camera isp7x module device document > > --- > > Changes in v2: > - Rename binding file to mediatek,mt8188-seninf-core.yaml > - Various fixes per review comments > - Update maintainers list > > Question for reviewer (CK): > > Hi CK, > > Thank you for your review and suggestions on this patch, especially for providing the reference patch (https://patchwork.kernel.org/project/linux-mediatek/list/?series=874617) and for mentioning in another patch ([V1,02/10] MEDIA: PLATFORM: MEDIATEK: ADD SENINF CONTROLLER) the suggestion to "Move the phy part to phy/mediatek/ folder. You could refer to phy/mediatek/phy-mtk-mipi-csi-0-5.c". > > After reading your comments and the reference patches, my understanding is that only the seninf-core driver should manage all ports internally, and each port corresponds to a PHY. During probe, the driver will parse each port, obtain the corresponding PHY (e.g., devm_phy_get(dev, "csi0"), devm_phy_get(dev, "csi1"), etc.), and operate the PHY for each port individually during stream on/off or power on/off. > > Could you please confirm if my understanding is correct? > If you have any additional reference patches or examples, I would greatly appreciate it. > > Thank you for your guidance! > > Best regards, > Shangyao > > Signed-off-by: shangyao.lin <shangyao.lin(a)mediatek.com> > --- > .../mediatek/mediatek,mt8188-seninf-core.yaml | 121 ++++++++++++++++++ > 1 file changed, 121 insertions(+) > create mode 100755 Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-seninf-core.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: ./Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-seninf-core.yaml:6:10: [error] string value is redundantly quoted with any quotes (quoted-strings) ./Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-seninf-core.yaml:121:4: [error] no new line character at the end of file (new-line-at-end-of-file) dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-seninf-core.yaml: properties:clock-names: {'items': [{'const': 'clk_cam_seninf'}, {'const': 'clk_top_seninf'}, {'const': 'clk_top_seninf1'}, {'const': 'clk_top_camtm'}], 'minItems': 4, 'maxItems': 4} should not be valid under {'required': ['maxItems']} hint: "maxItems" is not needed with an "items" list from schema $id: http://devicetree.org/meta-schemas/items.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-seninf-core.yaml: properties:clock-names: 'oneOf' conditional failed, one must be fixed: [{'const': 'clk_cam_seninf'}, {'const': 'clk_top_seninf'}, {'const': 'clk_top_seninf1'}, {'const': 'clk_top_camtm'}] is too long [{'const': 'clk_cam_seninf'}, {'const': 'clk_top_seninf'}, {'const': 'clk_top_seninf1'}, {'const': 'clk_top_camtm'}] is too short False schema does not allow 4 1 was expected 4 is greater than the maximum of 2 4 is greater than the maximum of 3 hint: "minItems" is only needed if less than the "items" list length from schema $id: http://devicetree.org/meta-schemas/items.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-seninf-core.yaml: properties:reg-names: {'items': [{'const': 'base'}], 'minItems': 1, 'maxItems': 1} should not be valid under {'required': ['maxItems']} hint: "maxItems" is not needed with an "items" list from schema $id: http://devicetree.org/meta-schemas/items.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-seninf-core.yaml: properties:reg-names: 'oneOf' conditional failed, one must be fixed: [{'const': 'base'}] is too short False schema does not allow 1 hint: "minItems" is only needed if less than the "items" list length from schema $id: http://devicetree.org/meta-schemas/items.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-seninf-core.yaml: properties:reg: 'anyOf' conditional failed, one must be fixed: 'minItems' is not one of ['maxItems', 'description', 'deprecated'] hint: Only "maxItems" is required for a single entry if there are no constraints defined for the values. 'minItems' is not one of ['description', 'deprecated', 'const', 'enum', 'minimum', 'maximum', 'multipleOf', 'default', '$ref', 'oneOf'] 'maxItems' is not one of ['description', 'deprecated', 'const', 'enum', 'minimum', 'maximum', 'multipleOf', 'default', '$ref', 'oneOf'] 1 is less than the minimum of 2 hint: Arrays must be described with a combination of minItems/maxItems/items hint: cell array properties must define how many entries and what the entries are when there is more than one entry. from schema $id: http://devicetree.org/meta-schemas/core.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-seninf-core.yaml: $id: Cannot determine base path from $id, relative path/filename doesn't match actual path or filename $id: http://devicetree.org/schemas/media/mediatek,seninf-core.yaml file: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-seninf-core.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-seninf-core.example.dtb: seninf@16010000 (mediatek,mt8188-seninf-core): reg: [[0, 369164288], [0, 32768]] is too long from schema $id: http://devicetree.org/schemas/media/mediatek,seninf-core.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/202507070131… The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.

2 weeks

Re: [PATCH v2 01/13] dt-bindings: media: mediatek: add camisp binding

by Rob Herring (Arm)

On Mon, 07 Jul 2025 09:31:42 +0800, shangyao lin wrote: > From: "shangyao.lin" <shangyao.lin(a)mediatek.com> > > Add camera isp7x module device document. > > --- > > Changes in v2: > - Rename binding file to mediatek,mt8188-camisp.yaml > - Split bindings into four separate patches (one per YAML file) > - Various fixes per review comments > - Update maintainers list > > Signed-off-by: shangyao.lin <shangyao.lin(a)mediatek.com> > --- > .../mediatek/mediatek,mt8188-camisp.yaml | 68 +++++++++++++++++++ > 1 file changed, 68 insertions(+) > create mode 100755 Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-camisp.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: ./Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-camisp.yaml:68:4: [error] no new line character at the end of file (new-line-at-end-of-file) dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-camisp.yaml: properties:reg-names: {'items': [{'const': 'base'}], 'minItems': 1, 'maxItems': 1, 'description': 'Name for the register region. Must be "base".'} should not be valid under {'required': ['maxItems']} hint: "maxItems" is not needed with an "items" list from schema $id: http://devicetree.org/meta-schemas/items.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-camisp.yaml: properties:reg-names: 'oneOf' conditional failed, one must be fixed: [{'const': 'base'}] is too short False schema does not allow 1 hint: "minItems" is only needed if less than the "items" list length from schema $id: http://devicetree.org/meta-schemas/items.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-camisp.yaml: properties:reg: 'anyOf' conditional failed, one must be fixed: 'minItems' is not one of ['maxItems', 'description', 'deprecated'] hint: Only "maxItems" is required for a single entry if there are no constraints defined for the values. 'minItems' is not one of ['description', 'deprecated', 'const', 'enum', 'minimum', 'maximum', 'multipleOf', 'default', '$ref', 'oneOf'] 'maxItems' is not one of ['description', 'deprecated', 'const', 'enum', 'minimum', 'maximum', 'multipleOf', 'default', '$ref', 'oneOf'] 1 is less than the minimum of 2 hint: Arrays must be described with a combination of minItems/maxItems/items hint: cell array properties must define how many entries and what the entries are when there is more than one entry. from schema $id: http://devicetree.org/meta-schemas/core.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-camisp.yaml: properties:power-domains: 'anyOf' conditional failed, one must be fixed: 'minItems' is not one of ['maxItems', 'description', 'deprecated'] hint: Only "maxItems" is required for a single entry if there are no constraints defined for the values. 'minItems' is not one of ['description', 'deprecated', 'const', 'enum', 'minimum', 'maximum', 'multipleOf', 'default', '$ref', 'oneOf'] 'maxItems' is not one of ['description', 'deprecated', 'const', 'enum', 'minimum', 'maximum', 'multipleOf', 'default', '$ref', 'oneOf'] 1 is less than the minimum of 2 hint: Arrays must be described with a combination of minItems/maxItems/items hint: cell array properties must define how many entries and what the entries are when there is more than one entry. from schema $id: http://devicetree.org/meta-schemas/power-domain.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-camisp.yaml: $id: Cannot determine base path from $id, relative path/filename doesn't match actual path or filename $id: http://devicetree.org/schemas/media/mediatek/mediatek,camisp.yaml file: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-camisp.yaml Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-camisp.example.dts:23.13-43: Warning (reg_format): /example-0/soc/isp@16000000:reg: property has invalid length (16 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-camisp.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-camisp.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-camisp.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-camisp.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-camisp.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-camisp.example.dts:21.24-27.13: Warning (avoid_default_addr_size): /example-0/soc/isp@16000000: Relying on default #address-cells value Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-camisp.example.dts:21.24-27.13: Warning (avoid_default_addr_size): /example-0/soc/isp@16000000: Relying on default #size-cells value Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-camisp.example.dtb: Warning (unique_unit_address_if_enabled): Failed prerequisite 'avoid_default_addr_size' /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek/mediatek,mt8188-camisp.example.dtb: isp@16000000 (mediatek,mt8188-camisp): reg: [[0, 369098752], [0, 4096]] is too long from schema $id: http://devicetree.org/schemas/media/mediatek/mediatek,camisp.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/202507070131… The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.

2 weeks

Re: [PATCH] virtio: Add missing kerneldoc for virtio_dma_buf_attach

by Krzysztof Kozlowski

On 04/07/2025 09:20, jiang.peng9(a)zte.com.cn wrote: > From: Peng Jiang <jiang.peng9(a)zte.com.cn> > > Add kerneldoc for 'virtio_dma_buf_attach' function to fix W=1 warnings: > > drivers/virtio/virtio_dma_buf.c:41 function parameter 'dma_buf' not described in 'virtio_dma_buf_attach' > drivers/virtio/virtio_dma_buf.c:41 function parameter 'attach' not described in 'virtio_dma_buf_attach' > > Signed-off-by: Peng Jiang <jiang.peng9(a)zte.com.cn> > --- > drivers/virtio/virtio_dma_buf.c | 11 ++++++++++- > 1 file changed, 10 insertions(+), 1 deletion(-) > > diff --git a/drivers/virtio/virtio_dma_buf.c b/drivers/virtio/virtio_dma_buf.c > index 3fe1d03b0645..18d261ba5197 100644 > --- a/drivers/virtio/virtio_dma_buf.c > +++ b/drivers/virtio/virtio_dma_buf.c > @@ -35,7 +35,16 @@ struct dma_buf *virtio_dma_buf_export > EXPORT_SYMBOL(virtio_dma_buf_export); > > /** > - * virtio_dma_buf_attach - mandatory attach callback for virtio dma-bufs > + * virtio_dma_buf_attach - Mandatory attach callback for virtio dma-bufs Read kernel-doc.rst. Missing () > + * @dma_buf: Pointer to the shared dma-buf structure > + * @attach: Pointer to the newly created attachment metadata > + * > + * Description: Implements the standard dma-buf attach operation for virtio devices. That's not kerneldoc. Which part of kernel-doc document documents such syntax? > + * Retrieves virtio-specific operations through container_of macro, > + * then invokes device-specific attach callback if present. Best regards, Krzysztof

2 weeks, 3 days

[PATCH] drm/framebuffer: Acquire internal references on GEM handles

by Thomas Zimmermann

Acquire GEM handles in drm_framebuffer_init() and release them in the corresponding drm_framebuffer_cleanup(). Ties the handle's lifetime to the framebuffer. Not all GEM buffer objects have GEM handles. If not set, no refcounting takes place. This is the case for some fbdev emulation. This is not a problem as these GEM objects do not use dma-bufs and drivers will not release them while fbdev emulation is running. As all drivers use drm_framebuffer_init(), they will now all hold dma-buf references as fixed in commit 5307dce878d4 ("drm/gem: Acquire references on GEM handles for framebuffers"). In the GEM framebuffer helpers, restore the original ref counting on buffer objects. As the helpers for handle refcounting are now no longer called from outside the DRM core, unexport the symbols. Gma500 (unnecessarily) clears the framebuffer's GEM-object pointer before calling drm_framebuffer_cleanup(). Remove these lines to make it consistent with the rest of the drivers. It's one of the fbdev emulations with no GEM handle on their buffers. The change to gma500 is therefore rather cosmetic. Tested on i915, amdgpu (by Bert) and gma500. Also tested on i915 plus udl for the original problem with dma-buf sharing. Signed-off-by: Thomas Zimmermann <tzimmermann(a)suse.de> Fixes: 5307dce878d4 ("drm/gem: Acquire references on GEM handles for framebuffers") Reported-by: Bert Karwatzki <spasswolf(a)web.de> Closes: https://lore.kernel.org/dri-devel/20250703115915.3096-1-spasswolf@web.de/ Tested-by: Bert Karwatzki <spasswolf(a)web.de> Cc: Thomas Zimmermann <tzimmermann(a)suse.de> Cc: Anusha Srivatsa <asrivats(a)redhat.com> Cc: Christian König <christian.koenig(a)amd.com> Cc: Maarten Lankhorst <maarten.lankhorst(a)linux.intel.com> Cc: Maxime Ripard <mripard(a)kernel.org> Cc: Sumit Semwal <sumit.semwal(a)linaro.org> Cc: "Christian König" <christian.koenig(a)amd.com> Cc: linux-media(a)vger.kernel.org Cc: dri-devel(a)lists.freedesktop.org Cc: linaro-mm-sig(a)lists.linaro.org Cc: <stable(a)vger.kernel.org> --- drivers/gpu/drm/drm_framebuffer.c | 23 +++++++- drivers/gpu/drm/drm_gem.c | 59 +++++++++++++------- drivers/gpu/drm/drm_gem_framebuffer_helper.c | 16 +++--- drivers/gpu/drm/drm_internal.h | 4 +- drivers/gpu/drm/gma500/fbdev.c | 2 - 5 files changed, 69 insertions(+), 35 deletions(-) diff --git a/drivers/gpu/drm/drm_framebuffer.c b/drivers/gpu/drm/drm_framebuffer.c index b781601946db..e4a10dd053fc 100644 --- a/drivers/gpu/drm/drm_framebuffer.c +++ b/drivers/gpu/drm/drm_framebuffer.c @@ -862,11 +862,17 @@ EXPORT_SYMBOL_FOR_TESTS_ONLY(drm_framebuffer_free); int drm_framebuffer_init(struct drm_device *dev, struct drm_framebuffer *fb, const struct drm_framebuffer_funcs *funcs) { + unsigned int i; int ret; if (WARN_ON_ONCE(fb->dev != dev || !fb->format)) return -EINVAL; + for (i = 0; i < fb->format->num_planes; i++) { + if (fb->obj[i]) + drm_gem_object_handle_get_if_exists_unlocked(fb->obj[i]); + } + INIT_LIST_HEAD(&fb->filp_head); fb->funcs = funcs; @@ -875,7 +881,7 @@ int drm_framebuffer_init(struct drm_device *dev, struct drm_framebuffer *fb, ret = __drm_mode_object_add(dev, &fb->base, DRM_MODE_OBJECT_FB, false, drm_framebuffer_free); if (ret) - goto out; + goto err; mutex_lock(&dev->mode_config.fb_lock); dev->mode_config.num_fb++; @@ -883,7 +889,14 @@ int drm_framebuffer_init(struct drm_device *dev, struct drm_framebuffer *fb, mutex_unlock(&dev->mode_config.fb_lock); drm_mode_object_register(dev, &fb->base); -out: + + return 0; + +err: + for (i = 0; i < fb->format->num_planes; i++) { + if (fb->obj[i]) + drm_gem_object_handle_put_if_exists_unlocked(fb->obj[i]); + } return ret; } EXPORT_SYMBOL(drm_framebuffer_init); @@ -960,6 +973,12 @@ EXPORT_SYMBOL(drm_framebuffer_unregister_private); void drm_framebuffer_cleanup(struct drm_framebuffer *fb) { struct drm_device *dev = fb->dev; + unsigned int i; + + for (i = 0; i < fb->format->num_planes; i++) { + if (fb->obj[i]) + drm_gem_object_handle_put_if_exists_unlocked(fb->obj[i]); + } mutex_lock(&dev->mode_config.fb_lock); list_del(&fb->head); diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c index bc505d938b3e..9d8b9e6b7d25 100644 --- a/drivers/gpu/drm/drm_gem.c +++ b/drivers/gpu/drm/drm_gem.c @@ -224,23 +224,27 @@ static void drm_gem_object_handle_get(struct drm_gem_object *obj) } /** - * drm_gem_object_handle_get_unlocked - acquire reference on user-space handles + * drm_gem_object_handle_get_if_exists_unlocked - acquire reference on user-space handle, if any * @obj: GEM object * - * Acquires a reference on the GEM buffer object's handle. Required - * to keep the GEM object alive. Call drm_gem_object_handle_put_unlocked() - * to release the reference. + * Acquires a reference on the GEM buffer object's handle. Required to keep + * the GEM object alive. Call drm_gem_object_handle_put_if_exists_unlocked() + * to release the reference. Does nothing if the buffer object has no handle. */ -void drm_gem_object_handle_get_unlocked(struct drm_gem_object *obj) +void drm_gem_object_handle_get_if_exists_unlocked(struct drm_gem_object *obj) { struct drm_device *dev = obj->dev; guard(mutex)(&dev->object_name_lock); - drm_WARN_ON(dev, !obj->handle_count); /* first ref taken in create-tail helper */ - drm_gem_object_handle_get(obj); + /* + * First ref taken during GEM object creation, if any. Some + * drivers set up internal framebuffers with GEM objects that + * do not have a GEM handle. Hence, this counter can be zero. + */ + if (obj->handle_count) + drm_gem_object_handle_get(obj); } -EXPORT_SYMBOL(drm_gem_object_handle_get_unlocked); /** * drm_gem_object_handle_free - release resources bound to userspace handles @@ -272,21 +276,11 @@ static void drm_gem_object_exported_dma_buf_free(struct drm_gem_object *obj) } } -/** - * drm_gem_object_handle_put_unlocked - releases reference on user-space handles - * @obj: GEM object - * - * Releases a reference on the GEM buffer object's handle. Possibly releases - * the GEM buffer object and associated dma-buf objects. - */ -void drm_gem_object_handle_put_unlocked(struct drm_gem_object *obj) +static void drm_gem_object_handle_put_unlocked_tail(struct drm_gem_object *obj) { struct drm_device *dev = obj->dev; bool final = false; - if (WARN_ON(READ_ONCE(obj->handle_count) == 0)) - return; - /* * Must bump handle count first as this may be the last * ref, in which case the object would disappear before we @@ -304,7 +298,32 @@ void drm_gem_object_handle_put_unlocked(struct drm_gem_object *obj) if (final) drm_gem_object_put(obj); } -EXPORT_SYMBOL(drm_gem_object_handle_put_unlocked); + +static void drm_gem_object_handle_put_unlocked(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + + if (drm_WARN_ON(dev, READ_ONCE(obj->handle_count) == 0)) + return; + + drm_gem_object_handle_put_unlocked_tail(obj); +} + +/** + * drm_gem_object_handle_put_if_exists_unlocked - releases reference on user-space handle, if any + * @obj: GEM object + * + * Releases a reference on the GEM buffer object's handle. Possibly releases + * the GEM buffer object and associated dma-buf objects. Does nothing if the + * buffer object has no handle. + */ +void drm_gem_object_handle_put_if_exists_unlocked(struct drm_gem_object *obj) +{ + if (!obj->handle_count) + return; + + drm_gem_object_handle_put_unlocked_tail(obj); +} /* * Called at device or object close to release the file's diff --git a/drivers/gpu/drm/drm_gem_framebuffer_helper.c b/drivers/gpu/drm/drm_gem_framebuffer_helper.c index c60d0044d036..618ce725cd75 100644 --- a/drivers/gpu/drm/drm_gem_framebuffer_helper.c +++ b/drivers/gpu/drm/drm_gem_framebuffer_helper.c @@ -100,7 +100,7 @@ void drm_gem_fb_destroy(struct drm_framebuffer *fb) unsigned int i; for (i = 0; i < fb->format->num_planes; i++) - drm_gem_object_handle_put_unlocked(fb->obj[i]); + drm_gem_object_put(fb->obj[i]); drm_framebuffer_cleanup(fb); kfree(fb); @@ -183,10 +183,8 @@ int drm_gem_fb_init_with_funcs(struct drm_device *dev, if (!objs[i]) { drm_dbg_kms(dev, "Failed to lookup GEM object\n"); ret = -ENOENT; - goto err_gem_object_handle_put_unlocked; + goto err_gem_object_put; } - drm_gem_object_handle_get_unlocked(objs[i]); - drm_gem_object_put(objs[i]); min_size = (height - 1) * mode_cmd->pitches[i] + drm_format_info_min_pitch(info, i, width) @@ -196,22 +194,22 @@ int drm_gem_fb_init_with_funcs(struct drm_device *dev, drm_dbg_kms(dev, "GEM object size (%zu) smaller than minimum size (%u) for plane %d\n", objs[i]->size, min_size, i); - drm_gem_object_handle_put_unlocked(objs[i]); + drm_gem_object_put(objs[i]); ret = -EINVAL; - goto err_gem_object_handle_put_unlocked; + goto err_gem_object_put; } } ret = drm_gem_fb_init(dev, fb, mode_cmd, objs, i, funcs); if (ret) - goto err_gem_object_handle_put_unlocked; + goto err_gem_object_put; return 0; -err_gem_object_handle_put_unlocked: +err_gem_object_put: while (i > 0) { --i; - drm_gem_object_handle_put_unlocked(objs[i]); + drm_gem_object_put(objs[i]); } return ret; } diff --git a/drivers/gpu/drm/drm_internal.h b/drivers/gpu/drm/drm_internal.h index f7b414a813ae..9233019f54a8 100644 --- a/drivers/gpu/drm/drm_internal.h +++ b/drivers/gpu/drm/drm_internal.h @@ -161,8 +161,8 @@ void drm_sysfs_lease_event(struct drm_device *dev); /* drm_gem.c */ int drm_gem_init(struct drm_device *dev); -void drm_gem_object_handle_get_unlocked(struct drm_gem_object *obj); -void drm_gem_object_handle_put_unlocked(struct drm_gem_object *obj); +void drm_gem_object_handle_get_if_exists_unlocked(struct drm_gem_object *obj); +void drm_gem_object_handle_put_if_exists_unlocked(struct drm_gem_object *obj); int drm_gem_handle_create_tail(struct drm_file *file_priv, struct drm_gem_object *obj, u32 *handlep); diff --git a/drivers/gpu/drm/gma500/fbdev.c b/drivers/gpu/drm/gma500/fbdev.c index 8edefea2ef59..afd252108cfa 100644 --- a/drivers/gpu/drm/gma500/fbdev.c +++ b/drivers/gpu/drm/gma500/fbdev.c @@ -121,7 +121,6 @@ static void psb_fbdev_fb_destroy(struct fb_info *info) drm_fb_helper_fini(fb_helper); drm_framebuffer_unregister_private(fb); - fb->obj[0] = NULL; drm_framebuffer_cleanup(fb); kfree(fb); @@ -243,7 +242,6 @@ int psb_fbdev_driver_fbdev_probe(struct drm_fb_helper *fb_helper, err_drm_framebuffer_unregister_private: drm_framebuffer_unregister_private(fb); - fb->obj[0] = NULL; drm_framebuffer_cleanup(fb); kfree(fb); err_drm_gem_object_put: -- 2.50.0

2 weeks, 3 days

Re: [PATCH 1/6] drm/sched: Avoid memory leaks with cancel_job() callback

by Maíra Canal

Hi Philipp, On 01/07/25 10:21, Philipp Stanner wrote: > Since its inception, the GPU scheduler can leak memory if the driver > calls drm_sched_fini() while there are still jobs in flight. > > The simplest way to solve this in a backwards compatible manner is by > adding a new callback, drm_sched_backend_ops.cancel_job(), which > instructs the driver to signal the hardware fence associated with the > job. Afterwards, the scheduler can savely use the established free_job() s/savely/safely > callback for freeing the job. > > Implement the new backend_ops callback cancel_job(). > > Suggested-by: Tvrtko Ursulin <tvrtko.ursulin(a)igalia.com> > Link: https://lore.kernel.org/dri-devel/20250418113211.69956-1-tvrtko.ursulin@iga… > Signed-off-by: Philipp Stanner <phasta(a)kernel.org> Reviewed-by: Maíra Canal <mcanal(a)igalia.com> Best Regards, - Maíra

2 weeks, 3 days

Re: Warnings in next-20250703 caused by commit 582111e630f5

by Thomas Zimmermann

Hi Am 03.07.25 um 19:23 schrieb Bert Karwatzki: > Am Donnerstag, dem 03.07.2025 um 18:09 +0200 schrieb Thomas Zimmermann: >> Hi, >> >> before I give up on the issue, could you please test the attached patch? >> >> Best regards >> Thomas >> >> >> -- >> Thomas Zimmermann >> Graphics Driver Developer >> SUSE Software Solutions Germany GmbH >> Frankenstrasse 146, 90461 Nuernberg, Germany >> GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman >> HRB 36809 (AG Nuernberg) > I applied the patch on top of next-20250703 > > $ git log --oneline > 18ee3ed3cb60 (HEAD -> drm_gem_object_handle_put) drm/amdgpu: Provide custom framebuffer destroy function > 8d6c58332c7a (tag: next-20250703, origin/master, origin/HEAD, master) Add linux-next specific files for 20250703 > > and it solves the issue for me (i.e. no warnings). Great, thanks for testing. If nothing else, that's the minimal workaround. Here's another patch, which should solve the problem for all drivers. Could you please revert the old fix and apply the new one and test again? Best regards Thomas > > Bert Karwatzki -- -- Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Frankenstrasse 146, 90461 Nuernberg, Germany GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman HRB 36809 (AG Nuernberg)

2 weeks, 3 days

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Linaro-mm-sig July 2025