Linaro-mm-sig March 2026

linaro-mm-sig@lists.linaro.org

133 participants
1108 discussions

[PATCH v1] i2c: qcom-geni: Skip extra TX DMA TRE for single read message in GPI mode

by Aniket Randive

In GPI mode, the I2C GENI driver incorrectly generates an extra TX DMA TRE on the TX channel during single read message transfer. This results in an unnecessary write operation on the I2C bus, which is not required. Update the logic to avoid generating the extra TX DMA TRE for single read message, ensuring correct behavior and preventing redundant transfers. Co-developed-by: Maramaina Naresh <naresh.maramaina(a)oss.qualcomm.com> Signed-off-by: Maramaina Naresh <naresh.maramaina(a)oss.qualcomm.com> Signed-off-by: Aniket Randive <aniket.randive(a)oss.qualcomm.com> --- drivers/i2c/busses/i2c-qcom-geni.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c index a4acb78fafb6..2706309bbebb 100644 --- a/drivers/i2c/busses/i2c-qcom-geni.c +++ b/drivers/i2c/busses/i2c-qcom-geni.c @@ -625,8 +625,8 @@ static int geni_i2c_gpi(struct geni_i2c_dev *gi2c, struct i2c_msg msgs[], { struct gpi_i2c_config *peripheral; unsigned int flags; - void *dma_buf; - dma_addr_t addr; + void *dma_buf = NULL; + dma_addr_t addr = 0; enum dma_data_direction map_dirn; enum dma_transfer_direction dma_dirn; struct dma_async_tx_descriptor *desc; @@ -639,6 +639,11 @@ static int geni_i2c_gpi(struct geni_i2c_dev *gi2c, struct i2c_msg msgs[], gi2c_gpi_xfer = &gi2c->i2c_multi_desc_config; msg_idx = gi2c_gpi_xfer->msg_idx_cnt; + if (op == I2C_WRITE && msgs[msg_idx].flags & I2C_M_RD) { + peripheral->multi_msg = true; + goto skip_dma; + } + dma_buf = i2c_get_dma_safe_msg_buf(&msgs[msg_idx], 1); if (!dma_buf) { ret = -ENOMEM; @@ -668,6 +673,7 @@ static int geni_i2c_gpi(struct geni_i2c_dev *gi2c, struct i2c_msg msgs[], flags = DMA_PREP_INTERRUPT | DMA_CTRL_ACK; } +skip_dma: /* set the length as message for rx txn */ peripheral->rx_len = msgs[msg_idx].len; peripheral->op = op; @@ -740,9 +746,11 @@ static int geni_i2c_gpi(struct geni_i2c_dev *gi2c, struct i2c_msg msgs[], return 0; err_config: - dma_unmap_single(gi2c->se.dev->parent, addr, - msgs[msg_idx].len, map_dirn); - i2c_put_dma_safe_msg_buf(dma_buf, &msgs[msg_idx], false); + if (op == I2C_WRITE && (msgs[msg_idx].flags & I2C_M_RD)) { + dma_unmap_single(gi2c->se.dev->parent, addr, + msgs[msg_idx].len, map_dirn); + i2c_put_dma_safe_msg_buf(dma_buf, &msgs[msg_idx], false); + } out: gi2c->err = ret; --- base-commit: 785f0eb2f85decbe7c1ef9ae922931f0194ffc2e change-id: 20260325-skip_extra_dma_tre-a3cf22f81d9b Best regards, -- Aniket Randive <aniket.randive(a)oss.qualcomm.com>

2 months

[PATCH v2] dma/contiguous: Fix broken build

by Maxime Ripard

Commit 3a236f6a5cf2 ("dma: contiguous: Turn heap registration logic around") didn't remove one last call to dma_heap_cma_register_heap() that it removed, thus breaking the build. That last call is in dma_contiguous_reserve(), to handle the registration of the default CMA region heap instance. The default CMA region instance is already somewhat handled by retrieving it through the dev_get_cma_area() call in the CMA heap driver. However, since commit 854acbe75ff4 ("dma-buf: heaps: Give default CMA heap a fixed name"), we will create two heap instances for the CMA default region. The first one is always called "default_cma_region", and is the one handled by the call to dev_get_cma_area() mentioned earlier. The second one is the name it used to have prior to that last commit for backward compatibility. In the case where the default CMA region is defined in the DT, then that region is registered through rmem_cma_setup() and that region is added to the list of CMA regions to create a CMA heap instance for. In the case where the default CMA region is not defined in the DT though used to be the case covered by the now removed dma_heap_cma_register_heap() in dma_contiguous_reserve(). If we only remove the call to dma_heap_cma_register_heap(), then the legacy name of the CMA heap will not be registered anymore. We thus need to replace that call with a call to rmem_cma_insert_area() to make sure we queue this instance, if created, to create a heap instance. Once that call to dma_heap_cma_register_heap() replaced, we can also remove the now unused function definition, its now empty header, and all includes of this header. Fixes: 3a236f6a5cf2 ("dma: contiguous: Turn heap registration logic around") Reported-by: Mark Brown <broonie(a)kernel.org> Closes: https://lore.kernel.org/linux-next/acbjaDJ1a-YQC64d@sirena.co.uk/ Signed-off-by: Maxime Ripard <mripard(a)kernel.org> --- Changes in v2: - Fix creation of the CMA heap instance with the legacy name when not declared in the DT. - Link to v1: https://lore.kernel.org/r/20260330-dma-build-fix-v1-1-748b64f0d8af@kernel.o… --- drivers/dma-buf/heaps/cma_heap.c | 1 - include/linux/dma-buf/heaps/cma.h | 16 ---------------- kernel/dma/contiguous.c | 14 +++++++++++--- 3 files changed, 11 insertions(+), 20 deletions(-) diff --git a/drivers/dma-buf/heaps/cma_heap.c b/drivers/dma-buf/heaps/cma_heap.c index 7216a14262b04bb6130ddf26b7d009f7d15b03fd..9a8b36bc929f6daa483a0139a2919d95127e0d23 100644 --- a/drivers/dma-buf/heaps/cma_heap.c +++ b/drivers/dma-buf/heaps/cma_heap.c @@ -12,11 +12,10 @@ #define pr_fmt(fmt) "cma_heap: " fmt #include <linux/cma.h> #include <linux/dma-buf.h> -#include <linux/dma-buf/heaps/cma.h> #include <linux/dma-heap.h> #include <linux/dma-map-ops.h> #include <linux/err.h> #include <linux/highmem.h> #include <linux/io.h> diff --git a/include/linux/dma-buf/heaps/cma.h b/include/linux/dma-buf/heaps/cma.h deleted file mode 100644 index e751479e21e703e24a5f799b4a7fc8bd0df3c1c4..0000000000000000000000000000000000000000 --- a/include/linux/dma-buf/heaps/cma.h +++ /dev/null @@ -1,16 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef DMA_BUF_HEAP_CMA_H_ -#define DMA_BUF_HEAP_CMA_H_ - -struct cma; - -#ifdef CONFIG_DMABUF_HEAPS_CMA -int dma_heap_cma_register_heap(struct cma *cma); -#else -static inline int dma_heap_cma_register_heap(struct cma *cma) -{ - return 0; -} -#endif // CONFIG_DMABUF_HEAPS_CMA - -#endif // DMA_BUF_HEAP_CMA_H_ diff --git a/kernel/dma/contiguous.c b/kernel/dma/contiguous.c index ad50512d71d3088a73e4b1ac02d6e6122374888e..d5d15983060c5c54744d6a63f2b591e1a3455b86 100644 --- a/kernel/dma/contiguous.c +++ b/kernel/dma/contiguous.c @@ -40,11 +40,10 @@ #include <asm/page.h> #include <linux/memblock.h> #include <linux/err.h> #include <linux/sizes.h> -#include <linux/dma-buf/heaps/cma.h> #include <linux/dma-map-ops.h> #include <linux/cma.h> #include <linux/nospec.h> #ifdef CONFIG_CMA_SIZE_MBYTES @@ -217,10 +216,19 @@ static void __init dma_numa_cma_reserve(void) static inline void __init dma_numa_cma_reserve(void) { } #endif +#ifdef CONFIG_OF_RESERVED_MEM +static int rmem_cma_insert_area(struct cma *cma); +#else +static inline int rmem_cma_insert_area(struct cma *cma) +{ + return 0; +} +#endif + /** * dma_contiguous_reserve() - reserve area(s) for contiguous memory handling * @limit: End address of the reserved memory (optional, 0 for any). * * This function reserves memory from early allocator. It should be @@ -271,13 +279,13 @@ void __init dma_contiguous_reserve(phys_addr_t limit) &dma_contiguous_default_area, fixed); if (ret) return; - ret = dma_heap_cma_register_heap(dma_contiguous_default_area); + ret = rmem_cma_insert_area(dma_contiguous_default_area); if (ret) - pr_warn("Couldn't register default CMA heap."); + pr_warn("Couldn't queue default CMA region for heap creation."); } } void __weak dma_contiguous_early_fixup(phys_addr_t base, unsigned long size) --- base-commit: 6c683d5b1903a14e362c9f1628ce9fe61eac35e7 change-id: 20260330-dma-build-fix-706a4feb0e0f Best regards, -- Maxime Ripard <mripard(a)kernel.org>

2 months

[PATCH] dma-buf/udmabuf: skip redundant cpu sync to fix cacheline EEXIST warning

by Mikhail Gavrilov

When CONFIG_DMA_API_DEBUG_SG is enabled, importing a udmabuf into a DRM driver (e.g. amdgpu for video playback in GNOME Videos / Showtime) triggers a spurious warning: DMA-API: amdgpu 0000:03:00.0: cacheline tracking EEXIST, \ overlapping mappings aren't supported WARNING: kernel/dma/debug.c:619 at add_dma_entry+0x473/0x5f0 The call chain is: amdgpu_cs_ioctl -> amdgpu_ttm_backend_bind -> dma_buf_map_attachment -> [udmabuf] map_udmabuf -> get_sg_table -> dma_map_sgtable(dev, sg, direction, 0) // attrs=0 -> debug_dma_map_sg -> add_dma_entry -> EEXIST This happens because udmabuf builds a per-page scatter-gather list via sg_set_folio(). When begin_cpu_udmabuf() has already created an sg table mapped for the misc device, and an importer such as amdgpu maps the same pages for its own device via map_udmabuf(), the DMA debug infrastructure sees two active mappings whose physical addresses share cacheline boundaries and warns about the overlap. The DMA_ATTR_SKIP_CPU_SYNC flag suppresses this check in add_dma_entry() because it signals that no CPU cache maintenance is performed at map/unmap time, making the cacheline overlap harmless. All other major dma-buf exporters already pass this flag: - drm_gem_map_dma_buf() passes DMA_ATTR_SKIP_CPU_SYNC - amdgpu_dma_buf_map() passes DMA_ATTR_SKIP_CPU_SYNC The CPU sync at map/unmap time is also redundant for udmabuf: begin_cpu_udmabuf() and end_cpu_udmabuf() already perform explicit cache synchronization via dma_sync_sgtable_for_cpu/device() when CPU access is requested through the dma-buf interface. Pass DMA_ATTR_SKIP_CPU_SYNC to dma_map_sgtable() and dma_unmap_sgtable() in udmabuf to suppress the spurious warning and skip the redundant sync. Fixes: 284562e1f348 ("udmabuf: implement begin_cpu_access/end_cpu_access hooks") Cc: stable(a)vger.kernel.org Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov(a)gmail.com> --- drivers/dma-buf/udmabuf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/dma-buf/udmabuf.c b/drivers/dma-buf/udmabuf.c index 94b8ecb892bb..9c6f8785a28a 100644 --- a/drivers/dma-buf/udmabuf.c +++ b/drivers/dma-buf/udmabuf.c @@ -162,7 +162,7 @@ static struct sg_table *get_sg_table(struct device *dev, struct dma_buf *buf, sg_set_folio(sgl, ubuf->folios[i], PAGE_SIZE, ubuf->offsets[i]); - ret = dma_map_sgtable(dev, sg, direction, 0); + ret = dma_map_sgtable(dev, sg, direction, DMA_ATTR_SKIP_CPU_SYNC); if (ret < 0) goto err_map; return sg; @@ -177,7 +177,7 @@ static struct sg_table *get_sg_table(struct device *dev, struct dma_buf *buf, static void put_sg_table(struct device *dev, struct sg_table *sg, enum dma_data_direction direction) { - dma_unmap_sgtable(dev, sg, direction, 0); + dma_unmap_sgtable(dev, sg, direction, DMA_ATTR_SKIP_CPU_SYNC); sg_free_table(sg); kfree(sg); } -- 2.53.0

2 months

[PATCH v9 0/7] Rust bindings for gem shmem

by Lyude Paul

This is the next version of the shmem backed GEM objects series originally from Asahi, previously posted by Daniel Almeida. The previous version of the patch series can be found here: https://patchwork.freedesktop.org/series/156093/ This patch series may be applied on top of the driver-core/driver-core-testing branch: https://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core.git… Changelogs are per-patch Asahi Lina (2): rust: helpers: Add bindings/wrappers for dma_resv_lock rust: drm: gem: shmem: Add DRM shmem helper abstraction Lyude Paul (5): rust: drm: Add gem::impl_aref_for_gem_obj! rust: drm: gem: Add raw_dma_resv() function rust: gem: Introduce DriverObject::Args rust: drm: gem: Introduce shmem::SGTable rust: drm/gem: Add vmap functions to shmem bindings drivers/gpu/drm/nova/gem.rs | 5 +- drivers/gpu/drm/tyr/gem.rs | 3 +- rust/bindings/bindings_helper.h | 3 + rust/helpers/dma-resv.c | 13 + rust/helpers/drm.c | 56 ++- rust/helpers/helpers.c | 1 + rust/kernel/drm/gem/mod.rs | 79 +++- rust/kernel/drm/gem/shmem.rs | 654 ++++++++++++++++++++++++++++++++ 8 files changed, 792 insertions(+), 22 deletions(-) create mode 100644 rust/helpers/dma-resv.c create mode 100644 rust/kernel/drm/gem/shmem.rs base-commit: dc33ae50d32b509af5ae61030912fa20c79ef112 prerequisite-patch-id: c631986f96e2073263e97e82a65b96fc5ada6924 prerequisite-patch-id: ae853e8eb8d58c77881371960be4ae92755e83c6 prerequisite-patch-id: 0ab78b50648c7d8f66b83c32ed2af0ec3ede42a3 prerequisite-patch-id: 636ec7f913f4047e5e1a1788f3e835b7259698c2 prerequisite-patch-id: d75e4d7140eadeeed8017af8cd093bfd2766ee8e prerequisite-patch-id: 67a8010c1bc95bca1d2cf6b246c67bc79d24e766 -- 2.53.0

2 months

[PATCH RESEND] dma-fence: Dereference correct dma_fence in dma_fence_chain_find_seqno()

by Li Ming

dma_fence_chain_find_seqno() uses dma_fence_chain_for_each() to walk a given dma_fence_chain. dma_fence_chain_for_each() always holds a reference for the current fence during iteration. The reference must be dropped after breaking out. Instead of dereferencing the last fence as intended, dma_fence_chain_find_seqno() incorrectly dereferences the first fence in the chain. Fixes: 7bf60c52e093 ("dma-buf: add new dma_fence_chain container v7") Signed-off-by: Li Ming <ming.li(a)zohomail.com> --- drivers/dma-buf/dma-fence-chain.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma-buf/dma-fence-chain.c b/drivers/dma-buf/dma-fence-chain.c index a8a90acf4f34..71fa173aef13 100644 --- a/drivers/dma-buf/dma-fence-chain.c +++ b/drivers/dma-buf/dma-fence-chain.c @@ -103,7 +103,7 @@ int dma_fence_chain_find_seqno(struct dma_fence **pfence, uint64_t seqno) to_dma_fence_chain(*pfence)->prev_seqno < seqno) break; } - dma_fence_put(&chain->base); + dma_fence_put(*pfence); return 0; } --- base-commit: c369299895a591d96745d6492d4888259b004a9e change-id: 20260327-fix_dma_fence_chain_find_seqno-7adea64efe01 Best regards, -- Li Ming <ming.li(a)zohomail.com>

2 months

[PATCH] dma/contiguous: Fix broken build

by Maxime Ripard

2 months

Expertise in Recovery

by penelopestaunton931＠gmail.com

Safeguard is not just another name in the crowded field of cryptocurrency recovery; they are renowned for their effectiveness and expertise in tracing lost funds. Their team comprises skilled professionals who understand the intricate workings of blockchain technology and the tactics employed by online scammers. This specialized knowledge enables them to devise tailored strategies to recover your assets. Email: safeguardbitcoin(a)consultant.com WhatsApp: +44 7426 168300 Website: https://safeguardbitcoin.wixsite.com/safeguard-bitcoin--1

2 months

Why Choose Betafort Recovery

by brandonbarry676＠gmail.com

With professionalism and integrity, Betafort Recovery assures that their clients get the finest possible help in retrieving their lost digital assets. With a staff of professionals dedicated to assisting individuals in navigating the recovery process, they provide 24 hour support to guarantee that customers receive timely and effective assistance when they need it the most. Testimonials from delighted clients demonstrate Betafort Recovery abilities in recovering lost digital assets, emphasizing their dedication to client satisfaction and good outcomes. NO UPFRONT FEES REQUIRED. Online presence: Betafort Recovery

2 months

[PATCH] dma-fence: Dereference correct dma_fence in dma_fence_chain_find_seqno()

by Li Ming

2 months

(no subject)

by Johnson Henry

The Best Crypto recovery Expert Consult Ghost Mystery Recovery Hacker The best cryptocurrency recovery service,is well-known for its meticulous method of retrieving lost or stolen cryptocurrencies. ghost mystery recovery hacker recovery uses forensic investigations and state-of-the-art blockchain analytics techniques to locate and help victims recover their stolen digital assets. Its team includes professionals, who concentrate on regulatory Email address: support(a)ghostmysteryrecovery.com WhatsApp on +44 7480 061765 Website;https://ghostmysteryrecovery.com

2 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Linaro-mm-sig March 2026