Linaro-mm-sig May 2026

linaro-mm-sig@lists.linaro.org

107 participants
351 discussions

[PATCH v2 00/10] dma-bug: heaps: Add Tegra VPR support

by Thierry Reding

From: Thierry Reding <treding(a)nvidia.com> Hi, This series adds support for the video protection region (VPR) used on Tegra SoC devices. It's a special region of memory that is protected from accesses by the CPU and used to store DRM protected content (both decrypted stream data as well as decoded video frames). Patches 1 and 2 add DT binding documentation for the VPR and add the VPR to the list of memory-region items for display and host1x. Patch 3 adds bitmap_allocate(), which is like bitmap_allocate_region() but works on sizes that are not a power of two. Patch 4 introduces new APIs needed by the Tegra VPR implementation that allow CMA areas to be dynamically created at runtime rather than using the fixed, system-wide list. This is used in this driver specifically because it can use an arbitrary number of these areas (though they are currently limited to 4). Patch 5 adds some infrastructure for DMA heap implementations to provide information through debugfs. The Tegra VPR implementation is added in patch 6. See its commit message for more details about the specifics of this implementation. Finally, patches 7-10 add the VPR placeholder node on Tegra234 and hook it up to the host1x and GPU nodes so that they can make use of this region. Changes in v2: - Tegra VPR implementation is now more optimized to reduce the number of (very slow) resize operations, and allows cross-chunk allocations - dynamic CMA areas are now trackd separately from static ones, but the global number of CMA pages accounts for all areas Thierry Thierry Reding (10): dt-bindings: reserved-memory: Document Tegra VPR dt-bindings: display: tegra: Document memory regions bitmap: Add bitmap_allocate() function mm/cma: Allow dynamically creating CMA areas dma-buf: heaps: Add debugfs support dma-buf: heaps: Add support for Tegra VPR arm64: tegra: Add VPR placeholder node on Tegra234 arm64: tegra: Add GPU node on Tegra234 arm64: tegra: Hook up VPR to host1x arm64: tegra: Hook up VPR to the GPU .../display/tegra/nvidia,tegra186-dc.yaml | 10 + .../display/tegra/nvidia,tegra20-dc.yaml | 10 +- .../display/tegra/nvidia,tegra20-host1x.yaml | 7 + .../nvidia,tegra-video-protection-region.yaml | 55 + arch/arm/mm/dma-mapping.c | 2 +- arch/arm64/boot/dts/nvidia/tegra234.dtsi | 60 + arch/s390/mm/init.c | 2 +- drivers/dma-buf/dma-heap.c | 56 + drivers/dma-buf/heaps/Kconfig | 7 + drivers/dma-buf/heaps/Makefile | 1 + drivers/dma-buf/heaps/cma_heap.c | 2 +- drivers/dma-buf/heaps/tegra-vpr.c | 1265 +++++++++++++++++ include/linux/bitmap.h | 25 +- include/linux/cma.h | 7 +- include/linux/dma-heap.h | 2 + include/trace/events/tegra_vpr.h | 57 + mm/cma.c | 187 ++- mm/cma.h | 5 +- 18 files changed, 1713 insertions(+), 47 deletions(-) create mode 100644 Documentation/devicetree/bindings/reserved-memory/nvidia,tegra-video-protection-region.yaml create mode 100644 drivers/dma-buf/heaps/tegra-vpr.c create mode 100644 include/trace/events/tegra_vpr.h -- 2.52.0

2 months, 4 weeks

[PATCH] dma-buf/dma_fence_array: optimize handling v2

by Christian König

Removing the signal on any feature allows to simplfy the dma_fence_array code a lot and saves us from the need to install a callback on all fences at the same time. This results is less memory and CPU overhead. v2: fix potential double locking pointed out by Tvrtko Signed-off-by: Christian König <christian.koenig(a)amd.com> --- drivers/dma-buf/dma-fence-array.c | 134 +++++++++++++----------------- drivers/gpu/drm/xe/xe_vm.c | 2 +- include/linux/dma-fence-array.h | 22 ++--- 3 files changed, 66 insertions(+), 92 deletions(-) diff --git a/drivers/dma-buf/dma-fence-array.c b/drivers/dma-buf/dma-fence-array.c index 5e10e8df372f..8b94c6287482 100644 --- a/drivers/dma-buf/dma-fence-array.c +++ b/drivers/dma-buf/dma-fence-array.c @@ -42,97 +42,88 @@ static void dma_fence_array_clear_pending_error(struct dma_fence_array *array) cmpxchg(&array->base.error, PENDING_ERROR, 0); } -static void irq_dma_fence_array_work(struct irq_work *wrk) +static void dma_fence_array_cb_func(struct dma_fence *f, + struct dma_fence_cb *cb) { - struct dma_fence_array *array = container_of(wrk, typeof(*array), work); - - dma_fence_array_clear_pending_error(array); + struct dma_fence_array *array = + container_of(cb, struct dma_fence_array, callback); - dma_fence_signal(&array->base); - dma_fence_put(&array->base); + irq_work_queue(&array->work); } -static void dma_fence_array_cb_func(struct dma_fence *f, - struct dma_fence_cb *cb) +static bool dma_fence_array_try_add_cb(struct dma_fence_array *array) { - struct dma_fence_array_cb *array_cb = - container_of(cb, struct dma_fence_array_cb, cb); - struct dma_fence_array *array = array_cb->array; + while (array->num_pending) { + struct dma_fence *f = array->fences[array->num_pending - 1]; - dma_fence_array_set_pending_error(array, f->error); + if (!dma_fence_add_callback(f, &array->callback, + dma_fence_array_cb_func)) + return true; - if (atomic_dec_and_test(&array->num_pending)) - irq_work_queue(&array->work); - else + dma_fence_array_set_pending_error(array, f->error); + --array->num_pending; + } + return false; +} + +static void dma_fence_array_irq_work(struct irq_work *wrk) +{ + struct dma_fence_array *array = container_of(wrk, typeof(*array), work); + + --array->num_pending; + if (!dma_fence_array_try_add_cb(array)) { + dma_fence_signal(&array->base); dma_fence_put(&array->base); + } } static bool dma_fence_array_enable_signaling(struct dma_fence *fence) { struct dma_fence_array *array = to_dma_fence_array(fence); - struct dma_fence_array_cb *cb = array->callbacks; - unsigned i; - for (i = 0; i < array->num_fences; ++i) { - cb[i].array = array; + /* + * As we may report that the fence is signaled before all + * callbacks are complete, we need to take an additional + * reference count on the array so that we do not free it too + * early. The core fence handling will only hold the reference + * until we signal the array as complete (but that is now + * insufficient). + */ + dma_fence_get(&array->base); + if (!dma_fence_array_try_add_cb(array)) { /* - * As we may report that the fence is signaled before all - * callbacks are complete, we need to take an additional - * reference count on the array so that we do not free it too - * early. The core fence handling will only hold the reference - * until we signal the array as complete (but that is now - * insufficient). + * When all fences are already signaled we can drop the reference again + * and report to the caller that the array can be signaled as well. */ - dma_fence_get(&array->base); - if (dma_fence_add_callback(array->fences[i], &cb[i].cb, - dma_fence_array_cb_func)) { - int error = array->fences[i]->error; - - dma_fence_array_set_pending_error(array, error); - dma_fence_put(&array->base); - if (atomic_dec_and_test(&array->num_pending)) { - dma_fence_array_clear_pending_error(array); - return false; - } - } + dma_fence_put(&array->base); + return false; } - return true; } static bool dma_fence_array_signaled(struct dma_fence *fence) { struct dma_fence_array *array = to_dma_fence_array(fence); - int num_pending; + int num_pending, error = 0; unsigned int i; /* - * We need to read num_pending before checking the enable_signal bit - * to avoid racing with the enable_signaling() implementation, which - * might decrement the counter, and cause a partial check. - * atomic_read_acquire() pairs with atomic_dec_and_test() in - * dma_fence_array_enable_signaling() - * - * The !--num_pending check is here to account for the any_signaled case - * if we race with enable_signaling(), that means the !num_pending check - * in the is_signalling_enabled branch might be outdated (num_pending - * might have been decremented), but that's fine. The user will get the - * right value when testing again later. + * Reading num_pending without a memory barrier here is correct since + * that is only for optimization, it is perfectly acceptable to have a + * stale value for it. In all other cases num_pending is accessed by a + * single call chain. */ - num_pending = atomic_read_acquire(&array->num_pending); - if (test_bit(DMA_FENCE_FLAG_ENABLE_SIGNAL_BIT, &array->base.flags)) { - if (num_pending <= 0) - goto signal; - return false; - } + num_pending = READ_ONCE(array->num_pending); + for (i = 0; i < num_pending; ++i) { + struct dma_fence *f = array->fences[i]; - for (i = 0; i < array->num_fences; ++i) { - if (dma_fence_is_signaled(array->fences[i]) && !--num_pending) - goto signal; - } - return false; + if (!dma_fence_is_signaled(f)) + return false; -signal: + if (!error) + error = f->error; + } + dma_fence_array_set_pending_error(array, error); dma_fence_array_clear_pending_error(array); return true; } @@ -171,15 +162,12 @@ EXPORT_SYMBOL(dma_fence_array_ops); /** * dma_fence_array_alloc - Allocate a custom fence array - * @num_fences: [in] number of fences to add in the array * * Return dma fence array on success, NULL on failure */ -struct dma_fence_array *dma_fence_array_alloc(int num_fences) +struct dma_fence_array *dma_fence_array_alloc(void) { - struct dma_fence_array *array; - - return kzalloc_flex(*array, callbacks, num_fences); + return kzalloc_obj(struct dma_fence_array); } EXPORT_SYMBOL(dma_fence_array_alloc); @@ -203,10 +191,13 @@ void dma_fence_array_init(struct dma_fence_array *array, WARN_ON(!num_fences || !fences); array->num_fences = num_fences; + array->num_pending = num_fences; + array->fences = fences; + array->base.error = PENDING_ERROR; dma_fence_init(&array->base, &dma_fence_array_ops, NULL, context, seqno); - init_irq_work(&array->work, irq_dma_fence_array_work); + init_irq_work(&array->work, dma_fence_array_irq_work); /* * dma_fence_array_enable_signaling() is invoked while holding @@ -220,11 +211,6 @@ void dma_fence_array_init(struct dma_fence_array *array, */ lockdep_set_class(&array->base.inline_lock, &dma_fence_array_lock_key); - atomic_set(&array->num_pending, num_fences); - array->fences = fences; - - array->base.error = PENDING_ERROR; - /* * dma_fence_array objects should never contain any other fence * containers or otherwise we run into recursion and potential kernel @@ -265,7 +251,7 @@ struct dma_fence_array *dma_fence_array_create(int num_fences, { struct dma_fence_array *array; - array = dma_fence_array_alloc(num_fences); + array = dma_fence_array_alloc(); if (!array) return NULL; diff --git a/drivers/gpu/drm/xe/xe_vm.c b/drivers/gpu/drm/xe/xe_vm.c index 62a87a051be7..8f472911469d 100644 --- a/drivers/gpu/drm/xe/xe_vm.c +++ b/drivers/gpu/drm/xe/xe_vm.c @@ -3370,7 +3370,7 @@ static struct dma_fence *ops_execute(struct xe_vm *vm, goto err_trace; } - cf = dma_fence_array_alloc(n_fence); + cf = dma_fence_array_alloc(); if (!cf) { fence = ERR_PTR(-ENOMEM); goto err_out; diff --git a/include/linux/dma-fence-array.h b/include/linux/dma-fence-array.h index 1b1d87579c38..3ee55c0e2fa4 100644 --- a/include/linux/dma-fence-array.h +++ b/include/linux/dma-fence-array.h @@ -15,16 +15,6 @@ #include <linux/dma-fence.h> #include <linux/irq_work.h> -/** - * struct dma_fence_array_cb - callback helper for fence array - * @cb: fence callback structure for signaling - * @array: reference to the parent fence array object - */ -struct dma_fence_array_cb { - struct dma_fence_cb cb; - struct dma_fence_array *array; -}; - /** * struct dma_fence_array - fence to represent an array of fences * @base: fence base class @@ -33,18 +23,17 @@ struct dma_fence_array_cb { * @num_pending: fences in the array still pending * @fences: array of the fences * @work: internal irq_work function - * @callbacks: array of callback helpers + * @callback: callback structure for signaling */ struct dma_fence_array { struct dma_fence base; - unsigned num_fences; - atomic_t num_pending; + unsigned int num_fences; + unsigned int num_pending; struct dma_fence **fences; struct irq_work work; - - struct dma_fence_array_cb callbacks[] __counted_by(num_fences); + struct dma_fence_cb callback; }; /** @@ -78,11 +67,10 @@ to_dma_fence_array(struct dma_fence *fence) for (index = 0, fence = dma_fence_array_first(head); fence; \ ++(index), fence = dma_fence_array_next(head, index)) -struct dma_fence_array *dma_fence_array_alloc(int num_fences); +struct dma_fence_array *dma_fence_array_alloc(void); void dma_fence_array_init(struct dma_fence_array *array, int num_fences, struct dma_fence **fences, u64 context, unsigned seqno); - struct dma_fence_array *dma_fence_array_create(int num_fences, struct dma_fence **fences, u64 context, unsigned seqno); -- 2.43.0

2 months, 4 weeks

BUY REAL PASSPORT, DRIVERS LICENSE, VISA, GREEN CARD, ID CARD, SCHOOL CERTIFICAT

by jameswalkes0987＠gmail.com

Genuine Passports, Driver's licenses And Other Documents Of All Countries For Sale. Buy High Quality Data-based Registered Machine Read-able Scan-able Driver's Licenses, ID's, Passports, And Citizenship Documents. Buy Real Passports, Driver's License, ID Cards, Visas, USA Green Card, Fake Money. We are the best producers of genuine Data-based Registered High Quality Real/Fake Passport, Driver's Licenses, ID Card's And other Citizenship Documents. Buy High Quality Data-based Registered Machine Read-able Scan-able Driver's Licenses, ID's, Passports, And Citizenship Documents. Buy Real Passports, Driver's License, ID Cards, Visas, USA Green Card, Fake Money. Email : jameswalkes0987(a)gmail.com What's app:+237 677480749 Tell:+237 677480749 We are the best producers of genuine high quality fake documents. Buy Fake Passport British(UK) For Sale Diplomatic Canadian False ID Cards Online United States(US) Fake ID Card Sell Driver's License. Buy genuine Green card Training certificates, GCSE, A-levels, High School Diploma Certificates ,GMAT, MCAT, and LSAT examination Certificates and credit cards, school diplomas, school degrees all in an entirely new name issued and registered in the government's data-base system. Welcome To David Wilson and Associates Network. Get A second Chance In Life with Wesley Hover and Associates , protect your privacy, build new credit history, by-pass criminal background checks, take back your freedom. It's a cruise, you have come to the right place for all your travel needs and guest what !!!! you're going to finally make your dream a reality. Let us help you plan the ideal trip for you if you would like to find out more about the services we have available. We are an Association responsible for the production of real genuine passports, Real Genuine Data-Base Registered Fake Passports and other Citizenship documents. I can guarantee you a new Identity starting from a clean new genuine Birth Certificate, ID card, Drivers License, Passports, Social security card with SSN, credit files can you imagine ?? WE DO OFFER LEGITIMATE'S SERVICE: .GET REGISTERED BRITISH PASSPORT. .REGISTERED CANADIAN PASSPORT. .REGISTERED FRENCH PASSPORT. .REGISTERED AMERICAN PASSPORT. .REGISTERED USA PASSPORT. .REGISTERED PASSPORT FOR COUNTRIES IN THE EUROPEAN UNION. We offer a service to help you through to meet your goals, we can help you with: Getting real government issued ID under another identity(NEW NAMES), A new social security number (verifiable with the SSA), Checking and saving accounts for your new ID. Credit cards Relocation Passports, Diplomatic passports, novelty passports. Production and obtaining new identification documents. We also do work permit and bank statements and have connections to OFFER JOBS in country like Dubai, USA , CANADA , UK ,China,Peru,Brazil,South Africa,Denmark,Sweden,Norway,France etc.. Tourist and business visa services available to residents of all 50 states and all nationalities Worldwide INTERESTED TO BUY REAL GENUINE QUALITY BANKNOTES of Euros, Dollars and Pounds ??? with security feature magnetic ink, water marks, the pen test, and the security strip that by-pass machines. Our hundreds carry "color-shifting ink," an advanced feature that gives the money an appearance of changing color when held at different angles including Intaglio. Coaching services available.... Not even an expertise custom official or machine can ever dictate the document we offer as fake, since the document is no different from Real government issued! Email : jameswalkes0987(a)gmail.com What's app:+237 677480749 Tell:+237 677480749 E-Mail Your Questions and Comments. We are looking forward to receiving your inquiries and early receipt of your first orders!

3 months

[PATCH] dma-buf: system_heap: Optimize sg_table-to-pages conversion in vmap

by Barry Song (Xiaomi)

From: Xueyuan Chen <Xueyuan.chen21(a)gmail.com> Replace the heavy for_each_sgtable_page() iterator in system_heap_do_vmap() with a more efficient nested loop approach. Instead of iterating page by page, we now iterate through the scatterlist entries via for_each_sgtable_sg(). Because pages within a single sg entry are physically contiguous, we can populate the page array with a in an inner loop using simple pointer math. This save a lot of time. The WARN_ON check is also pulled out of the loop to save branch instructions. Performance results mapping a 2GB buffer on Radxa O6: - Before: ~1440000 ns - After: ~232000 ns (~84% reduction in iteration time, or ~6.2x faster) Cc: Sumit Semwal <sumit.semwal(a)linaro.org> Cc: Benjamin Gaignard <benjamin.gaignard(a)collabora.com> Cc: Brian Starkey <Brian.Starkey(a)arm.com> Cc: John Stultz <jstultz(a)google.com> Cc: T.J. Mercier <tjmercier(a)google.com> Cc: Christian König <christian.koenig(a)amd.com> Signed-off-by: Xueyuan Chen <Xueyuan.chen21(a)gmail.com> Signed-off-by: Barry Song (Xiaomi) <baohua(a)kernel.org> --- drivers/dma-buf/heaps/system_heap.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/dma-buf/heaps/system_heap.c b/drivers/dma-buf/heaps/system_heap.c index b3650d8fd651..769f01f0cc96 100644 --- a/drivers/dma-buf/heaps/system_heap.c +++ b/drivers/dma-buf/heaps/system_heap.c @@ -224,16 +224,21 @@ static void *system_heap_do_vmap(struct system_heap_buffer *buffer) int npages = PAGE_ALIGN(buffer->len) / PAGE_SIZE; struct page **pages = vmalloc(sizeof(struct page *) * npages); struct page **tmp = pages; - struct sg_page_iter piter; void *vaddr; + u32 i, j, count; + struct page *base_page; + struct scatterlist *sg; if (!pages) return ERR_PTR(-ENOMEM); - for_each_sgtable_page(table, &piter, 0) { - WARN_ON(tmp - pages >= npages); - *tmp++ = sg_page_iter_page(&piter); + for_each_sgtable_sg(table, sg, i) { + base_page = sg_page(sg); + count = sg->length >> PAGE_SHIFT; + for (j = 0; j < count; j++) + *tmp++ = base_page + j; } + WARN_ON(tmp - pages != npages); vaddr = vmap(pages, npages, VM_MAP, PAGE_KERNEL); vfree(pages); -- 2.39.3 (Apple Git-146)

3 months

Re: Regression due to /sys/kernel/dmabuf/buffers removal

by T.J. Mercier

On Tue, May 5, 2026 at 6:00 AM Julian Orth <ju.orth(a)gmail.com> wrote: > > On Tue, May 5, 2026 at 2:41 PM Christian König <christian.koenig(a)amd.com> wrote: > > > > Hi Julian, > > > > On 5/5/26 14:25, Julian Orth wrote: > > > In ab4c3dcf9a71582503b4fb25aeab884c696cab25 ("dma-buf: Remove DMA-BUF > > > sysfs stats") the /sys/kernel/dmabuf/buffer directory was removed. > > > > > > I've been using this interface, specifically the exporter_name file, > > > to detect dmabufs created via udmabuf. Such dmabufs show "udmabuf" in > > > exporter_name. I've been doing this for two reasons: 1) to detect that > > > mmap on such buffers will be fast and 2) to detect that GPU access to > > > such buffers will be slow. > > > > Crap, I really hoped that Android was the only user of that sysfs interface since that approach turned out to be quite broken. > > > > It's number one rule on Linux that we don't break userspace. So I hope that you don't insist on bringing that interface back, but if you do I will just revert the removal until we found a better solution. > > Bringing it back shouldn't be necessary. > > > > > > With the removal of that file, that detection mechanism no longer works. > > > > > > I'm not particularly fond of that mechanism but it was the only one > > > providing that functionality that I could find at the time. If there > > > is another one, ideally an ioctl on the dmabuf, please let me know. > > > > The virtual fdinfo file you can find under /proc/$pid/fdinfo/$fd also contains the exporter name for the DMA-buf. > > > > You can find the full documentation here: https://docs.kernel.org/filesystems/proc.html#dma-buffer-files > > > > Is that sufficient? > > I think that is sufficient. I probably didn't use fdinfo initially > because 1) it's a lot more work to parse and 2) I wasn't sure if it > was intended to be machine-readable or if there could sometimes be > newlines in the values and such. > > > > > Additional to that the debugfs for DMA-buf also contains that information and I'm open to the suggestion with the IOCTL. > > My application runs as a regular user so it cannot access /sys/kernel/debug. > > Having an IOCTL would be ideal if it is not too much work. I'll fall > back to fdinfo for now. > > Thanks, Julian Phew, I'm glad fdinfo suits your needs. Adding an ioctl would introduce new UAPI so I think we'd want to avoid that unless absolutely necessary. Thanks, T.J. > > > > Regards, > > Christian. > > > > > > > > Shipping an entire BPF compiler in my application, which the original > > > patch suggests as the replacement, is not an option when the removed > > > alternative was simply reading a file. > > > > > > Thanks, Julian > >

3 months

Regression due to /sys/kernel/dmabuf/buffers removal

by Julian Orth

In ab4c3dcf9a71582503b4fb25aeab884c696cab25 ("dma-buf: Remove DMA-BUF sysfs stats") the /sys/kernel/dmabuf/buffer directory was removed. I've been using this interface, specifically the exporter_name file, to detect dmabufs created via udmabuf. Such dmabufs show "udmabuf" in exporter_name. I've been doing this for two reasons: 1) to detect that mmap on such buffers will be fast and 2) to detect that GPU access to such buffers will be slow. With the removal of that file, that detection mechanism no longer works. I'm not particularly fond of that mechanism but it was the only one providing that functionality that I could find at the time. If there is another one, ideally an ioctl on the dmabuf, please let me know. Shipping an entire BPF compiler in my application, which the original patch suggests as the replacement, is not an option when the removed alternative was simply reading a file. Thanks, Julian

3 months

If you have been a victim of a crypto scam, i strongly advise you to reach out to Ghost Champion Recovery.

by blainefraaza＠gmail.com

Acting quickly can dramatically increase the chances of successful retrieval. If you’ve lost your crypto to a scam or accidental transfer, don’t wait another day hoping the situation will resolve itself. Take proactive steps and work with a team that has a proven history of delivering results. Ghost Champion Recovery Experts is ready to help you reclaim what is rightfully yours. No matter how complex your case may seem, their specialists will assess your situation honestly and provide a clear roadmap toward recovery. You deserve peace of mind and the confidence that your financial future can be restored. Contact Ghost Champion Recovery Experts today and take the first step toward recovering your lost cryptocurrency: Telegram: https://t.me/WizardGhosthacker Email:ghostchampionwizard@gmail.com Website : https://stellamariaqueen03.wixsite.com/-ghost-champion-wiza Don’t let scammers win. Join thousands of others who have trusted GHOST CHAMPION HACKER to retrieve their stolen assets and rebuild their financial security. Your recovery journey starts here.

3 months

If you have been a victim of a crypto scam, i strongly advise you to reach out to Ghost Champion Recovery.

by blainefraaza＠gmail.com

3 months

[PATCH 1/2] dma-buf/dma_fence_array: remove unused functionality v3

by Christian König

Amdgpu was the only user of the signal on any feature and we dropped that use case recently, so we can remove that functionality. v2: update num_pending only after the fence is signaled v3: separate out simplifying dma_fence_array implementation Signed-off-by: Christian König <christian.koenig(a)amd.com> --- drivers/dma-buf/dma-fence-array.c | 13 ++++--------- drivers/dma-buf/dma-fence-unwrap.c | 3 +-- drivers/dma-buf/dma-resv.c | 3 +-- drivers/dma-buf/st-dma-fence-unwrap.c | 2 +- drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c | 3 +-- drivers/gpu/drm/xe/xe_sync.c | 2 +- drivers/gpu/drm/xe/xe_vm.c | 4 ++-- include/linux/dma-fence-array.h | 6 ++---- 8 files changed, 13 insertions(+), 23 deletions(-) diff --git a/drivers/dma-buf/dma-fence-array.c b/drivers/dma-buf/dma-fence-array.c index 089f69469524..5e10e8df372f 100644 --- a/drivers/dma-buf/dma-fence-array.c +++ b/drivers/dma-buf/dma-fence-array.c @@ -190,15 +190,13 @@ EXPORT_SYMBOL(dma_fence_array_alloc); * @fences: [in] array containing the fences * @context: [in] fence context to use * @seqno: [in] sequence number to use - * @signal_on_any: [in] signal on any fence in the array * * Implementation of @dma_fence_array_create without allocation. Useful to init * a preallocated dma fence array in the path of reclaim or dma fence signaling. */ void dma_fence_array_init(struct dma_fence_array *array, int num_fences, struct dma_fence **fences, - u64 context, unsigned seqno, - bool signal_on_any) + u64 context, unsigned seqno) { static struct lock_class_key dma_fence_array_lock_key; @@ -222,7 +220,7 @@ void dma_fence_array_init(struct dma_fence_array *array, */ lockdep_set_class(&array->base.inline_lock, &dma_fence_array_lock_key); - atomic_set(&array->num_pending, signal_on_any ? 1 : num_fences); + atomic_set(&array->num_pending, num_fences); array->fences = fences; array->base.error = PENDING_ERROR; @@ -249,7 +247,6 @@ EXPORT_SYMBOL(dma_fence_array_init); * @fences: [in] array containing the fences * @context: [in] fence context to use * @seqno: [in] sequence number to use - * @signal_on_any: [in] signal on any fence in the array * * Allocate a dma_fence_array object and initialize the base fence with * dma_fence_init(). @@ -264,8 +261,7 @@ EXPORT_SYMBOL(dma_fence_array_init); */ struct dma_fence_array *dma_fence_array_create(int num_fences, struct dma_fence **fences, - u64 context, unsigned seqno, - bool signal_on_any) + u64 context, unsigned seqno) { struct dma_fence_array *array; @@ -273,8 +269,7 @@ struct dma_fence_array *dma_fence_array_create(int num_fences, if (!array) return NULL; - dma_fence_array_init(array, num_fences, fences, - context, seqno, signal_on_any); + dma_fence_array_init(array, num_fences, fences, context, seqno); return array; } diff --git a/drivers/dma-buf/dma-fence-unwrap.c b/drivers/dma-buf/dma-fence-unwrap.c index 07fe9bf45aea..53bb40e70b27 100644 --- a/drivers/dma-buf/dma-fence-unwrap.c +++ b/drivers/dma-buf/dma-fence-unwrap.c @@ -180,8 +180,7 @@ struct dma_fence *__dma_fence_unwrap_merge(unsigned int num_fences, if (count > 1) { result = dma_fence_array_create(count, array, - dma_fence_context_alloc(1), - 1, false); + dma_fence_context_alloc(1), 1); if (!result) { for (i = 0; i < count; i++) dma_fence_put(array[i]); diff --git a/drivers/dma-buf/dma-resv.c b/drivers/dma-buf/dma-resv.c index ce9e6c04897f..39a92d9f2413 100644 --- a/drivers/dma-buf/dma-resv.c +++ b/drivers/dma-buf/dma-resv.c @@ -648,8 +648,7 @@ int dma_resv_get_singleton(struct dma_resv *obj, enum dma_resv_usage usage, } array = dma_fence_array_create(count, fences, - dma_fence_context_alloc(1), - 1, false); + dma_fence_context_alloc(1), 1); if (!array) { while (count--) dma_fence_put(fences[count]); diff --git a/drivers/dma-buf/st-dma-fence-unwrap.c b/drivers/dma-buf/st-dma-fence-unwrap.c index 51c87869b7b8..4e7ee25372ba 100644 --- a/drivers/dma-buf/st-dma-fence-unwrap.c +++ b/drivers/dma-buf/st-dma-fence-unwrap.c @@ -64,7 +64,7 @@ static struct dma_fence *mock_array(unsigned int num_fences, ...) array = dma_fence_array_create(num_fences, fences, dma_fence_context_alloc(1), - 1, false); + 1); if (!array) goto error_free; return &array->base; diff --git a/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c index 942f4eed817f..4a1a9031f9db 100644 --- a/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c @@ -3205,8 +3205,7 @@ eb_composite_fence_create(struct i915_execbuffer *eb, int out_fence_fd) fence_array = dma_fence_array_create(eb->num_batches, fences, eb->context->parallel.fence_context, - eb->context->parallel.seqno++, - false); + eb->context->parallel.seqno++); if (!fence_array) { kfree(fences); return ERR_PTR(-ENOMEM); diff --git a/drivers/gpu/drm/xe/xe_sync.c b/drivers/gpu/drm/xe/xe_sync.c index 24d6d9af20d6..37866768d64c 100644 --- a/drivers/gpu/drm/xe/xe_sync.c +++ b/drivers/gpu/drm/xe/xe_sync.c @@ -376,7 +376,7 @@ xe_sync_in_fence_get(struct xe_sync_entry *sync, int num_sync, xe_assert(vm->xe, current_fence == num_fence); cf = dma_fence_array_create(num_fence, fences, dma_fence_context_alloc(1), - 1, false); + 1); if (!cf) goto err_out; diff --git a/drivers/gpu/drm/xe/xe_vm.c b/drivers/gpu/drm/xe/xe_vm.c index 56e2db50bb36..8f472911469d 100644 --- a/drivers/gpu/drm/xe/xe_vm.c +++ b/drivers/gpu/drm/xe/xe_vm.c @@ -3370,7 +3370,7 @@ static struct dma_fence *ops_execute(struct xe_vm *vm, goto err_trace; } - cf = dma_fence_array_alloc(n_fence); + cf = dma_fence_array_alloc(); if (!cf) { fence = ERR_PTR(-ENOMEM); goto err_out; @@ -3414,7 +3414,7 @@ static struct dma_fence *ops_execute(struct xe_vm *vm, xe_assert(vm->xe, current_fence == n_fence); dma_fence_array_init(cf, n_fence, fences, dma_fence_context_alloc(1), - 1, false); + 1); fence = &cf->base; for_each_tile(tile, vm->xe, id) { diff --git a/include/linux/dma-fence-array.h b/include/linux/dma-fence-array.h index 370b3d2bba37..1b1d87579c38 100644 --- a/include/linux/dma-fence-array.h +++ b/include/linux/dma-fence-array.h @@ -81,13 +81,11 @@ to_dma_fence_array(struct dma_fence *fence) struct dma_fence_array *dma_fence_array_alloc(int num_fences); void dma_fence_array_init(struct dma_fence_array *array, int num_fences, struct dma_fence **fences, - u64 context, unsigned seqno, - bool signal_on_any); + u64 context, unsigned seqno); struct dma_fence_array *dma_fence_array_create(int num_fences, struct dma_fence **fences, - u64 context, unsigned seqno, - bool signal_on_any); + u64 context, unsigned seqno); bool dma_fence_match_context(struct dma_fence *fence, u64 context); -- 2.43.0

3 months

Re: [PATCH v11 08/11] tee: add Qualcomm TEE driver

by Dmitry Baryshkov

On Wed, Sep 10, 2025 at 08:41:21PM -0700, Amirreza Zarrabi wrote: > Introduce qcomtee_object, which represents an object in both QTEE and > the kernel. QTEE clients can invoke an instance of qcomtee_object to > access QTEE services. If this invocation produces a new object in QTEE, > an instance of qcomtee_object will be returned. > > Similarly, QTEE can request services from by issuing a callback > request, which invokes an instance of qcomtee_object. > > Implement initial support for exporting qcomtee_object to userspace > and QTEE, enabling the invocation of objects hosted in QTEE and userspace > through the TEE subsystem. > > Tested-by: Neil Armstrong <neil.armstrong(a)linaro.org> > Tested-by: Harshal Dev <quic_hdev(a)quicinc.com> > Acked-by: Sumit Garg <sumit.garg(a)oss.qualcomm.com> > Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi(a)oss.qualcomm.com> > --- > MAINTAINERS | 6 + > drivers/tee/Kconfig | 1 + > drivers/tee/Makefile | 1 + > drivers/tee/qcomtee/Kconfig | 12 + > drivers/tee/qcomtee/Makefile | 7 + > drivers/tee/qcomtee/async.c | 182 +++++++ > drivers/tee/qcomtee/call.c | 813 +++++++++++++++++++++++++++++++ > drivers/tee/qcomtee/core.c | 906 +++++++++++++++++++++++++++++++++++ > drivers/tee/qcomtee/qcomtee.h | 143 ++++++ > drivers/tee/qcomtee/qcomtee_msg.h | 304 ++++++++++++ > drivers/tee/qcomtee/qcomtee_object.h | 316 ++++++++++++ > drivers/tee/qcomtee/shm.c | 153 ++++++ > drivers/tee/qcomtee/user_obj.c | 692 ++++++++++++++++++++++++++ > include/uapi/linux/tee.h | 1 + > 14 files changed, 3537 insertions(+) > > + > +static int > +qcomtee_object_invoke_ctx_invoke(struct qcomtee_object_invoke_ctx *oic, > + int *result, u64 *res_type) > +{ > + phys_addr_t out_msg_paddr; > + phys_addr_t in_msg_paddr; > + int ret; > + u64 res; > + > + tee_shm_get_pa(oic->out_shm, 0, &out_msg_paddr); > + tee_shm_get_pa(oic->in_shm, 0, &in_msg_paddr); > + if (!(oic->flags & QCOMTEE_OIC_FLAG_BUSY)) > + ret = qcom_scm_qtee_invoke_smc(in_msg_paddr, oic->in_msg.size, > + out_msg_paddr, oic->out_msg.size, > + &res, res_type); > + else > + ret = qcom_scm_qtee_callback_response(out_msg_paddr, > + oic->out_msg.size, > + &res, res_type); > + > + if (ret) > + pr_err("QTEE returned with %d.\n", ret); > + else > + *result = (int)res; After enablign QCOMTEE driver, I observe the following error during the bootup on RB3 Gen2: [ 4.720777] qcomtee: QTEE returned with -22. [ 4.725251] qcomtee: QTEE version 0.0.0 > + > + return ret; > +} > + -- With best wishes Dmitry

3 months

← Newer
1
...
22
23
24
25
26
27
28
...
36
Older →

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Linaro-mm-sig May 2026