On 1/14/26 2:46 AM, Tomeu Vizoso wrote:
This memory region is used by the DRM/accel driver to allocate addresses for buffers that are used for communication with the DSP cores and for their intermediate results.
Signed-off-by: Tomeu Vizoso tomeu@tomeuvizoso.net
arch/arm64/boot/dts/ti/k3-j722s-ti-ipc-firmware.dtsi | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j722s-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-j722s-ti-ipc-firmware.dtsi index 3fbff927c4c08bce741555aa2753a394b751144f..b80d2a5a157ad59eaed8e57b22f1f4bce4765a85 100644 --- a/arch/arm64/boot/dts/ti/k3-j722s-ti-ipc-firmware.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j722s-ti-ipc-firmware.dtsi @@ -42,6 +42,11 @@ c7x_0_memory_region: memory@a3100000 { no-map; };
- c7x_iova_pool: iommu-pool@a7000000 {
reg = <0x00 0xa7000000 0x00 0x18200000>;no-map;
Could you expand on why this carveout is needed? The C7 NPU has a full MMU and should be able to work with any buffer Linux allocates from any address, even non-contiguous buffers too.
Communication should already happen over the existing RPMSG channels without needing extra buffers. And space for intermediate results should be provided dynamically by the drivers (I believe that would match how GPUs without dedicated memory handle getting intermediate buffers space from system memory these days, but do correct me if I'm wrong about that one).
Andrew
- };
- c7x_1_dma_memory_region: memory@a4000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa4000000 0x00 0x100000>;
@@ -151,13 +156,15 @@ &main_r5fss0_core0 { &c7x_0 { mboxes = <&mailbox0_cluster2 &mbox_c7x_0>; memory-region = <&c7x_0_dma_memory_region>,
<&c7x_0_memory_region>;
<&c7x_0_memory_region>,<&c7x_iova_pool>;&c7x_1 { mboxes = <&mailbox0_cluster3 &mbox_c7x_1>; memory-region = <&c7x_1_dma_memory_region>,
<&c7x_1_memory_region>;
<&c7x_1_memory_region>,<&c7x_iova_pool>;