Hi,
[Now with a Gstreamer demo, see below.]
This patch set allocates the restricted DMA-bufs via the TEE subsystem.
The TEE subsystem handles the DMA-buf allocations since it is the TEE (OP-TEE, AMD-TEE, TS-TEE, or perhaps a future QCOMTEE) which sets up the restrictions for the memory used for the DMA-bufs.
I've added a new IOCTL, TEE_IOC_RSTMEM_ALLOC, to allocate the restricted DMA-bufs. This IOCTL reaches the backend TEE driver, allowing it to choose how to allocate the restricted physical memory.
TEE_IOC_RSTMEM_ALLOC takes in addition to a size and flags parameters also a use-case parameter. This is used by the backend TEE driver to decide on allocation policy and which devices should be able to access the memory.
Three use-cases (Secure Video Playback, Trusted UI, and Secure Video Recording) has been identified so far to serve as examples of what can be expected. More use-cases can be added in userspace ABI, but it's up to the backend TEE drivers to provide the implementation.
Each use-case has it's own restricted memory pool since different use-cases requires isolation from different parts of the system. A restricted memory pool can be based on a static carveout instantiated while probing the TEE backend driver, or dynamically allocated from CMA and made restricted as needed by the TEE.
This can be tested on a RockPi 4B+ with the following steps: repo init -u https://github.com/jenswi-linaro/manifest.git -m rockpi4.xml \ -b prototype/sdp-v5 repo sync -j8 cd build make toolchains -j$(nproc) make all -j$(nproc) # Copy ../out/rockpi4.img to an SD card and boot the RockPi from that # Connect a monitor to the RockPi # login and at the prompt: gst-launch-1.0 videotestsrc ! \ aesenc key=1f9423681beb9a79215820f6bda73d0f \ iv=e9aa8e834d8d70b7e0d254ff670dd718 serialize-iv=true ! \ aesdec key=1f9423681beb9a79215820f6bda73d0f ! \ kmssink
The aesdec module has been hacked to use an OP-TEE TA to decrypt the stream into restricted DMA-bufs which are consumed by the kmssink.
The primitive QEMU tests from previous patch set can be tested on RockPi in the same way with: xtest --sdp-basic
The primitive test are tested on QEMU with the following steps: repo init -u https://github.com/jenswi-linaro/manifest.git -m qemu_v8.xml \ -b prototype/sdp-v5 repo sync -j8 cd build make toolchains -j$(nproc) make SPMC_AT_EL=1 all -j$(nproc) make SPMC_AT_EL=1 run-only # login and at the prompt: xtest --sdp-basic
The SPMC_AT_EL=1 parameter configures the build with FF-A and an SPMC at S-EL1 inside OP-TEE. The parameter can be changed into SPMC_AT_EL=n to test without FF-A using the original SMC ABI instead. Please remember to do %rm -rf ../trusted-firmware-a/build/qemu for TF-A to be rebuilt properly using the new configuration.
https://optee.readthedocs.io/en/latest/building/prerequisites.html list dependencies needed to build the above.
The tests are pretty basic, mostly checking that a Trusted Application in the secure world can access and manipulate the memory. There are also some negative tests for out of bounds buffers etc.
Thanks, Jens
Changes since V4: * Adding the patch "tee: add TEE_IOC_RSTMEM_FD_INFO" needed by the GStreamer demo * Removing the dummy CPU access and mmap functions from the dma_buf_ops * Fixing a compile error in "optee: FF-A: dynamic restricted memory allocation" reported by kernel test robot lkp@intel.com
Changes since V3: * Make the use_case and flags field in struct tee_shm u32's instead of u16's * Add more description for TEE_IOC_RSTMEM_ALLOC in the header file * Import namespace DMA_BUF in module tee, reported by lkp@intel.com * Added a note in the commit message for "optee: account for direction while converting parameters" why it's needed * Factor out dynamic restricted memory allocation from "optee: support restricted memory allocation" into two new commits "optee: FF-A: dynamic restricted memory allocation" and "optee: smc abi: dynamic restricted memory allocation" * Guard CMA usage with #ifdef CONFIG_CMA, effectively disabling dynamic restricted memory allocate if CMA isn't configured
Changes since the V2 RFC: * Based on v6.12 * Replaced the flags for SVP and Trusted UID memory with a u32 field with unique id for each use case * Added dynamic allocation of restricted memory pools * Added OP-TEE ABI both with and without FF-A for dynamic restricted memory * Added support for FF-A with FFA_LEND
Changes since the V1 RFC: * Based on v6.11 * Complete rewrite, replacing the restricted heap with TEE_IOC_RSTMEM_ALLOC
Changes since Olivier's post [2]: * Based on Yong Wu's post [1] where much of dma-buf handling is done in the generic restricted heap * Simplifications and cleanup * New commit message for "dma-buf: heaps: add Linaro restricted dmabuf heap support" * Replaced the word "secure" with "restricted" where applicable
Jens Wiklander (7): tee: add restricted memory allocation tee: add TEE_IOC_RSTMEM_FD_INFO optee: account for direction while converting parameters optee: sync secure world ABI headers optee: support restricted memory allocation optee: FF-A: dynamic restricted memory allocation optee: smc abi: dynamic restricted memory allocation
drivers/tee/Makefile | 1 + drivers/tee/optee/Makefile | 1 + drivers/tee/optee/call.c | 10 +- drivers/tee/optee/core.c | 1 + drivers/tee/optee/ffa_abi.c | 179 +++++++++++++- drivers/tee/optee/optee_ffa.h | 27 ++- drivers/tee/optee/optee_msg.h | 65 ++++- drivers/tee/optee/optee_private.h | 75 ++++-- drivers/tee/optee/optee_smc.h | 71 +++++- drivers/tee/optee/rpc.c | 31 ++- drivers/tee/optee/rstmem.c | 389 ++++++++++++++++++++++++++++++ drivers/tee/optee/smc_abi.c | 215 +++++++++++++++-- drivers/tee/tee_core.c | 69 +++++- drivers/tee/tee_private.h | 4 + drivers/tee/tee_rstmem.c | 188 +++++++++++++++ drivers/tee/tee_shm.c | 2 + drivers/tee/tee_shm_pool.c | 69 +++++- include/linux/tee_core.h | 15 ++ include/linux/tee_drv.h | 2 + include/uapi/linux/tee.h | 71 +++++- 20 files changed, 1409 insertions(+), 76 deletions(-) create mode 100644 drivers/tee/optee/rstmem.c create mode 100644 drivers/tee/tee_rstmem.c
base-commit: a64dcfb451e254085a7daee5fe51bf22959d52d3