On Tue, 19 Dec 2023 18:50:01 +0100 Paul Cercueil paul@crapouillou.net wrote:
[V4 was: "iio: Add buffer write() support"][1]
Hi Jonathan,
Hi Paul,
This is a respin of the V3 of my patchset that introduced a new interface based on DMABUF objects [2].
Great to see this moving forwards.
The V4 was a split of the patchset, to attempt to upstream buffer write() support first. But since there is no current user upstream, it was not merged. This V5 is about doing the opposite, and contains the new DMABUF interface, without adding the buffer write() support. It can already be used with the upstream adi-axi-adc driver.
Seems like a sensible path in the short term.
In user-space, Libiio uses it to transfer back and forth blocks of samples between the hardware and the applications, without having to copy the data.
On a ZCU102 with a FMComms3 daughter board, running Libiio from the pcercuei/dev-new-dmabuf-api branch [3], compiled with WITH_LOCAL_DMABUF_API=OFF (so that it uses fileio): sudo utils/iio_rwdev -b 4096 -B cf-ad9361-lpc Throughput: 116 MiB/s
Same hardware, with the DMABUF API (WITH_LOCAL_DMABUF_API=ON): sudo utils/iio_rwdev -b 4096 -B cf-ad9361-lpc Throughput: 475 MiB/s
This benchmark only measures the speed at which the data can be fetched to iio_rwdev's internal buffers, and does not actually try to read the data (e.g. to pipe it to stdout). It shows that fetching the data is more than 4x faster using the new interface.
When actually reading the data, the performance difference isn't that impressive (maybe because in case of DMABUF the data is not in cache):
This needs a bit more investigation ideally. Perhaps perf counters can be used to establish that cache misses are the main different between dropping it on the floor and actually reading the data.
WITH_LOCAL_DMABUF_API=OFF (so that it uses fileio): sudo utils/iio_rwdev -b 4096 cf-ad9361-lpc | dd of=/dev/zero status=progress 2446422528 bytes (2.4 GB, 2.3 GiB) copied, 22 s, 111 MB/s
WITH_LOCAL_DMABUF_API=ON: sudo utils/iio_rwdev -b 4096 cf-ad9361-lpc | dd of=/dev/zero status=progress 2334388736 bytes (2.3 GB, 2.2 GiB) copied, 21 s, 114 MB/s
One interesting thing to note is that fileio is (currently) actually faster than the DMABUF interface if you increase a lot the buffer size. My explanation is that the cache invalidation routine takes more and more time the bigger the DMABUF gets. This is because the DMABUF is backed by small-size pages, so a (e.g.) 64 MiB DMABUF is backed by up to 16 thousands pages, that have to be invalidated one by one. This can be addressed by using huge pages, but the udmabuf driver does not (yet) support creating DMABUFs backed by huge pages.
I'd imagine folios of reasonable size will help sort of a huge page as then hopefully it will use the flush by va range instructions if available.
Anyway, the real benefits happen when the DMABUFs are either shared between IIO devices, or between the IIO subsystem and another filesystem. In that case, the DMABUFs are simply passed around drivers, without the data being copied at any moment.
We use that feature to transfer samples from our transceivers to USB, using a DMABUF interface to FunctionFS [4].
This drastically increases the throughput, to about 274 MiB/s over a USB3 link, vs. 127 MiB/s using IIO's fileio interface + write() to the FunctionFS endpoints, for a lower CPU usage (0.85 vs. 0.65 load avg.).
This is a nice example. Where are you with getting the patch merged?
Overall, this code looks fine to me, though there are some parts that need review by other maintainers (e.g. Vinod for the dmaengine callback) and I'd like a 'looks fine' at least form those who know a lot more about dmabuf than I do.
To actually make this useful sounds like either udmabuf needs some perf improvements, or there has to be an upstream case of sharing it without something else (e.g your functionfs patches). So what do we need to get in before the positive benefit becomes worth carrying this extra complexity? (which isn't too bad so I'm fine with a small benefit and promises of riches :)
Jonathan
Based on linux-next/next-20231219.
Cheers, -Paul
[1] https://lore.kernel.org/all/20230807112113.47157-1-paul@crapouillou.net/ [2] https://lore.kernel.org/all/20230403154800.215924-1-paul@crapouillou.net/ [3] https://github.com/analogdevicesinc/libiio/tree/pcercuei/dev-new-dmabuf-api [4] https://lore.kernel.org/all/20230322092118.9213-1-paul@crapouillou.net/
Changelog:
[3/8]: Replace V3's dmaengine_prep_slave_dma_array() with a new dmaengine_prep_slave_dma_vec(), which uses a new 'dma_vec' struct. Note that at some point we will need to support cyclic transfers using dmaengine_prep_slave_dma_vec(). Maybe with a new "flags" parameter to the function?
[4/8]: Implement .device_prep_slave_dma_vec() instead of V3's .device_prep_slave_dma_array().
@Vinod: this patch will cause a small conflict with my other patchset adding scatter-gather support to the axi-dmac driver. This patch adds a call to axi_dmac_alloc_desc(num_sgs), but the prototype of this function changed in my other patchset - it would have to be passed the "chan" variable. I don't know how you prefer it to be resolved. Worst case scenario (and if @Jonathan is okay with that) this one patch can be re-sent later, but it would make this patchset less "atomic".
[5/8]:
- Use dev_err() instead of pr_err()
- Inline to_iio_dma_fence()
- Add comment to explain why we unref twice when detaching dmabuf
- Remove TODO comment. It is actually safe to free the file's private data even when transfers are still pending because it won't be accessed.
- Fix documentation of new fields in struct iio_buffer_access_funcs
- iio_dma_resv_lock() does not need to be exported, make it static
[7/8]:
- Use the new dmaengine_prep_slave_dma_vec().
- Restrict to input buffers, since output buffers are not yet supported by IIO buffers.
[8/8]: Use description lists for the documentation of the three new IOCTLs instead of abusing subsections.
Alexandru Ardelean (1): iio: buffer-dma: split iio_dma_buffer_fileio_free() function
Paul Cercueil (7): iio: buffer-dma: Get rid of outgoing queue dmaengine: Add API function dmaengine_prep_slave_dma_vec() dmaengine: dma-axi-dmac: Implement device_prep_slave_dma_vec iio: core: Add new DMABUF interface infrastructure iio: buffer-dma: Enable support for DMABUFs iio: buffer-dmaengine: Support new DMABUF based userspace API Documentation: iio: Document high-speed DMABUF based API
Documentation/iio/dmabuf_api.rst | 54 +++ Documentation/iio/index.rst | 2 + drivers/dma/dma-axi-dmac.c | 40 ++ drivers/iio/buffer/industrialio-buffer-dma.c | 242 ++++++++--- .../buffer/industrialio-buffer-dmaengine.c | 52 ++- drivers/iio/industrialio-buffer.c | 402 ++++++++++++++++++ include/linux/dmaengine.h | 25 ++ include/linux/iio/buffer-dma.h | 33 +- include/linux/iio/buffer_impl.h | 26 ++ include/uapi/linux/iio/buffer.h | 22 + 10 files changed, 836 insertions(+), 62 deletions(-) create mode 100644 Documentation/iio/dmabuf_api.rst