Depending of the board configuration i2c for ddc could change, this patch allow to use a phandle to specify which i2c controller to use.
Signed-off-by: Benjamin Gaignard benjamin.gaignard@linaro.org --- .../devicetree/bindings/gpu/st,stih4xx.txt | 1 + drivers/gpu/drm/sti/sti_hdmi.c | 40 +++++++++++++++------- drivers/gpu/drm/sti/sti_hdmi.h | 1 + 3 files changed, 29 insertions(+), 13 deletions(-)
diff --git a/Documentation/devicetree/bindings/gpu/st,stih4xx.txt b/Documentation/devicetree/bindings/gpu/st,stih4xx.txt index 2d150c3..8885d9e 100644 --- a/Documentation/devicetree/bindings/gpu/st,stih4xx.txt +++ b/Documentation/devicetree/bindings/gpu/st,stih4xx.txt @@ -69,6 +69,7 @@ STMicroelectronics stih4xx platforms - clock-names: names of the clocks listed in clocks property in the same order. - hdmi,hpd-gpio: gpio id to detect if an hdmi cable is plugged or not. + - ddc: phandle of an I2C controller used for DDC EDID probing
sti-hda: Required properties: diff --git a/drivers/gpu/drm/sti/sti_hdmi.c b/drivers/gpu/drm/sti/sti_hdmi.c index ef93156..7673189 100644 --- a/drivers/gpu/drm/sti/sti_hdmi.c +++ b/drivers/gpu/drm/sti/sti_hdmi.c @@ -481,17 +481,15 @@ static const struct drm_bridge_funcs sti_hdmi_bridge_funcs = {
static int sti_hdmi_connector_get_modes(struct drm_connector *connector) { - struct i2c_adapter *i2c_adap; + struct sti_hdmi_connector *hdmi_connector + = to_sti_hdmi_connector(connector); + struct sti_hdmi *hdmi = hdmi_connector->hdmi; struct edid *edid; int count;
DRM_DEBUG_DRIVER("\n");
- i2c_adap = i2c_get_adapter(1); - if (!i2c_adap) - goto fail; - - edid = drm_get_edid(connector, i2c_adap); + edid = drm_get_edid(connector, hdmi->ddc_adapt); if (!edid) goto fail;
@@ -604,29 +602,38 @@ static int sti_hdmi_bind(struct device *dev, struct device *master, void *data) struct sti_hdmi_connector *connector; struct drm_connector *drm_connector; struct drm_bridge *bridge; - struct i2c_adapter *i2c_adap; + struct device_node *ddc; int err;
- i2c_adap = i2c_get_adapter(1); - if (!i2c_adap) - return -EPROBE_DEFER; + ddc = of_parse_phandle(dev->of_node, "ddc", 0); + if (ddc) { + hdmi->ddc_adapt = of_find_i2c_adapter_by_node(ddc); + if (!hdmi->ddc_adapt) { + err = -EPROBE_DEFER; + of_node_put(ddc); + return err; + } + + of_node_put(ddc); + }
/* Set the drm device handle */ hdmi->drm_dev = drm_dev;
encoder = sti_hdmi_find_encoder(drm_dev); if (!encoder) - return -ENOMEM; + goto err_adapt;
connector = devm_kzalloc(dev, sizeof(*connector), GFP_KERNEL); if (!connector) - return -ENOMEM; + goto err_adapt; +
connector->hdmi = hdmi;
bridge = devm_kzalloc(dev, sizeof(*bridge), GFP_KERNEL); if (!bridge) - return -ENOMEM; + goto err_adapt;
bridge->driver_private = hdmi; drm_bridge_init(drm_dev, bridge, &sti_hdmi_bridge_funcs); @@ -663,6 +670,8 @@ err_sysfs: err_connector: drm_bridge_cleanup(bridge); drm_connector_cleanup(drm_connector); +err_adapt: + put_device(&hdmi->ddc_adapt->dev); return -EINVAL; }
@@ -789,6 +798,11 @@ static int sti_hdmi_probe(struct platform_device *pdev)
static int sti_hdmi_remove(struct platform_device *pdev) { + struct sti_hdmi *hdmi = dev_get_drvdata(&pdev->dev); + + if (hdmi->ddc_adapt) + put_device(&hdmi->ddc_adapt->dev); + component_del(&pdev->dev, &sti_hdmi_ops); return 0; } diff --git a/drivers/gpu/drm/sti/sti_hdmi.h b/drivers/gpu/drm/sti/sti_hdmi.h index 61bec65..d00a3e0 100644 --- a/drivers/gpu/drm/sti/sti_hdmi.h +++ b/drivers/gpu/drm/sti/sti_hdmi.h @@ -62,6 +62,7 @@ struct sti_hdmi { wait_queue_head_t wait_event; bool event_received; struct reset_control *reset; + struct i2c_adapter *ddc_adapt; };
u32 hdmi_read(struct sti_hdmi *hdmi, int offset);
linaro-mm-sig@lists.linaro.org