Y2038 November 2015

y2038@lists.linaro.org

25 participants
77 discussions

[PATCH V1] serial:bfin-uart:Remove 'struct timeval'

by DengChao

The bfin-uart code uses real time with struct timeval. This will cause problems on 32-bit architectures in 2038 when time_t overflows. Since the code just needs delta value of time, it is not necessary to record them in real time. This patch changes the code to use the monotonic time instead, replaces struct timeval and do_gettimeofday() with u64 and ktime_get_ns(). Signed-off-by: DengChao <chao.deng(a)linaro.org> --- drivers/tty/serial/bfin_uart.c | 29 +++++++++++++---------------- 1 file changed, 13 insertions(+), 16 deletions(-) diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c index ae3cf94..1270cc4 100644 --- a/drivers/tty/serial/bfin_uart.c +++ b/drivers/tty/serial/bfin_uart.c @@ -213,7 +213,7 @@ static void bfin_serial_stop_rx(struct uart_port *port) static void bfin_serial_rx_chars(struct bfin_serial_port *uart) { unsigned int status, ch, flg; - static struct timeval anomaly_start = { .tv_sec = 0 }; + static u64 anomaly_start; status = UART_GET_LSR(uart); UART_CLEAR_LSR(uart); @@ -246,27 +246,24 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) * character time +/- some percent. So 1.5 sounds good. All other * Blackfin families operate properly. Woo. */ - if (anomaly_start.tv_sec) { - struct timeval curr; - suseconds_t usecs; + if (anomaly_start > 0) { + u64 curr, nsecs, threshold_ns; if ((~ch & (~ch + 1)) & 0xff) goto known_good_char; - do_gettimeofday(&curr); - if (curr.tv_sec - anomaly_start.tv_sec > 1) + curr = ktime_get_ns(); + nsecs = curr - anomaly_start; + if (nsecs >> 32) goto known_good_char; - - usecs = 0; - if (curr.tv_sec != anomaly_start.tv_sec) - usecs += USEC_PER_SEC; - usecs += curr.tv_usec - anomaly_start.tv_usec; - - if (usecs > UART_GET_ANOMALY_THRESHOLD(uart)) + + threshold_ns = UART_GET_ANOMALY_THRESHOLD(uart) + * NSEC_PER_USEC; + if (nsecs > threshold_ns) goto known_good_char; if (ch) - anomaly_start.tv_sec = 0; + anomaly_start = 0; else anomaly_start = curr; @@ -274,14 +271,14 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) known_good_char: status &= ~BI; - anomaly_start.tv_sec = 0; + anomaly_start = 0; } } if (status & BI) { if (ANOMALY_05000363) if (bfin_revid() < 5) - do_gettimeofday(&anomaly_start); + anomaly_start = ktime_get_ns(); uart->port.icount.brk++; if (uart_handle_break(&uart->port)) goto ignore_char; -- 1.9.1

8 years, 5 months

[PATCH v3 0/2] Convert ppdev to y2038 safe

by Bamvor Jian Zhang

Here is the third version for converting parport device(ppdev) to y2038 safe. The first two version could found at [1],[2]. An y2038 safe application/kernel use 64bit time_t(aka time64_t) instead of 32bit time_t. There are the 5 cases need to support: summary |u:arch |u:tv_sec |k:arch |k:tv_sec -------------------|-------|---------|-------|-------- 32_y2038_unsafe |32 |32 |32 |32 32_y2038_safe |32 |64 |32 |64 compat_y2038_unsafe|32 |32 |64 |64 compat_y2038_safe |32 |64 |64 |64 64_y2038_safe |64 |64 |64 |64 notes: 1. xxx_y2038_safe/unsafe. 32 means app running on the 32bit kernel. compat means 32bit app running on 64bit kernel. 64 means 64bit app running on 64bit kernel. 2. 1.3.5 are the original one, we need keep the compatability. 2,4 is new one we need to support. There are different ways to do this. Convert to 64bit time and/or define COMPAT_USE_64BIT_TIME 0 or 1 to indicate y2038 safe or unsafe. But it is not mean that we need to convert all the time relative struct to 64bit. Because some time relative struct(e.g. timeval in ppdev.c) is mainly the offset of the real time. The main issue in ppdev.c is PPSETTIME/PPGETTIME which transfer timeval between user space and kernel. My approach here is handle them as different ioctl command. Build successful on arm64 and arm. [1] https://lists.linaro.org/pipermail/y2038/2015-June/000522.html [2] https://lists.linaro.org/pipermail/y2038/2015-June/000567.html Bamvor Jian Zhang (2): ppdev: convert to y2038 safe ppdev: add support for compat ioctl drivers/char/ppdev.c | 85 ++++++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 69 insertions(+), 16 deletions(-) -- 2.1.4

8 years, 5 months

[PATCH 0/5] fs: nfsd: Remove time_t

by Ksenija Stanojevic

Replace time_t with u32 in variables boot_time, nfsd4_lease, nfsd4_grace, dl_time, oo_time. Changes have not been made to variables that use inode timestamp or function seconds_since_boot, which aren't y2038 safe. Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic(a)gmail.com> Ksenija Stanojevic (5): fs: nfsd: Replace time_t with time64_t in boot_time fs: nfsd: Replace time_t with u32 in nfsd4_lease fs: nfsd: Replace time_t with u32 in nfsd4_grace fs: nfsd: Replace time_t with u32 dl_time fs: nfsd: Replace time_t with u32 oo_time fs/nfsd/netns.h | 6 +++--- fs/nfsd/nfs4callback.c | 2 +- fs/nfsd/nfs4recover.c | 6 +++--- fs/nfsd/nfs4state.c | 20 ++++++++++---------- fs/nfsd/nfsctl.c | 6 +++--- fs/nfsd/state.h | 6 +++--- 6 files changed, 23 insertions(+), 23 deletions(-) -- 1.9.1

8 years, 5 months

[PATCH v2 0/9] [media] y2038 conversion for subsystem

by Arnd Bergmann

This is my second attempt to convert subsystem-wide code in v4l for y2038 changes, removing uses of time_t in common files and adding support for user space that defines time_t as 64 bit. Based on the initial feedback from Hans Verkuil, I've changed the ioctl handling to remain 100% compatible with existing headers, which also makes it more likely that existing source code can compile without changes. This comes at a noticeable expense of adding complexity to the v4l2-ioctl.c file, as we now have to handle two versions of each ioctl command that passes a time_t in its arguments. I have not added support for the new binary layout of v4l2_timeval to v4l2-compat-ioctl32 yet, that is something I can do when the basic approach has been agreed on. Arnd Arnd Bergmann (9): [media] dvb: use ktime_t for internal timeout [media] dvb: remove unused systime() function [media] dvb: don't use 'time_t' in event ioctl [media] exynos4-is: use monotonic timestamps as advertized [media] make VIDIOC_DQEVENT work with 64-bit time_t [media] use v4l2_get_timestamp where possible [media] v4l2: introduce v4l2_timeval [media] handle 64-bit time_t in v4l2_buffer [media] omap3isp: support 64-bit version of omap3isp_stat_data drivers/media/dvb-core/demux.h | 2 +- drivers/media/dvb-core/dmxdev.c | 2 +- drivers/media/dvb-core/dvb_demux.c | 17 +- drivers/media/dvb-core/dvb_demux.h | 4 +- drivers/media/dvb-core/dvb_net.c | 2 +- drivers/media/dvb-frontends/dibx000_common.c | 10 - drivers/media/dvb-frontends/dibx000_common.h | 2 - drivers/media/pci/bt8xx/bttv-driver.c | 7 +- drivers/media/pci/cx18/cx18-mailbox.c | 2 +- drivers/media/pci/meye/meye.h | 2 +- drivers/media/pci/zoran/zoran.h | 2 +- drivers/media/platform/coda/coda.h | 2 +- drivers/media/platform/exynos4-is/fimc-capture.c | 8 +- drivers/media/platform/exynos4-is/fimc-lite.c | 7 +- drivers/media/platform/omap/omap_vout.c | 4 +- drivers/media/platform/omap3isp/isph3a_aewb.c | 2 + drivers/media/platform/omap3isp/isph3a_af.c | 2 + drivers/media/platform/omap3isp/isphist.c | 2 + drivers/media/platform/omap3isp/ispstat.c | 20 +- drivers/media/platform/omap3isp/ispstat.h | 4 +- drivers/media/platform/s3c-camif/camif-capture.c | 8 +- drivers/media/platform/vim2m.c | 2 +- drivers/media/platform/vivid/vivid-ctrls.c | 2 +- drivers/media/usb/cpia2/cpia2.h | 2 +- drivers/media/usb/cpia2/cpia2_v4l.c | 2 +- drivers/media/usb/gspca/gspca.c | 6 +- drivers/media/usb/usbvision/usbvision.h | 2 +- drivers/media/v4l2-core/v4l2-common.c | 6 +- drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 35 ---- drivers/media/v4l2-core/v4l2-dev.c | 1 + drivers/media/v4l2-core/v4l2-event.c | 35 +++- drivers/media/v4l2-core/v4l2-ioctl.c | 227 ++++++++++++++++++++--- drivers/media/v4l2-core/v4l2-subdev.c | 6 + drivers/staging/media/omap4iss/iss_video.c | 5 +- include/media/v4l2-common.h | 2 +- include/media/v4l2-event.h | 2 + include/media/videobuf-core.h | 2 +- include/trace/events/v4l2.h | 12 +- include/uapi/linux/dvb/video.h | 3 +- include/uapi/linux/omap3isp.h | 19 ++ include/uapi/linux/videodev2.h | 78 ++++++++ 41 files changed, 415 insertions(+), 145 deletions(-) -- 2.1.0.rc2

8 years, 5 months

[PATCH v2] scsi: bfa: Use ktime_get_real_seconds()

by Amitoj Kaur Chawla

32 bit systems using 'struct timeval' will break in the year 2038, so we modify the code appropriately. This patch replaces the use of struct timeval and do_gettimeofday() with ktime_get_real_seconds() which returns a 64 bit value which is safer than struct timeval. This patch also replaces u32 time storing variables with u64 variables to store the 64 bit seconds value returned by ktime_get_real_seconds() Signed-off-by: Amitoj Kaur Chawla <amitoj1606(a)gmail.com> --- Changes in v2: -Converted u32 type to u64 type drivers/scsi/bfa/bfa_fcpim.c | 2 +- drivers/scsi/bfa/bfa_fcpim.h | 4 ++-- drivers/scsi/bfa/bfad_bsg.c | 6 +++--- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/bfa/bfa_fcpim.c b/drivers/scsi/bfa/bfa_fcpim.c index d7385d1..224db4e 100644 --- a/drivers/scsi/bfa/bfa_fcpim.c +++ b/drivers/scsi/bfa/bfa_fcpim.c @@ -468,7 +468,7 @@ bfa_ioim_profile_start(struct bfa_ioim_s *ioim) } bfa_status_t -bfa_fcpim_profile_on(struct bfa_s *bfa, u32 time) +bfa_fcpim_profile_on(struct bfa_s *bfa, u64 time) { struct bfa_itnim_s *itnim; struct bfa_fcpim_s *fcpim = BFA_FCPIM(bfa); diff --git a/drivers/scsi/bfa/bfa_fcpim.h b/drivers/scsi/bfa/bfa_fcpim.h index e693af6..274e3af 100644 --- a/drivers/scsi/bfa/bfa_fcpim.h +++ b/drivers/scsi/bfa/bfa_fcpim.h @@ -135,7 +135,7 @@ struct bfa_fcpim_s { struct bfa_fcpim_del_itn_stats_s del_itn_stats; bfa_boolean_t ioredirect; bfa_boolean_t io_profile; - u32 io_profile_start_time; + u64 io_profile_start_time; bfa_fcpim_profile_t profile_comp; bfa_fcpim_profile_t profile_start; }; @@ -309,7 +309,7 @@ bfa_status_t bfa_fcpim_port_iostats(struct bfa_s *bfa, struct bfa_itnim_iostats_s *stats, u8 lp_tag); void bfa_fcpim_add_stats(struct bfa_itnim_iostats_s *fcpim_stats, struct bfa_itnim_iostats_s *itnim_stats); -bfa_status_t bfa_fcpim_profile_on(struct bfa_s *bfa, u32 time); +bfa_status_t bfa_fcpim_profile_on(struct bfa_s *bfa, u64 time); bfa_status_t bfa_fcpim_profile_off(struct bfa_s *bfa); #define bfa_fcpim_ioredirect_enabled(__bfa) \ diff --git a/drivers/scsi/bfa/bfad_bsg.c b/drivers/scsi/bfa/bfad_bsg.c index 023b9d4..92f5b0f 100644 --- a/drivers/scsi/bfa/bfad_bsg.c +++ b/drivers/scsi/bfa/bfad_bsg.c @@ -15,6 +15,7 @@ * General Public License for more details. */ +#include <linux/ktime.h> #include <linux/uaccess.h> #include "bfad_drv.h" #include "bfad_im.h" @@ -2093,13 +2094,12 @@ bfad_iocmd_fcpim_cfg_profile(struct bfad_s *bfad, void *cmd, unsigned int v_cmd) { struct bfa_bsg_fcpim_profile_s *iocmd = (struct bfa_bsg_fcpim_profile_s *)cmd; - struct timeval tv; unsigned long flags; - do_gettimeofday(&tv); spin_lock_irqsave(&bfad->bfad_lock, flags); if (v_cmd == IOCMD_FCPIM_PROFILE_ON) - iocmd->status = bfa_fcpim_profile_on(&bfad->bfa, tv.tv_sec); + iocmd->status = bfa_fcpim_profile_on(&bfad->bfa, + ktime_get_real_seconds()); else if (v_cmd == IOCMD_FCPIM_PROFILE_OFF) iocmd->status = bfa_fcpim_profile_off(&bfad->bfa); spin_unlock_irqrestore(&bfad->bfad_lock, flags); -- 1.9.1

8 years, 5 months

[PATCH v3 1/2] scsi: bfa: bfa_svc: Use ktime_get_real_seconds()

by Amitoj Kaur Chawla

32 bit systems using 'struct timeval' will break in the year 2038, so we modify the code appropriately. This patch removes the function bfa_get_log_time() which is only used to get current time in seconds. bfa_get_log_time() is replaced with ktime_get_real_seconds() which returns a 64 bit value. Signed-off-by: Amitoj Kaur Chawla <amitoj1606(a)gmail.com> --- Changes in v2: -None Changes in v3: -None drivers/scsi/bfa/bfa_svc.c | 21 +++++---------------- 1 file changed, 5 insertions(+), 16 deletions(-) diff --git a/drivers/scsi/bfa/bfa_svc.c b/drivers/scsi/bfa/bfa_svc.c index 625225f..b3668e9 100644 --- a/drivers/scsi/bfa/bfa_svc.c +++ b/drivers/scsi/bfa/bfa_svc.c @@ -15,6 +15,7 @@ * General Public License for more details. */ +#include <linux/ktime.h> #include "bfad_drv.h" #include "bfad_im.h" #include "bfa_plog.h" @@ -303,18 +304,6 @@ plkd_validate_logrec(struct bfa_plog_rec_s *pl_rec) return 0; } -static u64 -bfa_get_log_time(void) -{ - u64 system_time = 0; - struct timeval tv; - do_gettimeofday(&tv); - - /* We are interested in seconds only. */ - system_time = tv.tv_sec; - return system_time; -} - static void bfa_plog_add(struct bfa_plog_s *plog, struct bfa_plog_rec_s *pl_rec) { @@ -335,7 +324,7 @@ bfa_plog_add(struct bfa_plog_s *plog, struct bfa_plog_rec_s *pl_rec) memcpy(pl_recp, pl_rec, sizeof(struct bfa_plog_rec_s)); - pl_recp->tv = bfa_get_log_time(); + pl_recp->tv = ktime_get_real_seconds(); BFA_PL_LOG_REC_INCR(plog->tail); if (plog->head == plog->tail) @@ -6278,7 +6267,7 @@ bfa_fcdiag_lb_is_running(struct bfa_s *bfa) * D-port */ #define bfa_dport_result_start(__dport, __mode) do { \ - (__dport)->result.start_time = bfa_get_log_time(); \ + (__dport)->result.start_time = ktime_get_real_seconds();\ (__dport)->result.status = DPORT_TEST_ST_INPRG; \ (__dport)->result.mode = (__mode); \ (__dport)->result.rp_pwwn = (__dport)->rp_pwwn; \ @@ -6717,7 +6706,7 @@ bfa_dport_scn(struct bfa_dport_s *dport, struct bfi_diag_dport_scn_s *msg) switch (dport->i2hmsg.scn.state) { case BFI_DPORT_SCN_TESTCOMP: - dport->result.end_time = bfa_get_log_time(); + dport->result.end_time = ktime_get_real_seconds(); bfa_trc(dport->bfa, dport->result.end_time); dport->result.status = msg->info.testcomp.status; @@ -6764,7 +6753,7 @@ bfa_dport_scn(struct bfa_dport_s *dport, struct bfi_diag_dport_scn_s *msg) case BFI_DPORT_SCN_SUBTESTSTART: subtesttype = msg->info.teststart.type; dport->result.subtest[subtesttype].start_time = - bfa_get_log_time(); + ktime_get_real_seconds(); dport->result.subtest[subtesttype].status = DPORT_TEST_ST_INPRG; -- 1.9.1

8 years, 5 months

[PATCH 0/3] fix y2038 problem in input_event

by WEN Pingbo

Before this, I have discussed this problem with Arnd. And Arnd have an idea that by converting timeval to long / long in input_event, so that input_event structure size will be unchanged, and timeval structure will removed entirely. But we also need to avoid using CLOCK_REALTIME in userland, to keep the new input_event structure y2038 safe. The input_event will only support monotonic time in Arnd's idea. And we still need to add wall time support for old 32-bit binary. Those patches try to keep original input capacity, and resolve y2038 problem in input_event radically. struct input_event is only used between kernel and userspace communication (except uinput). So that we can replace input_event with input_event64 in kernel entirely, and add a conversion in input_event_from/to_user() to keep compatible with old 32-bits binary. userland can switch to input_event64, which is y2038 safe, via ioctl. WEN Pingbo (3): evdev: convert input_event to input_event64 evdev: add new ioctl EVIOCSEVENT / EVIOCGEVENT uinput: convert input_event to input_event64 drivers/input/evdev.c | 38 ++++++++++++------- drivers/input/input-compat.c | 88 +++++++++++++++++++++++++++++++++++++------- drivers/input/input-compat.h | 9 +++-- drivers/input/misc/uinput.c | 17 ++++++--- include/linux/uinput.h | 2 +- include/uapi/linux/input.h | 18 +++++++++ 6 files changed, 134 insertions(+), 38 deletions(-) -- 1.9.1

8 years, 5 months

[PATCH] scsi: replace struct timeval with ktime_get_real_seconds()

by Alison Schofield

Replace the use of struct timeval and do_gettimeofday() with 64 bit ktime_get_real_seconds. Prevents 32-bit type overflow in year 2038 on 32-bit systems. Signed-off-by: Alison Schofield <amsfield22(a)gmail.com> --- drivers/scsi/pmcraid.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c index ed31d8c..3f64275 100644 --- a/drivers/scsi/pmcraid.c +++ b/drivers/scsi/pmcraid.c @@ -45,6 +45,7 @@ #include <asm/processor.h> #include <linux/libata.h> #include <linux/mutex.h> +#include <linux/ktime.h> #include <scsi/scsi.h> #include <scsi/scsi_host.h> #include <scsi/scsi_device.h> @@ -5563,11 +5564,9 @@ static void pmcraid_set_timestamp(struct pmcraid_cmd *cmd) __be32 time_stamp_len = cpu_to_be32(PMCRAID_TIMESTAMP_LEN); struct pmcraid_ioadl_desc *ioadl = ioarcb->add_data.u.ioadl; - struct timeval tv; __le64 timestamp; - do_gettimeofday(&tv); - timestamp = tv.tv_sec * 1000; + timestamp = ktime_get_real_seconds() * 1000; pinstance->timestamp_data->timestamp[0] = (__u8)(timestamp); pinstance->timestamp_data->timestamp[1] = (__u8)((timestamp) >> 8); -- 2.1.4

8 years, 5 months

You have 1 new fax, document 0000852481

by Interfax Online

You have received a new fax. Scanned fax document is attached to this email. Scanned by: Daniel Chamberlain Document name: scan_0000852481.doc Date: Thu, 5 Nov 2015 03:19:32 +0300 Scan quality: 500 DPI File size: 144 Kb Pages sent: 3 Scanned in: 47 seconds Thanks for using Interfax service!

8 years, 5 months

[RESEND PATCH] USB: usbmon: Use 64bit timestamp for mon_bin_hdr

by Tina Ruchandani

struct mon_bin_hdr allows for a 64-bit seconds timestamp. The code currently uses 'struct timeval' to populate the timestamp in mon_bin_hdr, which has a 32-bit seconds field and will overflow in year 2038 and beyond. This patch replaces 'struct timeval' with 'struct timespec64' which is y2038 safe. This patch is part of a larger attempt to remove instances of struct timeval and other 32-bit timekeeping (time_t, struct timespec) from the kernel. Signed-off-by: Tina Ruchandani <ruchandani.tina(a)gmail.com> --- drivers/usb/mon/mon_bin.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c index 3598f1a..1a874a1 100644 --- a/drivers/usb/mon/mon_bin.c +++ b/drivers/usb/mon/mon_bin.c @@ -18,6 +18,7 @@ #include <linux/mm.h> #include <linux/scatterlist.h> #include <linux/slab.h> +#include <linux/time64.h> #include <asm/uaccess.h> @@ -92,8 +93,8 @@ struct mon_bin_hdr { unsigned short busnum; /* Bus number */ char flag_setup; char flag_data; - s64 ts_sec; /* gettimeofday */ - s32 ts_usec; /* gettimeofday */ + s64 ts_sec; /* getnstimeofday64 */ + s32 ts_usec; /* getnstimeofday64 */ int status; unsigned int len_urb; /* Length of data (submitted or actual) */ unsigned int len_cap; /* Delivered length */ @@ -483,7 +484,7 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb, char ev_type, int status) { const struct usb_endpoint_descriptor *epd = &urb->ep->desc; - struct timeval ts; + struct timespec64 ts; unsigned long flags; unsigned int urb_length; unsigned int offset; @@ -494,7 +495,7 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb, struct mon_bin_hdr *ep; char data_tag = 0; - do_gettimeofday(&ts); + getnstimeofday64(&ts); spin_lock_irqsave(&rp->b_lock, flags); @@ -568,7 +569,7 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb, ep->busnum = urb->dev->bus->busnum; ep->id = (unsigned long) urb; ep->ts_sec = ts.tv_sec; - ep->ts_usec = ts.tv_usec; + ep->ts_usec = ts.tv_nsec / NSEC_PER_USEC; ep->status = status; ep->len_urb = urb_length; ep->len_cap = length + lendesc; @@ -629,12 +630,12 @@ static void mon_bin_complete(void *data, struct urb *urb, int status) static void mon_bin_error(void *data, struct urb *urb, int error) { struct mon_reader_bin *rp = data; - struct timeval ts; + struct timespec64 ts; unsigned long flags; unsigned int offset; struct mon_bin_hdr *ep; - do_gettimeofday(&ts); + getnstimeofday64(&ts); spin_lock_irqsave(&rp->b_lock, flags); @@ -656,7 +657,7 @@ static void mon_bin_error(void *data, struct urb *urb, int error) ep->busnum = urb->dev->bus->busnum; ep->id = (unsigned long) urb; ep->ts_sec = ts.tv_sec; - ep->ts_usec = ts.tv_usec; + ep->ts_usec = ts.tv_nsec / NSEC_PER_USEC; ep->status = error; ep->flag_setup = '-'; -- 2.6.0.rc2.230.g3dd15c0

8 years, 5 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

Y2038 November 2015