Y2038 November 2015

y2038@lists.linaro.org

25 participants
77 discussions

[PATCH] serial:bfin-uart:Remove 'struct timeval'

by DengChao

The bfin-uart code uses real time with struct timeval. This will cause problems on 32-bit architectures in 2038 when time_t overflows. Since the code just needs delta value of time, it is not necessary to record them in real time. This patch changes the code to use the monotonic time instead, replaces do_gettimeofday() and struct timeval with ktime_get() and ktime_t. Signed-off-by: DengChao <chao.deng(a)linaro.org> --- drivers/tty/serial/bfin_uart.c | 30 ++++++++++++++---------------- 1 file changed, 14 insertions(+), 16 deletions(-) diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c index ae3cf94..abfb988 100644 --- a/drivers/tty/serial/bfin_uart.c +++ b/drivers/tty/serial/bfin_uart.c @@ -213,7 +213,7 @@ static void bfin_serial_stop_rx(struct uart_port *port) static void bfin_serial_rx_chars(struct bfin_serial_port *uart) { unsigned int status, ch, flg; - static struct timeval anomaly_start = { .tv_sec = 0 }; + static time64_t anomaly_start; status = UART_GET_LSR(uart); UART_CLEAR_LSR(uart); @@ -246,42 +246,40 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) * character time +/- some percent. So 1.5 sounds good. All other * Blackfin families operate properly. Woo. */ - if (anomaly_start.tv_sec) { - struct timeval curr; - suseconds_t usecs; + if (anomaly_start >= NSEC_PER_SEC) { + ktime_t curr; + time64_t nsecs, threshold_ns; if ((~ch & (~ch + 1)) & 0xff) goto known_good_char; - do_gettimeofday(&curr); - if (curr.tv_sec - anomaly_start.tv_sec > 1) + curr = ktime_get(); + nsecs = ktime_to_ns(ktime_sub_ns(curr, anomaly_start)); + if (nsecs > NSEC_PER_SEC) goto known_good_char; - usecs = 0; - if (curr.tv_sec != anomaly_start.tv_sec) - usecs += USEC_PER_SEC; - usecs += curr.tv_usec - anomaly_start.tv_usec; - - if (usecs > UART_GET_ANOMALY_THRESHOLD(uart)) + threshold_ns = UART_GET_ANOMALY_THRESHOLD(uart) + * NSEC_PER_USEC; + if (nsecs > threshold_ns) goto known_good_char; if (ch) - anomaly_start.tv_sec = 0; + anomaly_start = 0; else - anomaly_start = curr; + anomaly_start = ktime_to_ns(curr); return; known_good_char: status &= ~BI; - anomaly_start.tv_sec = 0; + anomaly_start = 0; } } if (status & BI) { if (ANOMALY_05000363) if (bfin_revid() < 5) - do_gettimeofday(&anomaly_start); + anomaly_start = ktime_to_ns(ktime_get()); uart->port.icount.brk++; if (uart_handle_break(&uart->port)) goto ignore_char; -- 1.9.1

9 years, 1 month

[PATCH] block: sx8: Remove 'struct timeval'

by Amitoj Kaur Chawla

32 bit systems using 'struct timeval' will overflow in the year 2038, so we modify the code appropriately. This patch replaces the use of struct timeval and do_gettimeofday() with ktime_get_real_seconds() which returns a 64 bit seconds value. Signed-off-by: Amitoj Kaur Chawla <amitoj1606(a)gmail.com> --- drivers/block/sx8.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/block/sx8.c b/drivers/block/sx8.c index 59c91d4..cf87d9d 100644 --- a/drivers/block/sx8.c +++ b/drivers/block/sx8.c @@ -361,7 +361,7 @@ struct carm_msg_sync_time { u16 reserved1; __le32 handle; u32 reserved2; - __le32 timestamp; + __le64 timestamp; } __attribute__((packed)); struct carm_msg_get_fw_ver { @@ -671,16 +671,13 @@ static int carm_send_special (struct carm_host *host, carm_sspc_t func) static unsigned int carm_fill_sync_time(struct carm_host *host, unsigned int idx, void *mem) { - struct timeval tv; struct carm_msg_sync_time *st = mem; - do_gettimeofday(&tv); - memset(st, 0, sizeof(*st)); st->type = CARM_MSG_MISC; st->subtype = MISC_SET_TIME; st->handle = cpu_to_le32(TAG_ENCODE(idx)); - st->timestamp = cpu_to_le32(tv.tv_sec); + st->timestamp = cpu_to_le64(ktime_get_real_seconds()); return sizeof(struct carm_msg_sync_time); } -- 1.9.1

9 years, 1 month

[PATCH] mtd:replace struct timeval with ktime_t in tests

by DengChao

The mtd tests' code recodes tests' start time and finish time by storing real time in struct timeval. This will cause problems on 32-bit architectures in 2038 when time_t overflows. Since the tests' codes just need delta value between start and end time, it is not necessary to record them in real time. This patch changes the code to use the monotonic time instead, replaces ktime_get() and ktime_t with do_gettimeofday() and struct timeval. Signed-off-by: DengChao <chao.deng(a)linaro.org> --- drivers/mtd/tests/speedtest.c | 9 ++++----- drivers/mtd/tests/torturetest.c | 9 ++++----- 2 files changed, 8 insertions(+), 10 deletions(-) diff --git a/drivers/mtd/tests/speedtest.c b/drivers/mtd/tests/speedtest.c index 5a6f31a..039cf92 100644 --- a/drivers/mtd/tests/speedtest.c +++ b/drivers/mtd/tests/speedtest.c @@ -49,7 +49,7 @@ static int pgsize; static int ebcnt; static int pgcnt; static int goodebcnt; -static struct timeval start, finish; +static ktime_t start, finish; static int multiblock_erase(int ebnum, int blocks) { @@ -168,12 +168,12 @@ static int read_eraseblock_by_2pages(int ebnum) static inline void start_timing(void) { - do_gettimeofday(&start); + start = ktime_get(); } static inline void stop_timing(void) { - do_gettimeofday(&finish); + finish = ktime_get(); } static long calc_speed(void) @@ -181,8 +181,7 @@ static long calc_speed(void) uint64_t k; long ms; - ms = (finish.tv_sec - start.tv_sec) * 1000 + - (finish.tv_usec - start.tv_usec) / 1000; + ms = ktime_ms_delta(finish, start); if (ms == 0) return 0; k = (uint64_t)goodebcnt * (mtd->erasesize / 1024) * 1000; diff --git a/drivers/mtd/tests/torturetest.c b/drivers/mtd/tests/torturetest.c index e5d6e6d..3c8a86b 100644 --- a/drivers/mtd/tests/torturetest.c +++ b/drivers/mtd/tests/torturetest.c @@ -79,18 +79,18 @@ static unsigned char *check_buf; static unsigned int erase_cycles; static int pgsize; -static struct timeval start, finish; +static ktime_t start, finish; static void report_corrupt(unsigned char *read, unsigned char *written); static inline void start_timing(void) { - do_gettimeofday(&start); + start = ktime_get(); } static inline void stop_timing(void) { - do_gettimeofday(&finish); + finish = ktime_get(); } /* @@ -333,8 +333,7 @@ static int __init tort_init(void) long ms; stop_timing(); - ms = (finish.tv_sec - start.tv_sec) * 1000 + - (finish.tv_usec - start.tv_usec) / 1000; + ms = ktime_ms_delta(finish, start); pr_info("%08u erase cycles done, took %lu " "milliseconds (%lu seconds)\n", erase_cycles, ms, ms / 1000); -- 1.9.1

9 years, 1 month

[PATCH] net: hamradio: baycom_ser_fdx: Replace timeval with timespec64

by Amitoj Kaur Chawla

32 bit systems using 'struct timeval' will break in the year 2038, so we replace the code appropriately. This patch replaces struct timeval with struct timespec64. The patch also changes the code to use ktime_get_real_ts64() which returns a 'struct timespec64' instead of do_gettimeofday() which returns a 'struct timeval' Signed-off-by: Amitoj Kaur Chawla <amitoj1606(a)gmail.com> --- drivers/net/hamradio/baycom_ser_fdx.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/net/hamradio/baycom_ser_fdx.c b/drivers/net/hamradio/baycom_ser_fdx.c index 636b65c..e250ec4 100644 --- a/drivers/net/hamradio/baycom_ser_fdx.c +++ b/drivers/net/hamradio/baycom_ser_fdx.c @@ -71,6 +71,7 @@ /*****************************************************************************/ +#include <linux/time64.h> #include <linux/capability.h> #include <linux/module.h> #include <linux/ioport.h> @@ -228,14 +229,15 @@ static inline unsigned int hweight8(unsigned int w) /* --------------------------------------------------------------------- */ -static __inline__ void ser12_rx(struct net_device *dev, struct baycom_state *bc, struct timeval *tv, unsigned char curs) +static __inline__ void ser12_rx(struct net_device *dev, struct baycom_state *bc, struct timespec64 *ts, unsigned char curs) { int timediff; int bdus8 = bc->baud_us >> 3; int bdus4 = bc->baud_us >> 2; int bdus2 = bc->baud_us >> 1; - timediff = 1000000 + tv->tv_usec - bc->modem.ser12.pll_time; + timediff = 1000000 + (ts->tv_nsec / NSEC_PER_USEC) - + bc->modem.ser12.pll_time; while (timediff >= 500000) timediff -= 1000000; while (timediff >= bdus2) { @@ -287,7 +289,7 @@ static irqreturn_t ser12_interrupt(int irq, void *dev_id) { struct net_device *dev = (struct net_device *)dev_id; struct baycom_state *bc = netdev_priv(dev); - struct timeval tv; + struct timespec64 ts; unsigned char iir, msr; unsigned int txcount = 0; @@ -297,7 +299,7 @@ static irqreturn_t ser12_interrupt(int irq, void *dev_id) if ((iir = inb(IIR(dev->base_addr))) & 1) return IRQ_NONE; /* get current time */ - do_gettimeofday(&tv); + ktime_get_real_ts64(&ts); msr = inb(MSR(dev->base_addr)); /* delta DCD */ if ((msr & 8) && bc->opt_dcd) @@ -340,7 +342,7 @@ static irqreturn_t ser12_interrupt(int irq, void *dev_id) } iir = inb(IIR(dev->base_addr)); } while (!(iir & 1)); - ser12_rx(dev, bc, &tv, msr & 0x10); /* CTS */ + ser12_rx(dev, bc, &ts, msr & 0x10); /* CTS */ if (bc->modem.ptt && txcount) { if (bc->modem.ser12.txshreg <= 1) { bc->modem.ser12.txshreg = 0x10000 | hdlcdrv_getbits(&bc->hdrv); -- 1.9.1

9 years, 1 month

[PATCH] staging: gdm72xx: gdm_stdio: Replace timeval with ktime_t

by Amitoj Kaur Chawla

This driver uses 'struct timeval' which we are trying to remove since 32 bit time types will break in the year 2038 by replacing it with ktime_t. This patch changes do_gettimeofday() to ktime_get() because ktime_get() returns a ktime_t while do_gettimeofday() returns struct timeval. This patch also uses ktime_us_delta() to get the elapsed time. Signed-off-by: Amitoj Kaur Chawla <amitoj1606(a)gmail.com> --- drivers/staging/gdm72xx/gdm_sdio.c | 10 +++++----- drivers/staging/gdm72xx/gdm_sdio.h | 4 ++-- 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/staging/gdm72xx/gdm_sdio.c b/drivers/staging/gdm72xx/gdm_sdio.c index b0521da..1a2a5a4 100644 --- a/drivers/staging/gdm72xx/gdm_sdio.c +++ b/drivers/staging/gdm72xx/gdm_sdio.c @@ -14,6 +14,7 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/kernel.h> +#include <linux/ktime.h> #include <linux/mmc/core.h> #include <linux/mmc/card.h> @@ -303,7 +304,7 @@ static void send_sdu(struct sdio_func *func, struct tx_cxt *tx) put_tx_struct(t->tx_cxt, t); } - do_gettimeofday(&tx->sdu_stamp); + tx->sdu_stamp = ktime_get(); spin_unlock_irqrestore(&tx->lock, flags); } @@ -330,7 +331,7 @@ static void do_tx(struct work_struct *work) struct sdio_func *func = sdev->func; struct tx_cxt *tx = &sdev->tx; struct sdio_tx *t = NULL; - struct timeval now, *before; + ktime_t now, *before; int is_sdu = 0; long diff; unsigned long flags; @@ -346,11 +347,10 @@ static void do_tx(struct work_struct *work) list_del(&t->list); is_sdu = 0; } else if (!tx->stop_sdu_tx && !list_empty(&tx->sdu_list)) { - do_gettimeofday(&now); + now = ktime_get(); before = &tx->sdu_stamp; - diff = (now.tv_sec - before->tv_sec) * 1000000 + - (now.tv_usec - before->tv_usec); + diff = ktime_us_delta(now, before); if (diff >= 0 && diff < TX_INTERVAL) { schedule_work(&sdev->ws); spin_unlock_irqrestore(&tx->lock, flags); diff --git a/drivers/staging/gdm72xx/gdm_sdio.h b/drivers/staging/gdm72xx/gdm_sdio.h index 77ad9d6..aa7dad2 100644 --- a/drivers/staging/gdm72xx/gdm_sdio.h +++ b/drivers/staging/gdm72xx/gdm_sdio.h @@ -15,7 +15,7 @@ #define __GDM72XX_GDM_SDIO_H__ #include <linux/types.h> -#include <linux/time.h> +#include <linux/ktime.h> #define MAX_NR_SDU_BUF 64 @@ -32,7 +32,7 @@ struct tx_cxt { struct list_head free_list; struct list_head sdu_list; struct list_head hci_list; - struct timeval sdu_stamp; + ktime_t sdu_stamp; u8 *sdu_buf; spinlock_t lock; int can_send; -- 1.9.1

9 years, 1 month

[PATCH 0/2] scsi: Remove 'struct timeval'

by Amitoj Kaur Chawla

This patchset removes 'struct timeval' as 32 bit systems using timeval will break in the year 2038 so the code has been replaced appropriately. Amitoj Kaur Chawla (2): scsi: 3w-9xxx: Remove use of struct timeval scsi: bfa: Replace struct timeval with ktime_t drivers/scsi/3w-9xxx.c | 16 ++++++---------- drivers/scsi/bfa/bfa_defs_svc.h | 2 +- drivers/scsi/bfa/bfad_im.h | 2 +- 3 files changed, 8 insertions(+), 12 deletions(-) -- 1.9.1

9 years, 1 month

[PATCH v2] usb: misc: usbtest: Remove timeval usage

by Deepa Dinamani

timeval is deprecated and not y2038 safe. Its size also changes according to 32 bit/ 64 bit compilation. Replace it with 32 and 64 bit versions of its individual fields, giving two ioctls with different code values. The two ioctls are necessary to maintain the 32 bit and 64 bit userspace compatibility with a 64/32 bit kernel. Change unsigned to __u32 types for a definitive userspace interface. This is in accordance with the psABI that the unsigned type is always 32 bits. Also use motonic timer instead of real time to ensure positive delta values. Refactor usbtest_ioctl for readability to isolate the handling of the testing timing measurement. The official testusb userspace tool can be changed in a separate patch to reflect the __u32 changes as well. It can use the usbtest_param_32 struct, since 32 bit seconds is long enough for test durations. Signed-off-by: Deepa Dinamani <deepa.kernel(a)gmail.com> --- Changes since v1: * Removed new ioctl interface * Support both sizes of timeval using same ioctl code * Use timespec64 instead of ktime_t * Use __u32 for unsigned fields drivers/usb/misc/usbtest.c | 229 +++++++++++++++++++++++++++++---------------- 1 file changed, 147 insertions(+), 82 deletions(-) diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 637f3f7..d1ce881 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -22,18 +22,42 @@ static void complicated_callback(struct urb *urb); /*-------------------------------------------------------------------------*/ /* FIXME make these public somewhere; usbdevfs.h? */ -struct usbtest_param { + +/* Parameter for usbtest driver. */ +struct usbtest_param_32 { /* inputs */ - unsigned test_num; /* 0..(TEST_CASES-1) */ - unsigned iterations; - unsigned length; - unsigned vary; - unsigned sglen; + __u32 test_num; /* 0..(TEST_CASES-1) */ + __u32 iterations; + __u32 length; + __u32 vary; + __u32 sglen; /* outputs */ - struct timeval duration; + __s32 duration_sec; + __s32 duration_usec; }; -#define USBTEST_REQUEST _IOWR('U', 100, struct usbtest_param) + +/* + * Compat parameter to the usbtest driver. + * This supports older user space binaries compiled with 64 bit compiler. + */ +struct usbtest_param_64 { + /* inputs */ + __u32 test_num; /* 0..(TEST_CASES-1) */ + __u32 iterations; + __u32 length; + __u32 vary; + __u32 sglen; + + /* outputs */ + __s64 duration_sec; + __s64 duration_usec; +}; + +/* IOCTL interface to the driver. */ +#define USBTEST_REQUEST_32 _IOWR('U', 100, struct usbtest_param_32) +/* COMPAT IOCTL interface to the driver. */ +#define USBTEST_REQUEST_64 _IOWR('U', 100, struct usbtest_param_64) /*-------------------------------------------------------------------------*/ @@ -1030,7 +1054,7 @@ struct ctrl_ctx { unsigned pending; int status; struct urb **urb; - struct usbtest_param *param; + struct usbtest_param_32 *param; int last; }; @@ -1155,7 +1179,7 @@ error: } static int -test_ctrl_queue(struct usbtest_dev *dev, struct usbtest_param *param) +test_ctrl_queue(struct usbtest_dev *dev, struct usbtest_param_32 *param) { struct usb_device *udev = testdev_to_usbdev(dev); struct urb **urb; @@ -1930,7 +1954,7 @@ static struct urb *iso_alloc_urb( } static int -test_queue(struct usbtest_dev *dev, struct usbtest_param *param, +test_queue(struct usbtest_dev *dev, struct usbtest_param_32 *param, int pipe, struct usb_endpoint_descriptor *desc, unsigned offset) { struct transfer_context context; @@ -2049,81 +2073,20 @@ static int test_unaligned_bulk( return retval; } -/*-------------------------------------------------------------------------*/ - -/* We only have this one interface to user space, through usbfs. - * User mode code can scan usbfs to find N different devices (maybe on - * different busses) to use when testing, and allocate one thread per - * test. So discovery is simplified, and we have no device naming issues. - * - * Don't use these only as stress/load tests. Use them along with with - * other USB bus activity: plugging, unplugging, mousing, mp3 playback, - * video capture, and so on. Run different tests at different times, in - * different sequences. Nothing here should interact with other devices, - * except indirectly by consuming USB bandwidth and CPU resources for test - * threads and request completion. But the only way to know that for sure - * is to test when HC queues are in use by many devices. - * - * WARNING: Because usbfs grabs udev->dev.sem before calling this ioctl(), - * it locks out usbcore in certain code paths. Notably, if you disconnect - * the device-under-test, hub_wq will wait block forever waiting for the - * ioctl to complete ... so that usb_disconnect() can abort the pending - * urbs and then call usbtest_disconnect(). To abort a test, you're best - * off just killing the userspace task and waiting for it to exit. - */ - +/* Run tests. */ static int -usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf) +usbtest_do_ioctl(struct usb_interface *intf, struct usbtest_param_32 *param) { struct usbtest_dev *dev = usb_get_intfdata(intf); struct usb_device *udev = testdev_to_usbdev(dev); - struct usbtest_param *param = buf; - int retval = -EOPNOTSUPP; struct urb *urb; struct scatterlist *sg; struct usb_sg_request req; - struct timeval start; unsigned i; - - /* FIXME USBDEVFS_CONNECTINFO doesn't say how fast the device is. */ - - pattern = mod_pattern; - - if (code != USBTEST_REQUEST) - return -EOPNOTSUPP; + int retval = -EOPNOTSUPP; if (param->iterations <= 0) return -EINVAL; - - if (param->sglen > MAX_SGLEN) - return -EINVAL; - - if (mutex_lock_interruptible(&dev->lock)) - return -ERESTARTSYS; - - /* FIXME: What if a system sleep starts while a test is running? */ - - /* some devices, like ez-usb default devices, need a non-default - * altsetting to have any active endpoints. some tests change - * altsettings; force a default so most tests don't need to check. - */ - if (dev->info->alt >= 0) { - int res; - - if (intf->altsetting->desc.bInterfaceNumber) { - mutex_unlock(&dev->lock); - return -ENODEV; - } - res = set_altsetting(dev, dev->info->alt); - if (res) { - dev_err(&intf->dev, - "set altsetting to %d failed, %d\n", - dev->info->alt, res); - mutex_unlock(&dev->lock); - return res; - } - } - /* * Just a bunch of test cases that every HCD is expected to handle. * @@ -2133,7 +2096,6 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf) * FIXME add more tests! cancel requests, verify the data, control * queueing, concurrent read+write threads, and so on. */ - do_gettimeofday(&start); switch (param->test_num) { case 0: @@ -2548,13 +2510,116 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf) dev->in_pipe, NULL, 0); break; } - do_gettimeofday(&param->duration); - param->duration.tv_sec -= start.tv_sec; - param->duration.tv_usec -= start.tv_usec; - if (param->duration.tv_usec < 0) { - param->duration.tv_usec += 1000 * 1000; - param->duration.tv_sec -= 1; + return retval; +} + +/*-------------------------------------------------------------------------*/ + +/* We only have this one interface to user space, through usbfs. + * User mode code can scan usbfs to find N different devices (maybe on + * different busses) to use when testing, and allocate one thread per + * test. So discovery is simplified, and we have no device naming issues. + * + * Don't use these only as stress/load tests. Use them along with with + * other USB bus activity: plugging, unplugging, mousing, mp3 playback, + * video capture, and so on. Run different tests at different times, in + * different sequences. Nothing here should interact with other devices, + * except indirectly by consuming USB bandwidth and CPU resources for test + * threads and request completion. But the only way to know that for sure + * is to test when HC queues are in use by many devices. + * + * WARNING: Because usbfs grabs udev->dev.sem before calling this ioctl(), + * it locks out usbcore in certain code paths. Notably, if you disconnect + * the device-under-test, hub_wq will wait block forever waiting for the + * ioctl to complete ... so that usb_disconnect() can abort the pending + * urbs and then call usbtest_disconnect(). To abort a test, you're best + * off just killing the userspace task and waiting for it to exit. + */ + +static int +usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf) +{ + + struct usbtest_dev *dev = usb_get_intfdata(intf); + struct usbtest_param_64 *param_64 = buf; + struct usbtest_param_32 temp; + struct usbtest_param_32 *param_32 = buf; + struct timespec64 start; + struct timespec64 end; + struct timespec64 duration; + int retval = -EOPNOTSUPP; + + /* FIXME USBDEVFS_CONNECTINFO doesn't say how fast the device is. */ + + pattern = mod_pattern; + + if (mutex_lock_interruptible(&dev->lock)) + return -ERESTARTSYS; + + /* FIXME: What if a system sleep starts while a test is running? */ + + /* some devices, like ez-usb default devices, need a non-default + * altsetting to have any active endpoints. some tests change + * altsettings; force a default so most tests don't need to check. + */ + if (dev->info->alt >= 0) { + if (intf->altsetting->desc.bInterfaceNumber) { + retval = -ENODEV; + goto free_mutex; + } + retval = set_altsetting(dev, dev->info->alt); + if (retval) { + dev_err(&intf->dev, + "set altsetting to %d failed, %d\n", + dev->info->alt, retval); + goto free_mutex; + } + } + + switch (code) { + case USBTEST_REQUEST_64: + temp.test_num = param_64->test_num; + temp.iterations = param_64->iterations; + temp.length = param_64->length; + temp.sglen = param_64->sglen; + temp.vary = param_64->vary; + param_32 = &temp; + break; + + case USBTEST_REQUEST_32: + break; + + default: + retval = -EOPNOTSUPP; + goto free_mutex; + } + + getrawmonotonic64(&start); + + retval = usbtest_do_ioctl(intf, param_32); + if (retval) + goto free_mutex; + + getrawmonotonic64(&end); + + duration = timespec64_sub(end, start); + + temp.duration_sec = duration.tv_sec; + temp.duration_usec = duration.tv_nsec/1000; + + switch (code) { + case USBTEST_REQUEST_32: + param_32->duration_sec = temp.duration_sec; + param_32->duration_usec = temp.duration_usec; + break; + + case USBTEST_REQUEST_64: + param_64->duration_sec = temp.duration_sec; + param_64->duration_usec = temp.duration_usec; + break; } + +free_mutex: mutex_unlock(&dev->lock); return retval; } -- 1.9.1

9 years, 1 month

[PATCH] scsi: bfa: bfa_cs: Remove struct timeval

by Amitoj Kaur Chawla

32 bit systems using 'struct timeval' will break in the year 2038, so we replace the code appropriately. However, this driver is not broken in 2038 since we are using only the microseconds portion of the current time. This patch replaces struct timeval and do_gettimeofday() with ktime_get_real_ns() which returns a 64 bit value which is safer than struct timeval. ktime_get_real_ns() is also faster than the computations done in this macro previously to get the same value. Signed-off-by: Amitoj Kaur Chawla <amitoj1606(a)gmail.com> --- drivers/scsi/bfa/bfa_cs.h | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/bfa/bfa_cs.h b/drivers/scsi/bfa/bfa_cs.h index 91a8aa3..eeafef0 100644 --- a/drivers/scsi/bfa/bfa_cs.h +++ b/drivers/scsi/bfa/bfa_cs.h @@ -22,6 +22,7 @@ #ifndef __BFA_CS_H__ #define __BFA_CS_H__ +#include <linux/ktime.h> #include "bfad_drv.h" /* @@ -32,13 +33,7 @@ #define BFA_TRC_MAX (4 * 1024) #endif -#define BFA_TRC_TS(_trcm) \ - ({ \ - struct timeval tv; \ - \ - do_gettimeofday(&tv); \ - (tv.tv_sec*1000000+tv.tv_usec); \ - }) +#define BFA_TRC_TS(_trcm) (ktime_get_real_ns() / NSEC_PER_USEC) #ifndef BFA_TRC_TS #define BFA_TRC_TS(_trcm) ((_trcm)->ticks++) -- 1.9.1

9 years, 1 month

[PATCH] scsi: bfa: Remove struct timeval

by Amitoj Kaur Chawla

32 bit systems using 'struct timeval' will break in the year 2038, so we modify the code appropriately. This patch replaces the use of struct timeval and do_gettimeofday() with ktime_get_real_seconds() which returns a 64 bit seconds value. This patch also replaces u32 timestamp with u64 timestamp in bfi_ioc_ctrl_req_s structure to store the 64 bit seconds value returned by ktime_get_real_seconds() Signed-off-by: Amitoj Kaur Chawla <amitoj1606(a)gmail.com> --- drivers/scsi/bfa/bfa_ioc.c | 5 ++--- drivers/scsi/bfa/bfi.h | 2 +- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/bfa/bfa_ioc.c b/drivers/scsi/bfa/bfa_ioc.c index 98f7e8c..c52c3c3 100644 --- a/drivers/scsi/bfa/bfa_ioc.c +++ b/drivers/scsi/bfa/bfa_ioc.c @@ -15,6 +15,7 @@ * General Public License for more details. */ +#include <linux/ktime.h> #include "bfad_drv.h" #include "bfad_im.h" #include "bfa_ioc.h" @@ -1808,13 +1809,11 @@ static void bfa_ioc_send_enable(struct bfa_ioc_s *ioc) { struct bfi_ioc_ctrl_req_s enable_req; - struct timeval tv; bfi_h2i_set(enable_req.mh, BFI_MC_IOC, BFI_IOC_H2I_ENABLE_REQ, bfa_ioc_portid(ioc)); enable_req.clscode = cpu_to_be16(ioc->clscode); - do_gettimeofday(&tv); - enable_req.tv_sec = be32_to_cpu(tv.tv_sec); + enable_req.tv_sec = be64_to_cpu(ktime_get_real_seconds()); bfa_ioc_mbox_send(ioc, &enable_req, sizeof(struct bfi_ioc_ctrl_req_s)); } diff --git a/drivers/scsi/bfa/bfi.h b/drivers/scsi/bfa/bfi.h index 9ef91f9..aaa68bc 100644 --- a/drivers/scsi/bfa/bfi.h +++ b/drivers/scsi/bfa/bfi.h @@ -454,7 +454,7 @@ struct bfi_ioc_ctrl_req_s { struct bfi_mhdr_s mh; u16 clscode; u16 rsvd; - u32 tv_sec; + u64 tv_sec; }; #define bfi_ioc_enable_req_t struct bfi_ioc_ctrl_req_s; #define bfi_ioc_disable_req_t struct bfi_ioc_ctrl_req_s; -- 1.9.1

9 years, 1 month

Re: [Y2038] [Outreachy kernel] [PATCH] scsi: bfa: bfa_port: Remove struct timeval

by Arnd Bergmann

On Wednesday 04 November 2015 00:29:42 Arnd Bergmann wrote: > On Wednesday 28 October 2015 00:30:41 Amitoj Kaur Chawla wrote: > > 32 bit systems using 'struct timeval' will break in the year 2038, so > > we modify the code appropriately. > > > > This patch replaces the use of struct timeval and do_gettimeofday() > > with 64 bit ktime_get_real_seconds(). > > > > Signed-off-by: Amitoj Kaur Chawla <amitoj1606(a)gmail.com> > > This code looks like a copy of the bfa_svc.c file from your earlier patch, > and the same comments apply: Make sure that stats_reset_time has an > appropriate type, and convert to monotonic time. > To further clarify: when you change to using monotonic time, using a 32-bit variable to store the time is sufficient and you don't need to change the type, but you should still explain that in the patch description if you do it. Arnd

9 years, 1 month

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

Y2038 November 2015