The can subsystem communicates with user space using a bcm_msg_head header, which contains two timestamps. This is problematic for multiple reasons:
a) The structure layout is currently incompatible between 64-bit user space and 32-bit user space, and cannot work in compat mode (other than x32).
b) The timeval structure layout will change in 32-bit user space when we fix the y2038 overflow problem by redefining time_t to 64-bit, making new 32-bit user space incompatible with the current kernel interface. Cars last a long time and often use old kernels, so the actual users of this code are the most likely ones to migrate to y2038 safe user space.
This tries to work around part of the problem by changing the publicly visible user interface in the header, but not the binary interface. Fortunately, the values passed around in the structure are relative times and do not actually suffer from the y2038 overflow, so 32-bit is enough here.
We replace the use of 'struct timeval' with a newly defined 'struct bcm_timeval' that uses the exact same binary layout as before and that still suffers from problem a) but not problem b).
The downside of this approach is that any user space program that currently assigns a timeval structure to these members rather than writing the tv_sec/tv_usec portions individually will suffer a compile-time error when built with an updated kernel header. Fixing this error makes it work fine with old and new headers though.
We could address problem a) by using '__u32' or 'int' members rather than 'long', but that would have a more significant downside in also breaking support for all existing 64-bit user binaries that might be using this interface, which is likely not acceptable.
Signed-off-by: Arnd Bergmann arnd@arndb.de Cc: Oliver Hartkopp socketcan@hartkopp.net Cc: Marc Kleine-Budde mkl@pengutronix.de Cc: linux-can@vger.kernel.org Cc: linux-api@vger.kernel.org --- include/uapi/linux/can/bcm.h | 7 ++++++- net/can/bcm.c | 15 ++++++++++----- 2 files changed, 16 insertions(+), 6 deletions(-)
diff --git a/include/uapi/linux/can/bcm.h b/include/uapi/linux/can/bcm.h index 89ddb9dc9bdf..7a291dc1ff15 100644 --- a/include/uapi/linux/can/bcm.h +++ b/include/uapi/linux/can/bcm.h @@ -47,6 +47,11 @@ #include <linux/types.h> #include <linux/can.h>
+struct bcm_timeval { + long tv_sec; + long tv_usec; +}; + /** * struct bcm_msg_head - head of messages to/from the broadcast manager * @opcode: opcode, see enum below. @@ -62,7 +67,7 @@ struct bcm_msg_head { __u32 opcode; __u32 flags; __u32 count; - struct timeval ival1, ival2; + struct bcm_timeval ival1, ival2; canid_t can_id; __u32 nframes; struct can_frame frames[0]; diff --git a/net/can/bcm.c b/net/can/bcm.c index a1ba6875c2a2..6863310d6973 100644 --- a/net/can/bcm.c +++ b/net/can/bcm.c @@ -96,7 +96,7 @@ struct bcm_op { canid_t can_id; u32 flags; unsigned long frames_abs, frames_filtered; - struct timeval ival1, ival2; + struct bcm_timeval ival1, ival2; struct hrtimer timer, thrtimer; struct tasklet_struct tsklet, thrtsklet; ktime_t rx_stamp, kt_ival1, kt_ival2, kt_lastmsg; @@ -131,6 +131,11 @@ static inline struct bcm_sock *bcm_sk(const struct sock *sk) return (struct bcm_sock *)sk; }
+static inline ktime_t bcm_timeval_to_ktime(struct bcm_timeval tv) +{ + return ktime_set(tv.tv_sec, tv.tv_usec * NSEC_PER_USEC); +} + #define CFSIZ sizeof(struct can_frame) #define OPSIZ sizeof(struct bcm_op) #define MHSIZ sizeof(struct bcm_msg_head) @@ -953,8 +958,8 @@ static int bcm_tx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg, op->count = msg_head->count; op->ival1 = msg_head->ival1; op->ival2 = msg_head->ival2; - op->kt_ival1 = timeval_to_ktime(msg_head->ival1); - op->kt_ival2 = timeval_to_ktime(msg_head->ival2); + op->kt_ival1 = bcm_timeval_to_ktime(msg_head->ival1); + op->kt_ival2 = bcm_timeval_to_ktime(msg_head->ival2);
/* disable an active timer due to zero values? */ if (!op->kt_ival1.tv64 && !op->kt_ival2.tv64) @@ -1134,8 +1139,8 @@ static int bcm_rx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg, /* set timer value */ op->ival1 = msg_head->ival1; op->ival2 = msg_head->ival2; - op->kt_ival1 = timeval_to_ktime(msg_head->ival1); - op->kt_ival2 = timeval_to_ktime(msg_head->ival2); + op->kt_ival1 = bcm_timeval_to_ktime(msg_head->ival1); + op->kt_ival2 = bcm_timeval_to_ktime(msg_head->ival2);
/* disable an active timer due to zero value? */ if (!op->kt_ival1.tv64)